The hardware supported by mfi(4) and mrsas(4) use the same dcmd's.
mfiutil(8) in theory could run on controlled attached to mrsas(4).
It can't since mrsas(4) doesn't have support for the FreeBSD mfi(4)
ioctl. Porting the ioctl from mfi(4) to mrsas(4) would be the first
step in making mrsasutil(8) which is an additional name for mfiutil(8)
but opens /dev/mrsasX instead of /dev/mfiX
PR: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=265794
Reviewed by: jhb
Differential revision: https://reviews.freebsd.org/D36342
Tested by: Dan Mahoney <freebsd@gushi.org>
Otherwise POSTREAD syncs may re-invalidate the shadow of the data buffer
when copying from bounce pages, resulting in false-positive KMSAN
reports.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Replacing rtsock with netlink also means providing similar tracing facilities,
rtsock provides `route -n monitor` interface, where each message can be traced
to the originating PID.
This diff closes the feature gap between rtsock and netlink in that regard.
Netlink works slightly differently from rtsock, as it is a generic message
"broker". It calls some kernel KPIs and returns the result to the caller.
Other Netlink consumers gets notified on the changed kernel state using the
relevant subsystem callbacks. Typically, it is close to impossible to pass
some data through these KPIs to enhance the notification.
This diff approaches the problem by using osd(9) to assign the relevant
socket pointer (`'nlp`) to the per-socket taskqueue execution thread.
This change allows to recover the pointer in the aforementioned notification
callbacks and extract some additional data.
Using `osd(9)` (and adding additional metadata) to the notification receiver
comes with some additional cost attached, so this interface needs to be
enabled explicitly by using a newly-created `NETLINK_MSG_INFO` `SOL_NETLINK`
socket option.
The actual medatadata (which includes the originator PID) is provided via
control messages. To enable extensibility, the control message data is
encoded in the standard netlink(TLV-based) fashion. The list of the
currently-provided properties can be found in `nlmsginfo_attrs`.
snl(3) is extended to enable decoding of netlink messages with metadata
(`snl_read_message_dbg()` stores the parsed structure in the provided buffer).
Differential Revision: https://reviews.freebsd.org/D39391
The two main uses of dev_t are in struct stat and as a parameter of the
mknod system calls.
As of version 2.6.0 of the Linux kernel, dev_t is a 32-bit quantity
with 12 bits set asaid for the major number and 20 for the minor number.
The in-kernel dev_t encoded as MMMmmmmm, where M is a hex digit of the
major number and m is a hex digit of the minor number.
The user-space dev_t encoded as mmmM MMmm, where M and m is the major
and minor numbers accordingly. This is downward compatible with legacy
systems where dev_t is 16 bits wide, encoded as MMmm.
In glibc dev_t is a 64-bit quantity, with 32-bit major and minor numbers,
encoded as MMMM Mmmm mmmM MMmm. This is downward compatible with the Linux
kernel and with legacy systems where dev_t is 16 bits wide.
In the FreeBSD dev_t is a 64-bit quantity. The major and minor numbers
are encoded as MMMmmmMm, therefore conversion of the device numbers between
Linux user-space and FreeBSD kernel required.
In between kern_fstat() and translate_fd_major_minor(), another process
having the same filedesc could modify or close fd.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D39763
Get rid of calling Linux stat translation hook and specific to Linux
handling of non-vnode dirfd from kern_statat(),
Reviewed by: kib, mjg
Differential revision: https://reviews.freebsd.org/D35474
As of version 2.6.0 of the Linux kernel, dev_t is a 32-bit unsigned integer
on all platforms. Prior the 2.6 kernel dev_t type was an unsigned short.
However, since the firs commit of the Linuxulator, mknod syscall get int dev
argument.
Also, there is some confusion here, while the kernel declares a dev_t type
as a 32-bit sized, the user-space dev_t type can be size of 64 bits, e.g.,
in the Glibc library.
To avoid confusion and to help porting of the Linuxulator to other platforms
use explicit l_dev_t for dev argument of mknod syscalls.
Just for future changes of the conditional Linuxulator build. We need
a small refactoring of the MI code to help porting Linuxulator to other
platforms.
Fix vfs_emptydir(). It would consider directories containing directories
with name of the form 'X.' (X being any authorized byte) as empty. Also,
it would cause VOP_READDIR() to return an error on directories
containing enough whiteouts. While here, use a more decently sized
buffer as done elsewhere.
Remove ad-hoc iteration on the directory's content and instead use the
newly exported vn_dir_next_dirent() function (this is what fixes the
second problem mentioned above).
PR: 270988
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D39775
Simplify the old interface (one less argument, simpler termination test)
and add documentation about it. Add more sanity checks (mostly under
INVARIANTS, but also in the general case to prevent infinite
loops). Drop the explicit test on minimum directory entry size (without
INVARIANTS).
Deal with the impacts in callers (dirent_exists() and vop_stdvptocnp()).
dirent_exists() has been simplified a bit, preserving the exact same
semantics but for the return code whose meaning has been reversed (0 now
means the entry exists, ENOENT that it doesn't and other values are
genuine errors). While here, suppress gratuitous casts of malloc return
values.
vn_dir_next_dirent() has been tested by a 'make -j4 buildkernel' with a
temporary modification to the VFS cache causing vn_vptocnp() to always
call VOP_VPTOCNP() and finally vop_stdvptocnp() (observed with temporary
debug counters).
Export new _GENERIC_MINDIRSIZ and _GENERIC_MAXDIRSIZ on __BSD_VISIBLE,
and GENERIC_MINDIRSIZ and GENERIC_MAXDIRSIZ on _KERNEL.
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D39764
Move internal-to-'vfs_default.c' get_next_dirent() to 'vfs_vnops.c' and
export it for use by other parts of the VFS. This is a preparatory
change for using it in vfs_emptydir().
No functional change.
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D39755
Otherwise KMSAN only detects uninitialized memory when the contents of
the buffer are copied out to userspace or transmitted to a network
interface. At that point the KMSAN violation will be far removed from
its origin, so let's try to make debugging such problems a bit easier.
Reviewed by: glebius
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D38101
The x18 register isn't useable within FreeBSD kernel space, so we
have to fix the BLAKE3 aarch64 assembly for not using it.
The source files are here: https://github.com/mcmilk/BLAKE3-tests
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes#14728
This was needed before INTRNG was in place and handling the push of
curthread->td_intr_frame. Since INTRNG now handles this, there is no
longer and need for playing around with the frame inside IPI interrupts.
This was needed when intr_ipi_dispatch() was called by hardware-specific
IPI interrupt routines which didn't save the trap frame. Now all ARM
interrupts pass through INTRNG which will have already saved the trap
frame and disabled preemption.
Remove the conditional trapframe/argument passing to the handlers.
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D37938
This cherry-picks upstream:
commit bba7cbf0a4
Author: Alexander Motin <mav@FreeBSD.org>
Date: Wed Apr 26 12:20:43 2023 -0400
Fix positive ABD size assertion in abd_verify().
Gang ABDs without childred are legal, and they do have zero size.
For other ABD types zero size doesn't have much sense and likely
not working correctly now.
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#14795
Sponsored by: Rubicon Communications, LLC ("Netgate")
RFC 4620 is an experimental RFC that can be used to request information
about a host, including:
- the fully-qualified or single-component name
- some set of the Responder's IPv6 unicast addresses
- some set of the Responder's IPv4 unicast addresses
This is not something that should be made available by default.
PR: 257709
Submitted by: ruben@verweg.com
Reviewed by: melifaro
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D39778
This is part one of a fix for booting with ZFS on arm64 using
accelerated checksum implementations. Checksum benchmarking will
attempt to use the FPU, so we currently panic quickly on boot. BLAKE3
is still broken, as it clobbers x18 and we promptly discover that fact
as soon as we attempt to fetch curthread in kfpu_end().
Note that _STANDALONE is special-cased here, but ideally we wouldn't be
building the code that uses kfpu_begin()/kfpu_end() at all in the loader
environment.
Discussed with: imp (a bit)
Differential Revision: https://reviews.freebsd.org/D39448
Similar to the PF_TAG_DUMMYNET we must also clear the route tag if
dummynet didn't keep the packet. In that case we'd continue immediately
and there'd be no need for the route tag. Keeping it could lead to
unexpected routing of traffic.
See also: 27407a6adc
See also: https://redmine.pfsense.org/issues/14055
Sponsored by: Rubicon Communications, LLC ("Netgate")
This eliminates some static bloat in amd64 kernels and reduces the
penalty of increasing MAXCPU. The structures now also maintain NUMA
affinity. No functional change intended.
PR: 269572
Reviewed by: mjg, kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D39807
This avoids bloating the BSS when MAXCPU is large.
No functional change intended.
PR: 269572
Reviewed by: corvink, rew
Tested by: rew
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D39805
The ELF note identifyies the operating-system ABI that the executable
was created for. The note data of the Glibc executable contains the
earliest release number of the Linux kernel that supports this ABI.
As of a current 2.37 version of Glibc, it is 3.2.0 for x86, 3.7.0
for Aarch64.
Glibc does not use this release number and the current kernel's
LINUX_VERSION_CODE to detect kernel features, using fallbacks to known
previous way in case of ENOSYS or something else instead.
A dynamically linked Glibc reads the current kernel's LINUX_VERSION_CODE
from the ELF note in the vDSO or fallback to uname syscall if the vDSO
can't be located and parse the release field in struct utsname. Glibc
uses the current kernel's LINUX_VERSION_CODE for "kernel too old" check.
While here use inlined LINUX_KERNVER for tests to improve readability,
as suggested by emaste@.
MFC after: 1 month
* Move LLT_ADDEDPROXY handling into lltable_link_entry() to
reduct duplication
* Use standard lltable_delete_addr() for entry deletion
* Add (forgotten) call to llt_post_resolved handler after
adding the entry via netlink.
MFC after: 2 weeks
Make Ethernet rules more similar to the usual layer 3 rules by also
allowing ridentifier and labels to be set on them.
Reviewed by: kp
Sponsored by: Rubicon Communications, LLC ("Netgate")
This fixes the detection of pending interrupts when pirval is 0 and the
pending bit is set
More information how this situation occurs, can be found here:
c5b5f2d808/sys/amd64/vmm/intel/vmx.c (L4016-L4031)
Reviewed by: corvink, markj
Fixes: 02cc877968 ("Recognize a pending virtual interrupt while emulating the halt instruction.")
MFC after: 1 week
Sponsored by: vStack
Differential Revision: https://reviews.freebsd.org/D39620
This allows us to support this hardware and, in the future, use clocks
so they are enabled past the initial kernel boot process.
Reviewed by: ray
Differential Revision: https://reviews.freebsd.org/D30103
This commentary was carried over from the x86 version of the same code,
but has actually been inaccurate for a while now. As of FreeBSD 12.x,
all environments are used unless they disable each other. See
39d44f7f15 ("kern_environment: use any provided environments [...]")
for details.
Reviewed by: imp
Differentiala Revision: https://reviews.freebsd.org/D35695
All in-tree implementations of VOP_CLOSE() for filesystems proclaiming
MNTK_EXTENDED_SHARED, are fine with the shared lock for the closed
vnode. I checked the following implementations:
ffs
ext2
ufs
null
tmpfs
devfs
fdescfs
cd9660
zfs
It seems that initial addition of FWRITE check was due to necessity of
handling the VV_TEXT vnode vflag. Since VOP_ADD_WRITECOUNT() only
requires shared lock, we can relax the locking requirement there.
Reviewed by: markj, Olivier Certner <olce.freebsd@certner.fr>
Tested by: Olivier Certner
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D39784
Added disassembly support for each type of str/strb/strh instruction
encoding.
Reviewed by: mhorne
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D39336
The current implementation is wrong, since it unconditionally sets the
amount equal to the <size> field of the instruction. However, when the
<S> bit (scale) is not set, it must be zero.
Also fix a typo, sxts to sxtx, according to the Arm64 documentation.
Reviewed by: mhorne
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D39334
These flags are TCP specific. While here, make also several LRO
internal functions to pass tcpcb pointer instead of inpcb one.
Reviewed by: rrs
Differential Revision: https://reviews.freebsd.org/D39698
This makes inpcb lighter and allows future cache line optimizations
of tcpcb. The reason why HPTS originally used inpcb is the compressed
TIME-WAIT state (see 0d7445193a), that used to free a tcpcb, while the
associated connection is still on the HPTS ring.
Reviewed by: rrs
Differential Revision: https://reviews.freebsd.org/D39697
The purge was intentionally removed in a540cdca31. My assumption
was that the stacks that use the input queue always call the
tcp_handle_orphaned_packets() in their tfb_tcp_fb_fini method.
However, rack will skip doing that if t_fb_ptr is NULL and there are
scenarios when it is NULL, e.g. close(2) on a socket (but some
special close(2)). Instead of working out all possible scenarios
let's put this safebelt back.
Reviewed by: rrs
Differential Revision: https://reviews.freebsd.org/D39696
Mostly mechanical changes, with some reworking in irdma_cm for iterating
over interfaces and addresses. Further rework by Bartosz Sobczak.
Reviewed by: bartosz.sobczak_intel.com
Tested by: mateusz.moga_intel.com
Sponsored by: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D38960
The driver is enormous and rarely used.
text data bss dec hex filename
23076646 1870505 4415872 29363023 0x1c00b4f kernel.before
20017433 1870305 4416000 26303738 0x1915cfa kernel.after
People using the driver will need to add pmspcv_load="YES" to
their loader.conf.
Reviewed by: jhb
Relnotes: yes
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D39816
The declarations for al_eth_lm_retimer_ds25_signal_detect() and
al_eth_lm_retimer_ds25_cdr_lock() say that these functions return
'al_bool', but the definitions actually return 'boolean_t'.
Make the definitions match the declarations.
Reviewed by: jhb, emaste
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D39759
This is the final part, which actually makes boolean_t unsigned. Note
that we do not change its size, nor do we try to change it directly to
bool, since that results in a lot of regressions.
Converting the remaining instances of boolean_t to plain C99 bool can
now be done in a piecemeal fashion, after which boolean_t may hopefully
be retired.
MFC after: 1 week
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D39753
Noticed while attempting to make boolean_t unsigned: some vm-related
function declarations and defintions were using boolean_t where they
should have used int, and vice versa.
MFC after: 1 week
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D39753
Noticed while attempting to change boolean_t into an actual bool: in
include/sys/zfs_ioctl_impl.h, zfs_vfs_held() is declared to return a
boolean_t, but in module/os/freebsd/zfs/zfs_ioctl_os.c it is defined to
return an int. Make the definition match the declaration.
Obtained from: https://github.com/openzfs/zfs/commit/62cc9d4f6
Reviewed by: jhb
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D39753
This is required to announce support for some accelerated AES
operations. AVX512BW indicates support for the AVX512-FP16 extension
and AVX512VL indicates support for the use of AVX512 instructions with
vector lengths smaller than 512 bits.
VAES and VPCLMULQDQ extensions indicate that VEX-prefixed AES-NI and
pclmulqdq instructions are supported.
All of these bits are needed for OpenSSL to use VAES to accelerate
AES-GCM transforms.
Reviewed by: corvink, kib, jhb
MFC after: 2 weeks
Sponsored by: Stormshield
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D39781
A signed one-bit wide bit-field can take only the values 0 and -1. Clang
16 introduced a warning that "implicit truncation from 'int' to a
one-bit wide bit-field changes value from 1 to -1". Fix the warnings by
using C99 bool.
Reported by: Clang 16
Reviewed by: emaste, jhb
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D39705
This reverts commit 4c856fb333.
To quote a pending upstream PR:
This reverts commit 4c856fb to resolve a newly introduced deadlock which
in practice is more disruptive that the issue this commit intended to
address.
Causes deadlocks described in https://github.com/openzfs/zfs/issues/14775
Sponsored by: Rubicon Communications, LLC ("Netgate")
Usage:
zpool set org.freebsd:comment="this is my pool" poolname
Tests are based on zfs_set's user property tests.
Also stop truncating property values at MAXNAMELEN, use ZFS_MAXPROPLEN.
Reviewed by: markj
Approved by: markj
Co-authored-by: Mateusz Piotrowski <0mp@FreeBSD.org>
Obtained from: OpenZFS 8eae2d214c Add support for zpool user properties
Sponsored by: Beckhoff Automation GmbH & Co. KG.
Sponsored by: Klara Inc.
Differential Revision: https://reviews.freebsd.org/D39657
This is a temporary measure until a better fix is sorted out.
Upstream report: https://github.com/openzfs/zfs/issues/14785
Reported by: Evgeniy Khramtsov
Sponsored by: Rubicon Communications, LLC ("Netgate")
This brings in the following commits:
commit 584b574a3b16c6772c8204ec1d1c957c56f22a87
12174 i86pc: variable may be used uninitialized
Author: Toomas Soome <tsoome@me.com>
Reviewed by: John Levon <john.levon@joyent.com>
Reviewed by: Andrew Stormont <astormont@racktopsystems.com>
Approved by: Dan McDonald <danmcd@joyent.com>
commit a25e615d76804404e5fc63897a9196d4f92c3f5e
12371 dis x86 EVEX prefix mishandled
12372 dis EVEX encoding SIB mishandled
12373 dis support for EVEX vaes instructions
12374 dis support for EVEX vpclmulqdq instructions
12375 dis support for gfni instructions
Author: Robert Mustacchi <rm@fingolfin.org>
Reviewed by: Jerry Jelinek <jerry.jelinek@joyent.com>
Approved by: Joshua M. Clulow <josh@sysmgr.org>
commit c1e9bf00765d7ac9cf1986575e4489dd8710d9b1
12369 dis WBNOINVD support
Author: Robert Mustacchi <rm@joyent.com>
Reviewed by: Hans Rosenfeld <hans.rosenfeld@joyent.com>
Reviewed by: Jerry Jelinek <jerry.jelinek@joyent.com>
Reviewed by: Andy Fiddaman <andy@omniosce.org>
Reviewed by: Toomas Soome <tsoome@me.com>
Approved by: Dan McDonald <danmcd@joyent.com>
commit e4f6ce7088a7dd335b9edf4774325f888692e5fb
10893 Need support for new Cascade Lake Instructions
Author: Robert Mustacchi <rm@joyent.com>
Reviewed by: Hans Rosenfeld <hans.rosenfeld@joyent.com>
Reviewed by: Dan McDonald <danmcd@joyent.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Approved by: Gordon Ross <gwr@nexenta.com>
commit cff040f3ef42d16ae655969398f5a5e6e700b85e
10226 Need support for new EPYC ISA extensions
Author: Robert Mustacchi <rm@joyent.com>
Reviewed by: Hans Rosenfeld <hans.rosenfeld@joyent.com>
Reviewed by: Jason King <jason.king@joyent.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Approved by: Dan McDonald <danmcd@joyent.com>
commit d242cdf5288b86d9070d88791c8ee696612becdc
8492 AVX512 dis - legacy logical instructions
Author: Jerry Jelinek <jerry.jelinek@joyent.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Reviewed by: Gordon Ross <gordon.w.ross@gmail.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
commit 81b505b772ab015c588c56bb116239ee549b6eee
8384 AVX512 dis - EVEX prefix support
8385 32-bit avx dis test mishandles EVEX prefix
8386 32-bit bound dis is incorrect
Author: Jerry Jelinek <jerry.jelinek@joyent.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Reviewed by: Gordon Ross <gordon.w.ross@gmail.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
commit 92381362ae635a3bea638d87b7119f1623b6212e
8319 dis support for new xsave instructions
Author: Jerry Jelinek <jerry.jelinek@joyent.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Reviewed by: Gordon Ross <gordon.w.ross@gmail.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
commit a4e73d5d60e566669c550027fae2b1d87b4be2b4
8240 AVX512 dis - opmask instruction support
Author: Jerry Jelinek <jerry.jelinek@joyent.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Reviewed by: Toomas Soome <tsoome@me.com>
Approved by: Gordon Ross <gordon.w.ross@gmail.com>
959b2dfd39979fe8a9a315a52741d009eb168822
7825 want avx dis tests
7826 PCLMULQDQ psuedo-ops aren't properly described in dis
7827 dis tests for f16c, movbe, cpuid, msr, tsc, fence instrs
7828 sysenter and sysexit dis should be allowed in 64-bit x86
Author: Robert Mustacchi <rm@joyent.com>
Reviewed by: Jerry Jelinek <jerry.jelinek@joyent.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
MFC after: 2 weeks
Packet Mark is an analogue to ipfw tags with O(1) lookup from mbuf while
regular tags require a single-linked list traversal.
Mark is a 32-bit number that can be looked up in a table
[with 'number' table-type], matched or compared with a number with optional
mask applied before comparison.
Having generic nature, Mark can be used in a variety of needs.
For example, it could be used as a security group: mark will hold a security
group id and represent a group of packet flows that shares same access
control policy.
Reviewed By: pauamma_gundo.com
Differential Revision: https://reviews.freebsd.org/D39555
MFC after: 1 month
This change adds netlink create/modify/dump interfaces to the `if_clone.c`.
The previous attempt with storing the logic inside `netlink/route/iface_drivers.c`
did not quite work, as, for example, dumping interface-specific state
(like vlan id or vlan parent) required some peeking into the private interfaces.
The new interfaces are added in a compatible way - callers don't have to do anything
unless they are extended with Netlink.
Reviewed by: kp
Differential Revision: https://reviews.freebsd.org/D39032
MFC after: 1 month
Allow new features to be supported without changing the size of
existing structures.
Reviewed by: kib
Sponsored by: Arm Ltd
Differential Revision: https://reviews.freebsd.org/D39777
The MT2 uses a compact report format, but otherwise is similar in many
ways to the internal trackpads, it even uses the same mode switching
commands.
Reviewed by: wulf
MFC after: 1 month
Differential revision: https://reviews.freebsd.org/D34437
The pseudo file systems (devfs, fdescfs, procfs, etc.) report total
and available blocks and inodes despite being synthetic with no
underlying storage device to which those values could be applied.
The current code of these file systems tends to report a fixed number
of total blocks but no free blocks, and in the case of procfs,
libprocfs, linsysfs also no free inodes.
This can be irritating in e.g. the "df" output, since 100% of the
resources seem to be in use, but it can also create warnings in
monitoring tools used for capacity management.
This patch makes these file systems return the same value for the
total and free parameters, leading to 0% in use being displayed by
"df". Since there is no resource that can be exhausted, this appears
to be a sensible result.
Reviewed by: mckusick
Differential Revision: https://reviews.freebsd.org/D39442
Some combinations of FAT12 file system parameters could cause a kernel
panic due to an unmapped access if the size of the FAT was larger than
the CPU page size. The reason is that FAT12 uses 3 bytes to store
2 FAT pointers, leading to partial FAT pointers at the end of buffers
of a size that is not a multiple of 3.
With a typical page size of 4 KB, this caused the FAT entry at byte
offsets 4095 and 4096 to cross the page boundary, with only the first
page mapped. This was fixed by adjusting the mapping to always cover
both bytes of each FAT entry.
Testing revealed 2 other inconsistencies that are fixed by this commit:
1) The calculation of the size of the data area did not take into
account the fact that the first two data block numbers are reserved
and that the data area starts with block 2. This could cause a
FAT12 file system created with the maximum supported number of
blocks to be incorrectly identified as FAT16.
2) The root directory does not take up space in the data area of a
FAT12 or FAT16 file system, since it is placed into a reserved
area outside of that data area. This commits makes stat() report
the logical size of the root directory, but with 0 blocks allocated
from the data area.
PR: 270587
Reviewed by: mckusick
Differential Revision: https://reviews.freebsd.org/D39386
This is the historical (and still current) behavior, as well as that of
NetBSD, OpenBSD, illumos and Linux (getdents()/getdents64()).
Reviewed by: kib
MFC after: 3 days
Nothing should be directly touching the ifnet members, which are hidden
in <net/if_private.h>, so hide them in the same header to avoid errors
from users.
Sponsored by: Juniper Networks, Inc.
Summary:
Trivial changes for LinuxKPI to use IfAPI. The 'bsdifp' looks unused,
so removed it instead of converting it to a pointer.
Bump __FreeBSD_version for change to struct net_device.
Reviewed by: bz, hselasky
Sponsored by: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D39491
This function needs to unmap all memory in a given SMMU context. Have
it iterate over all page table entries to find what has been mapped
rather than looking at virtual addresses.
While here use SMMU specific macros.
Sponsored by: Arm Ltd
Differential Revision: https://reviews.freebsd.org/D39185
This is not managed through the VM subsystem so only needs to hold the
data the SMMU driver needs.
Sponsored by: Arm Ltd
Differential Revision: https://reviews.freebsd.org/D39184
Now the PCI drivers have a common interface to read the IOMMU xref
and SID create a common function to read it. This fixes an issue where
we will call into an ACPI specific function when booting with FDT when
both are enabled.
Sponsored by: Arm Ltd
Differential Revision: https://reviews.freebsd.org/D39183
Teach the pci host generic ACPI attachment about PCI_ID_OFW_IOMMU. This
will be used by the arm64 smmu IOMMU driver to read the xref and ID
this interface provides in a bus-agnostic way.
Sponsored by: Arm Ltd
Differential Revision: https://reviews.freebsd.org/D39182
Use the xref from OF_xref_from_node for the smmu xref. We already have
a valid xref ID, there is no need to convert this to a memory address.
Sponsored by: Arm Ltd
Differential Revision: https://reviews.freebsd.org/D39181
Add a n attachment to the pci_host_generic driver for the Arm DEN0115
PCI Configuration Space Access Firmware Interface [1]. This can be used
when PCI controllers need to implement quirks in the PCI root bus.
To handle this the firmware implements a SMCCC interface the driver can
use to read and write the configuration register.
This has been tested on a Raspberry Pi 4 booting with EDK2.
[1] https://developer.arm.com/documentation/den0115/latest
Sponsored by: Arm Ltd
Differential Revision: https://reviews.freebsd.org/D39228
To allow for attachments that don't use memory mapped registers add
a flag they can set when the base driver shouldn't map them.
Sponsored by: Arm Ltd
Differential Revision: https://reviews.freebsd.org/D39227
When mapping the arm64 KASAN shadow map we use Ln_TABLE_MASK to align
physical addresses, however these should already be aligned either
by rounding to a greater alignment, or the VM subsystem is giving us
a correctly aligned page.
Remove these extra alignment masks.
Reviewed by: kevans
Sponsored by: Arm Ltd
Differential Revision: https://reviews.freebsd.org/D39752
hid_input is equal to 0. It is leftover from NetBSD code.
Reviewed by: hselasky, wulf
MFC after: 1 month
Differential revision: https://reviews.freebsd.org/D28149
Also adds fixups and cleanups:
- apply the child's mode/speed
- implement suspend/resume support
- use RF_SHAREABLE interrupts
- use bus_delayed_attach_children since the transfer can use interrupts
- add support for newly added spibus features (cs_delay and flags)
Operation tested on Broadwell (Wildcat Point) MacBookPro12,1.
Attachment also tested on Kaby Lake (Sunrise Point) Pixelbook.
Reviewed by: wulf
MFC after: 1 month
Differential revision: https://reviews.freebsd.org/D29249
These feature are required for an upcoming Apple MacBook topcase
(HID over SPI) driver:
A delay after toggling CS is required to avoid anomalies like an extra
junk byte in front of the message. Keeping CS asserted is required to
be able to read a status report after writing a command. (The device
won't return the status if CS was deasserted.)
Sleep is not allowed in the interrupt context where the Apple input
driver runs its transactions. Use a flag to tell the SPI driver to
avoid mtx_sleep.
Reviewed by: manu (ok to SPI part of larger patch)
MFC afret: 1 month
Differential revision: https://reviews.freebsd.org/D29534
Import ISC-licensed ath10k driver assumed to be
based on Linux kvalo/ath.git master at
6bae9de622d3ef4805aba40e763eb4b0975c4f6d.
Import support to redirect fwlogs to kernel messages
from https://chromium-review.googlesource.com/c/chromiumos/third_party/kernel/+/389075
Complement the driver to make compile on FreeBSD
using LinuxKPI with changes covered by #ifdef (__FreeBSD__).
Further select updates were applied since the initial import
in order to keep compiling along with other LinuxKPI based
drivers.
Any other native driver using BUS_PROBE_DEFAULT will attach
ignoring this one by default given bsd_probe_return is set
to a lower priority.
Add the module build framework.
We only support PCI parts.
The firmware is provided by port net/wifi-firmware-ath10k-kmod.
Given the lack of full license texts on most files this is
imported under the draft policy for handling SPDX files (D29226). [1]
Approved by: core (emaste, 2022-04-08) [1]
MFC after: 2 months
Import common ISC-licensed athk parts assumed to be
based on Linux kvalo/ath.git master at
6bae9de622d3ef4805aba40e763eb4b0975c4f6d.
The only modification should be for FreeBSD module
handling in main.c.
Add the module build framework unconnected to the
build for now.
These files will be shared by ath1?k drivers.
MFC after: 2 months
Add files needed by ath1?k drivers to linuxkpi/linuxkpi_wlan.
This contain (skeleton) implementations of what is needed to
compile but specifically mhi/qmi/qrtr will need more work for
ath11k.
MFC after: 2 months
Import ISC-licensed driver parts of mediatek/mt76
assumed to be based on Linux wireless-testing at
a02411a5b98612c12be99349836d99f07db12a77 (tag: wt-2022-11-23).
Complement the driver and LinuxKPI with our own (dummy)
implementations of missing parts (util.h and soc/mediatek/)
as well as changes to make compile on FreeBSD with changes
covered by #ifdef (__FreeBSD__) conditions.
Further select updates were applied since the initial import
in order to keep compiling along with other LinuxKPI based
drivers.
For the moment we only target the mt7915 and mt7921 PCI parts.
More may follow in the future.
Firmware is provided by port net/wifi-firmware-mt76-kmod.
Given the lack of full license texts on non-local files this is
imported under the draft policy for handling SPDX files (D29226). [1]
Approved by: core (emaste, 2022-04-08) [1]
MFC after: 2 months
Summary:
After https://github.com/llvm/llvm-project/commit/b4257d3bf58c ("[tsan]
Replace mem intrinsics with calls to interceptors") intrinsic calls to
memcpy, memmove or memset will directly call sanitizer interceptors,
e.g. __tsan_memcpy, __tsan_memmove or __tsan_memset.
Building GENERIC-KCSAN with clang >= 16 would thus result in link errors
similar to:
ld: error: undefined symbol: __tsan_memcpy
>>> referenced by cam_compat.c:150 (/usr/src/sys/cam/cam_compat.c:150)
>>> cam_compat.o:(cam_compat_handle_0x17)
>>> referenced by cam_compat.c:151 (/usr/src/sys/cam/cam_compat.c:151)
>>> cam_compat.o:(cam_compat_handle_0x17)
>>> referenced by cam_compat.c:152 (/usr/src/sys/cam/cam_compat.c:152)
>>> cam_compat.o:(cam_compat_handle_0x17)
>>> referenced 1692 more times
Similar to subr_msan.c, add aliases from the existing kcsan_* versions
of these functions to __tsan_* names.
Reviewed by: markj
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D39772
It appears that PAC registers are configured to trap upon access, but
since the kernel starts in EL1 on this platform it has no ability to
inspect or modify this configuration. Simply disable PAC on this
platform for now, since the kernel otherwise hangs during boot.
PR: 270472
Reviewed by: andrew, emaste
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D39748
- In _in_pcbinshash_wild(), we should avoid returning v6 sockets unless
no other matches are available. This preserves pre-existing
semantics.
- Fix an inverted test: when inserting a non-jailed PCB, we want to
search for the first non-jailed PCB in the hash chain.
- Test the right PCB when searching for a non-jailed PCB.
While here, add a required locking assertion.
Fixes: 7b92493ab1 ("inpcb: Avoid inp_cred dereferences in SMR-protected lookup")
In pcie_capability_read_*() always initialize the return value to
avoid warnings of uninitialized values in callers.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D39721
While experimenting with changing boolean_t to another type, I noticed
that several powerpc pmap related functions returned the wrong type:
boolean_t instead of int.
Fix several declarations and definitions to match the actual pmap
function types: pmap_dev_direct_mapped_t and pmap_ts_referenced_t.
MFC after: 3 days
As the flag M_WAITOK is passed to ip_encap_attach(), then the function
will never return NULL, and the following code within NULL check branch
will be unreachable.
No functional change intended.
Reviewed by: kp
Fixes: 6d8fdfa9d5 Rework IP encapsulation handling code
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D39746
As the flag M_WAITOK is passed to ip_encap_attach(), then the function
will never return NULL, and the following code within NULL check branch
will be unreachable.
No functional change intended.
Reviewed by: kp
Fixes: 6d8fdfa9d5 Rework IP encapsulation handling code
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D39746
Linux kernel version 5.15 named Trick or Treat is a 22nd LTS release.
Reviewed by: trasz, emaste
Differential Revision: https://reviews.freebsd.org/D39649
MFC after: 1 month
AT_EXECFN has appeared in the 2.6.26 Linux kernel first time.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D39647
MFC after: 1 month
AT_RANDOM has appeared in the 2.6.30 Linux kernel first time.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D39646
MFC after: 1 month