The TCP checksum includes IPV4 pseudo-header checksum and L3
payload checksum which include TCP header and TCP payload.
When mlx5 LRO is enabled, HW will calculate the TCP payload
checksum, PMD need complete the IPV4 pseudo-header checksum
and the TCP header checksum.
The mlx5_lro_update_tcp_hdr function completes the TCP header
checksum, but this function using lower 4 bits of data-offset
field in TCP header to get the whole TCP header length, this
will cause TCP header checksum wrong calculation.
Update the code using higher 4 bits of data-offset field
instead of lower 4 bits.
Fixes: e4c2a16eb1 ("net/mlx5: handle LRO packets in Rx queue")
Cc: stable@dpdk.org
Signed-off-by: Dong Zhou <dongz@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The number of descriptors to configure in a Rx/Tx queue is passed to
the mlx5_tx/rx_queue_pre_setup() function by value. That means any
adjustments of this variable are local and cannot affect the actual
value that is used to allocate mbufs in the mlx5_txq/rxq_new()
functions. Pass the number as a reference to actually update it.
Fixes: 6218063b39 ("net/mlx5: refactor Rx data path")
Fixes: 1d88ba1719 ("net/mlx5: refactor Tx data path")
Cc: stable@dpdk.org
Signed-off-by: Alexander Kozyrev <akozyrev@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The Legacy MPW (multi-packet write) should not be engaged implicitly.
We should exclude this function from a Tx burst routine selection
process unless it is requested specifically by setting the txq_mpw_en
devarg. Exclude this function from the selection process the same way
it is done for the Enhanced MPW in the mlx5_select_tx_function()
routine.
Fixes: eb8121ab9d ("net/mlx5: introduce Tx burst routine template")
Cc: stable@dpdk.org
Signed-off-by: Alexander Kozyrev <akozyrev@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
mlx5 statistics are calculated by several methods:
1. In software when packets go through datapath.
2. Calling ioctl with ETHTOOL command (Linux specific).
3. Reading counters from SYSFS device path (Linux specific).
The Linux related functions are moved to file linux/mlx5_os.c.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Function mlx5_devx_cmd_qp_query_tis_td() receives as parameter a pointer
to verbs QP returned by ibv_create_qp. Therefore support it only if
HAVE_IBV_FLOW_DV_SUPPORT is defined. Otherwise return an error ENOTSUP.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
There are three types of eth_dev_ops: primary, secondary and isolate.
Their function calls assignments are moved from common file
mlx5.c to the Linux specific file linux/mlx5_os.c.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
File mlx5_ethdev.c is partially moved to linux/mlx5_ethdev_os.c for
functions which are Linux specific. Functions which are Linux agnostics
remain in mlx5_ethdev.c file.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
mlx5_socket.c file is using APIs which are Linux specifics. Therefore
move it (including mlx5_socket.h) from net/mlx5 directory to
net/mlx5/linux directory. This commit also updates the Makefile and
the meson files.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
In DV enabled MLX5 PMD build mlx5_ipool_cfg[MLX5_IPOOL_MLX5_FLOW].size
was initiated for DV structure. If RTE initialization encountered MLX5
PCI function with disabled DV support
mlx5_ipool_cfg[MLX5_IPOOL_MLX5_FLOW].size was reduced to match legacy
verbs flow size. Since mlx5_ipool_cfg[MLX5_IPOOL_MLX5_FLOW] is a
global variable that change reflected on DV enabled MLX5 PCI functions
too.
Running flow with invalid ipool size crashes PMD.
The patch adjusts ipool flow size for each active PCI function.
Fixes: b88341ca35 ("net/mlx5: convert flow dev handle to indexed")
Cc: stable@dpdk.org
Signed-off-by: Gregory Etelson <getelson@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Recent patch added definition of mask MLX5_GTP_FLAGS_MASK, just
above function flow_dv_validate_item_gtp(), where it is used.
Patch was applied together with other patches which modified the same
file, so the mask was located further away from the function it is
used in.
This patch moves the mask definition to the proper location.
Fixes: 563ac307a4 ("net/mlx5: support match on GTP flags")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
When capturing packets into a PCAP file, DPDK currently uses
microseconds for the timestamps. But libpcap supports interpreting
tv_usec as nanoseconds depending on the file timestamp precision,
as of commit ba89e4a18e8b ("Make timestamps precision configurable").
To support this, use PCAP_TSTAMP_PRECISION_NANO when creating the
empty PCAP file as specified by PCAP_OPEN_DEAD(3PCAP) and implement
nanosecond timeval addition. This also ensures that the precision
reported by capinfos is nanoseconds (9).
Note that NSEC_PER_SEC is defined as 1000000000L instead of 1e9 since
the latter might be interpreted as floating point.
Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
There are coverity defects related "Unintended sign extension" in the
internal static function named hns3_get_regs_length used for dumping reg
operation.
This patch fixes them by replacing the data type of cmdq_lines,
common_lines, ring_lines and tqp_intr_lines with uint32_t in the inner
static function named hns3_get_regs_length of hns3 PMD driver.
Coverity issue: 349917, 349914
Fixes: 936eda25e8 ("net/hns3: support dump register")
Cc: stable@dpdk.org
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Currently, there are coverity defects warning as below:
CID 349937 (#1 of 1): Unintended sign extension (SIGN_EXTENSION)
sign_extension: Suspicious implicit sign extension: port_number with
type uint16_t (16 bits, unsigned) is promoted in port_number << cur_pos
to type int (32 bits, signed), then sign-extended to type unsigned long
(64 bits, unsigned). If port_number << cur_pos is greater than
0x7FFFFFFF, the upper bits of the result will all be 1.
CID 349893 (#1 of 1): Unintended sign extension (SIGN_EXTENSION)
sign_extension: Suspicious implicit sign extension: vlan_tag with type
uint8_t (8 bits, unsigned) is promoted in vlan_tag << cur_pos to type
int (32 bits, signed), then sign-extended to type unsigned long (64
bits, unsigned). If vlan_tag << cur_pos is greater than 0x7FFFFFFF, the
upper bits of the result will all be 1.
This patch fixes them by replacing the data type of port_number and
vlan_tag with uint32_t in the inner static function named
hns3_fd_convert_meta_data of hns3 PMD driver.
Coverity issue: 349937, 349893
Fixes: fcba820d9b ("net/hns3: support flow director")
Cc: stable@dpdk.org
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
There is a coverity defect related "Unchecked return value".
The internal static hns3_reset_err_handle function is reset error
process of hns3 PMD driver. If failure in reset process, it does not
mean that the network port is completely unavailable, so the command
interface between driver and firmware still needs to be initialized.
Regardless of whether the execution of the function named hns3_cmd_init
is successful or not, the next process after execution must be
continued, so there is no need to check the return value. If
hns3_cmd_init fails to execute, there will be corresponding log
information inside hns3_cmd_init.
This patch adds '(void)' Type conversion to avoid coverity warning.
Coverity issue: 349934
Fixes: 2790c64647 ("net/hns3: support device reset")
Cc: stable@dpdk.org
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
There is a coverity defect related "Argument cannot be negative".
This patch fixes it by passing '-ret' to the function strerror() when
ret is negative.
Coverity issue: 349933
Fixes: fcba820d9b ("net/hns3: support flow director")
Cc: stable@dpdk.org
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
1. Replace 'struct ibv_device *' with 'void *' in 'struct
mlx5_dev_spawn_data'. Define a getter function to retrieve the
device name.
2. Rename ibv_dev and ibv_port as phys_dev and phys_port
respectively.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
File drivers/net/linux/mlx5_os.h is added. It includes specific
Linux definitions such as PCI driver flags, link state changes
interrupts, link removal interrupts, etc.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Refactor PCI probing related code. Move Linux specific functions (as
well as verbs and dv related code) from mlx5.c file to linux/mlx5_os.c
file.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
umem field is used in several structs. Its type 'struct mlx5dv_devx_umem
*' is changed to 'void *'. This change will allow non-Linux OS
compilations.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Define 'struct mlx5_dev_attr' which is ibv and dv independent. It
contains attribute that were originally contained in 'struct
ibv_device_attr_ex' and 'struct mlx5dv_context dv_attr'. Add a new API
mlx5_os_get_dev_attr() which fills in the new defined struct.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Replace 'struct ibv_pd *' with 'void *' in struct mlx5_ctx_shared and
all function calls in mlx5 PMD.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
'ctx' type (field in 'struct mlx5_ctx_shared') is changed from 'struct
ibv_context *' to 'void *'. 'ctx' members which are verbs dependent
(e.g. device_name) will be accessed through getter functions which are
added to a new file under Linux directory: linux/mlx5_os.c.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Remove its own bit operation APIs and use the common one,
this can reduce the code duplication largely.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Remove its own bit operation APIs and use the common one,
this can reduce the code duplication largely.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Remove its own bit operation APIs and use the common one,
this can reduce the code duplication largely.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Remove its own bit operation APIs and use the common one,
this can reduce the code duplication largely.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
This patch adds support for set_mtu API which can be used to change
the Maximum Transmission unit (MTU) from application.
Signed-off-by: Girish Nandibasappa <girish.nandibasappa@amd.com>
Acked-by: Amaranath Somalapuram <asomalap@amd.com>
add support for RSS reta/hash query and update function
Signed-off-by: Chandu Babu N <chandu@amd.com>
Acked-by: Amaranath Somalapuram <asomalap@amd.com>
The i40e neon vector implementation is not compiled with meson.
Add the file to meson for Arm platform.
Fixes: e940646b20 ("drivers/net: build Intel NIC PMDs with meson")
Cc: stable@dpdk.org
Reported-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Base on hns3 network engine, when the rte_eth_tx_burst API is called
by Upper Level Process, if PKT_TX_TCP_SEG flag is set and tso_segsz
is 0 in the input parameter structure rte_mbuf, hns3 PMD driver will
process this packet as an non-TSO packet, otherwise hardware will enter
an abnormal state.
Fixes: 6dca716c9e ("net/hns3: support TSO")
Cc: stable@dpdk.org
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Currently, based on hns3 network engine, driver always reports the
incoming packet's VLAN tags to the structure rte_mbuf those are the
output parameter pointers in '.rx_pkt_burst' ops implementation
function, and never reports PKT_RX_VLAN_STRIPPED flag to the structure
rte_mbuf even if Upper Level Process configured hardware strip by
calling rte_eth_dev_configure or rte_eth_dev_set_vlan_offload API
function. It makes the ULP unable to know the stripping of VLAN.
It is supposed to present the stripped flags to the mbuf ol_flags, and
report the right VLAN tag.
And as hardware constraints, the stripped VLAN tag will always in the Rx
descriptor. Even if setting a PVID based on the function, the PVID will
be reported to the Rx descriptor. So the driver need to determine which
VLAN tag should be reported to output the structure rte_mbuf in
'.rx_pkt_burst' ops implementation function named hns3_recv_pkts.
Fixes: bba6366983 ("net/hns3: support Rx/Tx and related operations")
Fixes: 411d23b9ea ("net/hns3: support VLAN")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Currently, based on hns3 PF device, hardware will strip 2 vlan tags when
ULP calls rte_eth_dev_set_vlan_pvid API function to set a PVID whether
vlan strip related offload is turned on by calling rte_eth_dev_configure
or rte_eth_dev_set_vlan_offload API function.
When receiving a QinQ packet with the pvid tag, if ULP does not
configure the vlan strip by the method mentioned above, a layer of vlan
tag will be lost to ULP, which is not the expected result.
It is supposed to configure the vlan strip according to the upper level
process's configuration.
Fixes: 411d23b9ea ("net/hns3: support VLAN")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Maximum burst size of Vectorized Rx burst routine is set to
MLX5_VPMD_RX_MAX_BURST(64). This limits the performance of any
application that would like to gather more than 64 packets from
the single Rx burst for batch processing (i.e. VPP).
The situation gets worse with a mix of zipped and unzipped CQEs.
They are processed separately and the Rx burst function returns
small number of packets every call.
Repeat the cycle of gathering packets from the vectorized Rx routine
until a requested number of packets are collected or there are no
more CQEs left to process.
Fixes: 6cb559d67b ("net/mlx5: add vectorized Rx/Tx burst for x86")
Cc: stable@dpdk.org
Signed-off-by: Alexander Kozyrev <akozyrev@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Currently, when flow destroyed, some memory resources may still be kept
as cached to help next time create flow more efficiently.
Some system may need the resources to be more flexible with flow create
and destroy. After peak time, with millions of flows destroyed, the
system would prefer the resources to be reclaimed completely, no cache
is needed. Then the resources can be allocated and used by other
components. The system is not so sensitive about the flow insertion
rate, but more care about the resources.
Both DPDK mlx5 PMD driver and the low level component rdma-core have
provided the flow resources to be configured cached or not, but there is
no APIs or parameters exposed to user to configure the flow resources
cache mode. In this case, introduce a new PMD devarg to let user
configure the flow resources cache mode will be helpful.
This commit is to add a new "reclaim_mem_mode" to help user configure if
the destroyed flows' cache resources should be kept or not.
Their will be three mode can be chosen:
1. 0(none). It means the flow resources will be cached as usual. The
resources will be cached, helpful with flow insertion rate.
2. 1(light). It will only enable the DPDK PMD level resources reclaim.
3. 2(aggressive). Both DPDK PMD level and rdma-core low level will be
configured as reclaimed mode.
With these three mode, user can configure the resources cache mode with
different levels.
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
While flow destroyed, rdma-core may still cache some resources for more
efficiently flow recreate. In case the peak time that millions of flows
created and destroyed, the cached resources will be very huge.
Currently, rdma-core provides the new function to configure the flow
resources not to be cached. Add the memory reclaim function to avoid
too many resources be cached.
This is the first patch for the memory reclaim. A new devarg will be
added to PMD to support the reclaim can be configured.
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
File mlx5_common.c includes both specific and non-specific Linux APIs.
Move the Linux specific APIS into a new file named linux/mlx5_common_os.c.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
File mlx5_nl.c is using Netlink APIs which are Linux specifics.
Move it (including file mlx5_nl.h) to common/mlx5/linux directory.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The glue file mlx5_glue.c is based on Linux specifics APIs.
Move it (including file mlx5_glue.h) to common/mlx5/linux directory.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Failsafe driver has been indicating zero for RSS redirection table size
after device info reporting had been reworked. Report proper value.
Fixes: 4586be3743 ("net/failsafe: fix reported device info")
Cc: stable@dpdk.org
Signed-off-by: Ian Dolzhansky <ian.dolzhansky@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Gaetan Rivet <grive@u256.net>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Currently, the DevX counter query works asynchronously with Devx
interrupt handler return the query result. When port closes, the
interrupt handler will be uninstalled and the Devx comp obj will
also be destroyed. Meanwhile the query is still not cancelled.
In this case, counter query may use the invalid Devx comp which
has been destroyed, and query failure with invalid FD will be
reported.
Adjust the shared interrupt install and uninstall timing to make
the counter asynchronous query stop before interrupt uninstall.
Fixes: f15db67df0 ("net/mlx5: accelerate DV flow counter query")
Cc: stable@dpdk.org
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
When secondary process starts, it will allocate its own process private
data, and also does remap to UAR register of the Tx queue. Once the
secondary process exits, these resources should be released accordingly.
And the shared resources owned by primary should not be touched.
Currently, once one port in the secondary process spawn failed, all the
other spawned ports will also be released during process exits. However,
the mlx5_dev_close() function does not add the cases for secondary
process, it means call the mlx5_dev_close() function directly in
secondary process releases the resources it should not touch.
Add the case for secondary process release to its own resources in
mlx5_dev_close() function to help it quits gracefully.
Fixes: 942d13e6e7 ("net/mlx5: fix sharing context destroy order")
Fixes: 3a8207423a ("net/mlx5: close all ports on remove")
Cc: stable@dpdk.org
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The mlx5_flow_validate_item_mpls function checks MPLS item validation.
It first checks if the device supports MPLS, it is done using the ifdef
condition that if it fails to skip to endif and return the appropriate
error.
When MPLS is supported, the preprocessor will copy the body of the
function ending with return 0 followed by the lines that report MPLS
support.
In fact, these lines are unreachable because before them the function
returns 0 and in any case they are unnecessary.
Replace the endif by else and move endif to the end of the
function.
Fixes: 23c1d42c71 ("net/mlx5: split flow validation to dedicated function")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The mlx5_txq_obj_new function defines a pointer named txq_data and
assign value into it. After assigning, the code writer is sure that the
variable does not point to NULL and even express it using assertion.
During the function, the function does dereferencing to the pointer
several times and at no point change its value. However, at the end of
the function at the error label when it wants to free one of the fields
of the structure that txq_data points to, it checks again whether
txq_data is invalid.
This check is unnecessary since it knows for sure that txq_data is
valid.
Remove the aforementioned needless check.
Fixes: 6449068818 ("net/mlx5: add free on completion queue")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The mlx5_pmd_socket_handle function calls the accept function that
returns the socket descriptor into the conn_sock variable. The socket
descriptor value can be 0 (according to accept API) or positive and so
immediately after calling the function it checks whether conn_sock < 0.
Later in the function when other things fail it jumps to the error label
and release previously allocated resources (such as socket or file).
During the resource release, it checks whether the variable conn_sock
containing the socket descriptor is positive and if it is, it releases
it. However, in this check it misses the case where conn_sock == 0, in
this case the socket will not be released and there will be a Resource
leak.
Extend the close condition for 0 value too.
Fixes: e6cdc54cc0 ("net/mlx5: add socket server for external tools")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
In the mlx5_pmd_socket_handle function it calls the recvmsg function
which returns the number of bytes read. The function assigns this return
value into a ret variable defined at the beginning of the function.
Similarly in the mlx5_pmd_socket_init function the it calls the socket
function which returns a file descriptor for the new socket. The
function also assigns this return value into a ret variable defined at
the beginning of the function.
In both functions they initialize the variable when defining it,
however, in both cases they do not use any ret variable before assigning
the return value from the function, so the initialization is
unnecessary.
Clean the aforementioned unnecessary initializations.
Fixes: e6cdc54cc0 ("net/mlx5: add socket server for external tools")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The mlx5_rxq_obj_hairpin_new function defines a pointer named tmpl and
allocates memory for it using the rte_zmalloc_socket function.
Later, this function allocates memory to a variable inside tmpl using
the mlx5_devx_cmd_create_rq function.
In both cases, if the allocation fails, the code jumps to the error
label and frees allocated resources. However, in the first jump there
are still no resources to free and the jump only for the line return
NULL is unnecessary. Even worse, when it jumps to error label with
invalid tmpl it actually does dereference to a null pointer.
In contrast, the second jump needs to free the tmpl variable but the
function instead of freeing, tries to free the variable that it just
failed to allocate.
In addition, for another error, the function returns NULL without
freeing the tmpl variable before, causing a memory leak.
Delete the error label and replace each jump with local return NULL and
free tmpl variable if needed.
Fixes: e79c9be915 ("net/mlx5: support Rx hairpin queues")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The mlx5_txq_obj_hairpin_new function defines a pointer named tmpl and
allocates memory for it using the rte_zmalloc_socket function.
Later, this function allocates memory to a variable inside tmpl using
the mlx5_devx_cmd_create_sq function.
In both cases, if the allocation fails, the code jumps to the error
label and frees allocated resources. However, in the first jump there
are still no resources to free and the jump only for the line return
NULL is unnecessary. Even worse, when it jumps to error label with
invalid tmpl it actually does dereference to a null pointer.
In contrast, the second jump needs to free the tmpl variable but the
function instead of freeing, tries to free the variable that it just
failed to allocate, and another variable that has never been allocated.
In addition, for another error, the function returns NULL without
freeing the tmpl variable before, causing a memory leak.
Delete the error label and replace each jump with local return NULL and
free tmpl variable if needed.
Fixes: ae18a1ae96 ("net/mlx5: support Tx hairpin queues")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The PCI DSN (device serial number) to format package file name should be
lowercase values.
Fixes: d1c91179e9 ("net/ice: check DSN package file firstly")
Cc: stable@dpdk.org
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
In the ingress path, the cfa_code field in Rx completion identifies the
CFA action rule that was used for the incoming packet. It is possible
that the packet could hit the rule at index 0 in the table.
The mark action code was too restrictive by disallowing a cfa_code of
zero.
This code loosens the requirement and allows zero.
Fixes: b87abb2e55 ("net/bnxt: support marking packet")
Cc: stable@dpdk.org
Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
When closing VF device, the process of shutdown adminq should be after
the process of uninit the flow, since the VF might still need to use the
adminq to uninit flow.
Fixes: 9e03acd726 ("net/iavf: fix flow access")
Fixes: ff2d0c345c ("net/iavf: support generic flow API")
Cc: stable@dpdk.org
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Because of bugs in driver or host a reply to a request might
never occur. Better to give an error than spin forever.
Fixes: 4e9c73e96e ("net/netvsc: add Hyper-V network device")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The original code would deadlock itself if a link change event
happened with link state interrupt enabled. The problem is that
the link state changed message would be seen while reading
the host to guest ring (under lock) and then the driver would
send a query to the host to see the new link state. The response
would never be seen (stuck in a while loop) waiting for the
response.
The solution is to use the link change indication to trigger
a DPDK alarm. The alarm will happen in a different thread and
in that context it can send request for new link state and
also do interrupt callback. This is similar to how the bonding
driver is handling the same thing.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
When the primary device link state is queried, there is no
need to query the VF state as well. The application only sees
the state of the synthetic device.
Fixes: dc7680e859 ("net/netvsc: support integrated VF")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The code to unset owner of VF device was changing port to invalid
value before calling unset.
Fixes: 4a9efcddad ("net/netvsc: fix VF support with secondary process")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The PMD_TX_LOG and PMD_RX_LOG can hide errors since this
debug log is typically disabled. Change the code to use
PMD_DRV_LOG for errors.
Under load, the ring buffer to the host can fill.
Add some statistics to estimate the impact and see other errors.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
These functions are useful for applications and debugging.
The netvsc PMD also transparently handles the rx/tx descriptor
functions for underlying VF device.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
There is not a lot of info here from this driver.
But worth supporting these additional info queries.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
We are freeing flow_stats a little early. This results in a
segfault when the driver accesses the members during cleanup.
Move the call to bnxt_free_flow_stats_info() to prevent this.
Fixes: 02a95625fe ("net/bnxt: add flow stats in extended stats")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
bnxt PMD uses the macro BNXT_SUPPORTED_SPEEDS to validate
the user requested speed. But this has all the speed values
supported by the PMD and is not chip specific.
The check against this macro returns success when the user
tries set the speed to 100G on a port even if the chip does
not support 100G speed.
Fixed it to use bnxt_get_speed_capabilities() to check the
supported speeds by the chip.
Fixes: 1d0704f4d7 ("net/bnxt: add device configure operation")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
When users set the length of RSS hash key greater than the supported
length by hardware, the driver should intercept and can not configure
the wrong key into the hardware.
Fixes: c37ca66f2b ("net/hns3: support RSS")
Cc: stable@dpdk.org
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Rx offload flag `DEV_RX_OFFLOAD_RSS_HASH` which can be used to
enable/disable PMDs write to `rte_mbuf:#️⃣:rss`. The hns3 PMD driver
already can notify the validity of `rte_mbuf:#️⃣rss` to the
application by enabling `PKT_RX_RSS_HASH` flag in `rte_mbuf::ol_flags`.
Fixes: 19a3ca4c99 ("net/hns3: add start/stop and configure operations")
Fixes: c37ca66f2b ("net/hns3: support RSS")
Cc: stable@dpdk.org
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Currently, when running testpmd application based on hns3 network engine
with csum fwd mode by "set fwd csum" command in the prompt line, sending
42 consecutive bytes of ARP packets to network port with packets
generator. But in fact hardware can't send the ARP packets and the
related logs as below:
"Preparing packet burst to failed: Invalid argument"
The hardware doesn't support transmit packets less than 60 bytes, and in
the '.tx_pkt_burst' ops implementation function named hns3_xmit_pkts
appending operation has been added for less than 60 bytes packets. So
the interception needs to be removed in the '.tx_pkt_prepare' ops
implementation function named hns3_prep_pkts.
Fixes: de620754a1 ("net/hns3: fix sending packets less than 60 bytes")
Fixes: bba6366983 ("net/hns3: support Rx/Tx and related operations")
Cc: stable@dpdk.org
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Currently, promiscuous mode configuration are not cleared during
uninstallation based on hns3 PF device. The residual entries may cause
unnecessary bandwidth usage.
So, we need clear the PF's promisc mode status during the uninit.
Fixes: a45fd0aa0e ("net/hns3: fix Rx queue search with broadcast packet")
Fixes: d51867db65 ("net/hns3: add initialization")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
In hns3 PMD driver, the vport id 0 denote PF, and the vport id 1 denote
the first VF device of the port.
This patch adds two macros named HNS3_PF_FUNC_ID and
HNS3_1ST_VF_FUNC_ID, and replaces this two numbers to improve code
readability.
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
When VFs configure the rss rule by virtchnl, it need to set bit mask
into the field selector for the protocol, then PF got the configure
massage and parse the field selector to the corresponding protocol
field.
Fixes: 7be10c3004 ("net/iavf: add RSS configuration for VF")
Cc: stable@dpdk.org
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Tested-by: Zhiwei He <zhiwei.he@intel.com>
The action number for switch filter should be 1, any
other such as 0 or more than 1 is invalid.
Fixes: 3428c6b6ec ("net/ice: add action number check for switch")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Tested-by: Qimai Xiao <qimaix.xiao@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The driver type need to be checked in private API.
Fixes: 50556c8810 ("net/ixgbe: fix MACsec setting")
Cc: stable@dpdk.org
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
When we flush flow FDIR, all queues are disabled for FDIR.
If FDIR rule is created again, then the flow list is empty,
as it is the first time to create rule after flush fdir filter,
so we need to enable FDIR for all queues.
And also, disable FDIR for queues should be done in function
i40e_flow_flush_fdir_filter().
Fixes: 1491f63c75 ("net/i40e: fix flush of flow director filter")
Fixes: 6ae9b2b5e8 ("net/i40e: cache flow director enable value in Rx queue")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Reviewed-by: Jeff Guo <jia.guo@intel.com>
Add invalid flow checking func in iavf generic flow to avoid the error
of "Cannot access memory at address 0xXXXXXX" occur.
When hash init, the default RSS rules would be added, while hash uninit,
the default RSS rules should be deleted. Add the missing part in the
hash uninit process.
Fixes: 5ea6142543 ("net/iavf: fix VF reset for RSS")
Fixes: ff2d0c345c ("net/iavf: support generic flow API")
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Base on HW, if a packet is split into multiple segments, the L2TAG
should only be valid on the last Rx descriptor. So fix it by setting
L2TAG into mbuf when processing the last split packet.
Fixes: c68a52b8b3 ("net/ice: support vector SSE in Rx")
Cc: stable@dpdk.org
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Base on HW, if a packet is split into multiple segments, the L2TAG
should only be valid on the last Rx descriptor. So fix it by setting
L2TAG into mbuf when processing the last split packet.
Fixes: 319c421f38 ("net/avf: enable SSE Rx Tx")
Cc: stable@dpdk.org
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Base on HW, if a packet is split into multiple segments, the L2TAG
should only be valid on the last Rx descriptor. So fix it by setting
L2TAG into mbuf when processing the last split packet.
Fixes: ca74903b75 ("net/i40e: extract non-x86 specific code from vector driver")
Cc: stable@dpdk.org
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Recent patch exposed a minor performance issue,
so it is reverted.
Fixes: d237d22fbe ("net/mlx5: prefer DevX API to create Rx objects")
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
When user requests a filter deletion only filter with
manual priority must be deleted. When an automatic filter has
the same specification, it must be skipped.
Fixes: 585c22edb2 ("net/sfc/base: handle manual and auto filter clashes in EF10")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
When TSO MSS is smaller than 80, and the sum length of continuous
sge num is larger than a MSS, which may cause hardware failed,
so in this scenarios pmd driver should adjust the tso_segsz with
the same with the value of hardware supported.
Fixes: 076221c8fe ("net/hinic: add Rx/Tx")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
The elt_size field in mempool holds the size of one packet buffer.
It can be used to set the lpm_sizem1 field in rq context.
The lpb_sizem1 field in rq context is 12 bit, direct assignment
to it was causing overflow of value. Because of this errors
were observed while trying inline inbound with large packets.
This patch resolves the errors.
Fixes: 094fc8a3a1 ("net/octeontx2: add Rx queue setup and release")
Cc: stable@dpdk.org
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Reviewed-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
When a queue is started after deferred_start, then increment raw_prod
irrespective of new mbuf is allocated or old mbufs are used.
Fixes: d256c73c11 ("net/bnxt: fix memory leak during queue restart")
Cc: stable@dpdk.org
Signed-off-by: Rahul Gupta <rahul.gupta@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
FDIR ID parsing will not be handled correctly after queue reconfigured,
enable FDIR ID parsing per Q regardless of fdir_ref_cnt to fix it.
Fixes: f71dbf852d ("net/iavf: add flow director enabled switch value")
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Use a common function when selecting the proper word and mask match for
a tunnel type when programming switch rules.
Store switch recipe field mask as little endian, which avoids needing to
convert back to big endian after reading recipe from FW.
Obtain word mask from FW recipe.
Fix word matching element and index pairing.
Fixes: fed0c5ca5f ("net/ice/base: support programming a new switch recipe")
Cc: stable@dpdk.org
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
GCC 10 is detecting the enum mismatch when assigning UDP variables
with MUSDK constants for TCP.
drivers/net/mvpp2/mrvl_flow.c:2521:47: error: implicit conversion
from 'enum mv_net_tcp_fields' to 'enum mv_net_udp_fields'
[-Werror=enum-conversion]
An assigned field is also fixed from "tcp" to "udp".
Fixes: 7235341d75 ("net/mrvl: support classifier")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Liron Himi <lironh@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
There is no point in having non-static (and non-extern) inline
functions.
Also this breaks the build for the ICC [1] because of the 'internal'
symbol check.
When function is 'inline' ICC is ignoring 'section' attribute and not
putting function to 'internal' section which breaks 'check-symbols.sh'
script with below error.
[1]
qbman_swp_dqrr_next is not flagged as internal
but is listed in version map
Please add __rte_internal to the definition of qbman_swp_dqrr_next
qbman_swp_enqueue_multiple is not flagged as internal
but is listed in version map
Please add __rte_internal to the definition of qbman_swp_enqueue_multiple
qbman_swp_enqueue_multiple_desc is not flagged as internal
but is listed in version map
Please add __rte_internal to the definition of qbman_swp_enqueue_multiple_desc
qbman_swp_enqueue_multiple_fd is not flagged as internal
but is listed in version map
Please add __rte_internal to the definition of qbman_swp_enqueue_multiple_fd
qbman_swp_pull is not flagged as internal
but is listed in version map
Please add __rte_internal to the definition of qbman_swp_pull
qbman_swp_release is not flagged as internal
but is listed in version map
Please add __rte_internal to the definition of qbman_swp_release
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Since there are some default rss configure in kernel PF/VF but not DPDK
IAVF, if these configurations be modified by VF and then VF reset, this
default rss configurations can not be reset to default by IAVF. So need
to add default rss set in IAVF hash initial process.
Fixes: 7be10c3004 ("net/iavf: add RSS configuration for VF")
Cc: stable@dpdk.org
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Tested-by: Zhiwei He <zhiwei.he@intel.com>
There should have different behavior in queue start fail and stop fail
case. When queue start fail, all the next actions should be terminated
and then started queues should be cleared. But for queue stop stage, one
queue stop fail should not end other queues stop. This patch fixed that
issue in PF and VF.
Fixes: b6583ee402 ("i40e: full VMDQ pools support")
Fixes: 3f6a696f10 ("i40evf: queue start and stop")
Cc: stable@dpdk.org
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
All supported pattern for GTPU include extend header:
pattern_eth_ipv4_gtpu_eh_ipv4
pattern_eth_ipv4_gtpu_eh_ipv4_udp
pattern_eth_ipv4_gtpu_eh_ipv4_tcp
So the RSS rule should only take effect on GTPU packet that contains
extend header. The patch fix above issue and also allow inner l4 port
as input set.
Fixes: c08a72c79c ("net/ice: fix pattern name of GTPU with extension header")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Tested-by: Simei Su <simei.su@intel.com>
In i40e PMD code of function i40e_res_pool_free(), if valid_entry
is freed by "rte_free(valid_entry);" in the code, then the following
code for pool update may still use the wild pointer "valid_entry"
for pool info update. It seems has the risk of core dump for
using wild pointer operation, we should avoid this risk.
Fixes: 4861cde461 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Reviewed-by: Jeff Guo <jia.guo@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Add device arguments to lock NPA aura and pool contexts in NDC cache.
The device args take hexadecimal bitmask where each bit represent the
corresponding aura/pool id.
Example:
-w 0002:02:00.0,npa_lock_mask=0xf // Lock first 4 aura/pool ctx
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Even when a PMD was disabled with meson's disable_drivers option
its config file was still being parsed. Some of the PMD configs
attempt to find a library they depend on and parse its header files
with certain assumptions. If the library is found, but it's simply
too old to contain the necessary header files, the meson build
fails and it can only be fixed by either updating that library, or
expanding the meson script for the faulty PMD.
While the latter should be still done for the sake of DPDK quality,
an intermediate solution would be to skip building the faulty PMD
- there's a chance we don't need it. That's what this patch allows.
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Removed the typing error in doc/guides/eventdevs/index.rst,
drivers/net/mlx5/mlx5.c and in lib/librte_vhost/rte_vhost.h
Bugzilla ID: 477
Fixes: 0857b94211 ("doc: add event device and software eventdev")
Fixes: 039253166a ("vhost: add device op when notification to guest is sent")
Fixes: ad74bc6195 ("net/mlx5: support multiport IB device during probing")
Cc: stable@dpdk.org
Signed-off-by: Muhammad Bilal <m.bilal@emumba.com>
rte_dpaa2_memsegs is not being used by any other library
or even within bus.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Currently rte_mcp_ptr_list is being shared as a variable
across libs. This is only used in control path.
This patch change it to a exported function based access.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
This patch changes the export of fman port config
as function call instead of direct variable access.
This is in control path, so it will not impact perf.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
This is to reduce the number of variables getting exposed
from the dpaa bus. They are not required to be in bus.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
qman caam and pool portal ids are only used in control
path. This patch changes their inter library access to
function call instead of direct shared variable.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
rte_dpaa2_mempool.h header was missed to be added in meson.build
for header installation.
Fixes: 7ed3599095 ("mempool/dpaa2: add functions for CMDIF")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
This patch moves the internal symbols to INTERNAL sections
so that any change in them is not reported as ABI breakage.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
This patch moves the internal symbols to INTERNAL sections
so that any change in them is not reported as ABI breakage.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
This patch moves the internal symbols to INTERNAL sections
so that any change in them is not reported as ABI breakage.
This patch also removes two symbols, which are not to be exported.
rte_dpaa_mem_ptov - static inline in the headerfile
fman_ccsr_map_fd - local shared variable.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
This patch moves the internal symbols to INTERNAL sections
so that any change in them is not reported as ABI breakage.
This patch also removes two symbols, which were not used
anywhere else i.e. rte_fslmc_vfio_dmamap & dpaa2_get_qbman_swp
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
This patch moves the internal symbols to INTERNAL sections
so that any change in them is not reported as ABI breakage.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Clarify Intel copyright and update the date to 2020.
Fixes: 8cb7c57d9b ("net/igc: support device initialization")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Clarify Intel copyright and update the date to 2020.
Fixes: 317862a4e4 ("net/iavf: replace license text with SPDX tag")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Clarify Intel copyright and update the date to 2020.
Fixes: 547be3f01f ("net/i40e/base: replace license text with SPDX tag")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Clarify Intel copyright and update the date to 2020.
Fixes: 9db3087f4f ("net/ixgbe/base: update the license")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
After memory optimization, the organization of some resources are
changed from pointer based LIST to the index based ILIST. A lot of
code parts are touched due to such change.
Some static code checking and analysis tool will complain and raise
a false warning on the uninitialized value using. E.g. in the port
action registering function, the stack variable will be used as the
right value with some uninitialized field to initialize variable
allocated from heap. But indeed, it is not an error because all the
fields set with the uninitialized value will be overwritten in the
following code part and the macros. All the fields will be used as
the left value explicitly.
It makes no sense to clear the stack variable to 0 in this case,
and the extra memset will introduce some cycles overhead. It just
needs to ignore the false warning from the tool, if any.
Fixes: f3faf9ea11 ("net/mlx5: convert port id action to indexed")
Signed-off-by: Bing Zhao <bingz@mellanox.com>
Reviewed-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
After memory optimization, some action object handles are changed to
index to save the overhead. Assertion in debug mode will be helpful
for trouble shooting.
In the current implementation, only one port action is supported in
switchdev mode for one device flow. In debug mode, an assertion will
be used to check the if the port action is none, and it should
locate before the port action resource registration but not after
it. The action index in the handle should be 0 before registration.
Or else it will always cause a failure because the port action is
registered and the index is not 0.
Fixes: f3faf9ea11 ("net/mlx5: convert port id action to indexed")
Signed-off-by: Bing Zhao <bingz@mellanox.com>
Reviewed-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The buffer size to receive netlink reply messages is relatively
large (32K), and it is allocated on the stack and it might
break in application is using smaller per-thread stacks.
This patch allocates temporary buffer from heap.
Fixes: ccdcba53a3 ("net/mlx5: use Netlink to add/remove MAC addresses")
Cc: stable@dpdk.org
Reported-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The MLX5 device supports up to MLX5_MAX_MAC_ADDRESSES (256) MAC
addresses. The code flushes all MAC devices.
If DPDK is compiled with MLX5_DEBUG this would an assert.
PANIC in mlx5_nl_mac_addr_flush():
line 775 assert "(size_t)(i) < sizeof(mac_own) * 8" failed
The root cause is that mac_own is a pointer and is being used as
a bitmap array. The sizeof(mac_own) would therefore be 64 but the
number of entries to be flushed would be 256.
There is a whole set of asserts in MLX5 netlink code with
the same bug; that should just be changed into proper error checks.
Fixes: 8e46d4e18f ("common/mlx5: improve assert control")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Currently, the shared counter search uses the wrong nested index which
is used by the pool index. The incorrect nested index using causes the
search go to incorrect counter pool is not existed.
Add the counter index to fix the incorrect nested use case.
Fixes: 4001d7ad26 ("net/mlx5: change Direct Verbs counter to indexed")
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The doorbell record is organized with page and bitmap. When some new
doorbell needs to be associated with a queue, the bit will be set
in the bitmap to indicate the corresponding doorbell occupied. A
counter is used to record the number of doorbell occupied to speed
up the searching.
If the number reaches the maximal value of a pre-defined number of a
page, a new page will be allocated. If not, then the bitmap will be
checked to find a free one.
The LSHIFT and OR (AND NOT) operations are used to update the bitmap
of a page. But 1 will be treated as a signed integer when compiling.
When the shift number is 31, the shifted value will be considered as
negative. Then a wrong extension will be done when setting it to a
64-bits variable. All the upper 32-bits will be set to 1 by such
extension.
Then a wrong offset value will be calculated because of this. The
next 64 bits will be also treated as the bitmap and get corrupted
through the bit set operation.
The immediate value 1 needs to be used as 64 bits width explicitly.
Fixes: 21cae8580f ("net/mlx5: allocate door-bells via DevX")
Cc: stable@dpdk.org
Signed-off-by: Bing Zhao <bingz@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
When create the Verbs flows with counter, randomly SEGSEV will also
comes. The reason is that the counter pool memory is not allocated
sufficiently and initialized correctly in Verbs case.
As the mlx5_flow_counter array member is moved out of the counter pool
struct, the counter pool memory layout currently contain implicitly
with mlx5_flow_counter, mlx5_age_param(if the pool is an age pool),
mlx5_flow_counter_ext(if the pool is a none batch pool). When allocate
the pool memory, the pool size should be calculated based on the pool
type accordingly.
Currently, for Verbs counter pool, both mlx5_flow_counter and
mlx5_flow_counter_ext need to be taken into account in the pool size.
And the pool type should also be initialized as CNT_POOL_TYPE_EXT.
This patch add the missing size and type for the Verbs counter pool.
Fixes: 8d93c830e4 ("net/mlx5: modify ext-counter memory allocation")
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
CVL kernel PF configures all reserved queues for VF, including
Rx queue RXDID. The number of reserved queues is the maximum
between Tx and Rx queues. If the number of the enabled Rx queues
is less than that of reserved queues, required RXDID will only
be set for those enabled, but default value (0) is set for others.
However, RXDID 0 (legacy 16byte descriptor) is not supported now,
PF will return error when configuring those disabled VF queues.
In this patch, required RXDID is set for all reserved Rx queues,
no matter enabled or not. In this way, PF will configure Rx
queues correctly without reporting error.
Fixes: b8b4c54ef9 ("net/iavf: support flexible Rx descriptor in normal path")
Signed-off-by: Ting Xu <ting.xu@intel.com>
Tested-by: Xiaoxiao Zeng <xiaoxiaox.zeng@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
This patch fixes the issue that the queue region does not
take effect due to incorrectly setting the flow type.
Fixes: ecad87d223 ("net/i40e: move RSS to flow API")
Cc: stable@dpdk.org
Signed-off-by: Shougang Wang <shougangx.wang@intel.com>
Reviewed-by: Jeff Guo <jia.guo@intel.com>
Tested-by: Hailin Xu <hailinx.xu@intel.com>
Tested-by: Lunyuan Cui <lunyuanx.cui@intel.com>
This patch adds support for FDIR passthrough mode. When FDIR rule
hits, FDIR just forward this packet to the next stage filter.
Fixes: 55daca4e45 ("net/ice/base: change function to static")
Signed-off-by: Simei Su <simei.su@intel.com>
Tested-by: Xiaoxiao Zeng <xiaoxiaox.zeng@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Fix to allocate bnxt ulp context when TRUFLOW is enabled.
This patch reduces the size of struct bnxt.
Fixes: 313ac35ac7 ("net/bnxt: support ULP session manager init")
Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We are maintaining MAC address twice which is unnecessary.
This patch removes the copy which helps reduce size of bnxt structure.
Fixes: b7778e8a1c ("net/bnxt: refactor to properly allocate resources for PF/VF")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
There is no need to maintain local copy.
This helps reduce the size of the bnxt structure.
Fixes: fcc0aa1edc ("net/bnxt: add RSS hash configuration")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Consolidate flow stat related structs for performance improvement.
The intention of this patch is to reduce the size struct bnxt which
had grown because of recent changes and was impacting performance.
Fixes: 02a95625fe ("net/bnxt: add flow stats in extended stats")
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Log the command sequence number to aid debug in case of a
FW command timeout.
Fixes: 804e746c7b ("net/bnxt: add hardware resource manager init code")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
This patch fixes deallocation of all fastpath resources unconditionally,
when re-configuring the device. When re-allocating resources PMD depends
on application to explicitly setup the Rx/Tx queue.
Deallocation of all the resources is only required if the Rx/Tx queue
configuration changes. For other scenarios like KNI MTU change we'd keep
existing configuration.
Fixes: 8de0c42019 ("net/qede: fix odd number of queues usage in 100G mode")
Fixes: dd28bc8c6e ("net/qede: fix VF port creation sequence")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Fix to assign dummy Rx/Tx handlers in dev_stop.
For MTU set, assignment of the appropriate Rx/Tx handlers will be
handled by dev_start/dev_stop.
Fixes: 81f8804992 ("net/qede: enhance Rx CPU utilization")
Fixes: 8de0c42019 ("net/qede: fix odd number of queues usage in 100G mode")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Event notification should be disabled after virtqueue initialization and
enabled by calling rte_eth_dev_rx_intr_enable later. When virtio user
device reconnecting to vhost, virtqueue_disable_intr should be called to
disable event notification.
Fixes: 6ebbf4109f ("net/virtio-user: fix packed ring server mode")
Cc: stable@dpdk.org
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Acked-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Runtime checks for vectorized datapath are organized into device
configuration function. Remove duplicated check in device init
function.
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Before updating RSS indirection table, firstly determine whether
rq num in RETA table is legal, if it is invalid(such as exceeding
the maximum rxq num), driver will not update hw indirection
table and return fail.
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
The patch modifies the comments of structures or functions, and adds
space for comments, removes extra empty lines and adjusts the
print level for VF branches in one sdk interface.
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
When copy a mbuf to a new dst_mbuf, the pkt_len member of
dst_mbuf needs to be updated.
Fixes: 076221c8fe ("net/hinic: add Rx/Tx")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
Adds tx_queues and rx_queues non-null judgment before free tx or
rx resources, because some app may set tx_queues or rx_queues to
be null before call free resource interfaces, which may cause
a segfault.
Fixes: 64727024d2 ("net/hinic: add device initialization")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
The VMXNet3 protocol has a start-of-packet (SOP) and end-of-packet (EOP)
marker. If there was a bug where mbuf arrived without SOP the code that
chains the mbuf would dereference a null pointer.
Also, record any mbuf's dropped in statistics.
Although did the initial code no longer have access to VMware.
Compile tested only!
Coverity issue: 124563
Fixes: 8ee787ce80 ("vmxnet3: remove asserts that confuse coverity")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Yong Wang <yongwang@vmware.com>
Previous patch added support of VLAN item without VLAN ID value,
i.e. using wildcard VLAN item, to match VLAN with any VLAN ID.
The implication on VLAN actions was not taken into consideration.
VLAN actions (e.g. push vlan) use the VLAN ID value in the VLAN item,
and expect it to be valid.
This patch updates function flow_dev_get_vlan_info_from_items() to
check the VLAN item contents before trying to use it.
Fixes: 92818d839e ("net/mlx5: fix match on empty VLAN item in DV mode")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The design of counter container resize used double buffer algorithm in
order to synchronize between the query thread to the control thread.
When the control thread detected resize need, it created new bigger
buffer for the counter pools in a new container and change the container
index atomically.
In case the query thread had not detect the previous resize before a new
one need was detected by the control thread, the control thread returned
EAGAIN to the flow creation API used a COUNT action.
The rte_flow API doesn't allow unblocked commands and doesn't expect to
get EAGAIN error type.
So, when a lot of flows were created between 2 different periodic
queries, 2 different resizes might try to be created and caused EAGAIN
error.
This behavior may blame flow creations.
Change the synchronization way to use lock instead of double buffer
algorithm.
The critical section of this lock is very small, so flow insertion
rate should not be decreased.
Fixes: ebbac312e4 ("net/mlx5: resize a full counter container")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Move link state enable/disable to dev_start() and dev_stop()
respectively. This will ensure when devices are stopped,
link status will be appropriately shown as down.
Fixes: dd28bc8c6e ("net/qede: fix VF port creation sequence")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
This patch fixes the issue that failed to create an RSS rule with type
L2-payload.
Fixes: feaae285b3 ("net/i40e: support hash configuration in RSS flow")
Signed-off-by: Shougang Wang <shougangx.wang@intel.com>
Tested-by: Hailin Xu <hailinx.xu@intel.com>
Reviewed-by: Jeff Guo <jia.guo@intel.com>
When configure RSS rule, the etherdev rss hash function type should be
mapped to the corresponding virtchnl rss algorithm type.
Fixes: 7be10c3004 ("net/iavf: add RSS configuration for VF")
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
A typo need to be fixed for Simple XOR algorithm configuration.
Fixes: 57094d5943 ("common/iavf: support advanced RSS input set change")
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
When the driver is loaded on a 200G NIC, the port speed is not
displayed correctly. Parse the 200G speed before displaying it.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Relaxed ordering is a PCI optimization that enables reordering
reads/writes in order to improve performance.
Relaxed ordering was enabled for all processors causing
a degradation in performance in Haswell and Broadwell processors
that don't support this optimization.
In order to avoid that we check if the processor is Haswell
or Broadwell and if so we disable relaxed ordering.
Signed-off-by: Shiri Kuzin <shirik@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
In order to improve performance relaxed ordering was enabled
when creating count object using Devx.
Currently rte enables this optimization by default when using
Devx.
This causes an issue when using firmware that does not have this
capability causing a count object failure.
In order to fix this issue a check of firmware capabilities was
added before enabling relaxed ordering.
Fixes: 53ac93f71a ("net/mlx5: create relaxed ordering memory regions")
Signed-off-by: Shiri Kuzin <shirik@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Relaxed ordering is a PCI optimization that allows reordering
of reads/writes in order to improve performance.
In order to enable this optimization only when relaxed ordering
is supported, it is checked if IBV_ACCESS_RELAXED_ORDERING is
defined in verbs.h.
Since IBV_ACCESS_RELAXED_ORDERING is an enum and not
defined relaxed ordering wasn't enabled even when supported.
This issue is fixed by using AUTOCONF to check if relaxed
ordering is supported and disabling only if it isn't.
Fixes: 53ac93f71a ("net/mlx5: create relaxed ordering memory regions")
Signed-off-by: Shiri Kuzin <shirik@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
This patch fixes the issue that the flow which both source MAC mask
and destination MAC mask are all zeros can not be created.
Fixes: ea0c22fd82 ("net/i40e: enable MAC address as flow director input set")
Signed-off-by: Shougang Wang <shougangx.wang@intel.com>
Tested-by: Hailin Xu <hailinx.xu@intel.com>
Reviewed-by: Jeff Guo <jia.guo@intel.com>
The register autoneg can't be updated synchronously with flow control
mode setting in the state of port start, so NIC statistics error occurs.
AUTO_NEG Advt register should be updated by ixgbe_setup_fc() when
enabling flow control.
The patch fixes the issue.
Fixes: a524f550da ("net/ixgbe: fix flow control mode setting")
Cc: stable@dpdk.org
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
The value MLX5_WQE_BUF_ALIGNMENT is defined as 512.
In some cases this alignment size is not adequate, which results in
memory registration that is not accepted by FW.
The result error can be "page_offset is not aligned to page_size/64,
bad umem_offset" (syndrome 0x357275).
This patch updates the definition to match the running system.
Fixes: 18a68e046b ("net/mlx5: fix DevX Rx queue memory alignment")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Currently, DevX API is used to create Rx objects (RQ, RQT, TIR) only
if LRO or hairpin features are enabled on this RQ.
This patch uses DevX API by default, if DevX is supported and can be
used. Otherwise, Verbs API is used.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
File mlx5_devx_cmds.c should contain pure DevX calls. It must be OS
agnostic and not include any references to ibv or dv structs (defined in
ibverbs and rdma-core linux libraries). This commit replaces all ibv
and dv references with 'void *'. Specifically, the following struct
were replaced:
1. struct ibv_context *
2. struct ibv_qp *
3. struct mlx5dv_devx_cmd_comp *
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Move mlx5 symbols in the map file to the INTERNAL section and add
__internal tags to their definitions.
Those symbols were exported in 20.02 and now (20.05) they are removed.
Avoid ABI comparison issues between 20.05/20.08 and 20.02 by adding the
suppress_file directive to libabigail.abignore file. This directive will
prevent loading mlx5 common symbols and no comparison will be performed.
In addition move symbols from the EXPERIMENTAL section to the INTERNAL
section.
Fixes: 7b4f1e6bd3 ("common/mlx5: introduce common library")
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Fix coverity defects of unused value.
Coverity issue: 357745, 357769
Fixes: b8b4c54ef9 ("net/iavf: support flexible Rx descriptor in normal path")
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Fix some out-of-bounds memory issues, they may lead to wrong results
or affect application stability.
Coverity issue: 357759, 357713
Fixes: bd3fcf0d0f ("net/igc: support RSS")
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Reviewed-by: Jeff Guo <jia.guo@intel.com>
Move the internal symbols to INTERNAL sections so that any
change in them is not reported as ABI breakage.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Move the internal symbols to INTERNAL sections so that any
change in them is not reported as ABI breakage.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Since it will check the feature mask before running out-of-place
test cases and the virtio-crypto device supports OOP_LB_IN_LB_OUT mode.
Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com>
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
The OCTEON TX crypto PMD supports non-byte aligned data as
input for SNOW and ZUC algos. Adding the same to the feature list.
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Session configure should return -ENOTSUP in case of unsupported xform
requests. Moving the validation of combinations out of cpt, as the
feature support will not be same across OCTEON TX and OCTEON TX2.
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
The OCTEON TX2 crypto PMD supports non-byte aligned data as
input for SNOW and ZUC algos. Adding the same to the feature list.
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Update max packet length supported by Inline IPsec Rx to
NIX_MAX_FRS
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
The caam_jr_enable_irqs() and caam_jr_disable_irqs() methods maybe return a
negative error. So use int instead of uint32_t int the functions.
Fixes: e7a45f3cc2 ("crypto/caam_jr: add UIO specific operations")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Gagandeep Singh <g.singh@nxp.com>
Zero is a valid fd. It will fail to check the fd if the fd is zero.
The "job_ring->uio_fd" is an fd, so define it as "int".
Fixes: e7a45f3cc2 ("crypto/caam_jr: add UIO specific operations")
Fixes: a5e1018d5e ("crypto/caam_jr: add routines to configure HW")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Gagandeep Singh <g.singh@nxp.com>
gcc 10 defaults to -fno-common and as a result when linking
with crypto drivers:
drivers/librte_pmd_dpaa_sec.a(crypto_dpaa_sec_dpaa_sec.c.o):
(.bss+0x4): multiple definition of `rta_sec_era';
drivers/librte_pmd_caam_jr.a(crypto_caam_jr_caam_jr.c.o):
(.bss+0x0): first defined here
drivers/librte_pmd_dpaa2_sec.a(crypto_dpaa2_sec_dpaa2_sec_dpseci.c.o):
(.data+0x0): multiple definition of `rta_sec_era';
drivers/librte_pmd_caam_jr.a(crypto_caam_jr_caam_jr.c.o):
(.bss+0x0): first defined here
This patch fixes the blunt workaround in the following commit.
Fixes: 50b03f3b8e ("drivers/crypto: disable gcc 10 no-common errors")
Bugzilla ID: 469
Cc: stable@dpdk.org
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Tested-by: Kevin Traynor <ktraynor@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
The returned number from rte_event_enqueue_*()
wouldn't include events marked with RTE_EVENT_OP_RELEASE.
Fixes: 1c8e3caa3 ("event/dsw: add event scheduling and device start/stop")
Cc: stable@dpdk.org
Signed-off-by: Yuri Chipchev <yuric@marvell.com>
Reviewed-by: Liron Himi <lironh@marvell.com>
Acked-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
The AVX512 packed ring datapath selection was only done
at build time, but it should also be checked at runtime
that the CPU supports it.
This patch add a CPU flags check so that non-vectorized
path is selected at runtime if AVX512 is not supported.
Also in meson build enable vectorization only for relevant file, not for
all driver.
Fixes: ccb10995c2 ("net/virtio: add election for vectorized path")
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
If hardware mode for this card does not support nic,
the network features for this card will not be supported
and driver will be initialized failed.
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
This patch adds to MLX5 PMD the support of matching on
GTP header item v_pt_rsv_flags.
This item is contained in 1 byte of the format:
-------------------------------------------
| bit | 0 - 2 | 3 | 4 | 5 | 6 | 7 |
|-----------------------------------------|
| value | Version | PT | Res | E | S | PN |
-------------------------------------------
Matching is supported only for GTP flags E, S, PN.
Therefore values 0 to 7 are supported.
Mask must be set accordingly:
... gtp v_pt_rsv_flags is 1 v_pt_rsv_flags mask 0x07 ...
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Program received signal SIGSEGV, Segmentation fault.
0x00000000008ef7c4 in mlx5_tx_queue_release (dpdk_txq=0x17ce01680) at
drivers/net/mlx5/mlx5_txq.c:302
301 mlx5_txq_release(ETH_DEV(priv), i);
302 DRV_LOG(DEBUG, "port %u removing Tx queue %u from list",
303 PORT_ID(priv), txq->idx);
The problem is txq is freed inside the mlx5_txq_release() function
and no longer valid in the debug log right after this invocation.
Move the debug log before the mlx5_txq_release() function to fix this.
Fixes: a6d83b6a92 ("net/mlx5: standardize on negative errno values")
Cc: stable@dpdk.org
Signed-off-by: Alexander Kozyrev <akozyrev@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The function mlx4_drop_get() creates pointer to a struct mlx4_drop and
if needed allocates by rte_malloc.
If the allocation is failed the function goes to label “error”, and
there does dereference to a null pointer.
Skip resources cleaning when the memory allocation is failed.
Coverity issue: 146206
Coverity issue: 146146
Fixes: d3a7e09234 ("net/mlx4: allocate drop flow resources on demand")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The mlx5_flow_get_reg_id() function translates tag ID to register
from the registers that are supported and available for use. The
user does not know which register is available at a time and therefore
there is an array that represents mapping to the available registers.
Usually the free registers are continuous in the flow_mreg_c array but
sometimes the mtr_color_reg register is between them and it must be
skipped and the next register returned, in which case the function
returns the mapping of the next entity in the array.
When the function reads from the next entity in the array, it does not
check whether such an entity exists and in some situation invalid access
to memory occurs beyond the array boundaries.
So, when all the registers are valid from HW perspective and the meter
color register is not the default, the tag id 5 causes an out of bound
access.
Validate registers availability when meter color register is not the
default.
Coverity issue: 146355
Fixes: 792e749e92 ("net/mlx5: fix register usage in meter")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
When creating flow rule with zero specs it will cause
matching all UDP packets like following:
eth / ipv4 / udp / vxlan / end
Such rule will match all udp packets.
This change the behavior to match the dv flow engine
which will automatically set the match on relative
outer UDP port if the user didn't specify any.
Fixes: 84c406e745 ("net/mlx5: add flow translate function")
Cc: stable@dpdk.org
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
In existing implementation, using wild card VLAN item is not allowed.
A VLAN item in flow pattern must include VLAN ID (vid) value.
This obligation contradict the flow API specification [1].
This patch updates the VLAN item validation and translation, to allow
wild card VLAN item, without VLAN ID value.
User guide and release notes are updated accordingly.
[1]
commit 40513808b165 ("doc: refine ethernet and VLAN flow rule items")
Fixes: 00f75a4057 ("net/mlx5: fix VLAN match for DV mode")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
When a net_ring device is allocated, its device pointer is not set
before calling rte_eth_dev_probing_finish, which is incorrect.
The following:
commit 96cb195211 ("net/ring: use EAL APIs in PMD specific API")
commit a6992e9610 ("net/ring: set ethernet device field")
already fixed the same issue in 17.08, which was fine at the time.
Adding the hook rte_eth_dev_probing_finish() however created this bug,
as the eth_dev exposed when this hook is executed is expected to be
complete.
Remove the prior attempts to fix the issue in rte_pmd_ring_probe() and
write the pointer properly in do_eth_dev_ring_create().
Fixes: fbe90cdd77 ("ethdev: add probing finish function")
Cc: stable@dpdk.org
Signed-off-by: Gaetan Rivet <grive@u256.net>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
When trying to compile with glibc < 2.24 that doesn't
support SOL_NETLINK it will cause compilation failure:
drivers/net/tap/tap_netlink.c:70:17: error:
'SOL_NETLINK' undeclared (first use in this function)
setsockopt(fd, SOL_NETLINK, NETLINK_EXT_ACK, &one, sizeof(one));
The glibc commits adds the SOL_NETLINK support:
https://github.com/bminor/glibc/commit/f9b437d5efce93800b51ad2a437c8b1c9
Fixes: 647909bcf3 ("net/tap: use netlink extended ack support")
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
NIX exposes NIX_AF_SMQ(0..511)_CFG to configure minimum length
of the packet which is being used for zero padding if packet is
less than configured value.
Setting it to default minimum length i.e. 60 bytes.
Fixes: ec8ddd4fb1 ("net/octeontx2: restructure TM helper functions")
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add Rx descriptor limit for number of segments per MTU.
PMD doesn't support Jumbo Rx scatter gather hence set 1 segment per
MTU. Some applications can adjust mbuf_size based on this value.
For others PMD detects the condition where Rx packet length cannot
be held by configured mbuf size and logs the message.
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Some log will always be printed when the device is initialized
and shut down, which will mislead users and should be removed.
Fixes: 746664d546 ("net/igc: support flow API")
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
The dummy packet for pppoe-ipv6 has an error, we should
use 0x3b for next header in ipv6 header in the dummy packet,
or some case can not be download, such as:
"eth / pppoes seid is 3 / pppoe_proto_id is 0x0057 /
end actions vf id 1 / end"
Fixes: 55d61fb27a ("net/ice/base: add PPPoE IPv6 dummy packet")
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Tested-by: Nannan Lu <nannan.lu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When processing a rte flow, such as creating a parse engine, or
creating or destroying a RSS rule, if they are failed, they all
need to construct the flow error structure before return the error
message back to app. If not so, it will cause app crash when
app printing the message out of a flow error.
Fixes: 7be10c3004 ("net/iavf: add RSS configuration for VF")
Fixes: ff2d0c345c ("net/iavf: support generic flow API")
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
In ixgbe_dev_link_update_share(), if the media type is fiber and the
link is down, a flag (IXGBE_FLAG_NEED_LINK_CONFIG) is set. A callback
to ixgbe_dev_setup_link_thread_handler() is scheduled which should
try to set up the link and clear the flag afterwards. This flag works
as a guard variable between threads.
To avoid potential race condition between threads, set the
IXGBE_FLAG_NEED_LINK_CONFIG flag only when there is no link thread
running.
Bugzilla ID: 388
Fixes: 819d0d1d57 ("net/ixgbe: fix blocking system events")
Cc: stable@dpdk.org
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Lijian Zhang <lijian.zhang@arm.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Since some specific RSS hash type need to combine with the protocol
hash type when configure a RSS hash rule, so add the corresponding
input set to support these case for iavf hash.
Fixes: 7be10c3004 ("net/iavf: add RSS configuration for VF")
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Correct the qman_fq_desc as per the HW defined size
Fixes: 6fef517e17 ("bus/fslmc: add qman HW fq query count API")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
When using a single TC, flow id is same as congestion group id.
However in case of multiple traffic classes, same flow id values
are used within each traffic class, which causes incorrect
traffic behavior e.g. halting of traffic.
This patches changes to use the cgid as the index which works
for single as well as multiple traffic classes.
Fixes: 13b856ac02 ("net/dpaa2: support taildrop on frame count basis")
Cc: stable@dpdk.org
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This change adds DPDMUX support to bifurcate traffic on
the basis of UDP destination port.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Update the portal allocation failure log to print the thread id
as well.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch adds default/preferred rx/tx params in dev info,
specially the advertised burst size.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
