This adds support for H6 SoC.
Add a CCU driver for H6 that support all PLLs and most of the clocks
that we are intersted in for now (i2c, mmc, usb, etc ...)
MFC after: 1 month
You aren't supposed to changing the freq of a clock when it is
enable so disable the clock before changing the freq and then
re-enable it.
MFC after: 1 month
PLL_MIPI is the last important PLL that we missed.
Add support for it.
Since it's one of the possible parent for TCON0 also add this clock
now that we can.
While here add some info about what video related clocks should be
enabled at boot and with what frequency.
In r350842 I've switched the bus pass to resource so it matches the other
clock drivers but this cannot work as this drivers is meant to match
the dts node '/clocks' and if we don't do it at this pass simplebus is
catching this node and we cannot attach.
This solve booting on Allwinner boards that are still using /clocks (A20 SoC)
MFC after: 3 days
We used the aw_clk_nm clock for clock with only one divider factor
and used a fake multiplier factor. This cannot work properly as we
end up writing the "fake" factor to the register (and so always set
the LSB to 1).
Create a new clock for those.
The reason for not using the clk_div clock is because those clocks are
a bit special. Since they are (almost) all related to video we also need
to set the parent clock (the main PLL) to a frequency that they can support.
As the main PLL have some minimal frequency that they can support we need to
be able to set the main PLL to a multiple of the desired frequency.
Let say you want to have a 71Mhz pixel clock (typical for a 1280x800 display)
and the main PLL cannot go under 192Mhz, you need to set it to 3 times the
desired frequency and set the divider to 3 on the hdmi clock.
So this also introduce the CLK_SET_ROUND_MULTIPLE flag that allow for this kind
of scenario.
- Put all clock and control unit driver in BUS_PASS_RESOURCE except
for the DE2 CCU as it needs the main CCU to be available.
- Use BUS_PASS_CPU for a20_cpu_cfg as it makes more sense.
- For aw_syscon use SCHEDULER pass as we need it early for drivers
that attach in BUS_PASS_SUPPORTDEV
- For the rest we can use BUS_PASS_SUPPORTDEV
is nothing left in the file that related to pwmbus at all. It just contains
prototypes for the functions implemented in dev/pwm.ofw_pwm.c, so name it
accordingly and fix the include protect wrappers to match.
A new pwmbus.h will be coming along in a future commit.
The pwm and pwmbus interfaces were nearly identical, this merges them into a
single pwmbus interface. The pwmbus driver now implements the pwmbus
interface by simply passing all calls through to its parent (the hardware
driver). The channel_count method moves from pwm to pwmbus, and the
get_bus method is deleted (just no longer needed).
The net effect is that the interface for doing pwm stuff is now the same
regardless of whether you're a child of pwmbus, or some random driver
elsewhere in the hierarchy that is bypassing the pwmbus layer and is talking
directly to the hardware driver via cross-hierarchy connections established
using fdt data.
The pwmc driver is now a child of pwmbus, instead of being its sibling
(that's why the get_bus method is no longer needed; pwmc now gets the
device_t of the bus using device_get_parent()).
driver is compiled into the kernel but pwmbus will be loaded as a module
when needed (and because of that, pwmbus_attach_bus() is going away in
the near future). Instead, just directly do what that function did:
register the fdt xfef handle, and attach the pwmbus.
resources if they got allocated (because detach() gets called from attach()
to handle various failures), and delete the pwmbus child if it got created.
Hide unused code under #ifdef notyet (in one case the only caller is under
that same ifdef), or if it is arm (not arm64) specific code under the
__arm__ ifdef to not yield -Wunused-function warnings during the arm64
kernel compile.
MFC after: 2 weeks
Some clocks used the NM type but this clock is for the ones with the
formula "clk = clkin / n / m" and not "clk = clkin * n / m"
Use the new frac clock for them.
Add a clock driver for clock that can either be used in integer mode
with one N factor and one M divider or in fractional mode where the
output frequency is chosen between two predifined output.
This was enumerated with exhaustive search for sys/eventhandler.h includes,
cross-referenced against EVENTHANDLER_* usage with the comm(1) utility. Manual
checking was performed to avoid redundant includes in some drivers where a
common os_bsd.h (for example) included sys/eventhandler.h indirectly, but it is
possible some of these are redundant with driver-specific headers in ways I
didn't notice.
(These CUs did not show up as missing eventhandler.h in tinderbox.)
X-MFC-With: r347984
This allows replacing "sys/eventfilter.h" includes with "sys/_eventfilter.h"
in other header files (e.g., sys/{bus,conf,cpu}.h) and reduces header
pollution substantially.
EVENTHANDLER_DECLARE and EVENTHANDLER_LIST_DECLAREs were moved out of .c
files into appropriate headers (e.g., sys/proc.h, powernv/opal.h).
As a side effect of reduced header pollution, many .c files and headers no
longer contain needed definitions. The remainder of the patch addresses
adding appropriate includes to fix those files.
LOCK_DEBUG and LOCK_FILE_LINE_ARG are moved to sys/_lock.h, as required by
sys/mutex.h since r326106 (but silently protected by header pollution prior
to this change).
No functional change (intended). Of course, any out of tree modules that
relied on header pollution for sys/eventhandler.h, sys/lock.h, or
sys/mutex.h inclusion need to be fixed. __FreeBSD_version has been bumped.
We don't have the display engine driver commited in FreeBSD yet so it is
useless to expose the clocks yet (and also it have not been tested on H5).
Reported by: Manuel Stühn (freebsdnewbie@freenet.de)
PR: 237571
MFC after: 1 week
Allwinner H3 and H5 share many internal components, that's why they can
use the same drivers.
This patch adds the compatible strings to enable clock drivers
probing on Allwinner NanoPI NEO2 device.
Tested on: NanoPi NEO2 (by submitter), OrangePi PC2 (by manu)
Submitted by: Manuel Stühn (freebsdnewbie@freenet.de)
MFC after: 2 months
Differential Revision: https://reviews.freebsd.org/D20069
