NetVSC netdevices which are already routed should not be probed because
they are used for management purposes by the HyperV.
The corrupted code got the routed devices from the system file
/proc/net/route and wrongly parsed only the odd lines, so devices which
their routes were in even lines, were considered as unrouted devices
and were probed.
Use linux netlink lib to detect the routed NetVSC devices instead of
file parsing.
Fixes: 31182fadfb21 ("net/vdev_netvsc: skip routed netvsc probing")
Cc: stable@dpdk.org
Suggested-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Matan Azrad <matan@mellanox.com>
In 18.02 release the ABI of ethdev component was changed.
To keep compatibility with previous versions of the library
the versioning of rte_eth_dev_filter_ctrl function was implemented.
As soon as deprecation note was issued in 18.02 release, there is
no need to keep compatibility with previous versions.
Remove the versioning of rte_eth_dev_filter_ctrl function.
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The current code compares two strings upto the length of 1st string
(searched name). If the 1st string is prefix of 2nd string (existing name),
the string comparison returns the port_id of earliest prefix matches.
This patch fixes the bug by using strcmp instead of strncmp.
Fixes: 9c5b8d8b9fe ("ethdev: clean port id retrieval when attaching")
Cc: stable@dpdk.org
Signed-off-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
In case osal_dma_alloc_coherent() or osal_dma_alloc_coherent_aligned() are
called from a management thread, core_id turn out to be LCORE_ID_ANY, and
the resulting socket for alloc will be socket 0.
This is not desirable when using a NIC from socket 1 which might very
likely be configured to use memory from that socket only.
In that case, allocation will fail.
To address this, use master lcore instead when called from mgmt thread.
The associated socket should have memory available.
Fixes: ec94dbc57362 ("qede: add base driver")
Cc: stable@dpdk.org
Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>
Acked-by: Harish Patil <harish.patil@cavium.com>
Acked-by: Harish Patil <harish.patil@cavium.com>
My english is far worse than those from the marketing team.
Fixes: 80bc1752f16e ("nfp: add guide")
Fixes: d625beafc8be ("doc: update NFP with PF support information")
Fixes: 80987c40fd28 ("config: enable nfp driver on Linux")
Cc: stable@dpdk.org
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
Mixing numeric macros with bit shifts macros is not a good idea.
Fixes: 011411586e03 ("net/nfp: extend speed capabilities advertised")
Cc: stable@dpdk.org
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
The barrier needs to be after reading the DD bit. It has not been
a problem because the potential reads which can not happen before
reading the DD bit seem to be far enough, so the compiler is not
rescheduling them. However, a refactoring could make this problem
to arise.
Fixes: b812daadad0d ("nfp: add Rx and Tx")
Cc: stable@dpdk.org
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Although this can be done by the app, because other PMDs are doing it,
apps expect this behaviour from the PMD.
Fixes: b812daadad0d ("nfp: add Rx and Tx")
Cc: stable@dpdk.org
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
primary_slave_port_id is uint16_t which needs to be correctly stored
with the same data type of input parameter in bond_ethdev_configure.
In powerpc, creating bond pmd results in below error due to wrong
cast on input param. This is reproducible, only when using shared
libraries.
sudo -E LD_LIBRARY_PATH=$PWD/$RTE_TARGET/lib $RTE_TARGET/app/testpmd \
-l 0,8 --socket-mem=1024,1024 \
--vdev 'net_tap0,iface=dpdktap0' --vdev 'net_tap1,iface=dpdktap1' \
--vdev 'net_bonding0,mode=1,slave=0,slave=1,primary=0,socket_id=1' \
-d $RTE_TARGET/lib/librte_pmd_tap.so \
-d $RTE_TARGET/lib/librte_mempool_ring.so -- --forward-mode=rxonly
Configuring Port 0 (socket 0)
PMD: net_tap0: 0x70a854070280: TX configured queues number: 1
PMD: net_tap0: 0x70a854070280: RX configured queues number: 1
Port 0: 86:EA:6D:52:3E:DB
Configuring Port 1 (socket 0)
PMD: net_tap1: 0x70a854074300: TX configured queues number: 1
PMD: net_tap1: 0x70a854074300: RX configured queues number: 1
Port 1: 42:9A:B8:49:B6:00
Configuring Port 2 (socket 1)
EAL: Failed to set primary slave port 7424 on bonded device net_bonding0
Fail to configure port 2
EAL: Error - exiting with code: 1
Cause: Start ports failed
Fixes: f8244c6399 ("ethdev: increase port id range")
Cc: stable@dpdk.org
Signed-off-by: Gowrishankar Muthukrishnan <gowrishankar.m@linux.vnet.ibm.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Regenerate MCDI and TLV layout headers from firmwaresrc to
pick up DPDK firmware variant and related Rx queue and filtering
extensions.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Set outer_ip_id in the TX option descriptor for encapsulated packets.
Signed-off-by: Vijay Srivastava <vijays@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Document the TX_EV_TYPE used for TX completion events corresponding
to CTPIO sends.
Signed-off-by: Andy Moreton <amoreton@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Either cut-through or store-and-forward mode.
Signed-off-by: Guido Barzini <gbarzini@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
New port mode names are defined for Medford2 and later, and
the existing names are aliased to them. Add comments with the
numeric port mode to clarify the external port modes table.
Signed-off-by: Andy Moreton <amoreton@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The event timer interface has changed for Medford2 - for
details see bug66418 comment 9. Update the common code to
use the new timer semantics for Medford2.
Signed-off-by: Andy Moreton <amoreton@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Medford2 controllers support control and reporting of
FEC modes for 25G and higher links. See SF-109306-TC
for suggested usage in client code.
Signed-off-by: Andy Moreton <amoreton@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
