pause_sbt(). This allows pause() to continue working during a panic()
which is not invoking KDB. This is useful when debugging graphics
drivers using the LinuxKPI.
Obtained from: kmacy @
MFC after: 1 week
It does not belong to the vmbus.
While I'm here rework the Hypercall setup, e.g. use busdma(9)
and avoid bit fields.
Discussed with: Jun Su <junsu microsoft com>
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D6445
The variable "size" stores number of words (4bytes). But the loop over
memory uses size as number of bytes to scan memory. As result it fetches
only 1/4th of memory.
This patch solves this problem and nvram2env fetches all NVRAM variables.
Test plan:
Pre-requisites: any MIPS board with ASCII-based NVRAM mapped into memory
* Add "device nvram2env" into kernel configuration
* Specify hints: base is mandatory (according to nvram2env(4))
hint.nvram.0.base=0x1c7f8000 (it's valid address for Asus RT-N53 with
flags = 0x4)
* Build & load kernel with bootverbose
Actual result: only part of nvram variables are found
Expected result: all variables are found
Submitted by: Michael Zhilin <mizhka@gmail.com>
Differential Revision: https://reviews.freebsd.org/D6466
This adds a BHND_BUS_GET_ATTACH_TYPE(); the primary use-case is to let
chipc make a coarse-grained determination as to whether UART, SPI, etc
drivers ought to be attached, and on fullmac devices, whether a real
CPU driver ought to be skipped for the ARM core, etc.
Tested:
* BCM4331 (BHND)
* BCM4312 (SIBA)
Submitted by: Landon Fuller <landonf@landonf.org>
Differential Revision: https://reviews.freebsd.org/D6492
This diff updates DEFINE_CLASS_2/_3 to support the specification of class
name separately from the class variable name, bringing them into sync
with their API documentation, as well as the behavior of DEFINE_CLASS_0/_1.
Nothing in the tree currently uses the _2/_3 variants, and I can't
find any references to the API outside of commits to the kobj.h
header itself; given the limitation that currently exists, I'd
be surprised if they've ever been used.
Submitted by: Landon Fuller <landonf@landonf.org>
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D6491
Override global retry limit (which is set in R92C_RL) via per-frame
TX descriptor field. Obsoletes D3840 (should work better with 2+ vaps).
Tested with RTL8188EU and RTL8192CUS in STA mode (maxretry = [3-9]).
- Revert the change for seed(0) in r300384. I misunderstood the standard
and while our random() implementation in libkern may be improved, it
handles the seed(0) case fine.
Pointed out by: bde, ache
After r285994, sysctl(8) was fixed to use 273.15 instead of 273.20 as 0C
reference and as result, the temperature read in sysctl(8) now exibits a
+0.1C difference.
This commit fix the kernel references to match the reference value used in
sysctl(8) after r285994.
Sponsored by: Rubicon Communications (Netgate)
The GPIO hardware should not be owned by a single device, this defeats any
chance of use of the GPIO controller as an interrupt source.
ow(4) is now the only consumer of this 'feature' before we can remove it
for good.
Discussed with: ian, bsdimp
- Revert r300377: The implementation claims to return a value
within the range. [1]
- Adjust the value for the case of a zero seed, whihc according
to standards should be equivalent to a seed of value 1.
Pointed out by: cem
wpa_supplicant(8) expects to see 'scan complete' event after every
scan command; in case, when event is not sent it will hang for
indefinite time.
PR: 209198
the current offset (spelled: "fs.pindex") until it is known whether a
backing object exists. In fact, if not for the fact that the backing
object offset is zero when there is no backing object, this update would
produce a broken offset.
Reviewed by: kib
This is a long standing problem: our random() function returns an
unsigned integer but the rand provided by ndis(4) returns an int.
Scale it down.
MFC after: 2 weeks
In ndis(4) we expose a rand() function that was constantly reseeding
with a time depending function every time it was called. This
essentially broke the reasoning behind seeding, and rendered srand()
a no-op.
Keep it simple, just use random() and srandom() as it's meant to work.
It would have been tempting to just go for arc4random() but we
want to mimic Microsoft, and we don't need crypto-grade randomness
here.
PR: 209616
MFC after: 2 weeks
compilers can emit arm instructions that require 8-byte alignment. The
alignment-sensitive instructions were added in armv5, which has to be
supported by our combined v4/v5 kernels, so the value is set uncoditionally
for all arm architecture versions.
Also adjust the comment to explain in more detail why the macros have the
form and values they do.
Per advice from bde@, maintain the unsignedness of the value of _ALIGNBYTES
(but do so using his second choice of allowing sizeof() to supply the
unsignedness, rather than just hardcoding '8U', which in my mind would
require an even more verbose comment to explain why it's right). Also
explain in the comment that the resulting type of _ALIGN() is equivelent
to uinptr_t on arm (32-bit unsigned int), but it's purposely spelled as
"unsigned" to avoid problems with including other header files. Even
including machine/_types.h to allow use of __uintptr_t causes compilation
failures because of this header being included (indirectly) in asm code.
The discussion that led to this change (albeit at a glacial pace) is at
https://lists.freebsd.org/pipermail/svn-src-head/2014-November/064593.html
volumes. Treat the field as a semaphore protecting availability of
the device for mounting. Do no access devvp->v_rdev without the vnode
lock owned.
Protect change of the devvp->v_bufobj bo_ops vector with the vnode
lock.
Reviewed by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
This is the same problem as r290629. With META_MODE we do not generate
.depend files, so there is no proper dependency to lookup. Guessed
dependencies must be used. If this proves to be a problem then we will
have to generate and use .depend files even with META_MODE.
Sponsored by: EMC / Isilon Storage Division
sglist_count_vmpages() determines the number of segments required for
a buffer described by an array of VM pages. sglist_append_vmpages()
adds the segments described by such a buffer to an sglist. The latter
function is largely pulled from sglist_append_bio(), and
sglist_append_bio() now uses sglist_append_vmpages().
Reviewed by: kib
Sponsored by: Chelsio Communications
Add implementations of bus_map/unmap_resource to the x86 nexus driver.
Change bus_activate/deactivate_resource to honor RF_UNMAPPED and to
use bus_map/unmap_resource to create/destroy the implicit mapping when
RF_UNMAPPED is not set.
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D5237
Add a pair of bus methods that can be used to "map" resources for direct
CPU access using bus_space(9). bus_map_resource() creates a mapping and
bus_unmap_resource() releases a previously created mapping. Mappings are
described by 'struct resource_map' object. Pointers to these objects can
be passed as the first argument to the bus_space wrapper API used for bus
resources.
Drivers that wish to map all of a resource using default settings
(for example, using uncacheable memory attributes) do not need to change.
However, drivers that wish to use non-default settings can now do so
without jumping through hoops.
First, an RF_UNMAPPED flag is added to request that a resource is not
implicitly mapped with the default settings when it is activated. This
permits other activation steps (such as enabling I/O or memory decoding
in a device's PCI command register) to be taken without creating a
mapping. Right now the AGP drivers don't set RF_ACTIVE to avoid using
up a large amount of KVA to map the AGP aperture on 32-bit platforms.
Once RF_UNMAPPED is supported on all platforms that support AGP this
can be changed to using RF_UNMAPPED with RF_ACTIVE instead.
Second, bus_map_resource accepts an optional structure that defines
additional settings for a given mapping.
For example, a driver can now request to map only a subset of a resource
instead of the entire range. The AGP driver could also use this to only
map the first page of the aperture (IIRC, it calls pmap_mapdev() directly
to map the first page currently). I will also eventually change the
PCI-PCI bridge driver to request mappings of the subset of the I/O window
resource on its parent side to create mappings for child devices rather
than passing child resources directly up to nexus to be mapped. This
also permits bridges that do address translation to request suitable
mappings from a resource on the "upper" side of the bus when mapping
resources on the "lower" side of the bus.
Another attribute that can be specified is an alternate memory attribute
for memory-mapped resources. This can be used to request a
Write-Combining mapping of a PCI BAR in an MI fashion. (Currently the
drivers that do this call pmap_change_attr() directly for x86 only.)
Note that this commit only adds the MI framework. Each platform needs
to add support for handling RF_UNMAPPED and thew new
bus_map/unmap_resource methods. Generally speaking, any drivers that
are calling rman_set_bustag() and rman_set_bushandle() need to be
updated.
Discussed on: arch
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D5237
We were inconsistent about the use of time_second vs. time_uptime.
Always use time_uptime so the value can be meaningfully compared.
Submitted by: "Max" <maximos@als.nnov.ru>
MFC after: 4 days
Specification, Version 2, but marked as legacy, and have been removed from
later specifications. After 12 years it is time to remove them from new
architectures when the main use for sbrk is an invalid method to attempt
to find how much memory has been allocated from malloc.
There are a few places in the tree that still call sbrk, however they are
not used on arm64. They will need to be fixed to cross build from arm64,
but these will be fixed in a follow up commit.
Old copies of binutils from ports called into sbrk, however this has been
fixed around 6 weeks ago. It is advised to update binutils on arm64 before
installing a world that includes this change.
Reviewed by: brooks, emaste
Obtained from: brooks
Relnotes: yes
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D6464
Fix panics which were present when BGX and PF module were unloaded.
Reviewed by: zbb
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D6346
Add directory structure and fix dependencies to be able to
build and use Cavium VNIC driver as a module.
Reviewed by: zbb
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D6345
utilizing previously unused arg field of struct ccb_notify_acknowledge.
This makes new QUERY TASK, QUERY TASK SET and QUERY ASYNC EVENT requests
really functional for CAM target mode drivers.
tested on the Pass 1.1 and 2.0 ThunderX machines in the Netperf cluster.
Reviewed by: jhb
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6453
outlived their usefulness. This allows to remove drop/pickup Giant
wrappers around GEOM calls.
Discussed with: alfred, imp, phk
Sponsored by: The FreeBSD Foundation
Store the last doorbell write in the mlx5e_sq structure and write the
doorbell to the hardware when the transmit routine finishes
transmitting all queued mbufs.
Sponsored by: Mellanox Technologies
Tested by: Netflix
MFC after: 1 week
This patch implements a sysctl which allows setting a factor, N, for
how many work queue elements can be generated before requiring a
completion event. When a completion event happens the code simulates N
completion events instead of only one. When draining a transmit queue,
N-1 NOPs are transmitted at most, to force generation of the final
completion event. Further a timer is running every HZ ticks to flush
any remaining data off the transmit queue when the tx_completion_fact
> 1.
The goal of this feature is to reduce the PCI bandwidth needed when
transmitting data.
Sponsored by: Mellanox Technologies
Tested by: Netflix
MFC after: 1 week
ip_frag tuneables aren't registered in the ipf_tuners linked list.
This commmit enables the two existing ip_frag tuneables by registering
them.
MFC after: 1 month
Also check the return value of copyin(9) to prevent unnecessary allocation in the failure case.
Submitted by: ngie
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D5155
Replace all rounding with the round{up,down}2 macros
a missing set of braces caused the previous code to be incorrect
replace alloca() with malloc() because alloca() can return an allocation
that is actually invalid, causing boot to fail
Reviewed by: emaste, ed
Thanks To: peter
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D6213
This patch introduces support of BHND on SoC: nexus-to-bhnd drivers.
bhnd_soc is attached under nexus and responsible for all BHND-style calls
from bhnd(4) bus to parents.
bcma_nexus is bhnd(4) bus, attached to bhnd_soc and implement all
nexus-style behaviour of BHND.
Submitted by: Michael Zhilin <mizhka@gmail.com>
Reviewed by: Landon Fuller <landonf@landonf.org>
Differential Revision: https://reviews.freebsd.org/D6248
Adds support for adjusting active bus resource allocations, limiting the
range to the constraints of the register window within which the resource
is mapped.
This is the final set of bhnd changes required to support delegating
ChipCommon's register space to child devices.
Submitted by: Landon Fuller <landonf@landonf.org>
Differential Revision: https://reviews.freebsd.org/D6470
This adds bhnd-compatible implementations of bus_(read|write|set)_(1|2|4) APIs,
and upgrades the SPROM parsing code to use bhnd_bus_read_region_stream_2().
This a precursor to bridge support for resource adjustment and the new
ChipCommon bus support.
Tested:
* Tested against BCM4331
* Kernel build verified via tinderbox.
Submitted by: Landon Fuller <landonf@landonf.org>
Differential Revision: https://reviews.freebsd.org/D6469
- Add a pcib_detach() function for the PCI-PCI bridge driver. It
tears down the NEW_PCIB and hotplug state including destroying
resource managers, deleting child devices, and disabling hotplug
events.
- Add a detach method to the ACPI PCI-PCI bridge driver which calls
pcib_detach() and then frees the copy of the _PRT interrupt routing
table.
- Add a detach method to the PCI-Cardbus bridge driver which frees
the PCI bus resources in addition to calling cbb_detach().
- Explicitly clear any pending hotplug events during attach to ensure
future events will generate an interrupt.
- If a the Command Completed bit is set in the slot status register
when the command completion timeout fires, treat it as if the
command completed and the completion interrupt was just lost rather
than forcing a detach.
- Don't wait for a Command Completed notification if Command Completion
interrupts are disabled. The spec explicitly says no interrupt is
enabled when clearing CCIE, and on my T400 no interrupt is generated
when CCIE is changed from cleared to set, either. In addition, the
T400 doesn't appear to set the Command Completed bit in the cases
where it doesn't generate an interrupt, so don't schedule the timer
either. (If the CC bit were always set, one could always set the timer
and rely on the logic of treating CC set as a missed interrupt.)
Reviewed by: imp (older version)
Differential Revision: https://reviews.freebsd.org/D6424
Split getchannels() method in ath_hal/ah_regdomain.c into a subset
of functions for better readability.
Note: due to different internal structure, it cannot use
ieee80211_add_channel*() (however, some parts are done in a
similar manner).
Differential Revision: https://reviews.freebsd.org/D6139
control to a three way setting.
0 - Totally disable ECN. (no change)
1 - Enable ECN if incoming connections request it. Outgoing
connections will request ECN. (no change from present != 0 setting)
2 - Enable ECN if incoming connections request it. Outgoing
conections will not request ECN.
Change the default value of net.inet.tcp.ecn.enable from 0 to 2.
Linux version 2.4.20 and newer, Solaris, and Mac OS X 10.5 and newer have
similar capabilities. The actual values above match Linux, and the default
matches the current Linux default.
Reviewed by: eadler
MFC after: 1 month
MFH: yes
Sponsored by: https://reviews.freebsd.org/D6386
Do not try to start a scan when interface is not running.
How-to-reproduce:
1) ifconfig wlan0 create wlandev urtwn0
2) wlandebug -i wlan0 state
3) ifconfig wlan0 scan
ieee80211.c:
add_chanlist(): 'error' variable will be uninitialized if
no channels were passed; return '0' instead.
ieee80211_action.c:
ieee80211_send_action_register(): drop 'break' after 'return'.
ieee80211_crypto_none.c:
none_encap(): 'keyid' is not used in non-debug builds; hide it
behind IEEE80211_DEBUG ifdef.
ieee80211_freebsd.c:
Staticize global 'ieee80211_debug' variable (used only in this
file).
ieee80211_hostap.c:
Fix a comment (associatio -> association).
ieee80211_ht.c:
ieee80211_setup_htrates(): initialize 'maxunequalmcs' to 0 to mute
compiler warning.
ieee80211_hwmp.c:
hwmp_recv_preq(): copy 'prep' between conditional blocks to fix
-Wshadow warning.
ieee80211_mesh.c:
mesh_newstate(): remove duplicate 'ni' definition.
mesh_recv_group_data(): fix -Wempty-body warning in non-debug
builds.
ieee80211_phy.c:
ieee80211_compute_duration(): remove 'break' after panic() call.
ieee80211_scan_sta.c:
Hide some TDMA-specific macros under IEEE80211_SUPPORT_TDMA ifdef
adhoc_pick_bss(): remove 'ic' pointer redefinition.
ieee80211_sta.c:
sta_beacon_miss(): remove 'ic' pointer redefinition.
ieee80211_superg.c:
superg_ioctl_set80211(): drop unreachable return.
Tested with clang 3.8.0, gcc 4.6.4 and gcc 5.3.0.
SHF_COMPRESSED section contains compressed data
DT_TLSDESC_PLT Location of PLT entry for TLS descriptor resolver calls
DT_TLSDESC_GOT Location of GOT entry used by resolver PLT entry
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
cleanup consists of fixes to comments. However, there is one change to
code: Remove special-case handling of errors involving the kernel map.
We do not perform I/O on the kernel map, so there is no need for this
special case.
Reviewed by: kib (an earlier version)
pq_vcnt, as a count of real things, has no business being negative. It is only
ever initialized by a u_int counter.
The warning came from the atomic_add_int() in vm_pagequeue_cnt_add().
Rectify the warning by changing the variable to u_int. No functional change.
Suggested by: Clang 3.3
Sponsored by: EMC / Isilon Storage Division
This code was originally implemented 7 years ago, but never really worked
due to trivial error. I think this functionality may be not required.
Initiators supporting optional periodic command status checks detected
those terminated commands and retried them 3 seconds later. But thinking
about less featured initiators and the fact that it is our race makes
virtual ports "unknown" it may be good to have this feature.
Frankly, it doesn't make sense for vm_pageout_wakeup_thresh to have a negative
value (it is only ever set to a fraction of v_free_min, which is unsigned and
also obviously non-negative). But I'm not going to try and convert every
non-negative scalar in the VM to unsigned today, so just cast it for the
comparison.
Submitted by: Clang 3.3
Sponsored by: EMC / Isilon Storage Division
This change includes support for SCSI SMR drives (which conform to the
Zoned Block Commands or ZBC spec) and ATA SMR drives (which conform to
the Zoned ATA Command Set or ZAC spec) behind SAS expanders.
This includes full management support through the GEOM BIO interface, and
through a new userland utility, zonectl(8), and through camcontrol(8).
This is now ready for filesystems to use to detect and manage zoned drives.
(There is no work in progress that I know of to use this for ZFS or UFS, if
anyone is interested, let me know and I may have some suggestions.)
Also, improve ATA command passthrough and dispatch support, both via ATA
and ATA passthrough over SCSI.
Also, add support to camcontrol(8) for the ATA Extended Power Conditions
feature set. You can now manage ATA device power states, and set various
idle time thresholds for a drive to enter lower power states.
Note that this change cannot be MFCed in full, because it depends on
changes to the struct bio API that break compatilibity. In order to
avoid breaking the stable API, only changes that don't touch or depend on
the struct bio changes can be merged. For example, the camcontrol(8)
changes don't depend on the new bio API, but zonectl(8) and the probe
changes to the da(4) and ada(4) drivers do depend on it.
Also note that the SMR changes have not yet been tested with an actual
SCSI ZBC device, or a SCSI to ATA translation layer (SAT) that supports
ZBC to ZAC translation. I have not yet gotten a suitable drive or SAT
layer, so any testing help would be appreciated. These changes have been
tested with Seagate Host Aware SATA drives attached to both SAS and SATA
controllers. Also, I do not have any SATA Host Managed devices, and I
suspect that it may take additional (hopefully minor) changes to support
them.
Thanks to Seagate for supplying the test hardware and answering questions.
sbin/camcontrol/Makefile:
Add epc.c and zone.c.
sbin/camcontrol/camcontrol.8:
Document the zone and epc subcommands.
sbin/camcontrol/camcontrol.c:
Add the zone and epc subcommands.
Add auxiliary register support to build_ata_cmd(). Make sure to
set the CAM_ATAIO_NEEDRESULT, CAM_ATAIO_DMA, and CAM_ATAIO_FPDMA
flags as appropriate for ATA commands.
Add a new get_ata_status() function to parse ATA result from SCSI
sense descriptors (for ATA passthrough over SCSI) and ATA I/O
requests.
sbin/camcontrol/camcontrol.h:
Update the build_ata_cmd() prototype
Add get_ata_status(), zone(), and epc().
sbin/camcontrol/epc.c:
Support for ATA Extended Power Conditions features. This includes
support for all features documented in the ACS-4 Revision 12
specification from t13.org (dated February 18, 2016).
The EPC feature set allows putting a drive into a power power mode
immediately, or setting timeouts so that the drive will
automatically enter progressively lower power states after various
idle times.
sbin/camcontrol/fwdownload.c:
Update the firmware download code for the new build_ata_cmd()
arguments.
sbin/camcontrol/zone.c:
Implement support for Shingled Magnetic Recording (SMR) drives
via SCSI Zoned Block Commands (ZBC) and ATA Zoned Device ATA
Command Set (ZAC).
These specs were developed in concert, and are functionally
identical. The primary differences are due to SCSI and ATA
differences. (SCSI is big endian, ATA is little endian, for
example.)
This includes support for all commands defined in the ZBC and
ZAC specs.
sys/cam/ata/ata_all.c:
Decode a number of additional ATA command names in ata_op_string().
Add a new CCB building function, ata_read_log().
Add ata_zac_mgmt_in() and ata_zac_mgmt_out() CCB building
functions. These support both DMA and NCQ encapsulation.
sys/cam/ata/ata_all.h:
Add prototypes for ata_read_log(), ata_zac_mgmt_out(), and
ata_zac_mgmt_in().
sys/cam/ata/ata_da.c:
Revamp the ada(4) driver to support zoned devices.
Add four new probe states to gather information needed for zone
support.
Add a new adasetflags() function to avoid duplication of large
blocks of flag setting between the async handler and register
functions.
Add new sysctl variables that describe zone support and paramters.
Add support for the new BIO_ZONE bio, and all of its subcommands:
DISK_ZONE_OPEN, DISK_ZONE_CLOSE, DISK_ZONE_FINISH, DISK_ZONE_RWP,
DISK_ZONE_REPORT_ZONES, and DISK_ZONE_GET_PARAMS.
sys/cam/scsi/scsi_all.c:
Add command descriptions for the ZBC IN/OUT commands.
Add descriptions for ZBC Host Managed devices.
Add a new function, scsi_ata_pass() to do ATA passthrough over
SCSI. This will eventually replace scsi_ata_pass_16() -- it
can create the 12, 16, and 32-byte variants of the ATA
PASS-THROUGH command, and supports setting all of the
registers defined as of SAT-4, Revision 5 (March 11, 2016).
Change scsi_ata_identify() to use scsi_ata_pass() instead of
scsi_ata_pass_16().
Add a new scsi_ata_read_log() function to facilitate reading
ATA logs via SCSI.
sys/cam/scsi/scsi_all.h:
Add the new ATA PASS-THROUGH(32) command CDB. Add extended and
variable CDB opcodes.
Add Zoned Block Device Characteristics VPD page.
Add ATA Return SCSI sense descriptor.
Add prototypes for scsi_ata_read_log() and scsi_ata_pass().
sys/cam/scsi/scsi_da.c:
Revamp the da(4) driver to support zoned devices.
Add five new probe states, four of which are needed for ATA
devices.
Add five new sysctl variables that describe zone support and
parameters.
The da(4) driver supports SCSI ZBC devices, as well as ATA ZAC
devices when they are attached via a SCSI to ATA Translation (SAT)
layer. Since ZBC -> ZAC translation is a new feature in the T10
SAT-4 spec, most SATA drives will be supported via ATA commands
sent via the SCSI ATA PASS-THROUGH command. The da(4) driver will
prefer the ZBC interface, if it is available, for performance
reasons, but will use the ATA PASS-THROUGH interface to the ZAC
command set if the SAT layer doesn't support translation yet.
As I mentioned above, ZBC command support is untested.
Add support for the new BIO_ZONE bio, and all of its subcommands:
DISK_ZONE_OPEN, DISK_ZONE_CLOSE, DISK_ZONE_FINISH, DISK_ZONE_RWP,
DISK_ZONE_REPORT_ZONES, and DISK_ZONE_GET_PARAMS.
Add scsi_zbc_in() and scsi_zbc_out() CCB building functions.
Add scsi_ata_zac_mgmt_out() and scsi_ata_zac_mgmt_in() CCB/CDB
building functions. Note that these have return values, unlike
almost all other CCB building functions in CAM. The reason is
that they can fail, depending upon the particular combination
of input parameters. The primary failure case is if the user
wants NCQ, but fails to specify additional CDB storage. NCQ
requires using the 32-byte version of the SCSI ATA PASS-THROUGH
command, and the current CAM CDB size is 16 bytes.
sys/cam/scsi/scsi_da.h:
Add ZBC IN and ZBC OUT CDBs and opcodes.
Add SCSI Report Zones data structures.
Add scsi_zbc_in(), scsi_zbc_out(), scsi_ata_zac_mgmt_out(), and
scsi_ata_zac_mgmt_in() prototypes.
sys/dev/ahci/ahci.c:
Fix SEND / RECEIVE FPDMA QUEUED in the ahci(4) driver.
ahci_setup_fis() previously set the top bits of the sector count
register in the FIS to 0 for FPDMA commands. This is okay for
read and write, because the PRIO field is in the only thing in
those bits, and we don't implement that further up the stack.
But, for SEND and RECEIVE FPDMA QUEUED, the subcommand is in that
byte, so it needs to be transmitted to the drive.
In ahci_setup_fis(), always set the the top 8 bits of the
sector count register. We need it in both the standard
and NCQ / FPDMA cases.
sys/geom/eli/g_eli.c:
Pass BIO_ZONE commands through the GELI class.
sys/geom/geom.h:
Add g_io_zonecmd() prototype.
sys/geom/geom_dev.c:
Add new DIOCZONECMD ioctl, which allows sending zone commands to
disks.
sys/geom/geom_disk.c:
Add support for BIO_ZONE commands.
sys/geom/geom_disk.h:
Add a new flag, DISKFLAG_CANZONE, that indicates that a given
GEOM disk client can handle BIO_ZONE commands.
sys/geom/geom_io.c:
Add a new function, g_io_zonecmd(), that handles execution of
BIO_ZONE commands.
Add permissions check for BIO_ZONE commands.
Add command decoding for BIO_ZONE commands.
sys/geom/geom_subr.c:
Add DDB command decoding for BIO_ZONE commands.
sys/kern/subr_devstat.c:
Record statistics for REPORT ZONES commands. Note that the
number of bytes transferred for REPORT ZONES won't quite match
what is received from the harware. This is because we're
necessarily counting bytes coming from the da(4) / ada(4) drivers,
which are using the disk_zone.h interface to communicate up
the stack. The structure sizes it uses are slightly different
than the SCSI and ATA structure sizes.
sys/sys/ata.h:
Add many bit and structure definitions for ZAC, NCQ, and EPC
command support.
sys/sys/bio.h:
Convert the bio_cmd field to a straight enumeration. This will
yield more space for additional commands in the future. After
change r297955 and other related changes, this is now possible.
Converting to an enumeration will also prevent use as a bitmask
in the future.
sys/sys/disk.h:
Define the DIOCZONECMD ioctl.
sys/sys/disk_zone.h:
Add a new API for managing zoned disks. This is very close to
the SCSI ZBC and ATA ZAC standards, but uses integers in native
byte order instead of big endian (SCSI) or little endian (ATA)
byte arrays.
This is intended to offer to the complete feature set of the ZBC
and ZAC disk management without requiring the application developer
to include SCSI or ATA headers. We also use one set of headers
for ioctl consumers and kernel bio-level consumers.
sys/sys/param.h:
Bump __FreeBSD_version for sys/bio.h command changes, and inclusion
of SMR support.
usr.sbin/Makefile:
Add the zonectl utility.
usr.sbin/diskinfo/diskinfo.c
Add disk zoning capability to the 'diskinfo -v' output.
usr.sbin/zonectl/Makefile:
Add zonectl makefile.
usr.sbin/zonectl/zonectl.8
zonectl(8) man page.
usr.sbin/zonectl/zonectl.c
The zonectl(8) utility. This allows managing SCSI or ATA zoned
disks via the disk_zone.h API. You can report zones, reset write
pointers, get parameters, etc.
Sponsored by: Spectra Logic
Differential Revision: https://reviews.freebsd.org/D6147
Reviewed by: wblock (documentation)
from mbuf when calculating path mtu. Remove now unused finaldst variable.
Also constify dst argument in ip6_getpmtu() and ip6_getpmtu_ctl().
Reviewed by: melifaro
Obtained from: Yandex LLC
Sponsored by: Yandex LLC
Add more 'compatible' strings found in various LEDE DTS files.
Reviewed by: adrian
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D6432
That pops up in the rev 5xx / 6xx microcode on the later cores
(4312, 4322.) I'm not sure why this is happening yet and I'll
dig into it, but Linux b43 does the same thing.
* PMU controls the clock setup
* Correctly set idle low power handling
* Use a hard-coded powerup delay for some of the newer hardware
(including the BCM4322, which I've tested with.)
Tested:
* BCM4322, 2G + 5G STA mode
Obtained from: Linux b43 (PMU behaviour)
on a fuse mounted file system, it will crash. Although it may be
possible to make this work correctly, this patch avoids the crash
in the meantime.
I removed the MPASS(), since panicing for the FIFO case didn't make
a lot of sense when it returns an error for the others.
PR: 195000
Submitted by: henry.hu.sh@gmail.com (earlier version)
MFC after: 2 weeks
function in vnet.c move it to if.c where it logically belongs and put
it under a VNET_SYSUNINIT() call.
To not change the current behaviour make sure it runs first thing
during teardown. In the future this will allow us more flexibility
on changing the order on when we want to get rid of interfaces.
Stop exporting if_vmove() and make it file static.
Reviewed by: gnn
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6438
While looking at r300073, I noticed these incorrect comments in the context
of the diff.
Reviewed by: imp, jhb
Differential Revision: https://reviews.freebsd.org/D6431
This is set to the SI_SUB_* value before executing any VNET_SYSINIT
or VNET_SYSUNINT. While good for debugging especially VNET teardown
problems having a chance to know at which level during teardown we are,
it will also be used to identify to detcted a "stable state"
(as in fully up and running) later on.
Obtained from: projects/vnet
Sponsored by: The FreeBSD Foundation
needed in later changes where we may not be able to lock the pic list lock
to perform a lookup, e.g. from within interrupt context.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
into dyn_update_proto_state(). This allows eliminate the second state
lookup in the ipfw_install_state().
Also remove MATCH_* macros, they are defined in ip_fw_private.h as enum.
Obtained from: Yandex LLC
Sponsored by: Yandex LLC
opened in O_SYNC mode, at least for UFS. This also handles
truncation, done due to the O_SYNC | O_TRUNC flags combination to
open(2), in synchronous way.
Noted by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Allow to deallocate previously allocated ITS device along with
its interrupts. Interrupt numbers are being freed when the last
LPI number is no longer busy.
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D6351
That was both redundant as zfs_znode_sa_init() already does the job and
insufficient as the root vnode can be reached via other means.
MFC after: 1 weeks
gfs code is (almsot) completely agnostic of FreeBSD VFS locking, so it
does not handle doomed but not yet dead vnodes and may return them.
Check for those vnodes here and retry a lookup.
Note that ZFS and gfs have additional protections that ensure that a
parent vnode of the current vnode is never doomed.
The fixed problem is an occasional failure to lookup a 'snapshot' or
'shares' directories under .zfs.
Note that for the above reason all uses of zfsctl_root_lookup() are
better be replaced with VOP_LOOKUP.
MFC after: 5 weeks
I transcribed the linux ssb offsets and .. didn't pick up that our SIBA
SPROM code has an offset of 0x1000.
This fixes a bunch of odd parsing values that showed up when I tried
using a newer NIC. The NIC still doesn't yet work but now the SPROM
values are right.
Oops!
return value when it could return 1 (indicating we should stop).
Fix a few instances of pager_open() / pager_close() not being called.
Actually use these routines for the environment variable printing code
I just committed.
a slightly non-standard %S that's more useful in the UEFI environment,
so ignore printf errors. There's no good cast to use. We'll need to
revisit this in the future.
* Add the new TX/RX frame formats;
* Use the right TX/RX format based on the frame info;
* Disable the 5xx firmware check, since now it should
somewhat work (but note, we don't yet use it unless
you manually add ucode11/initvals11 from the 5.x driver
to bwn-kmod-firmware;
* Misc: update some comments/debugging now I know what's
actually going on.
Tested:
* BCM4321MC, STA mode, both 4xx and 666 firmware, DMA mode
TODO:
* The newer firmware ends up logging "warn: firmware state (0)";
not sure yet what's going on there. But, yes, it still works.
I'm committing this via a BCM4321MC, 11a station, firmware
rev 666.
Obtained from: Linux b43 (TX/RX descriptor format for 5xx)
"iflib is a library to eliminate the need for frequently duplicated device
independent logic propagated (poorly) across many network drivers."
Participation is purely optional. The IFLIB kernel config option is
provided for drivers that want to transition between legacy and iflib
modes of operation. ixl and ixgbe driver conversions will be committed
shortly. We hope to see participation from the Broadcom and maybe
Chelsio drivers in the near future.
Submitted by: mmacy@nextbsd.org
Reviewed by: gallatin
Differential Revision: D5211
- Avoid a conditional branch on the return value of sleepq_resume_thread()
by ORing its return value into the boolean wakeup_swapper. This is
consistent with other sleepqueue functions which just pass this return
value to their caller.
- sleepq_resume_thread() unconditionally removes the thread from its queue,
so there's no need to maintain a pointer to the next element in the queue.
MFC after: 2 weeks
It has no counterpart among the other lock primitives and has been a
no-op for years. Mutex consistency checks are generally done whenver
INVARIANTS is enabled.
Greatly reduce the locked instructions and reduce number of inner loops.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D6404
Use vmbus softc to save vmbus per-cpu data. More stuffs will be moved
into vmbus softc.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D6403
And move base channel id calculation out of inner loop. This prepares
for more event processing optimization.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D6384
remounted to writeable after initial read-only. Assign to
dev->si_mountpt earlier to account the accesses done at the mount
time.
Based on submission by: bde
MFC after: 1 week
a string, interprets it as a standard UUID, and returns a binary from
of the UUID. uuid-to-string does the reverse. The binary UUID is in
allocated memory, so you'll need to free it with 'free' after you are
done using it. It won't be automatically garbage collected. Likewise
with the string...
MFC After: 3 days
* always allocate maximum size txhdr entries
* set the right rx header offset/framesize based on firmware
This still isn't what's completely required for fw 598 support; there's
more to come.
Tested:
* Apple BCM94321MC 11abgn NIC, 11a STA mode, firmware version 4xx.
Obtained from: DragonflyBSD (txhdr entry sizing), fw 598 RX header size (linux b43)
Previously the command completion interrupt would post any pending
command immediately before pcib_pcie_hotplug_update() had been
run to inspect the current status. Now, the command completion
interrupt merely clears the flag and stops the timer assuming that
the caller is always going to call pcib_pcie_hotplug_update() to
generate the next hotplug command if one is needed.
While here, fix a bug for systems with command completion where the
old (existing) value was written to the slot control register instead
of the new value. This fixes the complaint about a missing hotplug
interrupt on my T400.
Differential Revision: https://reviews.freebsd.org/D6363
devd requires location and pnpinfo strings generated by bus drivers
to be formatted as a list of name=value keypairs. Non-conforming
bus drivers cause devd to mis-parse device events for these buses.
Note that this documents the desired requirements. devctl_safe_quote()
doesn't yet escape backslash characters, and devd doesn't handle escaped
characters in quoted values.
Differential Revision: https://reviews.freebsd.org/D6252
If platform support EXT_RESOURCES, clocks and resets are handled out of
the box.
If not driver can be subclassed using the generic_usb interface.
generic_usb name was choosed because at one point I'll add generic-ehci
FDT driver.
Reviewed by: jmcneill, hselasky
Approved by: andrew (mentor)
Differential Revision: https://reviews.freebsd.org/D5481
Replace ifnet list lookup (which is broken since r287197, because
IFT_IEEE80211 type is not used anymore) with iteration on
ieee80211com list.
Reviewed by: adrian
Differential Revision: https://reviews.freebsd.org/D6419
Speedup is hard to measure because the only time vdev_geom_open_by_guids
gets called on many drives at the same time is during boot. But with
vdev_geom_open hacked to always call vdev_geom_open_by_guids, operations
like "zpool create" speed up by 65%.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_geom.c
* Read all of a vdev's labels in parallel instead of sequentially.
* In vdev_geom_read_config, don't read the entire label, including
the uberblock. That's a waste of RAM. Just read the vdev config
nvlist. Reduces the IO and RAM involved with tasting from 1MB to
448KB.
Reviewed by: avg
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D6153
It is normal for ZOMBIE ports to be logged out. This status is not really
an error until Gone Device Timeout expires, so make CAM retry after delay.
MFC after: 1 week
Firmware automatically logs in only to local loop ports, and those ports
can be easily identified without extra flag by zero domain and area IDs.
MFC after: 1 week
supports the Security Extensions or not. This bit is not the same as the CPU one.
Currently we are not checking for either before trying to write to the special
registers. This can lead to problems on hardware or simulators that do not
provide the security extensions. Add the missing checks. Their interactions with
the CPU flag is not entirely clear to me but using a macro will make it easier
to quickly adjust the condition once the CPU bits are sorted as well.
Reviewed by: br
Sponsored by: DARPA/AFRL
Differential Revision: https://reviews.freebsd.org/D6397
* In gic_v3_attach free the correct data on failure.
* Implement gic_v3_teardown_intr.
* Update the panic string when enabling/disabling an invalid interrupt.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013.
A robust mutex is guaranteed to be cleared by the system upon either
thread or process owner termination while the mutex is held. The next
mutex locker is then notified about inconsistent mutex state and can
execute (or abandon) corrective actions.
The patch mostly consists of small changes here and there, adding
neccessary checks for the inconsistent and abandoned conditions into
existing paths. Additionally, the thread exit handler was extended to
iterate over the userspace-maintained list of owned robust mutexes,
unlocking and marking as terminated each of them.
The list of owned robust mutexes cannot be maintained atomically
synchronous with the mutex lock state (it is possible in kernel, but
is too expensive). Instead, for the duration of lock or unlock
operation, the current mutex is remembered in a special slot that is
also checked by the kernel at thread termination.
Kernel must be aware about the per-thread location of the heads of
robust mutex lists and the current active mutex slot. When a thread
touches a robust mutex for the first time, a new umtx op syscall is
issued which informs about location of lists heads.
The umtx sleep queues for PP and PI mutexes are split between
non-robust and robust.
Somewhat unrelated changes in the patch:
1. Style.
2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared
pi mutexes.
3. Removal of the userspace struct pthread_mutex m_owner field.
4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls
the lifetime of the shared mutex associated with a vnode' page.
Reviewed by: jilles (previous version, supposedly the objection was fixed)
Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects)
Tested by: pho
Sponsored by: The FreeBSD Foundation
structures in the add of a new tcp-stack that came in late to me
via email after the last commit. It also makes it so that a new
stack may optionally get a callback during a retransmit
timeout. This allows the new stack to clear specific state (think
sack scoreboards or other such structures).
Sponsored by: Netflix Inc.
Differential Revision: http://reviews.freebsd.org/D6303
method. This is required for upcoming iSER support.
Obtained from: Mellanox Technologies (earlier version)
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
FreeBSD zfs_ioc_rename() has an option, not present upstream, that
allows to rename snapshots without unmounting them first. I am not sure
what is a rationale for that option, but its actual behavior was the
opposite of the intended behavior. That is, by default the snapshots
were not unmounted.
The option was introduced as part of a large update from upstream in
r248498.
One of the consequences was a havoc under .zfs/snapshot after the rename.
The snapshots got new names but were mounted on top of directories with
old names, so readdir would list the new names, but lookup would still
find the old mounts.
PR: 209093
Reported by: Frédéric VANNIÈRE <f.vanniere@planet-work.com>
MFC after: 5 days
objects with the same name in different sets.
Add optional manage_sets() callback to objects rewriting framework.
It is intended to implement handler for moving and swapping named
object's sets. Add ipfw_obj_manage_sets() function that implements
generic sets handler. Use new callback to implement sets support for
lookup tables.
External actions objects are global and they don't support sets.
Modify eaction_findbyname() to reflect this.
ipfw(8) now may fail to move rules or sets, because some named objects
in target set may have conflicting names.
Note that ipfw_obj_ntlv type was changed, but since lookup tables
actually didn't support sets, this change is harmless.
Obtained from: Yandex LLC
Sponsored by: Yandex LLC
* The default kernel and options won't build the GPL PHY bits;
* bwn(4) defaults to building as a module anyway!;
* If BWN_GPL_PHY is specified in the config file, and you uncomment
the GPL PHY bits in the module Makefile, you'll get a working
N-PHY.
This is specifically designed to be obtuse for now, as I don't want
to flip it on by default. It's easy enough for people to flip on
and build, and it's a module so the default GENERIC kernel won't be
GPL tainted.
I'll have to add an actual HAL layer that allows the GPL PHY to be loaded
before if_bwn so it can be "magic", but that'll come later.
Tested:
* BCM4321 11abg NIC, STA mode
This is a GPLv2 PHY-N implementation based on the Linux b43 driver,
ported over to work in bwn(4).
I've tested this on the BCM4321 11abgn device, in 11bg and 11a modes.
The b43 PHY code only supports 11abg, no 11n, and 20MHz only wide
channels.
Yes, this is a GPLv2 driver, so it won't be included in the
default builds.
Tested:
* BCM4321 11abgn device (Apple!), 11bg and 11a STA mode.
Obtained from: Linux b43
Now that we've got access to SPROM and can access board identification,
this implements all known remaining hardware work-arounds for the bhnd(4)
PCI and PCIe-G1 cores operating endpoint mode.
Additionally, this adds an initial set of skeleton PCIe-G2 hostb and pcib
drivers, required by fullmac and newer softmac devices.
Submitted by: Landon Fuller <landonf@landonf.org>
Differential Revision: https://reviews.freebsd.org/D6377
PCIe PHY needs different initialization on MT7628/MT7688 SoCs than it does
on MT7620.
However, LEDE (and OpenWRT) dts files have the PCIe node for MT7628/MT7688
as compatible with mt7620-pci.
We already can handle this properly in our driver, so we just need to add
compat strings to fbsd-mt7628an.dtsi and the PCIe driver.
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D6395
This is an import of the reworked LEDE dts files. Besides other things
they make it easier for us to reuse.
The only diffs left are for the following SoCs:
MT7620A (fbsd-mt7620a.dtsi)
MT7621 (fbsd-mt7621.dtsi)
MT7628 (fbsd-mt7628an.dtsi)
RT3883 (fbsd-rt3883.dtsi)
So we include the fbsd-*.dtsi files at the end of the original LEDE dtsi
files, using '#include "fbsd-xxxx.dtsi"'.
For example, for MT7621, the LEDE dtsi file is mt7621.dtsi. At the end of
it we add:
#include "fbsd-mt7621.dtsi"
Approved by: adrian (mentor)
Obtained from: LEDE project
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D6394
Fix issues that crept in with initial import.
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D6393
Fix efx_mcdi_request_poll so it only raises an exception if EIO is
reported from a detected MC assert or reboot. This prevents
an unnecessary exception being raised if an MCDI response error code
is trandlated to EIO.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6392
The event/timer block used sysclk in Huntington, but has been
moved to the dpcpu clock domain for Medford. Fix the computed
timer quantum to use the right clock.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6389
This allows the driver to fall back to the largest usable MTU if a
user attempts to configure an unprivileged function with an MTU higher
than that of the attached port.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6387
Check licensing support at NIC startup to avoid multiple checks later.
As state is stored, licensing initialisation is moved later in start
procedure.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6385
Centralizes fetching of board information (vendor, type, revision, etc),
and adds support for matching quirks against board identification info.
* Adds a BHND_BUS_READ_BOARD_INFO(), allowing bhnd bus/bus parent(s) to
handle implementation-specific fetching of board info.
* Integrates board type constants from the latest Broadcom ISC-licensed
bcmdevs.h included in dd-wrt's Broadcom driver source drops.
* Adds support for matching on chip/board quirks to bhnd_device_quirks()/
bhnd_chip_quirks().
* Use the new board/chip quirk matching to match Apple devices that failed
to set BFL2_PCIEWAR_OVR in SROM.
Submitted by: Landon Fuller <landonf@landonf.org>
Differential Revision: https://reviews.freebsd.org/D6361
Relies on BHND(4) driver.
There files contains machine-dependent code for Broadcom MIPS processor and
provide UART driver.
This is a work in progress; it and the current bhnd code is enough to boot
on the ASUS RT-N16 and RT-N53 platforms.
Submitted by: Michael Zhilin <mizhka@gmail.com>
Differential Revision: https://reviews.freebsd.org/D6251
This patch fix trampoline build. inckern.S increases stack and calls _startC
of elf_trampoline, so inckern.S should be called before elf_trampoline. gcc4.2 puts
text (code) into image according to order of source files in this call, so order has changed.
In addition make will install trampoline kernel. It allows to use kernel for firmware build.
Submitted by: Michael Zhilin <mizhka@gmail.com>
Differential Revision: https://reviews.freebsd.org/D6242
There are 5 logging levels:
* ERROR
* WARN
* INFO
* DEBUG
* TRACE
There are 2 logging context:
* with
* without device
DEBUG and TRACE records are printed only if bootverbose.
Logging records are printed with source code line information if acceptable
logging level is DEBUG or TRACE.
Submitted by: Michael Zhilin <mizhka@gmail.com>
Differential Revision: https://reviews.freebsd.org/D6247
Extend macros for MIPS & ARM cores. Now only BCM cores can be matched by matching mechanism.
Submitted by: Michael Zhilin <mizhka@gmail.com>
Differential Revision: https://reviews.freebsd.org/D6246
This is an updated version of D6140.
Tested:
* BCM4321 11abgn, STA mode (11a)
Submitted by: avos
Differential Revision: https://reviews.freebsd.org/D6140
Some ACPI operations such as mutex acquires and event waits accept a
timeout. The ACPI OSD layer implements these timeouts by using regular
sleep timeouts. However, this doesn't work during early boot before
event timers are setup. Instead, use polling combined with DELAY()
to spin.
This fixes booting on upcoming Intel systems with Kaby Lake processors.
Tested by: "Jeffrey E Pieper" <jeffrey.e.pieper@intel.com>
Reviewed by: jimharris
MFC after: 1 week
* DUALPHY in TGSHIGH tells us there's a phy that is dualband, rather than
two separate PHYs/MACs (which we almost but don't quite yet support.)
Use it.
* Add the BCM4322 PCI ID to the list of devices we don't override.
This means the 2g/5g flags are preserved, and thus we get 5GHz
operation (with N-PHY, of course.)
Tested:
* BCM4311, STA mode (11bg)
* BCM4312, STA mode (11bg)
* BCM4321, STA mode (11abg)
Sponsored by: Palm Springs
* unbreak non-debug builds - don't default to debugging SCAN; that was
left-over from my testing.
* include opt_siba.h, now that it's generated as appropriate.
* stick the debug enum outside the debug block, just so it's there for
any code that wants to set siba_debug for some reason (like say,
my debugging muckup.)
* make DPRINTF() use __VA_ARGS__ for formatting too, so it correctly
handles printing w/ no args.
* Make DPRINTF() use device_printf().
Sponsored by: Palm Springs
Coverity reports an uninitialized "dir" in case the switch defaults
without hitting any case. Respect the original intent and quell the
false positive with the relatively new __unreachable() builtin.
CID: 1331566
Coverity reports an uninitialized "len" in case the switch defaults
without hitting any case. Respect the original intent and quell the
false positive with the relatively new __unreachable() builtin.
CID: 1347796
This are based on Mach3.
Documentation is pending but has been promised.
Submitted by: Dan Partelly
Reviewed by: adrian, jhb (older version)
Differential Revision: https://reviews.freebsd.org/D4230
RelNotes: yes
so the module could be loaded.
Discussed with: andrew
Reviewed by: andrew
Sponsored by: DARPA/AFRL
Differential Revision: https://reviews.freebsd.org/D6359
That was just wrong. In fact, we can safely keep this static entry when
it's inactive.
Now the destructive action is moved to the reclaim method and the
function is renamed from zfsctl_snapdir_inactive(0 to
zfsctl_snapdir_reclaim().
Also, we can use gfs_vop_reclaim() instead of gfs_dir_inactive() +
kmem_free().
Lastly, we can just assert that the node does not any children when it
is reclaimed, even on the force unmount. That's because zfs_umount()
does an extra vflush() pass which should destroy all snapshot-mountpoint
vnodes that are the snapdir's children.
MFC after: 5 weeks
Those vnodes should not linger. "Stale" nodes may get out of
synchronization with actual snapshots. For example if we destroy a
snapshot and create a new one with the same name. Or when we rename a
snapshot.
While there fix the argument type for zfsctl_snapshot_reclaim().
Also, its original argument can be passed to gfs_vop_reclaim() directly.
Bug 209093 could be related although I have not specifically verified
that. Referencing just in case.
PR: 209093
MFC after: 5 weeks
Dropping the root vnode's lock after VFS_ROOT() didn't really help the
fact that we acquired the lock while holding its child's, .zfs, lock
while performing the operaiton.
So, directly use zfs_zget() to get the root vnode.
While there simplify the code in zfsctl_freebsd_root_lookup.
We know that .zfs is always exclusively locked.
We know that there is already a reference on *vpp, so no need for an
extra one.
Account for the fact that .. lookup may ask for a different lock type,
not necessarily LK_EXCLUSIVE. And handle a possible failure to acquire
the lock given the lock flags.
MFC after: 5 weeks
In fact, that was dangerous. For example, zfsctl_snapshot_reclaim()
calls gfs_dir_lookup() on ".." path and that ends up calling
gfs_lookup_dot() which violated locking order by acquiring the parent's
directory vnode lock after the child's vnode lock.
Also, the previous behavior was inconsistent as gfs_dir_lookup()
returned a locked vnode for . and .. lookups, but not for any other.
Now gfs_lookup_dot() just references a resulting vnode and the locking
is done in its consumers, where necessary.
Note that we do not enable shared locking support for any gfs / zfsctl
vnodes.
This commit partially reverts r273641.
MFC after: 5 weeks
The former acquired a snap vnode lock while holding sd_lock while the
latter does the opposite.
The solution is drop sd_lock before acquiring the vnode lock. That
should be okay as we are still holding a lock on the 'snapshot'
directory in the exclusive mode. That lock ensures that there are no
concurrent lookups in the directory and thus no concurrent mount attempts.
But now we have to account for the possibility that the snap vnode
might get reclaim after we drop sd_lock and before we can get
the node lock. So, check for that case and retry.
MFC after: 5 weeks
MSI or MSI-X interrupts, however this is enought to boot FreeBSD under the
ARM Foundation Model with a GICv3 interrupt controller.
Approved by: ABT Systems Ltd
Relnotes: yes
Sponsored by: The FreeBSD Foundation
This commit partially reverts r273641 which introduced the leak.
It did so to accomodate for some consumers of traverse() that expected
the starting vnode to stay as-is. But that introduced the leak in the
case when a mounted filesystem was found and its root vnode was
returned.
r299914 removed the troublesome consumers and now there is no reason to
keep the starting vnode. So, now the new rules are:
- if there is no mounted filesystem, then nothing is changed
- otherwise the starting vnode is always released
- the root vnode of the mounted filesystem is returned locked and
referenced in the case of success
MFC after: 5 weeks
X-MFC after: r299914
updated, and until further testing can be done, this is disabled for now.
It is expected arm64 will switch to this interface, and the old interface
will be removed before 11.0 is released.
Obtained from: ABT Systems Ltd
Relnotes: yes
Sponsored by: The FreeBSD Foundation
at it use NULL for some pointer checks.
Bump the FreeBSD version to force recompilation of all kernel modules
due to a structure size change.
Obtained from: kmacy @
MFC after: 1 week
Sponsored by: Mellanox Technologies
translate the pci rid to a controller ID. The translation could be based
on the 'msi-map' OFW property, a similar ACPI option, or hard-coded for
hardware lacking the above options.
Reviewed by: wma
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Add a new get_id interface to pci and pcib. This will allow us to both
detect failures, and get different PCI IDs.
For the former the interface returns an int to signal an error. The ID is
returned at a uintptr_t * argument.
For the latter there is a type argument that allows selecting the ID type.
This only specifies a single type, however a MSI type will be added
to handle the need to find the ID the hardware passes to the ARM GICv3
interrupt controller.
A follow up commit will be made to remove pci_get_rid.
Reviewed by: jhb, rstone (previous version)
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6239
interface with 5 methods to mirror the 5 MSI/MSI-X methods in the pcib
interface. The pcib driver will need to perform a device specific lookup
to find the MSI controller and pass this to intrng as the xref. Intrng
will finally find the controller and have it handle the requested operation.
Obtained from: ABT Systems Ltd
MFH: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5985
This is needed because the new MCDI command nvram_private_append can
return MC_CMD_ERR_EEXIST
Submitted by: Tom Millington <tmillington at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
It seems that at present vfs_read_dirent() is used only with filesystems
that do not support cookies, so the bug never manifested itself.
MFC after: 1 week
Report the full error descriptor in a form that can be passed to
firmwaresrc/dpcpu/scripts/evdecode
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
We pretend that snapshots mounted under .zfs are part of the original
filesystem and we try very hard to hide vnodes on top of which the snapshots
are mounted. Given that I believe that the removed operations should
never be called. They might have been called previously because
of issues fixed in r299906, r299908 and r299913.
MFC after: 5 weeks
This is a bit hackish, but the flag is currently set only for ZFS
snapshots mounted under .zfs. mountcheckdirs() can change cdir/rdir
references to a covered vnode. But for the said snapshots the covered
vnode is really ephemeral and it must never be accessed (except
for a few specific cases).
To do: consider removing mountcheckdirs() entirely
MFC after: 5 days
Length consistency checks were failing for ECC hashes.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
This revision introduces basic support for the internal ESW switch found
Ralink/Mediatek SoCs such as RT3050, RT3352, RT5350, MT7628; and GSW
found in MT7620 and MT7621.
It only supports 802.1q VLANs and doesn't support external PHYs at the
moment (only the ones that are built into the switch itself).
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D6348
Previosuly we did that only if the snapshot was mounted earlier, its
root vnode got recycled and then we accessed it again.
We never cleared the flag for a freshly mounted snapshot.
That was very inconsistent and probably a source of some bugs.
Or maybe that painted over some bugs which might get revealed now.
We should consistently clear the flag because we try very hard to
pretend that snapshots auto-mounted under .zfs are part of their
original filesystem. In other words, we try to hide the fact that they
are different filesystems / mountpoints.
MFC after: 5 weeks
Increase buffer sizes for license keys to 160 bytes to accomodate ECDSA
hashes.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
The logic is similar to that already present in zfs_dirlook() to handle
a dot-dot lookup on a root vnode of a snapshot mounted under
.zfs/snapshot/.
illumos does not have an equivalent of vop_vptocnp, so there only the
lookup had to be patched up.
MFC after: 4 weeks
Implementation of the MCDI commands for Siena boards was requesting
the wrong operation.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6370
Perform a more accurate check of whether the PCIe bandwidth is
sufficient for the current/supported port modes.
Give a different warning if there is sufficient bandwidth to achieve
line rate, but the link is not fast enough for optimal latency.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6369
Find end of segments in a more direct way that avoids an error report at
the terminator.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6367
A lookup on a VPD entry which is missing reports several failure
messages as it propagates through wrapper functions. Restructured
the wrappers to treat this gracefully as an expected case.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6366
* Remove excessive references on a snapshot mountpoint vnode.
zfsctl_snapdir_lookup() called VN_HOLD() on a vnode returned from
zfsctl_snapshot_mknode() and the latter also had a call to VN_HOLD()
on the same vnode.
On top of that gfs_dir_create() already returns the vnode with the
use count of 1 (set in getnewvnode).
So there was 3 references on the vnode.
* mount_snapshot() should keep a reference to a covered vnode.
That reference is owned by the mountpoint (mounted snapshot filesystem).
* Remove cryptic manipulations of a covered vnode in zfs_umount().
FreeBSD dounmount() already does the right thing and releases the covered
vnode.
PR: 207464
Reported by: dustinwenz@ebureau.com
Tested by: Howard Powell <hpowell@lighthouseinstruments.com>
MFC after: 3 weeks
Silent handling of failure to invoke functions that are not supported on
older licensing versions.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6365
Create separate implementations of the efx_lic API for each revision of
the licensing system. All processing of the V1/V2 license partition is
moved to efx_lic, and an implementation of V3 licensing uses the existing
TLV functions with extensions for writing new TLV entries.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6364
For channel0, it will never be processed on event handling path,
so there is no need to install it. After skipping in the channel0
installation, we could discard the channel0 check on event
handling hot code path.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D6333
When "cp" of a file with read-only (mode 0444) to a fuse mounted
file system was attempted it would fail with EACCES. This was because
fuse would attempt to open the file WRONLY and the open would fail.
This patch changes the fuse_vnop_open() to test for an extant read-write
open and use that, if it is available.
This makes the "cp" of a read-only file to the fuse mounted file system
work ok.
There are simpler ways to fix this than adding the fuse_filehandle_validrw()
function, but this function is useful for future patches related to
exporting a fuse filesystem via NFS.
MFC after: 2 weeks
The A83T thermal sensor controller has three sensors. Sensor 0 corresponds
to CPU cluster 0, sensor 1 to CPU cluster 1, and sensor 2 to the GPU. This
driver exports the temperature sensor readings via sysctl.
Calibration data is obtained from SRAM found in the Secure ID module.
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D6378
I've submitted an alternative proposal to -core about just importing
the (converted) GPL PHY code in an alternate directory under sys/gnu/
so I don't have to rewrite it all to be BSD licenced.
eg an NFSv4 root over WiFi: boot from md_root (small rootfs image
preloaded by loader(8)), setup WiFi, and then reroot into the actual
root, over NFS.
Note that it's currently limited to NFSv4, and due to problems with
nfsuserd(8) it requres a workaround on the server side: one needs
to set the vfs.nfsd.enable_stringtouid=1 sysctl and not run nfsuserd(8)
on either the server or the client side.
Reviewed by: rmacklem@
MFC after: 1 month
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6347
icmp6.redirtimeout, icmp6.nd6_maxnudhint and ip6.rr_prune are left
undocumented as they appear to have no effect. Some existing sysctl
descriptions were modified for consistency and style, and the
ip6.tempvltime and ip6.temppltime handlers were rewritten to be a bit
simpler and to avoid setting the sysctl value before validating it.
MFC after: 3 weeks
When I/O on a file under fuse is switched from buffered to DIRECT_IO,
it was possible to read stale (before a recent modification) data from
the buffer cache. This patch invalidates the buffer cache for the
file to fix this.
PR: 194293
MFC after: 2 weeks
N-PHY and later require a lot more plcp specific setup for the PHY
to know what to transmit. I've been spoilt by the atheros, intel
and realtek parts where you don't have to hand-assemble the PLCP
but .. well, apparently Broadcom require a lot more work.
This, and PHY-N itself, was the last major missing bit to get 11a
OFDM transmit to work. Without this, CCK transmit worked but
OFDM transmit would always fail (with stat.phy_err set to 0x80.)
I have no idea what 0x80 is, and I went mad reading the broadcom
vendor driver to try and figure it out.
Tested:
* BCM4312 (PHY-LP)
* BCM4321 (PHY-N), 11a, 11bg.
Set phy-full-init always to 1 for now; PHY-N supports being able to do
partial init for things like fast channel changes but I'm going to
ignore it all.
This is a big commit with a whole lot of little changes, all in
preparation for PHY-N and rev 5xx firmware.
* add in a write method that does an explicit flush
* change the txpwr recalc type to return an enum, versus just an int.
* add in PHY-N RX frame format bits, for decoding RX RSSI and such
* add in the header space calculation for rev 5xx firmware.
* add in a whole bunch of new types that the newer and 5g phy code
needs. Notably, broadcom has a split 5GHz band concept -
5G-Low, 5G(-Mid) and 5G-High. I kept encountering this at my
day job and wondered whether it was just some marketing thing.
Nope, turns out it isn't; it's an actual PHY thing.
* Add a "am I a siba bus device" method, that returns true.
The aim is to convert all the siba/bhnd specific bits in if_bwn
over to be wrapped in this check, so when landon does a BHND
drive through he knows which bits need updating.
Now, this the /complete/ set of changes for rev 5xx firmware.
Notably, the TX descriptor handling isn't at all done yet and the
format has changed. So don' try blindly flipping this on just yet!
The only current purpose of the pvh lock was explained there
On Wed, Jan 09, 2013 at 11:46:13PM -0600, Alan Cox wrote:
> Let me lay out one example for you in detail. Suppose that we have
> three processors and two of these processors are actively using the same
> pmap. Now, one of the two processors sharing the pmap performs a
> pmap_remove(). Suppose that one of the removed mappings is to a
> physical page P. Moreover, suppose that the other processor sharing
> that pmap has this mapping cached with write access in its TLB. Here's
> where the trouble might begin. As you might expect, the processor
> performing the pmap_remove() will acquire the fine-grained lock on the
> PV list for page P before destroying the mapping to page P. Moreover,
> this processor will ensure that the vm_page's dirty field is updated
> before releasing that PV list lock. However, the TLB shootdown for this
> mapping may not be initiated until after the PV list lock is released.
> The processor performing the pmap_remove() is not problematic, because
> the code being executed by that processor won't presume that the mapping
> is destroyed until the TLB shootdown has completed and pmap_remove() has
> returned. However, the other processor sharing the pmap could be
> problematic. Specifically, suppose that the third processor is
> executing the page daemon and concurrently trying to reclaim page P.
> This processor performs a pmap_remove_all() on page P in preparation for
> reclaiming the page. At this instant, the PV list for page P may
> already be empty but our second processor still has a stale TLB entry
> mapping page P. So, changes might still occur to the page after the
> page daemon believes that all mappings have been destroyed. (If the PV
> entry had still existed, then the pmap lock would have ensured that the
> TLB shootdown completed before the pmap_remove_all() finished.) Note,
> however, the page daemon will know that the page is dirty. It can't
> possibly mistake a dirty page for a clean one. However, without the
> current pvh global locking, I don't think anything is stopping the page
> daemon from starting the laundering process before the TLB shootdown has
> completed.
>
> I believe that a similar example could be constructed with a clean page
> P' and a stale read-only TLB entry. In this case, the page P' could be
> "cached" in the cache/free queues and recycled before the stale TLB
> entry is flushed.
TLBs for addresses with updated PTEs are always flushed before pmap
lock is unlocked. On the other hand, amd64 pmap code does not always
flushes TLBs before PV list locks are unlocked, if previously PTEs
were cleared and PV entries removed.
To handle the situations where a thread might notice empty PV list but
third thread still having access to the page due to TLB invalidation
not finished yet, introduce delayed invalidation. Comparing with the
pvh_global_lock, DI does not block entered thread when
pmap_remove_all() or pmap_remove_write() (callers of
pmap_delayed_invl_wait()) are executed in parallel. But _invl_wait()
callers are blocked until all previously noted DI blocks are leaved,
thus ensuring that neccessary TLB invalidations were performed before
returning from pmap_remove_all() or pmap_remove_write().
See comments for detailed description of the mechanism, and also for
the explanations why several pmap methods, most important
pmap_enter(), do not need DI protection.
Reviewed by: alc, jhb (turnstile KPI usage)
Tested by: pho (previous version)
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D5747
* Log the per-completion status out if requested
* If we get a PHY failure, the retrycnt is set to 0 and ack=0, so
the logic was incorrect. So, for ack=0, ensure we don't log
a retrycnt of 0 (or rate control breaks) or a negative retrycnt
(or rate control also breaks.)
Tested:
* BCM4321 (11abgn N-PHY), BCM4312 (LP-PHY)
The RSB controller speaks a simplified two wire protocol at speeds up to
20MHz. It is used on sun8i and sun9i family SoCs to communicate with
power management ICs.
RSB isn't really I2C or SMBus, but the driver exposes an iicbus interface
to simplify power management IC drivers (which may need to support both
RSB and I2C connectivity).
