Add support to AES-CCM, for 128, 192 and 256-bit keys.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
The Multi-buffer library now supports DES-CBC
and DES-DOCSISBPI algorithms, so this commit
extends adds support for them in the PMD.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Reviewed-by: Radu Nicolau <radu.nicolau@intel.com>
Since the crypto perf application is flexible enough
to cover all the crypto performance tests, these are not needed
anymore, so they will be removed to avoid duplications.
Besides, the crypto perf application gives the user more options
to get performance, for every single supported algorithm,
such as varying the buffer size as the user wants.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch adds a new benchmarking mode, which is intended for
microbenchmarking individual parts of the cryptodev framework,
specifically crypto ops alloc-build-free, cryptodev PMD enqueue
and cryptodev PMD dequeue.
It works by first benchmarking crypto operation alloc-build-free
loop (no enqueues/dequeues happening), and then benchmarking
enqueue and dequeue separately, by first completely filling up the
TX queue, and then completely draining the RX queue.
Results are shown as cycle counts per alloc/build/free, PMD enqueue
and PMD dequeue.
One new test mode is added: "pmd-cyclecount"
(called with --ptest=pmd-cyclecount)
New command-line argument is also added:
--pmd-cyclecount-delay-ms: this is a pmd-cyclecount-specific parameter
that controls the delay between enqueue and dequeue. This is
useful for benchmarking hardware acceleration, as hardware may
not be able to keep up with enqueued packets. This parameter
can be increased if there are large amounts of dequeue
retries.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Don't write CSR tail until we processed enough TX descriptors.
To avoid crypto operations sitting in the TX ring indefinitely,
the "force write" threshold is used:
- on TX, no tail write coalescing will occur if number of inflights
is below force write threshold
- on RX, check if we have a number of crypto ops enqueued that is
below force write threshold that are not yet submitted to
processing.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Don't write CSR head until we processed enough RX descriptors.
Also delay marking them as free until we are writing CSR head.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Replacing atomics in the QAT driver with simple 16-bit integers for
number of inflight packets.
This adds a new limitation to the QAT driver: each queue pair is
now explicitly single-threaded.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
When register a crypto driver, a cryptodev driver
structure was being allocated, using malloc.
Since this call may fail, it is safer to allocate
this memory statically in each PMD, so driver registration
will never fail.
Coverity issue: 158645
Fixes: 7a364faef1 ("cryptodev: remove crypto device type enumeration")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Reviewed-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
The stats_get dev op API doesn't include return value, so PMD cannot
return an error in case of failure at stats getting process time.
Since PCI devices can be removed and there is a time between the
physical removal to the RMV interrupt, the user may get invalid stats
without any indication.
This patch changes the stats_get API return value to be int instead of
void.
All the net PMDs stats_get dev ops are adjusted by this patch.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Some devices do not support reset of eth stats. An application may
need to know not to clear shadow stats if the device cannot.
rte_eth_stats_reset is updated to provide a return code to share
whether the device supports reset or not.
Signed-off-by: David Harton <dharton@cisco.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Allow sufficient space for UUID in string form (36+1).
Needed to use UUID with Hyper-V.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add mrvl net pmd driver skeleton providing base for the further
development. Besides the basic functionality QoS configuration is
introduced as well.
Signed-off-by: Jacek Siuda <jck@semihalf.com>
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
This patch adds GSO support for GRE-tunneled packets. Supported GRE
packets must contain an outer IPv4 header, and inner TCP/IPv4 headers.
They may also contain a single VLAN tag. GRE GSO doesn't check if all
input packets have correct checksums and doesn't update checksums for
output packets. Additionally, it doesn't process IP fragmented packets.
As with VxLAN GSO, GRE GSO uses a two-segment MBUF to organize each
output packet, which requires multi-segment mbuf support in the TX
functions of the NIC driver. Also, if a packet is GSOed, GRE GSO reduces
its MBUF refcnt by 1. As a result, when all of its GSOed segments are
freed, the packet is freed automatically.
Signed-off-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch adds a framework that allows GSO on tunneled packets.
Furthermore, it leverages that framework to provide GSO support for
VxLAN-encapsulated packets.
Supported VxLAN packets must have an outer IPv4 header (prepended by an
optional VLAN tag), and contain an inner TCP/IPv4 packet (with an optional
inner VLAN tag).
VxLAN GSO doesn't check if input packets have correct checksums and
doesn't update checksums for output packets. Additionally, it doesn't
process IP fragmented packets.
As with TCP/IPv4 GSO, VxLAN GSO uses a two-segment MBUF to organize each
output packet, which mandates support for multi-segment mbufs in the TX
functions of the NIC driver. Also, if a packet is GSOed, VxLAN GSO
reduces its MBUF refcnt by 1. As a result, when all of its GSO'd segments
are freed, the packet is freed automatically.
Signed-off-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch adds GSO support for TCP/IPv4 packets. Supported packets
may include a single VLAN tag. TCP/IPv4 GSO doesn't check if input
packets have correct checksums, and doesn't update checksums for
output packets (the responsibility for this lies with the application).
Additionally, TCP/IPv4 GSO doesn't process IP fragmented packets.
TCP/IPv4 GSO uses two chained MBUFs, one direct MBUF and one indrect
MBUF, to organize an output packet. Note that we refer to these two
chained MBUFs as a two-segment MBUF. The direct MBUF stores the packet
header, while the indirect mbuf simply points to a location within the
original packet's payload. Consequently, use of the GSO library requires
multi-segment MBUF support in the TX functions of the NIC driver.
If a packet is GSO'd, TCP/IPv4 GSO reduces its MBUF refcnt by 1. As a
result, when all of its GSOed segments are freed, the packet is freed
automatically.
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Signed-off-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Lei Yao <lei.a.yao@intel.com>
Generic Segmentation Offload (GSO) is a SW technique to split large
packets into small ones. Akin to TSO, GSO enables applications to
operate on large packets, thus reducing per-packet processing overhead.
To enable more flexibility to applications, DPDK GSO is implemented
as a standalone library. Applications explicitly use the GSO library
to segment packets. To segment a packet requires two steps. The first
is to set proper flags to mbuf->ol_flags, where the flags are the same
as that of TSO. The second is to call the segmentation API,
rte_gso_segment(). This patch introduces the GSO API framework to DPDK.
rte_gso_segment() splits an input packet into small ones in each
invocation. The GSO library refers to these small packets generated
by rte_gso_segment() as GSO segments. Each of the newly-created GSO
segments is organized as a two-segment MBUF, where the first segment is a
standard MBUF, which stores a copy of packet header, and the second is an
indirect MBUF which points to a section of data in the input packet.
rte_gso_segment() reduces the refcnt of the input packet by 1. Therefore,
when all GSO segments are freed, the input packet is freed automatically.
Additionally, since each GSO segment has multiple MBUFs (i.e. 2 MBUFs),
the driver of the interface which the GSO segments are sent to should
support to transmit multi-segment packets.
The GSO framework clears the PKT_TX_TCP_SEG flag for both the input
packet, and all produced GSO segments in the event of success, since
segmentation in hardware is no longer required at that point.
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Signed-off-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This commit bumps the library version to refect the ABI change
caused by removing the individual rte_event_port_count, queue_count,
and other get functions. These functions are superseded by the
get-attribute style API, which allows fetching values without API/ABI
changes.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
We remove xen-specific code in EAL, including the option --xen-dom0,
memory initialization code, compiling dependency, etc.
Related documents are removed or updated, and bump the eal library
version.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Previously, to get MFN address in dom0, this API is a wrapper to
obtain the "physical address".
As we will removed xen dom0 support, this API is not necessary.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This patch adds the documentation for membership library.
Signed-off-by: Yipeng Wang <yipeng1.wang@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Extend port_id definition from uint8_t to uint16_t in lib and drivers
data structures, specifically rte_eth_dev_data. Modify the APIs,
drivers and app using port_id at the same time.
Fix some checkpatch issues from the original code and remove some
unnecessary cast operations.
release_17_11 and deprecation docs have been updated in this patch.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
These PMDs must be versioned because they have an API.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Zhiyong Yang <zhiyong.yang@intel.com>
Add a section on the service cores API changes to 17.11 release notes.
Suggested-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
This commit fixes an issue in the service runner function,
where the atomic value was not cleared on exiting the service
function. This resulted in future attempts to run the service
to appear like the function was running, however it was in
reality deadlocked.
This commit refactors the atomic handling to be more readable,
by splitting the implementation code into a new static inline
function. The remaining flow control of atomics in the existing
function is refactored for readability.
Fixes: 21698354c8 ("service: introduce service cores concept")
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Add template release notes for DPDK 17.11 with inline
comments and explanations of the various sections.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Bumping the library version to reflect the ABI change, where
rte_event_pmd_pci_probe(), rte_event_pmd_pci_remove(),
rte_event_pmd_vdev_init(), rte_event_pmd_vdev_uninit()
functions removed from the library.
Fixes: b1b3d9f905 ("eventdev: make vdev init and uninit functions optional")
Fixes: 9a8269d569 ("eventdev: make PCI probe and remove functions optional")
Reported-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
librte_eventdev.so.1 was introduced in v17.05, and it missed to
update in release_17_05 release notes.
Fixes: 222555480a ("version: 17.05.0")
Cc: stable@dpdk.org
Reported-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
rte_cryptodev_allocate_driver() function gets one parameter
(rte_driver), as the cryptodev_driver structure is
allocated inside the function with rte_malloc.
This function is called from a constructor function,
when crypto PMDs are registered.
If malloc fails, there is no way to recover from it,
so it is better to allocate this structure
statically, in each PMD.
Therefore, it is required to add an extra parameter in
this function, to also get a pointer to this structure.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
In order to remove all dependencies on vdev for cryptodev,
the implementation of rte_cryptodev_vdev_pmd_init() function
needs to be moved to rte_cryptodev_vdev.h, and all crypto
vdevs will include it, and therefore, this function will
be removed as a public API.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Support for security operations is planned to be added
in ethdev and cryptodev for the 17.11 release.
For this following changes are required.
- rte_cryptodev and rte_eth_dev structures need to be added
new parameter rte_security_ops which extend support for
security ops to the corresponding driver.
- rte_cryptodev_info and rte_ethd_dev_info need to be added
with rte_security_capabilities to identify the capabilities of
the corresponding driver.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Boris Pismenny <borisp@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
VMBUS support will use GUID in eth_dev_data name field which requires
at least 37 characters. Plan for increase in size now.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
This is an API/ABI change notice for DPDK 17.11 announcing the redefinition
of port_id. port_id is currently defined as uint8_t, which is limited to
the range 0 to 255. A larger range is required for vdev scalability.
It is necessary for a redefinition of port_id to extend it from 1 bytes to
2 bytes. All ethdev APIs and usages related to port_id will be changed at
the same time.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The flag RTE_ETH_DEV_DETACHABLE will disappear.
This flag is not needed anymore following the hotplug work done for
v17.08. It can be removed, its function is now implicitly made available
by the relevant EAL and rte_bus implementations.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
An API/ABI change is planned for 17.11 to change following
* Remove unused flag param from rte_mempool_generic_get and _put.
* Change data type for mempool 'flag' from int to unsigned int.
Refer [1].
* Add struct rte_mempool * param into func rte_mempool_xmem_size,
rte_mempool_xmem_usage to make it mempool aware.
Refer [2].
[1] http://dpdk.org/dev/patchwork/patch/25603/
[2] http://dpdk.org/dev/patchwork/patch/25605/
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
When we run DPDK on guest or VFIO mode on host,
the dpdk library or device will not be directly accessing
the physical address. Instead, the device does go through
an IO address translation memory management unit. On x86,
we call it as IOMMU and on ARM as SMMU.
More details:
http://osidays.com/osidays/wp-content/uploads/2014/12/Final_OSI2014_IOMMU_DetailedView_Sanil_Anurup.pdf
Based on discussion in the following thread
http://dpdk.org/ml/archives/dev/2017-July/070850.html
We would like to change reference to physical address to more
appropriate name as with IOMMU/SMMU with
the device won't be dealing directly with the physical address.
An ABI change is planned for 17.11 to change following
data structure or functions to more appropriate name.
Currently planned to change it iova as instead of phys
Please note: The change will be only for the name and
functional aspects of the API will remain same.
Following functions/data structures name may change.
This list is based on v17.05-rc1. It may change based on v17.11 code base.
typedef:
phys_addr_t
structures:
struct rte_memseg::phys_addr
struct rte_mbuf::buf_physaddr
functions:
rte_mempool_populate_phys()
rte_mempool_populate_phys_tab()
rte_eal_using_phys_addrs()
rte_mem_virt2phy()
rte_dump_physmem_layout()
rte_eal_get_physmem_layout()
rte_eal_get_physmem_size()
rte_malloc_virt2phy()
rte_mem_phy2mch()
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Following the calls on the mailing list:
http://dpdk.org/ml/archives/dev/2017-June/068151.html
The Technical Board decided to drop Xen dom0 support from EAL:
http://dpdk.org/ml/archives/dev/2017-June/068615.html
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The vdev subsystem is a driver,
and the struct rte_pci_driver is not used anymore
in generic driver interfaces.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The replacement function rte_log_get_level() has just been implemented
in 17.08. Better to postpone the removal of legacy functions to 17.11.
Fixes: 4f0981e6ec ("eal: deprecate log functions")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The original purpose of this deprecation is to make sure PCI devices
are reset whenever DPDK apps crash.
Since the commit b58eedfc7d from Shijith can fix this problem without
deprecating anything, now there is no need to deprecate iomem and ioport
mapping in igb_uio.
Fixes: 3bac1dbc1e ("doc: announce iomem and ioport removal from igb_uio")
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
It is very difficult to list OS which are really supported.
Instead of continuing this unrealistic effort, a more reliable list
of tested platforms and OS is updated in the release notes.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: John McNamara <john.mcnamara@intel.com>
Add tested Intel platforms with Intel NICs to the release note.
Signed-off-by: Yulong Pei <yulong.pei@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Fixes: 0667319395 ("doc: add libnuma as dependency")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: John McNamara <john.mcnamara@intel.com>
The work on ethdev Rx and Tx offloads has not been completed for 17.08.
It will be completed on 17.11
The notice is kept and postponed until the end of this work.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
The function rte_cryptodev_create_vdev is an alias
for rte_vdev_init() which is scheduled to move out of the
rte_eal library. Lets deprecate this function to be able to
remove it from the cryptodev library in 17.11.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
The _rte_eth_dev_callback_process function has been modified.
The return value has been changed form void to int and an
extra parameter "void *ret_param" has been added.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Crypto operation status RTE_CRYPTO_OP_STATUS_ENQUEUED is removed
from rte_crypto.h as it is not needed for crypto operation processing.
This status value is redundant to RTE_CRYPTO_OP_STATUS_NOT_PROCESSED value
and it was not intended to be part of public API.
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Crypto keys and digests are not expected
to be big, so using a uint16_t to store
their lengths should be enough.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Additional Authenticated Data (AAD) was removed from the
authentication parameters, but still the supported size
was part of the authentication capabilities of a PMD.
Fixes: 4428eda8bb ("cryptodev: remove AAD from authentication structure")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Add header files, update .map files with new service
functions, and add the service header to the doxygen
for building.
This service header API allows DPDK to use services as
a concept of something that requires CPU cycles. An example
is a PMD that runs in software to schedule events, where a
hardware version exists that does not require a CPU.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Added API change description - moved bypass functions
from the rte_ethdev library to ixgbe PMD
Fixes: e261265e42 ("ethdev: move bypass functions to ixgbe PMD")
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
In this patch, we introduce five APIs to support TCP/IPv4 GRO.
- gro_tcp4_reassemble: reassemble an inputted TCP/IPv4 packet.
- gro_tcp4_tbl_create: create a TCP/IPv4 reassembly table, which is used
to merge packets.
- gro_tcp4_tbl_destroy: free memory space of a TCP/IPv4 reassembly table.
- gro_tcp4_tbl_pkt_count: return the number of packets in a TCP/IPv4
reassembly table.
- gro_tcp4_tbl_timeout_flush: flush timeout packets from a TCP/IPv4
reassembly table.
TCP/IPv4 GRO API assumes all inputted packets are with correct IPv4
and TCP checksums. And TCP/IPv4 GRO API doesn't update IPv4 and TCP
checksums for merged packets. If inputted packets are IP fragmented,
TCP/IPv4 GRO API assumes they are complete packets (i.e. with L4
headers).
In TCP/IPv4 GRO, we use a table structure, called TCP/IPv4 reassembly
table, to reassemble packets. A TCP/IPv4 reassembly table includes a key
array and a item array, where the key array keeps the criteria to merge
packets and the item array keeps packet information.
One key in the key array points to an item group, which consists of
packets which have the same criteria value. If two packets are able to
merge, they must be in the same item group. Each key in the key array
includes two parts:
- criteria: the criteria of merging packets. If two packets can be
merged, they must have the same criteria value.
- start_index: the index of the first incoming packet of the item group.
Each element in the item array keeps the information of one packet. It
mainly includes three parts:
- firstseg: the address of the first segment of the packet
- lastseg: the address of the last segment of the packet
- next_pkt_index: the index of the next packet in the same item group.
All packets in the same item group are chained by next_pkt_index.
With next_pkt_index, we can locate all packets in the same item
group one by one.
To process an incoming packet needs three steps:
a. check if the packet should be processed. Packets with one of the
following properties won't be processed:
- FIN, SYN, RST, URG, PSH, ECE or CWR bit is set;
- packet payload length is 0.
b. traverse the key array to find a key which has the same criteria
value with the incoming packet. If find, goto step c. Otherwise,
insert a new key and insert the packet into the item array.
c. locate the first packet in the item group via the start_index in the
key. Then traverse all packets in the item group via next_pkt_index.
If find one packet which can merge with the incoming one, merge them
together. If can't find, insert the packet into this item group.
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Reviewed-by: Jianfeng Tan <jianfeng.tan@intel.com>
Generic Receive Offload (GRO) is a widely used SW-based offloading
technique to reduce per-packet processing overhead. It gains
performance by reassembling small packets into large ones. This
patchset is to support GRO in DPDK. To support GRO, this patch
implements a GRO API framework.
To enable more flexibility to applications, DPDK GRO is implemented as
a user library. Applications explicitly use the GRO library to merge
small packets into large ones. DPDK GRO provides two reassembly modes.
One is called lightweight mode, the other is called heavyweight mode.
If applications want to merge packets in a simple way and the number
of packets is relatively small, they can use the lightweight mode.
If applications need more fine-grained controls, they can choose the
heavyweight mode.
rte_gro_reassemble_burst is the main reassembly API which is used in
lightweight mode and processes N packets at a time. For applications,
performing GRO in lightweight mode is simple. They just need to invoke
rte_gro_reassemble_burst. Applications can get GROed packets as soon as
rte_gro_reassemble_burst returns.
rte_gro_reassemble is the main reassembly API which is used in
heavyweight mode and tries to merge N inputted packets with the packets
in GRO reassembly tables. For applications, performing GRO in heavyweight
mode is relatively complicated. Before performing GRO, applications need
to create a GRO context object, which keeps reassembly tables of
desired GRO types, by rte_gro_ctx_create. Then applications can use
rte_gro_reassemble to merge packets. The GROed packets are in the
reassembly tables of the GRO context object. If applications want to get
them, applications need to manually flush them by flush API.
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Reviewed-by: Jianfeng Tan <jianfeng.tan@intel.com>
Introduce a more versatile helper to parse device strings. This
helper expects a generic rte_devargs structure as storage in order not
to require API changes in the future, should this structure be
updated.
The old equivalent function is thus being deprecated, as its API does
not allow to accompany rte_devargs evolutions.
A deprecation notice is issued.
This new helper will parse bus information as well as device name and
device parameters. It does not allocate an rte_devargs structure and
expects one to be given as input.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
The dpdk-test-eventdev tool is a Data Plane Development Kit (DPDK)
application that allows exercising various eventdev use cases. This
application has a generic framework to add new eventdev based test cases
to verify functionality and measure the performance parameters of DPDK
eventdev devices.
This patch adds the skeleton of the dpdk-test-eventdev application.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
The session mempool pointer is needed in each queue pair,
if session-less operations are being handled.
Therefore, the API is changed to accept this parameter,
as the session mempool is created outside the
device configuration function, similar to what ethdev
does with the rx queues.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Change crypto device's session management to make it
device independent and simplify architecture when session
is intended to be used on more than one device.
Sessions private data is agnostic to underlying device
by adding an indirection in the sessions private data
using the crypto driver identifier.
A single session can contain indirections to multiple device types.
New function rte_cryptodev_sym_session_init has been created,
to initialize the driver private session data per driver to be
used on a same session, and rte_cryptodev_sym_session_clear
to clear this data before calling rte_cryptodev_sym_session_free.
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Mempool pointer can be obtained from the object itself,
which means that it is not required to actually store the pointer
in the session.
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Since crypto session will not be attached to a specific
device or driver, the field driver_id is not required
anymore (only used to check that a session was being
handled by the right device).
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Device id is necessary in the crypto session,
as it was only used for the functions that attach/detach
a session to a queue pair.
Since the session is not going to be attached to a device
anymore, this is field is no longer necessary.
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Device id is going to be removed from session,
as the session will be device independent.
Therefore, the functions that attach/dettach a session
to a queue pair need to be updated, to accept the device id
as a parameter, apart from the queue pair id and the session.
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Instead of creating the session mempool while configuring
the crypto device, apps will create the mempool themselves.
This way, it gives flexibility to the user to have a single
mempool for all devices (as long as the objects are big
enough to contain the biggest private session size) or
separate mempools for different drivers.
Also, since the mempool is now created outside the
device configuration function, now it needs to be passed
through this function, which will be eventually passed
when setting up the queue pairs, as ethernet devices do.
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Multi-core scheduling mode is a mode where scheduler distributes
crypto operations in a round-robin base, between several core
assigned as workers.
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Remove crypto device driver name string definitions from librte_cryptodev,
which avoid to library changes every time a new crypto driver was added.
The driver name is predefined internaly in the each PMD.
The applications could use the crypto device driver names based on
options with the driver name string provided in command line.
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Changes device type identification to be based on a unique
driver id replacing the current device type enumeration, which needed
library changes every time a new crypto driver was added.
The driver id is assigned dynamically during driver registration using
the new macro RTE_PMD_REGISTER_CRYPTO_DRIVER which returns a unique
uint8_t identifier for that driver. New APIs are also introduced
to allow retrieval of the driver id using the driver name.
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Since Intel Multi Buffer library for IPSec has been updated to
support Scatter Gather List, the AESNI GCM PMD can link
to this library, instead of the ISA-L library.
This move eases the maintenance of the driver, as it will
use the same library as the AESNI MB PMD.
It also adds support for 192-bit keys.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
IPSec Multi-buffer library v0.46 has been released,
which includes, among othe features, support for 12-byte IV,
for AES-CTR, keeping also the previous 16-byte IV,
for backward compatibility reasons.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
AES-GCM support is added as per the AEAD type of crypto
operations. Support for AES-CTR is also added.
test/crypto and documentation is also updated for
dpaa2_sec to add supported algorithms.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Now that AAD is only used in AEAD algorithms,
there is no need to keep AAD in the authentication
structure.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
AEAD operation parameters can be set in the new
aead structure, in the crypto operation.
This structure is within a union with the cipher
and authentication parameters, since operations can be:
- AEAD: using the aead structure
- Cipher only: using only the cipher structure
- Auth only: using only the authentication structure
- Cipher-then-auth/Auth-then-cipher: using both cipher
and authentication structures
Therefore, all three cannot be used at the same time.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
AEAD algorithms such as AES-GCM needed to be
used as a concatenation of a cipher transform and
an authentication transform.
Instead, a new transform and functions to handle it
are created to support these kind of algorithms,
making their use easier.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Digest length was duplicated in the authentication transform
and the crypto operation structures.
Since digest length is not expected to change in a same
session, it is removed from the crypto operation.
Also, the length has been shrunk to 16 bits,
which should be sufficient for any digest.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Additional authenticated data (AAD) information was duplicated
in the authentication transform and in the crypto
operation structures.
Since AAD length is not meant to be changed in a same session,
it is removed from the crypto operation structure.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Authentication algorithms, such as AES-GMAC or the wireless
algorithms (like SNOW3G) use IV, like cipher algorithms.
So far, AES-GMAC has used the IV from the cipher structure,
and the wireless algorithms have used the AAD field,
which is not technically correct.
Therefore, authentication IV parameters have been added,
so API is more correct. Like cipher IV, auth IV is expected
to be copied after the crypto operation.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Since IV parameters (offset and length) should not
change for operations in the same session, these parameters
are moved to the crypto transform structure, so they will
be stored in the sessions.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Since IV now is copied after the crypto operation, in
its private size, IV can be passed only with offset
and length.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Instead of storing a pointer to operation specific parameters,
such as symmetric crypto parameters, use a zero-length array,
to mark that these parameters will be stored after the
generic crypto operation structure, which was already assumed
in the code, reducing the memory footprint of the crypto operation.
Besides, it is always expected to have rte_crypto_op
and rte_crypto_sym_op (the only operation specific parameters
structure right now) to be together, as they are initialized
as a single object in the crypto operation pool.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Storing a pointer to the user data is unnecessary,
since user can store additional data, after the crypto operation.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Instead of storing some crypto operation flags,
such as operation status, as enumerations,
store them as uint8_t, for memory efficiency.
Also, reserve extra 5 bytes in the crypto operation,
for future additions.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Session type (operation with or without session) is not
something specific to symmetric operations.
Therefore, the variable is moved to the generic crypto operation
structure.
Since this is an ABI change, the cryptodev library version
gets bumped.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Add release notes update to announce support of rte_flow on igb NIC.
And update NIC features document for this feature.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Change the rte_eth_dev_callback_process function to return int,
and add a void *ret_param parameter.
The new parameter is used by ixgbe and i40e instead of abusing
the user data of the callback.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
This patch remove the deprecated functions as well as notice for
scheduler mode set/get API changes.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Move all bypass functions to ixgbe pmd and remove function
pointers from the eth_dev_ops struct.
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
TX coalescing waits for ETH_COALESCE_PKT_NUM packets to be coalesced
across bursts before transmitting them. For slow traffic, such as
100 PPS, this approach increases latency since packets are received
one at a time and tx coalescing has to wait for ETH_COALESCE_PKT
number of packets to arrive before transmitting.
To fix this:
- Update rx path to use status page instead and only receive packets
when either the ingress interrupt timer threshold (5 us) or
the ingress interrupt packet count threshold (32 packets) fires.
(i.e. whichever happens first).
- If number of packets coalesced is <= number of packets sent
by tx burst function, stop coalescing and transmit these packets
immediately.
Also added compile time option to favor throughput over latency by
default.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Add code to detect and run T6 devices. Update PCI ID Device table
with Chelsio T6 device ids and update documentation.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Update enic NIC guide, release notes and add flow API to the
supported features list.
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Nelson Escobar <neescoba@cisco.com>
Add template release notes for DPDK 17.08 with inline
comments and explanations of the various sections.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
The current crypto operation and symmetric crypto operation
structures will be reworked for correctness and improvement,
reducing also their sizes, to fit into less cache lines,
as stated in the following RFC:
http://dpdk.org/dev/patchwork/patch/24011/
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
API changes are planned for 17.08 to made sessions agnostic to the
underlaying devices, removing coupling with crypto PMDs, so a single
session can be used on multiple devices.
It requires to change "struct rte_cryptodev_sym_session" to store more
than one private data for devices, as well as remove redundant dev_id
and dev_type.
Effected public functions:
- rte_cryptodev_sym_session_pool_create
- rte_cryptodev_sym_session_create
- rte_cryptodev_sym_session_free
While session will not be directly associated with device, followed API
will be changed adding uint8_t dev_id to the argument list:
- rte_cryptodev_queue_pair_attach_sym_session
- rte_cryptodev_queue_pair_detach_sym_session
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Refer to RFC patch - cryptodev: remove crypto device type enumeration
It is planned to remove device type enumeration rte_cryptodev_type from
library to remove the coupling between crypto PMD and the librte_cryptodev.
In this case following stuctures will be changed: rte_cryptodev_session,
rte_cryptodev_sym_session, rte_cryptodev_info, rte_cryptodev.
It is planned to change the function rte_cryptodev_count_devtype().
The function prototype doesn’t clearly show the operation.
>From next release 17.08 the dev_type will be changed to driver_id.
So the function name will change to rte_cryptodev_device_count_by_driver().
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The following PMD names definitions will be moved to the individual PMDs
to remove the coupling between crypto PMDs and the librte_cryptodev:
CRYPTODEV_NAME_NULL_PMD
CRYPTODEV_NAME_AESNI_MB_PMD
CRYPTODEV_NAME_AESNI_GCM_PMD
CRYPTODEV_NAME_OPENSSL_PMD
CRYPTODEV_NAME_QAT_SYM_PMD
CRYPTODEV_NAME_SNOW3G_PMD
CRYPTODEV_NAME_KASUMI_PMD
CRYPTODEV_NAME_ZUC_PMD
CRYPTODEV_NAME_ARMV8_PMD
CRYPTODEV_NAME_SCHEDULER_PMD
CRYPTODEV_NAME_DPAA2_SEC_PMD
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Some work remains for VDEV bus move.
Not sure if there will be some API or ABI changes.
The notice is kept and postponed until the end of this rework.
The PCI fields must be removed from cryptodev and the newly
introduced eventdev, in order to complete the bus rework.
The VLAN flags rework should be completed in 17.08.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Some VFIO functions have been exported without any rename,
thus no breakage.
The struct eth_driver has been removed, but rte_pci_driver
is still used in rte_cryptodev_driver.
Fixes: a016873eb3 ("vfio: export utility functions in map file")
Fixes: 9dca21fb80 ("ethdev: remove ethdev driver")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The deprecation of the bypass functions in the ethdev has not been
done in 17.05. Let's postpone to 17.08.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The change of _rte_eth_dev_callback_process has not been done in 17.05.
Let's postpone to 17.08.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This is an ABI change notice for DPDK 17.08 in ethdev
about changes in rte_eth_txmode structure.
Currently Tx offloads are enabled by default, and can be disabled
using ETH_TXQ_FLAGS_NO* flags. This behaviour is not consistent with
the Rx side where the Rx offloads are disabled by default and enabled
according to bit field in rte_eth_rxmode structure.
The proposal is to disable the Tx offloads by default, and provide
a way for the application to enable them in rte_eth_txmode structure.
Besides of making the Tx configuration API more consistent for
applications, PMDs will be able to provide a better out of the
box performance.
Finally, as part of the work, the ETH_TXQ_FLAGS_NO* will
be superseded as well.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The PCI and virtual bus are planned to be moved to the generic
drivers/bus directory in v17.08. For this change to be possible, the EAL
must be made completely independent.
The rte_devargs structure currently holds device representation internal
to those two busses. It must be made generic before this work can be
completed.
Instead of using either a driver name for a vdev or a PCI address for a
PCI device, a devargs structure will have to be able to describe any
possible device on all busses, without introducing dependencies on
any bus-specific device representation. This will break the ABI for this
structure.
Additionally, an evolution will occur regarding the device parsing
from the command-line. A user must be able to set which bus will handle
which device, and this setting is integral to the definition of a
device.
The format has not yet been formally defined, but a proposition will
follow soon for a new command line parameter format for all devices.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Add tested Intel platforms with Intel NICs to the release note.
Signed-off-by: Yulong Pei <yulong.pei@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Because of UIO only support one interrupt, when insmod
``igb_uio`` and running l3fwd-power APP, link status
getting doesn't work properly.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Revert patches to provide clear view for
upcoming changes. Reverted patches are listed below:
commit ea85e7d711 ("ethdev: retrieve xstats by ID")
commit a954495245 ("ethdev: get xstats ID by name")
commit 1223608adb ("app/proc-info: support xstats by ID")
commit 25e38f09af ("net/e1000: support xstats by ID")
commit 923419333f ("net/ixgbe: support xstats by ID")
Signed-off-by: Kuba Kozak <kubax.kozak@intel.com>
The l2fwd-keepalive example has infinite processing loops and as a
result the only way to exit it is via SIGINT/SIGTERM (e.g. Control-C).
The resulting shutdown is unclean, which is fixed by adding a signal
handler that causes the processing loops to break.
Fixes: e64833f227 ("examples/l2fwd-keepalive: add sample application")
Signed-off-by: Remy Horton <remy.horton@intel.com>
Tested-by: Roman Korynkevych <romanx.korynkevych@intel.com>
Introduced new function: rte_eth_xstats_get_id_by_name
to retrieve xstats ids by its names.
doc: added release note
Signed-off-by: Kuba Kozak <kubax.kozak@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Extended xstats API in ethdev library to allow grouping of stats
logically so they can be retrieved per logical grouping managed
by the application.
Changed existing functions rte_eth_xstats_get_names and
rte_eth_xstats_get to use a new list of arguments: array of ids
and array of values. ABI versioning mechanism was used to
support backward compatibility.
Introduced two new functions rte_eth_xstats_get_all and
rte_eth_xstats_get_names_all which keeps functionality of the
previous ones (respectively rte_eth_xstats_get and
rte_eth_xstats_get_names) but use new API inside.
test-pmd: add support for new xstats API retrieving by id in
testpmd application: xstats_get() and
xstats_get_names() call with modified parameters.
doc: add description for modified xstats API
Documentation change for modified extended statistics API functions.
The old API only allows retrieval of *all* of the NIC statistics
at once. Given this requires a MMIO read PCI transaction per statistic
it is an inefficient way of retrieving just a few key statistics.
Often a monitoring agent only has an interest in a few key statistics,
and the old API forces wasting CPU time and PCIe bandwidth in retrieving
*all* statistics; even those that the application didn't explicitly
show an interest in.
The new, more flexible API allow retrieval of statistics per ID.
If a PMD wishes, it can be implemented to read just the required
NIC registers. As a result, the monitoring application no longer wastes
PCIe bandwidth and CPU time.
Signed-off-by: Jacek Piasecki <jacekx.piasecki@intel.com>
Signed-off-by: Kuba Kozak <kubax.kozak@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Some scheduling modes may need extra options to be configured,
this patch adds the function prototype for setting/getting
options.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
When insmod "igb_uio" with "intr_mode=legacy and test link
status interrupt. Since INTx interrupt is not supported by
X710/XL710/XXV710, it will cause Input/Output error when
reading file descriptor.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by Jingjing Wu <jingjing.wu@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This patch adds the NXP dpaa2 architecture and pmd details
in the Network interfaces section.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This patch deprecates the following functions in 17.05,
which will be removed in 17.08.
- rte_crpytodev_scheduler_mode_get()
- rte_crpytodev_scheduler_mode_set()
These two new functions replace them, fixing the typo in their names.
- rte_cryptodev_scheduler_mode_get()
- rte_cryptodev_scheduler_mode_set()
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
DOCSIS BPI mode is handled in the QAT PMD by sending full blocks to the
hardware device for encryption and using OpenSSL libcrypto for pre- or
post-processing of any partial blocks.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Adds support in OpenSSL PMD for algorithm following the DOCSIS
specification, which combines DES-CBC for full DES blocks (8 bytes)
and DES-CFB for last runt block (less than 8 bytes).
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Tested-by: Yang Gang <gangx.yang@intel.com>
Underlying IPSec Multi buffer library implements
DOCSIS specification, so this commit adds support
for this new feature, which combines AES-CBC for full
AES blocks (16 bytes) and AES-CFB for last runt block
(less than 16 bytes).
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Fail-over mode works with 2 slaves, primary slave and secondary slave.
In this mode, the scheduler will enqueue the incoming crypto op burst
to the primary slave. When one or more crypto ops are failed to be
enqueued, they then will be enqueued to the secondary slave.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Packet-size based distribution mode is a scheduling mode works with 2
slaves, primary slave and secondary slave, and distribute the enqueued
crypto ops to them based on their data lengths. A crypto op will be
distributed to the primary slave if its data length equals or bigger
than the designated threshold, otherwise it will be handled by the
secondary slave.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
HW based crypto drivers may only support limited number of
sessions per queue pair. This requires support for attaching
sessions to specific queue pair. New APIs are introduced to
attach/detach a session with/from a particular queue pair.
These are optional APIs.
Application can call attach API after creating a session
and can call detach API before deleting a session.
Application needs to check if max_nb_sessions_per_qp > 0,
then it should call the attach API.
max_nb_sessions_per_qp = 0 means infinite sessions per qp
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Remove DPDK QAT sample app, in favour of the newer applications
that use the cryptodev library: ipsec-gw and l2fwd-crypto,
which has support for Intel QuickAssist devices.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This patch changes the device configuration API for rte_cryptodev_ops
function prototype, and update all cryptodev PMDs for this change.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Add a library designed to calculate latency statistics and report them
to the application when queried. The library measures minimum, average and
maximum latencies, and jitter in nano seconds. The current implementation
supports global latency stats, i.e. per application stats.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Signed-off-by: Remy Horton <remy.horton@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
This patch adds a library that calculates peak and average data-rate
statistics. For ethernet devices. These statistics are reported using
the metrics library.
Signed-off-by: Remy Horton <remy.horton@intel.com>
This patch adds a new information metrics library. This Metrics
library implements a mechanism by which producers can publish
numeric information for later querying by consumers. Metrics
themselves are statistics that are not generated by PMDs, and
hence are not reported via ethdev extended statistics.
Metric information is populated using a push model, where
producers update the values contained within the metric
library by calling an update function on the relevant metrics.
Consumers receive metric information by querying the central
metric data, which is held in shared memory.
Signed-off-by: Remy Horton <remy.horton@intel.com>
The ring and distributor reworks are done.
Fixes: a6619414e0 ("ring: make struct and macros type agnostic")
Fixes: 775003ad2f ("distributor: add new burst-capable library")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
