Support is implemented by mapping Linux's "struct net" into FreeBSD's
"struct vnet". Currently only vnet0 is supported by ibcore.
MFC after: 1 week
Sponsored by: Mellanox Technologies
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96
Sockets representing the TCP endpoints for iWARP connections are
allocated by the ibcore module. Before this revision they were closed
either by the ibcore module or the iw_cxgbe hardware driver depending on
the state transitions during connection teardown. This is error prone
and there were cases where both iw_cxgbe and ibcore closed the socket
leading to double-free panics. The fix is to let ibcore close the
sockets it creates and never do it in the driver.
- Use sodisconnect instead of soclose (preceded by solinger = 0) in the
driver to tear down an RDMA connection abruptly. This does what's
intended without releasing the socket's fd reference.
- Close the socket in ibcore when the iWARP iw_cm_id is destroyed. This
works for all kinds of sockets: clients that initiate connections,
listeners, and sockets accepted off of listeners.
Reviewed by: Steve Wise @ Open Grid Computing, hselasky@
MFC after: 3 days
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D9796
like other PCI network drivers. The sys/ofed directory is now mainly
reserved for generic infiniband code, with exception of the mthca driver.
- Add new manual page, mlx4en(4), describing how to configure and load
mlx4en.
- All relevant driver C-files are now prefixed mlx4, mlx4_en and
mlx4_ib respectivly to avoid object filename collisions when compiling
the kernel. This also fixes an issue with proper dependency file
generation for the C-files in question.
- Device mlxen is now device mlx4en and depends on device mlx4, see
mlx4en(4). Only the network device name remains unchanged.
- The mlx4 and mlx4en modules are now built by default on i386 and
amd64 targets. Only building the mlx4ib module depends on
WITH_OFED=YES .
Sponsored by: Mellanox Technologies
by returning success on FIONBIO and FIOASYNC IOCTLs. The actual flags
handling is done by the kern_ioctl() function.
Reported by: Alex Bowden <alex.bowden@outlook.com>
Sponsored by: Mellanox Technologies
MFC after: 1 week
In pathological situations where the master subnet manager becomes
unresponsive for an extended period, we may otherwise end up queuing all
of the system's mbufs while waiting for a response to a path record lookup.
This addresses the same issue as commit 1e85b806f9 in Linux.
Reviewed by: cem, ngie
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
This addresses a regression from an earlier upstream change which caused
cma_acquire_dev() to bypass the port GID cache and instead query the HCA
for each entry in its GID table. These queries can become extremely slow on
multiport devices, which has a negative impact on connection setup times.
Discussed with: hselasky
Obtained from: Linux
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
SDP transmit and receive rings are always created in a sleepable context,
so we can use M_WAITOK and remove error checks.
Sponsored by: EMC / Isilon Storage Division
The generic socket may be detached from the PCB before the completion
queue is drained and destroyed, so this change closes a race condition
in connection teardown.
Sponsored by: EMC / Isilon Storage Division
tunable SYSCTL's. Linux module parameters are associated with the
module they belong to. FreeBSD does not share this concept of a parent
module. Instead add macros which define the prefix to use for the
module parameters in the LinuxKPI consumers.
While at it convert all "bool" LinuxKPI module parameters to "byte"
type, because we don't have a "bool" type of SYSCTL in FreeBSD.
Sponsored by: Mellanox Technologies
MFC after: 1 week
- Added check that the SCOPE ID is only restored for IPv6 linklocal
addresses.
- Changes made by r237263 in the "cma_bind_addr()" function did not
check if the socket address was of type IPv6 and used the IPv4
socket address for IPv6 addresses. This caused the function to
fail. Fixed this.
- In the "rdma_gid2ip()" function and some other places the "sin6_len"
and "sin6_scope_id" fields were not set for IPv6 socket
addresses. Fixed this.
- The scope ID is not stored as part of the GID entries and must be
passed as an argument to "rdma_gid2ip()".
- Added new method to "struct ib_device" which returns a pointer to
the network interface which belongs to the given infiniband
device. This is needed to be able to get the scope ID for IPv6
addresses via the associated ethernet interface.
- Added convenience function, "rdma_get_ipv6_scope_id()", to get the
scope ID for IPv6 addresses.
- Implemented new "get_netdev" method for mlx4ib. Other IB controller
drivers which want to support IPv6 addresses needs to implement this
aswell.
- Bumped the FreeBSD version due to changing "struct ib_device".
Sponsored by: Mellanox Technologies
MFC after: 1 week
This fixes a kernel panic when using IPoIB with VIMAGE and infiniband.
PR: 208957
Sponsored by: Mellanox Technologies
Tested by: Justin Clift <justin@postgresql.org>
MFC after: 1 week
IPv6 addresses has a scope ID which sometimes is stored in the
"sin6_scope_id" field of "struct sockaddr_in6" and sometimes as part
of the IPv6 address itself depending on the context. If the scope ID
is not in the expected location, the IPv6 address lookups in the
so-called GID table will fail. Some code factoring has been made to
achieve a clean exit of the "addr_resolve" function via a common
"done" label.
Sponsored by: Mellanox Technologies
Submitted by: Shani Michaeli <shanim@mellanox.com>
MFC after: 1 week
The FreeBSD's TCP/IP stack assumes that the IP-header is 32-bits aligned
when decoding it. Else unaligned 32-bit memory access can happen, which
not all processor architectures support.
Sponsored by: Mellanox Technologies
MFC after: 1 week
When downing a mlxen network adapter we need to check the port_up variable
to ensure we don't continue to transmit data or restart timers which can
reside in freed memory.
Sponsored by: Mellanox Technologies
MFC after: 1 week
And factor out tcp_lro_rx_done, which deduplicates the same logic with
netinet/tcp_lro.c
Reviewed by: gallatin (1st version), hps, zbb, np, Dexuan Cui <decui microsoft com>
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5725
connection manager. Examining so_comp without synchronization with
iw_so_event_handler is a harmless race.
Submitted by: Krishnamraju Eraparaju @ Chelsio
Reviewed by: Steve Wise @ Open Grid Computing
Sponsored by: Chelsio Communications
Use the Toeplitz hash value as source for the flowid. This makes the
hash value more suitable for so-called hash bucket algorithms which
are used in the FreeBSD's TCP/IP stack when RSS is enabled.
Sponsored by: Mellanox Technologies
MFC after: 1 week
ipoib module.
The bpfdetach() function is trying to turn off promiscious mode on the
network interface it is attached to while holding a mutex. The fix
consists of ignoring any further calls to the ipoib_ioctl() function
when the network interface is going to be detached. The ipoib_ioctl()
function might sleep.
Sponsored by: Mellanox Technologies
MFC after: 1 week
- Add some new hlist macros.
- Update existing hlist macros removing the need for a temporary
iteration variable.
- Properly define the RCU hlist macros to be SMP safe with regard
to RCU.
- Safe list macro arguments by adding a pair of parentheses.
- Prefix the _list_add() and _list_splice() functions with "linux"
to reflect they are LinuxKPI internal functions.
Obtained from: Linux
MFC after: 1 week
Sponsored by: Mellanox Technologies
The iWARP Connection Manager (CM) on FreeBSD creates a TCP socket to
represent an iWARP endpoint when the connection is over TCP. For
servers the current approach is to invoke create_listen callback for
each iWARP RNIC registered with the CM. This doesn't work too well for
INADDR_ANY because a listen on any TCP socket already notifies all
hardware TOEs/RNICs of the new listener. This patch fixes the server
side of things for FreeBSD. We've tried to keep all these modifications
in the iWARP/TCP specific parts of the OFED infrastructure as much as
possible.
Submitted by: Krishnamraju Eraparaju @ Chelsio (with design inputs from Steve Wise)
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D4801
The only piece of information that is required is rt_flags subset.
In particular, if_loop() requires RTF_REJECT and RTF_BLACKHOLE flags
to check if this particular mbuf needs to be dropped (and what
error should be returned).
Note that if_loop() will always return EHOSTUNREACH for "reject" routes
regardless of RTF_HOST flag existence. This is due to upcoming routing
changes where RTF_HOST value won't be available as lookup result.
All other functions require RTF_GATEWAY flag to check if they need
to return EHOSTUNREACH instead of EHOSTDOWN error.
There are 11 places where non-zero 'struct route' is passed to if_output().
For most of the callers (forwarding, bpf, arp) does not care about exact
error value. In fact, the only place where this result is propagated
is ip_output(). (ip6_output() passes NULL route to nd6_output_ifp()).
Given that, add 3 new 'struct route' flags (RT_REJECT, RT_BLACKHOLE and
RT_IS_GW) and inline function (rt_update_ro_flags()) to copy necessary
rte flags to ro_flags. Call this function in ip_output() after looking up/
verifying rte.
Reviewed by: ae
sbappendstream() does. Although, M_NOTREADY may appear only on SOCK_STREAM
sockets, due to sendfile(2) supporting only the latter, there is a corner
case of AF_UNIX/SOCK_STREAM socket, that still uses records for the sake
of control data, albeit being stream socket.
Provide private version of m_clrprotoflags(), which understands PRUS_NOTREADY,
similar to m_demote().
Add if_requestencap() interface method which is capable of calculating
various link headers for given interface. Right now there is support
for INET/INET6/ARP llheader calculation (IFENCAP_LL type request).
Other types are planned to support more complex calculation
(L2 multipath lagg nexthops, tunnel encap nexthops, etc..).
Reshape 'struct route' to be able to pass additional data (with is length)
to prepend to mbuf.
These two changes permits routing code to pass pre-calculated nexthop data
(like L2 header for route w/gateway) down to the stack eliminating the
need for other lookups. It also brings us closer to more complex scenarios
like transparently handling MPLS nexthops and tunnel interfaces.
Last, but not least, it removes layering violation introduced by flowtable
code (ro_lle) and simplifies handling of existing if_output consumers.
ARP/ND changes:
Make arp/ndp stack pre-calculate link header upon installing/updating lle
record. Interface link address change are handled by re-calculating
headers for all lles based on if_lladdr event. After these changes,
arpresolve()/nd6_resolve() returns full pre-calculated header for
supported interfaces thus simplifying if_output().
Move these lookups to separate ether_resolve_addr() function which ether
returs error or fully-prepared link header. Add <arp|nd6_>resolve_addr()
compat versions to return link addresses instead of pre-calculated data.
BPF changes:
Raw bpf writes occupied _two_ cases: AF_UNSPEC and pseudo_AF_HDRCMPLT.
Despite the naming, both of there have ther header "complete". The only
difference is that interface source mac has to be filled by OS for
AF_UNSPEC (controlled via BIOCGHDRCMPLT). This logic has to stay inside
BPF and not pollute if_output() routines. Convert BPF to pass prepend data
via new 'struct route' mechanism. Note that it does not change
non-optimized if_output(): ro_prepend handling is purely optional.
Side note: hackish pseudo_AF_HDRCMPLT is supported for ethernet and FDDI.
It is not needed for ethernet anymore. The only remaining FDDI user is
dev/pdq mostly untouched since 2007. FDDI support was eliminated from
OpenBSD in 2013 (sys/net/if_fddisubr.c rev 1.65).
Flowtable changes:
Flowtable violates layering by saving (and not correctly managing)
rtes/lles. Instead of passing lle pointer, pass pointer to pre-calculated
header data from that lle.
Differential Revision: https://reviews.freebsd.org/D4102
vtophys() when loading mbufs for transmission and reception. While at
it all pointer arithmetic and cast qualifier issues were fixed, mostly
related to transmission and reception.
MFC after: 1 week
Sponsored by: Mellanox Technologies
Differential Revision: https://reviews.freebsd.org/D4284
- Added support for dumping the SFP EEPROM content to dmesg.
- Fixed handling of network interface capability IOCTLs.
- Fixed race when loading and unloading the mlxen driver by applying
appropriate locking.
- Removed two unused C-files.
MFC after: 1 week
Submitted by: Mark Bloch <markb@mellanox.com>
Sponsored by: Mellanox Technologies
Differential Revision: https://reviews.freebsd.org/D4283
using GCC for 32-bit platforms. The integer size in this case is
hardcoded 64-bit while the pointer size is 32-bit.
Sponsored by: Mellanox Technologies
MFC after: 2 weeks
- Move all files related to the LinuxKPI into sys/compat/linuxkpi and
its subfolders.
- Update sys/conf/files and some Makefiles to use new file locations.
- Added description of COMPAT_LINUXKPI to sys/conf/NOTES which in turn
adds the LinuxKPI to all LINT builds.
- The LinuxKPI can be added to the kernel by setting the
COMPAT_LINUXKPI option. The OFED kernel option no longer builds the
LinuxKPI into the kernel. This was done to keep the build rules for
the LinuxKPI in sys/conf/files simple.
- Extend the LinuxKPI module to include support for USB by moving the
Linux USB compat from usb.ko to linuxkpi.ko.
- Bump the FreeBSD_version.
- A universe kernel build has been done.
Reviewed by: np @ (cxgb and cxgbe related changes only)
Sponsored by: Mellanox Technologies
- Remove redundant NBLONG macro and use BIT_WORD()
and BIT_MASK() instead.
- Correctly define BIT_MASK() according to Linux and
update all users of this macro.
- Add missing GENMASK() macro.
- Remove all comments deriving from Linux.
Sponsored by: Mellanox Technologies
- Redefine DIV_ROUND_UP as a function macro taking two arguments
instead of none.
- Implement more Linux kernel functions related to various forms
of DELAY() and basic mathematical operations.
Sponsored by: Mellanox Technologies
- Define the kref structure identical to the one found in Linux.
- Update clients referring inside the kref structure.
- Implement kref_sub() for FreeBSD.
Reviewed by: np @
Sponsored by: Mellanox Technologies
- Reimplement ktime header file to distinguish more from Linux.
- Add new time header file to handle time related Linux functions.
Sponsored by: Mellanox Technologies
- Avoid using PAGE_MASK, because Linux defines it differently.
Use (PAGE_SIZE - 1) instead.
- Add support for for_each_sg_page() and sg_page_iter_dma_address().
Sponsored by: Mellanox Technologies
- Added support for multiple new Linux functions.
- Properly implement DEFINE_WAIT() and init_waitqueue_head() macros.
- Removed FreeBSD specific __wait_queue_head structure definition.
Sponsored by: Mellanox Technologies
Problem description:
How do we currently perform layer 2 resolution and header imposition:
For IPv4 we have the following chain:
ip_output() -> (ether|atm|whatever)_output() -> arpresolve()
Lookup is done in proper place (link-layer output routine) and it is possible
to provide cached lle data.
For IPv6 situation is more complex:
ip6_output() -> nd6_output() -> nd6_output_ifp() -> (whatever)_output() ->
nd6_storelladdr()
We have ip6_ouput() which calls nd6_output() instead of link output routine.
nd6_output() does the following:
* checks if lle exists, creates it if needed (similar to arpresolve())
* performes lle state transitions (similar to arpresolve())
* calls nd6_output_ifp() which pushes packets to link output routine along
with running SeND/MAC hooks regardless of lle state
(e.g. works as run-hooks placeholder).
After that, iface output routine like ether_output() calls nd6_storelladdr()
which performs lle lookup once again.
As a result, we perform lookup twice for each outgoing packet for most types
of interfaces. We also need to maintain runtime-checked table of 'nd6-free'
interfaces (see nd6_need_cache()).
Fix this behavior by eliminating first ND lookup. To be more specific:
* make all nd6_output() consumers use nd6_output_ifp() instead
* rename nd6_output[_slow]() to nd6_resolve_[slow]()
* convert nd6_resolve() and nd6_resolve_slow() to arpresolve() semantics,
e.g. copy L2 address to buffer instead of pushing packet towards lower
layers
* Make all nd6_storelladdr() users use nd6_resolve()
* eliminate nd6_storelladdr()
The resulting callchain is the following:
ip6_output() -> nd6_output_ifp() -> (whatever)_output() -> nd6_resolve()
Error handling:
Currently sending packet to non-existing la results in ip6_<output|forward>
-> nd6_output() -> nd6_output _lle() which returns 0.
In new scenario packet is propagated to <ether|whatever>_output() ->
nd6_resolve() which will return EWOULDBLOCK, and that result
will be converted to 0.
(And EWOULDBLOCK is actually used by IB/TOE code).
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D1469
before proceeding. Otherwise, nothing prevents it from running after the
MAD agent struct has been been freed, and this results in a use-after-free
when the task's ta_pending count is incremented in the callout handler.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
operations that map a single page that has an associated vm_page_t.
This does not permit mapping larger regions (such as a PCI memory
BAR) and it does not permit mapping addresses beyond the top of RAM
(such as a 64-bit BAR located above the top of RAM).
Instead of using a single OBJT_DEVICE object and passing the physaddr via
the offset as a hack, create a new sglist and OBJT_SG object for each
mmap request. The requested memory attribute is applied to the object
thus affecting all pages mapped by the request.
Reviewed by: hselasky, np
MFC after: 1 week
Sponsored by: Chelsio
Differential Revision: https://reviews.freebsd.org/D3386
the last OFED update (r278886).
iWARP on FreeBSD is properly integrated with the network stack and the
iWARP drivers _never_ operate out of any private TCP port-space that is
invisible to the kernel. Instead, an iWARP connection shows up as a TCP
socket (which is what it is) fully visible to the kernel and standard
tools like netstat, sockstat, etc.
order, but IN_ZERONET and IN_LOOPBACK expect it in host order.
Submitted by: Tao Liu <Tao.Liu@isilon.com>
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
In tf_dequeue(), if we reach the end of the list without finding a
non-cancelled element, "tmp" will be a pointer into the list head, so the
tmp->canceled check is bogus. Use a flag instead.
Submitted by: Tao Liu <Tao.Liu@isilon.com>
Reviewed by: hselasky
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D3244
kmalloc() call. Make function global instead of static inline to fix
compiler warnings about passing variable argument lists to inline
functions.
MFC after: 1 week
Sponsored by: Mellanox Technologies
Use the same scheme implemented to manage credentials.
Code needing to look at process's credentials (as opposed to thred's) is
provided with *_proc variants of relevant functions.
Places which possibly had to take the proc lock anyway still use the proc
pointer to access limits.
with fresh firmware. The low level code is based on code provided by
Mellanox.
Thanks to Mellanox and their distributor Must (http://mustcompany.ru)
for providing hardware.
In collaboration with: Andre Melkoumian <andre mellanox.com>
Reviewed by: hselasky
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
years for head. However, it is continuously misused as the mpsafe argument
for callout_init(9). Deprecate the flag and clean up callout_init() calls
to make them more consistent.
Differential Revision: https://reviews.freebsd.org/D2613
Reviewed by: jhb
MFC after: 2 weeks
positive value since it adds the current tick to its result. This differs
from the behaviour in Linux, whose implementation does not add the extra
tick, so subtract the extra tick in the OFED compat layer implementation.
This addresses some incorrect handling of IB MAD timeouts, since some IB
code depends on msecs_to_jiffies(0) returning 0.
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
lies within the last block of the bit set and no bits are set beyond the
offset, terminate the search immediately instead of continuing as though
there are further blocks in the set and subsequently returning an incorrect
result.
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
is present in the tree. Otherwise there exists a window during which the
element could be removed by another thread, triggering an incorrect
assertion failure.
Reviewed by: jeff
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
- make sure the timeout computations are always above zero by using
the existing "linux_timer_jiffies_until()" function. Negative timeouts
can result in undefined behaviour.
- declare all completion functions like external symbols and move the
code to the LinuxAPI kernel module.
- add a proper prefix to all LinuxAPI kernel functions to avoid
namespace collision with other parts of the FreeBSD kernel.
- clean up header file inclusions in the linux/completion.h, linux/in.h
and linux/fs.h header files.
MFC after: 1 week
Sponsored by: Mellanox Technologies
conversion:
- The linux compat API layer casts the ticks to unsigned long which
might cause problems when the ticks value is negative.
- Guard against already expired ticks values, by checking if the
passed expiry tick is already elapsed.
- While at it avoid referring the address of an inlined function.
MFC after: 3 days
Sponsored by: Mellanox Technologies
drivers can use it. This avoids some code duplication. Add missing
default case to all switch statements while at it. Also move the
hashing of the IPv6 flow field to layer 4 because the IPv6 flow field
is constant on a per L4 connection basis and not on a per L3 network.
Differential Revision: https://reviews.freebsd.org/D1987
Sponsored by: Mellanox Technologies
MFC after: 1 month
> List of fixes:
* use correct format for GID printouts
* double array indexing
* spelling in printouts
* void pointer arithmetic
* allow more receive rings
* correct maximum number of transmit rings
* use "const" instead of "static" for constants
* check for invalid VLAN tags
* check for lack of IRQ resources
> Added more hardware specific defines
> Added more verbose printouts of firmware status codes
Sponsored by: Mellanox Technologies
MFC after: 3 days
by placing appropriate #ifdefs around otherwise unused variables
or sections with functions called which are not available without
IPv6 support in the kernel.
Introduce fget_fcntl which performs appropriate checks when needed.
This removes a branch from fget_unlocked.
Introduce fget_mmap dealing with cap_rights_to_vmprot conversion.
This removes a branch from _fget.
Modify fget_unlocked to pass sequence counter to interested callers so
that they can perform their own checks and make sure the result was
otained from stable & current state.
Reviewed by: silence on -hackers
this option from all modules that enable it theirselves.
In C mode -fms-extensions option enables anonymous structs and unions,
allowing us to use this C11 feature in kernel. Of course, clang supports
it without any extra options.
Reviewed by: dim
Highlights:
- Multiple verbs API updates
- Support for RoCE, RDMA over ethernet
All hardware drivers depending on the common infiniband stack has been
updated aswell.
Discussed with: np @
Sponsored by: Mellanox Technologies
MFC after: 1 month
FreeBSD developers need more time to review patches in the surrounding
areas like the TCP stack which are using MPSAFE callouts to restore
distribution of callouts on multiple CPUs.
Bump the __FreeBSD_version instead of reverting it.
Suggested by: kmacy, adrian, glebius and kib
Differential Revision: https://reviews.freebsd.org/D1438
"MODULE_VERSION" macro definition. Remove the redefinition of the
"MODULE_VERSION" macro from the Linux kernel compatibility API.
MFC after: 1 month
Reported by: np@
Sponsored by: Mellanox Technologies
by dumbbell@ to be able to compile this layer as a dependency module.
Clean up some Makefiles and remove the no longer used OFED define.
Currently only i386 and amd64 targets are supported.
MFC after: 1 month
Sponsored by: Mellanox Technologies
- Close a migration race where callout_reset() failed to set the
CALLOUT_ACTIVE flag.
- Callout callback functions are now allowed to be protected by
spinlocks.
- Switching the callout CPU number cannot always be done on a
per-callout basis. See the updated timeout(9) manual page for more
information.
- The timeout(9) manual page has been updated to reflect how all the
functions inside the callout API are working. The manual page has
been made function oriented to make it easier to deduce how each of
the functions making up the callout API are working without having
to first read the whole manual page. Group all functions into a
handful of sections which should give a quick top-level overview
when the different functions should be used.
- The CALLOUT_SHAREDLOCK flag and its functionality has been removed
to reduce the complexity in the callout code and to avoid problems
about atomically stopping callouts via callout_stop(). If someone
needs it, it can be re-added. From my quick grep there are no
CALLOUT_SHAREDLOCK clients in the kernel.
- A new callout API function named "callout_drain_async()" has been
added. See the updated timeout(9) manual page for a complete
description.
- Update the callout clients in the "kern/" folder to use the callout
API properly, like cv_timedwait(). Previously there was some custom
sleepqueue code in the callout subsystem, which has been removed,
because we now allow callouts to be protected by spinlocks. This
allows us to tear down the callout like done with regular mutexes,
and a "td_slpmutex" has been added to "struct thread" to atomically
teardown the "td_slpcallout". Further the "TDF_TIMOFAIL" and
"SWT_SLEEPQTIMO" states can now be completely removed. Currently
they are marked as available and will be cleaned up in a follow up
commit.
- Bump the __FreeBSD_version to indicate kernel modules need
recompilation.
- There has been several reports that this patch "seems to squash a
serious bug leading to a callout timeout and panic".
Kernel build testing: all architectures were built
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D1438
Sponsored by: Mellanox Technologies
Reviewed by: jhb, adrian, sbruno and emaste
- Remove unsupported "bus" field from "struct pci_dev".
- Fix logic inside "pci_enable_msix()" when the number of allocated
interrupts are less than the number of available interrupts.
- Update header files included from "list.h".
- Ensure that "idr_destroy()" removes all entries before destroying
the IDR root node(s).
- Set the "device->release" function so that we don't leak memory at
device destruction.
- Use FreeBSD's "log()" function for certain debug printouts.
- Put parenthesis around arguments inside the min, max, min_t and max_t macros.
- Make sure we don't leak file descriptors by dropping the extra file
reference counts done by the FreeBSD kernel when calling falloc()
and fget_unlocked().
MFC after: 1 week
Sponsored by: Mellanox Technologies
Without this fix, a kernel with VIMAGE + Infiniband will panic on bootup.
Certain necessary #include statements require LIST_HEAD.
Add these includes to ofed/include/linux/list.h, because
LIST_HEAD is specifically overridden in this file.
PR: 191468
Differential Revision: D1279
Reviewed by: hselasky
from the FreeBSD network code. The flag is still kept around in the
"sys/mbuf.h" header file, but does no longer have any users. Instead
the "m_pkthdr.rsstype" field in the mbuf structure is now used to
decide the meaning of the "m_pkthdr.flowid" field. To modify the
"m_pkthdr.rsstype" field please use the existing "M_HASHTYPE_XXX"
macros as defined in the "sys/mbuf.h" header file.
This patch introduces new behaviour in the transmit direction.
Previously network drivers checked if "M_FLOWID" was set in "m_flags"
before using the "m_pkthdr.flowid" field. This check has now now been
replaced by checking if "M_HASHTYPE_GET(m)" is different from
"M_HASHTYPE_NONE". In the future more hashtypes will be added, for
example hashtypes for hardware dedicated flows.
"M_HASHTYPE_OPAQUE" indicates that the "m_pkthdr.flowid" value is
valid and has no particular type. This change removes the need for an
"if" statement in TCP transmit code checking for the presence of a
valid flowid value. The "if" statement mentioned above is now a direct
variable assignment which is then later checked by the respective
network drivers like before.
Additional notes:
- The SCTP code changes will be committed as a separate patch.
- Removal of the "M_FLOWID" flag will also be done separately.
- The FreeBSD version has been bumped.
MFC after: 1 month
Sponsored by: Mellanox Technologies
sending not ready data:
o Add new flag to pru_send() flags - PRUS_NOTREADY.
o Add new protocol method pru_ready().
Sponsored by: Nginx, Inc.
Sponsored by: Netflix
