VXLAN UDP/IPv4 GRO can help improve VM-to-VM UDP
performance when UFO or GSO is enabled in VM, GRO
must be supported if UFO or GSO is enabled,
otherwise, performance can't get big improvement
if only GSO is there.
With this enabled in DPDK, OVS DPDK can leverage it
to improve VM-to-VM UDP performance, it will reassemble
VXLAN UDP/IPv4 fragments immediate after they are
received from a physical NIC. It is very helpful in
OVS DPDK VXLAN use case.
Signed-off-by: Yi Yang <yangyi01@inspur.com>
Acked-by: Jiayu Hu <jiayu.hu@intel.com>
UDP/IPv4 GRO can help improve VM-to-VM UDP performance
when UFO or GSO is enabled in VM, GRO must be supported
if UFO or GSO is enabled, otherwise, performance can't
get big improvement if only GSO is there.
With this enabled in DPDK, OVS DPDK can leverage it
to improve VM-to-VM UDP performance, it will reassemble
UDP fragments immediate after they are received from
a physical NIC. It is very helpful in OVS DPDK VLAN use
case.
Signed-off-by: Yi Yang <yangyi01@inspur.com>
Acked-by: Jiayu Hu <jiayu.hu@intel.com>
Currently, rte_ipv4_cksum() and rte_ipv4_udptcp_cksum() assume all IPv4
headers have sizeof(struct rte_ipv4_hdr) bytes. This is not true for
those (rare) packets with IPv4 options. Thus, both IPv4 and TCP/UDP
checksums are calculated wrong.
This patch fixes the issue by using the actual IPv4 header length from
the packet's IHL field.
Signed-off-by: Michael Pfeiffer <michael.pfeiffer@tu-ilmenau.de>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Move symbols introduced in version <= 19.11 in the stable ABI.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Remove the deprecated v20 ABI of rte_mempool_populate_iova() and
rte_mempool_populate_virt().
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
RCU library supporting quiescent state was introduced
in 19.05 release and has been around 4 releases, it
should be mature enough to remove the experimental tag.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: David Christensen <drc@linux.vnet.ibm.com>
Since rte_mcslock APIs were introduced in 19.08 release,
it is now possible to remove the experimental tag from:
rte_mcslock_lock()
rte_mcslock_unlock()
rte_mcslock_trylock()
rte_mcslock_is_locked()
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Phil Yang <phil.yang@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: David Christensen <drc@linux.vnet.ibm.com>
As rte_ticketlock was introduced in 19.05 release
and there were no changes in its public API since
19.11 release, it should be mature enough to remove
the experimental tag.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: David Christensen <drc@linux.vnet.ibm.com>
rte_wait_until_equal_xx APIs were introduced in 19.11 release
and there were no changes in the public APIs since then, it
should be mature enough to remove the experimental tag.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: David Christensen <drc@linux.vnet.ibm.com>
This is something we encountered while working in an OpenShift
environment with SELinux enabled.
In this environment, a DPDK application could create/write to hugepage
files but removing them was refused.
This resulted in dirty files being reused when starting a new DPDK
application and triggered random crashes / erratic behavior.
Getting a SELinux setup can be a challenge, and even more if you add
containers to the picture :-).
So here is a reproducer for the interested testers:
# cat >wrap.c <<EOF
#define _GNU_SOURCE
#include <dlfcn.h>
#include <errno.h>
#include <stdio.h>
#include <string.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <unistd.h>
int unlink(const char *pathname)
{
static int (*orig)(const char *pathname) = NULL;
struct stat st;
if (orig == NULL)
orig = dlsym(RTLD_NEXT, "unlink");
if (strstr(pathname, "rtemap_") != NULL &&
stat(pathname, &st) == 0) {
fprintf(stderr, "### refused unlink for %s\n",
pathname);
errno = EACCES;
return -1;
}
fprintf(stderr, "### called unlink for %s\n", pathname);
return orig(pathname);
}
int unlinkat(int dirfd, const char *pathname, int flags)
{
static int (*orig)(int dirfd, const char *pathname, int flags) =
NULL;
struct stat st;
if (orig == NULL)
orig = dlsym(RTLD_NEXT, "unlinkat");
if (strstr(pathname, "rtemap_") != NULL &&
fstatat(dirfd, pathname, &st, flags) == 0) {
fprintf(stderr, "### refused unlinkat for %s\n",
pathname);
errno = EACCES;
return -1;
}
fprintf(stderr, "### called unlinkat for %s\n", pathname);
return orig(dirfd, pathname, flags);
}
EOF
# gcc -fPIC -shared -o libwrap.so wrap.c -ldl
# \rm /dev/hugepages/rtemap*
# # First run is fine
# LD_PRELOAD=libwrap.so dpdk-testpmd -w 0000:01:00.0 -- -i
[...]
Configuring Port 0 (socket 0)
Port 0: 24:6E:96:3C:52:D8
Checking link statuses...
Done
testpmd>
# # Second run we have dirty memory
# LD_PRELOAD=libwrap.so dpdk-testpmd -w 0000:01:00.0 -- -i
[...]
### refused unlinkat for rtemap_0
[...]
Port 0 is now not stopped
Please stop the ports first
Done
testpmd>
Removing hugepage files is done in multiple places and the memory
allocation code is complex.
This fix tries to do the minimum and avoids touching other paths.
If trying to remove the hugepage file before allocating a page fails,
the error is reported to the caller and the user will see a memory
allocation error log.
Fixes: 582bed1e1d ("mem: support mapping hugepages at runtime")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Enhance the dump function to also print socket_id attribute
passed at creation time.
Signed-off-by: Sachin Saxena <sachin.saxena@oss.nxp.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Sequences like "value = %"PRIu64 (no space before PRIu64) are parsed as
a single preprocessor token, user-defined-string-literal, in C++11
onwards. While modern compilers are smart enough to parse this properly,
GCC 9.3.0 generates warnings like:
rte_rcu_qsbr.h:555:26: warning: invalid suffix on literal; C++11
requires a space between literal and string macro [-Wliteral-suffix]
Add spaces around format specifier macros to make public headers
compatible with C++ without causing warnings. Make similar changes in C
source for style consistency within the library.
Fixes: 64994b56c ("rcu: add RCU library supporting QSBR mechanism")
Cc: stable@dpdk.org
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
The stack library was first released in 19.05, and its interfaces have been
stable since their initial introduction. This commit promotes the full
interface to stable, starting with the 20.11 major version.
Signed-off-by: Gage Eads <gage.eads@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Some new APIs were added to the timer library in the 19.05 release, and
there have been no changes to their interfaces since then. These
functions can be considered stable enough to remove their 'experimental'
tag.
Signed-off-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Remove ABI versioning for APIs:
'rte_meter_trtcm_rfc4115_profile_config()'
'rte_meter_trtcm_rfc4115_config()'
The alias was introduced in
commit 60197bda97 ("meter: provide experimental alias for matured API")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
The issue is that a file descriptor at 0 is a valid one. Currently
the file not found, the return value will be set to 0. As a result,
it is impossible to distinguish between a correct descriptor and a
failed return value. Fix it to return -ENOENT instead of 0.
Fixes: b758423bc4 ("vfio: fix race condition with sysfs")
Fixes: ff0b67d1c8 ("vfio: DMA mapping")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Build the lib for Windows.
Export the needed function from eal.
Signed-off-by: Ophir Munk <ophirmu@nvidia.com>
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Tested-by: Pallavi Kadam <pallavi.kadam@intel.com>
Acked-by: Pallavi Kadam <pallavi.kadam@intel.com>
Clang builds use getopt.c in librte_eal while MinGW provides
implementation as part of the toolchain. Statically linking librte_eal
to an application that depends on getopt results in undefined reference
errors with MinGW. There are no such errors with Clang, because with
Clang librte_eal actually defines getopt functions.
Use getopt.c in EAL with Clang and MinGW to get identical behavior.
Adjust code for MinGW. Incidentally, this removes a bug when free() is
called on uninitialized memory.
Fixes: 5e373e456e ("eal/windows: add getopt implementation")
Cc: stable@dpdk.org
Reported-by: Khoa To <khot@microsoft.com>
Reported-by: Tal Shnaiderman <talshn@nvidia.com>
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Khoa To <khot@microsoft.com>
Acked-by: Pallavi Kadam <pallavi.kadam@intel.com>
reallocarray has been introduced in glibc 2.26 but we still support
glibc >= 2.7.
Simply replace with realloc, as the considered sizes are unlikely to
overflow.
"""
The reallocarray() function changes the size of the memory block
pointed to by ptr to be large enough for an array of nmemb elements,
each of which is size bytes. It is equivalent to the call
realloc(ptr, nmemb * size);
However, unlike that realloc() call, reallocarray() fails safely in
the case where the multiplication would overflow. If such an over‐
flow occurs, reallocarray() returns NULL, sets errno to ENOMEM, and
leaves the original block of memory unchanged.
"""
Fixes: 3ca60ceed7 ("pipeline: add SWX pipeline specification file")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Dequeue zero-copy removal was announced in DPDK v20.08.
This feature brings constraints which makes the maintenance
of the Vhost library difficult. Its limitations makes it also
difficult to use by the applications (Tx vring starvation).
Removing it makes it easier to add new features, and also remove
some code in the hot path, which should bring a performance
improvement for the standard path.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
As announced in v20.08, this patch makes the vDPA
and related Vhost API stable.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
The temporary flag RTE_ETH_DEV_CLOSE_REMOVE is removed.
It was introduced in DPDK 18.11 in order to give time for PMDs to migrate.
The old behaviour was to free only queues when closing a port.
The new behaviour is calling rte_eth_dev_release_port() which does
three more tasks:
- trigger event callback
- reset state and few pointers
- free all generic port resources
The private port resources must be released in the .dev_close callback.
The .remove callback should:
- call .dev_close callback
- call rte_eth_dev_release_port()
- free multi-port device shared resources
Despite waiting two years, some drivers have not migrated,
so they may hit issues with the incompatible new behaviour.
After sending emails, adding logs, and announcing the deprecation,
the only last solution is to declare these drivers as unmaintained:
ionic, liquidio, nfp
Below is a summary of what to implement in those drivers.
* The freeing of private port resources must be moved
from the ".remove(device)" function to the ".dev_close(port)" function.
* If a generic resource (.mac_addrs or .hash_mac_addrs) cannot be freed,
it must be set to NULL in ".dev_close" function to protect from
subsequent rte_eth_dev_release_port() freeing.
* Note 1:
The generic resources are freed in rte_eth_dev_release_port(),
after ".dev_close" is called in rte_eth_dev_close(), but not when
calling ".dev_close" directly from the ".remove" PMD function.
That's why rte_eth_dev_release_port() must still be called explicitly
from ".remove(device)" after calling the ".dev_close" PMD function.
* Note 2:
If a device can have multiple ports, the common resources must be freed
only in the ".remove(device)" function.
* Note 3:
The port is supposed to be in a stopped state when it is closed.
If it is not the case, it is free to the PMD implementation
how to react when trying to close a non-stopped port:
either try to stop it automatically or just return an error.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Liron Himi <lironh@marvell.com>
Reviewed-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
The device operation .dev_close was returning void.
This driver interface is changed to return an int.
Note that the API rte_eth_dev_close() is still returning void,
although a deprecation notice is pending to change it as well.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Reviewed-by: Sachin Saxena <sachin.saxena@oss.nxp.com>
Reviewed-by: Liron Himi <lironh@marvell.com>
Reviewed-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
The pointers .device and .intr_handle were already reset by the helper
rte_eth_dev_pci_generic_remove().
It is now made part of rte_eth_dev_release_port().
It makes rte_eth_dev_pci_release() meaningless,
so it is replaced with a call to rte_eth_dev_release_port().
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
This patch defines various PCI config space access APIs
in order to read and find IOV specific PCI capabilities.
With these definitions implemented, it enables the base
driver to do SR-IOV specific initialization and HW specific
configuration required from PF-PMD driver instance.
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Add the exact match table type for the SWX pipeline. Used under the
hood by the SWX pipeline table instruction.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add the PCAP file-based source (input) and sink (output) port types
for the SWX pipeline. The sink port is typically used to implement the
packet drop pipeline action. Used under the hood by the pipeline rx
and tx instructions.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add the Ethernet device input/output port type for the SWX pipeline.
Used under the hood by the pipeline rx and tx instructions.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add support for building the SWX pipeline based on specification file
with syntax aligned to the P4 language. The specification file may be
generated by the P4C compiler in the future.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
High-level transaction-oriented API for SWX pipeline table updates. It
supports multi-table atomic updates, i.e. multiple tables can be
updated in a single step with only the before and after table set
visible to the packets. Uses the lower-level table update mechanisms.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Query API to be used by the control plane to detect the configuration
and state of the SWX pipeline and its internal objects.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Instruction optimizer. Detects frequent patterns and replaces them
with some more powerful vector-like pipeline instructions without any
user effort. Executes at instruction translation, not at run-time.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Instruction verifier. Executes at instruction translation time during
SWX pipeline build, i.e. at initialization instead of run-time.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The jump instructions are either unconditional (jmp) or conditional on
positive/negative tests such as header validity (jmpv/jmpnv), table
lookup hit/miss (jmph/jmpnh), executed action (jmpa/jmpna), equality
(jmpeq/jmpneq), comparison result (jmplt/jmpgt). The return
instruction resumes the pipeline execution after action subroutine.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The extern instruction calls one of the member functions of a given
extern object or it calls the given extern function. The function
arguments must be written in advance to the mailbox. The results
are available in the same place after execution.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The table instruction looks up the input key into the table and then
it triggers the execution of the action found in the table entry. On
lookup miss, the default table action is executed.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The shr (i.e. shift right) instruction source can be header field (H),
meta-data field (M), extern object (E) or function (F) mailbox field,
table entry action data field (T) or immediate value (I). The
destination is HMEF.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The shl (i.e. shift left) instruction source can be header field (H),
meta-data field (M), extern object (E) or function (F) mailbox field,
table entry action data field (T) or immediate value (I). The
destination is HMEF.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The xor (i.e. bitwise exclusive or) instruction source can be header
field (H), meta-data field (M), extern object (E) or function (F)
mailbox field, table entry action data field (T) or immediate value
(I). The destination is HMEF.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The or (i.e. bitwise or) instruction source can be header field (H),
meta-data field (M), extern object (E) or function (F) mailbox field,
table entry action data field (T) or immediate value (I). The
destination is HMEF.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The and (i.e. bitwise and) instruction source can be header field (H),
meta-data field (M), extern object (E) or function (F) mailbox field,
table entry action data field (T) or immediate value (I). The
destination is HMEF.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The cksub (i.e. checksum subtract) instruction is used to update the
1's complement sum commonly used by protocols such as IPv4, TCP or
UDP.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The ckadd (i.e. checksum add) instruction is used to either compute,
verify or update the 1's complement sum commonly used by protocols
such as IPv4, TCP or UDP.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The sub (i.e. subtract) instruction source can be header field (H),
meta-data field (M), extern object (E) or function (F) mailbox field,
table entry action data field (T) or immediate value (I). The
destination is HMEF.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The add instruction source can be header field (H), meta-data field
(M), extern object (E) or function (F) mailbox field, table entry
action data field (T) or immediate value (I). The destination is HMEF.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The DMA instruction handles the bulk read transfer of one header from
the table entry action data. Typically used to generate headers, i.e.
headers that are not extracted from the input packet.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The mov (i.e. move) instruction source can be header field (H),
meta-data field (M), extern object (E) or function (F) mailbox field,
table entry action data field (T) or immediate value (I). The
destination is HMEF.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add instructions to flag a header as valid or invalid. This flag can
be tested by the jmpv (jump if header valid) and jmpnv (jump if header
not valid) instructions.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add header emit and packet transmission instructions. Emit adds to the
output packet a header that is either generated (e.g. read from table
entry by action) or extracted from the input packet. Tx ends the
pipeline processing; discard is implemented by tx to special port.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add packet reception and header extraction instructions. The Rx must
be the first pipeline instruction. Each extracted header is logically
removed from the packet, then it can be read/written by instructions,
emitted into the outgoing packet or discarded.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The SWX pipeline instructions represent the main program that defines
the life of the packet. As packets go through tables that trigger
action subroutines, the headers and meta-data get transformed along
the way.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add tables to the SWX pipeline. The match fields are flexibly selected
from the headers and meta-data. The set of table actions is flexibly
selected for each table from the set of pipeline actions.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add SWX actions that are dynamically-defined through instructions as
opposed to pre-defined. The actions are subroutines of the pipeline
program that triggered by table lookup. The input arguments are the
action data from the table entry (format defined by struct), the
headers and meta-data are in/out.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add extern objects and functions to plug into the SWX pipeline any
functionality that cannot be efficiently implemented with existing
instructions, e.g. special checksum/ECC, crypto, meters, stats arrays,
heuristics, etc. In/out arguments are passed through mailbox with
format defined by struct.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add support for dynamically-defined packet headers and meta-data to
the SWX pipeline. The header and meta-data format are defined by the
struct type they instantiate.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add output ports to the newly introduced SWX pipeline type. Each port
instantiates a port type that defines the port operations, e.g. ethdev
port, PCAP port, etc. The TX interface is single packet, with packet
batching internally for performance.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add input ports to the newly introduced SWX pipeline type. Each port
instantiates a port type that defines the port operations, e.g. ethdev
port, PCAP port, etc. The RX interface is single packet, with packet
batching internally for performance.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add new improved Software Switch (SWX) pipeline type that supports
dynamically-defined packet headers, meta-data, actions and pipelines.
Actions and pipelines are defined through instructions.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch fixes an issue that uninitialized 'success'
is used to be compared with '0'.
Coverity issue: 337676
Fixes: 3340202f59 ("stack: add lock-free implementation")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Replace the store-release by relaxed for the CAS success at the end of
pop. Release isn't needed, because there is not write to data that need
to be synchronized.
The only preceding write is when the length is decreased, but the length
CAS loop already ensures the right synchronization.
The situation to avoid is when a thread sees the old length but the new
list, that doesn't have enough items for pop to success.
But the CAS success on length before the pop loop ensures any core reads
and updates the latest length, preventing this situation.
The store-release is also used to make sure that the items are read
before the head is updated, in order to prevent a core in pop to read an
incorrect value because another core rewrites it with push.
But this isn't needed, because items are read only when removed from the
used list. Right after this, they are pushed to the free list, and the
store-release in push makes sure the items are read before they are
visible in the free list.
Signed-off-by: Steven Lariau <steven.lariau@arm.com>
Reviewed-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Gage Eads <gage.eads@intel.com>
List head must be loaded right before continue (when failed to
find the new head).
Without this, one thread might keep trying and failing to pop items
without ever loading the new correct head.
Fixes: 7e6e609939 ("stack: add C11 atomic implementation")
Cc: gage.eads@intel.com
Cc: stable@dpdk.org
Signed-off-by: Steven Lariau <steven.lariau@arm.com>
Reviewed-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Gage Eads <gage.eads@intel.com>
The load-acquire of list->len on pop function is redundant.
Only the CAS success needs to be load-acquire.
It synchronizes with the store release in push, to ensure that the
updated head is visible when the new length is visible.
Without this, one thread in pop could see the increased length but the
old list, which doesn't have enough items yet for pop to succeed.
Signed-off-by: Steven Lariau <steven.lariau@arm.com>
Reviewed-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Gage Eads <gage.eads@intel.com>
An acquire fence is used to make sure loads after the fence can observe
all store operations before a specific store-release.
But push doesn't read any data, except for the head which is part of a
CAS operation (the items on the list are not read).
So there is no need for the acquire barrier.
Signed-off-by: Steven Lariau <steven.lariau@arm.com>
Reviewed-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Gage Eads <gage.eads@intel.com>
Fix cmpexchange usage of weak / strong.
The generated code is the same on x86 and ARM (there is no weak
cmpexchange), but the old usage was inconsistent.
For push and pop update size, weak is used because cmpexchange is inside
a loop.
For pop update root, strong is used even though cmpexchange is inside a
loop, because there may be a lot of operations to do in a loop iteration
(locate the new head).
Signed-off-by: Steven Lariau <steven.lariau@arm.com>
Reviewed-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Gage Eads <gage.eads@intel.com>
When generating the documentation, a new warning can be seen:
.../dpdk/lib/librte_ethdev/rte_ethdev.h:2441:
warning: argument 'link_speed' of command @param is not found in the
argument list of rte_eth_link_speed_to_str(uint32_t speed_link)
.../dpdk/lib/librte_ethdev/rte_ethdev.h:2455: warning: The following
parameters of rte_eth_link_speed_to_str(uint32_t speed_link) are not
documented: parameter 'speed_link'
Align the function prototype to its doxygen description.
Fixes: fbf931c9c3 ("ethdev: format link status text")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
This patch fixes the possible time-of-check to time-of-use (TOCTOU)
attack problem by copying request data and descriptor index to local
variable prior to process.
Also the original sequential read of descriptors may lead to TOCTOU
attack. This patch fixes the problem by loading all descriptors of a
request to local buffer before processing.
CVE-2020-14375
Fixes: 3bb595ecd6 ("vhost/crypto: add request handler")
Cc: stable@dpdk.org
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
This patch fixes the incorrect data length check to vhost crypto.
Instead of blindly accepting the descriptor length as data length, the
change compare the request provided data length and descriptor length
first. The security issue CVE-2020-14374 is not fixed alone by this
patch, part of the fix is done through:
"vhost/crypto: fix missed request check for copy mode".
CVE-2020-14374
Fixes: 3c79609fda ("vhost/crypto: handle virtually non-contiguous buffers")
Cc: stable@dpdk.org
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
This patch fixes vhost crypto library for the incorrect source and
destination buffer calculation in the copy mode.
Fixes: cd1e8f03ab ("vhost/crypto: fix packet copy in chaining mode")
Cc: stable@dpdk.org
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
This patch fixes the incorrect descriptor deduction for vhost crypto.
CVE-2020-14378
Fixes: 16d2e718b8 ("vhost/crypto: fix possible out of bound access")
Cc: stable@dpdk.org
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
This patch fixes the missing iv space allocation in crypto
operation mempool.
Fixes: 709521f4c2 ("examples/vhost_crypto: support multi-core")
Cc: stable@dpdk.org
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
Commit d0fcc38f5f ("vhost: improve device readiness notifications")
makes the assumption that every Virtio devices are considered
ready for preocessing as soon as first queue pair is configured
and enabled.
While this is true for Virtio-net, it isn't for Virtio-scsi
and Virtio-blk.
This patch fixes this by only making this assumption for
the builtin Virtio-net backend, and restores back to previous
behaviour for other backends.
Fixes: d0fcc38f5f ("vhost: improve device readiness notifications")
Reported-by: Changpeng Liu <changpeng.liu@intel.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Since rte_atomicXX APIs are not allowed to be used, use C11 atomic
builtins for link status update.
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Since rte_atomicXX APIs are not allowed to be used, use C11 atomic
builtins for power in use state update.
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: David Hunt <david.hunt@intel.com>
Since rte_atomicXX APIs are not allowed to be used, use C11 atomic builtins
for device processing counter.
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Nicolas Chautru <nicolas.chautru@intel.com>
Since rte_atomicXX APIs are not allowed to be used, use C11 builtins to
check if EAL is already initialized.
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Replace use of RTE_MACHINE_CPUFLAG macros with regular compiler
macros, which are more complete than those provided by DPDK, and as such
it allows new instruction sets to be leveraged without having to do
extra work to set them up in DPDK.
Signed-off-by: Sean Morrissey <sean.morrissey@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Since the 20.08 release deprecated rte_cio_*mb APIs because these APIs
provide the same functionality as rte_io_*mb APIs on all platforms, so
remove them and use rte_io_*mb instead.
Signed-off-by: Phil Yang <phil.yang@arm.com>
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Add a field named rx_buf_size in rte_eth_rxq_info to indicate the buffer
size used in receiving packets for HW.
In this way, upper-layer users can get this information by calling
rte_eth_rx_queue_info_get.
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Reviewed-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
There is new link_speed value introduced. It's INT_MAX value which
means that speed is unknown. To simplify processing of the value
in application, new function is added which convert link_speed to
string. Also dpdk examples have many duplicated code which format
entire link status structure to text.
This commit adds two functions:
* rte_eth_link_speed_to_str - format link_speed to string
* rte_eth_link_to_str - convert link status structure to string
Signed-off-by: Ivan Dyukov <i.dyukov@samsung.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Control thread (which handles iotlb msg) and forwarding thread
both use iotlb to translate address. The former may modify the
same entry of mempool and may cause a loop in iotlb_pending_entries
list.
Bugzilla ID: 523
Fixes: d012d1f293 ("vhost: add IOTLB helper functions")
Cc: stable@dpdk.org
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
vhost lib now does not have definition of reset status. This patch
adds the reset status definition and changes related log.
Signed-off-by: Chenbo Xia <chenbo.xia@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch reserves 2 bits as input selection to select inner and outer
encapsulation level for RSS computation. It is combined with existing
ETH_RSS_* to choose inner or outer layers.
This functionality already exists in rte_flow through level parameter in
RSS action configuration rte_flow_action_rss.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Enlarge the L3 and tunnel header length from 8-bit to 16-bit to handle
the bigger headers. And reorder the fields to avoid creating a structure
hole.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Fragment offset of IPv4 header is measured in units of
8 bytes. Fragment offset of UDP fragments will be wrong
after GSO if pyld_unit_size isn't multiple of 8. Say
pyld_unit_size is 1500, fragment offset of the second
UDP fragment will be 187 (i.e. 1500 / 8), which means 1496,
and it will result in 4-byte data loss (1500 - 1496 = 4).
So UDP GRO will reassemble out a wrong packet.
Fixes: b166d4f30b ("gso: support UDP/IPv4 fragmentation")
Cc: stable@dpdk.org
Signed-off-by: Yi Yang <yangyi01@inspur.com>
Acked-by: Jiayu Hu <jiayu.hu@intel.com>
SW VLAN insertion relies on Ethernet addresses location in contiguous
memory (do not split across mbuf segments). There is no any formal
requirements on data location and mbuf structure which guarantee it.
So, check it explicitly to avoid corrupted packets if the condition
is violated. Typically software VLAN insertion is done on Tx prepare
stage and application will get indication that the packet is invalid
and cannot be transmitted.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Some NIC hardware support shaper to work in packet mode i.e
shaping or ratelimiting traffic is in packets per second (PPS) as
opposed to default bytes per second (BPS). Hence this patch
adds support to configure shared or private shaper in packet mode,
provide rate in PPS and add related tm capabilities in port/level/node
capability structures.
This patch also updates tm port/level/node capability structures with
exiting features of scheduler wfq packet mode, scheduler wfq byte mode
and private/shared shaper byte mode.
SoftNIC PMD is also updated with new capabilities.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
'_rte_eth_dev_callback_process()' & '_rte_eth_dev_reset()' internal APIs
has unconventional underscore ('_') prefix.
Although this is not documented most probably this is to mark them as
internal. Since we have '__rte_internal' flag to mark this, removing '_'
from API names.
For '_rte_eth_dev_reset()', there is already a public API named
'rte_eth_dev_reset()', so renaming '_rte_eth_dev_reset()' to
'rte_eth_dev_internal_reset'.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
Hairpin helper functions were not used by drivers, but it was used only
local to ethdev. They are:
'rte_eth_dev_is_rx_hairpin_queue()'
'rte_eth_dev_is_tx_hairpin_queue()'
Exposing them as internal APIs and update mlx5 driver (only user of
hairpin) to use them.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Some ethdev functions are for drivers only, not for applications.
Since we have '__rte_internal' tag available now, marking internal
functions with it and moving functions to INTERNAL section in linker
script.
This is also good for documenting the internal functions.
Some internal APIs seems marked as experimental, but it doesn't make
sense to have internals APIs as experimental, updating their tag and
doxygen comments.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: David Marchand <david.marchand@redhat.com>
This patch is a preparation to hide the 'struct eth_dev_ops' from
applications by moving some device operations from 'struct eth_dev_ops'
to 'struct rte_eth_dev'.
Mentioned ethdev APIs are in the data path and implemented as inline
because of performance reasons.
Exposing 'struct eth_dev_ops' to applications is bad because it is a
contract between ethdev and PMDs, not really needs to be known by
applications, also changes in the struct causing ABI breakages which
shouldn't.
To be able to both keep APIs inline and hide the 'struct eth_dev_ops',
moving device operations used in ethdev inline APIs to 'struct
rte_eth_dev' to the same level with Rx/Tx burst functions.
The list of dev_ops moved:
eth_rx_queue_count_t rx_queue_count;
eth_rx_descriptor_done_t rx_descriptor_done;
eth_rx_descriptor_status_t rx_descriptor_status;
eth_tx_descriptor_status_t tx_descriptor_status;
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
Marking 'rte_eth_rx_descriptor_done()' API as deprecated.
``rte_eth_rx_descriptor_status`` and ``rte_eth_tx_descriptor_status``
APIs can be used as replacement.
Plan is to remove the API on 21.11 release.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
When querying the link information, the link status is
a mandatory major information.
Other boolean values are supposed to be accurate:
- duplex mode (half/full)
- negotiation (auto/fixed)
This API update is making explicit that the link speed information
is optional.
The value ETH_SPEED_NUM_NONE (0) was already part of the API.
The value ETH_SPEED_NUM_UNKNOWN (infinite) is added to cover
two different cases:
- speed is not known by the driver
- device is virtual
Suggested-by: Morten Brørup <mb@smartsharesystems.com>
Suggested-by: Benoit Ganne <bganne@cisco.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
* rte_is_broadcast_ether_addr():
Use binary logic instead of comparisons and boolean logic, thus reducing
the number of branches.
It now resembles rte_is_zero_ether_addr().
* rte_ether_addr_copy():
The source code modifications were discussed on the mailing list:
http://mails.dpdk.org/archives/dev/2020-June/171584.html
Remove obsolete ICC-specific code and related comment.
Restrict pointer aliasing (suggested by Jerin Jacob).
Remove superfluous "Fast" from function description headline; all DPDK
data plane functions are supposed to be fast.
Signed-off-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
This patch adds checking whether the related Tx or Rx queue has been
setup in the rte_eth_rx_queue_info_get and rte_eth_tx_queue_info_get
API function to avoid illegal address access.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This commit adds a new experimental API which allows the user
to retrieve the active state of an lcore. Knowing when the service
lcore is completed its polling loop can be useful to applications
to avoid race conditions when e.g. finalizing statistics.
The service thread itself now has a variable to indicate if its
thread is active. When zero the service thread has completed its
service, and has returned from the service_runner_func() function.
Suggested-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
This structure is not used in the public API.
Fixes: a753e53d51 ("eal: add device event monitor framework")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Now that the pci_map_resource API is private to the PCI bus, we can drop
the compatibility workaround we had implemented in 20.08.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
As reported during 20.08 work for Windows, the pci_map_resource API was
built with the assumption that its flags would be passed to mmap().
This introduced a regression when adding the rte_mem_map API as reported
in the workaround commit 9d2b245937 ("pci: keep API compatibility with
mmap values").
This API was only used in the PCI bus code, so move it there.
There is no code change happening during the move.
The only change is in the pci_map_resource description where the
additional flags are now documented as rte_mem_map API flags:
- * The additional flags for the mapping range.
+ * The additional rte_mem_map() flags for the mapping range.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
The rte_kernel_driver enum actually only pointed at PCI drivers and is
only used in the PCI subsystem.
Remove it from the generic device API and use a private enum in the PCI
code.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
This field was not generic as it was filled with PCI kernel drivers only.
It has no known in-tree user (and I could not find opensource projects
using it).
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Remove the deprecated buf_physaddr union field from rte_mbuf.
It is replaced with buf_iova which is at the same offset.
The single field buf_physaddr in rte_kni_mbuf is also renamed.
This concludes a 3-year process of semantic change.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Remove the deprecated functions
- rte_mbuf_data_dma_addr
- rte_mbuf_data_dma_addr_default
which aliased the more recent functions
- rte_mbuf_data_iova
- rte_mbuf_data_iova_default
Remove the deprecated macros
- rte_pktmbuf_mtophys
- rte_pktmbuf_mtophys_offset
which aliased the more recent macros
- rte_pktmbuf_iova
- rte_pktmbuf_iova_offset
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Remove the deprecated unioned fields physaddr and phys_addr
from the structures rte_mempool_objhdr and rte_mempool_memhdr.
They are replaced with the fields iova which are at the same offsets.
Remove the deprecated macro MEMPOOL_F_NO_PHYS_CONTIG
which is an alias of the more recent MEMPOOL_F_NO_IOVA_CONTIG.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Remove the deprecated unioned fields phys_addr
from the structures rte_memseg and rte_memzone.
They are replaced with the fields iova which are at the same offsets.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
trace_mem is declared as 'void *' which triggers following error:
'...invalid conversion from ‘void*’ to ‘__rte_trace_header*’
[-fpermissive]...'
Fix this by adding proper typecast to 'struct __rte_trace_header *'.
Fixes: ebaee64097 ("trace: simplify trace point headers")
Cc: stable@dpdk.org
Signed-off-by: Pawel Wodkowski <pawelwod@gmail.com>
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Nicolas Chautru <nicolas.chautru@intel.com>
The BPF lib was introduced in 18.05.
There were no changes in its public API since 19.11.
It should be mature enough to remove its 'experimental' tag.
RTE_BPF_XTYPE_NUM is also being dropped from rte_bpf_xtype to
avoid possible ABI problems in the future.
Signed-off-by: Conor Walsh <conor.walsh@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
As announced in earlier releases, rte_logs can now be made
internal to EAL.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Applications will need to use this API now to get internal
state of rte_log.
Suggested-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Marchand <david.marchand@redhat.com>
The debug message was poorly worded and did not include the
part that would be useful. I.e it never said what was being ignored.
Change it to print the message so that if udev changes format or
other subsystems need to be added then the necessary information
will be in the debug log.
Fixes: 0d0f478d04 ("eal/linux: add uevent parse and process")
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Jeff Guo <jia.guo@intel.com>
Remove the deprecated refcnt_atomic union fields in
rte_mbuf and rte_mbuf_ext_shared_info structures.
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Not all rawdevs will require a device start/stop function, so rather than
requiring such drivers to provide dummy functions, just set the
started/stopped rawdev flag from the rawdev layer and return success.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
The driver APIs for returning the queue default config can fail if the
parameters are invalid, or other reasons, so allow them to return error
codes to the rawdev layer and from hence to the app.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
The queue setup and queue defaults query functions take a void * parameter
as configuration data, preventing any compile-time checking of the
parameters and limiting runtime checks. Adding in the length of the
expected structure provides a measure of typechecking, and can also be used
for ABI compatibility in future, since ABI changes involving structs almost
always involve a change in size.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
Currently with the rawdev API there is no way to check that the structure
passed in via the dev_private pointer in the structure passed to configure
API is of the correct type - it's just checked that it is non-NULL. Adding
in the length of the expected structure provides a measure of typechecking,
and can also be used for ABI compatibility in future, since ABI changes
involving structs almost always involve a change in size.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
Since we now allow some parameter checking inside the driver info_get()
functions, it makes sense to allow error return from those functions to the
caller. Therefore we change the driver callback return type from void to
int.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
Currently with the rawdev API there is no way to check that the structure
passed in via the dev_private pointer in the dev_info structure is of the
correct type - it's just checked that it is non-NULL. Adding in the length
of the expected structure provides a measure of typechecking, and can also
be used for ABI compatibility in future, since ABI changes involving
structs almost always involve a change in size.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
Add ethdev and a missing dependency (meter) to the list
of libraries built on Windows.
Signed-off-by: Fady Bader <fady@mellanox.com>
Acked-by: Narcisa Vasile <navasile@linux.microsoft.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Ranjit Menon <ranjit.menon@intel.com>
Some ethdev structs were present in .map export list.
There structs are removed from the .map file.
Signed-off-by: Fady Bader <fady@mellanox.com>
Acked-by: Narcisa Vasile <navasile@linux.microsoft.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Ranjit Menon <ranjit.menon@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The .def file is a reduced copy of the .map file.
In order to ease comparison, some lines are moved in the .def file
to be in the same order as in the .map file.
rte_eal_get_configuration is removed because it has been removed
from the .map file in DPDK 19.11.
Note: it had been removed and re-added by mistake in 20.08 .def file.
Few functions are added in the .def file to allow ethdev on Windows.
Signed-off-by: Fady Bader <fady@mellanox.com>
Acked-by: Narcisa Vasile <navasile@linux.microsoft.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Ranjit Menon <ranjit.menon@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Interrupts are not implemented for Windows.
In order to compile ethdev on Windows,
an empty interrupt control function stub has to be added for Windows.
Signed-off-by: Fady Bader <fady@mellanox.com>
Acked-by: Narcisa Vasile <navasile@linux.microsoft.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Ranjit Menon <ranjit.menon@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
librte_net was not compiling under Windows.
To solve this, needed header files are added.
Signed-off-by: Fady Bader <fady@mellanox.com>
Acked-by: Ranjit Menon <ranjit.menon@intel.com>
Tested-by: Pallavi Kadam <pallavi.kadam@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
htons is not defined in Windows with the MinGW compiler.
htons is replaced with RTE_BE16 in order to compile under Windows.
Signed-off-by: Fady Bader <fady@mellanox.com>
Acked-by: Ranjit Menon <ranjit.menon@intel.com>
Tested-by: Pallavi Kadam <pallavi.kadam@intel.com>
In Windows, s_addr is defined in winsock2.h which is included by windows.h.
It is undefined in order to be defined as part of rte_ether_hdr.
Signed-off-by: Fady Bader <fady@mellanox.com>
Acked-by: Ranjit Menon <ranjit.menon@intel.com>
Tested-by: Pallavi Kadam <pallavi.kadam@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Add needed function calls in rte_eal_init to detect vdev PMD.
eal_option_device_parse()
rte_service_init()
rte_bus_probe()
Signed-off-by: Tal Shnaiderman <talshn@mellanox.com>
Acked-by: Narcisa Vasile <navasile@linux.microsoft.com>
Tested-by: Narcisa Vasile <navasile@linux.microsoft.com>
Tested-by: Pallavi Kadam <pallavi.kadam@intel.com>
current support will build vdev with empty MP functions
currently unsupported for Windows.
Signed-off-by: Tal Shnaiderman <talshn@mellanox.com>
Acked-by: Narcisa Vasile <navasile@linux.microsoft.com>
Tested-by: Narcisa Vasile <navasile@linux.microsoft.com>
Tested-by: Pallavi Kadam <pallavi.kadam@intel.com>
Make is not supported for compiling DPDK, the config files are no
longer needed.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
A decision was made [1] to no longer support Make in DPDK, this patch
removes all Makefiles that do not make use of pkg-config, along with
the mk directory previously used by make.
[1] https://mails.dpdk.org/archives/dev/2020-April/162839.html
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Start a new release cycle with empty release notes.
The ABI version becomes 21.0.
The ABI major is back to normal, having only one number (21 vs 20.0).
The map files are updated to the new ABI major number (21).
The ABI exceptions are dropped.
Travis ABI check is disabled because compatibility is not preserved.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
The comment used the term whitelist and was awkardly written.
Replace it with simpler direct description of adding a new address.
No code or API changes for this.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: John McNamara <john.mcnamara@intel.com>
In DPDK, the correct terms for process are primary/secondary.
This is bugfix, not a change in terms for new release.
Fixes: f2e7592c47 ("kni: fix multi-process support")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Some confusing comments were still present from old days,
when most drivers were from Intel.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Async copy fails when single ring buffer vector is split on multiple
physical pages. This happens because current hpa address translation
function doesn't handle multi-page buffers. A new gpa to hpa address
conversion function, which returns the hpa on the first hitting host
pages, is implemented in this patch. Async data path recursively calls
this new function to construct a multi-segments async copy descriptor
for ring buffers crossing physical page boundaries.
Fixes: cd6760da10 ("vhost: introduce async enqueue for split ring")
Signed-off-by: Patrick Fu <patrick.fu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
If rte_vhost_enable_guest_notification is called before
the virtqueue is ready, the configuration is lost.
This patch fixes this by saving the guest notification
enablement value requested by the application, and apply
it before the virtqueue is made ready to the application.
Fixes: 604052ae53 ("net/vhost: support queue update")
Reported-by: Yinan Wang <yinan.wang@intel.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Tested-by: Yinan Wang <yinan.wang@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
The ol_flags check lacks of flag for IPv6 which causes checksum
flag configuration error while IPv6/TCP TSO packet is sent.
This patch fixes the issue by adding PKT_TX_TCP_SEG flag.
The rte_net_intel_cksum_flags_prepare() function prepares the
pseudo header checksum in packet data when doing checksum or TSO
offload.
Fixes: 520059a41a ("net: check fragmented headers in non-debug as well")
Signed-off-by: Yuying Zhang <yuying.zhang@intel.com>
Tested-by: Xi Zhang <xix.zhang@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
The async copy device callbacks are used by async APIs to transfer data
and check completion status. Async APIs return the number of packets
successfully processed to the caller applications and no error
(negative) value is allowed for API return value. Thus, negative return
values from async device callbacks don't have meaningful usage, while
adding overhead in checking the return value validity. This patch change
the callback return values from "int" to "uint32_t" to get aligned with
async API definition.
Fixes: 78639d5456 ("vhost: introduce async enqueue registration API")
Signed-off-by: Patrick Fu <patrick.fu@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
There are several drivers which duplicate bit generation macro.
Introduce a generic bit macros so that such drivers avoid redefining
same in multiple drivers.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
The function rte_zmalloc_socket() could return NULL, the return
value need to be checked.
Fixes: 5915699153 ("hash: fix scaling by reducing contention")
Cc: stable@dpdk.org
Reported-by: Bin Huang <brian.huangbin@huawei.com>
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Yipeng Wang <yipeng1.wang@intel.com>
Anything coming from sysfs has a newline at the end. Cut it off before
comparing the strings.
Fixes: 20ab67608a ("power: add environment capability probing")
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
Tested-by: Lihong Ma <lihongx.ma@intel.com>
Reviewed-by: Bruce Richardson <bruce.richardson@intel.com>
If allocation is successful on the first attempt, typically
there is no problem since we allocated everything required and
we'll terminate the loop (if memory chunk is really sufficient
to populate required number of mempool elements).
If the first attempt fails, we try to allocate half
of mem_size and it succeed, we'll have one more iteration of
the for-loop to allocate memory for remaining elements and
should not try the next time with quarter of the mem_size.
It is wrong that max_alloc_size is divided by 2 in the
case of successful allocation as well, or invalid memory
can be allocated, and leads to population failure, then errno
other than ENOMEM may be returned.
Fixes: 3a3d0c75b4 ("mempool: fix slow allocation of large pools")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Signed-off-by: Zhike Wang <wangzhike@jd.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
This node classifies pkts based on packet type and
sends them to appropriate next node. This is node
helps in distribution of packets from ethdev_rx node
to different next node with a constant overhead for
all packet types.
Currently all except non fragmented IPV4 packets are marked
to be sent to "pkt_drop" node.
Performance difference on ARM64 Octeontx2 is -4.9% due to
addition of new node in the path.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
when trying to compile rte_mpls with pedantic enabled,
on old compilers like 4.8 it will complain about bit field definition.
error: type of bit-field 'bs' is a GCC extension [-Werror=pedantic]
error: type of bit-field 'tc' is a GCC extension [-Werror=pedantic]
error: type of bit-field 'tag_lsb' is a GCC extension [-Werror=pedantic]
This fixes the compilation error by adding extension to the header
definition.
Fixes: e480cf487a ("net: add MPLS header structure")
Cc: stable@dpdk.org
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
zmbufs should be set to NULL when getting freed to avoid double free on
the same buffer pointer
Fixes: b0a985d1f3 ("vhost: add dequeue zero copy")
Cc: stable@dpdk.org
Signed-off-by: Patrick Fu <patrick.fu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
In async enqueue copy, a packet could be split into multiple copy
segments. When polling the copy completion status, current async data
path assumes the async device callbacks are aware of the packet
boundary and return completed segments only if all segments belonging
to the same packet are done. Such assumption are not generic to common
async devices and may degrade the copy performance if async callbacks
have to implement it in software manner.
This patch adds tracking of the completed copy segments at vhost side.
If async copy device reports partial completion of a packets, only
vhost internal record is updated and vring status keeps unchanged
until remaining segments of the packet are also finished. The async
copy device is no longer necessary to care about the packet boundary.
Fixes: cd6760da10 ("vhost: introduce async enqueue for split ring")
Signed-off-by: Patrick Fu <patrick.fu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Vring should not be touched if vq is disabled. This patch adds the vq
status check in async enqueue polling to avoid accessing to a disabled
queue.
Fixes: cd6760da10 ("vhost: introduce async enqueue for split ring")
Signed-off-by: Patrick Fu <patrick.fu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch adds the check of dev pointer in vhost async enqueue
completion poll. If a NULL dev pointer detected, the poll function
returns immediately.
Coverity issue: 360839
Fixes: cd6760da10 ("vhost: introduce async enqueue for split ring")
Signed-off-by: Patrick Fu <patrick.fu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Pseudo-header checksum calculation requires contiguous headers.
There is no any formal requirements on data location and mbuf
structure which could be used by the application.
Since
commit dfc6b2fd8d ("mbuf: remove Intel offload checks from generic API")
fragmented headers checks are done inside
rte_net_intel_cksum_flags_prepare() in RTE_LIBRTE_ETHDEV_DEBUG build
because it is moved from rte_validate_tx_offload() which is called
under debug only.
Make corresponding check to be done in non-debug build as well
to avoid bad accesses, incorrect checksum calculation and to
return appropriate error from Tx prepare.
Make no-offloads check more precise and do it in non-debug build
as well to avoid contiguous headers check and Tx prepare failure
if it is not actually required.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Coverity complains about unchecked return value of rte_rcu_qsbr_dq_enqueue.
By default, defer queue size is big enough to hold all tbl8 groups. When
enqueue fails, return error to the user to indicate system issue.
Coverity issue: 360832
Fixes: 8a9f8564e9 ("lpm: implement RCU rule reclamation")
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Use C11 atomic builtins with explicit ordering instead of rte_atomic
ops which enforce unnecessary barriers on aarch64.
Suggested-by: Olivier Matz <olivier.matz@6wind.com>
Suggested-by: Dodji Seketeli <dodji@redhat.com>
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
This patch limits the number of client connections to the new telemetry
socket. The limit is set to 10.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Provide a wrapper for __atomic_thread_fence builtins to support
optimized code for __ATOMIC_SEQ_CST memory order for x86 platforms.
Suggested-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
If Jansson was found, the headers list is overwritten when including
rte_metrics_telemetry.h, which prevents rte_metrics.h from being
installed. This is now fixed to add to headers, rather than overwrite,
to allow both headers be installed when Jansson is present.
Fixes: c5b7197f66 ("telemetry: move some functions to metrics library")
Cc: stable@dpdk.org
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Change the log level for RTE_TEST_ASSERT macro to error to help
log errors while running test cases.
Suggested-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Acked-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
'librte_rcu' is now dependency to 'librte_lpm' library, this dependency
should be reflected to build system.
Fixes: 8a9f8564e9 ("lpm: implement RCU rule reclamation")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Add a new item "rte_flow_item_ecpri" in order to match eCRPI header.
eCPRI is a packet based protocol used in the fronthaul interface of
5G networks. Header format definition could be found in the
specification via the link below:
https://www.gigalight.com/downloads/standards/ecpri-specification.pdf
eCPRI message can be over Ethernet layer (.1Q supported also) or over
UDP layer. Message header formats are the same in these two variants.
Signed-off-by: Bing Zhao <bingz@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
There is the requirement on some networks for precise traffic timing
management. The ability to send (and, generally speaking, receive)
the packets at the very precisely specified moment of time provides
the opportunity to support the connections with Time Division
Multiplexing using the contemporary general purpose NIC without involving
an auxiliary hardware. For example, the supporting of O-RAN Fronthaul
interface is one of the promising features for potentially usage of the
precise time management for the egress packets.
The main objective of this patchset is to specify the way how applications
can provide the moment of time at what the packet transmission must be
started and to describe in preliminary the supporting this feature
from mlx5 PMD side [1].
The new dynamic timestamp field is proposed, it provides some timing
information, the units and time references (initial phase) are not
explicitly defined but are maintained always the same for a given port.
Some devices allow to query rte_eth_read_clock() that will return
the current device timestamp. The dynamic timestamp flag tells whether
the field contains actual timestamp value. For the packets being sent
this value can be used by PMD to schedule packet sending.
The device clock is opaque entity, the units and frequency are
vendor specific and might depend on hardware capabilities and
configurations. If might (or not) be synchronized with real time
via PTP, might (or not) be synchronous with CPU clock (for example
if NIC and CPU share the same clock source there might be no
any drift between the NIC and CPU clocks), etc.
After PKT_RX_TIMESTAMP flag and fixed timestamp field supposed
deprecation and obsoleting, these dynamic flag and field might be
used to manage the timestamps on receiving datapath as well. Having
the dedicated flags for Rx/Tx timestamps allows applications not
to perform explicit flags reset on forwarding and not to promote
received timestamps to the transmitting datapath by default.
The static PKT_RX_TIMESTAMP is considered as candidate to become
the dynamic flag and this move should be discussed.
When PMD sees the "rte_dynfield_timestamp" set on the packet being sent
it tries to synchronize the time of packet appearing on the wire with
the specified packet timestamp. If the specified one is in the past it
should be ignored, if one is in the distant future it should be capped
with some reasonable value (in range of seconds). These specific cases
("too late" and "distant future") can be optionally reported via
device xstats to assist applications to detect the time-related
problems.
There is no any packet reordering according timestamps is supposed,
neither within packet burst, nor between packets, it is an entirely
application responsibility to generate packets and its timestamps
in desired order. The timestamps can be put only in the first packet
in the burst providing the entire burst scheduling.
PMD reports the ability to synchronize packet sending on timestamp
with new offload flag:
This is palliative and might be replaced with new eth_dev API
about reporting/managing the supported dynamic flags and its related
features. This API would break ABI compatibility and can't be introduced
at the moment, so is postponed to 20.11.
For testing purposes it is proposed to update testpmd "txonly"
forwarding mode routine. With this update testpmd application generates
the packets and sets the dynamic timestamps according to specified time
pattern if it sees the "rte_dynfield_timestamp" is registered.
The new testpmd command is proposed to configure sending pattern:
set tx_times <burst_gap>,<intra_gap>
<intra_gap> - the delay between the packets within the burst
specified in the device clock units. The number
of packets in the burst is defined by txburst parameter
<burst_gap> - the delay between the bursts in the device clock units
As the result the bursts of packet will be transmitted with specific
delays between the packets within the burst and specific delay between
the bursts. The rte_eth_read_clock is supposed to be engaged to get the
current device clock value and provide the reference for the timestamps.
[1] http://patches.dpdk.org/patch/73714/
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add named constants for deprecated QinQ TPIDs.
Update drivers which have already been using existing
TPID named constants from librte_net to use the
new named constants rather than magic numbers.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Currently, there is a potential problem that calling the API function
rte_eth_dev_set_vlan_offload to start VLAN hardware offloads which the
driver does not support. If the PMD driver does not support certain VLAN
hardware offloads and does not check for it, the hardware setting will
not change, but the VLAN offloads in dev->data->dev_conf.rxmode.offloads
will be turned on.
It is supposed to check the hardware capabilities to decide whether the
relative callback needs to be called just like the behavior in the API
function named rte_eth_dev_configure. And it is also needed to cleanup
duplicated checks which are done in some PMDs. Also, note that it is
behaviour change for some PMDs which simply ignore (with error/warning
log message) unsupported VLAN offloads, but now it will fail.
Fixes: a4996bd89c ("ethdev: new Rx/Tx offloads API")
Fixes: 0ebce6129b ("net/dpaa2: support new ethdev offload APIs")
Fixes: f9416bbafd ("net/enic: remove VLAN filter handler")
Fixes: 4f7d9e383e ("fm10k: update vlan offload features")
Fixes: fdba3bf15c ("net/hinic: add VLAN filter and offload")
Fixes: b96fb2f0d2 ("net/i40e: handle QinQ strip")
Fixes: d4a27a3b09 ("nfp: add basic features")
Fixes: 56139e85ab ("net/octeontx: support VLAN filter offload")
Fixes: ba1b3b081e ("net/octeontx2: support VLAN offloads")
Fixes: d87246a437 ("net/qede: enable and disable VLAN filtering")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
Acked-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
Acked-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
In the rte_eth_rx_queue_setup API function, the local variable named
mbp_buf_size, which is the data room size of the input parameter mp,
is checked to guarantee that each memory chunk used for net device
in the mbuf is bigger than the min_rx_bufsize. But if mbp_buf_size is
less than RTE_PKTMBUF_HEADROOM, the value of the following statement
will be a large number since the mbp_buf_size is a unsigned value.
mbp_buf_size - RTE_PKTMBUF_HEADROOM
As a result, it will cause a segment fault in this situation.
This patch fixes it by modify the check condition to guarantee that the
local variable named mbp_buf_size is bigger than RTE_PKTMBUF_HEADROOM.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Function 'rte_eth_dma_zone_reserve()' returns an existing memzone based
on name match, but other requested attributes are discarded.
This may cause driver using a memzone with wrong size or alignment.
Verify size, alignment and socket_id for matched memzone, and do not use
memzone if any one of the attributes are not justified.
It is possible to free the existing memzone and allocate again with the
requested attributes but it is better caller do the explicit free.
Reported-by: Renata Saiakhova <renata.saiakhova@ekinops.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
This patch adds support to the new Virtio device get status
Vhost-user message.
The driver can send this new message to read the device status.
One of the uses of this message is to ensure the feature negotiation has
succeeded. According to the virtio spec, after completing the feature
negotiation, the driver sets the FEATURE_OK status bit and re-reads it
to ensure the device has accepted the features.
This patch also clears the FEATURE_OK status bit if the feature
negotiation has failed to let the driver know about his failure.
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
This patch adds support to the new Virtio device status
Vhost-user protocol feature.
Getting such information in the backend helps to know
when the driver is done with the device configuration
and so makes the initialization phase more robust.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
This patch checks whether vDPA device configuration
succeed and does not set the CONFIGURED flag if it
didn't.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Some of the vDPA callbacks have to be implemented
for vDPA to work properly.
This patch marks them as mandatory in the API doc and
simplify code calling these ops with removing
unnecessary checks that are now done at registration
time.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
This patch is a small refactoring, as preliminary work
for adding support to Virtio status support.
No functional change here.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Before checking whether the device is ready is done
a check on whether the RUNNING flag is set. Then the
READY flag is set if virtio_is_ready() returns true.
While it seems to not cause any issue, it makes more
sense to check whether the READY flag is set and not
the RUNNING one.
Fixes: c0674b1bc8 ("vhost: move the device ready check at proper place")
Cc: stable@dpdk.org
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
pthread_setname_np refuses names larger than 16 bytes (\0 included).
Rather than return an error, truncate the name to this limit in the
rte_thread_setname helper.
Caught with ixgbe which creates control thread with name
"ixgbe-link-handler":
Configuring Port 0 (socket 0)
EAL: Cannot set name for ctrl thread
...
EAL: Cannot set name for ctrl thread
Port 0: link state change event
...
EAL: Cannot set name for ctrl thread
Port 0: link state change event
Note: before this change, the thread would keep its original name, which
meant in my test for the ixgbe handler either "dpdk-testpmd" or
"eal-intr-thread".
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
There is no need to return the defer queue handle in rte_lpm_rcu_qsbr_add,
since enough flexibility has been provided to configure the defer queue.
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Currently, there is no way to know if the power management env is
supported without trying to initialize it. The init API also does
not distinguish between failure due to some error and failure due to
power management not being available on the platform in the first
place.
Thus, add an API that provides capability of probing support for a
specific power management API.
Suggested-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
The function pci_map_resource() returns MAP_FAILED in case of error.
When replacing the call to mmap() by rte_mem_map(),
the error code became NULL, breaking the API.
This function is probably not used outside of DPDK,
but it is still a problem for two reasons:
- the deprecation process was not followed
- the Linux function pci_vfio_mmap_bar() is broken for i40e
The error code is reverted to the Unix value MAP_FAILED.
Windows needs to define this special value (-1 as in Unix).
After proper deprecation process, the API could be changed again
if really needed.
Because of the switch from mmap() to rte_mem_map(),
another part of the API was changed: "int additional_flags"
are defined as "additional flags for the mapping range"
without mentioning it was directly used in mmap().
Currently it is directly used in rte_mem_map(),
that's why the values rte_map_flags must be mapped (sic) on the mmap ones
in case of Unix OS.
These are side effects of a badly defined API using Unix values.
Bugzilla ID: 503
Fixes: 2fd3567e54 ("pci: use OS generic memory mapping functions")
Reported-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Tested-by: Lihong Ma <lihongx.ma@intel.com>
Found an issue while using RTE_ALIGN_MUL_NEAR with an
expression, like as passed in estimate_tsc_freq().
RTE_ALIGN_MUL_FLOOR resulted in unexpected value as
parathesis are required to evaluate an expression.
Fixes: 5120203d75 ("eal: add macros to align value to multiple")
Cc: stable@dpdk.org
Signed-off-by: Harman Kalra <hkalra@marvell.com>
AdjustTokenPrivileges() succeeds even if no requested privileges have
been granted; this behavior is documented. Check last error code in
addition to return value to detect such case.
Make error messages more specific and add troubleshooting hint.
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Ranjit Menon <ranjit.menon@intel.com>
With current code, the checksum of odd-length buffers is wrong on
big endian CPUs: the last byte is not properly summed to the
accumulator.
Fix this by left-shifting the remaining byte by 8. For instance,
if the last byte is 0x42, we should add 0x4200 to the accumulator
on big endian CPUs.
This change is similar to what is suggested in Errata 3133 of
RFC 1071.
Fixes: 6006818cfb26("net: new checksum functions")
Cc: stable@dpdk.org
Signed-off-by: Hongzhi Guo <guohongzhi1@huawei.com>
Reviewed-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Per RFC768:
If the computed checksum is zero, it is transmitted as all ones.
An all zero transmitted checksum value means that the transmitter
generated no checksum.
RFC793 for TCP has no such special treatment for the checksum of zero.
Fixes: 6006818cfb ("net: new checksum functions")
Cc: stable@dpdk.org
Signed-off-by: Hongzhi Guo <guohongzhi1@huawei.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Restrict pointer aliasing to allow the compiler to vectorize loop
more aggressively.
With this patch, a 9.6% improvement is observed in throughput for
the packed virtio-net PVP case, and a 2.8% improvement in throughput
for the packed virtio-user PVP case. All performance data are measured
on ThunderX-2 platform under 0.001% acceptable packet loss with 1 core
on both vhost and virtio side.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Acked-by: Adrián Moreno <amorenoz@redhat.com>
The 'restrict' keyword is recognized in C99, while type qualifier
'__restrict' compiles ok in C with all language levels. This patch
is to replace the existing 'restrict' with '__rte_restrict' which
is a common wrapper supported by all compilers.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Currently, the tbl8 group is freed even though the readers might be
using the tbl8 group entries. The freed tbl8 group can be reallocated
quickly. This results in incorrect lookup results.
RCU QSBR process is integrated for safe tbl8 group reclaim.
Refer to RCU documentation to understand various aspects of
integrating RCU library into other libraries.
To avoid ABI breakage, a struct __rte_lpm is created for lpm library
internal use. This struct wraps rte_lpm that has been exposed and
also includes members that don't need to be exposed such as RCU related
config.
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
The event status is defined as a volatile variable and shared between
threads. Use C11 atomic built-ins with explicit ordering instead of
rte_atomic ops which enforce unnecessary barriers on aarch64.
The event status has been cleaned up by the compare-and-swap operation
when we free the event data, so there is no need to set it to invalid
after that.
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Harman Kalra <hkalra@marvell.com>
Use rte_ring_xxx_elem_xxx APIs to replace legacy API implementation.
This reduces code duplication and improves code maintenance.
Tests done on Arm, x86 [1] and PPC [2] do not indicate performance
degradation.
[1] https://mails.dpdk.org/archives/dev/2020-July/173780.html
[2] https://mails.dpdk.org/archives/dev/2020-July/173863.html
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: David Christensen <drc@linux.vnet.ibm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Remove the experimental tag for rte_ring_xxx_elem APIs that have been
around for 2 releases.
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Remove the experimental tag for rte_ring_reset API that have been around
for 4 releases.
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
"extern C" define is added to rte_service_component.h file
to be able to use in C++ context
Fixes: 21698354c8 ("service: introduce service cores concept")
Cc: stable@dpdk.org
Signed-off-by: Levend Sayar <levendsayar@gmail.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Some log macros was using 'EAL' logtype, convert them to 'ethdev'.
Also fix missing EOL and fix syntax for some logs.
Fixes: 214ed1acd1 ("ethdev: add iterator to match devargs input")
Fixes: e489007a41 ("ethdev: add generic create/destroy ethdev APIs")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
This patch implements async enqueue data path for split ring. 2 new
async data path APIs are defined, by which applications can submit
and poll packets to/from async engines. The async engine is either
a physical DMA device or it could also be a software emulated backend.
The async enqueue data path leverages callback functions registered by
applications to work with the async engine.
Signed-off-by: Patrick Fu <patrick.fu@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Performing large memory copies usually takes up a major part of CPU
cycles and becomes the hot spot in vhost-user enqueue operation. To
offload the large copies from CPU to the DMA devices, asynchronous
APIs are introduced, with which the CPU just submits copy jobs to
the DMA but without waiting for its copy completion. Thus, there is
no CPU intervention during data transfer. We can save precious CPU
cycles and improve the overall throughput for vhost-user based
applications. This patch introduces registration/un-registration
APIs for vhost async data enqueue operation. Together with the
registration APIs implementations, data structures and the prototype
of the async callback functions required for async enqueue data path
are also defined.
Signed-off-by: Patrick Fu <patrick.fu@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
This patch defines new RSS offload types for PPPoE. Typically,
session id would be the RSS input set for a PPPoE packet, but
as a hint, each driver may have different default behaviors.
Signed-off-by: Simei Su <simei.su@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The rte_service_lcore_reset_all function stops execution of services
on all lcores and switches them back from ROLE_SERVICE to ROLE_RTE.
However the thread loop for slave lcores (eal_thread_loop) distincts these
roles to set lcore state after processing delegated function.
It sets WAIT state for ROLE_SERVICE, but FINISHED for ROLE_RTE.
So changing the role to RTE before stopping work in slave lcores
causes lcores to end in FINISHED state. That is why the rte_eal_lcore_wait
must be run after rte_service_lcore_reset_all to bring back lcores to
launchable (WAIT) state.
This has been fixed in test app and clarified in API documentation.
Setting the state to WAIT in rte_service_runner_func is premature
as the rte_service_runner_func function is still a part of the lcore
function delegated to slave lcore. The state is overwritten anyway in
slave lcore thread loop. This premature setting state to WAIT might
however cause rte_eal_lcore_wait, that was called by the application,
to return before slave lcore thread set the FINISHED state. That's
why it is removed from librte_eal rte_service_runner_func function.
Bugzilla ID: 464
Fixes: 21698354c8 ("service: introduce service cores concept")
Fixes: f038a81e1c ("service: add unit tests")
Cc: stable@dpdk.org
Reported-by: Sarosh Arif <sarosh.arif@emumba.com>
Signed-off-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
The impl_opaque field is shared between the timer arm and cancel
operations. Meanwhile, the state flag acts as a guard variable to
make sure the update of impl_opaque is synchronized. The original
code uses rte_smp barriers to achieve that. This patch uses C11
atomics with an explicit one-way memory barrier instead of full
barriers rte_smp_w/rmb() to avoid the unnecessary barrier on aarch64.
Since compilers can generate the same instructions for volatile and
non-volatile variable in C11 __atomics built-ins, so remain the volatile
keyword in front of state enum to avoid the ABI break issue.
Cc: stable@dpdk.org
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
There is no thread will access these impl_opaque data after timer
canceled. When new timer armed, it got refilled. So the cleanup
process is unnecessary.
Cc: stable@dpdk.org
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
The in_use flag is a per core variable which is not shared between
lcores in the normal case and the access of this variable should be
ordered on the same core. However, if non-EAL thread pick the highest
lcore to insert timers into, there is the possibility of conflicts
on this flag between threads. Then the atomic compare-and-swap
operation is needed.
Use the C11 atomics instead of the generic rte_atomic operations to
avoid the unnecessary barrier on aarch64.
Cc: stable@dpdk.org
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
The n_poll_lcores counter and poll_lcore array are shared between lcores
and the update of these variables are out of the protection of spinlock
on each lcore timer list. The read-modify-write operations of the counter
are not atomic, so it has the potential of race condition between lcores.
Use c11 atomics with RELAXED ordering to prevent confliction.
Fixes: cc7b73ea9e ("eventdev: add new software timer adapter")
Cc: stable@dpdk.org
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
This patch adds traces to some Cryptodev functions that are used
in primary/secondary context.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch adds function that can check if queue pair
was already setup. This may be useful when dealing with
multi process approach in cryptodev.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add a note to the rte_crypto_sym_op->auth.data fields to state that
for DOCSIS security protocol, these are used to specify the offset and
length of data over which the CRC is calculated.
Signed-off-by: David Coyle <david.coyle@intel.com>
Signed-off-by: Mairtin o Loingsigh <mairtin.oloingsigh@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Add support for DOCSIS protocol to rte_security library. This support
currently comprises the combination of Crypto and CRC operations.
Signed-off-by: David Coyle <david.coyle@intel.com>
Signed-off-by: Mairtin o Loingsigh <mairtin.oloingsigh@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch adds the verification of the element size of the
mempool provided for the session creation. Returns the error
if the element size is too small to hold the session object.
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The multiprocess feature has been implicitly enabled so far.
Applications might want to explicitly disable like when using the
non-EAL threads registration API.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add a helper to iterate all lcores.
The iterator callback is read-only wrt the lcores list.
Implement a dump function on top of this for debugging.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
DPDK components and applications can have their say when a new lcore is
initialized. For this, they can register a callback for initializing and
releasing their private data.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
DPDK allows calling some part of its API from a non-EAL thread but this
has some limitations.
OVS (and other applications) has its own thread management but still
want to avoid such limitations by hacking RTE_PER_LCORE(_lcore_id) and
faking EAL threads potentially unknown of some DPDK component.
Introduce a new API to register non-EAL thread and associate them to a
free lcore with a new NON_EAL role.
This role denotes lcores that do not run DPDK mainloop and as such
prevents use of rte_eal_wait_lcore() and consorts.
Multiprocess is not supported as the need for cohabitation with this new
feature is unclear at the moment.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
For consistency sake, move all lcore role code in the dedicated
compilation unit / header.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This is a preparation step for dynamically unregistering threads.
Since we explicitly allocate a per thread trace buffer in
__rte_thread_init, add an internal helper to free this buffer.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Introduce a helper responsible for initialising the per thread context.
We can then have a unified context for EAL and non-EAL threads and
remove copy/paste'd OS-specific helpers.
Per EAL thread CPU affinity setting is separated from the thread init.
It is to accommodate with Windows EAL where CPU affinity is not set at
the moment.
Besides, having affinity set by the master lcore in FreeBSD and Linux
will make it possible to detect errors rather than panic in the child
thread. But the cleanup when such an event happens is left for later.
A side-effect of this patch is that control threads can now use
recursive locks (rte_gettid() was not called before).
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Because of the inline accessor + static declaration in rte_gettid(),
we end up with multiple symbols for RTE_PER_LCORE(_thread_id).
Each compilation unit will pay a cost when accessing this information
for the first time.
$ nm build/app/dpdk-testpmd | grep per_lcore__thread_id
0000000000000054 d per_lcore__thread_id.5037
0000000000000040 d per_lcore__thread_id.5103
0000000000000048 d per_lcore__thread_id.5259
000000000000004c d per_lcore__thread_id.5259
0000000000000044 d per_lcore__thread_id.5933
0000000000000058 d per_lcore__thread_id.6261
0000000000000050 d per_lcore__thread_id.7378
000000000000005c d per_lcore__thread_id.7496
000000000000000c d per_lcore__thread_id.8016
0000000000000010 d per_lcore__thread_id.8431
Make it global as part of the DPDK_21 stable ABI.
Fixes: ef76436c68 ("eal: get unique thread id")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
We have per lcore thread symbols scattered in OS implementations but
common code relies on them.
Move all of them in common.
RTE_PER_LCORE(_socket_id) and RTE_PER_LCORE(_cpuset) have public
accessors and are not exported through the library map, they can be
made static.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Change the barrier APIs for IO to reflect that Armv8-a is other-multi-copy
atomicity memory model.
Armv8-a memory model has been strengthened to require
other-multi-copy atomicity. This property requires memory accesses
from an observer to become visible to all other observers
simultaneously [3]. This means
a) A write arriving at an endpoint shared between multiple CPUs is
visible to all CPUs
b) A write that is visible to all CPUs is also visible to all other
observers in the shareability domain
This allows for using cheaper DMB instructions in the place of DSB
for devices that are visible to all CPUs (i.e. devices that DPDK
caters to).
Please refer to [1], [2] and [3] for more information.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=22ec71615d824f4f11d38d0e55a88d8956b7e45f
[2] https://www.youtube.com/watch?v=i6DayghhA8Q
[3] https://www.cl.cam.ac.uk/~pes20/armv8-mca/
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Tested-by: Ruifeng Wang <ruifeng.wang@arm.com>
The service core list is populated, but not used. Incorrect
lcore states are examined for a service.
Use the populated list to iterate over service cores.
Fixes: e484ccddbe ("service: avoid false sharing on core state")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
All include files should be safe from C++
Fixes: 5a5793a5ff ("rib: add RIB library")
Fixes: f7e861e21c ("rib: support IPv6")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Max_nodes in config is signed, but a negative value makes
no sense. Get rid of extra BSD style parens.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
The getter functions should take a constant pointer
to make it clear that node is not modified.
The rib create functions do not modify their config structure.
Mark the config as constant so that programs can pass
simple constant data.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
The rte_rawdev_dump function was missing from the map file,
meaning it was unavailable for use when linking dynamically.
Fixes: c88b3f2558 ("rawdev: introduce raw device library")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The rawdev info struct has a socket_id field which was not filled in.
We can also omit the checks for the parameter struct being null, since
that is previously checked in the function.
Fixes: c88b3f2558 ("rawdev: introduce raw device library")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
To call the rte_rawdev_info_get() function, the user currently has to know
the underlying type of the device in order to pass an appropriate structure
or buffer as the dev_private pointer in the info structure. By allowing a
NULL value for this field, we can skip getting the device-specific info and
just return the generic info - including the device name and driver, which
can be used to determine the device type - to the user.
This ensures that basic info can be get for all rawdevs, without knowing
the type, and even if the info driver API call has not been implemented for
the device.
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The Linux kernel module vfio-pci introduces the VF token to enable
SR-IOV support since 5.7.
The VF token can be set by a vfio-pci based PF driver and must be known
by the vfio-pci based VF driver in order to gain access to the device.
Since the vfio-pci module uses the VF token as internal data to provide
the collaboration between SR-IOV PF and VFs, so DPDK can use the same
VF token for all PF devices by specifying the related EAL option.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Tested-by: Harman Kalra <hkalra@marvell.com>
Add the dependent header files explicitly, so that the user just needs
to include the 'rte_uuid.h' header file directly to avoid compile error:
(1). rte_uuid.h:97:55: error: unknown type name ‘size_t’
(2). rte_uuid.h:58:2: error: implicit declaration of function ‘memcpy’
Fixes: 6bc67c497a ("eal: add uuid API")
Cc: stable@dpdk.org
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
The startup of VFIO is too noisy. Logging is expensive on some
systems, and distracting to the user.
It should not be logging at NOTICE level, reduce it to INFO level.
It really should be DEBUG here but that would hide it by default.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
The 'group_status' has never been used and can be removed.
Fixes: 94c0776b1b ("vfio: support hotplug")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
If rte_lcore_index() is asked to give the index of the
current lcore (argument -1) and is called from a non-EAL thread
then it would invalid result. The result would come
lcore_config[-1].core_index which is some other data in the
per-thread area.
The resolution is to return -1 which is what rte_lcore_index()
returns if handed an invalid lcore.
Same issue existed with rte_lcore_to_cpu_id().
Bugzilla ID: 446
Fixes: 26cc3bbe4d ("eal: add lcore accessors")
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: David Marchand <david.marchand@redhat.com>
Change the inline functions to use __rte_always_inline to be
consistent with rest of the inline functions.
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
get_tsc_freq uses 'nanosleep' system call to calculate the CPU
frequency. However, 'nanosleep' results in the process getting
un-scheduled. The kernel saves and restores the PMU state. This
ensures that the PMU cycles are not counted towards a sleeping
process. When RTE_ARM_EAL_RDTSC_USE_PMU is defined, this results
in incorrect CPU frequency calculation. This logic is replaced
with generic counter based loop.
Bugzilla ID: 450
Fixes: f91bcbb2d9 ("eal/armv8: use high-resolution cycle counter")
Cc: stable@dpdk.org
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
The experimental tags were removed, but the comment
is still having API classification as EXPERIMENTAL
Fixes: 931cc531aa ("rawdev: remove experimental tag")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
The following libraries are experimental, all of their functions can
be changed or removed:
- librte_bbdev
- librte_bpf
- librte_compressdev
- librte_fib
- librte_flow_classify
- librte_graph
- librte_ipsec
- librte_node
- librte_rcu
- librte_rib
- librte_stack
- librte_telemetry
Their status is properly announced in MAINTAINERS.
Remind this status in their headers in a common fashion (aligned to ABI
docs).
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Having a special versioning for experimental/internal libraries put a
additional maintenance cost while this status is already announced in
MAINTAINERS and the library headers/documentation.
Following discussions and vote at 05/20 TB meeting [1], use a single
versioning for all libraries in DPDK.
Note: for the ABI check, an exception [2] had been added when tweaking
this special versioning [3].
Prefer explicit libabigail rules (which will be dropped in 20.11).
1: https://mails.dpdk.org/archives/dev/2020-May/168450.html
2: https://git.dpdk.org/dpdk/commit/?id=23d7ad5db41c
3: https://git.dpdk.org/dpdk/commit/?id=ec2b8cd7ed69
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Inclusion of the endian.h header is set only for Linux OS.
Windows endianness will be determined by the predefined
__BYTE_ORDER__ macro.
Signed-off-by: Tal Shnaiderman <talshn@mellanox.com>
Some EAL functions are used by mempool lib but not exported on Windows.
The functions are exported.
Added mempool to supported libraries for Windows compilation.
Signed-off-by: Fady Bader <fady@mellanox.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Function versioning implementation is not supported by Windows.
Function versioning is disabled on Windows.
Signed-off-by: Fady Bader <fady@mellanox.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The QoS scheduler works off port time that is computed from the number
of CPU cycles that have elapsed since the last time the port was
polled. It divides the number of elapsed cycles to calculate how
many bytes can be sent, however this division can generate rounding
errors, where some fraction of a byte sent may be lost.
Lose enough of these fractional bytes and the QoS scheduler
underperforms. The problem is worse with low bandwidths.
To compensate for this rounding error this fix doesn't advance the
port's time_cpu_cycles by the number of cycles that have elapsed,
but by multiplying the computed number of bytes that can be sent
(which has been rounded down) by number of cycles per byte.
This will mean that port's time_cpu_cycles will lag behind the CPU
cycles momentarily. At the next poll, the lag will be taken into
account.
Fixes: de3cfa2c98 ("sched: initial import")
Cc: stable@dpdk.org
Signed-off-by: Alan Dewar <alan.dewar@att.com>
Acked-by: Jasvinder Singh <jasvinder.singh@intel.com>
This commit introduce the API that is needed by the RegEx devices in
order to work with the RegEX lib.
During the probe of a RegEx device, the device should configure itself,
and allocate the resources it requires.
On completion of the device init, it should call the
rte_regex_dev_register in order to register itself as a RegEx device.
Signed-off-by: Ori Kam <orika@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Acked-by: Guy Kaneti <guyk@marvell.com>
This commit introduce the rte_regexdev_core.h file.
This file holds internal structures and API that are used by
the regexdev.
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Guy Kaneti <guyk@marvell.com>
As RegEx usage become more used by DPDK applications, for example:
* Next Generation Firewalls (NGFW)
* Deep Packet and Flow Inspection (DPI)
* Intrusion Prevention Systems (IPS)
* DDoS Mitigation
* Network Monitoring
* Data Loss Prevention (DLP)
* Smart NICs
* Grammar based content processing
* URL, spam and adware filtering
* Advanced auditing and policing of user/application security policies
* Financial data mining - parsing of streamed financial feeds
* Application recognition.
* Dmemory introspection.
* Natural Language Processing (NLP)
* Sentiment Analysis.
* Big data database acceleration.
* Computational storage.
Number of PMD providers started to work on HW implementation,
along side with SW implementations.
This lib adds the support for those kind of devices.
The RegEx Device API is composed of two parts:
- The application-oriented RegEx API that includes functions to setup
a RegEx device (configure it, setup its queue pairs and start it),
update the rule database and so on.
- The driver-oriented RegEx API that exports a function allowing
a RegEx poll Mode Driver (PMD) to simultaneously register itself as
a RegEx device driver.
RegEx device components and definitions:
+-----------------+
| |
| o---------+ rte_regexdev_[en|de]queue_burst()
| PCRE based o------+ | |
| RegEx pattern | | | +--------+ |
| matching engine o------+--+--o | | +------+
| | | | | queue |<==o===>|Core 0|
| o----+ | | | pair 0 | | |
| | | | | +--------+ +------+
+-----------------+ | | |
^ | | | +--------+
| | | | | | +------+
| | +--+--o queue |<======>|Core 1|
Rule|Database | | | pair 1 | | |
+------+----------+ | | +--------+ +------+
| Group 0 | | |
| +-------------+ | | | +--------+ +------+
| | Rules 0..n | | | | | | |Core 2|
| +-------------+ | | +--o queue |<======>| |
| Group 1 | | | pair 2 | +------+
| +-------------+ | | +--------+
| | Rules 0..n | | |
| +-------------+ | | +--------+
| Group 2 | | | | +------+
| +-------------+ | | | queue |<======>|Core n|
| | Rules 0..n | | +-------o pair n | | |
| +-------------+ | +--------+ +------+
| Group n |
| +-------------+ |<-------rte_regexdev_rule_db_update()
| | | |<-------rte_regexdev_rule_db_compile_activate()
| | Rules 0..n | |<-------rte_regexdev_rule_db_import()
| +-------------+ |------->rte_regexdev_rule_db_export()
+-----------------+
RegEx: A regular expression is a concise and flexible means for matching
strings of text, such as particular characters, words, or patterns of
characters. A common abbreviation for this is â~@~\RegExâ~@~].
RegEx device: A hardware or software-based implementation of RegEx
device API for PCRE based pattern matching syntax and semantics.
PCRE RegEx syntax and semantics specification:
http://regexkit.sourceforge.net/Documentation/pcre/pcrepattern.html
RegEx queue pair: Each RegEx device should have one or more queue pair to
transmit a burst of pattern matching request and receive a burst of
receive the pattern matching response. The pattern matching
request/response embedded in *rte_regex_ops* structure.
Rule: A pattern matching rule expressed in PCRE RegEx syntax along with
Match ID and Group ID to identify the rule upon the match.
Rule database: The RegEx device accepts regular expressions and converts
them into a compiled rule database that can then be used to scan data.
Compilation allows the device to analyze the given pattern(s) and
pre-determine how to scan for these patterns in an optimized fashion that
would be far too expensive to compute at run-time. A rule database
contains a set of rules that compiled in device specific binary form.
Match ID or Rule ID: A unique identifier provided at the time of rule
creation for the application to identify the rule upon match.
Group ID: Group of rules can be grouped under one group ID to enable
rule isolation and effective pattern matching. A unique group identifier
provided at the time of rule creation for the application to identify
the rule upon match.
Scan: A pattern matching request through *enqueue* API.
It may possible that a given RegEx device may not support all the
features
of PCRE. The application may probe unsupported features through
struct rte_regexdev_info::pcre_unsup_flags
By default, all the functions of the RegEx Device API exported by a PMD
are lock-free functions which assume to not be invoked in parallel on
different logical cores to work on the same target object. For instance,
the dequeue function of a PMD cannot be invoked in parallel on two logical
cores to operates on same RegEx queue pair. Of course, this function
can be invoked in parallel by different logical core on different queue
pair. It is the responsibility of the upper level application to
enforce this rule.
In all functions of the RegEx API, the RegEx device is
designated by an integer >= 0 named the device identifier *dev_id*
At the RegEx driver level, RegEx devices are represented by a generic
data structure of type *rte_regexdev*.
RegEx devices are dynamically registered during the PCI/SoC device
probing phase performed at EAL initialization time.
When a RegEx device is being probed, a *rte_regexdev* structure and
a new device identifier are allocated for that device. Then, the
regexdev_init() function supplied by the RegEx driver matching the
probed device is invoked to properly initialize the device.
The role of the device init function consists of resetting the hardware
or software RegEx driver implementations.
If the device init operation is successful, the correspondence between
the device identifier assigned to the new device and its associated
*rte_regexdev* structure is effectively registered.
Otherwise, both the *rte_regexdev* structure and the device identifier
are freed.
The functions exported by the application RegEx API to setup a device
designated by its device identifier must be invoked in the following
order:
- rte_regexdev_configure()
- rte_regexdev_queue_pair_setup()
- rte_regexdev_start()
Then, the application can invoke, in any order, the functions
exported by the RegEx API to enqueue pattern matching job, dequeue
pattern matching response, get the stats, update the rule database,
get/set device attributes and so on
If the application wants to change the configuration (i.e. call
rte_regexdev_configure() or rte_regexdev_queue_pair_setup()), it must
call rte_regexdev_stop() first to stop the device and then do the
reconfiguration before calling rte_regexdev_start() again. The enqueue and
dequeue functions should not be invoked when the device is stopped.
Finally, an application can close a RegEx device by invoking the
rte_regexdev_close() function.
Each function of the application RegEx API invokes a specific function
of the PMD that controls the target device designated by its device
identifier.
For this purpose, all device-specific functions of a RegEx driver are
supplied through a set of pointers contained in a generic structure of
type *regexdev_ops*.
The address of the *regexdev_ops* structure is stored in the
*rte_regexdev* structure by the device init function of the RegEx driver,
which is invoked during the PCI/SoC device probing phase, as explained
earlier.
In other words, each function of the RegEx API simply retrieves the
*rte_regexdev* structure associated with the device identifier and
performs an indirect invocation of the corresponding driver function
supplied in the *regexdev_ops* structure of the *rte_regexdev*
structure.
For performance reasons, the address of the fast-path functions of the
RegEx driver is not contained in the *regexdev_ops* structure.
Instead, they are directly stored at the beginning of the *rte_regexdev*
structure to avoid an extra indirect memory access during their
invocation.
RTE RegEx device drivers do not use interrupts for enqueue or dequeue
operation. Instead, RegEx drivers export Poll-Mode enqueue and dequeue
functions to applications.
The *enqueue* operation submits a burst of RegEx pattern matching
request to the RegEx device and the *dequeue* operation gets a burst of
pattern matching response for the ones submitted through *enqueue*
operation.
Typical application utilisation of the RegEx device API will follow the
following programming flow.
- rte_regexdev_configure()
- rte_regexdev_queue_pair_setup()
- rte_regexdev_rule_db_update() Needs to invoke if precompiled rule
database not
provided in rte_regexdev_config::rule_db for rte_regexdev_configure()
and/or application needs to update rule database.
- rte_regexdev_rule_db_compile_activate() Needs to invoke if
rte_regexdev_rule_db_update function was used.
- Create or reuse exiting mempool for *rte_regex_ops* objects.
- rte_regexdev_start()
- rte_regexdev_enqueue_burst()
- rte_regexdev_dequeue_burst()
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Ori Kam <orika@mellanox.com>
RTE_TRACE_POINT_DEFINE and RTE_TRACE_POINT_REGISTER must come in pairs.
Merge them and let RTE_TRACE_POINT_REGISTER handle the constructor part.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
When using statically linked DPDK binaries, the EAL checks the default PMD
path and tries to load any drivers there, despite the fact that all drivers
are normally linked into the binary. This behaviour can cause issues if
the PMD path and lib dir is configured to a non-standard location which is
not in the ld.so.conf paths, e.g. a build with prefix set to a home
directory location. In a case such as this, EAL will try and
(unnecessarily) load the .so driver files but that load will fail as their
dependent libraries, such as ethdev, for example, will not be found.
Because of this, it is better if statically linked DPDK apps do not load
drivers from the standard paths automatically. The user can always have
this behaviour by explicitly specifying the path using -d flag, if so
desired.
Not loading the libraries automatically can also prevent potential issues
with a user building and running a statically-linked DPDK binary based off
a private copy of DPDK, while there exists on the same machine a
system-wide installation of DPDK in the default locations. Without this
change, the system-installed drivers will be loaded to the binary alongside
the statically-linked drivers, which is not what the user would have
intended.
To detect whether we are in a statically or dynamically linked binary, we
can have EAL try to get a dlopen handle to its own shared library, by
calling dlopen with the RTLD_NOLOAD flag. This will return NULL if there is
no such shared lib loaded i.e. the code is executing from a static library,
or a handle to the lib if it is loaded.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Tested-by: Sunil Pai G <sunil.pai.g@intel.com>
When loading a directory of drivers, we check the same hierarchy multiple
times. If we just cache the last directory checked, this avoids repeated
checks of the same path, since all drivers in that path have been added to
the list consecutively.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Any paths on the system which are world-writable are insecure and should
not be used for loading drivers. Therefore, whenever an absolute or
relative driver path is passed to EAL, check for world-writability and
don't load any drivers from that path if it is insecure. Drivers loaded
from system locations i.e. those passed without any path info and found
automatically by the loader, are excluded from these checks as system paths
are assumed to be secure.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
When we pass a "-d" flag to EAL pointing to a directory, we attempt to load
all files in that directory as driver plugins, irrespective of file type.
This procludes using e.g. the build/drivers directory, as a driver source
since it contains static libs and other files as well as the shared
objects.
By filtering out any files whose filename does not end in ".so", we can
improve usability by allowing other non-driver files to be present in the
driver directory.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Since strlcpy always null-terminates, and the buffer is zeroed before copy
anyway, there is no need to explicitly zero the end of the character
array, or to limit the bytes that strlcpy can write.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
