These changes were planned for 17.11 but were proposed too late.
Postpone those to v18.02 instead.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
This commit adds a section to the docs listing the mempool
device PMDs available.
It then adds the octeontx fpavf mempool PMD to the listed mempool
devices.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This commit adds a section to the docs listing the platform
guide for the PMDs.
It then adds the octeontx platform guide to the listed platform
devices.
Patch also removes platform specific duplicate setup information from
eventdev/octeontx.rst, nics/octeontx.rst and update to
plaform/octeontx.rst.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This updates mlx4 documentation and DPDK release notes
to reflect the PMD support for rdma-core from linux-rdma.
- PMD is now freed from Mellanox OFED and now only depends on the
public rdma-core package (v15 and above) instead.
(see https://github.com/linux-rdma/rdma-core/releases)
This PMD should run under Linux v4.14 and above.
- In case any of the above requirements can't be satisfied,
Mellanox OFED v4.2 and above also provide an updated rdma-core
as well back-ported kernel modules for most Linux distributions
and previous Linux versions.
(see http://www.mellanox.com/page/products_dyn?product_family=26).
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This commit removes the stale MLX4_INLINE_RECV_SIZE environment
variable from the documentation.
Fixes: 056eaf2e6d ("net/mlx4: drop inline receive support")
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The feature was added at the end of the table.
And the description was between the anchor _nic_features_timesync
and its title.
It is moved near related features with a new anchor.
It is also renamed from "mbuf fast free" to "fast mbuf free".
Fixes: d6f90afd30 ("ethdev: add mbuf fast free Tx offload")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The net PMD overview table is big and required to be shrunk.
The crypto PMD tables had variable column sizes: the latest
columns were smaller.
The minimum width is set to 0.9em without any forced padding.
The maximum width is set to 2em.
The width of the first column set by sphinx is overridden to 0
for full elasticity.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: John McNamara <john.mcnamara@intel.com>
Since the release notes has a new section for removed items,
the dom0 removal notice can be moved there.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
A new library of the IPsec Multi-buffer library has been
released (0.47), which is used by the AESNI GCM PMD.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch fixes a trivial typo in DPDK programmer's guide:
it should be rte_cpu_get_features() instead of rte_cpu_get_feature().
Signed-off-by: Rami Rosen <rami.rosen@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This is a wrapper to Linux kernel get_maintainer.pl file and only
supports parsing MAINTAINERS file (no git fallback etc..)
Requires DPDK_GETMAINTAINER_PATH devel config option set, please check
devtools/load-devel-config.
DPDK_GETMAINTAINER_PATH should be full path to the get_maintainer.pl
script, like:
DPDK_GETMAINTAINER_PATH=~/linux/scripts/get_maintainer.pl
Can be used individually:
./devtools/get-maintainer.sh <my.patch>
Or via git send-email, to add maintainers automatically:
git send-email --to-cmd ./devtools/get-maintainer.sh \
--cc dev@dpdk.org HEAD -4
Currently there is an ugly workaround to be able to use Linux script out
of the kernel tree, later better method can replace it.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
The Mellanox drivers were requiring MOFED at compilation time.
It is now possible to use the upstream rdma-core package.
So the dependency option is renamed in the build tool.
Fixes: 43e9d9794c ("net/mlx5: support upstream rdma-core")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Add programmer's guide doc to explain the use of the
Event Ethernet Rx Adapter library.
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The Flow Classify Library Programmers Guide documents
librte_flow_classify.
The Flow Classify Sample Application Guide documents the
flow_classify sample application which is used to
demonstrate the use of the Flow Classify Library,
librte_flow_classify.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
As the rte_flow is a new complex module in the DPDK.
In order to ease developers in to using this feature
it was suggested to supply a simple howto doc.
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This application shows a simple usage of the
rte_flow API for hardware filtering offloading.
In this demo we are filtering specific IP to
specific target queue, while sending all the
rest of the packets to other queue.
Signed-off-by: Ori Kam <orika@mellanox.com>
Move the vdev bus from lib/librte_eal to drivers/bus.
As the crypto vdev helper function refers to data structure
in rte_vdev.h, so we move those helper function into drivers/bus
too.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Remove rte_cryptodev_create_vdev() for duplication.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Introduce a new iommu-support parameter to Vhost PMD that
passes the RTE_VHOST_USER_IOMMU_SUPPORT flag at vhost
device register time.
Default value is 0, meaning that IOMMU support is disabled
if not specified explicitly.
Example to enable IOMMU support for a given device:
--vdev 'net_vhost0,iface=/tmp/vhost-user2,iommu-support=1'
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
Tested-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Acked-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Qemu versions from v2.7.0 to v2.9.0 have their reply-ack protocol
feature implementation broken with multiqueue. The reply-ack
protocol feature is optional except for IOMMU feature.
This patch introduce a new RTE_VHOST_USER_IOMMU_SUPPORT flag to
enable VIRTIO_F_IOMMU_PLATFORM virtio feature.
By default, the IOMMU support is now disabled.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
Tested-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Acked-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
The description of i40e 16 byte descriptor is not clear
enough. Add more details.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Fix a strange behavior from the NIC, when the flow starts with a VXLAN
layer with a VNI equals to zero all the traffic will match within this
rule.
Fixes: 2e709b6aa0 ("net/mlx5: support VXLAN flow item")
Cc: stable@dpdk.org
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
API and ABI of mempool library has been changed in 17.11.
Fixes: 02604520b2 ("mempool: remove unused flags argument")
Fixes: 0cc0f8aaa3 ("mempool: change flags from int to unsigned int")
Fixes: 6eac187bff ("mempool: add flags arg in xmem size and usage")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
The wording changes have been done in the API without breaking
the ABI. The deprecated fields and symbols can be removed later
when an another ABI change will be required.
The deprecation notice can be removed.
The release notes describe the new available API with IOVA wording.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Renamed data type from phys_addr_t to rte_iova_t.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Rename buf_physaddr to buf_iova.
Keep the deprecated name in an anonymous union to avoid breaking
the API.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Add new Introduction Section into the sample app guides.
Signed-off-by: Marko Kovacevic <marko.kovacevic@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Moved duplicated, and occasionally outdated, doc sections from each
of the sample app guides chapters to a common chapter at the start.
This reduces the duplication in the docs and provides a single
point of reference for compiling the sample apps.
Signed-off-by: Herakliusz Lipiec <herakliusz.lipiec@intel.com>
Signed-off-by: Marko Kovacevic <marko.kovacevic@intel.com>
Update software event device documentation to include use of service
cores for event distribution.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Update the guide with event queue configuration and event enqueue
operation.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
The PCI lib defines the types and methods allowing to use PCI elements.
The PCI bus implements a bus driver for PCI devices by constructing
rte_bus elements using the PCI lib.
Move the relevant code out of the EAL to its expected place.
Libraries, drivers, unit tests and applications are updated to use the
new rte_bus_pci.h header when necessary.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Do not expose the minute implementations of PCI parsing.
This leaves only the all-purpose rte_pci_addr_parse, which is simpler to
use.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Some devices may not support or fail setting VLAN offload
configuration based on dynamic circumstances so the
vlan_offload_set_t vector is modified to return an int so
the caller can determine success or not.
rte_eth_dev_set_vlan_offload is updated to return the
value provided by the vector when called along with restoring
the original offload configs on failure.
Existing vlan_offload_set_t vectors are modified to return
an int. Majority of cases return 0 but a few that actually
can fail now return their failure codes.
Finally, a vlan_offload_set_t vector is added to virtio
to facilitate dynamically turning VLAN strip on or off.
Signed-off-by: David Harton <dharton@cisco.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Configuring UAR as IO-mapped makes maximum throughput decline by
noticeable amount. If UAR is configured as write-combining register,
a write memory barrier is needed on ringing a doorbell.
rte_wmb() is mostly effective when the size of a burst is comparatively
small. Revert the register back to write-combining and enforce a write
memory barrier instead, except for vectorized Tx burst routines.
Application can change it by setting MLX5_SHUT_UP_BF under its own
necessity.
Fixes: 9f9bebae55 ("net/mlx5: don't map doorbell register to write combining")
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
PKT_RX_VLAN_PKT and PKT_RX_QINQ_PKT are deprecated for a while.
As explained in [1], these flags were kept to let the applications and
PMDs move to the new flag. There is also a need to support Rx vlan
offload without vlan strip (at least for the ixgbe driver).
This patch renames the old flags for this feature, knowing that some
PMDs were using PKT_RX_VLAN_PKT and PKT_RX_QINQ_PKT to indicate that
the vlan tci has been saved in the mbuf structure.
It is likely that some PMDs do not set the proper flags when doing vlan
offload, and it would be worth making a pass on all of them.
Link: [1] http://dpdk.org/ml/archives/dev/2017-June/067712.html
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This flag is not necessary at the ether layer anymore.
Buses are able to advertise their hotplug support. The ether layer can
rely upon this capability instead of a special flag.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
When using "show port xstats all" command to show xstats, the output
is usually too long to obtain what you really want, especially when
multi-queue is enabled.
Added an option to set whether zero values should be displayed
or not for xstats. The "set xstats-hide-zero on|off" command enables
the user to decide if the zero values should be shown while
displaying xstats.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Signed-off-by: Elza Mathew <elza.mathew@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Document how DPDK app should handle the event of switch quit-restart
to resume its network without an app-level restart.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Add Marvell International Ltd. to the copyright holders.
Fixes: 0ddc9b815b ("net/mrvl: add net PMD skeleton")
Fixes: 1a286a1139 ("doc: add mrvl NIC guide")
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Ipsec-secgw application is modified so that it can support
following type of actions for crypto operations
1. full protocol offload using crypto devices.
2. inline ipsec using ethernet devices to perform crypto operations
3. full protocol offload using ethernet devices.
4. non protocol offload
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
The crypto action is specified by an application to request
crypto offload for a flow.
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
Reviewed-by: John McNamara <john.mcnamara@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Removes any dependency of librte_cryptodev on the PCI device
infrastructure code and removes the functions which were virtual
device specific.
Updates QAT crypto PMD to remove dependencies on rte_cryptodev_pci.h
and replaces those calls with the new bus independent functions.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Removes any dependency of librte_cryptodev on the virtual device
infrastructure code and removes the functions which were virtual
device specific.
Updates all virtual PMDs to remove dependencies on rte_cryptodev_vdev.h
and replaces those calls with the new bus independent functions.
Due to these changes, the cryptodev ABI version gets bumped.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Tested-by: Tomasz Duszynski <tdu@semihalf.com>
Adds new PMD assist functions which are bus independent for driver to
create and destroy new device instances.
Also includes function to parse parameters which can be passed to
driver on device initialisation.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Add Rx adapter queue add and delete API for both generic eth_devices as
well as HW backed eth_octeontx which supports direct event injection to
event device.
The HW injected event needs to be converted into mbuf, previously this
was done in eth_octeontx during rx_burst now it is moved to
event_octeontx as events from Rx adapter are dequeued directly from
event device.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Reviewed-by: Nikhil Rao <nikhil.rao@intel.com>
This commit adds a new sample app, which showcases the value
of running services. In particular it allows the application
to dynamically schedule services to service-cores.
The sample app itself registers a number of dummy services,
and applies different profiles to them at runtime. Note that
this sample application does not forward any traffic - it
demonstrates advanced usage of the service cores API.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Gage Eads <gage.eads@intel.com>
The following APIs's are implemented in the
librte_flow_classify library:
rte_flow_classifier_create
rte_flow_classifier_free
rte_flow_classifier_query
rte_flow_classify_table_create
rte_flow_classify_table_entry_add
rte_flow_classify_table_entry_delete
The following librte_table API's are used:
f_create to create a table.
f_add to add a rule to the table.
f_del to delete a rule from the table.
f_free to free a table
f_lookup to match packets with the rules.
The library supports counting of IPv4 five tupple packets only,
ie IPv4 UDP, TCP and SCTP packets.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Jasvinder Singh <jasvinder.singh@intel.com>
Virtio PMD already has supported link status change(lsc), but VM which
must be created by qemu 2.7.0 and above can support it when vhost
user disconnects, since the capability to detect vhost user disconnection
is introduced in qemu 2.7.0. The patch updates doc to let user know that.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
Remove rte_set_log_level(), rte_get_log_level(),
rte_set_log_type(), and rte_get_log_type().
Also update librte_eal.so version in docuementation.
The LIBABIVER variable in eal has already been modified in
commit f26ab687a7 ("eal: remove Xen dom0 support").
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
The libraries which have their ABI version increased in this release
must be prepended with a + sign to make them appear clearly.
Fixes: f8244c6399 ("ethdev: increase port id range")
Fixes: ec51443cc9 ("gso: add Generic Segmentation Offload API framework")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Zhiyong Yang <zhiyong.yang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add new section in the Programmer Guide for the ethdev traffic metering
and policing (MTR) API.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Metering and policing action typically sits on top of flow classification,
which is why MTR objects are enabled through a newly introduced flow
action.
The configuration of MTR objects is done in their own namespace (rte_mtr)
within the librte_ether library. The MTR object is hooked into ethdev RX
processing path using the "meter" flow action.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The features described for scalar fm10k and its vector implementations
are the same.
No need to distinguish them in features description.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: John McNamara <john.mcnamara@intel.com>
Following agreement at the DPDK Technical Board meeting [1], the policy
that hardware support deprecation should be treated as though it were an
ABI break needs to be documented in the contributors guide.
[1] http://dpdk.org/ml/archives/dev/2017-September/074613.html
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Since port id has changed from uint8_t to uint16_t in dpdk code,
So update the change in related doc.
Fixes: f8244c6399 ("ethdev: increase port id range")
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This patch adds hardware offloading support for IPV4, UDP and TCP checksum
verification, including inner/outer checksums on supported tunnel types.
It also restores packet type recognition support.
Signed-off-by: Vasily Philipov <vasilyf@mellanox.com>
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This patch adds hardware offloading support for IPv4, UDP and TCP checksum
calculation, including inner/outer checksums on supported tunnel types.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This patch adds support for accessing the hardware directly when
handling Rx packets eliminating the need to use Verbs in the Rx data
path.
Rx scatter support: calculate the number of scatters on the fly
according to the maximum expected packet size.
Signed-off-by: Vasily Philipov <vasilyf@mellanox.com>
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This patch dissociates single-queue indirection tables and hash QP objects
from Rx queue structures to relinquish their control to users through the
RSS flow rule action, while simultaneously allowing multiple queues to be
associated with RSS contexts.
Flow rules share identical RSS contexts (hashed fields, hash key, target
queues) to save on memory and other resources. The trade-off is some added
complexity due to reference counters management on RSS contexts.
The QUEUE action is re-implemented on top of an automatically-generated
single-queue RSS context.
The following hardware limitations apply to RSS contexts:
- The number of queues in a group must be a power of two.
- Queue indices must be consecutive, for instance the [0 1 2 3] set is
allowed, however [3 2 1 0], [0 2 1 3] and [0 0 1 1 2 3 3 3] are not.
- The first queue of a group must be aligned to a multiple of the context
size, e.g. if queues [0 1 2 3 4] are defined globally, allowed group
combinations are [0 1] and [2 3]; groups [1 2] and [3 4] are not
supported.
- RSS hash key, while configurable per context, must be exactly 40 bytes
long.
- The only supported hash algorithm is Toeplitz.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Implement promiscuous and all multicast through internal flow rules
automatically generated according to the configured mode.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Give users the ability to create flow rules that match all multicast
traffic. Like promiscuous flow rules, they come with restrictions such as
not allowing additional matching criteria.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
This commit brings back VLAN filter configuration support without any
artificial limitation on the number of simultaneous VLANs that can be
configured (previously 127).
Also thanks to the fact it does not rely on fixed per-queue arrays for
potential Verbs flow handle storage anymore, this version wastes a lot less
memory (previously 128 * 127 * pointer size, i.e. 130 kiB per Rx queue,
only one of which actually had any use for this room: the RSS parent
queue).
The number of internal flow rules generated still depends on the number of
configured MAC addresses times that of configured VLAN filters though.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
This commit brings back support for configuring up to 128 MAC addresses on
a port through internal flow rules automatically generated on demand.
Unlike its previous incarnation, the necessary extra flow rule for
broadcast traffic does not consume an entry from the MAC array anymore.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
rte_flow_error_set() is a convenient helper to initialize error objects.
Since there is no fundamental reason to prevent applications from using it,
expose it through the public interface after modifying its return value
from positive to negative. This is done for consistency with the rest of
the public interface.
Documentation is updated accordingly.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Correct two minor issues in the GSO programmer's guide:
- a note is rendered incorrectly in the middle of an unordered list;
this results in the remainder of the list appearing inside the note.
Correct indentation of the note to resolve same.
- two minor visual artifacts are present in the 'three-part-output-segment'
diagram. Remove same.
Fixes: f6010c7655 ("doc: add GSO programmer's guide")
Signed-off-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Add support to AES-CCM, for 128, 192 and 256-bit keys.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Instead of parsing number of segments, from the command line,
parse segment size, as it is a more usual case to have
the segment size fixed and then different packet sizes
will require different number of segments.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The Multi-buffer library now supports DES-CBC
and DES-DOCSISBPI algorithms, so this commit
extends adds support for them in the PMD.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Reviewed-by: Radu Nicolau <radu.nicolau@intel.com>
IPSec Multi-buffer library v0.47 has been released,
which includes, among other features, support for DES-CBC
and DES-DOCSIS.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Since the crypto perf application is flexible enough
to cover all the crypto performance tests, these are not needed
anymore, so they will be removed to avoid duplications.
Besides, the crypto perf application gives the user more options
to get performance, for every single supported algorithm,
such as varying the buffer size as the user wants.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch adds a new benchmarking mode, which is intended for
microbenchmarking individual parts of the cryptodev framework,
specifically crypto ops alloc-build-free, cryptodev PMD enqueue
and cryptodev PMD dequeue.
It works by first benchmarking crypto operation alloc-build-free
loop (no enqueues/dequeues happening), and then benchmarking
enqueue and dequeue separately, by first completely filling up the
TX queue, and then completely draining the RX queue.
Results are shown as cycle counts per alloc/build/free, PMD enqueue
and PMD dequeue.
One new test mode is added: "pmd-cyclecount"
(called with --ptest=pmd-cyclecount)
New command-line argument is also added:
--pmd-cyclecount-delay-ms: this is a pmd-cyclecount-specific parameter
that controls the delay between enqueue and dequeue. This is
useful for benchmarking hardware acceleration, as hardware may
not be able to keep up with enqueued packets. This parameter
can be increased if there are large amounts of dequeue
retries.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This parameter makes number of cryptodev descriptors adjustable
and defaults to earlier hardcoded default of 2048.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Don't write CSR tail until we processed enough TX descriptors.
To avoid crypto operations sitting in the TX ring indefinitely,
the "force write" threshold is used:
- on TX, no tail write coalescing will occur if number of inflights
is below force write threshold
- on RX, check if we have a number of crypto ops enqueued that is
below force write threshold that are not yet submitted to
processing.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Don't write CSR head until we processed enough RX descriptors.
Also delay marking them as free until we are writing CSR head.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Replacing atomics in the QAT driver with simple 16-bit integers for
number of inflight packets.
This adds a new limitation to the QAT driver: each queue pair is
now explicitly single-threaded.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
When register a crypto driver, a cryptodev driver
structure was being allocated, using malloc.
Since this call may fail, it is safer to allocate
this memory statically in each PMD, so driver registration
will never fail.
Coverity issue: 158645
Fixes: 7a364faef1 ("cryptodev: remove crypto device type enumeration")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Reviewed-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
This patch add a API configuration of queue region in rss.
It can parse the parameters of region index, queue number,
queue start index, user priority, traffic classes and so on.
According to commands from command line, it will call i40e
private API and start the process of set or flush queue region
configure. As this feature is specific for i40e, so private API
will be used. Aslo add a document for these new commands.
Queue region only support PF by now, so this document is
only for configuration of queue region on PF port.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
The stats_get dev op API doesn't include return value, so PMD cannot
return an error in case of failure at stats getting process time.
Since PCI devices can be removed and there is a time between the
physical removal to the RMV interrupt, the user may get invalid stats
without any indication.
This patch changes the stats_get API return value to be int instead of
void.
All the net PMDs stats_get dev ops are adjusted by this patch.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add a new offload capability flag for Rx HW
timestamp and enabling/disabling this via rte_eth_rxmode.
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Reviewed-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
This commit extends the testpmd application with new forwarding engine
that demonstrates the use of ethdev traffic management APIs and softnic
PMD for QoS traffic management.
In this mode, 5-level hierarchical tree of the QoS scheduler is built
with the help of ethdev TM APIs such as shaper profile add/delete,
shared shaper add/update, node add/delete, hierarchy commit, etc.
The hierarchical tree has following nodes; root node(x1, level 0),
subport node(x1, level 1), pipe node(x4096, level 2),
tc node(x16348, level 3), queue node(x65536, level 4).
During runtime, each received packet is first classified by mapping the
packet fields information to 5-tuples (HQoS subport, pipe, traffic class,
queue within traffic class, and color) and storing it in the packet mbuf
sched field. After classification, each packet is sent to softnic port
which prioritizes the transmission of the received packets, and
accordingly sends them on to the output interface.
To enable traffic management mode, following testpmd command is used;
$ ./testpmd -c c -n 4 --vdev
'net_softnic0,hard_name=0000:06:00.1,soft_tm=on' -- -i
--forward-mode=tm
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Some devices do not support reset of eth stats. An application may
need to know not to clear shadow stats if the device cannot.
rte_eth_stats_reset is updated to provide a return code to share
whether the device supports reset or not.
Signed-off-by: David Harton <dharton@cisco.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Allow sufficient space for UUID in string form (36+1).
Needed to use UUID with Hyper-V.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add support for both per queue and overall basic statistics.
Signed-off-by: Jacek Siuda <jck@semihalf.com>
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Add support for crc offload and l3/l4 checksum offloads.
Signed-off-by: Jacek Siuda <jck@semihalf.com>
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Return supported link speed capabilities via rte_dev_info_get().
Signed-off-by: Jacek Siuda <jck@semihalf.com>
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Add support for retrieving physical link information i.e:
speed, duplex and link status.
Signed-off-by: Jacek Siuda <jck@semihalf.com>
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Add mrvl net pmd driver skeleton providing base for the further
development. Besides the basic functionality QoS configuration is
introduced as well.
Signed-off-by: Jacek Siuda <jck@semihalf.com>
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Support same functionalities as in
commit cf521eaa3c76 ("net/mlx5: remove flow director support")
This implementation is done on top of the generic flow API.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Generic flow API should be use for flow steering as is provides a better
and easier way to configure flows.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Mark packet type parsing in features.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Mark "Queue start/stop" as P as its been implemented only for tx queue.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Implement "mac_addr_set" op and mark "Unicast MAC filter" feature as "P"
as "mac_addr_add" and "mac_addr_remove" are not implemented.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Mark Basic stats support in features.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Mark Promiscuous mode in features.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Mark Link status in features.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
mark Jumbo frame, CRC offload support in features.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Add programmer's guide doc to explain the design and use of the
GSO library.
Signed-off-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch adds GSO support to the csum forwarding engine. Oversized
packets transmitted over a GSO-enabled port will undergo segmentation
(with the exception of packet-types unsupported by the GSO library).
GSO support is disabled by default.
GSO support may be toggled on a per-port basis, using the command:
"set port <port_id> gso on|off"
The maximum packet length (including the packet header and payload) for
GSO segments may be set with the command:
"set gso segsz <length>"
Show GSO configuration for a given port with the command:
"show port <port_id> gso"
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Signed-off-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch adds GSO support for GRE-tunneled packets. Supported GRE
packets must contain an outer IPv4 header, and inner TCP/IPv4 headers.
They may also contain a single VLAN tag. GRE GSO doesn't check if all
input packets have correct checksums and doesn't update checksums for
output packets. Additionally, it doesn't process IP fragmented packets.
As with VxLAN GSO, GRE GSO uses a two-segment MBUF to organize each
output packet, which requires multi-segment mbuf support in the TX
functions of the NIC driver. Also, if a packet is GSOed, GRE GSO reduces
its MBUF refcnt by 1. As a result, when all of its GSOed segments are
freed, the packet is freed automatically.
Signed-off-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch adds a framework that allows GSO on tunneled packets.
Furthermore, it leverages that framework to provide GSO support for
VxLAN-encapsulated packets.
Supported VxLAN packets must have an outer IPv4 header (prepended by an
optional VLAN tag), and contain an inner TCP/IPv4 packet (with an optional
inner VLAN tag).
VxLAN GSO doesn't check if input packets have correct checksums and
doesn't update checksums for output packets. Additionally, it doesn't
process IP fragmented packets.
As with TCP/IPv4 GSO, VxLAN GSO uses a two-segment MBUF to organize each
output packet, which mandates support for multi-segment mbufs in the TX
functions of the NIC driver. Also, if a packet is GSOed, VxLAN GSO
reduces its MBUF refcnt by 1. As a result, when all of its GSO'd segments
are freed, the packet is freed automatically.
Signed-off-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch adds GSO support for TCP/IPv4 packets. Supported packets
may include a single VLAN tag. TCP/IPv4 GSO doesn't check if input
packets have correct checksums, and doesn't update checksums for
output packets (the responsibility for this lies with the application).
Additionally, TCP/IPv4 GSO doesn't process IP fragmented packets.
TCP/IPv4 GSO uses two chained MBUFs, one direct MBUF and one indrect
MBUF, to organize an output packet. Note that we refer to these two
chained MBUFs as a two-segment MBUF. The direct MBUF stores the packet
header, while the indirect mbuf simply points to a location within the
original packet's payload. Consequently, use of the GSO library requires
multi-segment MBUF support in the TX functions of the NIC driver.
If a packet is GSO'd, TCP/IPv4 GSO reduces its MBUF refcnt by 1. As a
result, when all of its GSOed segments are freed, the packet is freed
automatically.
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Signed-off-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Lei Yao <lei.a.yao@intel.com>
Generic Segmentation Offload (GSO) is a SW technique to split large
packets into small ones. Akin to TSO, GSO enables applications to
operate on large packets, thus reducing per-packet processing overhead.
To enable more flexibility to applications, DPDK GSO is implemented
as a standalone library. Applications explicitly use the GSO library
to segment packets. To segment a packet requires two steps. The first
is to set proper flags to mbuf->ol_flags, where the flags are the same
as that of TSO. The second is to call the segmentation API,
rte_gso_segment(). This patch introduces the GSO API framework to DPDK.
rte_gso_segment() splits an input packet into small ones in each
invocation. The GSO library refers to these small packets generated
by rte_gso_segment() as GSO segments. Each of the newly-created GSO
segments is organized as a two-segment MBUF, where the first segment is a
standard MBUF, which stores a copy of packet header, and the second is an
indirect MBUF which points to a section of data in the input packet.
rte_gso_segment() reduces the refcnt of the input packet by 1. Therefore,
when all GSO segments are freed, the input packet is freed automatically.
Additionally, since each GSO segment has multiple MBUFs (i.e. 2 MBUFs),
the driver of the interface which the GSO segments are sent to should
support to transmit multi-segment packets.
The GSO framework clears the PKT_TX_TCP_SEG flag for both the input
packet, and all produced GSO segments in the event of success, since
segmentation in hardware is no longer required at that point.
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Signed-off-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The GRO library provides two modes to reassemble packets. Currently, the
csum forwarding engine has supported to use the lightweight mode to
reassemble TCP/IPv4 packets. This patch introduces the heavyweight mode
for TCP/IPv4 GRO in the csum forwarding engine.
With the command "set port <port_id> gro on|off", users can enable
TCP/IPv4 GRO for a given port. With the command "set gro flush <cycles>",
users can determine when the GROed TCP/IPv4 packets are flushed from
reassembly tables. With the command "show port <port_id> gro", users can
display GRO configuration.
The GRO library doesn't re-calculate checksums for merged packets. If
users want the merged packets to have correct IP and TCP checksums,
please select HW IP checksum calculation and HW TCP checksum calculation
for the port which the merged packets are transmitted to.
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Lei Yao <lei.a.yao@intel.com>
Add operations that are safe for secondary processes:
* (x)stats
* device info get
* rx/tx descriptor status
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
This commit bumps the library version to refect the ABI change
caused by removing the individual rte_event_port_count, queue_count,
and other get functions. These functions are superseded by the
get-attribute style API, which allows fetching values without API/ABI
changes.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Added new callbacks to notify about socket connection status.
As destroy_device is used for virtqueue processing *pause* as well as
connection close, the user has no distinction between those.
Consider the following scenario:
rte_vhost: received SET_VRING_BASE message,
calling destroy_device() as usual
user: end-user asks to remove the device (together with socket file),
OK, device is not *in use* - that's NOT the behavior we want
calling rte_vhost_driver_unregister() etc.
Instead of changing new_device/destroy_device callbacks and breaking
the ABI, a set of new functions new_connection/destroy_connection
has been added.
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jens Freimann <jfreimann@redhat.com>
As described in API documentation, the field hw_ip_checksum
requests both L3 and L4 offload.
Fixes: dad1ec72a3 ("doc: document NIC features")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
When I was adding mlockall() to the testpmd application it was
suggested to add a reference to the use case of mlockall(). This patch
adds is.
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
We remove xen-specific code in EAL, including the option --xen-dom0,
memory initialization code, compiling dependency, etc.
Related documents are removed or updated, and bump the eal library
version.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Previously, to get MFN address in dom0, this API is a wrapper to
obtain the "physical address".
As we will removed xen dom0 support, this API is not necessary.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This patch adds the documentation for membership library.
Signed-off-by: Yipeng Wang <yipeng1.wang@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
DPDK has support for both sw and hw mempool and
currently user is limited to use ring_mp_mc pool.
In case user want to use other pool handle,
need to update config RTE_MEMPOOL_OPS_DEFAULT, then
build and run with desired pool handle.
Introducing eal option to override default pool handle.
Now user can override the RTE_MEMPOOL_OPS_DEFAULT by passing
pool handle to eal `--mbuf-pool-ops-name=""`.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Extend port_id definition from uint8_t to uint16_t in lib and drivers
data structures, specifically rte_eth_dev_data. Modify the APIs,
drivers and app using port_id at the same time.
Fix some checkpatch issues from the original code and remove some
unnecessary cast operations.
release_17_11 and deprecation docs have been updated in this patch.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add new commands to manipulate with dynamic flow type to
pctype mapping table in i40e PMD.
Commands allow to print table, modify it and reset to default value.
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
PMDs which expose this offload cap supports optimization for fast release
of mbufs following successful Tx.
Such optimization requires that per queue, all mbufs come from the same
mempool and has refcnt = 1.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Introduce a new API to configure Tx offloads.
In the new API, offloads are divided into per-port and per-queue
offloads. The PMD reports capability for each of them.
Offloads are enabled using the existing DEV_TX_OFFLOAD_* flags.
To enable per-port offload, the offload should be set on both device
configuration and queue configuration. To enable per-queue offload, the
offloads can be set only on queue configuration.
In addition the Tx offloads will be disabled by default and be
enabled per application needs. This will much simplify PMD management of
the different offloads.
Applications should set the ETH_TXQ_FLAGS_IGNORE flag on txq_flags
field in order to move to the new API.
The old Tx offloads API is kept for the meanwhile, in order to enable a
smooth transition for PMDs and application to the new API.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Introduce a new API to configure Rx offloads.
In the new API, offloads are divided into per-port and per-queue
offloads. The PMD reports capability for each of them.
Offloads are enabled using the existing DEV_RX_OFFLOAD_* flags.
To enable per-port offload, the offload should be set on both device
configuration and queue configuration. To enable per-queue offload, the
offloads can be set only on queue configuration.
Applications should set the ignore_offload_bitfield bit on rxmode
structure in order to move to the new API.
The old Rx offloads API is kept for the meanwhile, in order to enable a
smooth transition for PMDs and application to the new API.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add support for parsing the packet type and L2/L3 checksum offload
capability information.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Add support for get/set_eeprom, get_eeprom_length dev_ops.
Defined the structures required to get/set the eeprom length/data
in hsi_struct_defs hdr file along with implementation.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This removes the dependency on specific Mellanox OFED libraries by
using the upstream rdma-core and linux upstream community code.
Both rdma-core upstream and Mellanox OFED are Linux user-space packages:
1. Rdma-core is Linux upstream user-space package.(Generic)
2. Mellanox OFED is Mellanox's Linux user-space package.(Proprietary)
The difference between the two are the APIs towards the kernel.
Support for x86-32 is removed due to issues in rdma-core library.
ICC compilation will be supported as soon as the following patch is
integrated in rdma-core:
https://marc.info/?l=linux-rdma&m=150643474705690&w=2
Signed-off-by: Shachar Beiser <shacharbe@mellanox.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
The flow API is supported in TAP PMD if flower is supported in Linux.
Some commands are combined to suggest a convenient check of its support
by the running kernel.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Pascal Mazon <pascal.mazon@6wind.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
- Use rte_malloc() instead of malloc() for the per device 'vdev' structure
so that it can be shared across processes.
- Only initialize the device if the process type is RTE_PROC_PRIMARY
- Only allow the primary process to do queue setup, start/stop, promisc
allmulticast, mac add/del, mtu.
Fixes: fefed3d1e6 ("enic: new driver")
Cc: stable@dpdk.org
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Mellanox NICs has a limitation on the number of mbuf segments a multi
segment mbuf can have. The max number depends on the Tx offloads
requested.
The current code not enforce such limitation, which might cause
malformed work requests to be written to the device.
This commit adds verification for the number of mbuf segments posted
to the device. In case of overflow the packet will not be sent.
In addition update the nic documentation with the limitation.
Considering device limitation is 63 data segments in a work request, the
maximum number of segment in mbuf was calculated taking TSO as the worst
case:
max_nb_segs = 63 - (control_segment + ethernet segment +
TSO headers inline + inline segment +
extra inline to align to cacheline)
Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Extend the LSC event handling to support the device removal as well.
The mlx5 event handling has been made capable of receiving and
signaling several event types at once.
This support includes next:
1. Removal event detection according to the user configuration.
2. Calling to all registered mlx5 removal callbacks.
3. Capabilities extension to include removal interrupt handling.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
NFP PMD implement now PF and VF drivers. Although the driver
functionality is the same by now, except for initialization, it
will change with future PF additions.
A new feature is required for describing the firmware upload
capability coming with the NFP PF now, so the PF file will be
updated soon in another patch.
SRIOV is not supported by the PF yet, and it is wrong to include it
as a VF driver feature, so none of the files have such a feature.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
NFP PMD has now support for both, PF and VFs. This patch updates
the guide and give some information about implications.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Reviewed-by: John McNamara <john.mcnamara@intel.com>
The Verbs API used to implement Tx and Rx burst functions is deprecated.
Drop scatter/gather support to ease refactoring while maintaining basic
single-segment Rx/Tx functionality in the meantime.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The Verbs API used to implement packet type recognition is deprecated.
Support will be added back after refactoring the PMD.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The Verbs API used to implement Tx and Rx checksum offloads is deprecated.
Support for these will be added back after refactoring the PMD.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The Verbs RSS API used in this PMD is now obsolete. It is superseded by an
enhanced API with fewer constraints already used in the mlx5 PMD.
Drop RSS support in preparation for a major refactoring. The ability to
configure several Rx queues is retained, these can be targeted directly by
creating specific flow rules.
There is no need for "ignored" Rx queues anymore since their number is no
longer limited to powers of two.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Only the default port MAC address remains and is not configurable.
This is done in preparation for a major refactoring.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This option both sets the maximum number of segments for Rx/Tx packets and
whether scattered mode is supported at all. This commit removes the latter
as well as configuration file exposure since the most appropriate value
should be decided at run-time.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Current implementation is partial (Tx only), not convenient to use and
not of primary concern.
Remove this feature before refactoring the PMD.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Copyright lasts long enough not to require notices to be updated yearly.
The current approach of updating them occasionally while working on
unrelated tasks should be deprecated in favor of dedicated commits updating
all files at once when necessary.
Standardize on a single year per copyright owner.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This patch adds link to the DPDK i40e doc,
which is how to upgrade firmware guide for users.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Support for the feature is added to EFX Tx datapath
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Support for the feature is added to EFX Rx datapath
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Support MTU change in the range ETHER_MIN_MTU to PF_MTU. A drop in PF
MTU lowers VF MTU if it goes out of range.
Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
Secondary process is a copy/paste of the mlx4 drivers, it was never
tested and it even segfault at the secondary process start in the
mlx5_pci_probe().
This makes more sense to wipe this non working feature to re-write a
working and functional version.
Fixes: a48deada65 ("mlx5: allow operation in secondary processes")
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
These PMDs must be versioned because they have an API.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Zhiyong Yang <zhiyong.yang@intel.com>
The patch simplifies DPDK applications analysis for developers which use
Intel® VTune Amplifier.
The empty cycles are such iterations that yielded no RX packets. As far as
DPDK is running in poll mode, wasting cycles is equal to wasting CPU time.
Tracing such iterations can identify that device is underutilized. Tracing
empty cycles becomes even more critical if a system uses a lot of Ethernet
ports.
The patch gives possibility to analyze empty cycles without changing
application code. All needs to be done is just to reconfigure and rebuild
the DPDK itself with CONFIG_RTE_ETHDEV_PROFILE_ITT_WASTED_RX_ITERATIONS
enbled. The important thing here is that this does not affect DPDK code.
The profiling code is not being compiled if user does not specify config
flag.
The patch provides common way to inject RX queues profiling and VTune
specific implementation.
Signed-off-by: Ilia Kurakin <ilia.kurakin@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add a section on the service cores API changes to 17.11 release notes.
Suggested-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
This commit fixes an issue in the service runner function,
where the atomic value was not cleared on exiting the service
function. This resulted in future attempts to run the service
to appear like the function was running, however it was in
reality deadlocked.
This commit refactors the atomic handling to be more readable,
by splitting the implementation code into a new static inline
function. The remaining flow control of atomics in the existing
function is refactored for readability.
Fixes: 21698354c8 ("service: introduce service cores concept")
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
This patch adds a new eth_dev layer API function rte_eth_dev_reset(),
which a DPDK application can call to reset a NIC and keep its port id
afterwards. It means that all software resources allocated in the ethdev
layer are kept, and software & hardware resources of the NIC within the
NIC's PMD are reset to a state simular to that obtained by calling the
PCI dev_uninit() and then dev_init(). This effective sequence of
dev_uninit() and dev_init() is packed into a single API function
rte_eth_dev_reset().
Please see the comments before the declaration of rte_eht_dev_reset()
in lib/librte_ether/rte_ethdev.h to get more details on why this
function is needed, what it does, when it should be called
and what an application should do after calling this function.
See also detailed explanations in the programmer's guide.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Reviewed-by: Remy Horton <remy.horton@intel.com>
Add template release notes for DPDK 17.11 with inline
comments and explanations of the various sections.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Bumping the library version to reflect the ABI change, where
rte_event_pmd_pci_probe(), rte_event_pmd_pci_remove(),
rte_event_pmd_vdev_init(), rte_event_pmd_vdev_uninit()
functions removed from the library.
Fixes: b1b3d9f905 ("eventdev: make vdev init and uninit functions optional")
Fixes: 9a8269d569 ("eventdev: make PCI probe and remove functions optional")
Reported-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
librte_eventdev.so.1 was introduced in v17.05, and it missed to
update in release_17_05 release notes.
Fixes: 222555480a ("version: 17.05.0")
Cc: stable@dpdk.org
Reported-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
rte_cryptodev_allocate_driver() function gets one parameter
(rte_driver), as the cryptodev_driver structure is
allocated inside the function with rte_malloc.
This function is called from a constructor function,
when crypto PMDs are registered.
If malloc fails, there is no way to recover from it,
so it is better to allocate this structure
statically, in each PMD.
Therefore, it is required to add an extra parameter in
this function, to also get a pointer to this structure.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
In order to remove all dependencies on vdev for cryptodev,
the implementation of rte_cryptodev_vdev_pmd_init() function
needs to be moved to rte_cryptodev_vdev.h, and all crypto
vdevs will include it, and therefore, this function will
be removed as a public API.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Support for security operations is planned to be added
in ethdev and cryptodev for the 17.11 release.
For this following changes are required.
- rte_cryptodev and rte_eth_dev structures need to be added
new parameter rte_security_ops which extend support for
security ops to the corresponding driver.
- rte_cryptodev_info and rte_ethd_dev_info need to be added
with rte_security_capabilities to identify the capabilities of
the corresponding driver.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Boris Pismenny <borisp@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
VMBUS support will use GUID in eth_dev_data name field which requires
at least 37 characters. Plan for increase in size now.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
This is an API/ABI change notice for DPDK 17.11 announcing the redefinition
of port_id. port_id is currently defined as uint8_t, which is limited to
the range 0 to 255. A larger range is required for vdev scalability.
It is necessary for a redefinition of port_id to extend it from 1 bytes to
2 bytes. All ethdev APIs and usages related to port_id will be changed at
the same time.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The flag RTE_ETH_DEV_DETACHABLE will disappear.
This flag is not needed anymore following the hotplug work done for
v17.08. It can be removed, its function is now implicitly made available
by the relevant EAL and rte_bus implementations.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
An API/ABI change is planned for 17.11 to change following
* Remove unused flag param from rte_mempool_generic_get and _put.
* Change data type for mempool 'flag' from int to unsigned int.
Refer [1].
* Add struct rte_mempool * param into func rte_mempool_xmem_size,
rte_mempool_xmem_usage to make it mempool aware.
Refer [2].
[1] http://dpdk.org/dev/patchwork/patch/25603/
[2] http://dpdk.org/dev/patchwork/patch/25605/
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
When we run DPDK on guest or VFIO mode on host,
the dpdk library or device will not be directly accessing
the physical address. Instead, the device does go through
an IO address translation memory management unit. On x86,
we call it as IOMMU and on ARM as SMMU.
More details:
http://osidays.com/osidays/wp-content/uploads/2014/12/Final_OSI2014_IOMMU_DetailedView_Sanil_Anurup.pdf
Based on discussion in the following thread
http://dpdk.org/ml/archives/dev/2017-July/070850.html
We would like to change reference to physical address to more
appropriate name as with IOMMU/SMMU with
the device won't be dealing directly with the physical address.
An ABI change is planned for 17.11 to change following
data structure or functions to more appropriate name.
Currently planned to change it iova as instead of phys
Please note: The change will be only for the name and
functional aspects of the API will remain same.
Following functions/data structures name may change.
This list is based on v17.05-rc1. It may change based on v17.11 code base.
typedef:
phys_addr_t
structures:
struct rte_memseg::phys_addr
struct rte_mbuf::buf_physaddr
functions:
rte_mempool_populate_phys()
rte_mempool_populate_phys_tab()
rte_eal_using_phys_addrs()
rte_mem_virt2phy()
rte_dump_physmem_layout()
rte_eal_get_physmem_layout()
rte_eal_get_physmem_size()
rte_malloc_virt2phy()
rte_mem_phy2mch()
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Following the calls on the mailing list:
http://dpdk.org/ml/archives/dev/2017-June/068151.html
The Technical Board decided to drop Xen dom0 support from EAL:
http://dpdk.org/ml/archives/dev/2017-June/068615.html
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The vdev subsystem is a driver,
and the struct rte_pci_driver is not used anymore
in generic driver interfaces.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The replacement function rte_log_get_level() has just been implemented
in 17.08. Better to postpone the removal of legacy functions to 17.11.
Fixes: 4f0981e6ec ("eal: deprecate log functions")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
