The goal of this change is to fix a problem with PCI shared interrupts
during suspend and resume.
I have observed a couple of variations of the following scenario.
Devices A and B are on the same PCI bus and share the same interrupt.
Device A's driver is suspended first and the device is powered down.
Device B generates an interrupt. Interrupt handlers of both drivers are
called. Device A's interrupt handler accesses registers of the powered
down device and gets back bogus values (I assume all 0xff). That data is
interpreted as interrupt status bits, etc. So, the interrupt handler
gets confused and may produce some noise or enter an infinite loop, etc.
This change affects only PCI devices. The pci(4) bus driver marks a
child's interrupt handler as suspended after the child's suspend method
is called and before the device is powered down. This is done only for
traditional PCI interrupts, because only they can be shared.
At the moment the change is only for x86.
Notable changes in core subsystems / interfaces:
- BUS_SUSPEND_INTR and BUS_RESUME_INTR methods are added to bus
interface along with convenience functions bus_suspend_intr and
bus_resume_intr;
- rman_set_irq_cookie and rman_get_irq_cookie functions are added to
provide a way to associate an interrupt resource with an interrupt
cookie;
- intr_event_suspend_handler and intr_event_resume_handler functions
are added to the MI interrupt handler interface.
I added two new interrupt handler flags, IH_SUSP and IH_CHANGED, to
implement the new intr_event functions. IH_SUSP marks a suspended
interrupt handler. IH_CHANGED is used to implement a barrier that
ensures that a change to the interrupt handler's state is visible
to future interrupts.
While there, I fixed some whitespace issues in comments and changed a
couple of logically boolean variables to be bool.
MFC after: 1 month (maybe)
Differential Revision: https://reviews.freebsd.org/D15755
The error was caused by map_ucode() casting a vm_paddr_t to a void *.
Use a uintptr_t instead to match the caller. Fix some style bugs while
here.
Reported by: bde
Reviewed by: bde
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Bootstacks are unused after APs executed sched_throw() in
init_secondary_tail() and started executing on proper idle thread
stack. Add sysinit that detects that the idle thread for each CPU was
scheduled at least once, and free corresponding bootstack.
Slight addition of the code (~200 bytes) is compensated by the saving,
because even on typical small modern desktop CPU we leak 128K of
memory otherwise (4 pages x 8 threads).
Reviewed by: jhb
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D18486
This moves the architecture independent parts of sys/x86/acpica/srat.c
to sys/dev/acpica/acpi_pxm.c, to be used later on arm64. The function
declarations are moved to sys/dev/acpica/acpivar.h
We also need to update sys/conf/files.{i386,amd64} to use the new file.
No functional changes.
Reviewed by: markj, imp
Differential Revision: https://reviews.freebsd.org/D17941
The SLIT and SRAT ACPI tables needs to be parsed on arm64 as well, on
systems that use UEFI/ACPI firmware and support NUMA. To do this, we
need to move most of the logic of x86/acpica/srat.c to dev/acpica and
provide an API that architectures can use to parse and configure ACPI
NUMA information.
This commit adds the API in srat.c as a first step, without making any
functional changes. We will move the common code to sys/dev/acpica
as the next step.
The functions added are:
* int acpi_pxm_init(int ncpus, vm_paddr_t maxphys) - to allocate and
initialize data structures used
* void acpi_pxm_parse_tables(void) - parse SRAT/SLIT, save the cpu and
memory proximity information
* void acpi_pxm_set_mem_locality(void) - use the saved data to set
memory locality
* void acpi_pxm_set_cpu_locality(void) - use the saved data to set cpu
locality
* void acpi_pxm_free(void) - free data structures allocated by init
On arm64, we do not have an cpu APIC id that can be used as index to
store CPU data, we need to use the Processor Uid. To help with this,
define internal functions cpu_add, cpu_find, cpu_get_info to store
and get CPU proximity information.
Reviewed by: markj, jhb (previous version)
Differential Revision: https://reviews.freebsd.org/D17940
These definitions will be used by a driver to implement Hardware
P-States (autonomous control of HWP, via Intel Speed Shift technology).
Reviewed by: kib
Approved by: emaste (mentor)
Differential Revision: https://reviews.freebsd.org/D18050
Just allow MSI interrupts to always start at the end of the I/O APIC
pins. Since existing machines already have more than 255 I/O APIC
pins, IRQ 255 is no longer reliably invalid, so just remove the
minimum starting value for MSI.
Reviewed by: kib, markj
Differential Revision: https://reviews.freebsd.org/D17991
SDM rev. 068 was released yesterday and it contains the description of
the MSR 0x10a IA32_ARCH_CAP. This change adds symbolic definitions for
all bits present in the document, and decode them in the CPU
identification lines printed on boot.
But also, the document defines SSB_NO as bit 4, while FreeBSD used but
2 to detect the need to work-around Speculative Store Bypass
issue. Change code to use the bit from SDM.
Similarly, the document describes bit 3 as an indicator that L1TF
issue is not present, in particular, no L1D flush is needed on
VMENTRY. We used RDCL_NO to avoid flushing, and again I changed the
code to follow new spec from SDM.
In fact my Apollo Lake machine with latest ucode shows this:
IA32_ARCH_CAPS=0x19<RDCL_NO,SKIP_L1DFL_VME,SSB_NO>
Reviewed by: bwidawsk
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Differential revision: https://reviews.freebsd.org/D18006
The number of MSI IRQs still defaults to 512, but it can now be
changed at boot time via the machdep.num_msi_irqs tunable.
Reviewed by: kib, royger (older version)
Reviewed by: markj
MFC after: 1 month
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D17977
The off-by-one errors in 332735 weren't actual errors and were
preventing the last MSI interrupt source from being used. Instead,
the issue is that when all MSI interrupt sources were allocated, the
loop in msix_alloc() would terminate with 'msi' still set to non-null.
The only check for 'i' overflowing was in the 'msi' == NULL case, so
msix_alloc() would try to reuse the last MSI interrupt source instead
of failing.
Fix by moving the check for all sources being in use to just after the
loop.
Reviewed by: kib, markj
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D17976
We need to know actual value for the standard extended features before
ifuncs are resolved.
Reported and tested by: madpilot
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Avoid using DELAY() since it can try to use spin locks on CPUs without
a P-state invariant TSC. For cpu_lock_delay(), always use the TSC if
it exists (even if it is not P-state invariant) to delay for a
microsecond. If the TSC does not exist, read from I/O port 0x84 to
delay instead.
PR: 228768
Reported by: Roger Hammerstein <cheeky.m@live.com>
Reviewed by: kib
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D17851
This uses slightly simpler logic than the existing code by using the
full 64-bit counter and thus not having to worry about counter
overflow.
Reviewed by: kib
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D17850
On some Intel devices BIOS does not properly reserve memory (called
"stolen memory") for the GPU. If the stolen memory is claimed by the
OS, functions that depend on stolen memory (like frame buffer
compression) can't be used.
A function called pci_early_quirks that is called before the virtual
memory system is started was added. In Linux, this PCI early quirks
function iterates through all PCI slots to check for any device that
require quirks. While this more generic solution is preferable I only
ported the Intel graphics specific parts because I think my
implementation would be too similar to Linux GPL'd solution after
looking at the Linux code too much.
The code regarding Intel graphics stolen memory was ported from
Linux. In the case of Intel graphics stolen memory this
pci_early_quirks will read the stolen memory base and size from north
bridge registers. The values are stored in global variables that is
later read by linuxkpi_gplv2. Linuxkpi stores these values in a
Linux-specific structure that is read by the drm driver.
Relevant linuxkpi code is here:
https://github.com/FreeBSDDesktop/kms-drm/blob/drm-v4.16/linuxkpi/gplv2/src/linux_compat.c#L37
For now, only amd64 arch is suppor ted since that is the only arch
supported by the new drm drivers. I was told that Intel GPUs are
always located on 0:2:0 so these values are hard coded for now.
Note that the structure and early execution of the detection code is
not required in its current form, but we expect that the code will be
added shortly which fixes the potential BIOS bugs by reserving the
stolen range in phys_avail[]. This must be done as early as possible
to avoid conflicts with the potential usage of the memory in kernel.
Submitted by: Johannes Lundberg <johalun0@gmail.com>
Reviewed by: bwidawsk, imp
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D16719
Differential revision: https://reviews.freebsd.org/D17775
Remove malloc_domain(9) and most other _domain KPIs added in r327900.
The new functions allow the caller to specify a general NUMA domain
selection policy, rather than specifically requesting an allocation from
a specific domain. The latter policy tends to interact poorly with
M_WAITOK, resulting in situations where a caller is blocked indefinitely
because the specified domain is depleted. Most existing consumers of
the _domain KPIs are converted to instead use a DOMAINSET_PREF() policy,
in which we fall back to other domains to satisfy the allocation
request.
This change also defines a set of DOMAINSET_FIXED() policies, which
only permit allocations from the specified domain.
Discussed with: gallatin, jeff
Reported and tested by: pho (previous version)
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17418
All platforms except powerpc use the same values and powerpc shares a
majority of them.
Go ahead and declare AT_NOTELF, AT_UID, and AT_EUID in favor of the
unused AT_DCACHEBSIZE, AT_ICACHEBSIZE, and AT_UCACHEBSIZE for powerpc.
Reviewed by: jhb, imp
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17397
This provides a chicken switch for anyone negatively impacted by
enabling NUMA in the amd64 GENERIC kernel configuration. With
NUMA disabled at boot-time, information about the NUMA topology
is not exposed to the rest of the kernel, and all of physical
memory is viewed as coming from a single domain.
This method still has some performance overhead relative to disabling
NUMA support at compile time.
PR: 231460
Reviewed by: alc, gallatin, kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17439
Pre-defined policies are useful when integrating the domainset(9)
policy machinery into various kernel memory allocators.
The refactoring will make it easier to add NUMA support for other
architectures.
No functional change intended.
Reviewed by: alc, gallatin, jeff, kib
Tested by: pho (part of a larger patch)
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17416
The change is a no-op for architectures which don't ifunc memset,
memcpy nor memmove.
Convert places which need them. Xen bits by royger.
Reviewed by: kib
Approved by: re (gjb)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17487
This caused microcode to be updated only on the BSP if hyperthreading
was disabled, typically resulting in a hang or reset.
Approved by: re (kib)
Sponsored by: The FreeBSD Foundation
The AMD Threadripper 2990WX is basically a slightly crippled Epyc.
Rather than having 4 memory controllers, one per NUMA domain, it has
only 2 memory controllers enabled. This means that only 2 of the
4 NUMA domains can be populated with physical memory, and the
others are empty.
Add support to FreeBSD for empty NUMA domains by:
- creating empty memory domains when parsing the SRAT table,
rather than failing to parse the table
- not running the pageout deamon threads in empty domains
- adding defensive code to UMA to avoid allocating from empty domains
- adding defensive code to cpuset to avoid binding to an empty domain
Thanks to Jeff for suggesting this strategy.
Reviewed by: alc, markj
Approved by: re (gjb@)
Differential Revision: https://reviews.freebsd.org/D1683
Use these predicates instead of inline references to vm_min_domains.
Also add a global all_domains set, akin to all_cpus.
Reviewed by: alc, jeff, kib
Approved by: re (gjb)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17278
This simplifies the runtime logic and reduces the number of
runtime-constant branches.
Reviewed by: alc, markj
Sponsored by: The FreeBSD Foundation
Approved by: re (gjb)
Differential revision: https://reviews.freebsd.org/D16736
The atpic_register_sources callback tries to avoid registering interrupt
sources that would collide with an I/O APIC. However, the previous
implementation was failing to register IRQs 8-15 since the slave PIC
saw valid IRQs from the master and assumed an I/O APIC was present. To
fix, go back to registering all 8259A interrupt sources in one loop when
the master's register_sources method is invoked.
PR: 231291
Approved by: re (kib)
MFC after: 1 month
Register interrupts using the PIC pic_register_sources method instead
of doing it in apic_setup_io. This is now required, since the internal
interrupt structures are not yet setup when calling apic_setup_io.
Approved by: re (gjb)
Sponsored by: Citrix Systems R&D
Instead of panicking. Legacy PVH mode doesn't provide a lapic, and
since native_lapic_intrcnt is called unconditionally this would cause
the assert to trigger. Change the assert into a continue in order to
take into account the possibility of systems without a lapic.
Reviewed by: jhb
Approved by: re (gjb)
Sponsored by: Citrix Systems R&D
Differential revision: https://reviews.freebsd.org/D17015
The recommended way to obtain the vcpu id is using the cpuid
instruction with a specific leaf value. This leaf value must be
obtained at runtime, and it's done when populating the hypercall page.
Legacy PVH however will get the hypercall page populated by the
hypervisor itself before booting, so the cpuid leaf was not actually
set, thus preventing setting the vcpu id value from cpuid.
Fix this by making sure the cpuid leaf has been probed before
attempting to set the vcpu id.
Approved by: re (gjb)
Sponsored by: Citrix Systems R&D
That's the only mode in FreeBSD that requires the usage of PIRQs, so
there's no need to attach the PIRQ PIC when running in other modes.
Approved by: re (gjb)
Sponsored by: Citrix Systems R&D
When adding support for the new PVH mode the kenv handling was
switched to use a boot time allocated scratch space, however the
legacy PVH early boot code was not modified to allocate such space.
Approved by: re (gjb)
Sponsored by: Citrix Systems R&D
The vcpu_id for legacy PVH mode can be set from the output of cpuid,
so there's no need to have a special function to set it.
Also note that xenpv_set_ids should have been executed only for PV
guests, but was executed for all guests types and vcpu_id was later
fixed up for HVM guests.
Reported by: cperciva
Approved by: re (gjb)
Sponsored by: Citrix Systems R&D
So that it's done when the vcpu_id has been set. For the BSP the
vcpu_id is set at SUB_INTR, while for the APs it's done in
init_secondary_tail that's called at SUB_SMP order FIRST.
Reported and tested by: cperciva
Approved by: re (gjb)
Sponsored by: Citrix Systems R&D
Differential revision: https://reviews.freebsd.org/D17013
When running as a specific type of Xen guest the hypervisor won't
provide any emulated IO-APICs or legacy PICs at all, thus hitting the
following assert in the MSI code:
panic: Assertion num_io_irqs > 0 failed at /usr/src/sys/x86/x86/msi.c:334
cpuid = 0
time = 1
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xffffffff826ffa70
vpanic() at vpanic+0x1a3/frame 0xffffffff826ffad0
panic() at panic+0x43/frame 0xffffffff826ffb30
msi_init() at msi_init+0xed/frame 0xffffffff826ffb40
apic_setup_io() at apic_setup_io+0x72/frame 0xffffffff826ffb50
mi_startup() at mi_startup+0x118/frame 0xffffffff826ffb70
start_kernel() at start_kernel+0x10
Fix this by removing the assert in the MSI code, since it's possible
to get to the MSI initialization without having registered any other
interrupt sources.
Reviewed by: jhb
Approved by: re (gjb)
Sponsored by: Citrix Systems R&D
Differential revision: https://reviews.freebsd.org/D17001
Previously, x86 used static ranges of IRQ values for different types
of I/O interrupts. Interrupt pins on I/O APICs and 8259A PICs used
IRQ values from 0 to 254. MSI interrupts used a compile-time-defined
range starting at 256, and Xen event channels used a
compile-time-defined range after MSI. Some recent systems have more
than 255 I/O APIC interrupt pins which resulted in those IRQ values
overflowing into the MSI range triggering an assertion failure.
Replace statically assigned ranges with dynamic ranges. Do a single
pass computing the sizes of the IRQ ranges (PICs, MSI, Xen) to
determine the total number of IRQs required. Allocate the interrupt
source and interrupt count arrays dynamically once this pass has
completed. To minimize runtime complexity these arrays are only sized
once during bootup. The PIC range is determined by the PICs present
in the system. The MSI and Xen ranges continue to use a fixed size,
though this does make it possible to turn the MSI range size into a
tunable in the future.
As a result, various places are updated to use dynamic limits instead
of constants. In addition, the vmstat(8) utility has been taught to
understand that some kernels may treat 'intrcnt' and 'intrnames' as
pointers rather than arrays when extracting interrupt stats from a
crashdump. This is determined by the presence (vs absence) of a
global 'nintrcnt' symbol.
This change reverts r189404 which worked around a buggy BIOS which
enumerated an I/O APIC twice (using the same memory mapped address for
both entries but using an IRQ base of 256 for one entry and a valid
IRQ base for the second entry). Making the "base" of MSI IRQ values
dynamic avoids the panic that r189404 worked around, and there may now
be valid I/O APICs with an IRQ base above 256 which this workaround
would incorrectly skip.
If in the future the issue reported in PR 130483 reoccurs, we will
have to add a pass over the I/O APIC entries in the MADT to detect
duplicates using the memory mapped address and use some strategy to
choose the "correct" one.
While here, reserve room in intrcnts for the Hyper-V counters.
PR: 229429, 130483
Reviewed by: kib, royger, cem
Tested by: royger (Xen), kib (DMAR)
Approved by: re (gjb)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D16861
error in the function hypercall_memfree(), where the wrong arena was being
passed to kmem_free().
Introduce a per-page flag, VPO_KMEM_EXEC, to mark physical pages that are
mapped in kmem with execute permissions. Use this flag to determine which
arena the kmem virtual addresses are returned to.
Eliminate UMA_SLAB_KRWX. The introduction of VPO_KMEM_EXEC makes it
redundant.
Update the nearby comment for UMA_SLAB_KERNEL.
Reviewed by: kib, markj
Discussed with: jeff
Approved by: re (marius)
Differential Revision: https://reviews.freebsd.org/D16845
Add pmap_activate_boot() for i386, move the invocation on APs from MD
init_secondary() to x86 init_secondary_tail().
Suggested by: alc
Reviewed by: alc, markj
Sponsored by: The FreeBSD Foundation
Approved by: re (marius)
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D16893
In pre-SMPng, the global 'imen' was used to track mask state of the
hardware interrupts and was aligned to the masks used by spl*().
When the atpic code was converted to using the x86 interrupt source
abstraction, the global 'imen' was preserved by having each PIC
instance point to an invididual byte in the global 'imen' to hold its
8-bit interrupt mask. The global 'imen' is no longer used for
anything however, so rather than storing pointers in 'struct atpic',
just store the individual 8-bit mask for each PIC as a char.
While here, convert the ATPIC macro to using C99 initializers.
Reviewed by: kib, imp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D16827
became unused in FreeBSD 12.x as a side-effect of the NUMA-related
changes.)
Reviewed by: kib, markj
Discussed with: jeff, re@
Differential Revision: https://reviews.freebsd.org/D16825
The MPTable probe code was using PMAP_MAP_LOW as the PA -> VA offset
when searching for the table signature but still using KERNBASE once
it had found the table. As a result, the mpfps table pointed into a
random part of the kernel text instead of the actual MP Table.
Rather than adding more #ifdef's, use BIOS_PADDRTOVADDR from
<machine/pc/bios.h> which already uses PMAP_MAP_LOW on i386 and KERNBASE
on amd64.
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D16802
The support for lazy pmap invalidations on i386 was removed in r281707.
This removes the constant for the IPI and stops accounting for it when
sizing the interrupt count arrays.
Reviewed by: kib
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D16801
At some point memcpy() may be an ifunc, ifunc resolution cannot be done
until CPU identification has been performed, and CPU identification must
be done after loading any microcode updates.
X-MFC with: r337715
Sponsored by: The FreeBSD Foundation
Updates in the format described in section 9.11 of the Intel SDM can
now be applied as one of the first steps in booting the kernel. Updates
that are loaded this way are automatically re-applied upon exit from
ACPI sleep states, in contrast with the existing cpucontrol(8)-based
method. For the time being only Intel updates are supported.
Microcode update files are passed to the kernel via loader(8). The
file type must be "cpu_microcode" in order for the file to be recognized
as a candidate microcode update. Updates for multiple CPU types may be
concatenated together into a single file, in which case the kernel
will select and apply a matching update. Memory used to store the
update file will be freed back to the system once the update is applied,
so this approach will not consume more memory than required.
Reviewed by: kib
MFC after: 6 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D16370
Previously, this check was omitted for the first frame pointer.
Reported by: pho
Reviewed by: kib
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D16572
The timespecadd(3) family of macros were imported from NetBSD back in
r35029. However, they were initially guarded by #ifdef _KERNEL. In the
meantime, we have grown at least 28 syscalls that use timespecs in some
way, leading many programs both inside and outside of the base system to
redefine those macros. It's better just to make the definitions public.
Our kernel currently defines two-argument versions of timespecadd and
timespecsub. NetBSD, OpenBSD, and FreeDesktop.org's libbsd, however, define
three-argument versions. Solaris also defines a three-argument version, but
only in its kernel. This revision changes our definition to match the
common three-argument version.
Bump _FreeBSD_version due to the breaking KPI change.
Discussed with: cem, jilles, ian, bde
Differential Revision: https://reviews.freebsd.org/D14725
the AMD document 55449 'Revision Guide for AMD Family 17h Models
00h-0Fh Processors' rev 1.12.
The errata numbers are mentioned near each action.
It seems that newer BIOSes already include required chicken bits
settings, so the magic MSR updates are only needed when BIOS cannot be
updated. On the other hand, MWAIT avoidance seems to be important.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
In order to setup an initial environment and jump into the generic
hammer_time initialization function. Some of the code is shared with
PVHv1, while other code is PVHv2 specific.
This allows booting FreeBSD as a PVHv2 DomU and Dom0.
Sponsored by: Citrix Systems R&D
Allow the hypercall page to be initialized very early, even before
vtophys is functional. Also make the function global so it can be
called by other files.
This will be needed in order to perform the early bringup on PVHv2
guests.
Sponsored by: Citrix Systems R&D
HYPERVISOR_start_info is only available to PV and PVHv1 guests, HVM
and PVHv2 guests get this data from HVM parameters that are fetched
using a hypercall.
Instead provide a set of helper functions that should be used to fetch
this data. The helper functions have different implementations
depending on whether FreeBSD is running as PVHv1 or HVM/PVHv2 guest
type.
This helps to cleanup generic Xen code by removing quite a lot of
xen_pv_domain and xen_hvm_domain macro usages.
Sponsored by: Citrix Systems R&D
boot_parse_arg to parse a single arg
boot_parse_cmdline to parse a command line string
boot_parse_args to parse all the args in a vector
boot_howto_to_env Convert howto bits to env vars
boot_env_to_howto Return howto mask mased on what's set in the environment.
All these routines return an int that's the bitmask of the args
translated to RB_* flags. As a special case, the 'S' flag sets the
comconsole_speed env var. Any arg that looks like a=b will set the env
key 'a' to value 'b'. If =b is omitted, 'a' is set to '1'. This
should help us reduce the number of redundant copies of these routines
in the tree. It should also give a more uniform experience between
platforms.
Also, invent a new flag RB_PROBE that's set when 'P' is parsed. On
x86 + BIOS, this means 'probe for the keyboard, and if it's not there
set both RB_MULTIPLE and RB_SERIAL (which means show the output on
both video and serial consoles, but make serial primary). Others it
may be some similar concept of probing, but it's loader dependent
what, exactly, it means.
These routines are suitable for /boot/loader and/or the kernel,
though they may not be suitable for the tightly hand-rolled-for-space
environments like boot2.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D16205
- Change pcpu zone consumers to use a stride size of PAGE_SIZE.
(defined as UMA_PCPU_ALLOC_SIZE to make future identification easier)
- Allocate page from the correct domain for a given cpu.
- Don't initialize pc_domain to non-zero value if NUMA is not defined
There are some misconceptions surrounding this field. It is the
_VM_ NUMA domain and should only ever correspond to valid domain
values as understood by the VM.
The former slab size of sizeof(struct pcpu) was somewhat arbitrary.
The new value is PAGE_SIZE because that's the smallest granularity
which the VM can allocate a slab for a given domain. If you have
fewer than PAGE_SIZE/8 counters on your system there will be some
memory wasted, but this is obviously something where you want the
cache line to be coming from the correct domain.
Reviewed by: jeff
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15933
On arm64 (and possible other architectures) we are unable to use static
DPCPU data in kernel modules. This is because the compiler will generate
PC-relative accesses, however the runtime-linker expects to be able to
relocate these.
In preparation to fix this create two macros depending on if the data is
global or static.
Reviewed by: bz, emaste, markj
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D16140
The interface already guarantees that the number of hypercall pages is
always going to be 1, see the comment in interface/arch-x86/cpuid.h
Sponsored by: Citrix Systems R&D
devices present.
On at least one machine where it would matter since the ISA timer is
power gated when booted in the UEFI mode, BIOS still reports that the
legacy devices are present. That is, user still have to manually
disable TSC calibration on such machines. Hopefully it will be more
useful in the future.
Discussed with: Ben Widawsky <benjamin.widawsky@intel.com>
Reviewed by: royger
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D16004
MFC after: 1 week
and also on apic in common and i386 files (except for xen it is optional
only on xenhvm), but it was not ifdefed except on apic in common and i386
files.
This is all that is left from an attempt to build a (sub-)minimal kernel
without any devices. The isa "option" is still used without ifdefs in many
standard files even on amd64. ISAPNP is not optional on at least i386.
ATPIC is not optional on i386 (it is used mainly for Xspuriousint). But
pci is now supposed to be optional on x86.
Expected NMI-s are those than are either generated by the software (such
as a CPU sending NMI to other CPU) or generated by the hardware after
the software configured it to do so (such as NMI-s on PMC events).
Some unexpected NMI-s can be caused by hardware failures and it is
possible to inquire the hardware about them (somewhat like MCA but much
more primitive) using an EISA mechanism. In some cases the origin of
the NMI can remain truly unknown.
This commit should not change any functionality. It just reorganizes
the code, so that it is easier to extend with new checks for the origin
of the NMI. Also, it frees the code that has nothing to do with ISA
from DEV_ISA.
MFC after: 3 weeks
This change adds a new optional console method cn_resume and a kernel
console interface cnresume. Consoles that may need to re-initialize
their hardware after suspend (e.g., because firmware does not care to do
it) will implement cn_resume. Note that it is called in rather early
environment not unlike early boot, so the same restrictions apply.
Platform specific code, for platforms that support hardware suspend,
should call cnresume early after resume, before any console output is
expected.
This change fixes a problem with a system of mine failing to resume when
a serial console is used. I found that the serial port was in a strange
configuration and an attempt to write to it likely resulted in an
infinite loop.
To avoid adding cn_resume method to every console driver, CONSOLE_DRIVER
macro has been extended to support optional methods.
Reviewed by: imp, mav
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D15552
The TSC-s are checked and synchronized only if they were good
originally. That is, invariant, synchronized, etc.
This is necessary on an AMD-based system where after a wakeup from STR I
see that BSP clock differs from AP clocks by a count that roughly
corresponds to one second. The APs are in sync with each other. Not
sure if this is a hardware quirk or a firmware bug.
This is what I see after a resume with this change:
SMP: passed TSC synchronization test after adjustment
acpi_timer0: restoring timecounter, ACPI-fast -> TSC-low
Reviewed by: kib
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D15551
- Add constants for fields in DR6 and the reserved fields in DR7. Use
these constants instead of magic numbers in most places that use DR6
and DR7.
- Refer to T_TRCTRAP as "debug exception" rather than a "trace trap"
as it is not just for trace exceptions.
- Always read DR6 for debug exceptions and only clear TF in the flags
register for user exceptions where DR6.BS is set.
- Clear DR6 before returning from a debug exception handler as
recommended by the SDM dating all the way back to the 386. This
allows debuggers to determine the cause of each exception. For
kernel traps, clear DR6 in the T_TRCTRAP case and pass DR6 by value
to other parts of the handler (namely, user_dbreg_trap()). For user
traps, wait until after trapsignal to clear DR6 so that userland
debuggers can read DR6 via PT_GETDBREGS while the thread is stopped
in trapsignal().
Reviewed by: kib, rgrimes
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D15189
Speculative Store Bypass (SSB) is a speculative execution side channel
vulnerability identified by Jann Horn of Google Project Zero (GPZ) and
Ken Johnson of the Microsoft Security Response Center (MSRC)
https://bugs.chromium.org/p/project-zero/issues/detail?id=1528.
Updated Intel microcode introduces a MSR bit to disable SSB as a
mitigation for the vulnerability.
Introduce a sysctl hw.spec_store_bypass_disable to provide global
control over the SSBD bit, akin to the existing sysctl that controls
IBRS. The sysctl can be set to one of three values:
0: off
1: on
2: auto
Future work will enable applications to control SSBD on a per-process
basis (when it is not enabled globally).
SSBD bit detection and control was verified with prerelease microcode.
Security: CVE-2018-3639
Tested by: emaste (previous version, without updated microcode)
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Install appropriate pti-aware shootdown IPI handlers, otherwise user
page tables do not get enough invalidations. The non-pti handlers
were used so far.
Reported and tested by: cperciva
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
The intent was to disable IBPB and IBRS around MWAIT, and re-enable on
the sleep end.
Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
This change reverts a "while here" part of r333321 that moved clearing
of suspended_cpus to an earlier place.
Apparently, there can be a problem when modifying (shared) memory before
restoring proper cache attributes. So, to be safe, move the clearing to
the old place.
Many thanks to Johannes Lundberg for bisecting the changes to that
particular commit and then bisecting the commit to the particular
change.
Reported by: many
Debugged by: Johannes Lundberg <johalun0@gmail.com>
MFC after: 1 week
X-MFC with: r333321
The idea is to calibrate the LAPIC timer just once and only on boot,
given that [at present] the timer constants are global and shared
between all processors.
My primary motivation is to fix a panic that can happen when dynamically
switching to lapic timer. The panic is caused by a recursion on
et_hw_mtx when printing the calibration results to console. See the
review for the details of the panic.
Also, the code should become slightly simpler and easier to read. The
previous code was racy too. Multiple processors could start calibrating
the global constants concurrently, although that seems to have been
benign.
Reviewed by: kib, mav, jhb
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D15422
Without a subsequent wbinvd the changes to suspended_cpus (and
resuming_cpus) can be lost at least on AMD systems that use MOESI cache
coherency protocol. That can happen because one of APs ends up as an
Owner of the corresponding cache line(s) and the changes may never reach
the main memory before the AP is reset.
While here, move clearing of suspended_cpus a little bit earlier as the
fact of returning from savectx (with zero return value) means that the
CPU has fully restored it execution context.
Also, rework the comment that describes the need for resuming_cpus.
This change fixed suspend to RAM a previously broken AMD-based system.
Reviewed by: kib
Discussed with: bde
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D15295
ifuncs on x86.
Also keep helpers to define 'pseudo-ifuncs' which are emulated by the
indirect jmp.
Reviewed by: jhb (previous version, as part of the larger patch)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D13838
Resume starts CPU from the init state, which clears any loaded
microcode updates. As result, IBRS MSRs are no longer available,
until the microcode is reloaded.
I have to forcibly clear cpu_stdext_feature3, which assumes that CPUID
leaf 7 reg %ebx does not report anything except Meltdown/Spectre bugs
bits. If future CPUs add new bits there, hw_ibrs_recalculate() and
identify_cpu1()/identify_cpu2() need to be adjusted for that.
Submitted and tested by: Michael Danilov <mike.d.ft402@gmail.com>
PR: 227866
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D15236
The APL31 NDA errata is APL30 public errata. Add the reference and
provide the description [2].
Noted by: emaste [2], rpokala [1]
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
If the workaround is activated, always send IPI for wake up, not rely
on the write to the monitor line. This fixes Appolo Lake machines
early hang in sched_bind(), without requiring user to manually select
idle method.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Use designated initializers for the idlt_tlb elements.
Remove strstr() use, add flag field to detect supported MWAIT.
Use nitems() instead of the terminating NULL entry for idle_tlb.
Move several functions into cpu_idle_* namespace.
Based on the discussion with: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
disabled.
Intel finally added this information, which allows us to not parse CPU
identification string looking for the nominal frequency. The leaf is
present e.g. on Appolo Lake Atom CPUs. It is only used if the TSC
calibration is disabled by user.
Also, report the TSC frequency in bootverbose mode always, regardless
of the way it was obtained.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
It is applied before it is possible for idle threads to execute on any
CPU, allowing to work around against some bugs.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Otherwise, under bootverbose, the lapic_enable_cmc() banner 'lapicX:
CMCI unmasked' is printed by several CPUs in parallel, causing garbled
output for the LAPIC dumps.
Reported by: royger
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D15157
machine check banks must be only monitored by single CPU.
Noted and reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D15157
We must ensure that accesses occur, they do not have any other
compiler-visible effects. Bruce found some situations where
optimization could remove an access, and provided a patch to use
volatile qualifier for the state variables. Since volatile behaviour
there is the compiler-specific interpretation of the keyword, use
relaxed atomics instead, which gives exactly the desired semantic.
Noted by and discussed with: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
This sysctl allows a deeper dive into the sleep abyss comparing to
debug.acpi.suspend_bounce. When the new sysctl is set the system will
execute the suspend sequence up to the call to AcpiEnterSleepState().
That includes saving processor contexts and parking APs. Then, instead
of actually entering the sleep state, the BSP will call resumectx() to
emulate the wakeup. The APs should get restarted by the sequence of
Init and Startup IPIs that BSP sends to them.
MFC after: 8 days
x86 enforces an (arbitray) limit on the number of available MSI and
MSI-X interrupts to simplify code (in particular, interrupt_source[]
is statically sized). This means that an attempt to allocate an MSI
vector needs to fail if it would go beyond the limit, but the checks
for exceeding the limit had an off-by-one error. In the case of MSI-X
which allocates interrupts one at a time this meant that IRQ 768 kept
getting handed out multiple times for msix_alloc() instead of failing
because all MSI IRQs were in use.
Tested by: lidl
MFC after: 1 week
The change makes the user and kernel address spaces on i386
independent, giving each almost the full 4G of usable virtual addresses
except for one PDE at top used for trampoline and per-CPU trampoline
stacks, and system structures that must be always mapped, namely IDT,
GDT, common TSS and LDT, and process-private TSS and LDT if allocated.
By using 1:1 mapping for the kernel text and data, it appeared
possible to eliminate assembler part of the locore.S which bootstraps
initial page table and KPTmap. The code is rewritten in C and moved
into the pmap_cold(). The comment in vmparam.h explains the KVA
layout.
There is no PCID mechanism available in protected mode, so each
kernel/user switch forth and back completely flushes the TLB, except
for the trampoline PTD region. The TLB invalidations for userspace
becomes trivial, because IPI handlers switch page tables. On the other
hand, context switches no longer need to reload %cr3.
copyout(9) was rewritten to use vm_fault_quick_hold(). An issue for
new copyout(9) is compatibility with wiring user buffers around sysctl
handlers. This explains two kind of locks for copyout ptes and
accounting of the vslock() calls. The vm_fault_quick_hold() AKA slow
path, is only tried after the 'fast path' failed, which temporary
changes mapping to the userspace and copies the data to/from small
per-cpu buffer in the trampoline. If a page fault occurs during the
copy, it is short-circuit by exception.s to not even reach C code.
The change was motivated by the need to implement the Meltdown
mitigation, but instead of KPTI the full split is done. The i386
architecture already shows the sizing problems, in particular, it is
impossible to link clang and lld with debugging. I expect that the
issues due to the virtual address space limits would only exaggerate
and the split gives more liveness to the platform.
Tested by: pho
Discussed with: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 month
Differential revision: https://reviews.freebsd.org/D14633
opt_compat.h is mentioned in nearly 180 files. In-progress network
driver compabibility improvements may add over 100 more so this is
closer to "just about everywhere" than "only some files" per the
guidance in sys/conf/options.
Keep COMPAT_LINUX32 in opt_compat.h as it is confined to a subset of
sys/compat/linux/*.c. A fake _COMPAT_LINUX option ensure opt_compat.h
is created on all architectures.
Move COMPAT_LINUXKPI to opt_dontuse.h as it is only used to control the
set of compiled files.
Reviewed by: kib, cem, jhb, jtl
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14941
Add the missing breaks in the for loops, in order to exit the loop
when a suitable entry is found.
Also switch amd64 native_start_all_aps to use PHYS_TO_DMAP in order to
find the virtual address of the boot_trampoline and the initial page
tables.
Reported and tested by: pho
Sponsored by: Citrix Systems R&D
So that it doesn't rely on physmap[1] containing an address below
1MiB. Instead scan the full physmap and search for a suitable address
to place the trampoline code (below 1MiB) and the initial memory pages
(below 4GiB).
Sponsored by: Citrix Systems R&D
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D14878
x86/cpu_machdep.c now needs to include elan_mmcr.h when CPU_ELAN is set.
While here, also remove the now unneeded inclusion of isareg.h in i386
and amd64 vm_machdep.c.
Reported by: lwhsu
MFC after: 14 days
X-MFC with: r331878
When I moved these functions from i386 and amd64 to x86 I dropped their
prototype declarations (that were correct) and left only their definitions
that became incorrect.
Reported by: bde
MFC after: 15 days
X-MFC with: r331878
Because I didn't see any reason not too.
I've been making some changes to the code and couldn't help but notice
that the i386 and am64 code was nearly identical.
MFC after: 17 days
platforms. Original commit message as follows:
Only use CPUs in the domain the device is attached to for default
assignment. Device drivers are able to override the default assignment
if they bind directly. There are severe performance penalties for
handling interrupts on remote CPUs and this should only be done in
very controlled circumstances.
Reviewed by: jhb, kib
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14838
These have been supplanted by the MI signal information codes in
<sys/signal.h> since 7.0. The FPE_*_TRAP ones were deprecated even
earlier in 1999.
PR: 226579 (exp-run)
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D14637
assignment. Device drivers are able to override the default assignment
if they bind directly. There are severe performance penalties for
handling interrupts on remote CPUs and this should only be done in
very controlled circumstances.
Reviewed by: jhb, kib
Tested by: pho (earlier version)
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14838
Originally KVM set %eax to 0 in the cpuid leaf 0x4000000 rather than
to the highest supported leaf in the hypervisor "branch". Detect this
case and fixup the %eax value so that the hypervisor is still
detected.
Reported by: jpaetzel
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D14810
Or else disable the device. Note that the detection can be bypassed by
setting the hw.atrtc.enable option in the loader configuration file.
More information can be found on atrtc(4).
Sponsored by: Citrix Systems R&D
Reviewed by: ian
Differential revision: https://reviews.freebsd.org/D14399
from the i8254 driver when I created separate mutexes for each. The i8254
driver could be the active timecounter, leading to recursion during mutex
profiling, but the atrtc driver cannot be a timecounter, so it isn't needed.
un-function-like RTC_LOCK/UNLOCK macro usage into normal function calls.
Since there is no longer any need to handle register access from a debugger
context, those function calls can just be regular mutex lock/unlock calls.
Requested by: bde
command handler which provided much the same information. Removing the
possibility of accessing the hardware regs from the debugger context
paves the way for simplifying the locking code in the driver.
We don't support float in the boot loaders, so don't include
interfaces for float or double in systems headers. In addition, take
the unusual step of spiking double and float to prevent any more
accidental seepage.
Such items may be allocated in the I/O path used by the dumper,
potentially causing the dump to fail. Since there is some precedent
in the DMAR driver for avoiding this problem using _NODUMP, apply
this workaround to the zone as well.
Reported and tested by: mmacy
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D14422
Do not use C constant suffixes. Bit values are small enough to not
require typing, despite they are used for 64bit MSR writes. The added
cast in hw_ibrs_recalculate() is redundand but I prefer to add it for
clarity.
Reported by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
It is coded according to the Intel document 336996-001, reading of the
patches posted on lkml, and some additional consultations with Intel.
For existing processors, you need a microcode update which adds IBRS
CPU features, and to manually enable it by setting the tunable/sysctl
hw.ibrs_disable to 0. Current status can be checked in sysctl
hw.ibrs_active. The mitigation might be inactive if the CPU feature
is not patched in, or if CPU reports that IBRS use is not required, by
IA32_ARCH_CAP_IBRS_ALL bit.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D14029
Use PCID to avoid complete TLB shootdown when switching between user
and kernel mode with PTI enabled.
I use the model close to what I read about KAISER, user-mode PCID has
1:1 correspondence to the kernel-mode PCID, by setting bit 11 in PCID.
Full kernel-mode TLB shootdown is performed on context switches, since
KVA TLB invalidation only works in the current pmap. User-mode part of
TLB is flushed on the pmap activations as well.
Similarly, IPI TLB shootdowns must handle both kernel and user address
spaces for each address. Note that machines which implement PCID but
do not have INVPCID instructions, cause the usual complications in the
IPI handlers, due to the need to switch to the target PCID temporary.
This is racy, but because for PCID/no-INVPCID we disable the
interrupts in pmap_activate_sw(), IPI handler cannot see inconsistent
state of CPU PCID vs PCPU pmap/kcr3/ucr3 pointers.
On the other hand, on kernel/user switches, CR3_PCID_SAVE bit is set
and we do not clear TLB.
I can imagine alternative use of PCID, where there is only one PCID
allocated for the kernel pmap. Then, there is no need to shootdown
kernel TLB entries on context switch. But copyout(3) would need to
either use method similar to proc_rwmem() to access the userspace
data, or (in reverse) provide a temporal mapping for the kernel buffer
into user mode PCID and use trampoline for copy.
Reviewed by: markj (previous version)
Tested by: pho
Discussed with: alc (some aspects)
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
Differential revision: https://reviews.freebsd.org/D13985
When PTI is enabled, empty IDT slots point to rsvd_pti.
Reported by: Dexuan-BSD Cui <dexuan.bsd@gmail.com>
Sponsored by: The FreeBSD Foundation
MFC after: 5 days
When allocating memory through malloc(9), we always expect the amount of
memory requested to be unsigned as a negative value would either stand for
an error or an overflow.
Unsign some values, found when considering the use of mallocarray(9), to
avoid unnecessary casting. Also consider that indexes should be of
at least the same size/type as the upper limit they pretend to index.
MFC after: 3 weeks
Uses of mallocarray(9).
The use of mallocarray(9) has rocketed the required swap to build FreeBSD.
This is likely caused by the allocation size attributes which put extra pressure
on the compiler.
Given that most of these checks are superfluous we have to choose better
where to use mallocarray(9). We still have more uses of mallocarray(9) but
hopefully this is enough to bring swap usage to a reasonable level.
Reported by: wosch
PR: 225197
Kernel Page Table Isolation (KPTI) was introduced in r328083 as a
mitigation for the 'Meltdown' vulnerability. AMD CPUs are not affected,
per https://www.amd.com/en/corporate/speculative-execution:
We believe AMD processors are not susceptible due to our use of
privilege level protections within paging architecture and no
mitigation is required.
Thus default KPTI to off for AMD CPUs, and to on for others. This may
be refined later as we obtain more specific information on the sets of
CPUs that are and are not affected.
Submitted by: Mitchell Horne
Reviewed by: cem
Relnotes: Yes
Security: CVE-2017-5754
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D13971
The implementation of the Kernel Page Table Isolation (KPTI) for
amd64, first version. It provides a workaround for the 'meltdown'
vulnerability. PTI is turned off by default for now, enable with the
loader tunable vm.pmap.pti=1.
The pmap page table is split into kernel-mode table and user-mode
table. Kernel-mode table is identical to the non-PTI table, while
usermode table is obtained from kernel table by leaving userspace
mappings intact, but only leaving the following parts of the kernel
mapped:
kernel text (but not modules text)
PCPU
GDT/IDT/user LDT/task structures
IST stacks for NMI and doublefault handlers.
Kernel switches to user page table before returning to usermode, and
restores full kernel page table on the entry. Initial kernel-mode
stack for PTI trampoline is allocated in PCPU, it is only 16
qwords. Kernel entry trampoline switches page tables. then the
hardware trap frame is copied to the normal kstack, and execution
continues.
IST stacks are kept mapped and no trampoline is needed for
NMI/doublefault, but of course page table switch is performed.
On return to usermode, the trampoline is used again, iret frame is
copied to the trampoline stack, page tables are switched and iretq is
executed. The case of iretq faulting due to the invalid usermode
context is tricky, since the frame for fault is appended to the
trampoline frame. Besides copying the fault frame and original
(corrupted) frame to kstack, the fault frame must be patched to make
it look as if the fault occured on the kstack, see the comment in
doret_iret detection code in trap().
Currently kernel pages which are mapped during trampoline operation
are identical for all pmaps. They are registered using
pmap_pti_add_kva(). Besides initial registrations done during boot,
LDT and non-common TSS segments are registered if user requested their
use. In principle, they can be installed into kernel page table per
pmap with some work. Similarly, PCPU can be hidden from userspace
mapping using trampoline PCPU page, but again I do not see much
benefits besides complexity.
PDPE pages for the kernel half of the user page tables are
pre-allocated during boot because we need to know pml4 entries which
are copied to the top-level paging structure page, in advance on a new
pmap creation. I enforce this to avoid iterating over the all
existing pmaps if a new PDPE page is needed for PTI kernel mappings.
The iteration is a known problematic operation on i386.
The need to flush hidden kernel translations on the switch to user
mode make global tables (PG_G) meaningless and even harming, so PG_G
use is disabled for PTI case. Our existing use of PCID is
incompatible with PTI and is automatically disabled if PTI is
enabled. PCID can be forced on only for developer's benefit.
MCE is known to be broken, it requires IST stack to operate completely
correctly even for non-PTI case, and absolutely needs dedicated IST
stack because MCE delivery while trampoline did not switched from PTI
stack is fatal. The fix is pending.
Reviewed by: markj (partially)
Tested by: pho (previous version)
Discussed with: jeff, jhb
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
The static atrtc_set() function was called only from clock_settime(), so
just move its contents entirely into clock_settime() and delete atrtc_set().
Rename the struct bcd_clocktime variables from 'ct' to 'bct'. I had
originally wanted to emphasize how identical the clocktime and bcd_clocktime
structs were, but things evolved to the point where the structs are not at
all identical anymore, so now emphasizing the difference seems better.
related series of operations without doing a lock/unlock for each byte.
Use them when reading and writing the entire set of time registers.
The original rtcin() and writertc() functions which do lock/unlock on each
byte still exist, because they are public and called by outside code.
Focus on code where we are doing multiplications within malloc(9). None of
these ire likely to overflow, however the change is still useful as some
static checkers can benefit from the allocation attributes we use for
mallocarray.
This initial sweep only covers malloc(9) calls with M_NOWAIT. No good
reason but I started doing the changes before r327796 and at that time it
was convenient to make sure the sorrounding code could handle NULL values.
X-Differential revision: https://reviews.freebsd.org/D13837
New common routines were added to kern/subr_clock.c for converting between
calendrical time expressed in BCD and struct timespec. The new functions
return EINVAL on error, as expected when the clock hardware does not provide
valid time.
PR: 224813
Differential Revision: https://reviews.freebsd.org/D13731 (no reviewers)
allocated with a tag to come from the specified domain if it meets the
other constraints provided by the tag. Automatically create a tag at
the root of each bus specifying the domain local to that bus if
available.
Reviewed by: jhb, kib
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D13545
userspace to control NUMA policy administratively and programmatically.
Implement domainset based iterators in the page layer.
Remove the now legacy numa_* syscalls.
Cleanup some header polution created by having seq.h in proc.h.
Reviewed by: markj, kib
Discussed with: alc
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D13403
Add cpuctl(4) ioctl CPUCTL_EVAL_CPU_FEATURES which forces re-read of
cpu_features, cpu_features2, cpu_stdext_features, and
std_stdext_features2.
The intent is to allow the kernel to see the changes in the CPU
features after micocode update. Of course, the update is not atomic
across variables and not synchronized with readers. See the man page
warning as well.
Reviewed by: imp (previous version), jilles
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D13770
SDM editions 64 and below stated that it is enough to use MFENCe or
LFENCE to serialize x2APIC register writes. New edition 65 requires
either full serialization instruction or MFENCE;LFENCE sequence. Use
the later, FreeBSD needs serialization to ensure that writes done
before IPI request are visible to the target IPI CPU.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
(now: Interrupt_Index[15]) and assigned the previously reserved bits
55:48 (Interrupt_Index[14:0] goes into 63:49 while Destination Field
used 63:56 and bit 48 now is Interrupt_Format) in the IO redirection
tables (see the VT-d specification, "5.1.5.1 I/OxAPIC Programming").
Thus, when not using interrupt remapping, ensure that all previously
reserved bits in the high part of the RTEs are zero instead of doing
a read-modify-write for their Destination Field bits only.
Otherwise, on machines based on Apollo Lake and its derivatives such
as Denverton, typically some of the previously preserved bits remain
set after boot when not employing interrupt remapping. The result is
that INTx interrupts are not getting delivered.
Note: With an AMD IOMMU, interrupt remapping apparently bypasses the
IO APIC altogether.
Submitted by: loos (modulo comment)
Reviewed by: jhb (modulo comment)
platform divergence.
Only architectures which pass arguments in registers (mips)
and platforms which use really weird compilers (any?) would
need to augment the contents of <sys/_stdarg.h>
Convert x86, arm and arm64 architectures to use <sys/_stdarg.h>
being removed from GENERIC in 12. Always print PNP info for ISA when
it exists: it doesn't depend on ISAPNP. Add PNP ID to orm and vga to
prevent us from warning about them since those devices aren't being
removed from GENERIC. PNP devices will be removed from GENERIC too,
but they will be automatically loaded, so need no warning. We don't
warn for non-GENERIC kernels because people running them are presumed
to know what they are doing.
MFC After: 2 weeks
restart_cpus() worked well enough by accident. Before this set of fixes,
resume_cpus() used the same cpuset (started_cpus, meaning CPUs directed to
restart) as restart_cpus(). resume_cpus() waited for the wrong cpuset
(stopped_cpus) to become empty, but since mixtures of stopped and suspended
CPUs are not close to working, stopped_cpus must be empty when resuming so
the wait is null -- restart_cpus just allows the other CPUs to restart and
returns without waiting.
Fix resume_cpus() to wait on a non-wrong cpuset for the ACPI case, and
add further kludges to try to keep it working for the XEN case. It
was only used for XEN. It waited on suspended_cpus. This works for
XEN. However, for ACPI, resuming is a 2-step process. ACPI has already
woken up the other CPUs and removed them from suspended_cpus. This
fix records the move by putting them in a new cpuset resuming_cpus.
Waiting on suspended_cpus would give the same null wait as waiting on
stopped_cpus. Wait on resuming_cpus instead.
Add a cpuset toresume_cpus to map the CPUs being told to resume to keep
this separate from the cpuset started_cpus for mapping the CPUs being told
to restart. Mixtures of stopped and suspended/resuming CPUs are still far
from working. Describe new and some old cpusets in comments.
Add further kludges to cpususpend_handler() to try to avoid breaking it
for XEN. XEN doesn't use resumectx(), so it doesn't use the second
return path for savectx(), and it goes from the suspended state directly
to the restarted state, while ACPI resume goes through the resuming state.
Enter the resuming state early for all cases so that resume_cpus can test
for being in this state and not have to worry about the intermediate
!suspended state for ACPI only.
Reviewed by: kib
it by a transient double mapping for the one instruction in ACPI wakeup
where it is needed (and for many surrounding instructions in ACPI resume).
Invalidate the TLB as soon as convenient after undoing the transient
mapping. ACPI resume already has the strict ordering needed for this.
This fixes the non-trapping of null pointers and other garbage pointers
below NBPDR (except transiently). NBPDR is quite large (4MB, or 2MB for
PAE).
This fixes spurious traps at the first instruction in VM86 bioscalls.
The traps are for transiently missing read permission in the first
VM86 page (physical page 0) which was just written to at KERNBASE in
the kernel. The mechanism is unknown (it is not simply PG_G).
locore uses a similar but larger transient double mapping and needs
it for 2 instructions instead of 1. Unmap the first PDE in it after
the 2 instructions to detect most garbage pointers while bootstrapping.
pmap_bootstrap() finishes the unmapping.
Remove the avoidance of the double mapping for a recently fixed special
case. ACPI resume could use this avoidance (made non-special) to avoid
any problems with the transient double mapping, but no such problems
are known.
Update comments in locore. Many were for old versions of FreeBSD which
tried to map low memory r/o except for special cases, or might have
allowed access to low memory via physical offsets. Now all kernel
maps are r/w, and removal of of the double map disallows use of physical
offsets again.
turn it off by default. It is very inefficient to verify current P-state of
each core, especially for CPUs with many cores. When multiple commands are
requested to the same power domain before completion of pending transitions,
the last command is executed according to the manual. Because requests are
serialized by the caller, all cores will receive the same command for each
call. Do not call sched_bind() and sched_unbind(). It is redundant because
the caller does it anyway.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
Initially, only tag files that use BSD 4-Clause "Original" license.
RelNotes: yes
Differential Revision: https://reviews.freebsd.org/D13133
It is for console presented at 2001 and featuring Pentium III
processor. Even if any of them are still alive and run FreeBSD, we do
not have any sign of life from their users. While removing another
dozens of #ifdefs from the i386 sources reduces the aversion from
looking at the code and improves the platform vitality.
Reviewed by: cem, pfg, rink (XBOX support author)
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D13016
Also keep the calculated vm_page_alloc_contig() flags in the variable
to not re-evaluate it on the loop iteration.
Noted by: alc
Sponsored by: The FreeBSD Foundation
similar to the kernel memory allocator.
This simplifies NUMA allocation because the domain will be known at wait
time and races between failure and sleeping are eliminated. This also
reduces boilerplate code and simplifies callers.
A wait primitive is supplied for uma zones for similar reasons. This
eliminates some non-specific VM_WAIT calls in favor of more explicit
sleeps that may be satisfied without new pages.
Reviewed by: alc, kib, markj
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
- allocate value for new AT_HWCAP2 auxiliary vector on all platforms.
- expand 'struct sysentvec' by new 'u_long *sv_hwcap2', in exactly
same way as for AT_HWCAP.
MFC after: 1 month
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D12699
When it was added in r314636, AMD Thresholding was hardcoded to only
bank 4 (Northbridge) for some reason. However, even on family 10h the
MCAx_MISC register Valid/Present bits determine whether thresholding is
supported on that bank.
Expand thresholding support to monitor all monitorable banks. This
simplifies some of the logic and makes it more consistent with our Intel
CMCI support.
Reviewed by: markj (earlier version)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12321
A new 'u_long *sv_hwcap' field is added to 'struct sysentvec'. A
process ABI can set this field to point to a value holding a mask of
architecture-specific CPU feature flags. If an ABI does not wish to
supply AT_HWCAP to processes the field can be left as NULL.
The support code for AT_EHDRFLAGS was already present on all systems,
just the #define was not present. This is a step towards unifying the
AT_* constants across platforms.
Reviewed by: kib
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D12290
On AMD, the MCG_CAP feature bit is reserved -- not explicitly zero. Do not
use it to determine CMCI support.
Reviewed by: avg, markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12320
Scan all buses for CSR bus, not stopping on the first failed
match. Scan all slots for function 0 on the found bus, for instance on
IvyBridge the slot 0 is not decoded at all. Since the scan is quite
unsafe, and access to the buses is mostly useful for developers,
enable the csr buses scan with the tunable.
Current qpi.c makes too many assumptions about the uncore
configuration buses location and about slots occupied. Also it
restricts itself only to Nehalem CPUs. It is needed on all Core-based
Xeons. On the 2600 v2 (IvyBridge) machine I have access to, the CSR
buses have numbers 31 (BSP socket) and 63 (second socket), and there
is no functions pci0.31.0.0 or pci0.63.0.0. According to the CPU
datasheet, all devices on the uncore bus occupy slots >= 8.
Practically, the attach to config buses is required for the intel-pcm
pcm-memory.x tool to work, for instance.
Reviewed by: jhb (previous version)
Sponsored by: Mellanox Technologies
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D12268
remapping.
VT-d specification requires use of PCI rid as source id for IOAPICs
enumerated by PCI bus. The values from the DMAR ACPI table should be
only used when IOAPIC is not on PCI.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
Hardware provided by: Intel
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D12205
the interrupt messages from given IOAPIC, if the IOAPIC can be
enumerated on PCI bus.
If IOAPIC has PCI binding, match the PCI device against MADT
enumerated IOAPIC. Match is done first by registers window physical
address, then by IOAPIC ID as read from the APIC ID register.
PCI bsf address of the matched PCI device is the rid.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
Hardware provided by: Intel
MFC after: 2 weeks
X-Differential revision: https://reviews.freebsd.org/D12205
17h supports MCA thresholding in the same way as 16h and earlier.
Supposedly a ScalableMca feature bit in CPUID 8000_0007:EBX must be set, but
that was not true for earlier models, so be careful about relying on it.
While here, document a missing bit in LS MCA MISC0.
Reviewed by: truckman
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12237
It doesn't seem necessary to busy the CPU while waiting to transition
into a different p-state.
PR: 221621 (related, but does not completely address)
Reviewed by: truckman
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12260
Fix from fallout introduced in r322348 that moved the cpus array to a
dynamic allocation without zeroing the area.
Reported by: mjg
MFC with: r322348
Reviewed by: mjg
Differential revision: https://reviews.freebsd.org/D12220
Not enabling FSGSBASE in %cr4 does not prevent reporting of the
feature by the CPUID instruction (blame Int*l). As result, kernels
which were run under monitors pretended that usermode cannot modify
TLS base without the syscall, while libc noted right combination of
capable CPU and the new kernel version, trying to use the WRFSBASE
instruction.
Really old hypervisors that cannot handle enablement of these features
in %cr4 would require the manual configuration, by setting the loader
tunable hw.cpu_stdext_disable=0x81
Reported by: lwhsu, mjoras
Sponsored by: The FreeBSD Foundation
MFC after: 18 days
Rather than repeatedly nesting loops, separate concerns with a single loop
per call stack level. Use a table to drive the recursive routine. Handle
missing topology layers more gracefully (infer a single unit).
Analyze some additional optional layers which may be present on e.g. AMD Zen
systems (groups, aka dies, per package; and cachegroups, aka CCXes, per
group).
Display that additional information in the boot-time topology information,
when it is relevent (non-one).
Reviewed by: markj@, mjoras@ (earlier version)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12019
This information is normally available via acpi_perf, but in case it is not,
add support for fetching the information via MSRs on AMD family 17h (Zen)
processors. Zen uses a slightly different formula than previous generation
AMD CPUs.
This was inspired by, but does not fix, PR 221621.
Reported by: Sean P. R. <seanpr AT swbell.net>
Reviewed by: mjoras@
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12082
The Nodes per Processor topology information determines how many bits of the
APIC ID represent the Node (Zeppelin die, on Zen systems) ID. Documented in
Ryzen and Epyc Processor Programming Reference (PPR).
Correct topology information enables the scheduler to make better decisions
on this hardware.
Reviewed by: kib@
Tested by: jeff@ (earlier version)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D11801
Fallout from r322588. I'm not sure why !SMP is a knob we have, but, we have
it.
Reported by: Michael Butler <imb AT protected-networks.net>
Sponsored by: Dell EMC Isilon
Add an option to dynamically rebalance interrupts across cores
(hw.intrbalance); off by default.
The goal is to minimize preemption. By placing interrupt sources on distinct
CPUs, ithreads get preferentially scheduled on distinct CPUs. Overall
preemption is reduced and latency is reduced. In our workflow it reduced
"fighting" between two high-frequency interrupt sources. Reduced latency
was proven by, e.g., SPEC2008.
Submitted by: jeff@ (earlier version)
Reviewed by: kib@
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D10435
removes the only reference to atrtc_set() from outside of atrtc.c, so make
it static.
The xen timer driver registers as a realtime clock with 1us resolution. In
the past that resulted in only the xen timer's clock_settime() getting
called, so it would call atrtc_set() to set the hardware clock as well. As
of r32090, the clock_settime() method of all registered realtime clocks gets
called, so the xen driver no longer needs to chain-call the lower-resolution
driver.
Thanks to royger@ for talking me through the xen stuff, and for testing.
Introduce a new define to take int account the xAPIC ID limit, for
systems where x2APIC is not available/reliable.
Also change some of the usages of the APIC ID to use an unsigned int
(which is the correct storage type to deal with x2APIC IDs as found in
x2APIC MADT entries).
This allows booting FreeBSD on a box with 256 CPUs and APIC IDs up to
295:
FreeBSD/SMP: Multiprocessor System Detected: 256 CPUs
FreeBSD/SMP: 1 package(s) x 64 core(s) x 4 hardware threads
Package HW ID = 0
Core HW ID = 0
CPU0 (BSP): APIC ID: 0
CPU1 (AP/HT): APIC ID: 1
CPU2 (AP/HT): APIC ID: 2
CPU3 (AP/HT): APIC ID: 3
[...]
Core HW ID = 73
CPU252 (AP): APIC ID: 292
CPU253 (AP/HT): APIC ID: 293
CPU254 (AP/HT): APIC ID: 294
CPU255 (AP/HT): APIC ID: 295
Submitted by: kib (previous version)
Relnotes: yes
MFC after: 1 month
Reviewed by: kib
Differential revision: https://reviews.freebsd.org/D11913
So that MAX_APIC_ID can be bumped without wasting memory.
Note that the usage of MAX_APIC_ID in the SRAT parsing forces the
parser to allocate memory directly from the phys_avail physical memory
array, which is not the best approach probably, but I haven't found
any other way to allocate memory so early in boot. This memory is not
returned to the system afterwards, but at least it's sized according
to the maximum APIC ID found in the MADT table.
Sponsored by: Citrix Systems R&D
MFC after: 1 month
Reviewed by: kib
Differential revision: https://reviews.freebsd.org/D11912
Populate the lapics arrays and call cpu_add/lapic_create in the setup
phase instead. Also store the max APIC ID found in the newly
introduced max_apic_id global variable.
This is a requirement in order to make the static arrays currently
using MAX_LAPIC_ID dynamic.
Sponsored by: Citrix Systems R&D
MFC after: 1 month
Reviewed by: kib
Differential revision: https://reviews.freebsd.org/D11911
reduces diff between amd64 and i386. Also, it fixes a regression introduced
in r322076, i.e., identify_hypervisor() failed to identify some hypervisors.
This function assumes cpu_feature2 is already initialized.
Reported by: dexuan
Tested by: dexuan
but it was broken since r273800 (and r278522, its MFC to stable/10) because
identify_cpu() is called too late, i.e., after init_param1().
MFC after: 3 days
In this case we shouldn't assume that the thread has a valid frame pointer.
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D11787
Pollution from counter.h made __pcpu visible in amd64/pmap.c. Delete
the existing extern decl of __pcpu in amd64/pmap.c and avoid referring
to that symbol, instead accessing the pcpu region via PCPU_SET macros.
Also delete an unused extern decl of __pcpu from mp_x86.c.
Reviewed by: kib
Approved by: markj (mentor)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D11666
The mutex protecting access to the registered realtime clock should not be
overloaded to protect access to the atrtc hardware, which might not even be
the registered rtc. More importantly, the resettodr mutex needs to be
eliminated to remove locking/sleeping restrictions on clock drivers, and
that can't happen if MD code for amd64 depends on it. This change moves the
protection into what's really being protected: access to the atrtc date and
time registers.
This change also adds protection when the clock is accessed from
xentimer_settime(), which bypasses the resettodr locking.
Differential Revision: https://reviews.freebsd.org/D11483
--Remove special-case handling of sparc64 bus_dmamap* functions.
Replace with a more generic mechanism that allows MD busdma
implementations to generate inline mapping functions by
defining WANT_INLINE_DMAMAP in <machine/bus_dma.h>. This
is currently useful for sparc64, x86, and arm64, which all
implement non-load dmamap operations as simple wrappers
around map objects which may be bus- or device-specific.
--Remove NULL-checked bus_dmamap macros. Implement the
equivalent NULL checks in the inlined x86 implementation.
For non-x86 platforms, these checks are a minor pessimization
as those platforms do not currently allow NULL maps. NULL
maps were originally allowed on arm64, which appears to have
been the motivation behind adding arm[64]-specific barriers
to bus_dma.h, but that support was removed in r299463.
--Simplify the internal interface used by the bus_dmamap_load*
variants and move it to bus_dma_internal.h
--Fix some drivers that directly include sys/bus_dma.h
despite the recommendations of bus_dma(9)
Reviewed by: kib (previous revision), marius
Differential Revision: https://reviews.freebsd.org/D10729
Do not queue dmar_map_entries with zeroed gseq to
dmar_qi_invalidate_locked(). Zero gseq stops the processing in the qi
task. Do not assign possibly uninitialized on-stack gseq to map
entries when requeuing them on unit tlb_flush queue. Random garbage
in gsec is interpreted as too high invalidation sequence number and
again stop the processing in the task.
Make the sequence numbers generation completely contained in
dmar_qi_invalidate_locked() and dmar_qi_emit_wait_seq(). Upper code
directly passes boolean requesting emiting wait command instead of
trying to provide hint to avoid it by passing NULL gseq pointer.
Microoptimize the requeueing to tlb_flush queue by doing it for the
whole queue.
Diagnosed and tested by: Brett Gutstein <bgutstein@rice.edu>
Discussed with: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
All interrupts are routed to the sole CPU in that case implicitly.
This is a regression in EARLY_AP_STARTUP. Previously the 'assign_cpu'
variable was only set when a multi-CPU system finished booting, so
it's value both meant that interrupts could be assigned and that
there was more than one CPU.
PR: 219882
Reported by: ota@j.email.ne.jp
MFC after: 3 days
Do not try to set LMA bit while CPU is still in legacy mode.
Apparently Intel CPUs ignore non-id writes to LMA, while AMD's
(over-)react with #GP.
Reported and tested by: danfe
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
An extra copy of the system call gate was added to the default LDT back
in 1996 (r18513 / r18514). However, the ability to run BSD/OS 2.1
i386 binaries under FreeBSD's native ABI is most likely no longer
needed.
Discussed with: kib
This patch improves the boundary checks in busdma to allow more cases
using the regular page based kernel memory allocator. Especially in
the case of having a non-zero boundary in the parent DMA tag. For
example AMD64 based platforms set the PCI DMA tag boundary to
PCI_DMA_BOUNDARY, 4GB, which before this patch caused contiguous
memory allocations to be preferred when allocating more than PAGE_SIZE
bytes. Even if the required alignment was less than PAGE_SIZE bytes.
This patch also fixes the nsegments check for using kmem_alloc_attr()
when the maximum segment size is less than PAGE_SIZE bytes.
Updated some comments describing the code in question.
Differential Revision: https://reviews.freebsd.org/D10645
Reviewed by: kib, jhb, gallatin, scottl
MFC after: 1 week
Sponsored by: Mellanox Technologies
operation after processor is configured to allow all required
features.
In particular, NX must be enabled in EFER, otherwise load of page
table element with nx bit set causes reserved bit page fault. Since
malloc uses direct mapping for small allocations, in particular for
the suspension pcbs, and DMAP is nx after r316767, this commit tripped
fault on resume path.
Restore complete state of EFER while wakeup code is still executing
with custom page table, before calling resumectx, instead of trying to
guess which features might be needed before resumectx restored EFER on
its own.
Bisected and tested by: trasz
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
In exceptional circumstances, an MCA exception will trigger when the
freelist is exhausted. In such a case, no error will be logged on the list
and 'mca_count' will not be incremented.
Prior to this patch, all CPUs that received the exception would spin
forever.
With this change, the CPU that detects the error but finds the freelist
empty will proceed to panic the machine, ending the deadlock.
A follow-up to r260457.
Reported by: Ryan Libby <rlibby at gmail.com>
Reviewed by: jhb@
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D10536
in place. To do per-cpu stats, convert all fields that previously were
maintained in the vmmeters that sit in pcpus to counter(9).
- Since some vmmeter stats may be touched at very early stages of boot,
before we have set up UMA and we can do counter_u64_alloc(), provide an
early counter mechanism:
o Leave one spare uint64_t in struct pcpu, named pc_early_dummy_counter.
o Point counter(9) fields of vmmeter to pcpu[0].pc_early_dummy_counter,
so that at early stages of boot, before counters are allocated we already
point to a counter that can be safely written to.
o For sparc64 that required a whole dummy pcpu[MAXCPU] array.
Further related changes:
- Don't include vmmeter.h into pcpu.h.
- vm.stats.vm.v_swappgsout and vm.stats.vm.v_swappgsin changed to 64-bit,
to match kernel representation.
- struct vmmeter hidden under _KERNEL, and only vmstat(1) is an exclusion.
This is based on benno@'s 4-year old patch:
https://lists.freebsd.org/pipermail/freebsd-arch/2013-July/014471.html
Reviewed by: kib, gallatin, marius, lidl
Differential Revision: https://reviews.freebsd.org/D10156
The MFC will include a compat definition of smp_no_rendevous_barrier()
that calls smp_no_rendezvous_barrier().
Reviewed by: gnn, kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D10313
This is applicable only to the older processors that do not have the AMD
Topology extension.
Opteron 6100-series "Magny-Cours" processors had multiple nodes within a
package and didn't have the Topology extension. Without this change
FreeBSD would assume that those processors have a single L3 cache shared
by all cores while, in fact, each node has its own L3 cache.
Many thanks to Freddie Cash <fjwcash@gmail.com> for providing valuable
hardware information.
MFC after: 2 weeks
The change introduced a dependency between genassym.c and header files
generated from .m files, but that dependency is not specified in the
make files.
Also, the change could be not as useful as I thought it was.
Reported by: dchagin, Manfred Antar <null@pozo.com>, and many others
The change seems to be more in the nomenclature than in the way the
topology is advertised by the hardware.
Tested by: truckman (earlier version of the change)
MFC after: 2 weeks
Implement timeouts for register-based DMAR commands. Tunable/sysctl
hw.dmar.timeout specifies the timeout in nanoseconds, set it to zero
to allow infinite wait. Default is 1ms.
Runtime modification of the sysctl is not safe, it is allowed for
debugging.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Kernel environment variable hw.busdma.default can take values 'bounce'
and 'dmar' and selects corresponding busdma backend as default.
Per-device environment variable hw.busdma.pci<domain>.<bus>.<slot>.<func>
takes the same values and overrides hw.busdma.default for the given device.
Note that even with hw.busdma.default=bounce, DMA translation engines
are still started if DMARs are enabled, to disable them use
hw.dmar.dma tunable, as before.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
The change is more intrusive than I would like because the feature
requires that a vector number is written to a special register.
Thus, now the vector number has to be provided to lapic_eoi().
It was readily available in the IO-APIC and MSI cases, but the IPI
handlers required more work.
Also, we now store the VMM IPI number in a global variable, so that it
is available to the justreturn handler for the same reason.
Reviewed by: kib
MFC after: 6 weeks
Differential Revision: https://reviews.freebsd.org/D9880
As noted in the comment, nothing special needs to be done to destroy
the unneeded context after the allocation race, but the context memory
itself still should to be freed.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
It does not make sense since identity mapping already provides the
required mapping for RMRR ranges. More, since identity page tables do
not reflect content of map entries for id domains, creating RMRR
entries makes domain data inconsistent.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
