Add support for sending traffic to the original DCF port
with 'port_representor' action by using DCF port id as 'port_id'.
For example:
testpmd> flow create 0 ingress pattern any
/ end actions port_representor port_id 0 / end
Signed-off-by: Zhichao Zeng <zhichaox.zeng@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add flow rule attribute "priority" support for AVF.
Lower values denote higher priority, the highest priority for
a flow rule is 0.
All subscription rule will have a lower priority than the rules
that be created by host.
Signed-off-by: Jie Wang <jie1x.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Support flow subscribption create/destroy/validation flow
rule for AVF.
For examples:
testpmd> flow create 0 ingress pattern eth / ipv4 / udp src is 11
/ end actions represented_port port_id 1 / end
testpmd> flow validate 1 ingress pattern eth / ipv4 / tcp src is 22
/ end actions represented_port port_id 1 / end
testpmd> flow destroy 1 rule 0
VF subscribes to a rule, which means the packets will be sent to VF
instead of PF, and only VF will receive the packets.
It is allowed multiple VF subscribe to same rule, the packets will
be replicated and received by each VF.
PF will destroy all subscriptions during VF reset.
Signed-off-by: Jie Wang <jie1x.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add flow subscription pattern support for AVF.
The supported patterns are listed below:
eth/vlan/ipv4
eth/ipv4(6)
eth/ipv4(6)/udp
eth/ipv4(6)/tcp
Signed-off-by: Jie Wang <jie1x.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
VF is able to subscribe a flow from PF by VIRTCHNL_FLOW_SUBSCRIBE.
PF is expected to offload a rule to hardware which will redirect
the packet that matching the required pattern to this VF.
Only a flow with dst mac address as PF's mac address can be subscribed.
VIRTCHNL_VF_OFFLOAD_FSUB_PF is used for Flow subscription capability
negotiation and only a trusted VF can be granted with this capability.
A flow can be unsubscribed by VIRTCHNL_FLOW_UNSUBSCRIBE.
Signed-off-by: Jie Wang <jie1x.wang@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
If cmd_details are defined or async flag is set,
don't copy the desc/buff back to temp.
Fixes: e5b2a9e957 ("net/avf/base: add base code for avf PMD")
Cc: stable@dpdk.org
Signed-off-by: Steven Zou <steven.zou@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
I225 devices have only one PHY vendor. There is unnecessary to check
_I_PHY_ID during the link establishment and auto-negotiation process,
the checking also caused devices like i225-IT failed. This patch is to
remove the mentioned unnecessary checking.
Cc: stable@dpdk.org
Signed-off-by: Mah Yock Gen <yock.gen.mah@intel.com>
Signed-off-by: Taripin Samuel <samuel.taripin@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The ice has the feature to extract protocol fields into flex descriptor
by programming per queue. However, the dynamic field for proto_ext are
allocated by PMD, it is the responsibility of application to reserved
the field, before start DPDK.
Application with parse the offset and proto_ext name to PMD with devargs.
Remove related private API in 'rte_pmd_ice.h' and 'rte_pmd_ice.h' file.
Signed-off-by: Kevin Liu <kevinx.liu@intel.com>
Tested-by: Jin Ling <jin.ling@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When updating an ingress session update the internal values before
making the virtual channel request.
Fixes: 6bc987ecb8 ("net/iavf: support IPsec inline crypto")
Cc: stable@dpdk.org
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
iavf_xmit_pkts() sets tx_tail to the next of last transmitted
Tx descriptor. So the cleanup of Tx done descriptors must be started
from tx_tail, not from the next of tx_tail.
Otherwise rte_eth_tx_done_cleanup() doesn't free the first Tx done mbuf
when tx queue is full.
Fixes: 86e44244f9 ("net/iavf: cleanup Tx buffers")
Cc: stable@dpdk.org
Signed-off-by: Aleksandr Miloshenko <a.miloshenko@f5.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Support disabling DCF ACL engine via devarg "acl=off" in cmdline, aiming to
shorten the DCF startup time.
Signed-off-by: Zhichao Zeng <zhichaox.zeng@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
FDIR rules with masks are not supported in current code. Thus add
pattern check for IPv4/UDP/TCP/SCTP addr/port to terminate the FDIR
programming stage.
Fixes: d5eb3e600d ("net/iavf: support flow director basic rule")
Cc: stable@dpdk.org
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When the driver tells the VF to insert VLAN tag using the L2TAG2 field,
vector Tx path does not use Tx context descriptor and would cause VLAN tag
inserted into the wrong location.
This commit is to fix issue by using normal Tx path to handle L2TAG2 case.
Fixes: 3aa9573385 ("net/iavf: fix VLAN insert")
Cc: stable@dpdk.org
Signed-off-by: Yiding Zhou <yidingx.zhou@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
According to the ABI and API Deprecation, remove deprecated VF action
as hard-to-use / ambiguous.
Action REPRESENTED_PORT should be used instead.
Signed-off-by: Zhichao Zeng <zhichaox.zeng@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When ol_flag is only RTE_MBUF_F_TX_IPV4, the Tx L3
checksum offload is still configured to IIPT in the
command field of Tx data descriptor.
This patch is to fix the issue to make the Tx L3
checksum offload flags and Tx data descriptor
consistent.
Fixes: 1e728b0112 ("net/iavf: rework Tx path")
Cc: stable@dpdk.org
Signed-off-by: Ke Zhang <ke1x.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add support for action REPRESENTED_PORT in DCF. Supposed to send matching
traffic to the entity (VF) represented by the given ethdev, at embedded
switch level.
Signed-off-by: Zhichao Zeng <zhichaox.zeng@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Position src and dst mac bit in iavf fdir eth inset, thus
eth pattern can support src and dst mac match.
Signed-off-by: Dexia Li <dexia.li@jaguarmicro.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Inner IPv4 and IPv6 symmetric RSS hash is not valid for raw pattern.
This patch fixes the issue by adding the corresponding protocol ID
for inner IPv4/6.
Fixes: 0837da2e27 ("net/ice/base: support add HW profile for RSS raw flow")
Cc: stable@dpdk.org
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch fixes the issue that the RSS does not update correctly
when the user sets it to none.
Fixes: 4717a12cfa ("net/ice: initialize and update RSS based on user config")
Cc: stable@dpdk.org
Signed-off-by: Zhichao Zeng <zhichaox.zeng@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
A segmentation fault occurs when testpmd exit.
This is due to fetching the device name from PF, PF
is freed firstly and then VF representor is called
later.
This commit fixes the bug by fetching the device
name from VF representor instead of PF.
Fixes: e391a7b7f8 ("net/i40e: fix multi-process shared data")
Cc: stable@dpdk.org
Signed-off-by: Ke Zhang <ke1x.zhang@intel.com>
Acked-by: Yuying Zhang <yuying.zhang@intel.com>
Update event vector transmit routine to honor elem_offset.
Use ``rte_event_vector::elem_offset`` to report partial
vector transmission to the application when there is not
enough space in the SQ.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Disable timer resolution estimation, read TIM LF clock registers
to get the current running clock counter as estimating causes
time drift.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Avoid reading non-cached registers in fastpath.
PENDSTATE need not be read before tag flush in Tx enqueue
context as we have additional checks prior to check for
pending flushes.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Removed support to limit XAQ from devargs. If XAQ is limited, new add
works could run out of XAQ entries and disable the queue.
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
The ioat driver has been superseded by the ioat and idxd dmadev drivers,
and has been deprecated for some time, so remove it.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This patch sets the max length of dst in OpenSSL 3.0 lib EVP MAC final
routine to ensure enough space for the result.
Fixes: 75adf1eae4 ("crypto/openssl: update HMAC routine with 3.0 EVP API")
Cc: stable@dpdk.org
Signed-off-by: Kai Ji <kai.ji@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Remove L2 header update for outbound inline packets as
application is already taking care of the same.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Add support for offloading RTE_CRYPTO_CIPHER_AES_DOCSISBPI and
RTE_CRYPTO_CIPHER_DES_DOCSISBPI algorithms to symmetric crypto session.
Signed-off-by: Volodymyr Fialko <vfialko@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Errors in crypto adapter datapath can be handled gracefully. So the
error print can be moved under debug.
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
'struct roc_se_buf_ptr ctx_buf' has fields for a pointer and len.
The field for len was unused.
It is removed and the required pointer is added in the parent struct.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Identify the datapath thread to be used during session create. This can
be used to call right function early on to avoid multiple session
specific checks in datapath functions.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Change engine group of Chacha20-Poly1305 as it is
supported on IE engines also.
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Auth IV is not applicable for kasumi cipher operation.
Removed the same.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Field op_minor is required only for digest encrypted cases
with chained ops, hence removed from AES-GCM path.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
When the flag ROC_SE_VALID_MAC_BUF is set, digest length will be
non-zero. Remove extra check in datapath.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Fill FC params routine now caters to only KASUMI & FC_GEN.
Call appropriate functions directly.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
For both AES-GCM and ChaChaPoly, digest size must be non-zero.
So remove the conditional handling in the datapath.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Limit meta buf pool cache size as 128. Having 512 as
the cache size would cause more time for refill.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Volodymyr Fialko <vfialko@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Zeroising AES-CMAC IV would be done in microcode.
Clearing in DPDK is not redundant.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Added support for burst enqueue for cn10k event crypto adapter.
Instructions will be grouped based on the queue pair and sent in a burst.
Signed-off-by: Volodymyr Fialko <vfialko@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
GCC 12 raises the following warning:
In function '_mm_storeu_si128',
inlined from 'rte_mov16' at
../lib/eal/x86/include/rte_memcpy.h:508:2,
inlined from 'rte_mov128' at
../lib/eal/x86/include/rte_memcpy.h:542:2,
inlined from 'rte_memcpy_generic' at
../lib/eal/x86/include/rte_memcpy.h:732:4,
inlined from 'rte_memcpy' at
../lib/eal/x86/include/rte_memcpy.h:882:10,
inlined from 'qat_sym_do_precomputes.constprop' at
../drivers/crypto/qat/qat_sym_session.c:1434:2:
/usr/lib/gcc/x86_64-pc-linux-gnu/12.1.1/include/emmintrin.h:739:8: error:
array subscript 8 is outside array bounds of 'unsigned char[128]'
[-Werror=array-bounds]
739 | *__P = __B;
| ~~~~~^~~~~
../drivers/crypto/qat/qat_sym_session.c:
In function 'qat_sym_do_precomputes.constprop':
../drivers/crypto/qat/qat_sym_session.c:1305:17: note:
at offset 192 into object 'opad.750' of size 128
1305 | uint8_t
opad[qat_hash_get_block_size(ICP_QAT_HW_AUTH_ALGO_DELIMITER)];
| ^~~~
../drivers/crypto/qat/qat_sym_session.c:
In function 'qat_sym_do_precomputes.constprop':
../drivers/crypto/qat/qat_sym_session.c:1304:17: note:
at offset 128 into object 'ipad.749' of size 128
1304 | uint8_t
ipad[qat_hash_get_block_size(ICP_QAT_HW_AUTH_ALGO_DELIMITER)];
| ^~~~
Added a check to prevent compiler warnings.
Fixes: 1703e94ac5 ("qat: add driver for QuickAssist devices")
Cc: stable@dpdk.org
Signed-off-by: Amit Prakash Shukla <amitprakashs@marvell.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
This commit fixes answer sent to physical device in
vf2pf communication.
Fixes: b17d16fb47 ("common/qat: add PF to VF communication")
Cc: stable@dpdk.org
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Some cryptographic algorithms such as MD5 and DES are now considered legacy
and not enabled by default in OpenSSL 3.0. Load up legacy provider as MD5
DES are needed in QAT session pre-computes and secure session creation.
Fixes: 3227bc7138 ("crypto/qat: use intel-ipsec-mb for partial hash and AES")
Cc: stable@dpdk.org
Signed-off-by: Kai Ji <kai.ji@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Arm port of ipsec_mb library [1] has different header file name than
the Intel ipsec_mb library. Proper header name is picked according to
the architecture to get the code compile when ipsec_mb is installed on
Arm platform.
And the Arm port currently supports ZUC and SNOW3g. Call to other
algorithms will be blocked.
[1] https://gitlab.arm.com/arm-reference-solutions/ipsec-mb/-/tree/main
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Ashwin Sekhar T K <asekhar@marvell.com>
The intel-ipsec-mb header is included by ipsec_mb_private header file.
Hence removed intel-ipsec-mb from files that have ipsec_mb_private
included.
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Enable support for arm64 architecture in ipsec_mb. x86
specific code is conditionally compiled only for x86
architecture builds. Other architectures will be unsupported.
Signed-off-by: Ashwin Sekhar T K <asekhar@marvell.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
This patch add in libcrypto version check before enable libipsec-mb for
QAT. The intel-ipsec-mb lib for partial hash and AES calculation should
only be enabled when both OpensSSL 3.0 and IPSec_MB 1.2.0 are installed
on the system.
Fixes: 3227bc7138 ("crypto/qat: use intel-ipsec-mb for partial hash and AES")
Cc: stable@dpdk.org
Signed-off-by: Kai Ji <kai.ji@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Fix stale XAQ depth check pointers in workslot memory after
XAQ pool resize.
Fixes: bd64a963d2 ("event/cnxk: use common XAQ pool functions")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Added new fields to represent event queue weight and affinity in
rte_event_queue_conf structure. Internal op to get queue attribute is
removed as it is no longer needed. Updated driver to use the new field.
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add support to configure and use periodic event timers in
software timer adapter.
The structure ``rte_event_timer_adapter_stats`` is extended
by adding a new field, ``evtim_drop_count``. This stat
represents the number of times an event_timer expiry event
is dropped by the event timer adapter.
Updated the software eventdev pmd timer_adapter_caps_get
callback function to report the support of periodic
event timer capability.
Signed-off-by: Naga Harish K S V <s.v.naga.harish.k@intel.com>
Acked-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Add the support of reassembly functions callback
assignment to eventdev dequeue and dequeue_burst.
Fixes: c062f5726f ("net/cnxk: support IP reassembly")
Cc: stable@dpdk.org
Signed-off-by: Rahul Bhansali <rbhansali@marvell.com>
Add preliminary Tx queue depth check and return on failure.
Once the check passes, tx_adapter_enqueue() function becomes
a blocking call till it succeeds.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
The software eventdev PMD reports todo-fix-name as the
device name.
Fixes: c66baa68e4 ("event/sw: add dump function for easier debugging")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Fix bug in flow migration, which under certain conditions causes
reordering and violation of atomicity guarantees.
The issue occurs when the processing of a flow (on an atomic queue)
has resulted in events enqueued to a flow currently being migrated,
and the former (producer) flow is also selected for migration. The
events are buffered ("paused") on the originating port, and released
(forwarded) when the migration has completed. However, at the time of
"unpausing" the latter (consumer) flow, processing of the producer
flow on the port to which it was migrated may have already produced
events, for the same paused flow. This constitutes a race condition,
and depending on which port wins, reordering may have been introduced.
This patch forbids migration when a port has paused events, since
those events may have been the result of processing a to-be-migrated
flow.
This patch also disallows processing events pertaining to a flow under
migration, for the same reason. A new buffer is introduced, which
holds such not-yet-processed events dequeued from the port's input
ring. Such events are forwarded to the target port as a part of the
migration process.
The 'forwarding' migration state is eliminated, and instead background
processing is only performed if there are no unreleased events on the
port.
The bug is primarily triggered in situations where multiple flows are
migrated as one transaction, but may occur even if only a single flow
is migrated (e.g., with older DSW versions, which does not support
multi-flow migration).
Fixes: f6257b22e7 ("event/dsw: add load balancing")
Cc: stable@dpdk.org
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Such deprecation was commenced in DPDK 21.11.
Since then, no parties have objected. Remove.
The patch breaks ABI.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
Such deprecation was commenced in DPDK 21.11.
Since then, no parties have objected. Remove.
The patch breaks ABI.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
Such deprecation was commenced in DPDK 21.11.
Since then, no parties have objected. Remove.
The patch breaks ABI.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
Such deprecation was commenced in DPDK 21.11.
Since then, no parties have objected. Remove.
The patch breaks ABI.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
There has been support for similar action PORT_ID for
some time already, but this action will be deprecated.
Support action REPRESENTED_PORT before the transition.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
There's been support for similar actions PHY_PORT and PORT_ID
for some time already, but these actions are being deprecated.
Support action REPRESENTED_PORT to prepare for the transition.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Add multi-seg support for Inline IPsec.
Also in reassembly, FI_PAD is not required to compute pointer to
Fragment info because it is only at CPT_PARSE_HDR_S + FI_OFFSET * 8
and is always 8B aligned.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Rahul Bhansali <rbhansali@marvell.com>
When dumping hardware flow data, print any counter
configured on the flow as well.
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Reviewed-by: Kiran Kumar K <kirankumark@marvell.com>
Add helper API to complete device info for debug purposes.
This is used by ethdev dump API to dump ethdev's internal info.
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Enable ESN and anti-replay in IPsec capabilities
Add support for session update security API
Fix the CPT command population for ESN enabled case
Signed-off-by: Vidya Sagar Velumuri <vvelumuri@marvell.com>
Limit port specific SA table size to 1 entry when not used.
This is useful when inline device is enabled as then
Port specific SA table will not be used for Inline IPsec
inbound processing.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Wait for CPT flow control on WQE path. This is to
avoid CPT queue overflow and thereby a CPT misc
interrupt.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Update CQ threshold limit associated with sq.
This is used when we need completions for packets that are
successfully transmitted.
Signed-off-by: Kommula Shiva Shankar <kshankar@marvell.com>
Added mailbox for masking and setting nix_rq_ctx
parameters and enabling rq masking in ipsec_cfg1
so second pass is applied to all RQ's
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Enable below ciphers and auths as part of capabilities for inline IPsec
AES_CTR, AES_XCBC_MAC, AES_GMAC.
Signed-off-by: Vidya Sagar Velumuri <vvelumuri@marvell.com>
Updated shaper profile with user configurable RED algorithm.
This helps in configuring a TM node in red drop mode vs
stall mode.
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
This patch set enables aging on CNF105 variant of CN10K platform.
Enables aging statistics while dumping/reset SQ statistics.
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Add capabilities for HMAC_SHA2 and udp encap for 9k
security offload in inline mode.
Set explicit IV mode in IPsec context when IV is provided by the
application
Signed-off-by: Vidya Sagar Velumuri <vvelumuri@marvell.com>
Use the Full context SA structures and command in IPsec fast path.
For inline outbound, populate CPT instruction as per full context.
Added new macros and functions with respect to full context.
Populate WQE ptr in CPT instruction with proper offset from mbuf.
Also add option to override outbound inline SA IV for debug
Update mbuf length based on IP version in Rx post process purposes
via environment variable.
User can set env variable as:
export ETH_SEC_IV_OVR="0x0, 0x0,..."
Signed-off-by: Vidya Sagar Velumuri <vvelumuri@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Add support for zero aura for inline meta packets and register
callback to ROC to create meta pool via mempool. Also
add devargs to override meta buffer count and size.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Add support to create zero aura for inline inbound meta packets when
platform supports it.
AURA zero will hold as many buffers as all the available
pkt pool with a data to accommodate 384B in best case to store
meta packets coming from Inline IPsec.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Update attributes to pools used by NIX so that we
can later identify which mempools are packet pools
and which are used for Inline IPsec enabled ethdev.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Add support to set/get per-aura buf type with refs and
get sum of all aura limits matching given buf type mask
and val.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Reserve AURA id 0 on cn10k and provide mechanism to specifically
allocate it and free it via roc_npa_* API's.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Similar to other RQ's, delay inline device RQ until dev is started
to avoid traffic reception when device is stopped.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Limit meta AURA workaround to CN10K A0.
Also other NIX and Inline related Erratas applicable for CN10K A1.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Fix missing FC wait for outbound path in vector mode.
Currently only poll mode has it.
Fixes: 358d02d20a ("net/cnxk: support flow control for outbound inline")
Cc: stable@dpdk.org
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Updates CPT inbound inline IPsec configuration mailbox
to provide opcode and CPT credit from VF.
This patch also adds mailbox for reading inbound IPsec
configuration.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Updating the logic for getting part and pass value for cn10k family,
as device tree compatible logic does not work in VMs.
Scanning all the PCI device and detect first RVU device, subsystem
device file gives part no and revision file provide pass information.
Fixes: 014a9e222b ("common/cnxk: add model init and IO handling API")
Cc: stable@dpdk.org
Signed-off-by: Harman Kalra <hkalra@marvell.com>
A recent change removed errno.h from rte_common.h.
x86 EAL headers seem to include it (probably via
rte_spinlock/rte_cpuflags) but other architectures won't.
Add an explicit inclusion.
Fixes: d826133ae8 ("net/octeon_ep: support CN10K SoC")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Add FC check in vector event Tx path, the check needs to be
performed after head wait right before LMTST is issued.
Since, SQB pool FC updates are delayed w.r.t the actual
utilization of pool add sufficient slack to avoid overflow.
Added a new device argument to override the default SQB slack
configured, can be used as follows:
-a 0002:02:00.0,sqb_slack=32
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Add support to enable PTP per ethernet device when that
specific ethernet device is connected to event device via
Rx adapter.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
This patch adds the required functionality in the Octeon endpoint
driver to support the CN10K endpoint device. It adds the CN10K SoC
specific routines to configure, enable, and disable input and output
queues to establish basic data transfers.
Signed-off-by: Sathesh Edara <sedara@marvell.com>
Correct the partnumber value for CN103xx.
Fixes: dd462f68f0 ("common/cnxk: support CN103XX platform")
Cc: stable@dpdk.org
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Changed log level from info to debug for a log message
printed during MCAM allocation.
Fixes: 1f66919817 ("common/cnxk: improve MCAM entries management")
Cc: stable@dpdk.org
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Reviewed-by: Kiran Kumar K <kirankumark@marvell.com>
Added functionality to update link speed, duplex mode and link state.
Signed-off-by: Sathesh Edara <sedara@marvell.com>
Acked-by: Veerasenareddy Burru <vburru@marvell.com>
This patch renames octeon end point driver from octeontx_ep to
octeon_ep to enable single unified driver to support current
OcteonTx and future Octeon PCI endpoint NICs to reflect common
driver for all Octeon based PCI endpoint NICs.
Signed-off-by: Sathesh Edara <sedara@marvell.com>
Acked-by: Veerasenareddy Burru <vburru@marvell.com>
Add to read link status register of UTP mode, to ensure link status of
mixed mode, for YT PHY.
Fixes: 1c44384fce ("net/ngbe: support custom PHY interfaces")
Cc: stable@dpdk.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Remain the same max frame size after the device restarts.
Fixes: 07baabb6a5 ("net/ngbe: support MTU set")
Cc: stable@dpdk.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Since firmware does not use the semaphore between software and firmware.
Remove useless unilateral semaphore setting.
Fixes: f501a195bd ("net/ngbe: initialize and validate EEPROM")
Cc: stable@dpdk.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Rename rx_oversize_errors to rx_oversize_cnt since it depends on giant
packet size limit instead of MTU, by hardware design.
Rename rx_drop_packets and tx_drop_packets to rx_dma_drop and tx_dma_drop
to indicate the drop location.
And add tx_dma_drop to extended statistics.
Fixes: 8b433d04ad ("net/ngbe: support device xstats")
Cc: stable@dpdk.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Rename rx_oversize_errors to rx_oversize_cnt since it depends on giant
packet size limit instead of MTU, by hardware design.
Rename rx_drop_packets to rx_rdb_drop to indicate the drop location.
And add rx_dma_drop to extended statistics.
Fixes: 91fe49c87d ("net/txgbe: support device xstats")
Cc: stable@dpdk.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Since firmware does not use the semaphore between software and firmware.
Remove useless unilateral semaphore setting.
Fixes: 35c90ecccf ("net/txgbe: add EEPROM functions")
Cc: stable@dpdk.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Convert the correct packet type and flow type, to fix IPv6 rule in FDIR.
Fixes: b973ee2674 ("net/txgbe: parse flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Prepend `0x` to the NFP HWINFO header value that is printed to improve
the readability of the printed statement.
Fixes: c7e9729da6 ("net/nfp: support CPP")
Cc: stable@dpdk.org
Signed-off-by: James Hershaw <james.hershaw@corigine.com>
Reviewed-by: Chaoyong He <chaoyong.he@corigine.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Previously the nfp driver has supported NFP chips with the Netronome
PCIe ID. This patch extends the PMD to also support NFP chips with the
Corigine PCIe vendor ID (0x1da8), which at this point are assumed to be
otherwise identical from a software perspective.
Signed-off-by: James Hershaw <james.hershaw@corigine.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Nfp log print was controlled by nfp's own macro before. This
commit changes to use dpdk debug rx/tx macro to control it.
Signed-off-by: Long Wu <long.wu@corigine.com>
Reviewed-by: Chaoyong He <chaoyong.he@corigine.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Acked-by: Ferruh Yigit <ferruh.yigit@xilinx.com>
Nfp cpp log print is not available before. Add support for cpp
print log and set its initial priority to "NOTICE".
Signed-off-by: Long Wu <long.wu@corigine.com>
Reviewed-by: Chaoyong He <chaoyong.he@corigine.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Removed freeing of mbuf in scattered Rx as it should not be freed in rx.
Fixes: 965b3127d4 ("net/axgbe: support scattered Rx")
Cc: stable@dpdk.org
Signed-off-by: Bhagyada Modali <bhagyada.modali@amd.com>
Acked-by: Chandubabu Namburu <chandu@amd.com>
Updated the logic to remove the extra increments of the variables.
Fixes: 965b3127d4 ("net/axgbe: support scattered Rx")
Cc: stable@dpdk.org
Signed-off-by: Bhagyada Modali <bhagyada.modali@amd.com>
Acked-by: Chandubabu Namburu <chandu@amd.com>
Updated pkt_len and data_len in the last segment of the packet.
Fixes: 965b3127d4 ("net/axgbe: support scattered Rx")
Cc: stable@dpdk.org
Signed-off-by: Bhagyada Modali <bhagyada.modali@amd.com>
Acked-by: Chandubabu Namburu <chandu@amd.com>
Error check needs to be done only for last segment of Jumbo packet.
Freed first_seg and reset eop to 0 in error case
Fixes: 965b3127d4 ("net/axgbe: support scattered Rx")
Cc: stable@dpdk.org
Signed-off-by: Bhagyada Modali <bhagyada.modali@amd.com>
Acked-by: Chandubabu Namburu <chandu@amd.com>
Remove deprecated fdir_conf from device configuration.
Assume that mode is equal to RTE_FDIR_MODE_NONE.
Add internal Flow Director configuration copy in ixgbe and txgbe device
private data since flow API supports requires it. Initialize mode to
the first flow rule mode on the rule validation or creation.
Since Flow Director configuration data types are still used by some
drivers internally, move it from public API to ethdev driver internal
API.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Dongdong Liu <liudongdong3@huawei.com>
Flow Director configuration is deprecated in generic ethdev device
configuration and will be removed. However, it is essential for
the driver flow API support and cannot be removed completely without
loss of flow API support. Prepare to move the configuration into
device private data.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Flow Director configuration is deprecated in generic ethdev device
configuration and will be removed. However, it is essential for
the driver flow API support and cannot be removed completely without
loss of flow API support. Prepare to move the configuration into
device private data.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
During initialization of the NFP driver, a file name for loading
application firmware is composed using the NIC's AMDA information and
port type (count and speed). E.g.: "nic_AMDA0145-1012_2x10.nffw".
In practice there may be many variants for each NIC type, and many of
the variants relate to assembly components which do not concern the
driver and application firmware implementation. Yet the current scheme
leads to a different application firmware file name for each variant,
because they have different AMDA information.
To reduce proliferation of content-duplicated application firmware
images or symlinks, the NIC's management firmware will only expose
differences between variants that need different application firmware
via a newly introduced hwinfo, "nffw.partno".
Use of the existing hwinfo, "assembly.partno", is maintained in order to
support for NICs with management firmware that does not expose
"nffw.partno".
Fixes: 646ea79ce4 ("net/nfp: move PF functions into its own file")
Cc: stable@dpdk.org
Signed-off-by: Peng Zhang <peng.zhang@corigine.com>
Reviewed-by: Chaoyong He <chaoyong.he@corigine.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com>
A intr_handle is being allocated as a hack to get a (proxy) eventfd from
the Linux interrupt implementation.
But this handle is never freed.
Remove this convoluted hack and create an eventfd in Linux case.
Fixes: d61138d4f0 ("drivers: remove direct access to interrupt handle")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ferruh Yigit <ferruh.yigit@xilinx.com>
When link status polling mode is used, the slave link status is
queried twice, which may be inconsistent. To fix this, we can keep
the latest queried link state.
Fixes: a45b288ef2 ("bond: support link status polling")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Min Hu (Connor) <humin29@huawei.com>
In bond_ethdev_rx_burst() function, we check the validity of the
'active_slave' as this code:
if (++active_slave == slave_count)
active_slave = 0;
However, the value of 'active_slave' maybe equal to 'slave_count',
when a slave is down. This is wrong and it can cause buffer overflow.
This patch fixes the issue by using '>=' instead of '=='.
Fixes: e1110e9776 ("net/bonding: fix Rx slave fairness")
Cc: stable@dpdk.org
Signed-off-by: Lei Ji <jilei8@huawei.com>
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Min Hu (Connor) <humin29@huawei.com>
Introduce a new command and remove the last part of specific port init
from testpmd.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ferruh Yigit <ferruh.yigit@xilinx.com>
Move related specific testpmd commands into this driver directory.
The bypass init is left in testpmd at this point and can be moved later.
While at it, fix checkpatch warnings.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ferruh Yigit <ferruh.yigit@xilinx.com>
For diagnostic, it may be useful to provide the PCI vendor and device
id.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Make rte_driver opaque for non internal users.
This will make extending this object possible without breaking the ABI.
Introduce a new driver header and move rte_driver definition.
Update drivers and library to use the internal header.
Some applications may have been dereferencing rte_driver objects, mark
this object's accessors as stable.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Make rte_bus opaque for non internal users.
This will make extending this object possible without breaking the ABI.
Introduce a new driver header and move rte_bus definition and helpers.
Update drivers and library to use the internal header.
Some applications may have been dereferencing rte_bus objects, mark
this object's accessors as stable.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
iova enum definition does not need to be defined as part of the bus API.
Move it to rte_eal.h.
With this step, rte_eal.h does not depend on rte_bus.h and rte_dev.h.
Fix existing code that was relying on these implicit inclusions.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The vmbus bus interface is for drivers only.
Mark as internal and move the header in the driver headers list.
While at it, cleanup the code:
- fix indentation,
- remove unneeded reference to bus specific singleton object,
- remove unneeded list head structure type,
- reorder the definitions and macro manipulating the bus singleton object,
- remove inclusion of rte_bus.h and fix the code that relied on implicit
inclusion,
Signed-off-by: David Marchand <david.marchand@redhat.com>
The vdev bus interface is for drivers only.
Mark as internal and move the header in the driver headers list.
While at it, cleanup the code:
- fix indentation,
- remove unneeded reference to bus specific singleton object,
- remove unneeded list head structure type,
- reorder the definitions and macro manipulating the bus singleton object,
- remove inclusion of rte_bus.h and fix the code that relied on implicit
inclusion,
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
The pci bus interface is for drivers only.
Mark as internal and move the header in the driver headers list.
While at it, cleanup the code:
- fix indentation,
- remove unneeded reference to bus specific singleton object,
- remove unneeded list head structure type,
- reorder the definitions and macro manipulating the bus singleton object,
- remove inclusion of rte_bus.h and fix the code that relied on implicit
inclusion,
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
The ifpga bus interface is for drivers only.
Mark as internal and move the header in the driver headers list.
While at it, cleanup the code:
- remove unneeded list head structure type,
- reorder the definitions and macro manipulating the bus singleton object,
- remove inclusion of rte_bus.h and fix the code that relied on implicit
inclusion,
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Remove unused symbols (exposed only in an internal header which
guarantees that no application out there relied on them).
Remove rte_ prefix and inline the rest to avoid having to expose them as
global symbols for a relatively small added value.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
The fslmc bus interface is for drivers only.
Mark as internal and move the header in the driver headers list.
While at it, cleanup internal structures:
- remove unneeded reference to bus specific singleton object,
- remove unneeded list head structure type,
- reorder the definitions and macro manipulating the bus singleton object,
- remove inclusion of rte_bus.h and update code that relied on it,
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The dpaa bus interface is for drivers only.
Mark as internal and move the header in the driver headers list.
While at it, cleanup internal structures:
- remove unneeded reference to bus specific singleton object,
- remove unneeded list head structure type,
- reorder the definitions and macro manipulating the bus singleton object,
- remove inclusion of rte_bus.h and update code that relied on it,
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The auxiliary bus interface is for drivers only.
Mark as internal and move the header in the driver headers list.
While at it, cleanup the code:
- fix indentation,
- remove unneeded reference to bus specific singleton object,
- remove unneeded list head structure type,
- reorder the definitions and macro manipulating the bus singleton object,
- remove inclusion of rte_bus.h and fix the code that relied on implicit
inclusion,
Signed-off-by: David Marchand <david.marchand@redhat.com>
Same as for device classes, external DPDK users may need to include some
bus headers for their out of tree drivers.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Those macros have no real value and are easily replaced with a simple
if() block.
Existing users have been converted using a new cocci script.
Deprecate them.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Those commands date back to the early stages of DPDK when only PCI
devices were supported.
At the time, developers may have used those commands to help in
debugging their buggy^Wwork in progress drivers.
Removing them, we can drop the dependency on the PCI bus and library and
make testpmd bus agnostic.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
There is no in-tree user for this accessor that returns the PCI bus
object.
On the other hand, a bus object can be retrieved by name using
rte_bus_find_by_name.
We can remove this driver specific API.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
A recent commit removed errno.h from rte_common.h.
It has to be added in various places where it is used,
and was implicitly included via rte_common.h,
but was forgotten in gpu/cuda.
As a result, the compilation is broken:
drivers/gpu/cuda/gdrcopy.c:116:17: error: ‘ENOTSUP’ undeclared
Note that rte_errno.h does not include errno.h.
The include of errno.h is added.
Fixes: 72b452c5f2 ("eal: remove unneeded includes from a public header")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Tested-by: David Marchand <david.marchand@redhat.com>
Do not include <ctype.h>, <errno.h>, and <stdlib.h> from <rte_common.h>,
because they are not used by this file.
Include the needed headers directly from the files that need them.
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Add CLI commands for selector tables group and member management.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Yogesh Jangra <yogesh.jangra@intel.com>
Remove the text parsing functions that are not used.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Yogesh Jangra <yogesh.jangra@intel.com>
The list of Ethernet devices within this driver is redundant, as the
DPDK global list of Ethernet devices can be used instead.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Yogesh Jangra <yogesh.jangra@intel.com>
Replace the legacy pipeline support with support for the SWX pipeline.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Yogesh Jangra <yogesh.jangra@intel.com>
Remove the TUN/TAP device support. The TUN/TAP devices are still
supported as virtual Ethernet devices through the TAP Poll Mode
Driver.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Yogesh Jangra <yogesh.jangra@intel.com>
Remove the Ethernet device meter API support.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Yogesh Jangra <yogesh.jangra@intel.com>
The local variables are getting inconsistent in data receiving routines
after queue error recovery.
Receive queue consumer index is getting wrong, need to reset one to the
size of the queue (as RQ was fully replenished in recovery procedure).
In MPRQ case, also the local consumed strd variable should be reset.
CVE-2022-28199
Fixes: 88c0733535 ("net/mlx5: extend Rx completion with error handling")
Cc: stable@dpdk.org
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Signed-off-by: Matan Azrad <matan@nvidia.com>
Since commit 49b536fc30 ("eal: load only shared libs from driver ..."),
we can specify a build directory to the -d option.
Suggested-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Added changes to enable CMAN (RED or PIE) at init
from profile configuration file.
By default CMAN code is enabled but not in use, when
there is no RED or PIE profile configured.
Signed-off-by: Marcin Danilewicz <marcinx.danilewicz@intel.com>
Acked-by: Jasvinder Singh <jasvinder.singh@intel.com>
Start a new release cycle with empty release notes.
The ABI version becomes 23.0.
The map files are updated to the new ABI major number (23).
The ABI exceptions are dropped and CI ABI checks are disabled because
compatibility is not preserved.
Special handling of removed drivers is also dropped in check-abi.sh and
a note has been added in libabigail.abignore as a reminder.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
This commit changes 2 error messages to better
describe cq_weight related errors, should one occur.
Fixes: ffa46fc4a2 ("event/dlb2: support CQ weight")
Cc: stable@dpdk.org
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
The cq_weight array must be sized for the maximum number
of eventdev ports, not the maximum number of DLB2
load balanced ports.
This commit fixes the above array sizing bug and resultant
coverity warning.
Coverity issue: 379234
Fixes: ffa46fc4a2 ("event/dlb2: support CQ weight")
Cc: stable@dpdk.org
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Previously, QinQ is enabled by default and can't be disabled,
but there'll be performance drop if QinQ is enabled.
So, disabled QinQ by default and also updated the knowing VLAN
issue with this configure.
Fixes: 5bd74df1db ("net/i40e: fix QinQ enablement")
Signed-off-by: Kevin Liu <kevinx.liu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Due to the change of struct rte_gtp_psc_generic_hdr, kernel driver can
not handle gtp_psc properly, we introduce a new structure to fix this
gap between kernel driver and struct rte_gtp_psc_generic_hdr.
Fixes: d5eb3e600d ("net/iavf: support flow director basic rule")
Cc: stable@dpdk.org
Signed-off-by: Wenxuan Wu <wenxuanx.wu@intel.com>
Tested-by: Zhimin Huang <zhiminx.huang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
libvhost calls dev_conf() before prosessing the
VHOST_USER_SET_VRING_CALL message for the last VQ. So
this message is processed after dev_conf() returns.
However, the dev_conf() function spawns a thread to set
rte_vhost_host_notifier_ctrl() before returning control to
libvhost. This parallel thread in turn invokes get_notify_area().
To get the notify_area, the vdpa driver needs to query the HW and
for this query it needs an enabled VQ.
But at the same time libvhost is processing the last
VHOST_USER_SET_VRING_CALL, and to do that it disables the last VQ.
Hence there is a race b/w the libvhost and the vdpa driver.
To resolve this race condition, query the HW and cache notify_area
inside dev_conf() instead of doing it the parallel thread.
Fixes: 630be406dc ("vdpa/sfc: get queue notify area info")
Cc: stable@dpdk.org
Signed-off-by: Abhimanyu Saini <absaini@amd.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Fix null pointer dereference reported in coverity scan.
Output some log information when lm_cfg is null.
Make sure lm_cfg is not null before operate on lm_cfg.
Coverity issue: 378882
Fixes: d7fe5a2861 ("net/ifc: support live migration")
Cc: stable@dpdk.org
Signed-off-by: Andy Pei <andy.pei@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
As stated in the manual, pthread_attr_init return value should be
checked.
Besides, a pthread_attr_t should be destroyed once unused.
In practice, we may have no leak (from what I read in glibc current code),
but this may change in the future.
Stick to a correct use of the API.
Fixes: 5cf3fd3af4 ("vdpa/mlx5: add CPU core parameter to bind polling thread")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Add PPD (PCIe Port Definition) status check for SPR (Sapphire Rapids).
Note that NTB on SPR has the same device id with that on ICX, while
the field offsets of PPD Control Register are different. Here, we use
the PCI device revision id to distinguish the HW platform (ICX/SPR)
and check the Port Config Status and Port Definition accordingly.
+---------------------------+--------------------+--------------------+
| Fields | Bit Range (on ICX) | Bit Range (on SPR) |
+---------------------------+--------------------+--------------------+
| Port Configuration Status | 12 | 14 |
| Port Definition | 9:8 | 10:8 |
+---------------------------+--------------------+--------------------+
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
The 'info' struct was being declared as a NULL pointer. If a NULL
pointer is passed to 'rte_dma_info_get', EINVAL is returned and the
struct is not populated. This subsequently causes a segfault when
dereferencing 'info'.
This patch fixes the issue by simply declaring 'info' on the stack and
passing its address to 'rte_dma_info_get'.
Fixes: 9449330a84 ("dma/idxd: create dmadev instances on PCI probe")
Cc: stable@dpdk.org
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
During PCI device close, any allocated memory needs to be free'd.
Currently, one of the free's is being called on an incorrect idxd_dmadev
struct member, namely 'batch_idx_ring'.
At device creation, memory is allocated for both 'batch_comp_ring' and
'batch_idx_ring' simultaneously. Calling free only on 'batch_idx_ring'
meant the first half of this memory was not being free'd, leading to the
memleak.
This patch fixes this memleak by calling free on 'batch_comp_ring' which
will free the memory for both rings.
Fixes: 9449330a84 ("dma/idxd: create dmadev instances on PCI probe")
Cc: stable@dpdk.org
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
ASAN reports a memory leak for the 'pci' pointer in the 'idxd_dmadev'
struct.
This is fixed by free'ing the struct when the last queue on the PCI
device is being closed.
Fixes: 9449330a84 ("dma/idxd: create dmadev instances on PCI probe")
Cc: stable@dpdk.org
Reported-by: Xingguang He <xingguang.he@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
