The phys_addr concept is deprecated in rte_memzone, change it to access
iova member, and use the type 'rte_iova_t'.
Also rename the rx/tx_ring_phys_addr definitions to rx/tx_ring_dma that
matches the IOVA concept design.
Fixes: 50370662b7 ("net/ice: support device and queue ops")
Cc: stable@dpdk.org
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When OS package is not provided driver silently goes into safe mode,
since safe mode is missing most of advanced features, this may confuse
the users.
Instead of going into safe mode silently, add devarg for safe mode
enabling only for users that are asking for it.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Ray Kinsella <ray.kinsella@intel.com>
Remove devarg "max_queue_pair_num" related code since
it is not complete implemented.
Fixes: f9cf4f8641 ("net/ice: support device initialization")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Replace rte_intr_enable() with rte_intr_ack() API
for acking an interrupt in interrupt handlers and
rx_queue_intr_enable() callbacks of PMD's.
This is inline with original intent of this change in PMDs
to ack interrupts after handling is completed if
device is backed by UIO, IGB_UIO or VFIO(with INTx).
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Shahed Shaikh <shshaikh@marvell.com>
Tested-by: Shahed Shaikh <shshaikh@marvell.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
The incriminated commit broke the use of RTE_PCI_DRV_IOVA_AS_VA which
was intended to mean "driver only supports VA" but had been understood
as "driver supports both PA and VA" by most net drivers and used to let
dpdk processes to run as non root (which do not have access to physical
addresses on recent kernels).
The check on physical addresses actually closed the gap for those
drivers. We don't need to mark them with RTE_PCI_DRV_IOVA_AS_VA and this
flag can retain its intended meaning.
Document explicitly its meaning.
We can check that a driver requirement wrt to IOVA mode is fulfilled
before trying to probe a device.
Finally, document the heuristic used to select the IOVA mode and hope
that we won't break it again.
Fixes: 703458e19c ("bus/pci: consider only usable devices for IOVA mode")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Tested-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
This patch adds ice_flow_create, ice_flow_destroy,
ice_flow_flush and ice_flow_validate support,
these are used to handle all the generic filters.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The patch enables the backend of rte_flow. It transfers
rte_flow_xxx to device specific data structure and
configures packet process engine's binary classifier
(switch) properly.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The offset for the inner L2 header in the dummy GRE packet
was off by 2 bytes so updated the offset.
Fixes: 839c0a4b77 ("net/ice/base: enable additional switch rules")
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add protocol definitions for ethertype.
Add ice_ethtype_hdr structure definition into the ice_prot_hdr union.
Add ethtype offsets into the training packet maps.
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Tested-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
- Add IPv6 switch rule support.
- Add IPv6 training packet.
- Correct name of IPv6 header variable.
- Fix enum values so that they point to the proper
ice_prot_ext_tbl_entry field.
Signed-off-by: Kevin Scott <kevin.c.scott@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The default policy for offload-specific fields is that
they are undefined unless the corresponding offloads are
requested in mbuf ol_flags. This is also the case for outer
L2 and L3 length fields which must not be assumed to contain
zeros for non-tunnel packets. The patch clarifies this behaviour
in the comments and also adds appropriate checks to the PMDs which
do not check any tunnel-related offloads before using the said fields.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
If we don't clear mac_addrs, ethdev will double free it on cleanup.
Fixes: e16adf08e5 ("ethdev: free all common data when releasing port")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add internal usage flag, bit 91 as described in spec.
Update width of internal queue state to 122 also as described in spec.
Signed-off-by: Ashish Shah <ashish.n.shah@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
- Add function to remove ES profile map as it is now being used in
clearing and freeing HW tables.
- Locks were initially not used for releasing ES profile maps and
flow profiles as the sequence is part of driver unload. Adding
calls to acquire and release locks to ensure that any calls made
by the VF VSI during VFR or unload do not result in memory
access violations.
Signed-off-by: Vignesh Sridhar <vignesh.sridhar@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
According to recent specification versions, the field in the Queue
Shutdown AdminQ command consisting of the "driver unloading" indication
is not a 4 byte field (it is byte.bit 16.0). Change it to a byte and
remove the unnecessary endian conversion.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Added refresh_required flag to determine if we need to update the
recipe to profile mapping cache. This will reduce the number of
calls made to refresh the profile map.
Signed-off-by: Shivanshu Shukla <shivanshu.shukla@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Correct NVGRE header structure and its field offsets.
Fixes: 04b8ec1ea8 ("net/ice/base: add protocol structures and defines")
Cc: stable@dpdk.org
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
A couple of places in the code use a 'sizeof(bitmap) * BITS_PER_BYTE'
construction to calculate the size of the bitmap when calling
ice_zero_bitmap. Instead of doing this, just use the same value as in
the ice_declare_bitmap declaration.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
A few places in the code used ice_memset instead of ice_zero_bitmap to
initialize a bitmap to zeros.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Fix ice_cp_bitmap to copy the entire storage.
Fixes: c9e37832c9 ("net/ice/base: rework on bit ops")
Cc: stable@dpdk.org
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Fix ice_zero_bitmap to zero the entire storage.
Fixes: c9e37832c9 ("net/ice/base: rework on bit ops")
Cc: stable@dpdk.org
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
In CEE mode, the TSA information can be derived from the reported
priority value.
Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
While calling ice_find_recp we were calling ice_get_recp_to_prof_map
every time we called ice_find_recp. ice_get_recp_to_prof_map is a very
expensive operation and we should try to reduce the number of times we
call this function. So moved it into ice_get_recp_frm_fw since we only
need to have fresh recp_to_profile mapping when we we check FW to see if
the recipe we are trying to add already exists in FW.
Signed-off-by: Shivanshu Shukla <shivanshu.shukla@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Enable forward to Q group action in ice_add_adv_rule.
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add capability to create inner IP and inner TCP switch recipes and
rules. Change UDP tunnel dummy packet to accommodate the training of
these new rules.
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
1. Add defines for Link Topology Netlist Section.
2. Add missing Read MAC command response bits.
3. Adds AQ error 29.
Signed-off-by: Jacek Naczyk <jacek.naczyk@intel.com>
Signed-off-by: Lev Faerman <lev.faerman@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Refactored VSI node sched code to use port_info ptr as call arg.
The declaration of VSI node getter function has been modified to use
pointer to ice_port_info structure instead of pointer to hw structure.
This way suitable port_info structure is used to find VSI node.
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Make functions that can be, static. Remove some code that is not
currently called.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Cleanup the useless code.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
use __ALWAYS_UNUSED to mark function parameters unused to replace
__always_unused marker.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Introduce some more new macros, like ICE_VSI_LB and the like.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
In the function ice_add_eth_mac(), there is a line that
hard-codes the filter info flag to TX. This is redundant
and inaccurate. That flag will be set by the calling
function that built the list of filters to add, and
hard-coding it eliminates the Rx functionality of this
code. The paired function ice_remove_eth_mac() does not
do this, making a mis-matched pair.
Fixes: 157d00901f ("net/ice/base: add functions for ethertype filter")
Cc: stable@dpdk.org
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Function ice_add_rule_internal needs to call ice_create_pkt_fwd_rule
with lock held because it uses the LIST_ADD to modify the filter
rule list. It needs to be protected when modified.
Signed-off-by: Tarun Singh <tarun.k.singh@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Minor change to check if there are any RSS flow profiles to remove.
This will avoid flow profile lock acquisition and release
if the list is empty.
Signed-off-by: Vignesh Sridhar <vignesh.sridhar@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Decouple ice_dealloc_flow_entry from ice_flow_rem_entry_sync.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
In order to properly support signed packages, we always have
to send the complete buffer to firmware, regardless of any
unused space at the end. This is because the SHA hash value
is computed over the entire buffer.
Fixes: 51d04e4933 ("net/ice/base: add flexible pipeline module")
Cc: stable@dpdk.org
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Eliminate some semantic warnings, static analysis warnings.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Kevin Scott <kevin.c.scott@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Move a bunch of members around to make more efficient use of
memory, eliminating holes where possible. None of these members
are hot path so cache line alignment is not very important here.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Flow director keeps a list of VSIs for each flow type (TCP4, UDP6, etc.)
This list varies in length depending on the number of traffic classes
(ADQ). This patch uses the define of max TCs to calculate the size of
the VSI array.
Fixes: bd984f155f ("net/ice/base: support FDIR")
Cc: stable@dpdk.org
Signed-off-by: Henry Tieman <henry.w.tieman@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When the MSB is not set, the lower 11 bits do not represent bytes, but
chunks of 64 bytes. Adjust the rate limit burst size calculation
accordingly, and update the comments to indicate the way the hardware
actually works.
Fixes: 93e84b1bfc ("net/ice/base: add basic Tx scheduler")
Cc: stable@dpdk.org
Signed-off-by: Ben Shelton <benjamin.h.shelton@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
1. Using the UDP-IL PTYPEs when processing packet segments as it
contains all PTYPEs with UDP and allow packets to be forwarded to
associated VSIs as switch rules are based on outer IPs.
2. Add PTYPE 0x088 to TCP PTYPE bitmap list.
Signed-off-by: Vignesh Sridhar <vignesh.sridhar@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Function ice_fdir_is_dup_fltr tests if new Flow Director rule
is not a duplicate.
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch implements persistent, across reboots, start and stop
of LLDP agent. Added additional function parameter to
ice_aq_start_lldp and ice_aq_stop_lldp.
Signed-off-by: Jaroslaw Ilgiewicz <jaroslaw.ilgiewicz@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Modify ice_stat_update40 to use rd64 instead of two calls to rd32.
Additionally, drop the now unnecessary hireg function parameter.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add function support for rd64.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
1. Do not unnecessarily initialize local variable.
2. Cleanup ice_update_link_info.
3. Don't clear auto_fec bit in ice_cfg_phy_fec.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
To make sure that we don't reuse the same result index
which is already in use, for chaining some other recipe.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
With the current NVM, after GLOBR, before the first link up event, FW
will return to base driver, the pacing value of 20 percents for some
reason, in the get-link-status AQ command. We then use this value as
the pacing param for the set-mac-info AQ command. As result, we are
limited to 20 percents of the available bandwidth until the first
set-mac-info AQ call after the link up event.
Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Currently we are always setting prefena to 0. This is causing the
hardware to only fetch descriptors when there are none free in the cache
for a received packet instead of prefetching when it has used the last
descriptor regardless of incoming packets.
Fix this by allowing the hardware to prefetch Rx descriptors.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Replace the use of the ICE_DBG_AQ_MSG bit when dumping firmware logging
messages with a separate distinct type ICE_DBG_FW_LOG. This is useful
so that developers may enable ICE_DBG_FW_LOG and get firmware logging
messages, without also dumping AdminQ messages at the same time.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The FDID (flow director filter ID) was not inserted into Flex Descriptor
writebacks. The data for FDID is always 0xffffffff when FDID-priority is
0 in the flow director programming descriptor.
This patch changes the FDID-priority to 1 so the FDID is available for
the Flex Descriptor. With this patch the FDID is placed into the Flex
Descriptor.
Signed-off-by: Henry Tieman <henry.w.tieman@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
On devices with more than 4 ports, the maximum number of TCs per port is
limited to 4.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch makes a change to add a "func cap" prefix when printing
function capabilities, and a "dev cap" prefix when printing device
capabilities.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add function support for hweight32.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Update the defines for ice_aqc_manage_mac_read,
ice_aqc_manage_mac_write, ice_aqc_get_phy_caps_data.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
If a VSI is not using a unicast filter or did not configure that
particular unicast filter, driver should not allow it to be removed
by the VSI.
Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Adding missing debug logs and fixing existing debug logs.
Signed-off-by: Marta Plantykow <marta.a.plantykow@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
There was a bug in the previous code which never traverses all the
children to get the first node of the requested layer.
Added a sibling head pointer to point the first node of each layer
per TC. This helps the traverse easy and quicker and also removed the
recursive, complexity of the code.
Signed-off-by: Victor Raj <victor.raj@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The ice_init_all_ctrlq and ice_shutdown_all_ctrlq functions create and
destroy the locks used to protect the send and receive process of each
control queue.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The ice_debug_cq function is only called from ice_controlq.c, and has no
other callers outside of that file. Move it and mark it static to avoid
namespace pollution.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Replace the use of the magic number 8 by BITS_PER_BYTE when calculating
the number of bits from the number of bytes.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
In order to initialize the current status of the FW logging,
the api ice_get_fw_log_cfg is added. The function retrieves
the current setting of the FW logging from HW and updates the
ice_hw structure accordingly.
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
1. Perform a check against the package version to make sure that
it will be compatible with the shared code implementation. There
will be points in time when the shared code and package will need
to be changed in lock step; the mechanism added here is meant to
deal with those situations.
2. Support package tunnel labels owned by PF. VXLAN and GENEVE
tunnel labels names in the package are changing to incorporate
the PF that owns them.
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add locking mechanism around profile map list.
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
1. Separated the calls to initialize and allocate the HW XLT tables
from call to fill table. This is to allow the ice_init_hw_tbls call
to be made prior to package download so that all HW structures are
correctly initialized. This will avoid any invalid memory references
if package download fails on unloading the driver.
2. Fill HW tables with package content after successful package download.
3. Free HW table and flow profile allocations when unloading driver.
4. Add flag in block structure to check if lists in block are
initialized. This is to avoid any NULL reference in releasing flow
profiles that may have been freed in previous calls to free tables.
Signed-off-by: Vignesh Sridhar <vignesh.sridhar@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
After the transition from cable-unplug to cable-plug events, FW will
clear the set-phy-cfg data, sent by user. Thus, we will need to
cache these info.
1. The submitted data when set-phy-cfg is called. This info will be used
later to check if FW clears out the PHY info, requested by user.
2. The FC, FEC and LinkSpeed, requested by user. This info will be used
later, by device driver, to construct the new input data for the
set-phy-cfg AQ command.
Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
1. Move the RSS list pointer and lock from the VSI context to the ice_hw
structure. This is to ensure that the RSS configurations added to the
list prior to reset and maintained until the PF is unloaded. This will
ensure that the configuration list is unaffected by VFRs that would
destroy the VSI context. This will allow the replay of RSS entries for
VF VSI, as against current method of re-adding default configurations
and also eliminates the need to re-allocate the RSS list and lock post-VFR.
2. Align RSS flow functions to the new position of the RSS list and lock.
3. Adding bitmap for flow type status.
Signed-off-by: Vignesh Sridhar <vignesh.sridhar@intel.com>
Signed-off-by: Henry Tieman <henry.w.tieman@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Adding support to remove RSS configurations added
prior to failing case in AVF.
Signed-off-by: Vignesh Sridhar <vignesh.sridhar@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Added code to save the queue bandwidth information when it is applied
and it is replayed when queue is re-enabled again. Earlier saved value
is used for replay purpose.
Added vsi_handle, tc, and q_handle argument to the ice_cfg_q_bw_lmt,
ice_cfg_q_bw_dflt_lmt.
Signed-off-by: Tarun Singh <tarun.k.singh@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch also contains ice_remove_adv_rule function to remove existing
advanced rules. It also handles the case when we have multiple VSI using
the same rule using the following helper functions:
ice_adv_rem_update_vsi_list - function to remove VS from VSI list for
advanced rules.
Signed-off-by: Shivanshu Shukla <shivanshu.shukla@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Code added to replay the advanced rule per VSI basis and remove the
advanced rule information from shared code recipe list.
Signed-off-by: Victor Raj <victor.raj@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
1. Added an interface to support adding advanced switch rules.
2. Advanced rules are provided in a form of protocol headers and values
to match in addition to actions (limited actions are current supported).
3. Retrieve field vectors for ICE configuration package to determine
extracted fields and extracted locations for recipe creation.
4. Chain multiple recipes together to match multiple protocol headers.
5. Add structure to manage the dynamic recipes.
Signed-off-by: Grishma Kotecha <grishma.kotecha@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add functions to support following admin queue commands:
1. 0x0208: allocate resource to hold a switch recipe. This is needed
when a new switch recipe needs to be created.
2. 0x0290: create a recipe with protocol header information and
other details that determine how this recipe filter work.
3. 0x0292: get details of an existing recipe.
4. 0x0291: associate a switch recipe to a profile.
Signed-off-by: Grishma Kotecha <grishma.kotecha@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add the Add Recipe (0x0290), Recipe to Profile (0x0291), Get Recipe
(0x0292) and Get Recipe to Profile (0x0293) Commands.
Signed-off-by: Lev Faerman <lev.faerman@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When a port is not cabled, but DCBx is enabled in the firmware, the
status of DCBx will be NOT_STARTED. This is a valid state for FW
enabled and should not be treated as a is_fw_lldp true automatically.
Add the code to treat NOT_STARTED as another valid state.
Fixes: 1082f78654 ("net/ice/base: support DCB")
Cc: stable@dpdk.org
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Decouple ice_cfg_lldp_mib_change from the ice_init_dcb function call.
Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Once upon a time, the ice_flow_create_xtrct_seq() function in ice_flow.c
extracted only protocol fields explicitly specified by the caller of the
ice_flow_add_prof() function via its struct ice_flow_seg_info instances.
However, to support different ingress and egress flow profiles with the
same matching criteria, it would be necessary to also match on the
packet Direction metadata. The primary reason was because there could
not be more than one HW profile with the same CDID, PTG, and VSIG. The
Direction metadata was not a parameter used to select HW profile IDs.
Thus, for ACL, the direction flag would need to be added to the
extraction sequence. This information will be use later as one criteria
for ACL scenario entry matching.
Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Copy/paste from i40e, let's align with the fix on i40e.
Fixes: a37bde5631 ("net/ice: support statistics")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
To improve code quality we want to turn on as many warnings as we can in
the DPDK code, so turn on the "unused-parameter" warning in meson builds to
match that of the make builds. To ensure correct compilation, disable the
warning selectively for driver base code that otherwise would have issues.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Since ice can support 128, 512, 2K RSS RETA size value, change the
update API to set it to resize the RSS RETA table. And by default,
use 512 to sync with ETH_RSS_RETA_SIZE_x maximum value definition.
Also the flag ICE_FLAG_RSS_AQ_CAPABLE is missed to set.
Fixes: 690175ee51 ("net/ice: support getting device information")
Fixes: ff963bfa7c ("net/ice: support RSS")
Cc: stable@dpdk.org
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Tx desc's DD status is not cleaned by NIC automatically after packets
have been transmitted until software refill a new packet during next
loop. So when tx_free_thresh + tx_rs_thresh > nb_desc, it is possible
that an outdated DD status be checked as tx_next_dd, then segment fault
happen due to free a NULL mbuf pointer.
Then patch fixes this issue by
1. try to adapt tx_rs_thresh to an aggressive tx_free_thresh.
2. queue setup fail when tx_free_thresh + tx_rs_thresh > nb_desc
Fixes: 50370662b7 ("net/ice: support device and queue ops")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This commit sets the min and max supported MTU values for ice devices
via the ice_dev_info_get() function. Min MTU supported is set to
ETHER_MIN_MTU and max mtu is calculated as the max packet length
supported minus the transport overhead.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Support link up and down functions for ice, and when stop the ice,
makes the link down also.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The last word should not cross shadow RAM boundary.
Fixes: 68a1ab82ad ("net/ice: speed up to retrieve EEPROM")
Cc: stable@dpdk.org
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch is a cleanup on comment, variable modifier, coding style.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The RX stats will increase even no packets sent, this patch fix this issue
by modifying ipackets and ibytes statistics based on vsi instead of port
to avoid statistics error.
Fixes: a37bde5631 ("net/ice: support statistics")
Cc: stable@dpdk.org
Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Fix the issues reported by Coverity check, "Null-checking
vsi suggests that it may be null, but it has already been
dereferenced on all paths leading to the check."
Coverity issue: 328509, 328519, 328523
Fixes: e0dcf94a0d ("net/ice: support VLAN ops")
Fixes: ff963bfa7c ("net/ice: support RSS")
Cc: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Rami Rosen <ramirose@gmail.com>
When device promiscuous mode has already been enabled,
should not return error if user re-enable it.
Fixes: c945e4bf90 ("net/ice: support promiscuous mode")
Cc: stable@dpdk.org
Signed-off-by: Ying A Wang <ying.a.wang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Variable "status" should be defined as "enum ice_status"
instead of "uint16_t". This patch fixes the issue.
Fixes: c945e4bf90 ("net/ice: support promiscuous mode")
Cc: stable@dpdk.org
Signed-off-by: Ying A Wang <ying.a.wang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
This patch stopped LLDP by default to avoid the statistics error.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Max frame size setup should consider double VLAN case.
Fixes: ae2bdd0219 ("net/ice: support MTU setting")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The driver must send its version information to the firmware, so
the firmware knows the driver is up. Otherwise, it will cause unexpected
OS package downloading when multiple driver instances running on the
same device.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Do a global replace of snprintf(..."%s",...) with strlcpy, adding in the
rte_string_fns.h header if needed. The function changes in this patch were
auto-generated via command:
spatch --sp-file devtools/cocci/strlcpy.cocci --dir . --in-place
and then the files edited using awk to add in the missing header:
gawk -i inplace '/include <rte_/ && ! seen { \
print "#include <rte_string_fns.h>"; seen=1} {print}'
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Device speed capability should be specified based on different PHY types
instead of a fixed value, this patch fix the issue.
Fixes: 690175ee51 ("net/ice: support getting device information")
Cc: stable@dpdk.org
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch enabled RSS for UPD/TCP/SCTP+IPV4/IPV6 packets.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
If E810 download package failed, driver need to go to safe mode.
In the safe mode, some advanced features will not be supported.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch enables package downloading to the device. The package is
to be in the /lib/firmware/intel/ice/ddp directory and named ice.pkg.
The package is shared by the kernel driver and the DPDK PMD.
There is no per device package be supported so far, all the
devices can only download the same package. This limitation will
be removed in the future.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Move all bit ops related functions from ice_osdep.h into ice_bitops.h.
Also remove the limitation that bitmap can only be 64 bits in
ice_set_bit and ice_clear_bit.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Revert the workaround for allocating TCAM and FV entries to align
with latest firmware.
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
OS package's format is changed, field vector's protocol offset size is
changed from 8 bit to 16 bit. So base code also need to align to this,
or PMD will not be able to load OS package correctly.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
1. clean flow entry's action structure after remove it.
2. initialized priority when add a new flow entry
3. remove RSS configuration before deleting the flow profile.
Fixes: aa1cd410fa ("net/ice/base: add flow module")
Fixes: 51d04e4933 ("net/ice/base: add flexible pipeline module")
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch ensure that TCAM allocations made by a newly added VSIG
that has the same characteristic list of an existing VSIG are removed.
Fixes: 51d04e4933 ("net/ice/base: add flexible pipeline module")
Signed-off-by: Vignesh Sridhar <vignesh.sridhar@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
1. Add call to replay RSS configurations
2. Add RSS configurations to end of list and not the head to avoid
inversion on replay.
Signed-off-by: Vignesh Sridhar <vignesh.sridhar@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add flow director related support base code.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add module to support DCB related features.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Improved the profile reference counting, by moving it from being
based on how many TCAM entries using the profile to how many
profile map entries are using the profile.
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Code added to check the FW recovery mode. This function will be
used by the drivers during init to check whether the FW is in
recovery mode or not. If FW is in recovery mode then the drivers
need to run in a recovery mode where it can allow only limited
operations. Link should be down, allow only certain AQ commands
etc.
Signed-off-by: Victor Raj <victor.raj@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
If there is no queue to disable, return appropriate configuration error
earlier without acquiring the lock.
Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Klocwork points out some code is unreachable in
ice_get_itr_intrl_gran and ice_ptg_find_ptype.
The patch removed the unreachable code and resolved the static
analysis reported issues.
Fixes: 51d04e4933 ("net/ice/base: add flexible pipeline module")
Fixes: 453d087cca ("net/ice/base: add common functions")
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Update copyright time to 2019.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
1. Fix some problems with filling the HW tables.
2. Fix a logic error in ice_rem_prof_from_list.
Fixes: 51d04e4933 ("net/ice/base: add flexible pipeline module")
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
If allocating a VSI to a VSIG fails the local allocations made for VSIG
profiles and change-lists will not be removed. Adding calls to free
these entries on error in VSIG management calls.
Signed-off-by: Vignesh Sridhar <vignesh.sridhar@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Profile TCAM entry removal is handled by the firmware when
freeing the resource, so the driver does not need to write these
default entries back with an update Package action.
This patch removes writing of the TCAM entry using Update Package
command when removing it, since the entry has already been freed
by firmware.
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add define for 52 byte RSS hash key size, and add struct
ice_aqc_get_set_rss_keys comments regarding setting 40 bytes and
52 byte hash key.
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Extend the functionality of the admin queue command by including
additional status and ID bits to improve link topology configuration.
Signed-off-by: Matthew Vick <matthew.vick@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
In the ice_aq_set_phy_cfg AQ command, the 16.4 bit is reserved.
This patch will make sure that this bit will never be set to 1.
Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The patch added to retrieve the queue context and update the queue
handle for lan queues.
Signed-off-by: Victor Raj <victor.raj@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Change below function as static and also relocated code line
to align with kernel driver.
ice_aq_move_sched_elems
ice_sched_get_agg_node
ice_sched_set_node_bw_lmt
ice_sched_cfg_node_bw_alloc
ice_sched_add_agg_cfg
ice_sched_rm_agg_cfg
ice_sched_move_vsi_to_agg
ice_sched_del_rl_profile
ice_sched_rm_unused_rl_prof
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Update macros for metadata and package flags.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
1. ICE_SW_LKUP_LAST need to be handled correctly in
ice_aq_alloc_free_vsi_list and ice_update_vsi_list_rule
2. ICE_SW_LKUP_ETHERTYPE_MAC need to be handled correctly in
ice_update_vsi_lkup_fltr
3. free package segment pointer during ice_deinit_hw
Fixes: c7dd159311 ("net/ice/base: add virtual switch code")
Fixes: 453d087cca ("net/ice/base: add common functions")
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
1. ice_rem_all_sw_rules_info - remove all switch rules.
2. ice_reply_all_fltr - replay all filters stored in book keeping list.
These APIs will be used when switch rule feature is enabled.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
1. ice_add_mac_with_sw_marker - add filter with software marker.
2. ice_add_mac_with_counter - add filter with counter enabled.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
1. ice_get_vsi_promisc - get promiscuous mode of give VSI.
2. ice_get_vsi_vlan_promisc - get VLAN promiscuous mode of given VSI.
PMD may use these APIs to check the real HW status, but not rely on
a software flag when something abnormal.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
1. ice_alloc_res_cntr - allocate resource counter
2. ice_free_res_cntr - free resource counter
3. ice_alloc_vlan_res_counter - allocate vlan resource counter
4. ice_free_vlan_res_counter - free vlan resource counter
These APIs will be used when try to count the number of a flow be
hit.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
1. ice_aq_get_res_alloc - get allocated resources.
2. ice_aq_get_res_descs - get allocated resource descriptors.
These APIs may help to PMD to enable some debug utilities to
dump the resource allocation status.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add API ice_remove_eth_mac and ice_add_eth_mac to support
adding / removing ethertype (or MAC) based filter rules.
PMD driver can use these APIs to enable related rte_flow rule.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Added code to allocate VSI queue contexts to save the queue specific
information like bandwidth etc.
Signed-off-by: Victor Raj <victor.raj@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add below APIs in switch module
1. ice_aq_get_vsi_params - get VSI context info
2. ice_aq_add_update_mir_rule - add/update mirror rule
3. ice_aq_delete_mir_rule - delete mirror rule
4. ice_aq_set_storm_ctrl - set storm control configuration
5. ice_aq_get_storm_ctrl - get storm control configuration
PMD can use these APIs to enable mirror rule and storm control
related features.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Remove static of below functions and declare them as external
APIs.
ice_aq_add_vsi
ice_aq_free_vsi
ice_aq_update_vsi
ice_aq_add_lan_txq
ice_init_pkg
So far the purpose is just to sync with kernel driver.
They are reserved for future use.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Remove unnecessary macro and data structure.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
For components that make a copy of an external pipeline package file
(i.e. the Linux and FreeBSD drivers), save the size of the package
file along with the copy so that both can be used when calling
ice_init_pkg() after a CORER/GLOBR reset.
Also, do not free the copy of the package file in ice_init_pkg()
since it is needed afterward for subsequent resets.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
1. Add macro ice_for_each_traffic_class to loop for each
traffic class.
2. Add macro MIN_T to wrap min with type conversion.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add two helper functions in common module.
1. ice_aq_set_mac_cfg to help configure maximum frame size with AQ
command
2. ice_get_ctx help to extract context bits from a packet structure.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Improve comments to follow naming rules.
Also the patch include some minor cleanup.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add two APIs ice_alloc_sw and ice_free_sw to support
switch related resource allocation and free.
These APIs are required when we enable switch flow.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add function pointers of buffer releasing for RX and
TX queues, for vector functions will be added for RX
and TX.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The TX setting functions is not called.
Fixes: 17c7d0f9d6 ("net/ice: support basic Rx/Tx")
Cc: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Replace ice_read_sr_word with ice_read_sr_buf in ice_get_eeprom.
Fixes: d0dd1c8e19 ("net/ice: support EEPROM information getting")
Cc: stable@dpdk.org
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
VLAN filter is required to be configured during dev_start according to
dev_conf.rxmod.offloads setting, so ice_vlan_offload_set is called to
handle this.
Fixes: 690175ee51 ("net/ice: support getting device information")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Fix segment fault when detach a device due to some redundant function
call in ice_dev_uninit.
Fixes: f9cf4f8641 ("net/ice: support device initialization")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Fix the issue that the link speed is unknown.
Fixes: 690175ee51 ("net/ice: support getting device information")
Fixes: cf911d90e3 ("net/ice: support link update")
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Enable the APIs for unicast and multicast promiscuous
mode setting.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Free flow profile entries when free HW tables.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add the module that implemented flow abstraction that base on
flexible pipeline.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The flexible pipeline module provide the infrastructure for ice's
flexible packet processing feature.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Added API ice_alloc_hw_res and ice_free_hw_res.
Added resource type macro.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Remove some unnecessary code.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch fixed Tx error and allowed untagged packets in
when vlan filter on.
Fixes: e0dcf94a0d ("net/ice: support VLAN ops")
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Fix the drvinfo dumped firmware-version when using dpdk ethtool,
change it to the same result as Linux ethtool shown info.
Fixes: e31cb9a362 ("net/ice: support FW version getting")
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When RTE_LIBRTE_MBUF_DEBUG enabled, rte_mbuf_sanity_check()
function defined in rte_mbuf.so library,
add it while linking the librte_pmd_ice.so library to fix
the build issue.
error log:
/usr/bin/ld: ice_rxtx.o: in function `ice_recv_pkts':
ice_rxtx.c:(.text+0x1d97): undefined reference to
`rte_mbuf_sanity_check'
/usr/bin/ld: ice_rxtx.o: in function
`ice_tx_queue_release_mbufs':
ice_rxtx.c:(.text+0x21e0): undefined reference to
`rte_mbuf_sanity_check'
/usr/bin/ld: ice_rxtx.c:(.text+0x22b3): undefined reference
to `rte_mbuf_sanity_check'
/usr/bin/ld: ice_rxtx.c:(.text+0x24a0): undefined reference
to `rte_mbuf_sanity_check'
/usr/bin/ld: ice_rxtx.c:(.text+0x2640): undefined reference
to `rte_mbuf_sanity_check'
/usr/bin/ld: ice_rxtx.o:ice_rxtx.c:(.text+0x299f):
more undefined references to `rte_mbuf_sanity_check' follow
Fixes: 50370662b7 ("net/ice: support device and queue ops")
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add ops link_update.
LSC interrupt is also enabled in this patch.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Normally when starting/stopping the device the queue
should be started and stopped. Support them both in
this patch.
Below ops are added,
dev_configure
dev_start
dev_stop
dev_close
dev_reset
rx_queue_start
rx_queue_stop
tx_queue_start
tx_queue_stop
rx_queue_setup
rx_queue_release
tx_queue_setup
tx_queue_release
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Add some MACRO defination and small functions which
are specific for DPDK.
Add readme too.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add the structures that define how the Rx/Tx queues
are used.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add the structures and defines that define what
protocols the NIC can handle.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add various headers that define status codes and
basic defines for use in the code.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add code that multiple other features use.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add code to read/write/query the NVM image.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add code to handle the virtual switch within the NIC.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add code for the basic TX scheduler.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add the structures for the control queues.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add all the device IDs that represent the NIC.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add the commands, error codes, and structures
for the sideband queue.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add the commands, error codes, and structures for
the admin queue.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add the structures required by the NIC.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add the registers that comprise the Intel(R) 800
Series NIC. There is no functionality in this patch.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
