rte_memzone_reserve() will reserve the biggest contiguous memzone
available if received 0 as size param.
Fixes: 9ba7981ec9 ("ena: add communication layer for DPDK")
Cc: stable@dpdk.org
Signed-off-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
Memory allocation region id could possibly be non-unique
due to non-atomic increment, causing allocation failure.
Fixes: 9ba7981ec9 ("ena: add communication layer for DPDK")
Cc: stable@dpdk.org
Signed-off-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
Some of the ENA devices can't handle buffers which are smaller than a
1400B. Because of this limitation, size of the buffer is being checked
and limited during the Rx queue setup.
If it's below the allowed value, PMD won't finish it's configuration
successfully..
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
Update a switch rule' action from "to VSI" to "to VSI List"
should only happen when the same rule has been programmed with
a different fwd destination. This is already handled by below
code block:
m_entry = ice_find_adv_rule_entry(...)
if (m_entry) {
...
ice_adv_add_update_vsi_list(...)
}
The following ice_update_pkt_fwd_rule is unnecessary and should be
removed due to:
1) If a switch rule's action is still to VSI, which means, it is
the first time be issued, we don't need to update it "to VSI
List."
2) Actually the implementation does not match the comment, it still
update the rule with "to VSI" action.
Fixes: fed0c5ca5f ("net/ice/base: support programming a new switch recipe")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
This patch is intended to add iavf_dev_reset ops, enable iavf to support
"port reset all".
Signed-off-by: Lunyuan Cui <lunyuanx.cui@intel.com>
Tested-by: Zhaoyan Chen <zhaoyan.chen@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Enable source MAC address and destination MAC address as FDIR's
input set for ipv4-other, ipv4-udp and ipv4-tcp. When OVS-DPDK is
working as a pure L2 switch, enable MAC address as FDIR input set
with Mark+RSS action would help the performance speed up. And FVL
FDIR supports to change input set with MAC address.
Signed-off-by: Lunyuan Cui <lunyuanx.cui@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This patch moved the RSS initialization from dev start to dev configure
to fix RSS advanced rule invalid issue after running port stop and port
start.
Fixes: 5ad3db8d4b ("net/ice: enable advanced RSS")
Cc: stable@dpdk.org
Signed-off-by: Junyu Jiang <junyux.jiang@intel.com>
Tested-by: Zhiwei He <zhiwei.he@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
When nfp_pf_create_dev() is cleaning up, it does not correctly set
the dev_private variable to NULL, which will lead to a double free.
Fixes: ef28aa96e5 ("net/nfp: support multiprocess")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Heinrich Kuhn <heinrich.kuhn@netronome.com>
Changing format specifier for the 'size_t' as '%z' and for 'off_t' as
'%jd'.
Also this fix enables compiling PMD for 32bit architecture.
Fixes: 29a62d1476 ("net/nfp: add CPP bridge as service")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Heinrich Kuhn <heinrich.kuhn@netronome.com>
Since the ring buffer with host is shared for both transmit
completions and receive packets, it is possible that transmitter
could get starved if receive ring gets full.
Better to process all outstanding events which frees up transmit
buffer slots, even if means dropping some packets.
Fixes: 7e6c824307 ("net/netvsc: avoid over filling Rx descriptor ring")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The transmit need signal function can avoid an unnecessary
dereference by passing the right pointer. This also makes
code better match FreeBSD driver.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
If tx_free_thresh is quite low, it is possible that we need to
cleanup based on burst size.
Fixes: fc30efe3a2 ("net/netvsc: change Rx descriptor setup and sizing")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Remove unlocked check for data in receive ring.
This check is not safe because of missing barriers etc.
Fixes: 4e9c73e96e ("net/netvsc: add Hyper-V network device")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The netvsc PMD was putting the mac address in private data but the
core rte_ethdev doesn't allow that it. It has to be in rte_malloc'd
memory or a message will be printed on shutdown/close.
EAL: Invalid memory
Fixes: f8279f47dd ("net/netvsc: fix crash in secondary process")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The VMBus has reserved transmit area (per device) and transmit
descriptors (per queue). The previous code was always having a 1:1
mapping between send buffers and descriptors.
This can lead to one queue starving another and also buffer bloat.
Change to working more like FreeBSD where there is a pool of transmit
descriptors per queue. If send buffer is not available then no
aggregation happens but the queue can still drain.
Fixes: 4e9c73e96e ("net/netvsc: add Hyper-V network device")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
It is possible for a packet to arrive during the configuration
process when setting up multiple queue mode. This would cause
configure to fail; fix by just ignoring receive packets while
waiting for control commands.
Use the receive ring lock to avoid possible races between
oddly behaved applications doing rx_burst and control operations
concurrently.
Fixes: 4e9c73e96e ("net/netvsc: add Hyper-V network device")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
If application cares about descriptor limits, the netvsc device
values should reflect those of the VF as well.
Fixes: dc7680e859 ("net/netvsc: support integrated VF")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
After VF reset, VF's VSI number may be changed,
the switch rule which forwards packet to the old
VSI number should be redirected to the new VSI
number.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Enable flow redirect on switch, currently only
support VSI redirect.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The input set for inner type of vlan item should
be ICE_INSET_ETHERTYPE, not ICE_INSET_VLAN_OUTER.
This mac vlan filter is also part of DCF switch filter.
Fixes: 47d460d632 ("net/ice: rework switch filter")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch add switch filter permission stage support
for more flow pattern in pf only pipeline mode.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch add switch filter support for IPv6 NAT-T packets,
it enable switch filter to direct IPv6 packets with
NAT-T payload to specific action.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch add switch filter support for PFCP packets,
it enable switch filter to direct IPv4/IPv6 packets with
PFCP session or node payload to specific action.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch add support for ESP/AH/L2TP packets,
it enable switch filter to direct IPv6 packets with
ESP/AH/L2TP payload to specific action.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The action number can only be one for DCF or PF
switch filter, not support multiple actions.
Fixes: 47d460d632 ("net/ice: rework switch filter")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The default tunnel type for switch filter change to new
definition of ICE_SW_TUN_AND_NON_TUN in order that the rule
will be apply to more packet type.
Fixes: 47d460d632 ("net/ice: rework switch filter")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch add support for MAC VLAN rule,
it enable switch filter to direct packet base on
mac address and VLAN id.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
DCF need to make configuration of flexible mask, that is to say
some input set mask may be not 0xFFFF type all one bit. In order
to direct L2/IP multicast packets, the mask for source IP maybe
0xF0000000, this patch enable switch filter parser for it.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch add more support for PPPoE packet,
it enable switch filter to direct PPPoE packet base on
session id and PPP protocol type.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
DCF on CVL is a control plane VF which take the responsibility to
configure all the PF/global resources, this patch add support DCF
on to program forward rule to direct packets to VFs.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch adds SDP packet parsing support with custom L2 header,
adds support to include a field from custom header for flow tag
generation.
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
When an application invokes rte_eth_dev_configure consecutively without
setting up Rx/Tx queues, it will incorrectly return error while trying
to restore Rx/Tx queue configuration.
Fix configuration sequence by checking if any Rx/Tx queues are
previously configured before trying to restore them.
Fixes: 548b5839a3 ("net/octeontx2: add device configure operation")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add Traffic Management capability callbacks to provide
global, level and node capabilities. This patch also
adds documentation on Traffic Management Support.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Krzysztof Kanas <kkanas@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add Tx queue ratelimiting support. This support is mutually
exclusive with TM support i.e when TM is configured, tx queue
ratelimiting config is no more valid.
Signed-off-by: Krzysztof Kanas <kkanas@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add debug support to TM to dump configured topology
and registers. Also enable debug dump when sq flush fails.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Krzysztof Kanas <kkanas@marvell.com>
Add dynamic parent and shaper update callbacks that
can be used to change RR Quantum or PIR/CIR rate dynamically
post hierarchy commit. Dynamic parent update callback only
supports updating RR quantum of a given child with respect to
its parent. There is no support yet to change priority or parent
itself.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Krzysztof Kanas <kkanas@marvell.com>
Add TM support for stats read and private shaper
profile addition or deletion.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Krzysztof Kanas <kkanas@marvell.com>
Add TM hierarchy commit callback to support enabling
newly created topology.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Krzysztof Kanas <kkanas@marvell.com>
Add TM support to suspend and resume nodes post hierarchy
commit.
Signed-off-by: Krzysztof Kanas <kkanas@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Adds support to Traffic Management callbacks "node_add"
and "node_delete". These callbacks doesn't support
dynamic node addition or deletion post hierarchy commit.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Krzysztof Kanas <kkanas@marvell.com>
Modify resource allocation and freeing logic to support
dynamic topology commit while to traffic is flowing.
This patch also modifies SQ flush to timeout based on minimum shaper
rate configured. SQ flush is further split to pre/post
functions to adhere to HW spec of 96XX C0.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Krzysztof Kanas <kkanas@marvell.com>
Restructure traffic manager helper function by splitting to
multiple sets of register configurations like shaping, scheduling
and topology config.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Krzysztof Kanas <kkanas@marvell.com>
Configure NIX_AF_TL3_TL2X_LINKX_CFG using schq at
level based on NIX_AF_PSE_CHANNEL_LEVEL[BP_LEVEL].
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Adding support to configure link attributes like speed,
duplex, negotiation.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Patch adds routines to set/clear nix lf error & ras interrupt enable
registers. These nix lf error interrupts get triggered if there are
any failures during nix lf configuration. This interrupts are enabled
before any hardware configurations initiated on the allocated nix lf.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Andrzej Ostruszka <aostruszka@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
This patch implements rx/tx checksum offload. In case of
wrong checksum received (inner/outer l3/l4) it reports the
corresponding layer which has bad checksum and also corrects
it if hw checksum is enabled on tx side.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Adding support for setting link up/down eth operation.
It is used to enable disable lmac. Also implemented a
poll function for getting the link status at regular
intervals.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Patch adds support for vlan filter offload support.
MBOX messages for vlan filter on/off and vlan filter
entry add/rm are added to configure PCAM entries to
filter out the vlan traffic on a given port.
Patch also defines rx_offload_flag for vlan filtering.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Harman Kalra <hkalra@marvell.com>
