Allow output pins to be read and input pins to be set.
Fix bugs where we were trying to access the gpio softc before doing
device_get_softc.
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D6222
struct associated with some type defined in enum intr_map_data_type
must have struct intr_map_data on the top of its own definition now.
When such structs are used, correct type and size must be filled in.
There are three such structs defined in sys/intr.h now. Their
definitions should be moved to corresponding headers by follow-up
commits.
While this change was propagated to all INTRNG like PICs,
pic_map_intr() method implementations were corrected on some places.
For this specific method, it's ensured by a caller that the 'data'
argument passed to this method is never NULL. Also, the return error
values were standardized there.
64-bit MIPS, use superpage rather than physical-segment constants, or
we may improperly fail to apply suitable alignment -- yet still allow
mmap() to appear to succeed.
Reviewed by: sson
MFC after: 1 week
Sponsored by: DARPA, AFRL
Rescanning a PCI bus uses the following steps:
- Fetch the current set of child devices and save it in the 'devlist'
array.
- Allocate a parallel array 'unchanged' initalized with NULL pointers.
- Scan the bus checking each slot (and each function on slots with a
multifunction device).
- If a valid function is found, look for a matching device in the 'devlist'
array. If a device is found, save the pointer in the 'unchanged' array.
If a device is not found, add a new device.
- After the scan has finished, walk the 'devlist' array deleting any
devices that do not have a matching pointer in the 'unchanged' array.
- Finally, fetch an updated set of child devices and explicitly attach any
devices that are not present in the 'unchanged' array.
This builds on the previous changes to move subclass data management into
pci_alloc_devinfo(), pci_child_added(), and bus_child_deleted().
Subclasses of the PCI bus use custom rescan logic explicitly override the
rescan method to disable rescans.
Differential Revision: https://reviews.freebsd.org/D6018
The purpose of this file was to simply detect the UART speed before
attaching the actual ns8250 driver so that we don't have to specify the
UART speed in DTS files.
However, OpenWRT DTS files specify ns16550a as a compatible string in
their DTS files and this makes the original ns8250 driver attach to
the device. So we would have to edit the DTS files anyway and since this
is only the case for MT7621 and MT7628/MT7688 for now, it's better to
just add the clock-frequency property to those (UART is always clocked
by the same clock in both these SoCs, so that's fine) instead of having
a separate driver and still having to change the DTS files.
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D6044
This allows us to come closer to OpenWRT vanilla DTS files.
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D6045
This allows us to get closer to OpenWRT DTS files and minimize the diffs
a little more.
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D6042
rounddown2 tends to produce longer lines than the original code
and when the code has a high indentation level it was not really
advantageous to do the replacement.
This tries to strike a balance between readability using the macros
and flexibility of having the expressions, so not everything is
converted.
Only compile what each SoC needs and get rid of MEDIATEK generic config.
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D5996
This revision makes the mtk_gpio_v1 driver read its register map property
from the OpenWRT dts files.
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D6029
The driver can read and parse the OpenWRT pinctrl dts entries.
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D5999
OpenWRT's dts files treat RT3050/RT3052/RT3350 within the same SoC dtsi
file, so we need to distinguish between the three dynamically, mainly
because the bit we use to determine the clock speed on RT3050/RT3052
can actually be floating on RT3350 and RT3350 is always at 320MHz.
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D5983
Add suppport for passing boot arguments via FDT for mediatek/ralink SoCs.
This was taken from kan's work on CI20.
Since most OpenWRT dts files have bootargs defined, we use bsdbootargs
to specify FreeBSD specific arguments.
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D5979
Revision 298068 changed MIPS_INTRNG and ARM_INTRNG to simply INTRNG.
MEDIATEK_BASE config was missed by this revision, so we change
MIPS_INTRNG to INTRNG here.
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D5978
This revision gets our Mediatek/Ralink drivers closer to OpenWRT's dts
definitions, so we can reuse them with less modifications later in order
to bring support for a lot of boards at once.
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D5961
This is actually initialized properly within xhci.c, so it's better to
not initialize it in mtk_xhci.c
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D5935
the following:
1. Give the appropriate board dts file to be used by either:
1.1. edit the SoC kernel config required (e.g., MT7620A_FDT) and include
the required FDT_DTS_FILE makeoption; or
1.2. simply supply FDT_DTS_FILE="xx.dts" on the command line when building
the kernel
Of course, the user can also create a completely new kernel config to
match the desired board and include the SoC kernel config from within
it.
If required, edit the MEDIATEK config file, which includes optional
drivers and comment out the unneeded ones.
2.1. this would only make sense if kernel size is a concern. Even if we
build the kernel with all drivers, if we lzma it and package it as a uImage,
its size is still around 1.1MiB.
The user will have to choose a dts file (or create a new one) from
sys/gnu/dts/mips , where all Mediatek/Ralink dts files will be imported via
a later revision.
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D5966
The ACPI and OFW PCI bus drivers as well as CardBus override this to
allocate the larger ivars to hold additional info beyond the stock PCI ivars.
This removes the need to pass the size to functions like pci_add_iov_child()
and pci_read_device() simplifying IOV and bus rescanning implementations.
As a result of this and earlier changes, the ACPI PCI bus driver no longer
needs its own device_attach and pci_create_iov_child methods but can use
the methods in the stock PCI bus driver instead.
Differential Revision: https://reviews.freebsd.org/D5891
This revision introduces PCIe support for the relevant Mediatek/Ralink
SoCs.
Currently the PCIe support is not converted to INTRNG, this may be a
task for the future.
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D5886
Tested on a MT7621 board, similar to the WiTi board.
More testing will be required to confirm everything is fine, but things
look good so far.
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D5885
USB on both MT7621 and MT7688 seems to work much better without doing
slew rate calibration.
These are the only two SoCs, apart from MT7628, which actually make
use of the slew rate calibration routines implemented in the mtk_usb_phy
driver. Since MT7628 is actually a superset of MT7688 things should be
the same for it as well.
We do not remove the code, we simply define it out.
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D5884
In mtk_soc.c memory is mapped incorrectly for MT7621. This revision fixes
this.
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D5882
GPIO controller drivers import.
As with other Ralink/Mediatek work, there are 2 versions of the GPIO
controller driver, depending on the type of SoC.
This revision introduces initial support for these.
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D5877
SPI drivers for the various Ralink/Mediatek SoCs. There are 2 versions of
the SPI controller (so far) present in the supported SoCs, hence v1 and v2
drivers.
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D5842
USB support
This revision adds USB (EHCI/OHCI/OTG, depending on SoC type) support for
various Ralink/Mediatek SoCs.
Currently USB is not supported on MT7621, this will be a future addition.
A USB PHY driver is also included, so that we can properly initialize the
USB PHY (e.g., clocks, resets, registers where needed), before attempting
to initialize EHCI/OHCI/OTG functionality.
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D5841
UART drivers.
- uart_dev_mtk.[ch] are the old-style Mediatek/Ralink-specific UART driver
as also found in sys/mips/rt305x/uart_dev_rt305x.c, with minor improvements
and FDT attachment enabled for the appropriate SoCs.
- uart_dev_mtk_ns8250.c is the new-style ns16550a-compatible UART driver
found in newer Mediatek SoCs. It uses the uart_dev_ns8250.c driver
indirectly and is basically just a wrapper around it and only overrides its
probe method.
The reason I am not using the uart_dev_ns8250.c driver directly is because
I have some code that does UART clock detection before initializing the
UART, so that we don't need to hard-code the UART clock frequency in the
dts files for each board.
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D5840
Interrupt controllers found in various Mediatek/Ralink SoCs.
mtk_intr_v1 and mtk_intr_v2 are basically the same at the moment, with
just different register mappings.
However, v1 interrupt controller has a subset of the functionality of the
v2 interrupt controller, so in the future the v2 interrupt controller driver
may be enhanced, if needed, with things like level/edge interrupts and soft
interrupts. So, for the moment I suggest we keep them as 2 separate files.
mtk_intr_gic provides very basic (similar to v1 and v2) support for MIPS GIC
controllers, which currently maps all interrupts to a single core and sets
them to type level, active high. In the future this may be developed into a
generic GIC controller to support any new MIPS SoCs that include it. The GIC
is a standard MTI interrupt controller in their multi-core line-up (e.g.,
1004K, 1074K, etc.), rather than a SoC-specific controller.
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D5839
This revision adds the following to the Mediatek/Ralink support:
- initial support for "clocks" FDT property, currently based on fdt_clock
- initial support for "resets" FDT property, currently based on the
fdt_reset interface from D5826
- initial support for "pinctrl,bits" functionality via FDT. May be extended
in the future to cover a better and fuller pinctrl implementation
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D5827
- machine dependent low level init code
- SoC clocks detection and some utility functions
- Common interface to read/write/modify SoC system control registers, used
by some of the other drivers and utility functions
- simple FDT resets support, based on the fdt_clock implementation already
in the tree. For the moment resets and clocks are managed using these
implementations. I am planning to port those to the new extres framework
in the future, but currently I simply don't have time to do this part too.
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D5826
On some architectures, u_long isn't large enough for resource definitions.
Particularly, powerpc and arm allow 36-bit (or larger) physical addresses, but
type `long' is only 32-bit. This extends rman's resources to uintmax_t. With
this change, any resource can feasibly be placed anywhere in physical memory
(within the constraints of the driver).
Why uintmax_t and not something machine dependent, or uint64_t? Though it's
possible for uintmax_t to grow, it's highly unlikely it will become 128-bit on
32-bit architectures. 64-bit architectures should have plenty of RAM to absorb
the increase on resource sizes if and when this occurs, and the number of
resources on memory-constrained systems should be sufficiently small as to not
pose a drastic overhead. That being said, uintmax_t was chosen for source
clarity. If it's specified as uint64_t, all printf()-like calls would either
need casts to uintmax_t, or be littered with PRI*64 macros. Casts to uintmax_t
aren't horrible, but it would also bake into the API for
resource_list_print_type() either a hidden assumption that entries get cast to
uintmax_t for printing, or these calls would need the PRI*64 macros. Since
source code is meant to be read more often than written, I chose the clearest
path of simply using uintmax_t.
Tested on a PowerPC p5020-based board, which places all device resources in
0xfxxxxxxxx, and has 8GB RAM.
Regression tested on qemu-system-i386
Regression tested on qemu-system-mips (malta profile)
Tested PAE and devinfo on virtualbox (live CD)
Special thanks to bz for his testing on ARM.
Reviewed By: bz, jhb (previous)
Relnotes: Yes
Sponsored by: Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D4544
is the physical memory size so may be larger than a u_long can hold, e.g.
on ARM with LPAE we could see an address space of up to 40 bits. On ARM
u_long is only 32 bits so the memory size will be truncated, possibly to
zero.
Reported by: bz
Sponsored by: ABT Systems Ltd
Summary:
As part of the migration of rman_res_t to be typed to uintmax_t, memory ranges
must be clamped appropriately for the bus, to prevent completely bogus addresses
from being used.
This is extracted from D4544.
Reviewed By: cem
Sponsored by: Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D5134
Use u_long instead of uint32_t variables to avoid overflow
in case of PA space bigger than 32-bit.
Obtained from: Semihalf
Submitted by: Michal Stanek <mst@semihalf.com>
Sponsored by: Annapurna Labs
Approved by: cognet (mentor)
Reviewed by: andrew, br, wma
Differential revision: https://reviews.freebsd.org/D5393
This simplifies checking for default resource range for bus_alloc_resource(),
and improves readability.
This is part of, and related to, the migration of rman_res_t from u_long to
uintmax_t.
Discussed with: jhb
Suggested by: marcel
will allow for code that uses the old fdt_get_range and fdt_regsize
functions to find a range, map it, access, then unmap to replace this, up
to and including the map, with a call to OF_decode_addr.
As this function should only be used in the early boot code the unmap is
mostly do document we no longer need the mapping as it's a no-op, at least
on arm.
Reviewed by: jhibbits
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D5258
ucontext_t available. Our code even has XXX comment about this.
Add a bit of compliance by moving struct __ucontext definition into
sys/_ucontext.h and including it into signal.h and sys/ucontext.h.
Several machine/ucontext.h headers were changed to use namespace-safe
types (like uint64_t->__uint64_t) to not depend on sys/types.h.
struct __stack_t from sys/signal.h is made always visible in private
namespace to satisfy sys/_ucontext.h requirements.
Apparently mips _types.h pollutes global namespace with f_register_t
type definition. This commit does not try to fix the issue.
PR: 207079
Reported and tested by: Ting-Wei Lan <lantw44@gmail.com>
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
pmap_unmapdev respectively) so that resources are properly managed.
This is work originally done by kan@. Stanislav picked it up as part
of his Mediatek SoC work.
Tested:
* Carambola2, AR933x SoC
Submitted by: Stanislav Galabov <sgalabov@gmail.com>
Reviewed by: kan
Differential Revision: https://reviews.freebsd.org/D5184
This was originall done by kan@.
Submitted by: Stanislav Galabov <sgalabov@gmail.com>
Reviewed by: kan
Differential Revision: https://reviews.freebsd.org/D5184
This is a prelude to intr-ng support for MIPS boards that need it -
notably the CI20 port from kan@ that's upcoming, but also work that
Stanislav is doing for the Mediatek platforms.
This is the initial platform dependent bits in include/intr.h, some
#defines for the nexus code for the intrng initialisation/runtime
bits, some changed naming (which I'll fix later to be the same, much
like what I did for ARM intr-ng) in exception.S, and the first cut
at a PIC.
Stanislav and I refactored out the common code for intrng support,
so the mips intrng definitions are quite small (sys/mips/include/intr.h.)
This is all work done by kan@, which stanislav has been cherry picking
into common code for his mediatek chipset work.
Tested:
* Carambola2 - no regressions (not intr-ng though!)
Submitted by: Stanislav Galabov <sgalabov@gmail.com>
Reviewed by: kan (original author)
Differential Revision: https://reviews.freebsd.org/D5182
clearing hazards.
This revision makes currently known MIPS32 Release 2 and Release 3 CPUs use
the EHB instruction when clearing hazards. So far the MIPS 74K and MIPS1004K
(somewhat) were already using the EHB. Now we add more r2 and r3 CPUs to
this list.
Also, for the cases of MIPS coherent processing systems (currently 1004K,
1074K, interAptiv and proAptiv) - define proper CCA attributes.
Submitted by: Stanislav Galabov <sgalabov@gmail.com>
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D5078
This revision does the following renames:
CPU_MIPS24KC -> CPU_MIPS24K
CPU_MIPS74KC -> CPU_MIPS74K
CPU_MIPS1004KC -> CPU_MIPS1004K
It also adds the following new CPU_MIPSxxx options:
CPU_MIPS24KE, CPU_MIPS34K, CPU_MIPS1074K, CPU_INTERAPTIV, CPU_PROAPTIV
CPU_MIPSxxxxKC is limiting and possibly misleading as it implies the
MIPSxxxxK CPU has no FPU.
It would be better if the CPUs are named after their standard functionalities
only and the presence or absence of FPU can then be controlled via the
CPU_HAVEFPU option.
I will send out another dependent revision that moves MIPS 32 r2 and r3
CPUs to use the EHB instruction for clearing hazards instead of NOP/SSNOP.
Submitted by: Stanislav Galabov <sgalabov@gmail.com>
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D5077
Use driver settable callbacks for handling of:
- core post reset
- reading actual port speed
Typically, OTG enabled EHCI cores wants setting of USBMODE register,
but this register is not defined in EHCI specification and different
cores can have it on different offset.
Also, for cores with TT extension, actual port speed must be determinable.
But again, EHCI specification not covers this so this patch provides
function for two most common variant of speed bits layout.
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D5088
POSIX requires these members to be of type void * rather than the
char * inherited from 4BSD. NetBSD and OpenBSD both changed their
fields to void * back in 1998. No new build failures were reported
via an exp-run.
PR: 206503 (exp-run)
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D5092
Summary:
Migrate to using the semi-opaque type rman_res_t to specify rman resources. For
now, this is still compatible with u_long.
This is step one in migrating rman to use uintmax_t for resources instead of
u_long.
Going forward, this could feasibly be used to specify architecture-specific
definitions of resource ranges, rather than baking a specific integer type into
the API.
This change has been broken out to facilitate MFC'ing drivers back to 10 without
breaking ABI.
Reviewed By: jhb
Sponsored by: Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D5075
providing compiled-in static environment data that is used instead of any
data passed in from a boot loader.
Previously 'env' worked only on i386 and arm xscale systems, because it
required the MD startup code to examine the global envmode variable and
decide whether to use static_env or an environment obtained from the boot
loader, and set the global kern_envp accordingly. Most startup code wasn't
doing so. Making things even more complex, some mips startup code uses an
alternate scheme that involves calling init_static_kenv() to pass an empty
buffer and its size, then uses a series of kern_setenv() calls to populate
that buffer.
Now all MD startup code calls init_static_kenv(), and that routine provides
a single point where envmode is checked and the decision is made whether to
use the compiled-in static_kenv or the values provided by the MD code.
The routine also continues to serve its original purpose for mips; if a
non-zero buffer size is passed the routine installs the empty buffer ready
to accept kern_setenv() values. Now if the size is zero, the provided buffer
full of existing env data is installed. A NULL pointer can be passed if the
boot loader provides no env data; this allows the static env to be installed
if envmode is set to do so.
Most of the work here is a near-mechanical change to call the init function
instead of directly setting kern_envp. A notable exception is in xen/pv.c;
that code was originally installing a buffer full of preformatted env data
along with its non-zero size (like mips code does), which would have allowed
kern_setenv() calls to wipe out the preformatted data. Now it passes a zero
for the size so that the buffer of data it installs is treated as
non-writeable.
These are all works in progress. Notably - no wifi support just yet!
I've booted the MT7620 on a TP-Link Archer C2 via tftpboot.
Submitted by: Stanislav Galabov <sgalabov@gmail.com>
* Add in chipset awareness to the obio bus layout (ie, which devices are
where);
* Add in some USB OTG changes to be aware of the newer stuff;
* Add in a configurable primary console - some chips use the normal UART,
some use UARTLITE.
Tested (by Stanislav);
* RT3050 (NFS)
* RT5350 (NFS, MFS)
* MT7620 (USB)
Submitted by: Stanislav Galabov <sgalabov@gmail.com>
The Ingenic JZ7480 SoC that is on the Imagination Technologies CI20 board
has an L2 cache:
Cache info:
picache_stride = 4096
picache_loopcount = 8
pdcache_stride = 4096
pdcache_loopcount = 8
cpu0: Ingenic Xburst processor v79.2
MMU: Standard TLB, 32 entries
L1 i-cache: 8 ways of 128 sets, 32 bytes per line
L1 d-cache: 8 ways of 128 sets, 32 bytes per line
L2 cache: 8 ways of 256 sets, 128 bytes per line, 256 KiB total size
Config1=0xbe67338b<WatchRegs,EJTAG,FPU>
Config2=0x80000267
Config3=0x20
is what includes machine/ofw_machdep.h. Don't declare OF_decode_addr();
it isn't implemented yet on mips and the declaration for it is about to
be commonized into openfirm.h.
address and use this mechanism when:
1. kmem_alloc_{attr,contig}() can't find suitable free pages in the physical
memory allocator's free page lists. This replaces the long-standing
approach of scanning the inactive and inactive queues, converting clean
pages into PG_CACHED pages and laundering dirty pages. In contrast, the
new mechanism does not use PG_CACHED pages nor does it trigger a large
number of I/O operations.
2. on 32-bit MIPS processors, uma_small_alloc() and the pmap can't find
free pages in the physical memory allocator's free page lists that are
covered by the direct map. Tested by: adrian
3. ttm_bo_global_init() and ttm_vm_page_alloc_dma32() can't find suitable
free pages in the physical memory allocator's free page lists.
In the coming months, I expect that this new mechanism will be applied in
other places. For example, balloon drivers should use relocation to
minimize fragmentation of the guest physical address space.
Make vm_phys_alloc_contig() a little smarter (and more efficient in some
cases). Specifically, use vm_phys_segs[] earlier to avoid scanning free
page lists that can't possibly contain suitable pages.
Reviewed by: kib, markj
Glanced at: jhb
Discussed with: jeff
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D4444
This is a holdover from how reset is handled in the ARGE_MDIO world.
You need to define the mdio bus device if you want to use the ethernet
device or the arge setup path doesn't bring the MAC out of reset.
http://www.t-es-t.hu/download/mips/md00090c.pdf this is bit 3 of the
config0 word, not bit 2. This should fix virtually indexed caches
(relatively new in the MIPS world, so no current platforms used this
and current code just uses it as an optimization). It was causing
false positives on newer platforms that default to large values for
the kseg0 cache coherency attribute.
Submitted by: Stanislav Galabov
PR: 205249
These helper functions can be used to read in or write a buffer from or to
an arbitrary process' address space. Without them, this can only be done
using proc_rwmem(), which requires the caller to fill out a uio. This is
onerous and results in code duplication; the new functions provide a simpler
interface which is sufficient for most existing callers of proc_rwmem().
This change also adds a manual page for proc_rwmem() and the new functions.
Reviewed by: jhb, kib
Differential Revision: https://reviews.freebsd.org/D4245
sysent.
sv_prepsyscall is unused.
sv_sigsize and sv_sigtbl translate signal number from the FreeBSD
namespace into the ABI domain. It is only utilized on i386 for iBCS2
binaries. The issue with this approach is that signals for iBCS2 were
delivered with the FreeBSD signal frame layout, which does not follow
iBCS2. The same note is true for any other potential user if
sv_sigtbl. In other words, if ABI needs signal number translation, it
really needs custom sv_sendsig method instead.
Sponsored by: The FreeBSD Foundation
created for bus_dma_tag_t tag, bounce pages should be allocated
only if needed.
Before the fix, they were allocated always if BUS_DMA_COULD_BOUNCE flag
was set but BUS_DMA_MIN_ALLOC_COMP not. As bounce pages are never freed,
it could cause memory exhaustion when a lot of such tags together with
their maps were created.
Note that there could be more maps in one tag by current design.
However BUS_DMA_MIN_ALLOC_COMP flag is tag's flag. It's set after
bounce pages are allocated. Thus, they are allocated only for first
tag's map which needs them.
Approved by: kib (mentor)
Extended memory here is "physical memory above 256MB".
"memsize" in the environment only grows to 256MB; "ememsize" is the entire
memory range. Extended memory shows up at physical address 0x90000000.
This allows for malta64 VMs to be created with > 256MB RAM, all the way
up to 2GB RAM.
Tested:
* qemu-devel package; qemu-system-mips64 -m 2048 (and -m 256 to test the
no-ememsize case.)
TODO:
* testing mips32 with > 256MB RAM.
Reviewed by: imp
for the AP143.
Wifi doesn't work on the QCA9533 board, but basic ethernet/ethernet
and ethernet switch support does work.
The AP143 has 32MB RAM and 4MB flash, so this was tested with a USB
rootfs.
Tested:
* QCA9533v2, AP143 reference design board.
Small $25 IoT device, 400mhz Atheros cpu, Atheros WiFi and Ethernet
18 GPIOs, and support for Relay, Servo, and OLED expansion
https://onion.io/omega/
Reviewed by: adrian
Approved by: bapt (mentor)
Relnotes: yes
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D4188
The QCA953x SoC is an integrated 2x2 2GHz 11n + MIPS24k core, with
a 5 port FE switch, gige WAN port, and all the same stuff you'd find on
its predecessor - the AR9331.
However, buried deep in here somewhere is also a PCIe EP/RC for various
applications and some other weird bits I don't yet know about.
This is enough to get the reference board up and booting. I haven't yet
had it pass lots of packets - I need to finalise the ethernet switch
bits and the GMAC configuration (ie, how the ethernet ports and switch
are wired up) and I'll bring that in when I commit the base configuration
files to use the thing.
The wifi stuff will come much later. I have to port that support from
Linux ath9k and extend our vendor HAL to support it.
The reference board (AP143) comes with 32MB RAM and 4MB flash, so in order
to use it I need to get USB working fully so I can run root from there.
Thankyou to Qualcomm Atheros for access to the reference design board.
Details:
* Add register definitions from openwrt;
* It looks like a QCA955x but shrunk down to a QCA933x footprint, so
use the QCA955x bits and fix up the clock detection code to do the
QCA953x bits (they're very subtly different);
* Teach GPIO about it;
* Teach EHCI about it;
* Teach if_arge about it;
* Teach the CPU detection code about it.
Tested:
* AP143, QCA9533v2 SoC
Obtained from: Linux, Linux OpenWRT
I discovered that we're logging each trap, which gets pretty spendy;
and there wasn't any further information on the pid/tid/progname involved.
I originally noticed this because I don't attach anything to /dev/log and so
the log() output stays going to the kernel. That's an oops on my part, but
I'm glad I did it.
This commit adds the following:
* a rate limiter, which could do with some eyeballs/ideas on how to
make it more predictable on SMP;
* log pid, tid, progname (comm) as part of the output.
I now get output like this:
Unaligned Load Word: pid=621 (pmcstat), tid=100060, pc=0xffffffff803ae898, badvaddr=0x40a10055
Unaligned Load Word: pid=621 (pmcstat), tid=100060, pc=0xffffffff803ae898, badvaddr=0x40a10051
Unaligned Load Word: pid=621 (pmcstat), tid=100060, pc=0xffffffff803ae898, badvaddr=0x40a1004d
Unaligned Load Word: pid=602 (login), tid=100042, pc=0xffffffff803ae898, badvaddr=0x401159
Unaligned Load Word: pid=602 (login), tid=100042, pc=0xffffffff803ae898, badvaddr=0x401155
Unaligned Load Word: pid=602 (login), tid=100042, pc=0xffffffff803ae898, badvaddr=0x401151
.. which makes it much easier to start figuring out what/where to fix.
The pc looks suss (it looks like it's in kernel space); I'll dig into that one next.
Tested:
* AR9331 SoC (Carambola2)
mips24k/mips74k document that we need an explicit SYNC so to order
things correctly, even with access to uncachable memory.
We were doing calls to SYNC in the cache ops (inv, wbinv) but we
weren't doing it for uncachable memory.
When I ported this code from netbsd I was .. slightly mips74k greener.
I used writethrough because (a) it's what netbsd did, and (b) if I used
writethrough then things "didn't work."
Fast-forward a couple years, more MIPS hacking and a whole lot more
understanding of the bus APIs (the last few commits notwithstanding;
it's been a long week, ok?) and I have this working for arge,
argemdio, spi and ath. Hans has it working for USB. The ath barrier
code will come in a later commit.
This gets the routing throughput up from 220mbit -> 337mbit.
I'm sure the bridging throughput will be similarly improved.
Tested:
* QCA955x SoC, routing workload.
* use barriers in a slightly better fashion. You can blame this
glass of whiskey on putting barriers in the wrong spot. Grr adrian.
* steal/rewrite the mdio busy check from ag7100 from openwrt and
refactor the existing code out. This is .. more correct.
This seems to fix the boot-to-boot variation that I've been seeing
and it quietens the switch port status flapping.
Tested:
* QCA9558 SoC (AP135.)
Obtained from: Linux OpenWRT
This driver and the linux ag71xx driver both treat the transmit ring
as a circular linked list of descriptors. There's no "end" pointer
that is ever NULL - instead, it expects the MAC to hit a finished
descriptor (ARGE_DESC_EMPTY) and stop.
Now, since it's a circular buffer, we may end up with the hardware
hitting the beginning of our multi-descriptor frame before we've finished
setting it up. It then DMA's it in, starts sending it, and we finish
writing out the new descriptor. The hardware may then write its
completion for the next descriptor out; then we do, and when we next
read it it'll show up as "not done" and transmit completion stops.
This unfortunately manifests itself as the transmit queue always
being active and a massive TX interrupt storm. We need to actively
ACK packets back from the transmit engine and if we don't (eg because
we think the transmit isn't finished but it is) then the unit will
just keep generating interrupts.
I hit this finally with the below testing setup. This fixed it for me.
Strictly speaking I should put in a sync in between writing out all of
the descriptors and writing out that final descriptor.
Tested:
* QCA9558 SoC (AP135 reference board) w/ arge1 + vlans acting as a
router, and iperf -d (tcp, bidirectional traffic.)
Obtained from: Linux OpenWRT (ag71xx_main.c.)
The MIPS busdma sync operations currently are a big no-op on coherent memory.
This isn't strictly correct behaviour as we need a SYNC in here to ensure that
the writes have finished and are visible in main memory before the MMIO accesses
occur. This will have to be addressed in a later commit.
But, before that happens, let's at least do a flush here to make things
more "correct".
This is required for even remotely sensible behaviour on mips74k with
write-through memory enabled.
The mips74k programmers guide notes that reads can be re-ordered, even
uncached ones, so we need an explicit SYNC between them.
Yes, this is a case of a driver author actively doing a bus barrier
operation.
This ends up being necessary when the mips74k core is run in write-back
mode rather than write-through mode. That's coming in an upcoming
commit.
Tested:
* mips74k, QCA9558 SoC (AP135 reference board), arge<->arge interface
routing traffic tests.
send frames.
This matches the other check for space.
"enough" is a misnomer, for "reasons". The biggest reason is that
the TX ring is actually a circular linked list, with no head/tail pointers.
This is just a bit more headroom between head/tail so we have time to
schedule frames before we hit where the hardware is at.
Ideally this would be tunable and a little larger.
This flushes out the write to the system before anything continues.
The mips74k guide, chapter 3.3.3 (write gathering) notes that writes
can be buffered in FIFOs - even uncached ones - so we can't guarantee
the device has felt its effects. Now, since we're all lazy driver
authors and don't pepper read/write barriers everywhere, fake it here.
tested:
* mips74k - QCA9558 SoC (AP135 reference board)
This should make it easier to track down interrupt storms from arge.
Tested:
* AP135 (QCA955x) SoC - defaults to ARGE_DEBUG enabled
* Carambola2 (AR9331 SoC) - defaults to ARGE_DEBUG disabled
I couldn't test arge0->arge1 bridging, only arge0 VLAN bridging.
The DIR-825C1 only hooks up arge0 to the switch GMAC0 and so
you need to abuse VLANs to test.
Tested:
* DIR-825C1 (AR9344)
This is an AR9331 part based on the AP121 reference design but with
32MB RAM. Yes, it has 4MB flash and it has no USB, so clever hacks
are required to get it up and working.
But boot/work it does.
This part seems to work bug-free with single byte TX/RX buffer alignment.
This drops the CPU requirement to bridge 100mbit iperf from 100% CPU
to ~ 50% CPU.
Tested:
* AP121 (AR9330) SoC, highly magic netbooted kernel + USB rootfs
due to 4mb flash, 16mb RAM; doing bridging between arge0 and arge1.
Notes:
* Yes, I likely can also turn this on for the AR934x SoC family now.
But since hardware design apparently follows similar branching
strategies to software design, I'll go and make sure all the AR934x's
that made it out into shipping products work before I flip it on.
offset within the buffer to align the L3 headers we know the buffer itself
was allocated and sized on cacheline boundaries and we don't need to
preserve partitial cachelines at the start and end of the buffer when
doing busdma sync operations.
to copying in some code from the armv4 busdma, and adapting a few variable
and flag names to match the surrounding mips code.
Instead of keeping a local cache of prealloced busdma_map structs on a
mutex-protected list, set up an uma zone to cache them.
Instead of all memory allocations using M_DEVBUF, use new categories
M_BUSDMA for allocations of metadata (tags, maps, segment tracking lists),
and M_BOUNCE for bounce pages.
When buffers are allocated out of the busdma_bufalloc zones the alignment
and size of the buffers is known, and the code can skip doing any "partial
cacheline flush" logic to preserve data that may be adjacent to the DMA
buffer but contain non-DMA data.
Reviewed by: adrian, imp
and implement support for VM_MEMATTR_UNCACHEABLE. This will be used in
upcoming changes to support BUS_DMA_COHERENT in bus_dmamem_alloc().
Reviewed by: adrian, imp
This was triggering when using it as an AP bridge rather than an ethernet
bridge.
The code is unclear but it works; I'll fix it to be clearer and test
performance at a later stage.
The existing code meets the "alignment" requirement for the l3 payload
by offsetting the mbuf by uint64_t and then calling an rx fixup routine
to copy the frame backwards by 2 bytes. This DWORD aligns the
L3 payload so tcp, etc doesn't panic on unaligned access.
This is .. slow.
For arge MACs that support 1 byte TX/RX address alignment, we can do
the "other" hack: offset the RX address of the mbuf so the L3 payload
again is hopefully DWORD aligned.
This is much cheaper - since TX/RX is both 1 byte align ready (thanks
to the previous commit) there's no bounce buffering going on and there
is no rx fixup copying.
This gets bridging performance up from 180mbit/sec -> 410mbit/sec.
There's around 10% of CPU cycles spent in _bus_dmamap_sync(); I'll
investigate that later.
Tested:
* QCA955x SoC (AP135 reference board), bridging arge0/arge1
by programming the switch to have two vlangroups in dot1q mode:
# ifconfig bridge0 inet 192.168.2.20/24
# etherswitchcfg config vlan_mode dot1q
# etherswitchcfg vlangroup0 members 0,1,2,3,4
# etherswitchcfg vlangroup1 vlan 2 members 5,6
# etherswitchcfg port5 pvid 2
# etherswitchcfg port6 pvid 2
# ifconfig arge1 up
# ifconfig bridge0 addm arge1
The early ethernet MACs (I think AR71xx and AR913x) require that both
TX and RX require 4-byte alignment for all packets.
The later MACs have started relaxing the requirements.
For now, the 1-byte TX and 1-byte RX alignment requirements are only for
the QCA955x SoCs. I'll add in the relaxed requirements as I review the
datasheets and do testing.
* Add a hardware flags field and 1-byte / 4-byte TX/RX alignment.
* .. defaulting to 4-byte TX and 4-byte RX alignment.
* Only enforce the TX alignment fixup if the hardware requires a 4-byte
TX alignment. This avoids a call to m_defrag().
* Add counters for various situations for further debugging.
* Set the 1-byte and 4-byte busdma alignment requirement when
the tag is created.
This improves the straight bridging performance from 130mbit/sec
to 180mbit/sec, purely by removing the need for TX path bounce buffers.
The main performance issue is the RX alignment requirement and any RX
bounce buffering that's occuring. (In a local test, removing the RX
fixup path and just aligning buffers raises the performance to above
400mbit/sec.
In theory it's a no-op for SoCs before the QCA955x.
Tested:
* QCA9558 SoC in AP135 board, using software bridging between arge0/arge1.
The ERL is a fairly cheap (~$100 USD) and readily available dual core
MIPS64 device so it makes a useful MIPS reference platform.
This is based in part on the kernel config generated by the mkerlimage
script from http://rtfm.net/FreeBSD/ERL/.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3884
* Shuffle the kernel to be at the beginning
* Give the kernel 2mb, the rootfs 6mb, and 'mib0' the rest
* put the cfg parition just before the ART calibration data for the
wifi part in the SoC
* .. and make sure ART points to the right 64k region.
I've updated the freebsd-wifi-build wiki the instructions on using this.
If someone has an AP135 with 8MB SPI flash then this won't work; everything
minus the big mib0 partition is just a bit over 8MB. Come see me if this
ever happens (you'll likely just have to shrink the rootfs and the kernel
a little in order to make it fit.)
Tested:
* AP135 reference board.
belong to a vm object, they can't be paged out. Since they can't be paged
out, they are never enqueued in a paging queue. Nonetheless, passing
PQ_INACTIVE to vm_page_unwire() creates the appearance that these pages
are being enqueued in the inactive queue. As of r288122, we can avoid
this false impression by passing PQ_NONE.
Submitted by: kmacy (an earlier version)
Differential Revision: https://reviews.freebsd.org/D1674
linkers no longer raise an error when undefined weak symbols are
found, but relocate as if the symbol value was 0. Note that we do not
repeat the mistake of userspace dynamic linker of making the symbol
lookup prefer non-weak symbol definition over the weak one, if both
are available. In fact, kernel linker uses the first definition
found, and ignores duplicates.
Signature of the elf_lookup() and elf_obj_lookup() functions changed
to split result/error code and the symbol address returned.
Otherwise, it is impossible to return zero address as the symbol
value, to MD relocation code. This explains the mechanical changes in
elf_machdep.c sources.
The powerpc64 R_PPC_JMP_SLOT handler did not checked error from the
lookup() call, the patch leaves the code as is (untested).
Reported by: glebius
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
When the system has more than a single PCI domain, the bus numbers
are not unique, thus they cannot be used for "pci" device numbering.
Change bus numbers to -1 (i.e. to-be-determined automatically)
wherever the code did not care about domains.
Reviewed by: jhb
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3406
running thread.
It is currently implemented only on amd64 and i386; on these
architectures, it is implemented by raising an NMI on the CPU on which
the target thread is currently running. Unlike stack_save_td(), it may
fail, for example if the thread is running in user mode.
This change also modifies the kern.proc.kstack sysctl to use this function,
so that stacks of running threads are shown in the output of "procstat -kk".
This is handy for debugging threads that are stuck in a busy loop.
Reviewed by: bdrewery, jhb, kib
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D3256
The only operation which is prevented by the hold is the kernel stack
swapout for the faulted thread, which should be fine to allow.
Remove useless checks for NULL curproc or curproc->p_vmspace from the
trap_pfault() wrappers on x86 and powerpc.
Reviewed by: alc (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
nlge(4) is supposed to deprecate rge(4) for Broadcom XLR when it was
introduced 5 years ago.
rge doesn't build on -CURRENT due to MII changes. All the XLR kernel confs
use nlge. Let's get rid of the old driver for FreeBSD 11. We can use
10-STABLE or SVN to go back and look at the old driver if needed.
Differential Revision: https://reviews.freebsd.org/D3339
Submitted by: kevin.bowling@kev009.com
Add a check to preload_search_info to make sure mod is set. Most of the
callers of preload_search_info don't check that the mod parameter is
set, which can cause page faults. While at it, remove some now unnecessary
checks before calling preload_search_info.
Sponsored by: Citrix Systems R&D
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D3440
vm_offset_t pmap_quick_enter_page(vm_page_t m)
void pmap_quick_remove_page(vm_offset_t kva)
These will create and destroy a temporary, CPU-local KVA mapping of a specified page.
Guarantees:
--Will not sleep and will not fail.
--Safe to call under a non-sleepable lock or from an ithread
Restrictions:
--Not guaranteed to be safe to call from an interrupt filter or under a spin mutex on all platforms
--Current implementation does not guarantee more than one page of mapping space across all platforms. MI code should not make nested calls to pmap_quick_enter_page.
--MI code should not perform locking while holding onto a mapping created by pmap_quick_enter_page
The idea is to use this in busdma, for bounce buffer copies as well as virtually-indexed cache maintenance on mips and arm.
NOTE: the non-i386, non-amd64 implementations of these functions still need review and testing.
Reviewed by: kib
Approved by: kib (mentor)
Differential Revision: http://reviews.freebsd.org/D3013
provide a semantic defined by the C11 fences with corresponding
memory_order.
atomic_thread_fence_acq() gives r | r, w, where r and w are read and
write accesses, and | denotes the fence itself.
atomic_thread_fence_rel() is r, w | w.
atomic_thread_fence_acq_rel() is the combination of the acquire and
release in single operation. Note that reads after the acq+rel fence
could be made visible before writes preceeding the fence.
atomic_thread_fence_seq_cst() orders all accesses before/after the
fence, and the fence itself is globally ordered against other
sequentially consistent atomic operations.
Reviewed by: alc
Discussed with: bde
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
and start teaching subsystems about it.
The Atheros MIPS platforms don't guarantee any kind of FIFO consistency
with interrupts in hardware. So software needs to do a flush when it
receives an interrupt and before it calls the interrupt handler.
There are new ones for the QCA934x and QCA955x, so do a few things:
* Get rid of the individual ones (for ethernet and IP2);
* Create a mux and enum listing all the variations on DDR flushes;
* replace the uses of IP2 with the relevant one (which will typically
be "PCI" here);
* call the USB DDR flush before calling the real USB interrupt handlers;
* call the ethernet one upon receiving an interrupt that's for us,
rather than never calling it during operation.
Tested:
* QCA9558 (TP-Link archer c7 v2)
* AR9331 (Carambola 2)
TODO:
* PCI, USB, ethernet, etc need to do a double-check to see if the
interrupt was truely for them before doing the DDR. For now I
prefer "correct" over "fast".
The SoC, the flash, the ethernet ports and ethernet switch all work.
The USB works.
The 11ac PCIe NIC internally is at least seen by the PCIE RC, but
I haven't tried using it yet. There's no driver and I haven't
yet swapped it out for a non-11ac chip.
The on-chip 2GHz wifi works, but there are some data errors that
get thrown up in STA mode when scanning. I have a feeling I have
to finish the DDR flush code out and have it run correctly on the
shared interrupts; that'll take a bit of time to get right.
But if you're after an updated piece of hardware, the Archer C7 v2
is certainly there, and you can replace the 11ac NIC with a 3x3
Atheros PCIe device (eg AR9380, AR9390, AR9580, etc) and it'll
"just work".
Tested:
* TP-Link archer c7v2.
The Tp-link Archer-C7v2 unit has a QCA9558 internally but hangs the
QCA988x 11ac PCIe NIC off of PCI RC #1, not #0.
So I actually finally /do/ have a board to verify whether PCIe is working.
Grr.
Tested:
* TP-Link Archer-C7v2.
* GENERAL
- Update copyright.
- Make kernel options for RANDOM_YARROW and RANDOM_DUMMY. Set
neither to ON, which means we want Fortuna
- If there is no 'device random' in the kernel, there will be NO
random(4) device in the kernel, and the KERN_ARND sysctl will
return nothing. With RANDOM_DUMMY there will be a random(4) that
always blocks.
- Repair kern.arandom (KERN_ARND sysctl). The old version went
through arc4random(9) and was a bit weird.
- Adjust arc4random stirring a bit - the existing code looks a little
suspect.
- Fix the nasty pre- and post-read overloading by providing explictit
functions to do these tasks.
- Redo read_random(9) so as to duplicate random(4)'s read internals.
This makes it a first-class citizen rather than a hack.
- Move stuff out of locked regions when it does not need to be
there.
- Trim RANDOM_DEBUG printfs. Some are excess to requirement, some
behind boot verbose.
- Use SYSINIT to sequence the startup.
- Fix init/deinit sysctl stuff.
- Make relevant sysctls also tunables.
- Add different harvesting "styles" to allow for different requirements
(direct, queue, fast).
- Add harvesting of FFS atime events. This needs to be checked for
weighing down the FS code.
- Add harvesting of slab allocator events. This needs to be checked for
weighing down the allocator code.
- Fix the random(9) manpage.
- Loadable modules are not present for now. These will be re-engineered
when the dust settles.
- Use macros for locks.
- Fix comments.
* src/share/man/...
- Update the man pages.
* src/etc/...
- The startup/shutdown work is done in D2924.
* src/UPDATING
- Add UPDATING announcement.
* src/sys/dev/random/build.sh
- Add copyright.
- Add libz for unit tests.
* src/sys/dev/random/dummy.c
- Remove; no longer needed. Functionality incorporated into randomdev.*.
* live_entropy_sources.c live_entropy_sources.h
- Remove; content moved.
- move content to randomdev.[ch] and optimise.
* src/sys/dev/random/random_adaptors.c src/sys/dev/random/random_adaptors.h
- Remove; plugability is no longer used. Compile-time algorithm
selection is the way to go.
* src/sys/dev/random/random_harvestq.c src/sys/dev/random/random_harvestq.h
- Add early (re)boot-time randomness caching.
* src/sys/dev/random/randomdev_soft.c src/sys/dev/random/randomdev_soft.h
- Remove; no longer needed.
* src/sys/dev/random/uint128.h
- Provide a fake uint128_t; if a real one ever arrived, we can use
that instead. All that is needed here is N=0, N++, N==0, and some
localised trickery is used to manufacture a 128-bit 0ULLL.
* src/sys/dev/random/unit_test.c src/sys/dev/random/unit_test.h
- Improve unit tests; previously the testing human needed clairvoyance;
now the test will do a basic check of compressibility. Clairvoyant
talent is still a good idea.
- This is still a long way off a proper unit test.
* src/sys/dev/random/fortuna.c src/sys/dev/random/fortuna.h
- Improve messy union to just uint128_t.
- Remove unneeded 'static struct fortuna_start_cache'.
- Tighten up up arithmetic.
- Provide a method to allow eternal junk to be introduced; harden
it against blatant by compress/hashing.
- Assert that locks are held correctly.
- Fix the nasty pre- and post-read overloading by providing explictit
functions to do these tasks.
- Turn into self-sufficient module (no longer requires randomdev_soft.[ch])
* src/sys/dev/random/yarrow.c src/sys/dev/random/yarrow.h
- Improve messy union to just uint128_t.
- Remove unneeded 'staic struct start_cache'.
- Tighten up up arithmetic.
- Provide a method to allow eternal junk to be introduced; harden
it against blatant by compress/hashing.
- Assert that locks are held correctly.
- Fix the nasty pre- and post-read overloading by providing explictit
functions to do these tasks.
- Turn into self-sufficient module (no longer requires randomdev_soft.[ch])
- Fix some magic numbers elsewhere used as FAST and SLOW.
Differential Revision: https://reviews.freebsd.org/D2025
Reviewed by: vsevolod,delphij,rwatson,trasz,jmg
Approved by: so (delphij)
This makes the TP-Link WDR3600 routers more useful
Differential Revision: https://reviews.freebsd.org/D2780
Approved by: adrian
Sponsored by: ScaleEngine Inc.
Native ABI do not need signal conversion, only emulators may want this. Usually
emulators implements its own sv_sendsig method. For now only ibcs2 emulator does
not have own sv_sendsig implementation and depends on native sendsig() method.
So, remove any extra attempts to convert signal numbers from native sendsig()
methods except from i386 where ibsc2 is living.
when allocation fails, it suffices to perform VM_WAIT. The direct map
covers the entirely of physical memory, so unlike 32-bit mips any
physical page can be used as a page table page.
years for head. However, it is continuously misused as the mpsafe argument
for callout_init(9). Deprecate the flag and clean up callout_init() calls
to make them more consistent.
Differential Revision: https://reviews.freebsd.org/D2613
Reviewed by: jhb
MFC after: 2 weeks
The replacement started at r283088 was necessarily incomplete without
replacing boolean_t with bool. This also involved cleaning some type
mismatches and ansifying old C function declarations.
Pointed out by: bde
Discussed with: bde, ian, jhb
* Change mips24k -> mips74k for hwpmc, but leave it disabled for now.
* don't build pci by default.
* build pci and qca955x_pci for AP135, as theres a PCIe NIC.
* don't build a hwpmc module, it doesn't really work out well
for the mips boards at the moment.
* add ipfw and DEFAULT_TO_ACCEPT.
The QCA955x looks a lot like the AR724x PCIe controller, except it
supports two root complexes. Unfortunately I only have one, so
although this code has started down the path of supporting more than
one, it's definitely not yet ready.
Tested:
* AP135 board (QCA9558 SoC), with the 11ac NIC swapped for an AR9380
PCIe NIC.
Notes:
* Yes, this driver isn't very pretty. I decided to commit what I have
versus holding onto something that isn't yet finished. It is enough
to bring up the above NIC and interrupt routing works, so it's a good
start.
* However, yes, the DDR flush routine hooks need to be fixed up.
I don't think I'm firing the right one at the moment.
