Add support for creating/destroying fdir filter.
The filter rule includes LACP,ARP and ICMP packet type.
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
Add support for creating/destroying ntuple filter.
The filter rule includes BGP and VRRP packet type.
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
This patch is to validate the filter rules, which includes
ntuple filter, ethertype filter and fdir filter. The packets
type that supported are BGP,VRRP,LACP,ARP and ICMP.
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
This patch adds fdir config operation, including set fdir filter,
normal filter, set and clear fdir tcam.
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
This patch adds unicast and multicast set interfaces.
Application can add or remove unicast MAC address, also can set
multicast MAC address, the maximum multicast list size is 2048.
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
When enable allmulticast mode, all multicast packets
can be received. This patch also adds support for MTU set,
the range of MTU is from 256 to 9600.
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
This patch introduces some HW interfaces required for SR-IOV function,
including: init hwdev, set port state, get default cos,
VF DMA attribute table, VF txrx flush and so on.
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
Add mbox command channel for SR-IOV, which is used to
communicate between VF and VF, VF and PF. This patch
introduces data structures, initialization, interfaces
and commands of mbox channel.
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
There is no need to assign return value to a temporary variable.
Instead return error directly in case of failure.
Fixes: 1fe427fd08 ("net/bnxt: support enable/disable interrupt")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Driver issues hwrm_if_change when the port is started and stopped.
This command returns whether the fw has undergone a reset while port
was down. Fix to handle hwrm_if_change status during port start only.
Fixes: 0b53359123 ("net/bnxt: inform firmware about IF state changes")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Driver issues hwrm_if_change when the port is started. This command
returns whether the fw has undergone a reset while port was down and
driver does re-init of resources if fw has undergone a reset.
Fix to enable interrupts only after this check.
Fixes: c023cd5b21 ("net/bnxt: fix async link handling and update")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
DPDK PCIe-VFIO framework configures base MSIX vector for interrupts
which is supported by other h/w. In case of bnxt, base MSIX vector
starts with the RX completion queue 0. To comply with the DPDK
framework We need to increase the map index by 1 so that RXTX
completion queues events can be delivered to appropriate event listeners
by kernel VFIO.
Fixes: bd0a14c99f ("net/bnxt: use dedicated CPR for async events")
Cc: stable@dpdk.org
Signed-off-by: Rahul Gupta <rahul.gupta@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
In stop_op(), don't wait for link down event's ASYNC response from FW.
Fixes: c023cd5b21 ("net/bnxt: fix async link handling and update")
Cc: stable@dpdk.org
Signed-off-by: Rahul Gupta <rahul.gupta@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The HWRM command timeout is set to a very high value.
VER_GET command response returns the default request timeout value.
Use this value for waiting for HWRM commands to complete.
Poll for the valid bit every 1us instead of 600us.
Fixes: cbcd375d37 ("net/bnxt: fix HWRM macros and locking")
Cc: stable@dpdk.org
Signed-off-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
We are currently logging trusted VF information everytime a VF config
change is indicated by the async message. Update it only when new
setting is different from the current setting.
Fixes: b42c15c83e ("net/bnxt: support trusted VF")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
bnxt.h header includes bnxt_cpr.h and bnxt_util.h.
There is no need to include these headers file explicitly.
This commit does not cause any functional change.
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Currently bnxt driver does not return error in case setting link up fails.
Fixes: 5c206086fe ("net/bnxt: add link state operations")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
If the VF resources need to be reconfigured using the
bnxt_hwrm_func_reserve_vf_resc, make sure that the default completion
ring is freed first before the resources are reserved.
Reallocate the ring once the VF resources are configured.
Fixes: 7bc8e9a227 ("net/bnxt: support async link notification")
Cc: stable@dpdk.org
Signed-off-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch fixes few checks and few return values while getting
and clearing device statistics.
1. Fixed to return standard error code.
2. Clubbed few error checks
3. Removed an unnecessary return check
Fixes: bfb9c2260b ("net/bnxt: support xstats get/reset")
Fixes: 8892013668 ("net/bnxt: support xstats get by id")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch add link related operations like
link update, up and down.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
To update MAC address or MTU, operations are
added to the driver.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch add support for supported packet types
by the platform andbasic statistics like
numbers of packets/bytes receive and transmit.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
HIF or host interface is responsible for transmit
and receive packets between physical ethernet
interfaces and HIF library defined logical interfaces.
This patch initialise that host interface and MAC.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
This patch add some hardware specific macros
and functions that will be used by the driver.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
pfe (packet forwarding engine) is a network
poll mode driver for NXP SoC ls1012a.
This patch introduces the framework of pfe
driver with basic functions of initialisation
and teardown.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
This code is being shared by more than 1 type of driver.
Common is most appropriate place for it.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
When OS sends more packets than are being read with a single
'rte_eth_rx_burst' call, rx packets are getting stucked in the tap pmd
and are unable to receive, because trigger_seen is getting updated
and consecutive calls are not getting any packets.
Do not update trigger_seen unless less than a max number of packets were
received allowing next call to receive the rest.
Remove unnecessary compiler barrier.
Fixes: a0d8e807d9 ("net/tap: add Rx trigger")
Cc: stable@dpdk.org
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Tested-by: Mariusz Drost <mariuszx.drost@intel.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Reviewed-by: Keith Wiles <keith.wiles@intel.com>
Flow Manager API is the new firmware interface that exposes match
action capabilities in 1400 series VIC adapters. It is intended for
virtual switch offloads and enables more advanced features than the
existing filter API. For example, it supports VXLAN encap and decap
actions, and exposes TCAM and exact match tables.
Add the new flow implementation using Flow Manager and use it when
available. When Flow Manager is not available, the driver will
continue to use the old filter-based flow implementation.
Signed-off-by: John Daley <johndale@cisco.com>
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Latest firmware supports Geneve with options offload. Current overlay
offload only supports Geneve with no options. This new feature is
disabled by default, as it is intrusive and cannot be used with flow
API. Add a new devarg 'geneve-opt' so the user can explicitly enable
it.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Both primary and secondary processes may call the queue start/stop,
link update handlers. These functions use the rte_eth_dev pointer
cached in the adapter private data (struct enic). But, this pointer is
valid only in the primary process, as rte_eth_dev addresses may differ
in different processes. Using that cached pointer in secondary
processes leads to a crash.
For the link update handler (enic_link_update), use the rte_eth_dev
pointer passed down from the rte layer as it is valid in the current
process. For the queue start/stop handlers (enic_start_wq and
friends), cache the rte_eth_dev_data pointer in the adapter private
data, and use that. rte_eth_dev_data is in shared memory and its
address is same across processes.
Fixes: 837e68ae94 ("net/enic: fix queue stop and start")
Fixes: cf8d9826b7 ("net/enic: extract code for checking link status")
Cc: stable@dpdk.org
Reported-by: Dirk-Holger Lenz <dirk.lenz@ng4t.com>
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Tested-by: Dirk-Holger Lenz <dirk.lenz@ng4t.com>
Reviewed-by: John Daley <johndale@cisco.com>
Only the primary process initializes the adapter private data and
rte_eth_dev_data. For secondary processes, do not touch them.
Secondary processes need to select the right Tx and Rx handlers. Pick
the same handlers that the primary process uses.
Fixes: fefed3d1e6 ("enic: new driver")
Cc: stable@dpdk.org
Reported-by: Dirk-Holger Lenz <dirk.lenz@ng4t.com>
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Tested-by: Dirk-Holger Lenz <dirk.lenz@ng4t.com>
Reviewed-by: John Daley <johndale@cisco.com>
Adding support to parse GTPU flag for RSS hash index calculation in
octeontx2.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
MC firmware is the core component of FSLMC bus and net/DPAA2 devices.
Prior to this patch, MC firmware supported 10.14.x version. This
patch bumps the min supported version to 10.18.x.
Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
MC firmware is the core component of FSLMC bus and DPAA2 devices.
Prior to this patch, MC firmware supported 10.14.x version. This
patch bumps the min supported version to 10.18.x.
Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The receive queues list size is based on the size of uint32_t, so
when allocating the memory, the correct value should be used. Or
else there is risk to corrupt the memory, depending on the queues
number, because there is some pad area for alignment. If the queue
number is not large enough, the issue couldn't be observed.
Fixes: dc9ceff73c ("net/mlx5: create advanced RxQ via DevX")
Cc: stable@dpdk.org
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The Item order validation between L2 and L3 is missing, which leading to
the following flow rule is accepted:
testpmd> flow create 0 ingress pattern ipv4 / eth / end actions drop /
end
Only the outer L3 layer should check whether the L2 layer is present,
because the L3 layer could directly follow the tunnel layer
without L2 layer.
Meanwhile inner L2 layer should check whether there is inner L3 layer
before it.
Fixes: 23c1d42c71 ("net/mlx5: split flow validation to dedicated function")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
On x86, iopl permissions are only available to root user (or users that
have the CAP_SYS_RAWIO capability).
But those permissions are only needed when the virtio devices accesses
are done with inb/outb instructions, which is when the device is bound
to a UIO kernel module.
So far, the virtio driver was refusing to register based on the check
on IO permissions.
This check does not make sense when binding the device to vfio.
Now that the check on IO permissions has been abstracted in the ioport
API, we can remove it on virtio side.
We still need to call rte_eal_iopl_init() in the virtio constructor so
that the interrupt thread inherits this permission in the case it could
be used with UIO later.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Tiwei Bie <tiwei.bie@intel.com>
On x86, calling inb/outb special instructions (used in UIO ioport
read/write parts) is only possible if the right IO permissions has been
granted.
The only user of this API (the net/virtio pmd) checks this
unconditionnaly but this should be hidden by the rte_pci_ioport API
itself and only checked when the device is bound to a UIO driver.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The makefile in drivers/bus/pci specified rte_ethdev as a dependency for
the library. However there are no actual symbols from librte_ethdev used
in librte_bus_pci.
Including librte_ethdev as a dependency only becomes a problem in some
niche cases like when attempting to build the rte_bus_pci library as a
shared object without building the rte_ethdev library.
I specifically ran into this when trying to build the DPDK included as
an SPDK submodule on a FreeBSD machine. I figure that since there are no
real dependencies between the two, we should enable building
librte_bus_pci without librte_ethdev.
Fixes: c752998b5e ("pci: introduce library and driver")
Cc: stable@dpdk.org
Signed-off-by: Seth Howell <seth.howell@intel.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
The "in" keyword was introduced in meson 0.49, which means we need to use
an old-fashioned loop to check the array of disabled drivers.
Fixes: 6f80f1cd22 ("build: support disabling drivers with meson")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Memory required for the mempool objects need not be physically
contiguous on octeontx2's HW, mempool pmd supports the minimum chunk
size set by the default handler. Hence discarding the limitation set
by the pmd on the min_chunk_size value.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Polling of MMIO register could misreport the actual value
set dynamically in hardware as the variable was not set explicitly
to volatile integer.
Fixes: efd453698c ("baseband/fpga_lte_fec: add driver for FEC on FPGA")
Cc: stable@dpdk.org
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
A change to PCI mapping assumption was missed earlier, this causes
probing to fail with the fpga_lte_fec PMD when checking for name
of the rte_driver (not set yet) instead of the rte_pci_driver.
Fixes: 391797f042 ("drivers/bus: move driver assignment to end of probing")
Cc: stable@dpdk.org
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
AES-CMAC is used in 3gpp specifications hence it is needed
to support 4 byte digest.
Fixes: 91c1daa4e1 ("crypto/qat: support AES-CMAC")
Cc: stable@dpdk.org
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
This patch adds option to use asymmetric crypto pmd with
session-less support.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
When running auth NULL cases while using
vfio_pci, DMAR read/write faults appear. It
happens even if digest_length is set to 0.
This is caused by auth_res_addr initialized
as 0x0.
Fixes: 4e0955bddb ("crypto/qat: fix null auth algo overwrite")
Cc: stable@dpdk.org
Signed-off-by: Damian Nowak <damianx.nowak@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
The IPSec Multi buffer library does not require AES-NI
instructions to be supported by the CPU, as it can emulate these
instructions in software (adding a big performance penalty when
using AES algorithms).
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The IPSec Multi buffer library does not require AES-NI
instructions to be supported by the CPU, as it can emulate these
instructions in software (adding a big performance penalty when
using AES algorithms).
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The SEC HW code is being shared by multiple NXP based
drivers. It is better to place it at a common place.
Current users are:
1. DPAA2_SEC
2. DPAA_SEC
3. CAAM_JR
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add helper functions to get meta len for asymmetric operations
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Kanaka Durga Kotamarthy <kkotamarthy@marvell.com>
Signed-off-by: Sunila Sahu <ssahu@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The session related parameters shall be populated during
the session create only.
At the runtime on first packet, the CDB should just reference
the session data instead of re-interpreting data again.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch add support for ZUC and SNOW 3G in
non-PDCP offload mode.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
For cases like ESN where authentication data can be after cipher
data, support for authentication trailer is required.
This patch adds support of auth-only data trailing after cipher data.
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The GCM descriptors needlessly skip auth_only_len bytes from output
buffer. Due to this, workarounds have to be made in dpseci driver code.
Also this leads to failing of one cryptodev test case for gcm. In this
patch, we change the descriptor construction and adjust dpaaX_sec
accordingly. The test_AES_GCM_auth_encrypt_SGL_out_of_place_400B_1seg
now passes.
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The code shall also check aead as non auth-cipher case
Fixes: 1f14d500bc ("crypto/dpaa_sec: support IPsec protocol offload")
Cc: stable@dpdk.org
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Now that -Wextra, and other warning flags are standard in the build, remove
any duplication in driver build specifications.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
While meson always adds -Wall flag to C compiles, the make build adds extra
warning flags that are not present in the meson build. This addresses that
shortcoming by adding additional warning flags to our builds. The one
omission is the -Wcast-align flag, which though present in make gcc builds,
gives a lot of warnings/errors when used with clang.
The removed warning "-Wunused-parameter" is covered by the "-Wextra"
parameter so is unnecessary.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
The warning disable flags for the base driver code were copy-pasted from
another source, and are actually unnecessary for this driver. Therefore
remove them.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
DPDK currently compiles with implicit-fallthrough=2 warning level. With gcc
-Wextra flag, the default level is 3, so some minor changes are needed to
support this in DPDK.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Add support for a new build option to turn off certain drivers. Any other
drivers which depend on the one being disabled will also be disabled with a
suitable debug message.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
If we want to add support for turning off components because of missing
dependencies, then we need to check for those dependencies before we
make a determination as to whether a component should be built or not,
assuming that the component says it should be built.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The variable names in the library and drivers meson.build files are slighty
different with "static_deps" in one and "static_objs" in the other. Rename
to use "static_deps" in both for consistency.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
To help developers to get the correct dependency name e.g. when creating a
new example that depends on a specific component, print out the dependency
name for each lib/driver as it is processed.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This patch adds the support of Tx adapter for DPAA2 platform
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch sets the priority of the dpcon dev, such that it is
within the supported range of dpcon
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch adds the support of Tx adapter for DPAA1 platform
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The number of atomic flows supported was not returned correctly for
DPAA driver. This patch fixes the same.
Fixes: b08dc6430a ("event/dpaa: add queue config get/set")
Cc: stable@dpdk.org
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch introduces a `flag` in the Eth TX adapter enqueue API.
Some drivers may support burst functionality only with the packets
having same destination device and queue.
The flag `RTE_EVENT_ETH_TX_ADAPTER_ENQUEUE_SAME_DEST` can be used
to indicate this so the underlying driver, for drivers to utilize
burst functionality appropriately.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Introduce enqueue and dequeue functions to support packet based
processing. And enable write-combining for ntb driver since it
can improve the performance a lot.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Add xstats support for NTB rawdev.
Support tx-packets, tx-bytes, tx-errors and
rx-packets, rx-bytes, rx-missed.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Setup and init NTB txq and rxq. And negotiate queue information
with the peer. If queue size and number of queues are not
consistent on both sides, return error.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
This patch add support for testing dpaa2 eventdev self test
for basic sanity for parallel and atomic queues.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The patch adds the break in the TX function, if it is failing
to send the packets out. Previously the system was trying
infinitely to send packet out.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
This patch removes the conditional compilation for
cryptodev event support from RTE_LIBRTE_SECURITY flag.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Test vector expect only one type of scheduling as default.
The old code is provide support scheduling types instead of default.
Fixes: 13370a3877 ("eventdev: fix inconsistency in queue config")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Octeontx2 SSO co-processor allows multiple ethernet device Rx queues
connected to a single Event device queue.
Fix the Rx adapter capabilities to allow application to configure
Rx queueus in n:1 ratio to event queues by adding
`RTE_EVENT_ETH_RX_ADAPTER_CAP_MULTI_EVENTQ` as a capability.
Fixes: 37720fc1fb ("event/octeontx2: add Rx adapter")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
The sw PMD implements xstats reset by having the xstat get operations
return a value to the statistic's value at the last reset. The value at the
last reset is maintained in the per-xstat reset_value field, but the PMD
was setting reset_value = current - reset_value instead of reset_value =
current.
Fixes: c1ad03df7a ("event/sw: support xstats")
Cc: stable@dpdk.org
Signed-off-by: Gage Eads <gage.eads@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
The routine mlx5dv_query_devx_port() was called directly
instead of using the mlx5 glue thunk.
Fixes: d5c06b1b10 ("net/mlx5: query vport index match mode and parameters")
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
In LAG configuration the devices in the same switch domain
might be spawned on the base of different PCI devices, so
we should check all devices backed by mlx5 PMD whether they
belong to specified switch domain. When the new devices are
being created it is not possible to detect whether the
sibling devices created in the current probe() loop belong
to the driver, driver field is not filled yet (it will be
done on returned success of current probe()). This patch
updates the device scanning, allowing extra match on
current backing PCI device, is being used to create siblings.
Fixes: f7e95215ac ("net/mlx5: extend switch domain searching range")
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The hardware may have limitations on maximal amount of
supported Tx descriptors building blocks (WQEBB). Application
requires the Tx queue must accept the specified amount of packets.
If inline data feature is engaged the packet may require more WQEBBs
and overall amount of blocks may exceed the hardware capabilities.
Application has to make a trade-off between Tx queue size and maximal
data inline size.
In case if the inline settings are not requested explicitly with
devarg keys the default values are used. This patch adjusts the
applied default values if large Tx queue size is requested and
default inline settings can not be satisfied due to hardware
limitations.
The explicitly requested inline setting may be aligned (enlarging
only) by configurations routines to provide better WQEBB filling,
this implicit alignment is the subject for adjustment either.
The warning message is emitted to the log if adjustment happens.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
When rules are being inserted from multiple cores, there are several
race conditions during rte_flow operations.
For example, when inserting rules from 2 cores simultaneously, both
the cores try to fetch a free available filter entry and they both
end up fetching the same entry. Both of them start overwriting the
same filter entry before sending to firmware, which results in wrong
rule being inserted to hardware.
Fix the races by adding spinlock to serialize the rte_flow operations.
Fixes: ee61f5113b ("net/cxgbe: parse and validate flows")
Fixes: 9eb2c9a480 ("net/cxgbe: implement flow create operation")
Fixes: da23bc9d33 ("net/cxgbe: implement flow destroy operation")
Fixes: 8d3c12e193 ("net/cxgbe: implement flow query operation")
Fixes: 86910379d3 ("net/cxgbe: implement flow flush operation")
Cc: stable@dpdk.org
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Scattered receive is supported but not included in receive offload
capabilities. Fix by adding it and including in scattered receive
calculation.
Fixes: 9c1507d96a ("net/bnxt: switch to the new offload API")
Cc: stable@dpdk.org
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Use first receive queue assigned to VNIC as the default receive queue
when configuring Thor VNICs. This is necessary e.g. in order for flow
redirection to a specific receive queue to work correctly.
Fixes: f8168ca0e6 ("net/bnxt: support thor controller")
Cc: stable@dpdk.org
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The required number of statistics contexts is computed as the sum
of the number of receive and transmit rings plus one for the async
completion ring. A statistics context is not actually required for
the async completion ring, so remove it from the calculation.
Fixes: bd0a14c99f ("net/bnxt: use dedicated CPR for async events")
Cc: stable@dpdk.org
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Thor queue scaling is currently limited by the number of NQs that
can be allocated. Fix by using a common NQ for all receive/transmit
rings instead of allocating a separate NQ for each ring.
Fixes: f8168ca0e6 ("net/bnxt: support thor controller")
Cc: stable@dpdk.org
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Class of Service (CoS) is a way to manage multiple types of
traffic over a network to offer different types of services
to applications. CoS classification (priority to cosqueue) is
determined by the user and configured through the PF driver.
DPDK driver queries this configuration and maps the cos queue
ids to different VNICs. This patch adds this support.
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add support for LRO for adapters based on Thor (BCM57508).
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
When using transmit/receive queue sizes smaller than 256, alignment
requirements are not being met for Thor-based adapters. Fix by
forcing memory addresses used for transmit/receive/aggregation ring
allocations to be on 4K boundaries.
Fixes: f8168ca0e6 ("net/bnxt: support thor controller")
Cc: stable@dpdk.org
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Driver uses the Firmware mailbox to read statistics and configure
some features.
This patch introduces a mutex to provide consistent access to the
FW mailbox to prevent potential data corruption.
Fixes: 86d36773bd ("net/atlantic: implement firmware operations")
Cc: stable@dpdk.org
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Driver reports current flow control mode based on internal flow control
settings. Currently this logic works incorrectly.
Fixes: 921eb6b8ce ("net/atlantic: fix flow control by sync settings on Rx")
Cc: stable@dpdk.org
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Currently, driver always return full set of xstats counters, including
MACSEC counters. But this driver also supports AQC100 chips, which
does not have MACSEC feature.
This fix adds checking for MACSEC availability (based on FW capability
bits) and returns xstats without MACSEC counters if MACSEC feature
is not available.
Fixes: 09d4dfa853 ("net/atlantic: implement MACsec statistics")
Cc: stable@dpdk.org
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
When computing the head of CQE ring of prefetch, use qmask to point to
the correct head index on wrap around case.
Fixes: cc4d7693f2 ("net/octeontx2: support Rx")
Cc: stable@dpdk.org
Signed-off-by: Kommula Shiva Shankar <kshankar@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Use latest firmware 7.13.11.
7.13.11 FW changelog:
- Packets from a VF with pvid configured which were sent with a
different vlan were transmitted instead of being discarded.
- In some multi-function configurations, inter-PF and inter-VF
Tx switching is incorrectly enabled.
- Wrong assert code in FLR final cleanup in case it is sent not
after FLR.
- Chip may stall in very rare cases under heavy traffic with FW GRO
enabled.
- VF malicious notification error fixes.
- Default gre tunnel to IPGRE which allows proper RSS for IPGRE
packets, L2GRE traffic will reach single queue.
- Removes unnecessary internal mem config, latest FW performs this
autonomously.
Update the PMD version to 1.1.0.1.
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Update hardware software common base driver code in preparation to
update the firmware to version 7.13.11.
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Update and reorganize HW registers in preparation to update the firmware
to version 7.13.11.
Move HW_INTERRUT_ASSERT_SET_0 out from ecore_reg.h to bnx2x.h.
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Caught by clang, this idx value is only used for a debug message when
the mbufs allocation fails.
No need to use idx as a temporary storage.
Fixes: 8f23124745 ("net/qede: fix performance bottleneck in Rx path")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Rasesh Mody <rmody@marvell.com>
Add support to below TCP segmentation offloads for
96XX A1 onwards and 95xx B0 onwards.
- TCPv4, TCPv6
- VXLAN[v4 | v6][v4 | v6]
- GENEVE[v4 | v6][v4 | v6]
This patch also modifies a fastpath function to be forced
inline due to performance reasons for multi-seg mode.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Adding change to sync RTE Flow with KPU profile to extract
NVGRE as ltype.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Adding support for tx descriptor status dev ops for octeontx2.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Update LB ltypes and use the updated ones so as replace
LB_STAG and LB_QINQ by single LB_STAG_QINQ ltype.
Signed-off-by: Vivek Sharma <viveksharma@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Allow VFs to enable backpressure for performance reasons.
The backpressure control is with kernel AF driver that will enable
backpressure even if one PF/VF requests it and disable it only
after all the PFs/VFs request for disable.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
NPC errors were incorrectly translated to ol_flag as
error code enum was not in sync with NPC profile.
Fixes: 371d3212cb ("common/octeontx2: add build infrastructure and HW definition")
Cc: stable@dpdk.org
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
We are not freeing all the flows when a flow_flush is called.
Iterate through all the flows belonging to all the VNICs in use and
free the filters.
Fixes: 4ace85a7da ("net/bnxt: allocate rings and groups")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Rahul Gupta <rahul.gupta@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Fixed multicast filter programming and allmulti programming.
Fixed to skip programming multicast macs if the user requests
allmulti mode.
Also removed a comment in bnxt_hwrm_cfa_l2_set_rx_mask() which is
no longer valid now.
Fixes: d69851df12 ("net/bnxt: support multicast filter and set MAC addr")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Currently, when hw-vlan-filter is enabled on testpmd, driver is
receiving all vlan packets. Instead, it should only receive untagged
packets and vlan packets for which the VLAN filter is programmed.
This is because, the default rule to match on MAC is not getting
deleted, when hw-vlan-filter is ON.
This patch fixes the problem, by deleting the default MAC rule and
programming a new rule to receive only untagged packets, when
hw-vlan-filter is enabled & another rule for each vlan, as and when
that vlan is configured on that port.
Fixes: 246c5cc5f0 ("net/bnxt: use correct flags during VLAN configuration")
Cc: stable@dpdk.org
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
When a drop action for L2 filters is specified, support it.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Rahul Gupta <rahul.gupta@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Currently, there are four flow related functions, namely
bnxt_flow_create, bnxt_flow_destroy, bnxt_flow_validate,
bnxt_flow_flush. All these functions are not multi-thread safe.
This patch fixes it by synchronizing these functions with a lock.
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
If flow creation fails because of an HWRM command failure or
or some other reason, reset the vnic and rxq info set earlier.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Rahul Gupta <rahul.gupta@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
In bnxt_rss_hash_update_op, driver is proceeding with
bnxt_hwrm_vnic_rss_cfg even though RSS hashkey length is invalid.
This patch fixes the problem by returning -EINVAL when RSS hashkey
length is invalid.
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Rahul Gupta <rahul.gupta@broadcom.com>
Reviewed-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
If driver init/probe fails as part of cleanup/rollback, we may end
up invoking this HWRM cmd even on an invalid vNIC which will
unnecessarily log an error message as the cmd will fail.
Check for invalid ID before issuing the HWRM cmd
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Rahul Gupta <rahul.gupta@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Check device is started before flow creation.
Since the vnic data structures aren't created until device start,
the driver dereferences NULL vnic if flow creation is attempted before
device is started,
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Initialize all rings to INVALID_HW_RING_ID.
This can be used to determine the rings to free if allocation fails.
Signed-off-by: Rahul Gupta <rahul.gupta@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Check if the application is trying to create filters using
broadcast and multicast MAC address and reject it.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Rahul Gupta <rahul.gupta@broadcom.com>
Reviewed-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Driver was incorrectly programming the MAC with the already
configured one instead of the newly requested MAC by user.
Also, fix to restore the old mac address back to the default
vnic filter if the mac update operation fails.
Fixes: 68f589f2c7 ("net/bnxt: fix setting primary MAC address")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
When an application issues flow validate, we free the temporary
filter that is created. But the vnic is not freed up. This can
potentially interfere with subsequent flow creation. So free the vnic.
Reviewed-by: Rahul Gupta <rahul.gupta@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Once the last filter associated with a VNIC is deleted when using
RSS action or the Queue action free the VNIC. Also free the RSS
context if the VNIC is using it.
Reviewed-by: Rahul Gupta <rahul.gupta@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Parse priority attribute during flow creation.
This information will be used to give a hint to the FW to
place the flow rule accordingly in the CFA tables.
Reviewed-by: Rahul Gupta <rahul.gupta@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add support for RSS action during flow creation.
group id should not be 0 when RSS action is specified. Driver will
return an error for such a flow.
If a group id is used to create a filter with “n” RSS queues, it cannot
be used to create a filter with a different number of RSS queues till
all the flows using that combination are deleted.
While creating a flow if a group id groups a certain Rx queue ids for
RSS, the same group id shall not create a flow with a different group of
Rx queue ids till all the flows belonging to the group ids are deleted.
While creating a flow if a group id groups a certain Rx queue ids for
RSS, the same queue ids shall not be used with a different group id till
all flows created with that group id are deleted.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Rahul Gupta <rahul.gupta@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
We are currently creating only outer DMAC filters.
Create SMAC and inner DMAC filters using HWRM_CFA_L2_FILTER_ALLOC.
For this the HWRM_CFA_L2_FILTER_ALLOC has already been updated.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Rahul Gupta <rahul.gupta@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Currently flow creation is allowed with queue action only
when RSS is disabled. Remove this restriction. Flows can be
created when RSS is enabled.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Rahul Gupta <rahul.gupta@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
If the FW returns an error for an HWRM request, it does not necessarily
return standard error codes.
Convert these HWRM errors to standard errno.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The library libsze2 provides a pkg-config file: libsze2.pc.
Looking for this .pc file - with dependency() - is preferred
than looking for the library - with cc.find_library().
If the library is not installed in a standard path,
it can be found thanks to PKG_CONFIG_PATH variable.
The previous solution required to use CFLAGS and LDFLAGS
environment variables.
Fixes: 508cfe6be9 ("net/szedata2: add to meson build")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Jan Remes <remes@netcope.com>
The library libnfb is part of netcope-common which provides
a pkg-config file: netcope-common.pc.
Looking for this .pc file - with dependency() - is preferred
than looking for the library - with cc.find_library().
If the library is not installed in a standard path,
it can be found thanks to PKG_CONFIG_PATH variable.
The previous solution required to use CFLAGS and LDFLAGS
environment variables.
Fixes: 6435f9a0ac ("net/nfb: add new netcope driver")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Jan Remes <remes@netcope.com>
qede has been dropped from the drivers/net meson.
Add it again.
Fixes: 9a8864c8b5 ("net/octeontx2: add build and doc infrastructure")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Earlier, there was a single MCP handle which was available across
complete DPAA2 driver as well as part of the dev_private which was
shared by the secondary process.
For secondary, that is not valid and it would require to open its
own handle for the MC. This is eventually used as part of the DPNI
configuration.
By using the process_private member of the rte_eth_dev, it is
possible to keep separate handles per process. Without worry of
overwriting when secondary process accesses the dev_private.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Reviewed-by: Sachin Saxena <sachin.saxena@nxp.com>
DPAA2 support VFIO device passthrough in VM.
However in this case, each device is associated with different vfio group.
This code required different container id for each group.
On using the same container fd the second time,
ioctl calls are returning error.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
DMA mapping is a property of primary process - SMMU population done
once by primary doesn't need to be populated again in secondary
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Reviewed-by: Sachin Saxena <sachin.saxena@nxp.com>
The address translation support for PA->VA is required only in
case of PA mode operation of DPDK. This was causing warning to
be reported on running any DPAA2 application in VA mode:
Add: Incorrect entry for PA->VA Table(xxxxxxxxxx)
Add: Lowest address: xxxxxxxxxxxx
This was caused by call to update the DPAAX table when VA mode
was enabled, in which case the VA==IOVA address.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Reviewed-by: Sachin Saxena <sachin.saxena@nxp.com>
This patch adds the support for PTP driver for
DPAA2 devices.
To enable set
CONFIG_RTE_LIBRTE_IEEE1588=y in
config/defconfig_arm64-dpaa2-linuxapp-gc
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch add support for dprtc
(Data Path Real Time Clock) sub-module
based on MC 10.16.0 flib.
It provides interface for PTP stack software
to access physical IEEE 1588 Real Time Clock.
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
IEEE1588 driver needs timestamp of packets.
For DPAA2, the timestamp of TX packets is
stored in annotation area of corresponding
TX confirmation packet.
This patch enables timestamp fields in
annotation area and TX confirmation mode if
CONFIG_RTE_LIBRTE_IEEE1588 is set in
config/defconfig_arm64-dpaa2-linuxapp-gc
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
TX confirmation mode provides dedicated confirmation
queues for transmitted packets. These queues are used
by software to get the status and release
transmitted packets buffers.
By default TX confirmation mode is kept disabled.
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The existing taildrop was based on queue data size.
This patch replaces it with frame count bases using
CGR methods of DPAA2 device.
The number of CGRs are limited. So,
- use per queue CGR based tail drop for as many as CGR
available.
- Remaining queues shall use the legacy byte based tail drop
Number of CGRs can be controlled by dpl file during dpni_create.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
When we need particular number of packets from the rx routine,
which would change in every call, we cannot prefetch the packets
and provide previous results to the user.
User can select the mode by using devargs for non prefetch mode.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch adds support for Scatter Gather
in the transmit side, for the cases where the
buffer are received which are not from DPAA
buffer pool.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch adds support for dpaa eth driver
interrupt enable and disable callback functions.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch adds interrupt handler support for
the ethernet devices which are configured with
a dedicated portal for packet Rx
(i.e. for FQ's in push mode).
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The decoupling of FQ portal allocation is required as a
pre-requisite to support Rx interrupts as we need to have
event FD's at portal allocation i.e. before the
initialization of the Frame Queues.
This change will help us get the event fd once the portals
have been allocated for static FQ's.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Thread affinity is already taken care by DPDK. Remove them from bus.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch also align few RX offload support to right category.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reviewed-by: Sachin Saxena <sachin.saxena@nxp.com>
The black list of dpaa_sec devices fails.
EAL: failed to parse device "dpaa:dpaa_sec-1"
This patch address following issues:
- bus usages dpaa-sec while the driver usage dpaa_sec
- bus usages numbers from 0 to MAX_SEC - while driver
probe usages sec number form max-fman_device +1
Fixes: 6e0752205b ("bus/dpaa: support device blacklisting")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reviewed-by: Sachin Saxena <sachin.saxena@nxp.com>
Minor code cleanup. BNXT_GET_DEFAULT_VNIC macro returns the default VNIC
of the function and fixed code to use the macro.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Driver will accelerate only outer/S-VLAN insertion by turning on
the appropriate bits in the Tx Buffer Descriptor when the packet
arrives for transmission.
The TPID to be used for this S-VLAN is conveyed by the vlan_tpid_set
dev_op which will terminate in the driver.
In the Rx path, driver will continue providing the stripped vlan tag
in the mbuf's vlan tci field. This would be the outermost vlan tag
in a double-tagged packet or the vlan tag for a single vlan tagged pkt.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The secondary process should not modify device state when
init is called. The pci device information pointed to by
dev_private pointer is not correct in secondary process.
Fixes: b7778e8a1c ("net/bnxt: refactor to properly allocate resources for PF/VF")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Fix Computing of number of used descriptors in an Rx queue.
Fixes: 1b7ceba3e3 ("net/bnxt: support Rx queue count")
Cc: stable@dpdk.org
Signed-off-by: Rahul Gupta <rahul.gupta@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Check input argument "rxq" in bnxt_rx_queue_release_mbufs(), to be sure
variable is not NULL before accessing it.
Fixes: 9b63c6fd70 ("net/bnxt: support Rx/Tx queue start/stop")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Since bnxt_enable_int() is called at start time,
invoke bnxt_disable_int() during stop only.
Remove it from device uninit function.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
HWRM_CHECK_RESULT_SILENT() returns if the HWRM command fails.
There is no need to check the return value after this call.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Driver should not change "deferred_start" state of the tx queues.
It should get the state in queue_setup_op() and use that value.
Since the deferred start state was being used in the packet transmit
functions to determine whether the queue has been stopped already,
introduced a per-txq flag to track queue stopped/started state.
Fixes: 9b63c6fd70 ("net/bnxt: support Rx/Tx queue start/stop")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
On Wh+, number of L2 context supported by FW is the sum of number of
EM flow count and number of L2 context count returned in HWRM_FUNC_QCFG.
This is not true for Thor. Restrict this only for Whitney for now.
Fixes: ff9c0ca47e ("net/bnxt: save the number of EM flow count")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Link auto negotiation for 40G is not supported by Thor.
Hence speed needs to be forced and autoneg disabled to configure 40G
speed.
Fixes: f8168ca0e6 ("net/bnxt: support thor controller")
Cc: stable@dpdk.org
Signed-off-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
When updating the link because of an async link notification
there is no need to set wait_for_completion. At this point
the link related information should be available without need to poll.
Use rte_eth_linkstatus_set instead of memcpy to ensure atomicity
while updating the link status.
We force the physical link down as a part of device stop.
But we are not waiting there enough and handling the async notification
before exiting. It just sits in the default CQ till we do a device
start.
Fix it by calling the CQ handler in device stop.
Fixes: 7bc8e9a227 ("net/bnxt: support async link notification")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
We are not subscribing to link speed change notification.
This patch addresses that.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Rahul Gupta <rahul.gupta@broadcom.com>
Reviewed-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Driver should not change "deferred_start" state of the rx queues.
It should get the state in queue_setup_op() and use that value.
Since the deferred start state was being used in the packet receive
functions to determine whether a stopped rx ring should be polled,
introduced a per-rxq flag to track queue stopped/started state.
Fixes: 9b63c6fd70 ("net/bnxt: support Rx/Tx queue start/stop")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Maximum frame length supported by hw is 9600 bytes.
When user launches testpmd with --mbuf-size=9729,
we are posting buffer descriptors of size 9601 to the ring.
This was causing packets getting discarded.
Fixes: daef48efe5 ("net/bnxt: support set MTU")
Cc: stable@dpdk.org
Signed-off-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
When user creates a flow similar to an existing flow with just the
destination queue change, we delete the old filter and allocate a new
one with this destination queue change. We were also allocating a new L2
filter matching the same destination mac resulting in 2 L2 filters for the
same destination mac.
This was causing any flow matching the destination mac to be steered to
this queue instead of the default queue.
Fixed it by deleting this stale L2 filter.
Fixes: 5c1171c972 ("net/bnxt: refactor filter/flow")
Cc: stable@dpdk.org
Signed-off-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The doorbell ringing operation requires a rte_io_mb immediately to make
the command complete and visible to the device before reading the
response, otherwise it may read stale or invalid responses.
Fixes: ca241d9a09 ("net/bnxt: use I/O device memory read/write API")
Cc: stable@dpdk.org
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
To read the doorbell response, which is held in the host CIO memory,
rte_cio_rmb is sufficient.
Fixes: 804e746c7b ("net/bnxt: add hardware resource manager init code")
Cc: stable@dpdk.org
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
As there is an inclusive rte_io_wmb within the following rte_write32()
API who rings the doorbell, this makes the above rte_wmb unnecessary and
remove it.
Fixes: 1cd45aeb32 ("net/bnxt: support Stratus VF device")
Cc: stable@dpdk.org
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Steve Capper <steve.capper@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
To guarantee the orderings of successive stores to CIO and MMIO memory,
a lighter weight rte_io_wmb [1] can be used instead of rte_wmb, and since
the ICE_PCI_REG_WRITE API already has an inclusive rte_io_wmb, this
explicit call can even be saved.
[1] http://git.dpdk.org/dpdk/tree/lib/librte_eal/common/include/generic/
rte_atomic.h#n98
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
To guarantee the orderings of successive stores to CIO and MMIO memory,
a lighter weight rte_io_wmb [1] can be used instead of rte_wmb, and since
the I40E_PCI_REG_WRITE API already has an inclusive rte_io_wmb, this
explicit call can be even saved.
[1] http://git.dpdk.org/dpdk/tree/lib/librte_eal/common/include/generic/
rte_atomic.h#n98
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
On Thor, direct access to PTP registers (via GRC) is not supported.
Driver must use HWRM to access the timestamp information.
Vectorized Rx/Tx cannot be enabled if RTE_LIBRTE_IEEE1588=y.
Remove the PTP flags handling code from the vector Rx path.
Add support to read tx timestamp value and the time from the
timesync clock.
On Thor, Rx timestamps are provided directly in the Rx completion
records to the driver. Only 32 bits of the timestamp is present in
the completion. Driver needs to read the current 48 bit free running
timer using the HWRM_PORT_TS_QUERY command and combine the upper
16 bits from the HWRM response with the lower 32 bits in the
Rx completion to produce the 48 bit timestamp for the Rx packet.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
use BIT macro instead of bit fields.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Commit "bd0a14c99f65" enables the creation of a dedicated completion
ring for asynchronous event handling instead of handling these
events on a receive completion ring on non Stingray Platforms.
This causes a segfault due to NULL pointer dereference in
bnxt_alloc_async_cp_ring() on stingray. Fix this by checking the
pointer validity before accessing it.
Fixes: bd0a14c99f ("net/bnxt: use dedicated CPR for async events")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Rahul Gupta <rahul.gupta@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
When IOMMU is available, EAL picks IOVA as VA as the default IOVA mode.
This causes the bnxt driver to log warning messages saying
"Memzone physical address same as virtual." and
"Using rte_mem_virt2iova()" during load.
Reduce the verbosity of logs to DEBUG. Reduced couple of other
logs level to DEBUG as well.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
FW sets HWRM_FUNC_QCAPS_OUTPUT_FLAGS_ERR_RECOVER_RELOAD
in HWRM_FUNC_QCAPS command, if device requires to invoke
fastboot FW during FW reset.
Driver has to poll for shutdown bit in fw_status register:
1. in case of hot fw upgrade, this bit will be set after all
function drivers unregistered with fw.
2. in case of fw initiated error recovery, this bit will be
set after fw has collected the core dump
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Rahul Gupta <rahul.gupta@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Added code to perform FW_RESET. When the driver detects error in FW,
it has to initiate the recovery by resetting the cores. FW advertise
the method to do a core reset, reset register offsets and values
to perform reset in response of HWRM_ERROR_RECOVERY_QCFG command.
There are 2 ways to recover from the error.
1. Master function issues core resets to recover from error.
2. Master function detects chimp dead condition and notify the Kong
processor about the chimp dead case through FW_RESET HWRM command.
Kong Processor send an RESET_NOTIFY async event with
REASON_CODE_FW_EXCEPTION_FATAL to all the PF’s/VF’s that
chimp is dead and it is going to reset the chimp.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Periodically poll the FW heartbeat register and FW recovery counter
registers to check the FW health. Polling frequency will be
advertised by the FW in HWRM_ERROR_RECOVERY_QCFG response.
Schedule the task upon receiving the async event from FW.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
1. Advertise HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_ERROR_RECOVERY_SUPPORT flag
in the FUNC_DRV_RGTR command.
2. request for the async event ASYNC_EVENT_CMPL_EVENT_ID_ERROR_RECOVERY
in the FUNC_DRV_RGTR command.
3. handle the async event EVENT_ID_ERROR_RECOVERY from FW.
Error recovery support will be used by firmware only if all the driver
instances support error recovery process.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
HWRM_ERROR_RECOVERY_QCFG command returns the FW status registers offset
for periodic firmware health check monitoring. Map them to GRC window 2.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
In Driver initiated error recovery process, driver has to know about
the registers offset and values to initiate FW reset. The HWRM command
HWRM_ERROR_RECOVERY_QCFG is used to obtain all the registers and values
required to initiate FW reset. This command response includes
FW heart_beat register, health status register, Error counter register,
register offsets and values to do chip reset if firmware crashes and
becomes unresponsive.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
When firmware hit some unrecoverable error conditions, firmware initiate
the recovery by sending an async event EVENT_CMPL_EVENT_ID_RESET_NOTIFY
with data1 set to RESET_NOTIFY_EVENT_DATA1_REASON_CODE_FW_EXCEPTION_FATAL
to all host drivers and will reset the chip.
The recovery procedure is same sequence as the one for hot FW upgrade.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Use latest firmware API to inform firmware about IF state changes.
Firmware has the option to clean up resources during IF down and
to require the driver to reserve resources again during IF up.
During port start, HWRM_FUNC_DRV_IF_CHANGE command response
flags indicates that firmware has reset. Add logic to re-probe
the firmware and re-setup resources.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
When the FW upgrade is initiated the current instance
of FW issues a HWRM_ASYNC_EVENT_CMPL_EVENT_ID_RESET_NOTIFY
async notification to the driver. On receiving this notification,
the PMD shall quiesce itself and poll on the HWRM_VER_GET FW
command at regular intervals.
Once the VER_GET command succeeds, the driver should go through
the rediscovery process and re-initialize the device.
Also register with FW for the reset notify async event.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Refactor init and uninit functions so that the driver can fail
the eth_dev_ops callbacks and accessing Tx and Rx queues
when device is in reset or in error state.
Transmit and receive queues are freed during reset cleanup and
reallocated during recovery. So we block all data path handling
in this state. The eth_dev dev_started field is updated depending
on the status of the device.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
This patch adds new FW reset HWRM command.
Code using this command will be added in future patch.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The devices backed by mlx5 PMD might share the same multiport
Infiniband device context. It regards representors and slaves
of bonding device. These ports are spawned with devargs.
These patch check whether configuration deduced from these
devargs is compatible with configurations if devices
sharing the same context. It prevents the incorrect
whitelists, like:
-w 82:00.0,representor=0,dv_flow_en=1
-w 82:00.0,representor=1,dv_flow_en=0
The representors with indices [0-1] are supposed to spawned
over the same PCi device, but there is dv_flow_en parameter
mismatch.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
With bonding configuration multiple PFs may represent the
single switching device with multiple ports as representors.
To distinguish representors belonging to different PFs we
should generated unique port ID. It is proposed to use
the PF index in bonding configuration to generate this
unique port IDs.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
With bonding configurations the switch domain may be shared
between multiple PCI devices, we should search the switch
sibling devices within the entire set of present ethernet
devices backed by the mlx5 PMD.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
There new kernel/rdma_core [1] supports matching on metadata
register instead of vport field to provide operations over
VF LAG bonding configurations. This patch provides correct
translations for flow matchers and destination port actions
if united E-Switch (for VF LAG) is configured and/or new vport
matching mode is engaged.
[1] http://patchwork.ozlabs.org/cover/1122170/
"Mellanox, mlx5 vport metadata matching"
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The routine mlx5_port_to_eswitch_info() is elaborated
to two ones (get E-Switch port parameters by port and
by device pointer) and simplified to returning structure
containing all parameters instead of copying.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
There new kernel/rdma_core [1] supports matching on metadata
register instead of vport field to provide operations over
VF LAG bonding configurations. The patch retrieves parameters
and information about the way is engaged to match vport on E-Switch.
[1] http://patchwork.ozlabs.org/cover/1122170/
"Mellanox, mlx5 vport metadata matching"
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
If bonding Infiniband device is found the unified E-Switch
is supposed and the extra rdma-core/kernel support is needed
to retrieve vport indices. The patch introduces this feature
defines, bonding support check is added to probe routine.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
If device is VF LAG bonding one the port name includes
the bonding Infiniband device name and looks like:
82:00.0_mlx5_bond_0 - for master device port PF0
82:00.1_mlx5_bond_0_representor_5 - for representor
VF5 over PF1
where bonding Infiniband device mlx5_bond_0 controls
the 82:00.0 as PF0 and 82:00.1 as PF1 PCI functions.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The Mellanox NICs starting from ConnectX-5 support LAG over
NIC ports internally, implemented by the NIC firmware and hardware.
The multiport NIC presents multiple physical PCI functions (PF),
with SR-IOV multiple virtual PCI functions (VFs) might be presented.
With switchdev mode the VF representors are engaged and PFs and their
VFs are connected by internal E-Switch feature. Each PF and related VFs
have dedicated E-Switch and belong to dedicated switch domain.
If NIC ports are combined to support NIC the kernel drivers introduce
the single unified Infiniband multiport devices, and all only one
unified E-Switch with single switch domain combines master PF
all all VFs. No extra DPDK bonding device is needed.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
At device probing the device list to spawn was allocated
as dynamic size local variable. It was no possible to have
one unified exit point from routine due to compiler warnings.
This patch allocates the spawn device list directly with
rte_zmalloc() and it is possible to goto to unified exit
label from anywhere of the routine.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The routine mlx5_ibv_device_to_pci_addr() takes Infiniband
device list object, takes the device sysfs path from there
and retrieves PCI address. The routine may be implemented
in more generic way by taking sysfs path directly as parameter
and can be used for getting PCI address of netdevs.
The generic routine is renamed to mlx5_dev_to_pci_addr()
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Now all devices created over the same multiport IB device
have shared context containing the backing PCI device field.
For the VF LAG configurations it becomes possible the
representors might be connected to VF created over different
PFs. In this case representors have the different backing
PCI devices and mentioned field should be moved to device
private area.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Probe for the PCI ID of a new mode of VF which will be added to VIC
adapter firmware. When fully implemented, the new mode will operate
independent of the Cisco Virtual Machine Fabric Extender (VM-FEX) and
will not need to be provisioned through libvirt. The new mode is dubbed
"Standalone vNic" mode or "SN" mode.
Also, minor formatting changes.
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Hyong Youb Kim <hyonkim@cisco.com>
Packet processing in secondary process cannot work because rx_pkt_burst
and tx_pkt_burst in eth_dev are not initialized while probing device.
This patch is to the initialization.
Fixes: ee27edbe0c ("drivers/net: share vdev data to secondary process")
Cc: stable@dpdk.org
Signed-off-by: Yasufumi Ogawa <yasufum.o@gmail.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The generic RTE_LOGTYPE_PMD is a historical relic and should
not be used. Every driver must dynamic log types.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The generic RTE_LOGTYPE_PMD is a historical relic and should
not be used. Every driver must dynamic log types.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The generic RTE_LOGTYPE_PMD is a historical relic and should
not be used. Every driver must dynamic log types.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The generic RTE_LOGTYPE_PMD is a historical relic and should
not be used. Every driver must dynamic log types.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The generic RTE_LOGTYPE_PMD is a historical relic and should
not be used. Every driver must dynamic log types.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The generic RTE_LOGTYPE_PMD is a historical relic and should
not be used. Every driver should register the logtypes
for itself.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
slave aggregator_port_id is in [0, RTE_MAX_ETHPORTS-1] range.
If RTE_MAX_ETHPORTS is > 8, we can hit out of bound accesses on
agg_bandwidth[] and agg_count[] arrays.
Fixes: 6d72657ce3 ("net/bonding: add other aggregator modes")
Cc: stable@dpdk.org
Signed-off-by: Hui Zhao <zhaohui8@huawei.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Chas Williams <chas3@att.com>
mode_bond_id and mode_band_id are slave ids, stored on 16bits.
Fixes: f8244c6399 ("ethdev: increase port id range")
Cc: stable@dpdk.org
Signed-off-by: Hui Zhao <zhaohui8@huawei.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
During PF/VF link update, a default speed value of 100M will be set
if get_link_info has failed or speed is unknown.
Consequently if PF is put in no-carrier state, VFs will switch to
"in carrier" state due to a link up + a link speed set to 100M
(default value if no speed detected).
To be consistent with linux drivers on which PF and VFs are in
same carrier state, sets default speed to undefined (instead of 100M)
and updates a link status of VF only if link is up and speed is
different from undefined.
Fixes: 4861cde461 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Laurent Hardy <laurent.hardy@6wind.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The speed capability of X553 1GbE should be ETH_LINK_SPEED_1G |
ETH_LINK_SPEED_100M | ETH_LINK_SPEED_10M rather than ETH_LINK_SPEED_1G |
ETH_LINK_SPEED_10G. Correct it to fix the issue.
Fixes: e274f57322 ("ethdev: add speed capabilities")
Cc: stable@dpdk.org
Signed-off-by: Xiao Zhang <xiao.zhang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Add support for setting VLAN PCP field via rte_flow API. Hardware
overwrites the entire 16-bit VLAN TCI field. So, both VLAN VID and
PCP actions must be specified.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add support for matching VLAN fields via rte_flow API.
When matching VLAN pattern, the ethertype field in hardware
filter specification must contain VLAN header's ethertype, and
not Ethernet header's ethertype. The hardware automatically
searches for ethertype 0x8100 in Ethernet header, when
parsing incoming packet against VLAN pattern.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Remove compile time option to control Tx coalescing Latency vs
Throughput behavior. Add tx_mode_latency devarg instead, to
dynamically control Tx coalescing behavior.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Remove compile time flags and use dynamic logging for debug prints.
Also remove rarely used debug logs in register access and datapath.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Link updates come in firmware event queue, which is only created
when device starts. So, don't poll for link status if firmware
event queue is not yet created.
This fixes NULL dereference when accessing non existent firmware
event queue.
Fixes: 265af08e75 ("net/cxgbe: add link up and down ops")
Cc: stable@dpdk.org
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Set VLAN action mode to VLAN_REWRITE only if VLAN_INSERT has not been
set yet. Otherwise, the resulting VLAN packets will have their VLAN
header rewritten, instead of pushing a new outer VLAN header.
Also fix the VLAN ID extraction logic and endianness issues.
Fixes: 1decc62b1c ("net/cxgbe: add flow operations to offload VLAN actions")
Cc: stable@dpdk.org
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
To avoid name collisions, add cxgbe_ prefix to some global functions.
Also, make some local functions static in cxgbe_filter.c.
Fixes: ee61f5113b ("net/cxgbe: parse and validate flows")
Fixes: 9eb2c9a480 ("net/cxgbe: implement flow create operation")
Fixes: 3a381a4116 ("net/cxgbe: query firmware for HASH filter resources")
Fixes: af44a57798 ("net/cxgbe: support to offload flows to HASH region")
Fixes: 41dc98b082 ("net/cxgbe: support to delete flows in HASH region")
Fixes: 23af667f15 ("net/cxgbe: add API to program hardware layer 2 table")
Cc: stable@dpdk.org
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
The PCI virtual function type was not recognized correctly
for ConnectX-6 VF.
Fixes: f0354d8423 ("net/mlx5: add ConnectX-6 device IDs")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The PCI virtual function type was not recognized correctly
for BlueField VF.
Fixes: f38c54571d ("net/mlx5: split PCI from generic probing")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
In the process of recovery from error CQE, when using vectorized Rx
burst, the initialization of data length in mbufs was not done.
As a result the wrong length was left written in mbuf, causing
memory overwrite or wrong error report.
This patch fixes the initialization of mbuf data length during
recovery from error CQE, when using vectorized Rx burst,
Fixes: 88c0733535 ("net/mlx5: extend Rx completion with error handling")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The txq_uar_init() routine uses the uninitialized uar_mmap_offset
field in 32-bit configurations due to this field is initialized
after txq_uar_init() call.
Fixes: 120dc4a7dc ("net/mlx5: remove device register remap")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
TSO (TCP Segmentation Offload) is enabled by default on vhost.
Add the ability to disable TSO on vhost.
The user should also disable the feature on the virtual machine's xml.
Signed-off-by: Noa Ezra <noae@mellanox.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Matan Azrad <matan@mellanox.com>
If reserve virtio header room by function rte_pktmbuf_prepend, both
segment data length and packet length of mbuf will be increased.
Data length will be equal to descriptor length, while packet length
should be decreased as virtio-net header won't be taken into packet.
Thus will cause mismatch in mbuf structure. Fix this issue by access
mbuf data directly and increase descriptor length if it is needed.
Fixes: 58169a9c81 ("net/virtio: support Tx checksum offload")
Fixes: 892dc798fa ("net/virtio: implement Tx path for packed queues")
Fixes: 4905ed3a52 ("net/virtio: optimize Tx enqueue for packed ring")
Fixes: e5f456a98d ("net/virtio: support in-order Rx and Tx")
Cc: stable@dpdk.org
Reported-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The loop to read packets does not take all packets as the number of
available packets (nb_used) is decremented in the loop.
Take all available packets provides a performance improvement of 3%.
Fixes: fc3d66212f ("virtio: add vector Rx")
Cc: stable@dpdk.org
Signed-off-by: Thibaut Collet <thibaut.collet@6wind.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
With vectorized functions, only the rx stats for number of packets is
incremented.
Update also the other statistics.
Performance impact is about 2%
Fixes: fc3d66212f ("virtio: add vector Rx")
Cc: stable@dpdk.org
Signed-off-by: Thibaut Collet <thibaut.collet@6wind.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Check whether space are enough before burst enqueue operation. If more
space is needed, will try to clean up used descriptors for space on
demand. It can give more chances to free used descriptors, thus will
help RFC2544 performance. Also deduct failed xmit packets from total
xmit number.
Fixes: e5f456a98d ("net/virtio: support in-order Rx and Tx")
Cc: stable@dpdk.org
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
When doing xmit in-order enqueue, packets are buffered and then flushed
into avail ring. Buffered packets can be dropped due to insufficient
space. Moving stats update action just after successful avail ring
updates can guarantee correctness.
Fixes: e5f456a98d ("net/virtio: support in-order Rx and Tx")
Cc: stable@dpdk.org
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
In some situations, when a virtual machine is starting,
vring_state_changed can be called while there was no change in the
queue state. This fix makes sure that there was really a change in the
queue state before calling the callback for EVENT_QUEUE_STATE.
Fixes: ee584e9710 ("vhost: add driver on top of the library")
Cc: stable@dpdk.org
Signed-off-by: Noa Ezra <noae@mellanox.com>
Reviewed-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Set RTE_ETH_DEV_CLOSE_REMOVE upon probe so all the private resources
for the port can be freed by rte_eth_dev_close().
Signed-off-by: Chenxu Di <chenxux.di@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Set RTE_ETH_DEV_CLOSE_REMOVE upon probe so all the private resources
for the port can be freed by rte_eth_dev_close().
Signed-off-by: Chenxu Di <chenxux.di@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Set RTE_ETH_DEV_CLOSE_REMOVE upon probe so all the private resources
for the port can be freed by rte_eth_dev_close().
Signed-off-by: Chenxu Di <chenxux.di@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Set RTE_ETH_DEV_CLOSE_REMOVE upon probe so all the private resources
for the port can be freed by rte_eth_dev_close().
Signed-off-by: Chenxu Di <chenxux.di@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Set RTE_ETH_DEV_CLOSE_REMOVE upon probe so all the private resources
for the port can be freed by rte_eth_dev_close().
Signed-off-by: Chenxu Di <chenxux.di@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
This patch adds multiple process support for hns3 PMD driver.
Multi-process support selection queue by configuring RSS or
flow director. The primary process supports various management
ops, and the secondary process only supports queries ops.
The primary process notifies the secondary processes to start
or stop tranceiver.
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Min Wang (Jushui) <wangmin3@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds reset related process for hns3 PMD driver.
The following three scenarios will trigger the reset process,
and the driver settings will be restored after the reset is
successful:
1. Receive a reset interrupt
2. PF receives a hardware error interrupt
3. VF is notified by PF to reset
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds stats_get, stats_reset, xstats_get, xstats_get_names
xstats_reset, xstats_get_by_id and xstats_get_names_by_id related
function codes.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds abnormal interrupt process for hns3 PMD driver,
the interrupt reported by NIC hardware.
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds get_reg related function codes for hns3 PMD driver.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds queue related operation, package sending and
receiving function codes.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Min Wang (Jushui) <wangmin3@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds support for hns3 VF PMD driver.
In current version, we only support VF device is bound to vfio_pci or
igb_uio and then driven by DPDK driver when PF is driven by kernel mode
hns3 ethdev driver, VF is not supported when PF is driven by DPDK
driver.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Chengchang Tang <tangchengchang@hisilicon.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds support for mailbox of hns3 PMD driver, mailbox is
used for communication between PF and VF driver.
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds support for vlan related operation of hns3 PMD driver.
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds support for MAC PAUSE flow control and priority flow
control(PFC).
MAC PAUSE flow control features:
All user priorities(up) are mapped to tc0. It supports settings of flow
mode and pause time.
DCB features:
Up can be mapped to other tc driver permits according to business
requirement. We can config DCB information and enable PFC by
rte_eth_dev_configure interface. Besides, enabling flow control of a
priority is supported by rte_eth_dev_priority_flow_ctrl_set interface.
we can also set flow mode and pause time by
rte_eth_dev_priority_flow_ctrl_set. we do not support manual setting of
ETS, but driver equally distributes bandwidth for each tc according to
number of used tc.
In addition, flow control function by default is turned off to ensure
that app startup state is the same each time.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds support for RSS of hns3 PMD driver. It included the
follow functions:
In file hns3_rss.c:
1) Set/query hash key, rss_hf by .rss_hash_update/.rss_hash_conf_get ops
callback functions.
2) Set/query redirection table by .reta_update/.reta_query. ops callback
functions.
3) Set/query hash algorithm by .filter_ctrl ops callback function when
the 'filter_type' is RTE_ETH_FILTER_HASH.
In file hns3_flow.c:
1) Set hash key, rss_hf, redirection table and algorithm by .create ops
callback function.
2) Disable RSS by .destroy or .flush ops callback function.
3) Check the effectiveness of the RSS's configuration by .validate ops
callback function.
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds support for rte_flow_ops operation and flow
director of hns3 PMD driver.
Flow director feature is only supported in hns3 PF driver.
It supports the network L2\L3\L4 and tunnel packet creation,
deletion, flushing, and querying hit statistics.
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds the following operations defined in struct eth_dev_ops:
mtu_set, infos_get and fw_version_get for hns3 PMD driver.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds the following mac address related operations defined in
struct eth_dev_ops: mac_addr_add, mac_addr_remove, mac_addr_set
and set_mc_addr_list.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds the initialization of hns3 PF PMD driver. It gets
configuration from IMP such as queue information, configures queue,
inits mac, inits manage table, disables gro etc.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds support for cmd of hns3 PMD driver, driver can interact
with firmware through command to complete hardware configuration.
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch registers hns3 PMD driver and adds the definition for log
interfaces.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds some data structure definitions, macro definitions and
inline functions for hns3 PMD drivers.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Set up MTU to the minimum among Tx MTU, Rx MTU and
IPN3KE_MAC_FRAME_SIZE_MAX.
Signed-off-by: Andy Pei <andy.pei@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Since now the ice PMD only handles Rx Flex descriptor, so remove the
legacy descriptor definition.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Switch to Rx flexible descriptor format instead of legacy
descriptor format.
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
With this path, the flexible descriptor is supported
in SSE path. And the legacy descriptor is not supported.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The ice has the feature to extract protocol fields into flex descriptor
by programming per queue. Currently, the ice PMD will put the protocol
fields into rte_mbuf::udata64 with different type format. Application
can access the protocol fields quickly.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Set the RXDID with flex descriptor type by default, change the Rx
function to support new descriptor handling.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The Rx flex descriptor has 16B and 32B size, with different
field definitions compared to legacy type.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
PF driver supports counting VF adminQ messages. If any VF driver
sends much more adminQ messages to its PF driver in a period of
time, it will trigger the PF's message limitation, then in the
next certain amount of seconds the PF driver will ignore any new
adminQ message from that VF.
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Remove unused code.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Add support for IPv6 traffic class (tc) field for switch rule.
Correct ice_ipv6_hdr based on the IPv6 Protocol using bitfields.
Add big/little endian convert for tc field before it is inserted,
since tc is only one byte and also does not have a byte-aligned
offset.
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Before this patch, IPv4 and UDP inner hash rule will be over
written by later rules after RSS initialization phase. This is
because the PTYPE bitmap table cover some PTYPEs belong to another
PTGs. And some PTYPEs are reserved. Remove these PTYPEs in TCP,
UDP, SCTP and ipv4 bitmap table.
Fixes: aa1cd410fa ("net/ice/base: add flow module")
Signed-off-by: Zhirun Yan <zhirun.yan@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
As title says, fix an alignment issue.
Fixes: 51d04e4933 ("net/ice/base: add flexible pipeline module")
Cc: stable@dpdk.org
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
ice_cp_bitmap() already exists and should be used instead of
using ice_memcpy(). Note, there are a couple comments that suggest
using a bitmap-specific copy function, but those are not correct
since the source block of memory is not a bitmap.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Remove the error log message when attempting to download a
package that has an unsupported version.
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Add two bytes to meet the requirement of 4 bytes alignment for dummy
packet for creating switch rule for PPPoE.
Fixes: d1c2f76b44 ("net/ice/base: support GTP and PPPoE protocols")
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Previously, switch code would use only pre-reserved index
slots at the end of each field vector for recipe result index
locations. This patch adds code that detects other internal
empty index slots that could potentially be used. For each
recipe that is added, a determ ination is made as to whether
any of these additional index slots alige with all the profiles
selected for the recipe; if alignment is achieved, then these
result index slots can be used.
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Macros no longer be used and can be removed
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Before this patch, RSS tunneled rules can not be destroyed at runtime.
This is because it can not find the existing matching profile for tunnels.
segs[0] should always be zero and all matched, segs[1] for inner part.
It only construct one segment.
This patch modifies construct segment in ice_rem_rss_cfg_sync() to
match ice_add_rss_cfg_sync().
Fixes: b7d34ccc47 ("net/ice/base: packet encapsulation for RSS")
Signed-off-by: Zhirun Yan <zhirun.yan@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Before this patch, if set rule for IPv4 first and then set rule
for TCP with IPv4. The first rule for inner IP will be overwritten
by TCP rule. This is because MAC_IPV6_TUN_MAC_IPV4_PAY using the
same ptgs PTG_TUN_INNER_IPV4_OTHER with MAC_IPV4_TUN_MAC_IPV4_PAY,
this ptype should not in TCP bitmap.
Remove this bit in TCP bitmap.
Fixes: aa1cd410fa ("net/ice/base: add flow module")
Cc: stable@dpdk.org
Signed-off-by: Zhirun Yan <zhirun.yan@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Add GTPU qfi field support for flow director. Note that for GTPU pkt,
only qfi field (6 bits) can be set for FD. The supported GTPU pkts are
defined as:
ICE_FLTR_PTYPE_NONF_IPV4_GTPU_IPV4_UDP,
ICE_FLTR_PTYPE_NONF_IPV4_GTPU_IPV4_TCP,
ICE_FLTR_PTYPE_NONF_IPV4_GTPU_IPV4_ICMP,
ICE_FLTR_PTYPE_NONF_IPV4_GTPU_IPV4_OTHER (FRAG and PAY belong to this)
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
ice_memdup() is preferred over an alloc immediately followed by a copy.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Add parameter "symm" to rss configuration APIs.
When symm is 1, Symmetric Teoplitz Hash can be enabled by
configuring GLQF_HSYMM properly.
NOTE:
Symmetric Teoplitz hash will work only if hash schema of
VSIQF_HASH_CTL be configured to 01b and it is assumed be enabled
in PMD.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Update FW API minor version to align to current value advertised
by FW in NVM images.
Signed-off-by: Kevin Scott <kevin.c.scott@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Add dest MAC address support so that this field can be matched when
we set Flow Director filter with dst addr for MAC.
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Enable getting value from input to set up flow director counters,
so that the FDIR counters can count none, packets only, bytes only
or both packets and bytes as demanded.
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Add fdir queue region support.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Add two ptypes(MAC_PPPOE_IPV4_SCTP and MAC_PPPOE_IPV6_SCTP) in
sctp ptype bitmap to enable rss.
Signed-off-by: Zhirun Yan <zhirun.yan@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Properly associate switch recipes to profiles. Previous code was
using the wrong bitfield for updating the associations, which was
causing other PFs to not properly identify and use existing
recipes. This sometimes resulted in rules not being added when it
should have been possible.
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
When declaring the ice_prot_ext, and ice_prot_id_tbl structure,
we can use a fixed length array instead of a variable length one
which helps us catch future code changes that might desynchronize
the enum ice_protocol_type and the structs. This change also
necessitates removing the last member of the structs which was
just there to be a placeholder.
Also reorder the ice_prot_ext struct to match the ordering in the
associated enum ice_protocol_type.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Add support for switch rule about single-VLAN-PPPoE. Note that double
VLAN is not supported by the hardware at this point, therefore only
single-VLAN support for PPPoE is added.
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
The DPDK PF doesn't support SRIOV so remove the related iavf host
code.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
The code in ice_sched_cleanup_all checks whether the port info is NULL
prior to calling ice_sched_clear_port.
More importantly, it also checks whether the port structure has been
initialized by checking its port_state field as well.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
There could be an error returned from ice_fill_adv_dummy_packet()
so we need to propagate that to the caller. Additionally, the
call to ice_flow_xtract_pkt_flags() could also return an error so
we need to propagate it as well.
Also add in the correct offsets for GENEVE and VXLAN_GPE to the
dummy packets.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Before this patch, the logic of protocol header checking only support
non-tunneled packet. This patch remove the inner protocol in L3/L4 RSS
seg hdr mask and change the protocol header validation to reflect this.
So, for ice_add_rss_cfg(), the last parameter addl_hdrs could specify
the protocol header for tunnel.
Signed-off-by: Zhirun Yan <zhirun.yan@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Add non-word aligned field support for IPv6 with hlim, tc and proto.
All these fields are one byte within one word. In order to match
bytes within the IPv6 header for flow director we need to use a mask.
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Add non-word aligned field support for ipv4 with ttl, tos and proto.
All these fields are one byte within one word. In order to match
bytes within the IPv4 header for flow director we need to use a mask.
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Add VXLAN tunnel training packets to flow director and change the
interface to support tunnel packets.
Signed-off-by: Henry Tieman <henry.w.tieman@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Remove redundant empty lines
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Enabling/disabling of allmulticast mode is not always successful and
it should be taken into account to be able to handle it properly.
When correct return status is unclear from driver code, -EAGAIN is used.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
rte_eth_allmulticast_enable()/rte_eth_allmulticast_disable() return
value was changed from void to int, so this patch modify usage
of these functions across net/bonding
according to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
rte_eth_allmulticast_enable()/rte_eth_allmulticast_disable() return
value was changed from void to int, so this patch modify usage
of these functions across net/failsafe according to new return type.
Try to keep all-multicast mode consistent across all active
devices in the case of failure.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Change rte_eth_dev_owner_delete() return value from void to int
and return negative errno values in case of error conditions.
Right now there is only one error case for rte_eth_dev_owner_delete() -
invalid owner, but it still makes sense to return error to catch bugs
in the code which uses the function.
Also update the usage of the function in drivers/netvsc
according to the new return type.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The return value of rte_eth_link_get() was changed from void to int.
Update the usage of the function according to the new return type.
Just log error if something goes wrong.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The return value of rte_eth_link_get() and rte_eth_link_get_nowait()
was changed from void to int. Update the usage of the functions
according to the new return type.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The return value of rte_eth_link_get() and rte_eth_link_get_nowait()
was changed from void to int. Update the usage of the functions
according to the new return type.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Change rte_eth_link_get() and rte_eth_link_get_nowait() return value
from void to int and return negative errno values in case of error
conditions.
Return value of link_update callback is ignored since the callback
returns not errors but whether link up status has changed or not.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Fix the issue that the link speed of the bond device was set to the
link speed of the first active slave in broadcast mode.
Set the link speed of the bond device to the minimum value across
all of the slaves in that case.
Fixes: deba8a2f8b ("net/bonding: fix link properties management")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Chas Williams <chas3@att.com>
