These headers are used but not included explicitly, including them.
"arpa/inet.h" is included for 'htons' and friends.
"netinet/in.h" is included for 'IPPROTO_IP'.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Rasesh Mody <rmody@marvell.com>
Currently meter algorithms only supports bytes per second(BPS).
Check packet_mode set to TRUE are rejected.
Signed-off-by: Li Zhang <lizh@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Liron Himi <lironh@marvell.com>
Currently meter algorithms only supports bytes per second(BPS).
Check packet_mode set to TRUE are rejected.
Signed-off-by: Li Zhang <lizh@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
add meter profile packet_mode to the ethernet device.
One example:
add port meter profile rfc2697 (port_id) (profile_id)
(cir) (cbs) (ebs) (packet_mode)
Signed-off-by: Li Zhang <lizh@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Currently meter algorithms only supports rate is bytes per second (BPS).
Add packet_mode flag in meter profile parameters data structure.
So that it can meter traffic by packet per second.
When packet_mode is 0, the profile rates and bucket sizes are
specified in bytes per second and bytes
when packet_mode is not 0, the profile rates and bucket sizes are
specified in packets and packets per second.
The below structure will be extended:
rte_mtr_meter_profile
rte_mtr_capabilities
Signed-off-by: Li Zhang <lizh@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The hardware outer/inner VLAN protocol types are now updated to map to
new interface VLAN protocol types, so update the application to use new
VLAN protocol types when the rte_flow is QinQ filter type.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Adds a support for switch filter: GTP-U using just inner fields.
If user doesn't specify outer protocol and its fields but wants to
add switch filter for GTP-U using inner protocols and related fields
such as inner L3 and/or inner L4, this patch enables such filtering.
Signed-off-by: Kiran Patil <kiran.patil@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Add some new macros of PTYPE values to support PPPoL2TPv2oUDP.
Signed-off-by: Ting Xu <ting.xu@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
The dummy packet should be QinQ PPPoE ipv6 when ppp protocol is ipv6.
Fixes: bb3386f348 ("net/ice: enable QinQ filter for switch")
Cc: stable@dpdk.org
Signed-off-by: Yuying Zhang <yuying.zhang@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Since VLAN protocol type 'ICE_VLAN_OFOS' has been changed to map
the hardware VLAN protocol ID to 'ICE_VLAN_OF_HW (16)' when in Double
VLAN mode, and to 'ICE_VLAN_OL_HW (17)' when in Single VLAN mode.
So 'ICE_VLAN_OFOS' can't be used with 'ICE_VLAN_EX' which is outer VLAN
hardware protocol ID 'ICE_VLAN_OF_HW (16)' to do the QinQ VLAN pattern.
Introduce the new inner VLAN protocol type 'ICE_VLAN_IN', which is inner
VLAN hardware protocol ID 'ICE_VLAN_OL_HW (17)'.
Now for QinQ VLAN pattern, the protocol 'ICE_VLAN_EX' and 'ICE_VLAN_IN'
should be used to set the related protocol header fields like VLAN ID.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Add helper functions to set the GPIO pin state or get the value of a
GPIO signal that's the part of the topology based on AQ commands.
This change is needed to setup GPIO pins state for PTP, SyncE etc.
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Enable I2C read/write AQ commands. They are now required for
controlling the external physical connectors via external I2C
port expander on E810-T adapters.
Signed-off-by: Maciej Machnikowski <maciej.machnikowski@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Check priority when look for a recipe which matches our request
to enable flow priority for switch filter.
Signed-off-by: Yuying Zhang <yuying.zhang@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Protocol id for first vlan in Double VLAN Mode (DVM) should be
ICE_VLAN_OF_HW = 16, but for Single VLAN Mode (SVM) this should be
ICE_VLAN_OL_HW = 17.
Change protocol id in type to id translation array for outer vlan
to 17 when DVM is enabled, which means the driver, package,
and firmware support DVM.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com>
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Add support for PPPoL2TPv2oUDP RSS hash. L2TPv2 and PPP ptypes
and flow headers are added. Protocol id for PPP is added.
Signed-off-by: Ting Xu <ting.xu@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Set E823C device's MAC type as generic.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Remove the unused ptype entry, and use the gcc extension for
ranged initializers in arrays for Linux, and explicitly target
each table entry by index when initializing under Linux.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Adding a function ice_flow_rem_vsi_prof() to remove flow entries
associated to the SW VSI handle. Once complete, clear the vsi index from
the flow profile bitmap. This will ensure that a VSI once removed
can be re-added and the package block rules will be added again.
Signed-off-by: Vignesh Sridhar <vignesh.sridhar@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
1. There are a lots of function header mismatch its function name.
2. remove unnecessary header file include.
3. remove unnecessary macro.
4. remove unnecessary comment.
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Performance improvement: use a write combining store
instead of a regular mmio write to update queue tail
registers.
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Restrict the "remove l3_l4_xsum_errors from rx_errors" to 82599 only for
hardware errata.
Fixes: 256ff05a9c ("ixgbe: fix Rx errors statistics for UDP checksum")
Cc: stable@dpdk.org
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The mlx5 PMD allocated the resources of the sample actions, and then
moved these ones to the destination actions array. The original indices
were not cleared and the resources were referenced twice in the
flow object - as the fate actions and in the destination actions array.
This causes the failure on flow destroy because PMD tried to release the
same objects twice.
The patch clears the original indices, add the missed checking for zero
and eliminates multiple object releasing.
Fixes: 00c10c2211 ("net/mlx5: update translate function for mirroring")
Cc: stable@dpdk.org
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Reviewed-by: Suanming Mou <suanmingm@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
If RSS action contains non zero hash key length and NULL
key buffer pointer the default hash key should be used.
The check for the NULL pointer this was missing in the mlx4
PMD causing crash, for example, in testpmd with command:
flow validate 0 ingress group 0
pattern eth / ipv4 / end
actions rss queues 0 end key_len 40 / end
Fixes: ac8d22de23 ("ethdev: flatten RSS configuration in flow API")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Updates the documentation for push/pop VLAN support. In E-Switch
mode, push VLAN on ingress traffic and pop VLAN in egress traffic
are both support.
Signed-off-by: Dong Zhou <dongzhou@nvidia.com>
Reviewed-by: Asaf Penso <asafp@nvidia.com>
When RSS expand, if there is no expansion happened but completion
happened because user only input next protocol field instead of item
i.e, ether type == 0x8100 instead of VLAN, an extra flow is created with
missing item in order to filter traffic strictly.
However, after [1] and [2] the rte_flow_item_eth itself is enough to
filter out VLAN traffic, the VLAN item is not needed.
[1]: commit 09315fc838 ("ethdev: add VLAN attributes to ethernet and VLAN items")
[2]: commit 86b59a1af6 ("net/mlx5: support VLAN matching fields")
This redundant flow will cause failure in some scenarios on group 0 due
to they are the same FTE.
Fixes: fc2dd8dd49 ("ethdev: fix expand RSS flows")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyu Min <jackmin@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Extend the range of immediate value used in the MODIFY_FIELD action
from 32 to 64 bits to conform to the rte_flow_action_modify_data spec.
Apply appropriate big endian conversion to the immediate value
according to a destination field bit width.
Fixes: 641dbe4fb0 ("net/mlx5: support modify field flow action")
Cc: stable@dpdk.org
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Converting modify_field action masks to the big endian format is wrong
for small (less than 4 bytes) fields. Use the BE conversions appropriate
for a field size, not rte_cpu_to_be_32 for everything.
Fixes: 144127ba56 ("net/mlx5: adjust modify field action endianness")
Cc: stable@dpdk.org
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Mellanox hardware can only modify any packet field in 32-bit chunks,
which means 4 such chunks are needed to modify an IPv6 address.
The modification order of these chunks starts from the most significant
bits for the IPv6 address. That leads to confusing results when trying
to modify either source or destination address via the MODIFY_FIELD
action. Fix the order of 32-bit chunks for IPv6 addresses modification
by starting from the least significant bits.
Fixes: 641dbe4fb0 ("net/mlx5: support modify field flow action")
Cc: stable@dpdk.org
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
In Windows DevX returns the rate of the current link speed
in bit/s, this rate was converted to Mibit/s instead of the Mbit/s
rate expected by DPDK resulting in wrong link speed reporting.
Fixes: 6fbd73709e ("net/mlx5: support link update on Windows")
Cc: stable@dpdk.org
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
The MODIFY_FIELD action requires the extended metadata support
in order to manipulate on METADATA register as well as on MARK register.
Check if it is supported and reject the MODIFY_FIELD action if it is not
just like it was done before for the MARK register modifications.
Fixes: 0588d64ffd ("net/mlx5: check extended metadata for mark modification")
Cc: stable@dpdk.org
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
New FDIR parsing are added to handle the fragmented IPv4/IPv6 packet.
Signed-off-by: Ting Xu <ting.xu@intel.com>
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add new virtchnl protocol header type and fields for IP fragment packets
to support RSS hash and FDIR.
Signed-off-by: Ting Xu <ting.xu@intel.com>
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When removing the mac filter in ice_remove_all_mac_vlan_filters(),
TAILQ_FOREACH_SAFE should be used instead of TAILQ_FOREACH,
Otherwise, it will result in a illegal pointer access.
Fixes: e0dcf94a0d ("net/ice: support VLAN ops")
Cc: stable@dpdk.org
Signed-off-by: Wenwu Ma <wenwux.ma@intel.com>
Tested-by: Zhihong Peng <zhihongx.peng@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
According to E1000_ETH_OVERHEAD definition, max_rx_pkt_len contains
one VLAN tag size. Therefore when config RLPML register, if dual VLAN
not enabled there is no need to add VLAN tag size to max_rx_pkt_len,
otherwise only one another VLAN tag size should be added to.
Fixes: e51abef393 ("igb: fix max RX packet size and support dual VLAN")
Cc: stable@dpdk.org
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Tested-by: Lingli Chen <linglix.chen@intel.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
When create a rule with following invalid RSS type combinations,
it should fail.
Invalid RSS combinations list:
- ETH_RSS_IPV4 | ETH_RSS_NONFRAG_IPV4_TCP
- ETH_RSS_IPV6 | ETH_RSS_NONFRAG_IPV6_TCP
This patch adds these combinations in 'invalid_rss_comb' array to
do valid check, if the combination check failed, the rule will be
created failed.
Signed-off-by: Lingyu Liu <lingyu.liu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The completion queue index could be implicitly extended past its
uint16_t size when multiplied by the size of the descriptor. While
this should not be a problem, coverity flags it. Do the extension
explicitly by casting the index to uintptr_t.
Coverity issue: 161317
Fixes: 8b428cb5a9 ("net/enic: use 64B completion queue entries if available")
Cc: stable@dpdk.org
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Hyong Youb Kim <hyonkim@cisco.com>
The indication fields in the MCDI response are individual
bits, but the current code mistakenly compares the larger
dword with 1. This breaks encap. type discovery. Fix that.
Fixes: 891408c45a ("common/sfc_efx/base: indicate MAE support for encapsulation")
Cc: stable@dpdk.org
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Currently, after the reset is complete, the PMD restores the FEC
according to the FEC configuration reserved in the driver. If there is a
concurrency between the FEC setup operation and the restore operation
after a reset, the FEC status of the last hardware may be unknown.
This patch adds the step of obtaining the lock when setting the FEC to
avoid concurrency between restore operation and setting operation.
Fixes: 9bf2ea8dbc ("net/hns3: support FEC")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
At the end of the reset, the state of queues need to be restored
according to the states saved in the driver. If the start and stop
operations of the queues are concurrent at this time, it may cause the
final status to be uncertain.
This patch requires queues to acquire the hw lock before starting and
stopping. If the device is being restored due to reset at this time, it
will block until the reset is completed.
Fixes: fa29fe45a7 ("net/hns3: support queue start and stop")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
During the task queue pairs reset, the getimeofday is used to obtain the
timestamp to determine whether the command execution times out. But
gettimeofday is not monotonous, it can be modified by system
administrators, so the timing may not be accurate or even cause the loop
to wait consistently.
And actually, in this scenario, it is not necessary to obtain the
timestamp.
This patch removes the operation of obtaining the timestamp from the task
queue pairs reset function.
Fixes: bba6366983 ("net/hns3: support Rx/Tx and related operations")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Currently, the packet type calculated by
vlan/ovlan/l3id/l4id/ol3id/ol4id fields have the following problems:
1) Identify error when exist VLAN strip which will lead to the data
buffer has non VLAN header but mbuf's ptype have L2_ETHER_VLAN flag.
2) Some packet identifies error, eg: hardware report it's RARP or
unknown packet, but ptype will marked with L2_ETHER .
So driver will calculate packet type only by l3id/l4id/ol3id/ol4id
fields.
Fixes: 0e98d5e6d9 ("net/hns3: fix packet type report in Rx")
Fixes: bba6366983 ("net/hns3: support Rx/Tx and related operations")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Currently, if RAS interrupt and FLR occurred at the same time, FLR will
be detected and corresponding schedule state will be set during RAS
interrupt processing. However, the schedule state value will be
overridden in subsequent RAS processing, resulting in FLR processing
failure. This patch solves this problem.
Fixes: 2790c64647 ("net/hns3: support device reset")
Cc: stable@dpdk.org
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
This patch adds rollback processing when updating imissed
stats failed in PF init.
Fixes: 3e9f3042d7 ("net/hns3: add imissed packet stats")
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Currently, there are four control variables (rx_simple_allowed,
rx_vec_allowed, tx_simple_allowed and tx_vec_allowed) which are used
to impact the selection of Rx/Tx burst function.
The purpose of the design is to provide a way to control the selection
of Rx/Tx burst function by modifying it's values, but these variables
have no entry to modify unless make intrusive modifications.
Now we already support runtime config to select Rx/Tx function, these
variables could be removed.
Fixes: a124f9e959 ("net/hns3: add runtime config to select IO burst function")
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
This patch adds debug info for Rx/Tx burst function which was choosing.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Currently, PF driver will report lsc when it detects the link status
change, it's not a generic implementation.
We refactor PF lsc event report by following scheme:
1. PF driver marks RTE_PCI_DRV_INTR_LSC in rte_pci_driver by default.
2. In the init stage, PF driver will detect whether firmware supports
lsc interrupt or not, driver will clear RTE_ETH_DEV_INTR_LSC flag if
firmware doesn't support lsc interrupt.
3. PF driver will report lsc event only when dev_conf.intr_conf.lsc is
set.
Note: If the firmware supports lsc interrupt, we also keep periodic
polling to deal with the interrupt loss.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Currently, VF driver periodically obtains link status from PF kernel
driver, and reports lsc event when detects link status change. Because
the period is 1 second, it's probably too late to report especially
in such as bonding scenario.
To solve this problem we use the following scheme:
1. PF kernel driver support immediate push link status to all VFs when
it detects the link status changes.
2. VF driver will detect PF kernel driver whether support push link
status in device init stage by sending request link info mailbox
message to PF, PF then tell VF the push capability by extend
HNS3_MBX_LINK_STAT_CHANGE mailbox message.
3. VF driver marks RTE_PCI_DRV_INTR_LSC in rte_pci_driver by default,
when it detects PF doesn't support push link status then it will clear
RTE_ETH_DEV_INTR_LSC flag.
So if PF kernel driver supports push link status to VF, then VF driver
will have RTE_ETH_DEV_INTR_LSC capability.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Initialize TCP data offset field with TCP header length, this
field is used to derive L4 header length and by hardware to
validate a TCP header.
Fixes: 41f72ec940 ("test: add packet burst generator functions")
Cc: stable@dpdk.org
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
