Not all speed capabilities can be reported properly before Linux 4.8 (25G,
50G and 100G speeds are missing), moreover the API to retrieve them only
exists since Linux 4.5, this commit thus implements compatibility code for
all versions.
Fixes: e274f57322 ("ethdev: add speed capabilities")
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
When verifying the Hash filtering on X722, we found a problem that
the hash value in descriptor is incorrect. The root cause is that X722
uses different way of hash key word selection compared with X710/XL710.
This patch fixes it by setting X722 specific key selection.
Fixes: 98f0557076 ("i40e: configure input fields for RSS or flow director")
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Because some registers are only supported by X722, for example,
I40E_GLQF_FD_PCTYPES, the driver needs to use the mac type to distinguish
the behavior of X722 from X710 and other NICs, or it would result in
errors on X710.
Fixes: 8c5cb3c115 ("net/i40e: add packet type translation for X722")
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
The final parameter to rte_pmd_ixgbe_set_vf_vlan_insert is uint8_t
and treated as a binary flag when it needs to be a uint16_t
and treated as a VLAN id. The data sheet (sect 8.2.3.27.13) describes
the right most 16 bits as the VLAN id that is to be inserted; the
16.11 code is accepting only a 1 or 0 thus effectively only
allowing the VLAN id 1 to be inserted (0 disables the insertion
setting).
This patch changes the final parm name to represent the data that
is being accepted (vlan_id), changes the type to permit all valid
VLAN ids, and validates the parameter based on the range of 0 to
4095. Corresponding changes to prototype and documentation in the
.h file.
Fixes: 49e248223e ("net/ixgbe: add API for VF management")
Signed-off-by: E. Scott Daniels <daniels@research.att.com>
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The QEDE PMD now uses unzipped firmware file eliminating the dependency
on zlib. Hence remove LDLIBS entry form the Makefile and enable qede
PMD by default.
Fixes: 6adac0bf30 ("qede: add missing external dependency and disable by default")
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
o Fix the fastpath status block index such that each queue pair shares
the same index value.
o Add ecore_vf_get_num_sbs() API that returns the number of status
blocks assigned by PF. Use that to decide how many VF queues can be
advertised. Additionally, restrict maximum number of VF queues to 16
for 100G VF case.
Fixes: 2ea6f76aff ("qede: add core driver")
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
This patch fixes the base driver version display.
The driver version notation is:
<Base-Version_PMD-Version>
Fixes: 2ea6f76aff ("qede: add core driver")
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
There is no need to poll for slowpath events for VF
device since the ramrod responses are received over
PF-VF backchannel synchronously. So the fix is to
restrict the slowpath polling for PF device only.
Fixes: 2af14ca79c ("net/qede: support 100G")
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Add support to send PF FLR request to the management firmware to
bringup the device in clean slate. This cleanup is necessary
in some corner cases where the device would be left in a bad
state from its previous operations. The driver will send PF FLR
request before slowpath initialization.
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
This patch contains few RSS related changes as follows:
o Fix inadvertent initializing of rss_params outside of the
if block in qed_update_vport() which could cause FW exception.
o Fix disabling of RSS when hash function is 0.
o Rename qede_config_rss() to qede_check_vport_rss_enable()
for better clarity.
o Avoid code duplication using a helper function
qede_init_rss_caps().
Fixes: 4c98f2768e ("net/qede: support RSS hash configuration")
Fixes: 2ea6f76aff ("qede: add core driver")
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
The device doesn't explicitly support enable/disable
of VLAN filtering. However, VLAN filtering takes effect
when a matching VLAN is configured. So in order to
support enable/disable of VLAN filtering, VLAN 0 is
added/removed respectively. A check is added to ensure that
the user removes all the configured VLANs before disabling
VLAN filtering.
Also VLAN offloads shall be enabled by default and
vlan_tci_outer is to set to 0 for Q-in-Q packets.
Fixes: 2ea6f76 ("qede: add core driver")
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
- fix to prevent duplicate VLAN filters
librte_ether does not keep track of VLAN filters
configured, so it becomes driver's responsibility to
keep track of it and prevent duplicate filter
programming. The fix is to use a singly linked
list for tracking the entries and there by prevent
duplicates.
- fix num vlan filters
Fix num vlan filter when filling Ethernet device information.
Fixes: 2ea6f76aff ("qede: add core driver")
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
This patch fixes the missing 100G link speed advertisement
when the 100G support was initially added.
Fixes: 2af14ca79c ("net/qede: support 100G")
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Add support to allow MTU change on a deactivated vport in
the qede/base driver and the core driver shall utilize the same.
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Some applications set port configuration params like promisc mode
before calling dev_start(). This config results in a firmware exception
since this operation internally translates to sending of VPORT-UPDATE
before VPORT-START ramrod which is considered illegal from firmware
standpoint. So the fix is to send VPORT-START ramrod sooner
in dev_configure() rather than deferring it to dev_start().
This requires a bit of reshuffling in the code to move sending of
VPORT-START from qede_start_queues() to qede_dev_configure()
and VPORT-STOP from qede_stop_queues() to qede_dev_stop().
This sequence change also exposes a flaw in the port restart
flows where the fastpath resource allocation routine qede_init_fp()
functionalities need to be split, so that appropriate action is taken
based on the current port state. Eg: Do not re-initialize the status
block in a port restart case. This change ensures port start/stop
can be paired.
A new port state QEDE_DEV_CONFIG is added to distinguish between
port started from scratch vs port requiring a reconfig (like MTU).
The function qede_config_rx_mode() is removed since the individual
port config will be replayed anyways on a restart.
Fixes: 2ea6f76aff ("qede: add core driver")
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Previous release of the qede PMD had a limitation that the
driver expects the number of tx and rx queues to be the same.
This patch fixes this issue by making appropriate changes in
control and data path.
Fixes: 2ea6f76aff ("qede: add core driver")
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
This patch updates the base driver and incorporates necessary changes
required to bring in the new firmware 8.10.9.0.
In addition, it would allow driver to add new functionalities that might
be needed in future.
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
This patch adds API support for NIC selftests (BIST) and APIs to retrieve
GPIO info, sensor data like temperature, MBA versions, ECC events etc.
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Add ecore_mcp_mb_lock() and ecore_mcp_mb_unlock() APIs to ensure
a single thread is accessing MFW mailbox.
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Change ecore_mcp_cmd_and_union() to accept pointer to a structure rather
than accepting multiple arguments. A new struct ecore_mcp_mb_params is
added for that purpose. Also make this function static. This change is
mostly keeping in mind the future requests which needs additional
arguments.
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Change details:
- adds new comments
- modifies some of the existing comments
- abstract code into macros
- split long lines
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
In case of attention from a signal that's represented by multiple bits
in misc AEU, add the format string which is populated with proper index
and resulting prints will show string as a prefix.
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
- add the hardware software interface(HSI) changes
- add register definitions
These will be required for 8.10.9.0 FW upgrade.
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
Replaced CONFIG_QED_BINARY_FW with CONFIG_ECORE_BINARY_FW.
Use CONFIG_ECORE_BINARY_FW and CONFIG_ECORE_ZIPPED_FW defines as
required.
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
Added ecore_hsi_debug_tools.h, ecore_hsi_init_func.h,
ecore_hsi_init_tool.h files. Rearranged code from ecore_hsi_common.h and
ecore_hsi_tools.h to the new files. Removed unused code.
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
The changes introduced by previous commits (ones in fixes lines) made
secondaries attempt to reinitialize the Tx queue structures of the primary
instead of their own, for which they also do not allocate enough memory,
leading to crashes.
Fixes: 1d88ba1719 ("net/mlx5: refactor Tx data path")
Fixes: 21c8bb4928 ("net/mlx5: split Tx queue structure")
Signed-off-by: Olivier Gournet <ogournet@corp.free.fr>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The SGLORT (Source Global Resource Tag) of the VF queues should be
assigned by PF driver, VF driver should not set these registers.
Fixes: 3b845bf6bc ("fm10k: fix switch manager high CPU usage")
Reported-by: Sarath Somasekharan <sarathx.somasekharan@intel.com>
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
This commit fixes link status report on device start up when
lcs callback is configured.
Fixes: 62072098b5 ("mlx5: support setting link up or down")
Signed-off-by: Olga Shern <olgas@mellanox.com>
In vPMD, when we load Rx desc with _mm_loadu_si128, the volatile
modifier will be cast away, allowing the compiler to reorder the
load instructions.
The Rx recv function's correctness is relying on these load
instructions following a strict sequence, reading the descriptors
in reverse order, so we add compiler barrier to prevent compiler
reorder.
Fixes: 7092be8437 ("fm10k: add vector Rx")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
In vPMD, when we load Rx desc with _mm_loadu_si128, the volatile
modifier will be cast away, allowing the compiler to reorder the
load instructions.
The Rx recv function's correctness is relying on these load
instructions following a strict sequence, reading the descriptors
in reverse order, so we add compiler barrier to prevent compiler
reorder.
Fixes: c95584dc2b ("ixgbe: new vectorized functions for Rx/Tx")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
In vPMD, when we load Rx desc with _mm_loadu_si128, the volatile
modifier will be cast away, allowing the compiler to reorder the
load instructions.
The Rx recv function's correctness is relying on these load
instructions following a strict sequence, reading the descriptors
in reverse order, so we add compiler barrier to prevent compiler
reorder.
Fixes: 9ed94e5bb0 ("i40e: add vector Rx")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This fixes issue found by Coverity where a typo caused the flow director
UDP IPv4 source port mask to be assigned the destination port mask
supplied by the caller.
Coverity issue: 137860
Fixes: dfbd6a9cb5 ("net/enic: extend flow director support for 1300 series")
Signed-off-by: John Daley <johndale@cisco.com>
The rx_free_thresh was not being initialized and left at 0
on 1/2 of the RQs which could lead to poor multi-queue
performance.
Fixes: 856d7ba7ed ("net/enic: support scattered Rx")
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Nelson Escobar <neescoba@cisco.com>
The function names for converting between RQ indexes known to
the RTE code and internal RQ indexes for primary Start of Packet
(SOP) queues and spill-over (Data) queues was unclear and
confusing.
Clarify with more explicit function names.
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Nelson Escobar <neescoba@cisco.com>
The incorrect completion queue corresponding to an RQ would be
freed if multiple Rx queues are in use and the MTU is changed,
or an Rx queue is released. This could lead to a segmentation fault
when the device is disabled or even in the Rx or Tx paths.
The index of the completion queue corresponding to a RQ needed
to be adjusted after Rx scatter was introduced.
Fixes: 856d7ba7ed ("net/enic: support scattered Rx")
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Nelson Escobar <neescoba@cisco.com>
The reason this commit was needed was because of a misconfiguration of
the receive queue when not using Rx scatter. This patch is
unnecessary if the receive queue is configured correctly.
Fixes: d142e1ac10 ("net/enic: fix calculation of truncated packets")
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
The Rx scatter patch was accidentally setting the index of the
secondary receive queue in the primary receive queue's initialization
when the secondary receive queue wasn't needed and was disabled. This
caused some misleading hardware counters in some situations.
Fixes: 856d7ba7ed ("net/enic: support scattered Rx")
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
The vlan mask and tunnel id mask of flow director are defined as big
endian. So they should be converted.
When the mask is printed, the parameters are not converted either.
This patch converts the mask parameters.
Fixes: 7c554b4f04 ("app/testpmd: update display of flow director information")
Fixes: 53b2bb9b7e ("app/testpmd: new flow director commands")
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
