- Include list of supported adapters.
- Include list of supported features.
- Document requirements for vector mode PMD.
- Remove obsolete limitation (scatter rx has been supported for
some time).
- Fixed broken links.
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
This commit removes the support of configuring the device E-switch
using TCF since it is now possible to configure it via DR (direct
verbs rules), and by that to also remove the PMD dependency in libmnl.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
This patch implements rx interrupts feature required for power
saving. These interrupts can be enabled/disabled on demand.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add MTU set operation and MTU update feature.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add device start operation and update the correct
function pointers for Rx and Tx burst functions.
This patch also update the octeontx2 NIC specific documentation.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Add vector version of packet Receive function.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Support setting up VLAN filters so as to allow tagged
packet's reception after VLAN HW Filter offload is enabled.
Signed-off-by: Vivek Sharma <viveksharma@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Support configuring VLAN offloads for an ethernet device and
dynamic promiscuous mode configuration for VLAN filters where
filters are updated according to promiscuous mode of the device.
Signed-off-by: Vivek Sharma <viveksharma@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add remaining PTP configuration/slowpath operations.
Timesync feature is available only for PF devices.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Signed-off-by: Zyta Szpak <zyta@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add flow control operations and exposed
otx2_nix_update_flow_ctrl_mode() to enable on the
configured mode in dev_start().
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Add Rx and Tx queue descriptor related operations.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
The fields from CQE needs to be converted to
ptype and rx ol flags in mbuf. This patch adds
create lookup memory for those items to be
used in Fastpath.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Add queue start and stop operations. Tx queue needs
to update the flow control value, Which will be
added in sub subsequent patch.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Add RSS support and expose RSS related functions
to implement RSS action for rte_flow driver.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Add unicast MAC filter for PF device and
update the respective feature list.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add promiscuous and allmulticast mode for PF devices and
update the respective feature list.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add basic stat operation and updated the feature list.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Add link stats related operations and mark respective
items in the documentation.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Add register dump support and mark Registers dump in features.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Adding bare minimum PMD library and doc build infrastructure
and claim the maintainership for octeontx2 PMD.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
In current implementation, an action which requires parameters
must accept them enclosed in a structure.
Some actions require a single, trivial type parameter, but it still
must be enclosed in a structure.
This obligation results in multiple, action-specific structures, each
containing a single trivial type parameter.
This patch introduces a new approach, allowing an action configuration
object of any type, trivial or a structure.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This patch implements additional actions of packet header
modifications.
Add actions:
- INC_TCP_SEQ - Increase sequence number in the outermost TCP header.
- DEC_TCP_SEQ - Decrease sequence number in the outermost TCP header.
- INC_TCP_ACK - Increase acknowledgment number in the outermost TCP
header.
- DEC_TCP_ACK - Decrease acknowledgment number in the outermost TCP
header.
Original work by Xiaoyu Min.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Add actions:
- INC_TCP_SEQ - Increase sequence number in the outermost TCP header.
- DEC_TCP_SEQ - Decrease sequence number in the outermost TCP header.
- INC_TCP_ACK - Increase acknowledgment number in the outermost TCP
header.
- DEC_TCP_ACK - Decrease acknowledgment number in the outermost TCP
header.
Original work by Xiaoyu Min.
This patch uses the new approach introduced by [1], using a new
macro ARG_ENTRY_HTON to pass a single integer argument to each of
the new actions.
[1] http://patches.dpdk.org/patch/55882/
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Add actions:
- INC_TCP_SEQ - Increase sequence number in the outermost TCP header.
- DEC_TCP_SEQ - Decrease sequence number in the outermost TCP header.
- INC_TCP_ACK - Increase acknowledgment number in the outermost TCP
header.
- DEC_TCP_ACK - Decrease acknowledgment number in the outermost TCP
header.
Original work by Xiaoyu Min.
This patch uses the new approach introduced by [1], using a simple
integer instead of using an action-specific structure for each of
the new actions.
[1] http://patches.dpdk.org/patch/55882/
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This feature was added in the following commit:
commit a3f5252e5cbd ("net/pcap: enable infinitely Rx a pcap file")
Signed-off-by: Cian Ferriter <cian.ferriter@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The latest versions of meson don't build targets when build_by_default is
false but install is true, unlike older versions. We can fix this by having
both build_by_default and install settings come from the build-time option.
Bugzilla ID: 303
Fixes: d02a2dab2dfb ("doc: support building HTML guides with meson")
Fixes: 720b14db3ae2 ("build: generate API documentation with meson")
Cc: stable@dpdk.org
Reported-by: Ali Alnubani <alialnu@mellanox.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Now that everything that has ever accessed the shared memory
config is doing so through the public API's, we can make it
internal. Since we're removing quite a few headers from
rte_eal_memconfig.h, we need to add them back in places
where this header is used.
This bumps the ABI, so also change all build files and make
update documentation.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: David Marchand <david.marchand@redhat.com>
Enable an example for rawdev ntb. Support interactive mode to send
file on one host and receive file from another host. The command line
would be 'send [filepath]' and 'receive [filepath]'.
But since the FIFO is not enabled right now, use rte_memcpy as the enqueue
and dequeue functions and only support transmitting file no more than 4M.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Add handshake process using doorbell so that two hosts can
communicate to start and stop.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Add in the list of registers for the device.
And enable NTB device ops for Intel Skylake platform.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Introduce rawdev driver support for NTB (Non-transparent Bridge) which
can help to connect two separate hosts with each other.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Update the devbind script with new section of DMA devices, also
added OCTEONTX2 DMA device ID to DMA device list
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Sample test to verify DMA functionality, this test covers
internal transfer mode.
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Register dev_configure API to configure DPI PCI devices.
After successful initialization send message to PF to open
corresponding DPI DMA queue. At present hardware doesn't
support mail box for DPI, so PMD to PF communication uses
pre build kernel devfs.
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Add the make and meson based build infrastructure along
with the DMA device probe with documentation infrastructure.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
The mempool library assigns handler ops indexes based on the dynamic load
order of mempool handlers. Indexes are used so a mempool can be used by
multiple processes, but this only works if all processes agree on the
mapping from index to mempool handler.
When using the '-d' argument, it's possible for different processes to load
mempool handlers in different orders, and thus have different
index->handler mappings. Using a mempool in multiple of such processes will
result in undefined behavior.
This commit adds a note to the mempool library programmer's guide warning
users against this.
Fixes: 449c49b93a6b ("mempool: support handler operations")
Cc: stable@dpdk.org
Signed-off-by: Gage Eads <gage.eads@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
