This PMD supports hotplug, it is able to be detached.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
For larger packet size congestion is observed on Tx Queues.
This patch enables Tx Queue congestion state check support.
If congested, try to resend the packet few times.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
when creating a bond device in testpmd, a name for a device must meet
the correct convention described in the documentation:
The device name must start with the net_bonding prefix
followed by numbers or letters.
Change for ALB mempool allocation - mem_name was too long.
Fixes: 9bf4901d1a ("bus/vdev: remove probe with driver name option")
Cc: stable@dpdk.org
Signed-off-by: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
Reviewed-by: Jingjing Wu <jingjing.wu@intel.com>
ctype.h is not compilable in BSD 10 on GCC 4.8 in C11 mode.
CC failsafe.o
In file included from /usr/include/_ctype.h:94:0,
from /usr/include/ctype.h:46,
from /root/dpdk.org/build/include/rte_common.h:50,
from /root/dpdk.org/build/include/rte_memory.h:57,
from /root/dpdk.org/build/include/rte_malloc.h:45,
from /root/dpdk.org/drivers/net/failsafe/failsafe.c:35:
/usr/include/runetype.h:92:22: error: expected '=', ',', ';', 'asm' or
'__attribute__' before 'const'
extern _Thread_local const _RuneLocale *_ThreadRuneLocale;
^
/usr/include/runetype.h: In function '__getCurrentRuneLocale':
/usr/include/runetype.h:96:6: error: '_ThreadRuneLocale' undeclareds
(first use in this function)
if (_ThreadRuneLocale)
^
The fix is to put GCC in gnu99 mode instead.
Fixes: a46f8d584e ("net/failsafe: add fail-safe PMD")
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
This patch add support for setting additional aggregator modes for
IEEE802.3AD in similar manner that are supported in kernel mode.
This will add support for other manner:
stable - default mode taken from IEEE802.11AX this is default
aggregator mode
bandwidth - takes aggregator with highest bandwidth
count - takes aggregator with biggest number of slaves
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
i40e VF close would stop the VF first, if VF already stopped this
result duplicate add/del MAC address which cause failure in executing
admin command.
Fix this by adding VF stop status check and sync up VF MAC address count
during add/del.
Fixes: d42aaf3000 ("i40e: support port hotplug")
Cc: stable@dpdk.org
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
x550 devices don't map interrupt vector before enabling Rx/Tx queue
interrupt.
Because of this interrupt mode is not working for x550 devices.
Fixes: d2e72774e5 ("ixgbe/base: support X550")
Cc: stable@dpdk.org
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
Add queue index check when create filter rule, or
filter with invalid queue id can be created successfully.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Listen to INTR_RMV events issued by slaves.
Add atomic flags on slave queues to detect use of slave bursts function.
If a removal is detected, set the recollection flag on this slave.
During a slave upkeep round, if its recollection flag is set and its
burst functions are not in use by any thread, remove that slave.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Add the "exec" device type.
The parameters given to this type of device will be executed in a shell.
The output of this command is then used as a definition for a device.
That command can be re-interpreted if the related device is not
plugged-in. It allows for a device definition to react to system
changes (e.g. changing PCI bus for a given device).
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Periodically check for the existence of a device.
If a device has not been initialized and exists on the system, then it
is probed and configured.
The configuration process strives to synchronize the states between the
plugged-in sub-device and the fail-safe device.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Introduce the fail-safe poll mode driver initialization and enable its
build infrastructure.
This PMD allows for applications to benefit from true hot-plugging
support without having to implement it.
It intercepts and manages Ethernet device removal events issued by
slave PMDs and re-initializes them transparently when brought back.
It also allows defining a contingency to the removal of a device, by
designating a fail-over device that will take on transmitting operations
if the preferred device is removed.
Applications only see a fail-safe instance, without caring for
underlying activity ensuring their continued operations.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
The x550 family does not support ipv6-other flow as well as
ipv4-other flow, so add this limitation.
Fixes: 7d629caced ("net/ixgbe: enable IPv6 for consistent API")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
82599ES can support SCTP packet drop action, but the
configuration is different from TCP or UDP packet, so
it need to rework some FDIR related code to adapt
drop action rule of SCTP packet.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Previously SW workaround for GL_SWR_PRI_JOIN_MAP is added for X710
performance. As new FW version 6.0 supports ADQ,
value for GL_SWR_PRI_JOIN_MAP should be changed, otherwise
ehtertype filter will be impacted.
Fixes: 973273c7a4 ("i40e: workaround for X710 performance")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Remove checks of Linux kernel version
in order to support kernel with backported features.
the expected behavior with a kernel that doesn't support flower
and other bits is the following:
-flow validate can return successfully
-flow create using the same rule fails.
Using the "remote" feature without kernel flower does not fail silently.
The TAP instance is not initialized if the requested parameters cannot
be satisfied.
it has been tested on an old kernel without required support:
PMD: Kernel refused TC filter rule creation (2): No such file or directory
PMD: tap0 failed to create implicit rules.
PMD: Can't set up remote feature: No such file of directory(2)
PMD: TAP Unable to initialize net_tap0
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Acked-by: Pascal Mazon <pascal.mazon@6wind.com>
Drop action is not supported by signature match, should return
error when try to create a signature match flow with drop action.
Fixes: a948d33bc0 ("net/ixgbe: enable signature match for consistent API")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
PF driver and VF driver communicated with each other by virtual
channel message. When VF sends message to PF to enable some
offload capability, PF should response if it is successful or not.
VIRTCHNL_OP_ENABLE_VLAN_STRIPPING is a new added message and the
old PF driver doesn’t support that. So no response is received by
DPDK VF. Then VF is blocked on this message and cannot roll back.
This patch clears pending command on VF side when the waiting duration
expires to avoid blocking following communication.
Fixes: 5f0b95d59a ("net/i40e: support VLAN stripping for VF")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
There's only invalid queue id checking for PF when creating FDIR
rules, this patch adds checking invalid queue id for VF.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
If LSC flag is changed to off at last device start, the
enable flag is not cleared in HW.
This patch fixes it.
Fixes: c3cd3de0ab ("igb: enable Rx queue interrupts for PF")
Cc: stable@dpdk.org
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
If LSC flag is changed to off at last device start, the
enable flag is not cleared in HW.
This patch fixes it.
Fixes: f4668a33ef ("net/i40e: fix link status change interrupt")
Cc: stable@dpdk.org
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
If LSC flag is changed to off at last device start, the
enable flag is not cleared in HW.
This patch fixes it.
Fixes: 0eb609239e ("ixgbe: enable Rx queue interrupts for PF and VF")
Cc: stable@dpdk.org
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
On a host having 128B cacheline size, some devices insert 64B padding in
each completion entry to avoid partial cacheline write by HW. But, as the
padding is ahead of completion data, casting a completion entry to
compressed mini-completions must start from the middle of the completion.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
cq_limit field is added in cn88xx-pass2 and subsequent
versions. Reflect the change in the sq_config structure.
This change is backward compatible as the old pass versions
ignore this field.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Tx CRC size is not counted by VSI's stats register, so it is not necessary
excluded by driver.
Fixes: 98abce237b ("net/i40e: fix VF statistics")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
If MAC stats refresh is arranged to be done by periodic DMA,
the first DMA transaction is unlikely to occur right on the
port start; if the user tries to get stats right after port
start and before the transaction occurs, bogus figures will
be collected; a one-off stats upload on port start is a fix
Fixes: 1caab2f1e6 ("net/sfc: add basic statistics")
Cc: stable@dpdk.org
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Some logs are missing the newline character \n.
The logs using only one line can be checked with this command:
git grep 'RTE_LOG(.*".*[^n]"' drivers/net/ring/
Fixes: 61934c0956 ("ring: convert to use of PMD_REGISTER_DRIVER and fix linking")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Some logs are missing the newline character \n.
The logs using only line can be checked with this command:
git grep 'RTE_LOG(.*".*[^n]"' drivers/net/tap/
Fixes: 02f96a0a82 ("net/tap: add TUN/TAP device PMD")
Fixes: 268483dc20 ("net/tap: add preliminary support for flow API")
Fixes: 2bc06869cd ("net/tap: add remote netdevice traffic capture")
Fixes: bf7b7f437b ("net/tap: create netdevice during probing")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Pascal Mazon <pascal.mazon@6wind.com>
Add the support of the Traffic Management API,
rte_tm_hierarchy_commit.
When calling this API, the driver tries to enable
the TM configuration on HW.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
To support QoS scheduler APIs, create a new C file for
the TM (Traffic Management) ops but without any function
implemented.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add the support of the Traffic Management API,
rte_tm_hierarchy_commit.
When calling this API, the driver tries to enable
the TM configuration on HW.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
To support QoS scheduler APIs, create a new C file for
the TM (Traffic Management) ops but without any function
implemented.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Used rte_log2_u32() to replace integer log2() to
remove libm dependency.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
NXP Copyright has been wrongly worded with '(c)' at various places.
This patch removes these extra characters. It also removes
"All rights reserved".
Only NXP copyright syntax is changed. Freescale copyright is not
modified.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Virtual device/driver probing done via name.
A new alternative method introduced to probe the device with providing
driver name in devargs as "driver=<driver_name>".
This patch removes alternative method and fixes virtual device usages
with proper device names.
Fixes: 87c3bf29c6 ("test: do not short-circuit null device creation")
Fixes: d39670086a ("eal: parse driver argument before probing drivers")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
The current virtio supports Transmit Segmentation Offload, but
does not really support Large Receive Offload. The driver was confusing
the two offloads.
Fixes: 86d59b2146 ("net/virtio: support LRO")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
The virtio driver is confused about the meaning of the ip_checksum
flag. In DPDK, ip_checksum means the hardware is capable of checking
the Layer 3 IP checksum. But KVM/QEMU does not do that. The flag
VIRTIO_NET_F_GUEST_CSUM controls whether the receive side does
Layer 4 (TCP/UDP) checksum offload.
Fix by erroring out any requests to do IP checksum.
Fixes: 96cb671193 ("net/virtio: support Rx checksum offload")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Replace the incorrect reference to "Cavium Networks", "Cavium Ltd"
company name with correct the "Cavium, Inc" company name in
copyright headers.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Since "rte_eal_dev_init()" has been removed, the comment referred to
it should be modified simultaneously.
Fixes: 9721b4d543 ("eal: remove unused device init function")
Signed-off-by: Yong Wang <wang.yong19@zte.com.cn>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
The rte_eth_dev.data pointer is set to a reference to a static table.
Attempting to rte_free() it leads to a panic. For example, the
following commands result in a panic if run in testpmd
testpmd> port attach virtio_user0,path=/dev/vhost-net,iface=test0
testpmd> port stop 2
testpmd> port close 2
testpmd> port detach 2
Fixes: ce2eabdd43 ("net/virtio-user: add virtual device")
Cc: stable@dpdk.org
Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
To make vectorized burst routines enabled, it is required to run on x86_64
architecture. If all the conditions are met, the vectorized burst functions
are enabled automatically. The decision is made individually on RX and TX.
There's no PMD option to make a selection.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
The callbacks are global to a device but the selection is made every queue
configuration, which is redundant.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
When searching LKEY, if search key is mempool pointer, the 2nd cacheline
has to be accessed and it even requires to check whether a buffer is
indirect per every search. Instead, using address for search key can reduce
cycles taken. And caching the last hit entry is beneficial as well.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
When processing Tx completion, it is more efficient to free buffers in bulk
using rte_mempool_put_bulk() if buffers are from a same mempool.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
For Tx SW ring (txq->elts[]), indexes are kept and used in
txq->elts_head/tail. Because of this, one entry must always be left unused
and it also makes code complex. Changed to store counters instead of
indexes in order to make the code simpler and to reduce a few calculations.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Currently, if requested MTU is bigger than mbuf size and scattered
receive is not enabled, setting MTU to that value fails.
This patch allows setting this special MTU when device is stopped,
because scattered_rx will be re-configured during next port start
and driver may enable scattered receive according new MTU value.
After this patch, driver may select different receive function
automatically after MTU set, according MTU values selected.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch removes restrictions in bonded device library which prevent a
bonded device to be added to another bonded device with the limitation
that 802.3ad mode is not supported if one or more slaves is also a
bonded device,
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
This patch fixes the management of link properties in the bonded device.
In all mode except mode 4 a bonded device link will default to reporting
the link as full duplex and auto-neg. The link speed for a bond port is
calculated on it's active slaves and the particular mode it is running
in. The bonding link speed is reported based on the transmit link as in
some modes link speed between egress/ingress is not symmetrical.
- round-robin, balance, 802.3ad, TLB and ALB modes all report the link
speed as the sum of the speed of each active slave.
- active backup link speed is reported as the speed of the current
primary slave
- broadcast is reported as the minimum of value of the active slaves
link speeds.
In mode 4 (link aggregation 802.3ad) the properties of the first slave
added to the bonded device are slave and subsequent slaves are verified
to have the same properties.
Finally in the bond_ethdev_lsc_event_callback function the link
properties of the device are updated after any change to the number of
active slaves.
Fixes: 2efb58cbab ("bond: new link bonding library")
Cc: stable@dpdk.org
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Enable IPv6 support with rte_flow API.
Only supports signature Match.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Enable signature match for rte_flow API.
RTE_FLOW_ITEM_TYPE_FUZZY specify a signature match.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Code cleanup done for 2 purposes.
1. "index" variable is no more needed.
2. inline function makes it easier and safer to nest into a loop.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This commit adds support for the flow API RSS action with the following
limitations:
- Only supported when isolated mode is enabled.
- The number of queues specified by the action (rte_flow_action_rss.num)
must be a power of two.
- Each queue index can be specified at most once in the configuration
(rte_flow_action_rss.queue[]).
- Because a queue can be associated with a single RSS context, it cannot
be targeted by multiple RSS actions simultaneously.
Signed-off-by: Vasily Philipov <vasilyf@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
A special "parent" queue must be allocated in addition to a group of
standard Rx queues for RSS to work. This is done automatically outside of
isolated mode by the PMD when applications request several Rx queues.
Since each configured flow rule with the RSS action may target a different
set of queues, the PMD must have the ability to dynamically allocate
several parent queues, one per RSS group.
If isolated mode was requested the default RSS parent queue isn't created
in this case.
Refactor RSS parent queue allocations (currently limited to a single
parent) in preparation for flow API RSS action support.
Signed-off-by: Vasily Philipov <vasilyf@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The user must request isolated mode before device configuration.
Signed-off-by: Vasily Philipov <vasilyf@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Refactor vmxnet3_post_rx_bufs() to call vmxnet3_renew_desc()
to update the newly allocated mbufs. While here, relocate the
relevant comments to vmxnet3_renew_desc().
Signed-off-by: Chas Williams <ciwillia@brocade.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
In debug mode, all mbuf ol_flags are temporarily enabled while sitting
in the Rx queue to detect otherwise silent data corruption, however
some of them are special (indirect and control) and must be cleared
before returning mbufs to the pool to avoid crashing.
Fixes: 7fae69eeff ("mlx4: new poll mode driver")
CC: stable@dpdk.org
Signed-off-by: Vasily Philipov <vasilyf@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Internal Rx packet bytes is over counted, CRC size is not excluded,
that cause incorrect Rx bytes or even negative value.
Fixes: 0bcdc44510 ("net/i40e: exclude internal packet's byte count")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Add support for hardware flow classification of LACP control plane
traffic to be redirect to a dedicated receive queue on each slave which
is not visible to application. Also enables a dedicate transmit queue
for LACP traffic which allows complete decoupling of control and data
paths.
This only applies to bonding devices running in mode 4
(link-aggregation-802.3ad).
Introduce two new APIs to support enable/disabled of dedicated
queues.
- rte_eth_bond_8023ad_dedicated_queues_enable
- rte_eth_bond_8023ad_dedicated_queues_disable
rte_eth_bond_8023ad_dedicated_queues_enable must be called before
bonding port is configured or started to reserved and configure the
dedicated queues.
When this option is enabled all slaves must support flow filtering
by Ethernet type and support one additional Tx and Rx queue on
each slave.
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Use packet types flags in mbuf to provide hint for filtering of LACP
control plane traffic from the data path.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
This patch fixes the maximum number of Tx an Rx queues supported by a
bonding device return by the rte_eth_dev_info_get function.
The bonding device now calculates the maximum number of supported Tx
and Rx queues based on the slaves bound to the bonded device, with the
minimum values of Tx and Rx queues from the device slaves being the
bonded devices maximum, as each slave must be able to support the same
number of Tx and Rx queues.
Fixes: 2efb58cbab ("bond: new link bonding library")
Cc: stable@dpdk.org
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Uninitialized memory could cause memory corruption, by indicating
completion of the invalid mbuf.
Fixes: 3d3edc265f ("net/ena: make coherent memory allocation NUMA-aware")
Cc: stable@dpdk.org
Signed-off-by: Alexander Matushevsky <matua@amazon.com>
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
After cleanup of the mbuf on Tx path, queue was still pointing to this
mbuf and upon cleanup of the Tx buffers, it was being freed second time.
Moreover, to make sure that upon interrupt all mbufs will be freed,
whole ring is being cleaned up instead of part of it - originally only
range between head and tail was being cleaned up.
Fixes: 1173fca25a ("ena: add polling-mode driver")
Cc: stable@dpdk.org
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
VLAN stripping configuration is supported only for DPDK PF
previously. Since kernel PF supports VLAN stripping now, this
patch adds VLAN stripping support for both DPDK PF and kernel
PF.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Convert DP_NOTICE() to DP_ERR() as appropriate in PMD files.
Change DP_NOTICE() macro to make use of boolean flag to log
it as error message or informational message.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Since nb_max is a u16 it can store value up to 65535 only (not 64K),
but this value is not a power-of-2. So limit the ring sizes to 32K.
Signed-off-by: Harish Patil <harish.patil@cavium.com>
Log HW errmsg on the stdout and do minimal handling to prevent HW
attentions from being reasserted.
Signed-off-by: Harish Patil <harish.patil@cavium.com>
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Implement the macro OSAL_DMA_FREE_COHERENT to release DMA memories.
Track all DMA memory allocations using an array of memzone pointers and
use that to free memory resources along with other resource deallocation.
With this change there is no need to alter the base code to additionally
pass an unique string needed for memzone creation.
Fixes: ec94dbc573 ("qede: add base driver")
Cc: stable@dpdk.org
Signed-off-by: Harish Patil <harish.patil@cavium.com>
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
The bonded device does not have to be a PCI device. Use the rte_ethdev
functions instead.
Signed-off-by: Wen Chiu <wchiu@brocade.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
If the numa node is unknown, use the value from rte_socket_id() to avoid
an allocation failure.
Signed-off-by: Eric Kinzie <ekinzie@brocade.com>
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Add support for inner/outer L3/L4 TX csum offload for MPLS-in-UDP packets.
The driver checks for PKT_TX_TUNNEL_MPLSINUDP in Tx ol_flags and updates TX
BD elements with appropriate offsets/length of tunnel headers.
The pseudo csum calculation is removed from qede_xmit_prep_pkts() since its
not needed.
Signed-off-by: Harish Patil <harish.patil@cavium.com>
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Fix an error message. Probably a copy/paste error.
Fixes: 36735a932c ("net/bnxt: support set VF QOS and MAC anti spoof")
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
bnxt_hwrm_port_phy_cfg() was not setting enables appropriately.
This was causing undesired issues with link config.
This patch takes care of that.
Fixes: 7bc8e9a227 ("net/bnxt: support async link notification")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We are not passing proper speed mask causing autoneg to not work
properly on 10GBase-T links. Use supported speeds from phy_qcfg
for auto mask to fix this.
Fixes: 7bc8e9a227 ("net/bnxt: support async link notification")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch fixes the get link configuration code.
bnxt_get_hwrm_link_config was using wrong macros and wrongly
deriving link speed based on link status which was causing
incorrect link information to be displayed in few scenarios.
Fixes: 7bc8e9a227 ("net/bnxt: support async link notification")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add code to avoid automatic clearing of VF stats on a function
reset or a stat context free.
Add rte_pmd_bnxt_set_vf_persist_stats() PMD specific API.
Fixes: dd46c6bbd5 ("net/bnxt: support get and clear VF specific stats")
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Previously, no VNICs were allocated as the default VNIC,
even if they were configured as one. This patch fixes that error.
Fixes: db678d5c2b ("net/bnxt: add HWRM VNIC configure")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We used the default as a work-around for the 4-byte MTU VNICs,
but we filter those out now. So fix the calculation of VNICs
accordingly.
Fixes: ff63ebbb67 ("net/bnxt: determine the Rx status of VF")
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Set the MTU of the device to MAX size possible.
Fixes: b7778e8a1c ("net/bnxt: refactor to properly allocate resources for PF/VF")
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch adds support for Stratus VF devices.
Other than adding the VF device ID, we also are adding
support for short message format.
The new short firmware message of size 16 bytes points to a location
in host memory that contains the firmware message that the driver
wants the adapter to process. This indirection requires the
firmware to DMA the message into its own memory for processing.
When the firmware receives a Short Command Format, it will DMA the
firmware message from host memory into its internal memory and then
processes the message as it would have if it received the message
directly in the firmware communication channel.
With BCM57454, the number of VFs increase to 1K and so the requirement
for firmware communication channel memory on adapter becomes expensive.
The short firmware message saves the amount of memory required to support
1K VFs on adapter.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This commit addresses a compilation issue against Glibc >= 2.25, which
implements assert() through a nonstandard ({ }) construct. Such constructs
can normally not be used without __extension__ keyword when -pedantic is
enabled, as is the case when compiling mlx4 and mlx5 PMDs in debug mode.
While assert.h checks for the compiler ability to support GNU extensions,
Clang, unlike GCC, does not allow the above syntax when combining
-std=gnu99 with -pedantic.
Work around missing keyword by moving these PMDs to a stricter compliance
standard without GNU extensions but properly checked by Glibc. Doing so is
supported on the DPDK side since includes have been cleaned up.
Even in C11, using types other than _Bool or signed/unsigned int for
bit-fields is an extension. Some GCC versions complain about that when
-pedantic checks are enabled.
The RTE_STD_C11 macro correctly prevented this issue with C99 but not with
C11 as it becomes a no-op. Forcing the extension keyword addresses it.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Tested-by: Yongseok Koh <yskoh@mellanox.com>
In 2 modes (802.3ad and TLB) of the link bonding driver, monitoring of
link status is used to determine the active slaves to use. These
functions are currently using the rte_link_link_get which could block
for up to 9 seconds, depending on the slave device.
In the 802.3ad periodic callback and in the TLB slave callback the
link status of slaves are checked using rte_eth_link_get function.
This patch changes to the no-wait version of the link get function to
avoid the possible issues which could be introduced if this call was
to block for an extended period of time.
Fixes: 46fb436836 ("bond: add mode 4")
Fixes: 7c76a747e6 ("bond: add mode 5")
Cc: stable@dpdk.org
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
In function i40e_vsi_config_tc_queue_mapping(), if 'enabled_tcmap' is 0,
'total_tc' might be 0. Then 'total_tc' might be used in a division
by 0 in "qpnum_per_tc = i40e_align_floor(vsi->nb_qps / total_tc)".
Fix it by changing 'total_tc' from 0 to 1 just as func
i40e_vsi_update_queue_mapping() does.
Fixes: 4861cde461 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Yong Wang <wang.yong19@zte.com.cn>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
In current implementation, when checking VF link state, PF state
is checked too, although the function has a parameter to tell
if PF state checking is needed.
But in some scenario, user may not care about the PF state.
This patch enables the unused parameter to only check the VF
link state.
Signed-off-by: Liang-Min Larry Wang <liang-min.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Repairs a bug in the stats_reset where the wrong queue was
being passed into Tx reset.
Fixes: 727b3fe292 ("net/ark: integrate PMD")
Cc: stable@dpdk.org
Signed-off-by: John Miller <john.miller@atomicrules.com>
This change allows a user extension to provide unique private
callback data for all ports.
Arkville is a single-function multi-port device. User_data resides
in the singleton Arkville structure. This structure is shared across
all ports.
With this patch, we are providing a unique user pointer for each port
rather than a common pointer across multiple ports.
Signed-off-by: John Miller <john.miller@atomicrules.com>
Use port type to determine the supported speed capabilities.
Fixes: e274f57322 ("ethdev: add speed capabilities")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
When starting a vmxnet3 device, it is always writing the permanent MAC
address, even if a different MAC address was configured. Write from
the device data instead which holds the current one.
Signed-off-by: George Wilkie <gwilkie@brocade.com>
Acked-by: Shrikrishna Khare <skhare@vmware.com>
Make vmxnet3_process_events less noisy by removing logging when there
are no events to process and by making link, device-change and debug
events DEBUG level rather than ERR.
Change these to use PMD_DRV_LOG instead of PMD_INIT_LOG since they
don't happen at device init.
Signed-off-by: Robert Shearman <rshearma@brocade.com>
Acked-by: Shrikrishna Khare <skhare@vmware.com>
Generate link-state change notifications by listening to interrupts
generated by the device. Make use of the existing
vmxnet3_process_events function that was compiled out, but change it
to call vmxnet3_dev_link_update on a VMXNET3_ECR_LINK event and to not
be so noisy in its log messages.
Enable interrupts on starting the device, using a new helper function,
vmxnet3_enable_intr, based on vmxnet3_disable_intr and validated
against the FreeBSD driver.
Keep track of the number of interrupts registered for to avoid
hardcoding these in vmxnet3_enable/disable_intr and to provision for
any future rxq intr support.
Factor out the guts of vmxnet3_dev_link_update minus the started check
to allow the new function to be called from vmxnet3_dev_start in the
lsc-enabled case to ensure that the link state is correctly set from
the actual state at that point.
Signed-off-by: Robert Shearman <rshearma@brocade.com>
Implement xstats_get() to allow a number of driver-specific Tx and Rx
stats to be retrieved.
Signed-off-by: Robert Shearman <rshearma@brocade.com>
Acked-by: Shrikrishna Khare <skhare@vmware.com>
Most NICs like virtio, igb/ixgbe etc. don't reset counters on
dev_start and arguably this helps in monitoring the counters
across a longer time span with multiple device start/stops.
vmxnet3 behavior is opposite to that and counters are reset by
the host side implementation each time the device is restarted.
Change the driver to save the counters in its private context
before it is reset by writing CMD_ACTIVATE to REG_CMD.
Signed-off-by: Nachiketa Prachanda <nprachan@brocade.com>
Acked-by: Shrikrishna Khare <skhare@vmware.com>
When exiting a DPDK application, the TAP remote was left
with the link down even if it was initially up.
The device flags of the remote netdevice are saved when probing,
and restored when calling the close function.
The remote state is not set down when calling the stop function anymore.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Pascal Mazon <pascal.mazon@6wind.com>
This patch adds ability to remove already loaded profile
or write profile without registering it
Signed-off-by: Andrey Chilikin <andrey.chilikin@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
TPID can be set by set_switch_config aq, change the TPID setting
by set_switch_config on new FW release.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
This patch adds extended processing of DDP packages:
- Execution of adminq command sections to support AQ-depended profiles,
for example, for programming cloud filters types.
- Ability to write a profile without registering it in the list of
applied profiles, to be used for AQ-depended profiles.
- Profile rollback is implemented to support restoration of original
parser/analyzer configuration without the need of core reset,
for example, for deploying new profile without resetting device.
- Search for a specific section in a profile, to be used by driver
to access metadata sections with description of PCTYPE/PTYPEs
defined in the profile.
Signed-off-by: Andrey Chilikin <andrey.chilikin@intel.com>
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
This patch allows detection of upcoming core reset in case NIC gets
stuck while performing FLR reset. The i40e_pf_reset() function returns
I40E_ERR_NOT_READY when global reset was detected.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Instead of accessing register directly, use newly added AQC in
order to blink LEDs. Introduce and utilize a new flag to prevent
excessive API version checking.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Adds double VLAN tagging ethertype fields to Set Switch Parameters AQ
command. These were added in firmware API 1.7.
Callers of i40e_aq_set_switch_config() can specify the ethertypes to
use by filling out the corresponding fields in struct i40e_hw.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
This patch adds new phy types for 25G Active Optical Cables (AOC) and
Active Copper Cables (ACC) support.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Store information about FEC modes, that were requested. It will be used
in printing link status information function and this way there is no
need to call admin queue there.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
During NVMupdate, state machine gets into unrecoverable state because
i40e_clean_adminq_subtask can get scheduled after the admin queue
command but before other state variables are updated.
This patch adds locking around admin queue command and update of
state variables so that adminq_subtask will have accurate information
whenever it gets scheduled.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Modify the necessary files to be compatible with the new virtchnl.h file
instead of relying on i40e_virtchnl.h variant. This mostly changes
references to VIRTCHNL_ variables by removing prefix of I40E_.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
According to the standard, state machine of LACP should transmit lacpdu
when partner's state changes from slow to fast, rather than from fast
to slow.
Fixes: 46fb436836 ("bond: add mode 4")
Cc: stable@dpdk.org
Signed-off-by: Sha Zhang <zhangsha.zhang@huawei.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
When a port is using a bogus SFP, the PCI probing returns an error,
preventing to register a portid.
To give a better chance to the applications to retry after the SFP is
changed, move this check in eth_i40e_dev_configure(), so that only a
port reconfiguration is needed to retry.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Configuring the MC FW to configure data alignment by default.
This help in improving performance for some of the platform variants.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
After adding a fdir rule for IPv6 with input set TC, IPv6 packets
with the specific TC can't be assigned the right queue.
The root cause is that TC is parsed wrongly, this patch fixes
TC parsing problem.
Fixes: 7d83c152a2 ("net/i40e: parse flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Fm10k host driver can't manage PHY directly and provides a fake link
status by always reporting LINK_UP. We should initialize link status
in device start, otherwise application will get LINK_DOWN status
when LSC configured.
Fixes: 9ae6068c86 ("fm10k: add dev start/stop")
Cc: stable@dpdk.org
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
In case on multi segment packet, the TSO segment size
was taken from the last segment. This may lead to incorrect
values in case not all segments are initialized with the field.
Fixing it by taking the value from the first segment.
Fixes: 3f13f8c23a ("net/mlx5: support hardware TSO")
Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
The interrupt handler can sometimes be triggered for reasons other than a
link status event. An assertion failure happen when such events occur while
an asynchronous link status update is already scheduled.
Address this issue using the same approach as its mlx5 counterpart,
commit a9f2fbc42f ("net/mlx5: fix inconsistent link status")
Fixes: c4da6caa42 ("mlx4: handle link status interrupts")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
igb flex filter supports recognizing any arbitrary pattern within first
128 bytes of the packet.
But the macro E1000_FLEX_FILTERS_MASK_SIZE only covers first 64 bytes.
Fixes: 231d43909a ("igb: migrate flex filter to new API")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
There is a bug in flex type filter parsing because of wrong local
variable index usage.
Bug cause filter to fail and wrong mask calculation.
Fixes: 7cd77faf71 ("net/igb: parse flow API flex filter")
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
This commit addresses various issues that may lead to undefined behavior
when configuring Rx interrupts.
While failure to create a Rx queue completion channel in rxq_ctrl_setup()
prevents that queue from being created, existing queues still have theirs.
Since the error handler disables dev_conf.intr_conf.rxq as well, subsequent
calls to rxq_ctrl_setup() create Rx queues without interrupts. This leads
to a scenario where not all Rx queues support interrupts; missing checks on
the presence of completion channels may crash the application.
Considering that the PMD is not supposed to disable user-provided
configuration parameters (dev_conf.intr_conf.rxq), and that these can
change for subsequent rxq_ctrl_setup() calls anyway, properly supporting a
mixed mode where not all Rx queues have interrupts enabled is a better
approach.
To do so with a minimum set of changes, priv_intr_efd_enable() and
priv_create_intr_vec() are first refactored as a single
priv_rx_intr_vec_enable() function (same for their "disable" counterparts).
Since they had to be used together, there was no point in keeping them
separate.
Remaining changes:
- Always clean up before reconfiguring interrupts to avoid memory leaks.
- Always clean up when closing the device.
- Use malloc()/free() instead of their rte_*() counterparts since there is
no need to store the vector in huge pages-backed memory.
- Allow more Rx queues than the size of the event file descriptor array as
long as Rx interrupts are not requested on all of them.
- Properly clean up interrupt handle when disabling Rx interrupts (nb_efd
and intr_vec reset to 0).
- Check completion channel presence while toggling Rx interrupts on a given
queue.
Fixes: 3c7d44af25 ("net/mlx5: support user space Rx interrupt event")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
A negative return value is documented for that function in case of error.
Fixes: 3c7d44af25 ("net/mlx5: support user space Rx interrupt event")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Not exposing Rx interrupts callbacks when this feature is unsupported is
less intrusive than having two different versions for these functions.
Fixes: 3c7d44af25 ("net/mlx5: support user space Rx interrupt event")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
These functions do not belong to the data path. Their prototypes are also
misplaced.
Fixes: 3c7d44af25 ("net/mlx5: support user space Rx interrupt event")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This commit addresses various issues that may lead to undefined behavior
when configuring Rx interrupts.
While failure to create a Rx queue completion channel in rxq_setup()
prevents that queue from being created, existing queues still have theirs.
Since the error handler disables dev_conf.intr_conf.rxq as well, subsequent
calls to rxq_setup() create Rx queues without interrupts. This leads to a
scenario where not all Rx queues support interrupts; missing checks on the
presence of completion channels may crash the application.
Considering that the PMD is not supposed to disable user-provided
configuration parameters (dev_conf.intr_conf.rxq), and that these can
change for subsequent rxq_setup() calls anyway, properly supporting a mixed
mode where not all Rx queues have interrupts enabled is a better approach.
To do so with a minimum set of changes, priv_intr_efd_enable() and
priv_create_intr_vec() are first refactored as a single
priv_rx_intr_vec_enable() function (same for their "disable" counterparts).
Since they had to be used together, there was no point in keeping them
separate.
Remaining changes:
- Always clean up before reconfiguring interrupts to avoid memory leaks.
- Always clean up when closing the device.
- Use malloc()/free() instead of their rte_*() counterparts since there is
no need to store the vector in huge pages-backed memory.
- Allow more Rx queues than the size of the event file descriptor array as
long as Rx interrupts are not requested on all of them.
- Properly clean up interrupt handle when disabling Rx interrupts (nb_efd
and intr_vec reset to 0).
- Check completion channel presence while toggling Rx interrupts on a given
queue.
Fixes: 9f05a4b818 ("net/mlx4: support user space Rx interrupt event")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Moti Haimovsky <motih@mellanox.com>
Several Ethernet device structures are allocated on top of a common PCI
device for mlx4 adapters with multiple ports. These inherit a common
interrupt handle from their parent PCI device, which prevents Rx interrupts
from working properly on all ports as their configuration is overwritten.
Use a local interrupt handle to address this issue.
Fixes: 9f05a4b818 ("net/mlx4: support user space Rx interrupt event")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Moti Haimovsky <motih@mellanox.com>
With this patch, it is possible to enable or disable the isolate
feature anytime, even immediately after a probe while the tap has not
been configured yet. It will do its job as soon as the netdevice gets
created.
A specific implicit flow rule is created with the lowest priority (all
other flow rules will be evaluated before), at the end of the list. If
isolated mode is enabled, the associated action will be to drop the
packet. Otherwise, the action would be passthrough.
In case of a remote netdevice, implicit rules on it will be removed in
isolated mode, to ensure only actual flow rules redirect packets to the
tap.
Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>
Drop flows being created when the port is stop should not access to the
drop table hash queues as it is invalid.
Fixes: 028761059a ("net/mlx5: use an RSS drop queue")
Cc: stable@dpdk.org
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Macro for alignment is defined in the common library.
Use macro from the common library in own macro definition.
Signed-off-by: Matej Vido <vido@cesnet.cz>
Hardware PTYPE in Rx desc will be parsed to fill mbuf's packet_type.
Signed-off-by: Ray Kinsella <ray.kinsella@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The current drop action is implemented as a queue tail drop,
requiring to instantiate multiple WQs to maintain high drop rate.
This commit, implements the drop action in hardware classifier.
This enables to reduce the amount of contexts needed for the drop,
without affecting the drop rate.
Signed-off-by: Shachar Beiser <shacharbe@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
In some environments, the PCI domain can be larger than 16 bits.
For example, a PCI device passed through in Azure gets a synthetic domain
id which is internally generated based on GUID. The PCI standard does
not restrict domain to be 16 bits.
This change breaks ABI for API's that expose PCI address structure.
The printf format for PCI remains unchanged, so that on most
systems (with only 16 bit domain) the output format is unchanged
and is 4 characters wide. For example: 0000:00:01.0
Only on sysetms with higher bits will the domain take up more
space; example: 12000:00:01.0
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Device name resides in two different locations, in rte_device->name and
in ethernet device private data.
For now, the copy in the ethernet device private data is required for
multi process support, the name is the how secondary process finds about
primary process device.
But for drivers there is no reason to use the copy in the ethernet
device private data.
This patch updates PMDs to use only rte_device->name.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Since SSE4 is now part of minimum requirements for DPDK on x86, we no
longer need this fallback code.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Since SSE4 is now part of the minimum requirements for DPDK, we no longer
need these checks.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Since SSE4 is now minimum requirement for x86 platforms we can replace the
check for SSE4 with a check for x86
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Replaced usage of %a0 in inline assembly with [%x0]
Signed-off-by: Ashwin Sekhar T K <ashwin.sekhar@caviumnetworks.com>
Reviewed-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
At some places, the log2() function is used despite this function
works on float. This introduces a dependency to the math lib but
most of the time it is not required because we want an integer log2.
Add a new helper to do this job and fix nfp driver.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Change the rte_eth_dev_callback_process function to return int,
and add a void *ret_param parameter.
The new parameter is used by ixgbe and i40e instead of abusing
the user data of the callback.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Socket id parsed from the user was checked
if it was in the range of available sockets.
This check is unnecessary, as the socket specified
might not have memory anyway, so it will fail
at memory allocation.
Therefore, the best solution is to remove this check.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Zero the whole memory zone instead of the first few bytes.
Fixes: c1f86306a0 ("virtio: add new driver")
Cc: stable@dpdk.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
This patch implements the ops rx_queue_count for vhost PMD by adding
a helper function rte_vhost_rx_queue_count in vhost lib.
The ops rx_queue_count gets vhost RX queue avail count and helps to
understand the queue fill level.
Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
Acked-by: Ciara Loftus <ciara.loftus@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Fixing typos across dpdk source code using codespell utility.
Skipped the ethdev driver's base code fixes to keep the base
code intact.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
