Since the 20.08 release deprecated rte_cio_*mb APIs because these APIs
provide the same functionality as rte_io_*mb APIs on all platforms, so
remove them and use rte_io_*mb instead.
Signed-off-by: Phil Yang <phil.yang@arm.com>
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: David Marchand <david.marchand@redhat.com>
A decision was made [1] to no longer support Make in DPDK, this patch
removes all Makefiles that do not make use of pkg-config, along with
the mk directory previously used by make.
[1] https://mails.dpdk.org/archives/dev/2020-April/162839.html
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Start a new release cycle with empty release notes.
The ABI version becomes 21.0.
The ABI major is back to normal, having only one number (21 vs 20.0).
The map files are updated to the new ABI major number (21).
The ABI exceptions are dropped.
Travis ABI check is disabled because compatibility is not preserved.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
DPAA2 eventdev device is capable of all type queue feature.
Fix the capability flag to reflect the same.
Fixes: 8f4a294c23 ("event/dpaa2: apply new capability flags")
Cc: stable@dpdk.org
Signed-off-by: Apeksha Gupta <apeksha.gupta@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
Minimize the number of different thread variables
Add all the thread specific variables in dpaa_portal
structure to optimize TLS Usage.
Signed-off-by: Rohit Raj <rohit.raj@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
When event device is transmitting packet on OCTEONTX2 it needs to access
the destined ethernet device TXq data.
Currently, we get the TXq data through rte_eth_devices global array.
Instead save the TXq address inside event port memory.
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
In OCTEONTX2 event device we use sub_event_type to store the ethernet
port identifier when we receive work from OCTEONTX2 ethernet device.
This violates the event device spec as sub_event_type should be 0 in
the initial receive stage.
Set sub_event_type to 0 after copying the port id.
Fixes: 0fe4accd8e ("event/octeontx2: add Rx adapter fastpath ops")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
When event device is re-configured maintain the event queue to event port
links and event port status instead of resetting them.
Fixes: cd24e70258 ("event/octeontx2: add device configure function")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Since PMD enqueues a single event at a time, fixing the issue by
passing 1 rather than nb_events to avoid any out of bound access as
reported by coverity.
Coverity issue: 358447
Fixes: 56a96aa424 ("event/octeontx: add framework for Rx/Tx offloads")
Cc: stable@dpdk.org
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Introduce the RTE_LOG_REGISTER macro to avoid the code duplication
in the logtype registration process.
It is a wrapper macro for declaring the logtype, registering it and
setting its level in the constructor context.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add device arguments to lock NPA aura and pool contexts in NDC cache.
The device args take hexadecimal bitmask where each bit represent the
corresponding aura/pool id.
Example:
-w 0002:02:00.0,npa_lock_mask=0xf // Lock first 4 aura/pool ctx
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Currently rte_mcp_ptr_list is being shared as a variable
across libs. This is only used in control path.
This patch change it to a exported function based access.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
This is to reduce the number of variables getting exposed
from the dpaa bus. They are not required to be in bus.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The returned number from rte_event_enqueue_*()
wouldn't include events marked with RTE_EVENT_OP_RELEASE.
Fixes: 1c8e3caa3 ("event/dsw: add event scheduling and device start/stop")
Cc: stable@dpdk.org
Signed-off-by: Yuri Chipchev <yuric@marvell.com>
Reviewed-by: Liron Himi <lironh@marvell.com>
Acked-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Update the portal allocation failure log to print the thread id
as well.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Can be reproduced with "make EXTRA_CFLAGS='-O1'" command using
gcc 7.3.0
Build error
In file included from .../drivers/event/octeontx2/ot
x2_evdev.c:15:0:
.../drivers/event/octeontx2/otx2_evdev_stats.h:
In function ‘otx2_sso_xstats_get’:
.../drivers/event/octeontx2/otx2_evdev_stats.h:124:9:
error: ‘xstats’ may be used uninitialized in this function
[-Werror=maybe-uninitialized]
xstat = &xstats[ids[i] - start_offset];
~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This is false positive, 'xstats_mode_count' should be preventing taking
the loop and accessing 'xstats'.
Returning in that case to silence the compiler warning.
Reported-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Avoid reusing recorded events when performing a migration, since this
may make the migration selection logic pick an already-moved flow.
Fixes: f6257b22e7 ("event/dsw: add load balancing")
Cc: stable@dpdk.org
Reported-by: Venky Venkatesh <vvenkatesh@paloaltonetworks.com>
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Adding support for rx checksum offload. In case of wrong
checksum received (inner/outer l3/l4) it reports the
corresponding layer which has bad checksum. It also adds
rx burst function pointer hook for rx checksum offload to
event PMD.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Adding macro based framework to hook dequeue/enqueue function
pointers to the appropriate function based on rx/tx offloads.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
When eth port queue is removed from Rx adapter using
rte_event_eth_rx_adapter_queue_del() it incorrectly
initializes CQ context instead of modifying it. This
might lead to a crash when CQ context is modified
as a part of rte_eth_dev_stop() sequence as CQ will
hold invalid entries. This is responsibility of an
application to call rte_event_eth_rx_adapter_queue_del()
to remove eth port queue from Rx adapter in tear down
sequence.
Fixes: 37720fc1fb ("event/octeontx2: add Rx adapter")
Cc: stable@dpdk.org
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Adding macro based framework to hook rx/tx burst function
pointers to the appropriate function based on rx/tx offloads.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Adding multi segment support to the octeontx PMD. Also
adding the logic to share rx/tx ofloads with the eventdev
code.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Add libatomic as a global dependency when compiling for 32-bit using
clang. As we need libatomic for 64-bit atomic ops.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Add redundant stack variable initialization to work around
false-positive warnings in older versions of GCC.
Fixes: 1f2b99e8d9 ("event/dsw: improve migration mechanism")
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Use c11 atomics with RELAXED ordering instead of rte_atomic ops which
enforce unnessary barriers on arm64.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
DSW keeps an internal port load estimate, used by the load balancing
mechanism. As a side effect, it keeps track of the total number of
busy cycles since startup. This metric is indirectly exposed in the
form of DSW xstats' "port_<n>_event_proc_latency", which is the total
number of busy cycles divided by the total number of events processed
on a particular port.
An external application can take (event_latency * dequeued) to go back
to busy_cycles. One reason for doing this is to measure the port's
load during a longer time period, without resorting to sampling
"port_<n>_load". However, as the number dequeued events grows, a
rounding error in event_latency renders the application-calculated
busy_cycles inaccurate.
Thus, it makes sense to directly expose the number of busy cycles as a
DSW xstats, even though it might seem redundant.
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
On dequeue, polling the control ring once is enough.
Fixes: f6257b22e7 ("event/dsw: add load balancing")
Cc: stable@dpdk.org
Suggested-by: Ola Liljedahl <ola.liljedahl@arm.com>
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
DSW limits the rate of migrations on a per-port basis. Hence, as the
number of cores grows, so does the total migration capacity.
In high core-count systems, this allows for a situation where flows
are migrated to a lightly loaded port which recently already received
a number of new flows (from other ports). The processing load
generated by these new flows may not yet be reflected in the lightly
loaded port's load estimate. The result is that the previously lightly
loaded port is now overloaded.
This patch adds a rough estimate of the size of the inbound migrations
to a particular port, which can be factored into the migration logic,
avoiding the above problem.
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Allowing moving multiple flows in one migration transaction, to
rebalance load more quickly.
Introduce a threshold to avoid migrating flows between ports with very
similar load.
Simplify logic for selecting which flow to migrate. The aim is now to
move flows in such a way that the receiving port is as lightly-loaded
as possible (after receiving the flow), while still migrating enough
flows from the source port to reduce its load. This is essentially how
legacy strategy work as well, but the code is more readable.
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
To allow visualization of migrations, track the number flow
immigrations in "port_<N>_immigrations". The "port_<N>_migrations"
retains legacy semantics, but is renamed "port_<N>_emigrations".
Expose the number of events currently undergoing processing
(i.e. pending releases) at a particular port.
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Reduce the maximum number of DSW flows from 32k to 8k, to be able
rebalance load faster.
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
In DSW, in case a port can't produce any events for the application to
consume, the port is considered idle.
To slightly reduce wall-time latency, flush the port's output buffer
in case of such an empty dequeue.
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Each workslot is always bound to a specific lcore there is no multi-core
contention to cause cache trashing as a result it is safe to remove the
WFE. Also, in dual workslot dequeue work will mostlikely be available on
the pair workslot making WFE impractical.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Remove setting ALLOW_EXPERIMENTAL_API individually for each Makefile and
meson.build. Instead, enable ALLOW_EXPERIMENTAL_API flag across app, lib
and drivers.
This changes reduces the clutter across the project while still
maintaining the functionality of ALLOW_EXPERIMENTAL_API i.e. warning
external applications about experimental API usage.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
The EAL API (with doxygen documentation) is moved from
common/include/ to include/, which makes more clear that
it is the global API for all environments and architectures.
Note that the arch-specific and OS-specific include files are not
in this global include directory, but include/generic/ should
cover the doxygen documentation for them.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
This patch sets the number of atomic ordered sequences
supported by the driver.
Fixes: dbf63bd43a ("event/dpaa2: support ordered queue")
Cc: stable@dpdk.org
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Three warnings are commonly disabled in DPDK with make and meson:
* address-of-packed-member
always disabled
* missing-field-initializers
disabled with meson
disabled with make + clang or make + gcc < 4.7
disabled with make + gcc <= 5 for test files and event drivers
* packed-not-aligned
disabled with meson
This change is removing exceptions for missing-field-initializers.
As it is always disabled, some redundant configs are cleaned up.
Now the situation is:
* address-of-packed-member
always disabled
* missing-field-initializers
always disabled
* packed-not-aligned
disabled with meson
It could alternatively be decided to disable missing-field-initializers
only for old gcc (< 6).
The warning packed-not-aligned is not modified in this change.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Added new flag for SECURITY in compiler optimized Tx fastpath
framework. With this, compiler autogenerates functions which
have security enabled.
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Replace DSW's use of regular DPDK rings (and code for
packing/unpacking control messages into void pointers) with custom
size rings.
In addition to cleaner code, this change allows DSW to support up to
the eventdev API's maximum of 255 ports by tweaking DSW_MAX_PORTS.
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Use the new API to wait in low power state instead of continuous
polling to save CPU cycles and power.
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Relax memory requirement for event timers when internal mempool used is
octeontx2 mempool.
Add debug log to print the memory used.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
If an application issues rte_event_enqueue_new_burst() or
rte_event_enqueue_forward_burst() call with a burst of events longer
than the configured max enqueue burst size, DSW allocates credits not
only for events actually enqueued, but for the complete burst. If this
process is repeated, enough credits will have leaked to cause the
event device to backpressure (i.e. disallow) any new enqueue
operations.
In addition, the port-level enqueue xstats will log the wrong number
of events enqueued for oversized enqueues.
This patch makes DSW gracefully handle oversized enqueue bursts.
Fixes: 1c8e3caa3b ("event/dsw: add event scheduling and device start/stop")
Cc: stable@dpdk.org
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Fix DSW's rte_event_enqueue_burst(), so that a call with a zero-sized
event array immediately flushes the port's output buffers. Prior to
this patch, the flush operation would be deferred to the next enqueue
or dequeue call, which is inconsistent with DSW documentation.
Fixes: 1c8e3caa3b ("event/dsw: add event scheduling and device start/stop")
Cc: stable@dpdk.org
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
When net/octeontx is connected to event/octeontx as an event Rx adapter,
PKI aka 'net/octeontx' can forward packets directly to SSO aka
'event/octeontx'.
When pumping traffic to PKI if flow control is disabled internal FIFOs
might be overrun causing partial l2 packets to be enqueued.
SSO receives <31:0> TAG tag calculated by PKI, in normal cases <31:28>
is always 0 which signifies RTE_EVENT_TYPE_ETHDEV. But in case of
partial received packets PKI sets the <31:0> TAG as 0xFFFFFFFF which
is an invalid event type.
Add a check to see if TAG is 0xFFFFFFFF and free the partial receive
packet.
Fixes: d0d6549860 ("net/octeontx: support event Rx adapter")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Since TIM buckets are always aligned to 32B and our cache line size being
128B, we will always have a cache miss when reading current_chunk pointer.
Avoid the cache miss by storing the current_chunk pointer in the bucket
opposite to the current bucket.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Fix HW race condition observed when timeout resolution is low (<5us).
When HW traverses a given TIM bucket it will clear chunk_remainder,
but since SW always decreases the chunk_remainder at the start of the
arm routine it might cause a race where SW updates chunk_remainder
after HW has cleared it that lead to nasty side effects.
Fixes: 95e4e4ec74 ("event/octeontx2: add timer arm timeout burst")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Sync mail box data structures to version 1.1.3.
Add mail box version verification and defer initializing octeontx
devices if mail box version mismatches.
Update OCTEON TX limitaion with max mempool size used.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Merge all versions in linker version script files to DPDK_20.0.
This commit was generated by running the following command:
:~/DPDK$ buildtools/update-abi.sh 20.0
Signed-off-by: Pawel Modrak <pawelx.modrak@intel.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Since the library versioning for both stable and experimental ABI's is
now managed globally, the LIBABIVER and version variables no longer
serve any useful purpose, and can be removed.
The replacement in Makefiles was done using the following regex:
^(#.*\n)?LIBABIVER\s*:=\s*\d+\n(\s*\n)?
(LIBABIVER := numbers, optionally preceded by a comment and optionally
succeeded by an empty line)
The replacement for meson files was done using the following regex:
^(#.*\n)?version\s*=\s*\d+\n(\s*\n)?
(version = numbers, optionally preceded by a comment and optionally
succeeded by an empty line)
[David]: those variables are manually removed for the files:
- drivers/common/qat/Makefile
- lib/librte_eal/meson.build
[David]: the LIBABIVER is restored for the external ethtool example
library.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Some variables are commented out. Remove them.
Fixes: d548ef513c ("event/opdl: add unit tests")
Cc: stable@dpdk.org
Signed-off-by: Kevin Traynor <ktraynor@redhat.com>
Acked-by: Liang Ma <liang.j.ma@intel.com>
During LTO build compiler reports some 'false positive' warnings about
variables being possibly used uninitialized. This patch silences these
warnings.
Exemplary compiler warning to suppress (with LTO enabled):
error: ‘chunk’ may be used uninitialized in this function
[-Werror=maybe-uninitialized]
bkt->current_chunk = (uintptr_t)chunk;
Signed-off-by: Andrzej Ostruszka <aostruszka@marvell.com>
Use WFE to save power while waiting for tag to become head.
SSO signals EVENTI to allow cores to exit from wfe when they
are waiting for specific operations in which one of them is
setting HEAD bit in GWS_TAG.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
This code is being shared by more than 1 type of driver.
Common is most appropriate place for it.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
While meson always adds -Wall flag to C compiles, the make build adds extra
warning flags that are not present in the meson build. This addresses that
shortcoming by adding additional warning flags to our builds. The one
omission is the -Wcast-align flag, which though present in make gcc builds,
gives a lot of warnings/errors when used with clang.
The removed warning "-Wunused-parameter" is covered by the "-Wextra"
parameter so is unnecessary.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
This patch adds the support of Tx adapter for DPAA2 platform
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch sets the priority of the dpcon dev, such that it is
within the supported range of dpcon
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch adds the support of Tx adapter for DPAA1 platform
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The number of atomic flows supported was not returned correctly for
DPAA driver. This patch fixes the same.
Fixes: b08dc6430a ("event/dpaa: add queue config get/set")
Cc: stable@dpdk.org
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch introduces a `flag` in the Eth TX adapter enqueue API.
Some drivers may support burst functionality only with the packets
having same destination device and queue.
The flag `RTE_EVENT_ETH_TX_ADAPTER_ENQUEUE_SAME_DEST` can be used
to indicate this so the underlying driver, for drivers to utilize
burst functionality appropriately.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch add support for testing dpaa2 eventdev self test
for basic sanity for parallel and atomic queues.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The patch adds the break in the TX function, if it is failing
to send the packets out. Previously the system was trying
infinitely to send packet out.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
This patch removes the conditional compilation for
cryptodev event support from RTE_LIBRTE_SECURITY flag.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Test vector expect only one type of scheduling as default.
The old code is provide support scheduling types instead of default.
Fixes: 13370a3877 ("eventdev: fix inconsistency in queue config")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Octeontx2 SSO co-processor allows multiple ethernet device Rx queues
connected to a single Event device queue.
Fix the Rx adapter capabilities to allow application to configure
Rx queueus in n:1 ratio to event queues by adding
`RTE_EVENT_ETH_RX_ADAPTER_CAP_MULTI_EVENTQ` as a capability.
Fixes: 37720fc1fb ("event/octeontx2: add Rx adapter")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
The sw PMD implements xstats reset by having the xstat get operations
return a value to the statistic's value at the last reset. The value at the
last reset is maintained in the per-xstat reset_value field, but the PMD
was setting reset_value = current - reset_value instead of reset_value =
current.
Fixes: c1ad03df7a ("event/sw: support xstats")
Cc: stable@dpdk.org
Signed-off-by: Gage Eads <gage.eads@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Add support to below TCP segmentation offloads for
96XX A1 onwards and 95xx B0 onwards.
- TCPv4, TCPv6
- VXLAN[v4 | v6][v4 | v6]
- GENEVE[v4 | v6][v4 | v6]
This patch also modifies a fastpath function to be forced
inline due to performance reasons for multi-seg mode.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
event dpaa device support both ethernet as well as
crypto queues to be attached to it. eth_rx_adapter
provide infrastructure to attach ethernet queues and
crypto_adapter provide support for crypto queues.
This patch add support for dpaa_eventdev to attach
dpaa_sec queues.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Restrict this header inclusion to its real users.
Fixes: 028669bc9f ("eal: hide shared memory config")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
A huge drop in per core MPPS value was observed when PTP stack is
enabled. The reason behind the bottleneck is HW serialises the
transfer of all SQEs, which seeks timestamp capture, on the same
send DMA path. Hence only those packets which requires timestamp
capture should set SETTSTAMP in send mem alg.
With this patch timestamping would be done only for those packets
with PKT_TX_IEEE1588_TMST set.
Fixes: fb3ae0951a ("net/octeontx2: support Tx")
Fixes: 8980a15300 ("event/octeontx2: support PTP for SSO")
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
In order to align name with other PCI driver flag such as
RTE_PCI_DRV_NEED_MAPPING and to reflect its purpose, change
RTE_PCI_DRV_IOVA_AS_VA flag name as RTE_PCI_DRV_NEED_IOVA_AS_VA.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Add PTP support for SSO based on rx_offloads of the queue connected to
it.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Fixes: 371a688fc1 ("event/sw: support linking queues to ports")
Cc: stable@dpdk.org
Signed-off-by: Dilshod Urazov <dilshod.urazov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
The functions rte_service_may_be_active(), rte_service_lcore_attr_get(),
and rte_service_attr_reset_all() were introduced nearly a year ago in DPDK
18.08. They can be considered non-experimental for the 19.08 release.
rte_service_may_be_active() is used by the sw PMD, and this commit allows
it to not need any experimental API.
Signed-off-by: Gage Eads <gage.eads@intel.com>
When compiling with clang on 32-bit platforms, we are missing
copies of 64-bit atomic functions. We can solve this by linking
against libatomic for the drivers and libs which need those
atomic ops.
Fixes: f0b9982cb3 ("event/octeontx2: add TIM bucket operations")
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Add devargs to control each event timer adapter i.e. TIM rings internal
parameters uniquely. The following dict format is expected
[ring-chnk_slots-disable_npa-stats_ena]. 0 represents default values.
Example:
--dev "0002:0e:00.0,tim_ring_ctl=[2-1023-1-0]"
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Add devargs to limit the max number of TIM rings reserved on probe.
Since, TIM rings are HW resources we can avoid starving other
applications by not grabbing all the rings.
Example:
--dev "0002:0e:00.0,tim_rings_lmt=2"
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Add event timer adapter statistics get and reset functions.
Stats are disabled by default and can be enabled through devargs.
Example:
--dev "0002:0e:00.0,tim_stats_ena=1"
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Add event timer arm timeout burst function.
All the timers requested to be armed have the same timeout.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Add internal SSO functions to allow event adapters to resize SSO buffers
that are used to hold in-flight events in DRAM.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Add devargs support to modify number of chunk slots. Chunks are used to
store event timers, a chunk can be visualised as an array where the last
element points to the next chunk and rest of them are used to store
events. TIM traverses the list of chunks and enqueues the event timers
to SSO.
If no argument is passed then a default value of 255 is taken.
Example:
--dev "0002:0e:00.0,tim_chnk_slots=511"
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
If the chunks are allocated from NPA then TIM can automatically free
them when traversing the list of chunks.
Add devargs to disable NPA and use software mempool to manage chunks.
Example:
--dev "0002:0e:00.0,tim_disable_npa=1"
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Allow TIM to optimize user supplied configuration based on
RTE_EVENT_TIMER_ADAPTER_F_ADJUST_RES flag.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
When the application calls timer adapter create the following is used:
- Allocate a TIM lf based on number of lf's provisioned.
- Verify the config parameters supplied.
- Allocate memory required for
* Buckets based on min and max timeout supplied.
* Allocate the chunk pool based on the number of timers.
On Free:
- Free the allocated bucket and chunk memory.
- Free the TIM lf allocated.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Add selftest to verify sanity of SSO.
Can be run by passing devargs to SSO PF as follows:
Example:
--dev "0002:0e:00.0,selftest=1"
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
SSO GGRPs i.e. queue uses DRAM & SRAM buffers to hold in-flight
events. By default the buffers are assigned to the SSO GGRPs to
satisfy minimum HW requirements. SSO is free to assign the remaining
buffers to GGRPs based on a preconfigured threshold.
We can control the QoS of SSO GGRP by modifying the above mentioned
thresholds. GGRPs that have higher importance can be assigned higher
thresholds than the rest.
Example:
--dev "0002:0e:00.0,qos=[1-50-50-50]" // [Qx-XAQ-TAQ-IAQ]
Qx -> Event queue Aka SSO GGRP.
XAQ -> DRAM In-flights.
TAQ & IAQ -> SRAM In-flights.
The values need to be expressed in terms of percentages, 0 represents
default.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Octeontx2 SSO by default is set to use dual workslot mode.
Add devargs option to force legacy mode i.e. single workslot mode.
Example:
--dev "0002:0e:00.0,single_ws=1"
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
OcteonTx2 AP core SSO cache contains two entries each entry caches
state of an single GWS aka event port.
AP core requests events from SSO by using following sequence :
1. Write to SSOW_LF_GWS_OP_GET_WORK
2. Wait for SSO to complete scheduling by polling on SSOW_LF_GWS_TAG[63]
3. SSO notifies core by clearing SSOW_LF_GWS_TAG[63] and if work is
valid SSOW_LF_GWS_WQP is non-zero.
The above sequence uses only one in-core cache entry.
In dual workslot mode we try to use both the in-core cache entries by
triggering GET_WORK on a second workslot as soon as the above sequence
completes. This effectively hides the schedule latency of SSO if there
are enough events with unique flow_tags in-flight.
This mode reserves two SSO GWS lf's for each event port effectively
doubling single core performance.
Dual workslot mode is the default mode of operation in octeontx2.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Add support for retrieving statistics from SSO GWS and GGRP.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Register and implement SSO GWS and GGRP IRQ handlers for error
interrupts.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Links between queues and ports are controlled by setting/clearing GGRP
membership in SSOW_LF_GWS_GRPMSK_CHG.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
The number of events for a *open system* event device is specified
as -1 as per the eventdev specification.
Since, Octeontx2 SSO inflight events are only limited by DRAM size, the
xae_cnt devargs parameter is introduced to provide upper limit for
in-flight events.
Example:
--dev "0002:0e:00.0,xae_cnt=8192"
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add the device configure function that attaches the requested number of
SSO GWS(event ports) and GGRP(event queues) LF's to the PF.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Add the info_get function to return details on the queues, flow,
prioritization capabilities, etc. which this device has.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
SSO object needs to be initialized to communicate with the kernel AF
driver through mbox using the common API's.
Also, initialize the internal eventdev structure to defaults.
Attach NPA lf to the PF if needed.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add the make and meson based build infrastructure along with the
eventdev(SSO) device probe.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
For each driver where we optionally disable it, add in the reason why it's
being disabled, so the user knows how to fix it.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
When compiling with clang on 32-bit platforms, we are missing copies
of 64-bit atomic functions. We can solve this by linking against
libatomic for the drivers and libs which need those atomic ops.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
The scheduling type parameter is not applicable for single link
queues. DSW would, at the time of rte_event_queue_setup(), erroneously
verify that scheduling type was one of the supported types, and
returned -ENOTSUP in case of RTE_SCHED_TYPE_ORDERED.
Fixes: 4540ee9c68 ("event/dsw: add device and queue configuration")
Cc: stable@dpdk.org
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Acked-by: Gage Eads <gage.eads@intel.com>
The DSW event device didn't set RTE_EVENT_DEV_CAP_MULTIPLE_QUEUE_PORT
and RTE_EVENT_DEV_CAP_NONSEQ_MODE, even though it has both these
capabilities.
Fixes: 4540ee9c68 ("event/dsw: add device and queue configuration")
Cc: stable@dpdk.org
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Promote the adapter functions and rte_event_port_unlinks_in_progress()
as stable as it's been added for a while now and multiple drivers and
test application like test-eventdev has been tested using the adapter APIs.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Disable octeontx for gcc 4.8.5 as compiler is emitting "internal compiler
error" for aarch64
Fixes: bd77f2d64c ("event/octeontx: build with meson")
Fixes: 4f760550a0 ("mk: disable OcteonTx for buggy compilers")
Fixes: f3af3e44a4 ("mk: disable OcteonTx for buggy compilers only on arm64")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Define variables for "is_linux", "is_freebsd" and "is_windows"
to make the code shorter for comparisons and more readable.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Do a global replace of snprintf(..."%s",...) with strlcpy, adding in the
rte_string_fns.h header if needed. The function changes in this patch were
auto-generated via command:
spatch --sp-file devtools/cocci/strlcpy.cocci --dir . --in-place
and then the files edited using awk to add in the missing header:
gawk -i inplace '/include <rte_/ && ! seen { \
print "#include <rte_string_fns.h>"; seen=1} {print}'
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This patch fixes a number of instances of the same return
value mis-check, where previously we checked for a negative
return value as error, however the API returns an unsigned
integer, so these return value checks are invalid.
The rte_event_enqueue_burst() API returns the number of
events enqueued, so in order to identify the error case,
we must check for != the number of intended enqueues.
Fixes: cd1a9e3eab ("test/eventdev: add SW tests for load balancing")
Cc: stable@dpdk.org
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
All drivers should have SPDX on the first line of the source
files in the format
/* SPDX-License-Identifier: ...
Several files used minor modifications which were inconsistent
with the pattern. Fix it to make scanning tools easier.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
sprintf function is not secure as it doesn't check the length of string.
More secure function snprintf is used.
Fixes: 3c7f3dcfb0 ("event/opdl: add PMD main body and helper function")
Cc: stable@dpdk.org
Signed-off-by: Pallantla Poornima <pallantlax.poornima@intel.com>
The term "linuxapp" is a legacy one, but just calling the subdirectory
"linux" is just clearer for all concerned.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
'OCTEON TX' is the registered name. All other usages need to be fixed.
Signed-off-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
RTE_SECURITY is enabled by default. If it is disabled, dpaa2_sec,
dpaa_sec and caam_jr compilation fails.
This patch fixes compilation by disabling these drivers
when rte_security is not available.
Fixes: 1ee9569576 ("config: enable dpaaX drivers for generic ARMv8")
Fixes: 09e1e8d256 ("mk: fix dependencies of dpaaX drivers")
Fixes: af7c9b5e9c ("crypto/caam_jr: introduce basic driver")
Cc: stable@dpdk.org
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
event dpaa2 device support both ethernet as well as
crypto queues to be attached to it. eth_rx_adapter
provide infrastructure to attach ethernet queues and
crypto_adapter provide support for crypto queues.
This patch add support for dpaa2_eventdev to attach
dpaa2_sec queues.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Signed-off-by: Ashish Jain <ashish.jain@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
This patch add the support for new Management Complex
Firmware version to 10.1x.x. One of the main changes in
the APIs ordered queue.
The fslmc bus lib ABI will need to be bumped to reflect
the MC FW API and structure changes.
This will also result in bumping of ABI verion of all dependent
libs as they internally use the MC FW APIs and structures.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
With this patch, fslmc bus and ethernet devices on this bus
would start using the physical-virtual library interfaces.
This patch impacts mempool/dpaa2, event/dpaa2, net/dpaa2,
raw/dpaa2_cmdif and raw/dpaa2_qdma as they are dependent
on the bus/fslmc and thus impact linkage of libraries.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
With this patch, dpaa bus and ethernet devices on this bus
would start using the physical-virtual library interfaces.
This patch impacts mempool/dpaa, event/dpaa and net/dpaa as
they are dependent on the bus/dpaa and thus impact linkage of
libraries.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
This patch add support to use select call with qman portal fd
for timeout based dequeue request for eventdev.
If there is a event available qman portal fd will be set
and the function will be awakened. If no event is available,
it will only wait till the given timeout value.
In case of interrupt the timeout ticks are used as usecs.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Make the -Wno-format-nonliteral flag conditional, and only set in
clang and gcc builds, since this flag is not supported (nor needed)
when building dsw with icc.
Fixes: 46a186b1f0 ("event/dsw: add device registration and build system")
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add Tx adapter support and move few routines around to avoid code
duplication.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This commit adds a unit test that checks the behaviour
of the unlinks_in_progress() function, ensuring that the
returned values are the number of unlinks requested,
until the scheduler runs and "acks" the requests, after
which the count should be zero again.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
This commit adds a counter to each port, which counts the
number of unlinks that have been performed. When the scheduler
thread starts its scheduling routine, it "acks" all unlinks that
have been requested, and the application is gauranteed that no
more events will be scheduled to the port from the unlinked queue.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
This commit fixes the cq index checks when unlinking
ports/queues while the scheduler core is running.
Previously, the == comparison could be "skipped" if
in particular corner cases. With the check being changed
to >= this is resolved as the cq idx gets reset to zero.
Bugzilla ID: 60
Fixes: 617995dfc5 ("event/sw: add scheduling logic")
Cc: stable@dpdk.org
Suggested-by: Matias Elo <matias.elo@nokia.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
This patch restructure the code to have the QBMAN portal
affliated at run time for per lcore basis.
The device cleanup is also improved.
Signed-off-by: Sunil Kumar Kori <sunil.kori@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch enhances:
1. Configure the dequeue time out value as per the given
method or per dequeue, global or default.
2. The timeout values were being mixed as ns or ms timeouts,
Now the values are stored as ns and scale is in ms.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Fixes: 7b6edb640b ("event/dpaa2: have separate structure to hold dqrr entries")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The DSW event device now implements the 'xstats' interface and a
number of port- and device-level counters.
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
With this patch, the DSW event device will (optionally) sort the event
burst before giving it to the application. The sorting will primarily
be on queue id, and secondary on flow id.
The sorting is an attempt to optimize data and instruction cache usage
for the application, at the cost of additional event device overhead.
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
The DSW event device will now attempt to migrate (move) flows between
ports in order to balance the load.
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
The DSW event device port now attempts to estimate its load (i.e. how
busy it is). This is required for load balancing to work (although
load balancing is not included in this patch), and may also be useful
for debugging purposes.
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
With this patch, the DSW event device can be started and stopped,
and also supports scheduling events between ports.
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Added support for linking and unlinking ports to queues in a DSW event
device.
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Allow port setup and release in the DSW event device.
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Allow queue- and device-level configuration for and retrieval of
contextual information from a DSW event device.
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This patch contains the Meson and GNU Make build system extensions
required for the Distributed Event Device, and also the initialization
code for the driver itself.
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Modifying port state is not necessary when starting/stopping Rx adapter
as it is same as starting/stopping ethdev.
Fixes: 45a914c5bd ("event/octeontx: support event Rx adapter")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
HW needs each pool to be mapped to an aura set of 16 auras.
Previously, pool to aura mapping was considered to be 1:1.
Fixes: 02fd6c7443 ("mempool/octeontx: support allocation")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This commit also adds a flush callback test to the sw eventdev's selftest
suite.
Signed-off-by: Gage Eads <gage.eads@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
When event queues are being flushed the getwork operation used to extract
events should be a grouped getwork operation to the specific event queue.
Fixes: 8384f0e039 ("event/octeontx: support device stop flush callback")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
A constructor is usually declared with RTE_INIT* macros.
As it is a static function, no need to declare before its definition.
The macro is used directly in the function definition.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
This patch defines capabilities & functions to be called
for eventdev PMDs.
Signed-off-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Removing use of link data under evq_info_t structure which was
used to check whether the the associated evq has been linked
or not. Since, an evq can be linked to multiple event ports,
thus setting the link variable only allowed the first event
port to be associated with the evq. This led to huge performance
drop in case of multiple event ports as I/O only worked on
first event port associated with the evq.
Fixes: 0ce3ce7c27 ("event/dpaa2: add configuration functions")
Cc: stable@dpdk.org
Signed-off-by: Ashish Jain <ashish.jain@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Driver shouldn't take decision on signals received. The return
from epoll was blocking on EINTR which is not the right use-case.
Fixes: 36d87bb922 ("event/dpaa2: handle timeout using interrupts in dequeue")
Cc: stable@dpdk.org
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
