Riverhead supports many Rx prefixes. The Rx prefix may be chosen
based on which information is required.
To have better performance choose the smallest Rx prefix which
meets our requirements.
Right now there is no way to specify requirements on Rx queue
creation, but it could be added in the future.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Make number of efx_mcdi_init_rxq() arguments reasonable before
addition of one more argument.
Non essential parameters not supported in some cases are moved
into helper structure.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Define default Siena, EF10 default, packed stream, equal-stride
superbuffer and Riverhead default prefixes in order to make an API
to get Rx prefix layout information generic and usable on all NICs.
Riverhead supports many Rx prefixes. Riverhead FW supports MCDI to
choose Rx prefix based on required Rx prefix fields and allows to
query the prefix layout using MCDI. The patch prepares to introduce
the support in libefx and provides fallback for NICs and FW which
lacks the support.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
efsys.h may depends on target system headers only. Otherwise, it could
result in cross-dependency when libefx header depends on efsys.h and
efsys.h depends on the libefx header.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <andrewle@xilinx.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Riverhead puts a number of restrictions on TSO transactions.
Reflect some of them in the NIC configuration structure.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <andrewle@xilinx.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Riverhead boards support TSO version 3.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <andrewle@xilinx.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Introduce a new event callback which has the same prototype, but
provides number of completed descriptors instead of the last
completed descriptor index.
When all libefx-based drivers implement the new callback, libefx
may be updated to use it for Siena and EF10 family NICs and
the old one may be removed.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Rx event on Riverhead provides a number of received packets and
no classification/offloads information is available Rx event.
Introduce a new event callback to be implemented by drivers.
The callback provides information about the number of completed
packets. libefx-based drivers should implement the new callback
for Riverhead and keep the old one for Siena and EF10 NICs.
The new callback may be used for Medford2 NO_CONT_EV Rx mode
support.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Rx/Tx queue DMA sync should not assume descriptor size to be the same
for all NIC familties since it Tx descritor size is 16 on Riverhead.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Tx control path on Riverhead is very similar to EF10, but datapath
differs a lot since Tx descriptor size is 16 bytes (vs 8 bytes on EF10).
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reuse EF10 RSS-related functions since current version of the RSS
interface is compatible with EF10.
Implement own functions to create and destroy Rx queues which reuse
MCDI wrappers which are shared with EF10.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Make NIC family specific functions a bit shorter and reduce
code duplication.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Rx queue structure is allocated in generic code, but was freed in NIC
family specific callbacks. Move free to generic function makes NIC
family specific callbacks shorter and reduces code duplication.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
The counter is incremented in generic efx_rx_qcreate(), but was
asserted and decremented in NIC family specific queue create and
destroy callbacks. Move assert and decrement to generic functions
as well to make NIC family specific callbacks shorter.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Extended version of MCDI allows up to 64 DMA addresses which are
required for Riverhead.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
TxQ init/fini MCDI is similar on Riverhead and these
functions should be reused to implement TxQ creation and
destruction on Riverhead.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Vijay Kumar Srivastava <vsrivast@xilinx.com>
RxQ init/fini MCDI is similar on Riverhead and these
functions should be reused to implement RxQ creation and
destruction on Riverhead.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
EF100 MCDI event layout is same as on EF10 except added QDMA phase
bit which is unused on EF10.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Client drivers relying on interrupts will fail to complete event
queue creation on Riverhead boards as the latter have no support
for INIT_DONE events which means that it's useless to wait until
initialisation callback is triggered by interrupt-driven polling.
Client drivers which avoid interrupt-driven polling still handle
INIT_DONE events by direct polling and will fail to do so.
Solve this problem by adding an extra poll-once method which
will be called by client drivers after queue creation (probably,
with driver-specific lock being held). The method will invoke
initialisation callback on Riverhead and do nothing on the other
boards. Then the drivers will proceed with normal waiting which
will complete immediately in the case of Riverhead.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Events are significantly reworked on Riverhead, so it is better
to implement own set of callbacks to simplify future development
and avoid inheritance of legacy code.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
The decision on which version of the INIT_EVQ command to use may
be done inside the function itself. Caller should just provide
enough information sufficient in both cases. It avoids code
duplication and simplifies maintenance.
If v2 is not supported, keep decision about low-latency hint outside
the MCDI helper function since it will differ on Riverhead (there is
no EVB yet, but still want merging for better throughput).
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
v1 and v2 defines are the same except output length.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
There is no point to duplicate these generic checks in NIC family
specific handlers.
As the side effect it fixes bug with incorrect interrupt moderation
settings silently ignored on event queue create on Siena.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Vijay Kumar Srivastava <vsrivast@xilinx.com>
EvQ init/fini MCDI is similar on Riverhead and these
functions should be reused to implement EvQ creation and
destruction on Riverhead.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Vijay Kumar Srivastava <vsrivast@xilinx.com>
Riverhead supports interrupt aggregation rings. Right now there
are no plans to support it in libefx, but it is better to have
own set of callbacks to easier handle EF10 and Riverhead
differences in the future.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
There is no difference yet in MAC support on EF10 and Riverhead.
So, it is better to reuse existing methods.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Vijay Kumar Srivastava <vsrivast@xilinx.com>
Filtering MCDI on Riverhead are the same as on EF10.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Vijay Kumar Srivastava <vsrivast@xilinx.com>
Define basic NIC features and limitations.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Vijay Kumar Srivastava <vsrivast@xilinx.com>
There is no point to duplicate it NIC family specific probe handlers.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
ef10_get_datapath_caps() should simply fill in NIC configuration
based MC_CMD_GET_CAPABILITIES output.
Number of PFs is a part of board configuration should be obtained
in corresponding function.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
The function which gets capabilities from MC should simply fill in
NIC configuration. Caller should decide if the configuration is
supported or not.
The change is required to prepare the function to be reused on
Riverhead.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
There is no difference yet in PHY support on EF10 and Riverhead.
So, it is better to reuse existing methods.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Vijay Kumar Srivastava <vsrivast@xilinx.com>
MCDI on Riverhead is very close to the EF10 and there is no
point to duplicate the code.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Riverhead family got letter 'G' for registers definition.
Registers used for Riverhead should have the letter in the
specification range.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Vijay Kumar Srivastava <vsrivast@xilinx.com>
Riverhead is the first NIC family of the EF100 architecture.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Vijay Kumar Srivastava <vsrivast@xilinx.com>
Event queue host interface differ on Riverhead and implementation
will be different.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Adding support for RTE Flow VLAN insert and strip actions.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
When TX side VTAG insertion is enabled, SMQ should be configured with
the maximum VTAG insertion size to avoid generating NIX_SQINT_SEND_ERR
interrupt. Since the default value is zero, This patch configures the
VTAG insertion size to the max supported value.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
This patch adds required bit to handle VF FLR
indication from Management FW (MFW) of the device
With that VFs were able to load in VM (VF attached as PCI
passthrough to the guest VM) followed by FLR successfully
Updated the docs/guides with the feature support
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Rasesh Mody <rmody@marvell.com>
This patch configures VFs with random mac if no MAC is
provided by the PF/bulletin. This also adds required bulletin
APIs by PF-PMD driver to communicate LINK properties/changes to
the VFs through bulletin update mechanism.
With these changes, VF-PMD instance is able to run
fastpath over PF-PMD driver instance.
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Rasesh Mody <rmody@marvell.com>
This patch adds necessary infrastructure support (required to handle
messages from VF and sending ramrod on behalf of VF's configuration
request from alarm handler context) to start/load the VF-PMD driver
instance on top of PF-PMD driver instance.
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Based on number of VFs enabled at PCI, PF-PMD driver instance
enables/configures those VFs from hardware perspective, such
that in later patches they could get required HW access to
communicate with PFs for slowpath configuration and run the
fastpath themselves.
This patch also add two new qede IOV files [qede_sriov(.c|.h)]
under qede directory to add non-base driver IOV APIs/contents there.
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Rasesh Mody <rmody@marvell.com>
This patch defines various PCI config space access APIs
in order to read and find IOV specific PCI capabilities.
With these definitions implemented, it enables the base
driver to do SR-IOV specific initialization and HW specific
configuration required from PF-PMD driver instance.
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Rasesh Mody <rmody@marvell.com>
