d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
2a58b312b6
freebsd-dev/sys/conf/files.powerpc

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

386 lines
18 KiB
Plaintext
Raw Normal View History

The final commit for the first phase of PowerPC support. This adds the config stuff needed to build kernels. Reviewed by: obrien
2001-06-17 09:39:44 +00:00
# This file tells config what files go into building a kernel,
# files marked standard are always included.
#
# $FreeBSD$
#
# The long compile-with and dependency lines are required because of
# limitations in config: backslash-newline doesn't work in strings, and
# dependency lines other than the first are silently ignored.
#
#
Allow (with a license warning) "options ZFS" to work in static kernels. The 'make depend' rules have to use custom -I paths for the special compat includes for the opensolaris/zfs headers. This option will pull in the couple of files that are shared with dtrace, but they appear to correctly use the MODULE_VERSION/MODULE_DEPEND rules so loader should do the right thing, as should kldload. Reviewed by: pjd (glanced at)
2012-03-27 21:23:56 +00:00
# There is only an asm version on ppc64.
zfs: merge openzfs/zfs@431083f75 Notable upstream pull request merges: #12194 Fix short-lived txg caused by autotrim #13368 ZFS_IOC_COUNT_FILLED does unnecessary txg_wait_synced() #13392 Implementation of block cloning for ZFS #13741 SHA2 reworking and API for iterating over multiple implementations #14282 Sync thread should avoid holding the spa config write lock when possible #14283 txg_sync should handle write errors in ZIL #14359 More adaptive ARC eviction #14469 Fix NULL pointer dereference in zio_ready() #14479 zfs redact fails when dnodesize=auto #14496 improve error message of zfs redact #14500 Skip memory allocation when compressing holes #14501 FreeBSD: don't verify recycled vnode for zfs control directory #14502 partially revert PR 14304 (eee9362a7) #14509 Fix per-jail zfs.mount_snapshot setting #14514 Fix data race between zil_commit() and zil_suspend() #14516 System-wide speculative prefetch limit #14517 Use rw_tryupgrade() in dmu_bonus_hold_by_dnode() #14519 Do not hold spa_config in ZIL while blocked on IO #14523 Move dmu_buf_rele() after dsl_dataset_sync_done() #14524 Ignore too large stack in case of dsl_deadlist_merge #14526 Use .section .rodata instead of .rodata on FreeBSD #14528 ICP: AES-GCM: Refactor gcm_clear_ctx() #14529 ICP: AES-GCM: Unify gcm_init_ctx() and gmac_init_ctx() #14532 Handle unexpected errors in zil_lwb_commit() without ASSERT() #14544 icp: Prevent compilers from optimizing away memset() in gcm_clear_ctx() #14546 Revert zfeature_active() to static #14556 Remove bad kmem_free() oversight from previous zfsdev_state_list patch #14563 Optimize the is_l2cacheable functions #14565 FreeBSD: zfs_znode_alloc: lock the vnode earlier #14566 FreeBSD: fix false assert in cache_vop_rmdir when replaying ZIL #14567 spl: Add cmn_err_once() to log a message only on the first call #14568 Fix incremental receive silently failing for recursive sends #14569 Restore ASMABI and other Unify work #14576 Fix detection of IBM Power8 machines (ISA 2.07) #14577 Better handling for future crypto parameters #14600 zcommon: Refactor FPU state handling in fletcher4 #14603 Fix prefetching of indirect blocks while destroying #14633 Fixes in persistent error log #14639 FreeBSD: Remove extra arc_reduce_target_size() call #14641 Additional limits on hole reporting #14649 Drop lying to the compiler in the fletcher4 code #14652 panic loop when removing slog device #14653 Update vdev state for spare vdev #14655 Fix cloning into already dirty dbufs #14678 Revert "Do not hold spa_config in ZIL while blocked on IO" Obtained from: OpenZFS OpenZFS commit: 431083f75bdd3efaee992bdd672625ec7240d252
2023-04-03 14:49:30 +00:00
# zfs blake3 hash support
zfs: fix static module build broken in 1f1e2261e
2022-06-23 17:42:55 +00:00
contrib/openzfs/module/icp/asm-ppc64/blake3/b3_ppc64le_sse2.S optional zfs compile-with "${ZFS_S}"
contrib/openzfs/module/icp/asm-ppc64/blake3/b3_ppc64le_sse41.S optional zfs compile-with "${ZFS_S}"
zfs: merge openzfs/zfs@431083f75 Notable upstream pull request merges: #12194 Fix short-lived txg caused by autotrim #13368 ZFS_IOC_COUNT_FILLED does unnecessary txg_wait_synced() #13392 Implementation of block cloning for ZFS #13741 SHA2 reworking and API for iterating over multiple implementations #14282 Sync thread should avoid holding the spa config write lock when possible #14283 txg_sync should handle write errors in ZIL #14359 More adaptive ARC eviction #14469 Fix NULL pointer dereference in zio_ready() #14479 zfs redact fails when dnodesize=auto #14496 improve error message of zfs redact #14500 Skip memory allocation when compressing holes #14501 FreeBSD: don't verify recycled vnode for zfs control directory #14502 partially revert PR 14304 (eee9362a7) #14509 Fix per-jail zfs.mount_snapshot setting #14514 Fix data race between zil_commit() and zil_suspend() #14516 System-wide speculative prefetch limit #14517 Use rw_tryupgrade() in dmu_bonus_hold_by_dnode() #14519 Do not hold spa_config in ZIL while blocked on IO #14523 Move dmu_buf_rele() after dsl_dataset_sync_done() #14524 Ignore too large stack in case of dsl_deadlist_merge #14526 Use .section .rodata instead of .rodata on FreeBSD #14528 ICP: AES-GCM: Refactor gcm_clear_ctx() #14529 ICP: AES-GCM: Unify gcm_init_ctx() and gmac_init_ctx() #14532 Handle unexpected errors in zil_lwb_commit() without ASSERT() #14544 icp: Prevent compilers from optimizing away memset() in gcm_clear_ctx() #14546 Revert zfeature_active() to static #14556 Remove bad kmem_free() oversight from previous zfsdev_state_list patch #14563 Optimize the is_l2cacheable functions #14565 FreeBSD: zfs_znode_alloc: lock the vnode earlier #14566 FreeBSD: fix false assert in cache_vop_rmdir when replaying ZIL #14567 spl: Add cmn_err_once() to log a message only on the first call #14568 Fix incremental receive silently failing for recursive sends #14569 Restore ASMABI and other Unify work #14576 Fix detection of IBM Power8 machines (ISA 2.07) #14577 Better handling for future crypto parameters #14600 zcommon: Refactor FPU state handling in fletcher4 #14603 Fix prefetching of indirect blocks while destroying #14633 Fixes in persistent error log #14639 FreeBSD: Remove extra arc_reduce_target_size() call #14641 Additional limits on hole reporting #14649 Drop lying to the compiler in the fletcher4 code #14652 panic loop when removing slog device #14653 Update vdev state for spare vdev #14655 Fix cloning into already dirty dbufs #14678 Revert "Do not hold spa_config in ZIL while blocked on IO" Obtained from: OpenZFS OpenZFS commit: 431083f75bdd3efaee992bdd672625ec7240d252
2023-04-03 14:49:30 +00:00
# zfs sha2 hash support
contrib/openzfs/module/icp/asm-ppc64/sha2/sha256-p8.S optional zfs compile-with "${ZFS_S}"
contrib/openzfs/module/icp/asm-ppc64/sha2/sha512-p8.S optional zfs compile-with "${ZFS_S}"
contrib/openzfs/module/icp/asm-ppc64/sha2/sha256-ppc.S optional zfs compile-with "${ZFS_S}"
contrib/openzfs/module/icp/asm-ppc64/sha2/sha512-ppc.S optional zfs compile-with "${ZFS_S}"
Compile the atomic64 emulation for powerpcspe With this, ZFS builds for and runs (not quite stablely) on powerpcspe.
2017-07-21 03:48:09 +00:00
cddl/compat/opensolaris/kern/opensolaris_atomic.c optional zfs powerpc | dtrace powerpc | zfs powerpcspe | dtrace powerpcspe compile-with "${ZFS_C}"
Allow DTrace to be compiled-in to the kernel. This will require for AArch64 as we dont have modules yet. Sponsored by: HEIF5 Sponsored by: ARM Ltd. Differential Revision: https://reviews.freebsd.org/D1997
2015-06-10 15:53:39 +00:00
cddl/dev/dtrace/powerpc/dtrace_asm.S optional dtrace compile-with "${DTRACE_S}"
cddl/dev/dtrace/powerpc/dtrace_subr.c optional dtrace compile-with "${DTRACE_C}"
cddl/dev/fbt/powerpc/fbt_isa.c optional dtrace_fbt | dtraceall compile-with "${FBT_C}"
Remove support for DES and Triple DES from OCF. It no longer has any in-kernel consumers via OCF. smbfs still uses single DES directly, so sys/crypto/des remains for that use case. Reviewed by: cem Relnotes: yes Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D24773
2020-05-11 21:34:29 +00:00
crypto/des/des_enc.c optional netsmb
[aacraid] Port driver to big-endian Port aacraid driver to big-endian (BE) hosts. The immediate goal of this change is to make it possible to use the aacraid driver on PowerPC64 machines that have Adaptec Series 8 SAS controllers. Adapters supported by this driver expect FIB contents in little-endian (LE) byte order. All FIBs have a fixed header part as well as a data part that depends on the command being issued to the controller. In this way, on BE hosts, the FIB header and all FIB data structures used in aacraid.c and aacraid_cam.c need to be converted to LE before being sent to the adapter and converted to BE when coming from it. The functions to convert each struct are on aacraid_endian.c. For little-endian (LE) targets, they are macros that expand to nothing. In some cases, when only a few fields of a large structure are used, the fields are converted inline, by the code using them. PR: 237463 Reviewed by: jhibbits Sponsored by: Eldorado Research Institute (eldorado.org.br) Differential Revision: https://reviews.freebsd.org/D23887
2020-03-05 20:04:41 +00:00
dev/aacraid/aacraid_endian.c optional aacraid
Add ADB support. This provides support for the external ADB bus on the PowerMac G3 as well as the internal ADB keyboard and mice in PowerBooks and iBooks. This also brings in Mac GPIO support, for which we should eventually have a better interface. Obtained from: NetBSD (CUDA and PMU drivers)
2008-10-26 19:37:38 +00:00
dev/adb/adb_bus.c optional adb
dev/adb/adb_kbd.c optional adb
dev/adb/adb_mouse.c optional adb
dev/adb/adb_hb_if.m optional adb
dev/adb/adb_if.m optional adb
Add support for special keys (volume/brightness/eject) on Apple laptops with ADB keyboards. Submitted by: Justin Hibbits <jrh29 at alumni dot cwru dot edu> MFC after: 9.0-RELEASE
2011-10-16 21:01:42 +00:00
dev/adb/adb_buttons.c optional adb
Add a driver for the Apple Uninorth AGP host bridge found in all PowerPC Macintoshes with an AGP bus.
2010-10-31 18:27:05 +00:00
dev/agp/agp_apple.c optional agp powermac
Add syscons files, and also generate a syscons font since Apple SVGA adapters don't have one available in their ROMs.
2004-01-21 05:19:59 +00:00
dev/fb/fb.c optional sc
Merge the QorIQ GPIO drivers between arm and powerpc Summary: They're nearly identical, so don't use two copies. Merge the newer driver into the older one, and move it to a common location. Add the Semihalf and associated copyrights in addition to mine, since it's a non-trivial amount of code merged. Reviewed By: mw Differential Revision: https://reviews.freebsd.org/D29520
2021-04-05 15:35:15 +00:00
dev/gpio/qoriq_gpio.c optional mpc85xx gpio
Implement hwpmc(4) for Freescale e500 core. This supports e500v1, e500v2, and e500mc. Tested only on e500v2, but the performance counters are identical across all, with e500mc having some additional events. Relnotes: Yes
2015-04-18 21:39:17 +00:00
dev/hwpmc/hwpmc_e500.c optional hwpmc
Fix build.
2013-09-05 13:53:25 +00:00
dev/hwpmc/hwpmc_mpc7xxx.c optional hwpmc
Fix powerpc and LINT builds Fix build errors introduced by r367417 and r367390: - Guard label reached only by powerpc64 - Guard vm_reserv_level_iffullpop call, that is not defined on powerpc variants that don't support superpages - Add missing hwpmc file, for when hwpmc is built into kernel
2020-11-06 18:50:00 +00:00
dev/hwpmc/hwpmc_power8.c optional hwpmc
Implement hwpmc(4) for Freescale e500 core. This supports e500v1, e500v2, and e500mc. Tested only on e500v2, but the performance counters are identical across all, with e500mc having some additional events. Relnotes: Yes
2015-04-18 21:39:17 +00:00
dev/hwpmc/hwpmc_powerpc.c optional hwpmc
Add hwpmc(4) support for the PowerPC 970 class processors, direct events. This also fixes asserts on removal of the module for the mpc74xx. The PowerPC 970 processors have two different types of events: direct events and indirect events. Thus far only direct events are supported. I included some documentation in the driver on how indirect events work, but support is for the future. MFC after: 1 month
2014-02-01 02:03:50 +00:00
dev/hwpmc/hwpmc_ppc970.c optional hwpmc
Add a new driver, the ad7417, to read temperatures and voltages on some PowerMac's. Approved by: nwhitehorn (mentor)
2011-05-29 14:25:42 +00:00
dev/iicbus/ad7417.c optional ad7417 powermac
Fix whitespace.
2015-04-04 06:24:03 +00:00
dev/iicbus/adm1030.c optional powermac windtunnel | adm1030 powermac
Add driver for the ADT7460/ADT7467 fan controller found in later PowerBooks and iBooks. Original work by andreast. MFC after: 1 month
2014-02-03 01:22:50 +00:00
dev/iicbus/adt746x.c optional adt746x powermac
Add a new temperature driver for certain PowerMacs. Found here on my Quad G5.
2012-08-19 19:37:14 +00:00
dev/iicbus/ds1631.c optional ds1631 powermac
Add three new drivers for fan control and temperature reading on the PowerMac7,2. - The fcu driver lets us read and write the fan RPMs for all fans in the PowerMac7,2. This driver is PowerMac specific. - The ds1775 is a driver to read the temperature for the drive bay sensor. - The max6690 is another driver to read temperatures. Here it is used to read the inlet, the backside and the U3 heatsink temperature. An additional driver, the ad7417, will follow later. Thanks to nwhitehorn for guiding me through this driver development. Approved by: nwhitehorn (mentor)
2010-10-15 20:08:16 +00:00
dev/iicbus/ds1775.c optional ds1775 powermac
dev/iicbus/max6690.c optional max6690 powermac
Move the OFW iicbus code to dev/iicbus to stop polluting dev/ofw with unrelated code. Discussed with: nwhitehorn (a long time ago)
2016-05-24 01:33:49 +00:00
dev/iicbus/ofw_iicbus.c optional iicbus aim
Fix a534b50e245d on powerpc. MFC with: 1bd3e8ba696633ccd7525030d951b58ade167814
2022-02-20 13:02:13 +00:00
dev/iicbus/ofw_iicbus_if.m optional iicbus aim
Add an IPMI attachment for PowerNV systems IPMI access on PowerNV systems is done through the OPAL firmware. This adds a simple attachment for communicating with the FSP/BMC on these machines. This has been tested on a Talos POWER9 workstation, only in the bootup phase, noting the successful attachment messages: ... ipmi0: IPMI device rev. 0, firmware rev. 2.00, version 2.0, device support mask 0 ipmi0: Number of channels 2 ... The ipmi device has not been added to GENERIC64, but may be after further testing. It may also eventually be added to the ipmi module at that point.
2018-05-22 03:57:32 +00:00
dev/ipmi/ipmi.c optional ipmi
Support building IPMI as a module on powerpc64 This still only supports IPMI via OPAL on powerpc64, but now it can be tested with a GENERIC kernel.
2018-07-25 18:58:57 +00:00
dev/ipmi/ipmi_opal.c optional powernv ipmi
ice(4): Update to 1.37.7-k Notable changes include: - DSCP QoS Support (leveraging support added in rG9c950139051298831ce19d01ea5fb33ec6ea7f89) - Improved PFC handling and TC queue assignments (now all remaining queues are assigned to TC 0 when more than one TC is enabled and the number of available queues does not evenly divide between them) - Support for dumping the internal FW state for additional debugging by Intel support - Support for allowing "No FEC" to be a valid state for the LESM to negotiate when using non-standard compliant modules Also includes various bug fixes and smaller enhancements, too. Signed-off-by: Eric Joyner <erj@FreeBSD.org> Reviewed by: erj@ Tested by: Jeff Pieper <jeffrey.pieper@intel.com> MFC after: 3 days Relnotes: yes Sponsored by: Intel Corporation Differential Revision: https://reviews.freebsd.org/D38109
2023-02-14 01:29:44 +00:00
dev/ice/if_ice_iflib.c optional ice pci powerpc64 | ice pci powerpc64le \
powerpc: enable ice in GENERIC64LE Approved by: erj Differential Revision: https://reviews.freebsd.org/D33974
2022-01-20 21:32:02 +00:00
compile-with "${NORMAL_C} -I$S/dev/ice"
ice(4): Update to 1.37.7-k Notable changes include: - DSCP QoS Support (leveraging support added in rG9c950139051298831ce19d01ea5fb33ec6ea7f89) - Improved PFC handling and TC queue assignments (now all remaining queues are assigned to TC 0 when more than one TC is enabled and the number of available queues does not evenly divide between them) - Support for dumping the internal FW state for additional debugging by Intel support - Support for allowing "No FEC" to be a valid state for the LESM to negotiate when using non-standard compliant modules Also includes various bug fixes and smaller enhancements, too. Signed-off-by: Eric Joyner <erj@FreeBSD.org> Reviewed by: erj@ Tested by: Jeff Pieper <jeffrey.pieper@intel.com> MFC after: 3 days Relnotes: yes Sponsored by: Intel Corporation Differential Revision: https://reviews.freebsd.org/D38109
2023-02-14 01:29:44 +00:00
dev/ice/ice_lib.c optional ice pci powerpc64 | ice pci powerpc64le \
powerpc: enable ice in GENERIC64LE Approved by: erj Differential Revision: https://reviews.freebsd.org/D33974
2022-01-20 21:32:02 +00:00
compile-with "${NORMAL_C} -I$S/dev/ice"
ice(4): Update to 1.37.7-k Notable changes include: - DSCP QoS Support (leveraging support added in rG9c950139051298831ce19d01ea5fb33ec6ea7f89) - Improved PFC handling and TC queue assignments (now all remaining queues are assigned to TC 0 when more than one TC is enabled and the number of available queues does not evenly divide between them) - Support for dumping the internal FW state for additional debugging by Intel support - Support for allowing "No FEC" to be a valid state for the LESM to negotiate when using non-standard compliant modules Also includes various bug fixes and smaller enhancements, too. Signed-off-by: Eric Joyner <erj@FreeBSD.org> Reviewed by: erj@ Tested by: Jeff Pieper <jeffrey.pieper@intel.com> MFC after: 3 days Relnotes: yes Sponsored by: Intel Corporation Differential Revision: https://reviews.freebsd.org/D38109
2023-02-14 01:29:44 +00:00
dev/ice/ice_osdep.c optional ice pci powerpc64 | ice pci powerpc64le \
powerpc: enable ice in GENERIC64LE Approved by: erj Differential Revision: https://reviews.freebsd.org/D33974
2022-01-20 21:32:02 +00:00
compile-with "${NORMAL_C} -I$S/dev/ice"
ice(4): Update to 1.37.7-k Notable changes include: - DSCP QoS Support (leveraging support added in rG9c950139051298831ce19d01ea5fb33ec6ea7f89) - Improved PFC handling and TC queue assignments (now all remaining queues are assigned to TC 0 when more than one TC is enabled and the number of available queues does not evenly divide between them) - Support for dumping the internal FW state for additional debugging by Intel support - Support for allowing "No FEC" to be a valid state for the LESM to negotiate when using non-standard compliant modules Also includes various bug fixes and smaller enhancements, too. Signed-off-by: Eric Joyner <erj@FreeBSD.org> Reviewed by: erj@ Tested by: Jeff Pieper <jeffrey.pieper@intel.com> MFC after: 3 days Relnotes: yes Sponsored by: Intel Corporation Differential Revision: https://reviews.freebsd.org/D38109
2023-02-14 01:29:44 +00:00
dev/ice/ice_resmgr.c optional ice pci powerpc64 | ice pci powerpc64le \
powerpc: enable ice in GENERIC64LE Approved by: erj Differential Revision: https://reviews.freebsd.org/D33974
2022-01-20 21:32:02 +00:00
compile-with "${NORMAL_C} -I$S/dev/ice"
ice(4): Update to 1.37.7-k Notable changes include: - DSCP QoS Support (leveraging support added in rG9c950139051298831ce19d01ea5fb33ec6ea7f89) - Improved PFC handling and TC queue assignments (now all remaining queues are assigned to TC 0 when more than one TC is enabled and the number of available queues does not evenly divide between them) - Support for dumping the internal FW state for additional debugging by Intel support - Support for allowing "No FEC" to be a valid state for the LESM to negotiate when using non-standard compliant modules Also includes various bug fixes and smaller enhancements, too. Signed-off-by: Eric Joyner <erj@FreeBSD.org> Reviewed by: erj@ Tested by: Jeff Pieper <jeffrey.pieper@intel.com> MFC after: 3 days Relnotes: yes Sponsored by: Intel Corporation Differential Revision: https://reviews.freebsd.org/D38109
2023-02-14 01:29:44 +00:00
dev/ice/ice_strings.c optional ice pci powerpc64 | ice pci powerpc64le \
powerpc: enable ice in GENERIC64LE Approved by: erj Differential Revision: https://reviews.freebsd.org/D33974
2022-01-20 21:32:02 +00:00
compile-with "${NORMAL_C} -I$S/dev/ice"
ice(4): Update to 1.37.7-k Notable changes include: - DSCP QoS Support (leveraging support added in rG9c950139051298831ce19d01ea5fb33ec6ea7f89) - Improved PFC handling and TC queue assignments (now all remaining queues are assigned to TC 0 when more than one TC is enabled and the number of available queues does not evenly divide between them) - Support for dumping the internal FW state for additional debugging by Intel support - Support for allowing "No FEC" to be a valid state for the LESM to negotiate when using non-standard compliant modules Also includes various bug fixes and smaller enhancements, too. Signed-off-by: Eric Joyner <erj@FreeBSD.org> Reviewed by: erj@ Tested by: Jeff Pieper <jeffrey.pieper@intel.com> MFC after: 3 days Relnotes: yes Sponsored by: Intel Corporation Differential Revision: https://reviews.freebsd.org/D38109
2023-02-14 01:29:44 +00:00
dev/ice/ice_iflib_recovery_txrx.c optional ice pci powerpc64 | ice pci powerpc64le \
powerpc: enable ice in GENERIC64LE Approved by: erj Differential Revision: https://reviews.freebsd.org/D33974
2022-01-20 21:32:02 +00:00
compile-with "${NORMAL_C} -I$S/dev/ice"
ice(4): Update to 1.37.7-k Notable changes include: - DSCP QoS Support (leveraging support added in rG9c950139051298831ce19d01ea5fb33ec6ea7f89) - Improved PFC handling and TC queue assignments (now all remaining queues are assigned to TC 0 when more than one TC is enabled and the number of available queues does not evenly divide between them) - Support for dumping the internal FW state for additional debugging by Intel support - Support for allowing "No FEC" to be a valid state for the LESM to negotiate when using non-standard compliant modules Also includes various bug fixes and smaller enhancements, too. Signed-off-by: Eric Joyner <erj@FreeBSD.org> Reviewed by: erj@ Tested by: Jeff Pieper <jeffrey.pieper@intel.com> MFC after: 3 days Relnotes: yes Sponsored by: Intel Corporation Differential Revision: https://reviews.freebsd.org/D38109
2023-02-14 01:29:44 +00:00
dev/ice/ice_iflib_txrx.c optional ice pci powerpc64 | ice pci powerpc64le \
powerpc: enable ice in GENERIC64LE Approved by: erj Differential Revision: https://reviews.freebsd.org/D33974
2022-01-20 21:32:02 +00:00
compile-with "${NORMAL_C} -I$S/dev/ice"
ice(4): Update to 1.37.7-k Notable changes include: - DSCP QoS Support (leveraging support added in rG9c950139051298831ce19d01ea5fb33ec6ea7f89) - Improved PFC handling and TC queue assignments (now all remaining queues are assigned to TC 0 when more than one TC is enabled and the number of available queues does not evenly divide between them) - Support for dumping the internal FW state for additional debugging by Intel support - Support for allowing "No FEC" to be a valid state for the LESM to negotiate when using non-standard compliant modules Also includes various bug fixes and smaller enhancements, too. Signed-off-by: Eric Joyner <erj@FreeBSD.org> Reviewed by: erj@ Tested by: Jeff Pieper <jeffrey.pieper@intel.com> MFC after: 3 days Relnotes: yes Sponsored by: Intel Corporation Differential Revision: https://reviews.freebsd.org/D38109
2023-02-14 01:29:44 +00:00
dev/ice/ice_common.c optional ice pci powerpc64 | ice pci powerpc64le \
powerpc: enable ice in GENERIC64LE Approved by: erj Differential Revision: https://reviews.freebsd.org/D33974
2022-01-20 21:32:02 +00:00
compile-with "${NORMAL_C} -I$S/dev/ice"
ice(4): Update to 1.37.7-k Notable changes include: - DSCP QoS Support (leveraging support added in rG9c950139051298831ce19d01ea5fb33ec6ea7f89) - Improved PFC handling and TC queue assignments (now all remaining queues are assigned to TC 0 when more than one TC is enabled and the number of available queues does not evenly divide between them) - Support for dumping the internal FW state for additional debugging by Intel support - Support for allowing "No FEC" to be a valid state for the LESM to negotiate when using non-standard compliant modules Also includes various bug fixes and smaller enhancements, too. Signed-off-by: Eric Joyner <erj@FreeBSD.org> Reviewed by: erj@ Tested by: Jeff Pieper <jeffrey.pieper@intel.com> MFC after: 3 days Relnotes: yes Sponsored by: Intel Corporation Differential Revision: https://reviews.freebsd.org/D38109
2023-02-14 01:29:44 +00:00
dev/ice/ice_controlq.c optional ice pci powerpc64 | ice pci powerpc64le \
powerpc: enable ice in GENERIC64LE Approved by: erj Differential Revision: https://reviews.freebsd.org/D33974
2022-01-20 21:32:02 +00:00
compile-with "${NORMAL_C} -I$S/dev/ice"
ice(4): Update to 1.37.7-k Notable changes include: - DSCP QoS Support (leveraging support added in rG9c950139051298831ce19d01ea5fb33ec6ea7f89) - Improved PFC handling and TC queue assignments (now all remaining queues are assigned to TC 0 when more than one TC is enabled and the number of available queues does not evenly divide between them) - Support for dumping the internal FW state for additional debugging by Intel support - Support for allowing "No FEC" to be a valid state for the LESM to negotiate when using non-standard compliant modules Also includes various bug fixes and smaller enhancements, too. Signed-off-by: Eric Joyner <erj@FreeBSD.org> Reviewed by: erj@ Tested by: Jeff Pieper <jeffrey.pieper@intel.com> MFC after: 3 days Relnotes: yes Sponsored by: Intel Corporation Differential Revision: https://reviews.freebsd.org/D38109
2023-02-14 01:29:44 +00:00
dev/ice/ice_dcb.c optional ice pci powerpc64 | ice pci powerpc64le \
powerpc: enable ice in GENERIC64LE Approved by: erj Differential Revision: https://reviews.freebsd.org/D33974
2022-01-20 21:32:02 +00:00
compile-with "${NORMAL_C} -I$S/dev/ice"
ice(4): Update to 1.37.7-k Notable changes include: - DSCP QoS Support (leveraging support added in rG9c950139051298831ce19d01ea5fb33ec6ea7f89) - Improved PFC handling and TC queue assignments (now all remaining queues are assigned to TC 0 when more than one TC is enabled and the number of available queues does not evenly divide between them) - Support for dumping the internal FW state for additional debugging by Intel support - Support for allowing "No FEC" to be a valid state for the LESM to negotiate when using non-standard compliant modules Also includes various bug fixes and smaller enhancements, too. Signed-off-by: Eric Joyner <erj@FreeBSD.org> Reviewed by: erj@ Tested by: Jeff Pieper <jeffrey.pieper@intel.com> MFC after: 3 days Relnotes: yes Sponsored by: Intel Corporation Differential Revision: https://reviews.freebsd.org/D38109
2023-02-14 01:29:44 +00:00
dev/ice/ice_flex_pipe.c optional ice pci powerpc64 | ice pci powerpc64le \
powerpc: enable ice in GENERIC64LE Approved by: erj Differential Revision: https://reviews.freebsd.org/D33974
2022-01-20 21:32:02 +00:00
compile-with "${NORMAL_C} -I$S/dev/ice"
ice(4): Update to 1.37.7-k Notable changes include: - DSCP QoS Support (leveraging support added in rG9c950139051298831ce19d01ea5fb33ec6ea7f89) - Improved PFC handling and TC queue assignments (now all remaining queues are assigned to TC 0 when more than one TC is enabled and the number of available queues does not evenly divide between them) - Support for dumping the internal FW state for additional debugging by Intel support - Support for allowing "No FEC" to be a valid state for the LESM to negotiate when using non-standard compliant modules Also includes various bug fixes and smaller enhancements, too. Signed-off-by: Eric Joyner <erj@FreeBSD.org> Reviewed by: erj@ Tested by: Jeff Pieper <jeffrey.pieper@intel.com> MFC after: 3 days Relnotes: yes Sponsored by: Intel Corporation Differential Revision: https://reviews.freebsd.org/D38109
2023-02-14 01:29:44 +00:00
dev/ice/ice_flow.c optional ice pci powerpc64 | ice pci powerpc64le \
powerpc: enable ice in GENERIC64LE Approved by: erj Differential Revision: https://reviews.freebsd.org/D33974
2022-01-20 21:32:02 +00:00
compile-with "${NORMAL_C} -I$S/dev/ice"
ice(4): Update to 1.37.7-k Notable changes include: - DSCP QoS Support (leveraging support added in rG9c950139051298831ce19d01ea5fb33ec6ea7f89) - Improved PFC handling and TC queue assignments (now all remaining queues are assigned to TC 0 when more than one TC is enabled and the number of available queues does not evenly divide between them) - Support for dumping the internal FW state for additional debugging by Intel support - Support for allowing "No FEC" to be a valid state for the LESM to negotiate when using non-standard compliant modules Also includes various bug fixes and smaller enhancements, too. Signed-off-by: Eric Joyner <erj@FreeBSD.org> Reviewed by: erj@ Tested by: Jeff Pieper <jeffrey.pieper@intel.com> MFC after: 3 days Relnotes: yes Sponsored by: Intel Corporation Differential Revision: https://reviews.freebsd.org/D38109
2023-02-14 01:29:44 +00:00
dev/ice/ice_nvm.c optional ice pci powerpc64 | ice pci powerpc64le \
powerpc: enable ice in GENERIC64LE Approved by: erj Differential Revision: https://reviews.freebsd.org/D33974
2022-01-20 21:32:02 +00:00
compile-with "${NORMAL_C} -I$S/dev/ice"
ice(4): Update to 1.37.7-k Notable changes include: - DSCP QoS Support (leveraging support added in rG9c950139051298831ce19d01ea5fb33ec6ea7f89) - Improved PFC handling and TC queue assignments (now all remaining queues are assigned to TC 0 when more than one TC is enabled and the number of available queues does not evenly divide between them) - Support for dumping the internal FW state for additional debugging by Intel support - Support for allowing "No FEC" to be a valid state for the LESM to negotiate when using non-standard compliant modules Also includes various bug fixes and smaller enhancements, too. Signed-off-by: Eric Joyner <erj@FreeBSD.org> Reviewed by: erj@ Tested by: Jeff Pieper <jeffrey.pieper@intel.com> MFC after: 3 days Relnotes: yes Sponsored by: Intel Corporation Differential Revision: https://reviews.freebsd.org/D38109
2023-02-14 01:29:44 +00:00
dev/ice/ice_sched.c optional ice pci powerpc64 | ice pci powerpc64le \
powerpc: enable ice in GENERIC64LE Approved by: erj Differential Revision: https://reviews.freebsd.org/D33974
2022-01-20 21:32:02 +00:00
compile-with "${NORMAL_C} -I$S/dev/ice"
ice(4): Update to 1.37.7-k Notable changes include: - DSCP QoS Support (leveraging support added in rG9c950139051298831ce19d01ea5fb33ec6ea7f89) - Improved PFC handling and TC queue assignments (now all remaining queues are assigned to TC 0 when more than one TC is enabled and the number of available queues does not evenly divide between them) - Support for dumping the internal FW state for additional debugging by Intel support - Support for allowing "No FEC" to be a valid state for the LESM to negotiate when using non-standard compliant modules Also includes various bug fixes and smaller enhancements, too. Signed-off-by: Eric Joyner <erj@FreeBSD.org> Reviewed by: erj@ Tested by: Jeff Pieper <jeffrey.pieper@intel.com> MFC after: 3 days Relnotes: yes Sponsored by: Intel Corporation Differential Revision: https://reviews.freebsd.org/D38109
2023-02-14 01:29:44 +00:00
dev/ice/ice_switch.c optional ice pci powerpc64 | ice pci powerpc64le \
powerpc: enable ice in GENERIC64LE Approved by: erj Differential Revision: https://reviews.freebsd.org/D33974
2022-01-20 21:32:02 +00:00
compile-with "${NORMAL_C} -I$S/dev/ice"
ice(4): Update to 1.37.7-k Notable changes include: - DSCP QoS Support (leveraging support added in rG9c950139051298831ce19d01ea5fb33ec6ea7f89) - Improved PFC handling and TC queue assignments (now all remaining queues are assigned to TC 0 when more than one TC is enabled and the number of available queues does not evenly divide between them) - Support for dumping the internal FW state for additional debugging by Intel support - Support for allowing "No FEC" to be a valid state for the LESM to negotiate when using non-standard compliant modules Also includes various bug fixes and smaller enhancements, too. Signed-off-by: Eric Joyner <erj@FreeBSD.org> Reviewed by: erj@ Tested by: Jeff Pieper <jeffrey.pieper@intel.com> MFC after: 3 days Relnotes: yes Sponsored by: Intel Corporation Differential Revision: https://reviews.freebsd.org/D38109
2023-02-14 01:29:44 +00:00
dev/ice/ice_vlan_mode.c optional ice pci powerpc64 | ice pci powerpc64le \
powerpc: enable ice in GENERIC64LE Approved by: erj Differential Revision: https://reviews.freebsd.org/D33974
2022-01-20 21:32:02 +00:00
compile-with "${NORMAL_C} -I$S/dev/ice"
ice(4): Update to 1.37.7-k Notable changes include: - DSCP QoS Support (leveraging support added in rG9c950139051298831ce19d01ea5fb33ec6ea7f89) - Improved PFC handling and TC queue assignments (now all remaining queues are assigned to TC 0 when more than one TC is enabled and the number of available queues does not evenly divide between them) - Support for dumping the internal FW state for additional debugging by Intel support - Support for allowing "No FEC" to be a valid state for the LESM to negotiate when using non-standard compliant modules Also includes various bug fixes and smaller enhancements, too. Signed-off-by: Eric Joyner <erj@FreeBSD.org> Reviewed by: erj@ Tested by: Jeff Pieper <jeffrey.pieper@intel.com> MFC after: 3 days Relnotes: yes Sponsored by: Intel Corporation Differential Revision: https://reviews.freebsd.org/D38109
2023-02-14 01:29:44 +00:00
dev/ice/ice_fw_logging.c optional ice pci powerpc64 | ice pci powerpc64le \
ice(4): Update to 1.34.2-k - Adds FW logging support - Once enabled, this lets the firmware print event and error messages to the log, increasing the visibility into what the hardware is doing; this is useful for debugging - General bug fixes - Adds inital DCB support to the driver - Notably, this adds support for DCBX to the driver; now with the fw_lldp sysctl set to 1, the driver and adapter will adopt a DCBX configuration sent from a link partner - Adds statistcs sysctls for priority flow control frames - Adds new configuration sysctls for DCB-related features: (VLAN) user priority to TC mapping; ETS bandwidth allocation; priority flow control - Remove unused SR-IOV files (until support gets added) Signed-off-by: Eric Joyner <erj@FreeBSD.org> Tested by: jeffrey.e.pieper@intel.com MFC after: 3 days MFC with: 213e91399b, e438f0a975 Relnotes: yes Sponsored by: Intel Corporation Differential Revision: https://reviews.freebsd.org/D34024
2022-03-04 18:25:25 +00:00
compile-with "${NORMAL_C} -I$S/dev/ice"
ice(4): Update to 1.37.7-k Notable changes include: - DSCP QoS Support (leveraging support added in rG9c950139051298831ce19d01ea5fb33ec6ea7f89) - Improved PFC handling and TC queue assignments (now all remaining queues are assigned to TC 0 when more than one TC is enabled and the number of available queues does not evenly divide between them) - Support for dumping the internal FW state for additional debugging by Intel support - Support for allowing "No FEC" to be a valid state for the LESM to negotiate when using non-standard compliant modules Also includes various bug fixes and smaller enhancements, too. Signed-off-by: Eric Joyner <erj@FreeBSD.org> Reviewed by: erj@ Tested by: Jeff Pieper <jeffrey.pieper@intel.com> MFC after: 3 days Relnotes: yes Sponsored by: Intel Corporation Differential Revision: https://reviews.freebsd.org/D38109
2023-02-14 01:29:44 +00:00
dev/ice/ice_fwlog.c optional ice pci powerpc64 | ice pci powerpc64le \
ice(4): Update to 1.34.2-k - Adds FW logging support - Once enabled, this lets the firmware print event and error messages to the log, increasing the visibility into what the hardware is doing; this is useful for debugging - General bug fixes - Adds inital DCB support to the driver - Notably, this adds support for DCBX to the driver; now with the fw_lldp sysctl set to 1, the driver and adapter will adopt a DCBX configuration sent from a link partner - Adds statistcs sysctls for priority flow control frames - Adds new configuration sysctls for DCB-related features: (VLAN) user priority to TC mapping; ETS bandwidth allocation; priority flow control - Remove unused SR-IOV files (until support gets added) Signed-off-by: Eric Joyner <erj@FreeBSD.org> Tested by: jeffrey.e.pieper@intel.com MFC after: 3 days MFC with: 213e91399b, e438f0a975 Relnotes: yes Sponsored by: Intel Corporation Differential Revision: https://reviews.freebsd.org/D34024
2022-03-04 18:25:25 +00:00
compile-with "${NORMAL_C} -I$S/dev/ice"
ice(4): Update to 1.37.7-k Notable changes include: - DSCP QoS Support (leveraging support added in rG9c950139051298831ce19d01ea5fb33ec6ea7f89) - Improved PFC handling and TC queue assignments (now all remaining queues are assigned to TC 0 when more than one TC is enabled and the number of available queues does not evenly divide between them) - Support for dumping the internal FW state for additional debugging by Intel support - Support for allowing "No FEC" to be a valid state for the LESM to negotiate when using non-standard compliant modules Also includes various bug fixes and smaller enhancements, too. Signed-off-by: Eric Joyner <erj@FreeBSD.org> Reviewed by: erj@ Tested by: Jeff Pieper <jeffrey.pieper@intel.com> MFC after: 3 days Relnotes: yes Sponsored by: Intel Corporation Differential Revision: https://reviews.freebsd.org/D38109
2023-02-14 01:29:44 +00:00
dev/ice/ice_rdma.c optional ice pci powerpc64 | ice pci powerpc64le \
ice(4): Add RDMA Client Interface This allows the "irdma" driver to communicate with the ice(4) driver to allow it access to the underlying device's hardware resources as well as synchronize access to shared resources. This interface already existed in the standalone out-of-tree 1.34.2 driver; this commit adds and enables it in the in-kernel driver. Note: Adds hack to module Makefile to compile interface/.m files These are required for the RDMA client interface, but they don't build as-is like the normal .c files. The source directory doesn't seem to be included by default, so add lines that specifically add them as libraries so that ice_rdma.h can be found and the interface files will compile. Signed-off-by: Eric Joyner <erj@FreeBSD.org> MFC after: 1 week Sponsored by: Intel Corporation Differential Revision: https://reviews.freebsd.org/D30889
2021-12-02 00:50:06 +00:00
compile-with "${NORMAL_C} -I$S/dev/ice"
ice(4): Update to 1.37.7-k Notable changes include: - DSCP QoS Support (leveraging support added in rG9c950139051298831ce19d01ea5fb33ec6ea7f89) - Improved PFC handling and TC queue assignments (now all remaining queues are assigned to TC 0 when more than one TC is enabled and the number of available queues does not evenly divide between them) - Support for dumping the internal FW state for additional debugging by Intel support - Support for allowing "No FEC" to be a valid state for the LESM to negotiate when using non-standard compliant modules Also includes various bug fixes and smaller enhancements, too. Signed-off-by: Eric Joyner <erj@FreeBSD.org> Reviewed by: erj@ Tested by: Jeff Pieper <jeffrey.pieper@intel.com> MFC after: 3 days Relnotes: yes Sponsored by: Intel Corporation Differential Revision: https://reviews.freebsd.org/D38109
2023-02-14 01:29:44 +00:00
dev/ice/irdma_if.m optional ice pci powerpc64 | ice pci powerpc64le \
ice(4): Add RDMA Client Interface This allows the "irdma" driver to communicate with the ice(4) driver to allow it access to the underlying device's hardware resources as well as synchronize access to shared resources. This interface already existed in the standalone out-of-tree 1.34.2 driver; this commit adds and enables it in the in-kernel driver. Note: Adds hack to module Makefile to compile interface/.m files These are required for the RDMA client interface, but they don't build as-is like the normal .c files. The source directory doesn't seem to be included by default, so add lines that specifically add them as libraries so that ice_rdma.h can be found and the interface files will compile. Signed-off-by: Eric Joyner <erj@FreeBSD.org> MFC after: 1 week Sponsored by: Intel Corporation Differential Revision: https://reviews.freebsd.org/D30889
2021-12-02 00:50:06 +00:00
compile-with "${NORMAL_M} -I$S/dev/ice"
ice(4): Update to 1.37.7-k Notable changes include: - DSCP QoS Support (leveraging support added in rG9c950139051298831ce19d01ea5fb33ec6ea7f89) - Improved PFC handling and TC queue assignments (now all remaining queues are assigned to TC 0 when more than one TC is enabled and the number of available queues does not evenly divide between them) - Support for dumping the internal FW state for additional debugging by Intel support - Support for allowing "No FEC" to be a valid state for the LESM to negotiate when using non-standard compliant modules Also includes various bug fixes and smaller enhancements, too. Signed-off-by: Eric Joyner <erj@FreeBSD.org> Reviewed by: erj@ Tested by: Jeff Pieper <jeffrey.pieper@intel.com> MFC after: 3 days Relnotes: yes Sponsored by: Intel Corporation Differential Revision: https://reviews.freebsd.org/D38109
2023-02-14 01:29:44 +00:00
dev/ice/irdma_di_if.m optional ice pci powerpc64 | ice pci powerpc64le \
ice(4): Add RDMA Client Interface This allows the "irdma" driver to communicate with the ice(4) driver to allow it access to the underlying device's hardware resources as well as synchronize access to shared resources. This interface already existed in the standalone out-of-tree 1.34.2 driver; this commit adds and enables it in the in-kernel driver. Note: Adds hack to module Makefile to compile interface/.m files These are required for the RDMA client interface, but they don't build as-is like the normal .c files. The source directory doesn't seem to be included by default, so add lines that specifically add them as libraries so that ice_rdma.h can be found and the interface files will compile. Signed-off-by: Eric Joyner <erj@FreeBSD.org> MFC after: 1 week Sponsored by: Intel Corporation Differential Revision: https://reviews.freebsd.org/D30889
2021-12-02 00:50:06 +00:00
compile-with "${NORMAL_M} -I$S/dev/ice"
ice(4): Update to 1.37.7-k Notable changes include: - DSCP QoS Support (leveraging support added in rG9c950139051298831ce19d01ea5fb33ec6ea7f89) - Improved PFC handling and TC queue assignments (now all remaining queues are assigned to TC 0 when more than one TC is enabled and the number of available queues does not evenly divide between them) - Support for dumping the internal FW state for additional debugging by Intel support - Support for allowing "No FEC" to be a valid state for the LESM to negotiate when using non-standard compliant modules Also includes various bug fixes and smaller enhancements, too. Signed-off-by: Eric Joyner <erj@FreeBSD.org> Reviewed by: erj@ Tested by: Jeff Pieper <jeffrey.pieper@intel.com> MFC after: 3 days Relnotes: yes Sponsored by: Intel Corporation Differential Revision: https://reviews.freebsd.org/D38109
2023-02-14 01:29:44 +00:00
dev/ice/ice_ddp_common.c optional ice pci powerpc64 | ice pci powerpc64le \
compile-with "${NORMAL_C} -I$S/dev/ice"
ice_ddp: Update package to 1.3.30.0 This updated DDP is intended to be used with the forthcoming ice(4) driver update to 1.37.7-k. (But it will still work with the current version.) Co-authored-by: Piotr Kubaj <pkubaj@FreeBSD.org> Signed-off-by: Eric Joyner <erj@FreeBSD.org> MFC after: 1 week Sponsored by: Intel Corporation
2023-01-24 22:01:57 +00:00
ice_ddp.c optional ice_ddp powerpc64 | ice pci powerpc64le \
compile-with "${AWK} -f $S/tools/fw_stub.awk ice_ddp.fw:ice_ddp:0x01031e00 -mice_ddp -c${.TARGET}" \
powerpc: enable ice in GENERIC64LE Approved by: erj Differential Revision: https://reviews.freebsd.org/D33974
2022-01-20 21:32:02 +00:00
no-ctfconvert no-implicit-rule before-depend local \
clean "ice_ddp.c"
ice_ddp: Update package to 1.3.30.0 This updated DDP is intended to be used with the forthcoming ice(4) driver update to 1.37.7-k. (But it will still work with the current version.) Co-authored-by: Piotr Kubaj <pkubaj@FreeBSD.org> Signed-off-by: Eric Joyner <erj@FreeBSD.org> MFC after: 1 week Sponsored by: Intel Corporation
2023-01-24 22:01:57 +00:00
ice_ddp.fwo optional ice_ddp powerpc64 | ice pci powerpc64le \
powerpc: enable ice in GENERIC64LE Approved by: erj Differential Revision: https://reviews.freebsd.org/D33974
2022-01-20 21:32:02 +00:00
dependency "ice_ddp.fw" \
compile-with "${NORMAL_FWO}" \
no-implicit-rule \
clean "ice_ddp.fwo"
ice_ddp: Update package to 1.3.30.0 This updated DDP is intended to be used with the forthcoming ice(4) driver update to 1.37.7-k. (But it will still work with the current version.) Co-authored-by: Piotr Kubaj <pkubaj@FreeBSD.org> Signed-off-by: Eric Joyner <erj@FreeBSD.org> MFC after: 1 week Sponsored by: Intel Corporation
2023-01-24 22:01:57 +00:00
ice_ddp.fw optional ice_ddp powerpc64 | ice pci powerpc64le \
dependency "$S/contrib/dev/ice/ice-1.3.30.0.pkg" \
compile-with "${CP} $S/contrib/dev/ice/ice-1.3.30.0.pkg ice_ddp.fw" \
powerpc: enable ice in GENERIC64LE Approved by: erj Differential Revision: https://reviews.freebsd.org/D33974
2022-01-20 21:32:02 +00:00
no-obj no-implicit-rule \
clean "ice_ddp.fw"
Enable ixl device on PowerPC64 The ixl driver now works on PowerPC64 and may be compiled in-kernel and as a module. Reviewed by: alfredo, erj Sponsored by: Eldorado Research Institute (eldorado.org.br) Differential Revision: https://reviews.freebsd.org/D23974
2020-03-12 12:47:10 +00:00
dev/ixl/if_ixl.c optional ixl pci powerpc64 \
compile-with "${NORMAL_C} -I$S/dev/ixl"
dev/ixl/ixl_pf_main.c optional ixl pci powerpc64 \
compile-with "${NORMAL_C} -I$S/dev/ixl"
ixl(4): Add FW recovery mode support and other things Update the iflib version of ixl driver based on the OOT version ixl-1.11.29. Major changes: - Extract iflib specific functions from ixl_pf_main.c to ixl_pf_iflib.c to simplify code sharing between legacy and iflib version of driver - Add support for most recent FW API version (1.10), which extends FW LLDP Agent control by user to X722 devices - Improve handling of device global reset - Add support for the FW recovery mode - Use virtchnl function to validate virtual channel messages instead of using separate checks - Fix MAC/VLAN filters accounting Submitted by: Krzysztof Galazka <krzysztof.galazka@intel.com> Reviewed by: erj@ Tested by: Jeffrey Pieper <jeffrey.e.pieper@intel.com> MFC after: 1 week Relnotes: yes Sponsored by: Intel Corporation Differential Revision: https://reviews.freebsd.org/D24564
2020-06-09 22:42:54 +00:00
dev/ixl/ixl_pf_iflib.c optional ixl pci powerpc64 \
compile-with "${NORMAL_C} -I$S/dev/ixl"
Enable ixl device on PowerPC64 The ixl driver now works on PowerPC64 and may be compiled in-kernel and as a module. Reviewed by: alfredo, erj Sponsored by: Eldorado Research Institute (eldorado.org.br) Differential Revision: https://reviews.freebsd.org/D23974
2020-03-12 12:47:10 +00:00
dev/ixl/ixl_pf_qmgr.c optional ixl pci powerpc64 \
compile-with "${NORMAL_C} -I$S/dev/ixl"
dev/ixl/ixl_pf_iov.c optional ixl pci pci_iov powerpc64 \
compile-with "${NORMAL_C} -I$S/dev/ixl"
dev/ixl/ixl_pf_i2c.c optional ixl pci powerpc64 \
compile-with "${NORMAL_C} -I$S/dev/ixl"
dev/ixl/if_iavf.c optional iavf pci powerpc64 \
compile-with "${NORMAL_C} -I$S/dev/ixl"
dev/ixl/iavf_vc.c optional iavf pci powerpc64 \
compile-with "${NORMAL_C} -I$S/dev/ixl"
dev/ixl/ixl_txrx.c optional ixl pci powerpc64 | \
iavf pci powerpc64 \
compile-with "${NORMAL_C} -I$S/dev/ixl"
dev/ixl/i40e_osdep.c optional ixl pci powerpc64 | \
iavf pci powerpc64 \
compile-with "${NORMAL_C} -I$S/dev/ixl"
dev/ixl/i40e_lan_hmc.c optional ixl pci powerpc64 | \
iavf pci powerpc64 \
compile-with "${NORMAL_C} -I$S/dev/ixl"
dev/ixl/i40e_hmc.c optional ixl pci powerpc64 | \
iavf pci powerpc64 \
compile-with "${NORMAL_C} -I$S/dev/ixl"
dev/ixl/i40e_common.c optional ixl pci powerpc64 | \
iavf pci powerpc64 \
compile-with "${NORMAL_C} -I$S/dev/ixl"
dev/ixl/i40e_nvm.c optional ixl pci powerpc64 | \
iavf pci powerpc64 \
compile-with "${NORMAL_C} -I$S/dev/ixl"
dev/ixl/i40e_adminq.c optional ixl pci powerpc64 | \
iavf pci powerpc64 \
compile-with "${NORMAL_C} -I$S/dev/ixl"
dev/ixl/i40e_dcb.c optional ixl pci powerpc64 \
compile-with "${NORMAL_C} -I$S/dev/ixl"
Fix fat-fingering ("optional standard") and move all the OF code to being marked "standard", which is less confusing than having it conditional on AIM CPUs here, and then picked up through options FDT from conf/files on Book-E. Request by: jhibbits
2018-03-14 18:07:40 +00:00
# Most ofw stuff below is brought in by conf/files for options FDT, but
# we always want it, even on non-FDT platforms.
dev/fdt/simplebus.c standard
dev/ofw/openfirm.c standard
dev/ofw/openfirmio.c standard
dev/ofw/ofw_bus_if.m standard
dev/ofw/ofw_cpu.c standard
dev/ofw/ofw_if.m standard
dev/ofw/ofw_bus_subr.c standard
Make files under src/sys/powerpc/aim, as well as Open Firmware related files dependent upon option/cpu AIM. This is in preparation of adding support for Book-E (e500) support. Obtained from: Juniper, Semihalf
2007-12-16 01:02:47 +00:00
dev/ofw/ofw_console.c optional aim
dev/ofw/ofw_disk.c optional ofwd aim
Fix fat-fingering ("optional standard") and move all the OF code to being marked "standard", which is less confusing than having it conditional on AIM CPUs here, and then picked up through options FDT from conf/files on Book-E. Request by: jhibbits
2018-03-14 18:07:40 +00:00
dev/ofw/ofwbus.c standard
Rename ofwpci.c to ofw_pcib.c It's a class0 driver that implements some pcib methods and creates a pci bus as its children. The "ofw_pci" name will be used by a new driver that will be a subclass of the pci bus. No functional changes intended. Submitted by: Kornel Duleba <mindal@semihalf.com> Reviewed by: andrew Obtained from: Semihalf Sponsored by: Alstom Group Differential Revision: https://reviews.freebsd.org/D30226
2021-05-19 15:27:42 +00:00
dev/ofw/ofw_pcib.c optional pci
MFppc64: Kernel sources for 64-bit PowerPC, along with build-system changes to keep 32-bit kernels compiling (build system changes for 64-bit kernels are coming later). Existing 32-bit PowerPC kernel configurations must be updated after this change to specify their architecture.
2010-07-13 05:32:19 +00:00
dev/ofw/ofw_standard.c optional aim powerpc
Fix fat-fingering ("optional standard") and move all the OF code to being marked "standard", which is less confusing than having it conditional on AIM CPUs here, and then picked up through options FDT from conf/files on Book-E. Request by: jhibbits
2018-03-14 18:07:40 +00:00
dev/ofw/ofw_subr.c standard
Sort.
2007-12-14 23:47:39 +00:00
dev/powermac_nvram/powermac_nvram.c optional powermac_nvram powermac
Convert Freescale PowerPC platforms to FDT convention. The following systems are affected: - MPC8555CDS - MPC8572DS This overhaul covers the following major changes: - All integrated peripherals drivers for Freescale MPC85XX SoC, which are currently in the FreeBSD source tree are reworked and adjusted so they derive config data out of the device tree blob (instead of hard coded / tabelarized values). - This includes: LBC, PCI / PCI-Express, I2C, DS1553, OpenPIC, TSEC, SEC, QUICC, UART, CFI. - Thanks to the common FDT infrastrucutre (fdtbus, simplebus) we retire ocpbus(4) driver, which was based on hard-coded config data. Note that world for these platforms has to be built WITH_FDT. Reviewed by: imp Sponsored by: The FreeBSD Foundation
2010-07-11 21:08:29 +00:00
dev/quicc/quicc_bfe_fdt.c optional quicc mpc85xx
[PowerPC64LE] Set up powerpc.powerpc64le architecture This is the initial set up for PowerPC64LE. The current plan is for this arch to remain experimental for FreeBSD 13. This started as a weekend learning project for me and kinda snowballed from there. (More to follow momentarily.) Reviewed by: imp (earlier version), emaste Sponsored by: Tag1 Consulting, Inc. Differential Revision: https://reviews.freebsd.org/D26399
2020-09-22 23:49:30 +00:00
dev/random/darn.c optional powerpc64 !random_loadable | powerpc64le !random_loadable
Sort.
2007-12-14 23:47:39 +00:00
dev/scc/scc_bfe_macio.c optional scc powermac
Merge i.MX and PowerPC SDHCI drivers Summary: i.MX5 and PowerPC use a very similar eSDHC controller, which is also similar to the uSDHC controller used by i.MX6. The imx_sdhci driver works almost completely with PowerPC, with some minor tweaks. There is one caveat with this: reset currently does not work on PowerPC, so has been #ifdef'd out until this can be tracked down and fixed. If resets are done the controller will timeout all data transactions. Without a reset, it appears to work just fine. This is part 3, following up r308186 and r308187. Test Plan: This has been tested on a PowerPC QorIQ P1022 board. It has not been tested on i.MX, but no regressions are expected. Reviewed By: imp Differential Revision: https://reviews.freebsd.org/D8407
2016-11-02 00:57:04 +00:00
dev/sdhci/fsl_sdhci.c optional mpc85xx sdhci
Initial version of the sec(4) driver for the integrated security engine found in Freescale system-on-chip devices. The following algorithms and schemes are currently supported: - 3DES, AES, DES - MD5, SHA1, SHA256, SHA384, SHA512 Reviewed by: philip Obtained from: Freescale, Semihalf
2009-06-06 09:37:55 +00:00
dev/sec/sec.c optional sec mpc85xx
Add support for the I2S and davbus audio controllers found in Apple PowerPC hardware. Submitted by: Marco Trillo
2009-01-25 18:20:15 +00:00
dev/sound/macio/aoa.c optional snd_davbus | snd_ai2s powermac
dev/sound/macio/davbus.c optional snd_davbus powermac
dev/sound/macio/i2s.c optional snd_ai2s powermac
Add a new sound driver for PowerMacs, found here on my Quad G5. It allows simple playback and volume control like the other Mac drivers, not more.
2012-08-19 19:40:33 +00:00
dev/sound/macio/onyx.c optional snd_ai2s iicbus powermac
Add support for the I2S and davbus audio controllers found in Apple PowerPC hardware. Submitted by: Marco Trillo
2009-01-25 18:20:15 +00:00
dev/sound/macio/snapper.c optional snd_ai2s iicbus powermac
dev/sound/macio/tumbler.c optional snd_ai2s iicbus powermac
Add syscons files, and also generate a syscons font since Apple SVGA adapters don't have one available in their ROMs.
2004-01-21 05:19:59 +00:00
dev/syscons/scgfbrndr.c optional sc
Connect MPC85XX to the PowerPC build. The kernel config file is KERNCONF=MPC85XX, so the usual procedure applies: 1. make buildworld TARGET_ARCH=powerpc 2. make buildkernel TARGET_ARCH=powerpc TARGET_CPUTYPE=e500 KERNCONF=MPC85XX This default config uses kernel-level FPU emulation. For the soft-float world approach: 1. make buildworld TARGET_ARCH=powerpc TARGET_CPUTYPE=e500 2. disable FPU_EMU option in sys/powerpc/conf/MPC85XX 3. make buildkernel TARGET_ARCH=powerpc TARGET_CPUTYPE=e500 KERNCONF=MPC85XX Approved by: cognet (mentor) MFp4: e500
2008-03-03 20:40:20 +00:00
dev/tsec/if_tsec.c optional tsec
The expression (aim | fdt) is always true on PowerPC. The last PowerPC platform that can run without a device tree (PS3) still uses the OF_*() functions to check if one exists and OF_* is used unconditionally in core parts of the system like powerpc/machdep.c. Reflect this reality in files.powerpc, for example by changing occurrences of aim | fdt to standard.
2018-03-14 16:16:25 +00:00
dev/tsec/if_tsec_fdt.c optional tsec
Make uart_cpu_powerpc work on both FDT and OFW systems. This is the last remaining modification required to build kernels that work with both on PowerPC.
2013-12-01 16:02:22 +00:00
dev/uart/uart_cpu_powerpc.c optional uart
Merge MPC85XX and QorIQ config options Summary: MPC85XX and QorIQ are very similar. When the DPAA dTSEC driver was added, QORIQ_DPAA was brought in as a config option to support the differences in hardware register settings between QorIQ (e500mc-, e5500- based) SoCs and QUICC (e500v1/e500v2-based) SoCs, particularly in the Local Access Window (LAW) target settings. Unify these settings using macros to hide details and ease porting, and use a new function (mpc85xx_is_qoriq()) to distinguish between QorIQ and QUICC SoCs at runtime. An alternative to using the function could be to use a variable initialized at platform attach time, which may incur less overhead at runtime. Since it's not in the critical path once booted, this optimization doesn't seem necessary at first pass. Reviewed by: nwhitehorn MFC after: 1 week Differential Revision: https://reviews.freebsd.org/D7294
2016-08-03 01:22:11 +00:00
dev/usb/controller/ehci_fsl.c optional ehci mpc85xx
Merge VT(9) project (a.k.a. newcons). Reviewed by: nwhitehorn MFC_to_10_after: re approval Sponsored by: The FreeBSD Foundation
2013-12-05 22:38:53 +00:00
dev/vt/hw/ofwfb/ofwfb.c optional vt aim
[PowerPC] [MIPS] Implement 32-bit kernel emulation of atomic64 operations This is a lock-based emulation of 64-bit atomics for kernel use, split off from an earlier patch by jhibbits. This is needed to unblock future improvements that reduce the need for locking on 64-bit platforms by using atomic updates. The implementation allows for future integration with userland atomic64, but as that implies going through sysarch for every use, the current status quo of userland doing its own locking may be for the best. Submitted by: jhibbits (original patch), kevans (mips bits) Reviewed by: jhibbits, jeff, kevans Differential Revision: https://reviews.freebsd.org/D22976
2020-01-02 23:20:37 +00:00
kern/subr_atomic64.c optional powerpc | powerpcspe
Implement mechanism to export some kernel timekeeping data to usermode, using shared page. The structures and functions have vdso prefix, to indicate the intended location of the code in some future. The versioned per-algorithm data is exported in the format of struct vdso_timehands, which mostly repeats the content of in-kernel struct timehands. Usermode reading of the structure can be lockless. Compatibility export for 32bit processes on 64bit host is also provided. Kernel also provides usermode with indication about currently used timecounter, so that libc can fall back to syscall if configured timecounter is unknown to usermode code. The shared data updates are initiated both from the tc_windup(), where a fast task is queued to do the update, and from sysctl handlers which change timecounter. A manual override switch kern.timecounter.fast_gettime allows to turn off the mechanism. Only x86 architectures export the real algorithm data, and there, only for tsc timecounter. HPET counters page could be exported as well, but I prefer to not further glue the kernel and libc ABI there until proper vdso-based solution is developed. Minimal stubs neccessary for non-x86 architectures to still compile are provided. Discussed with: bde Reviewed by: jhb Tested by: flo MFC after: 1 month
2012-06-22 07:06:40 +00:00
kern/subr_dummy_vdso_tc.c standard
Fix build for non-WITNESS case spotted by: Suleiman Souhlal <refugee@segfaulted.com>
2004-07-11 01:38:25 +00:00
kern/syscalls.c optional ktr
Merge all MD sf_buf allocators into one MI, residing in kern/subr_sfbuf.c The MD allocators were very common, however there were some minor differencies. These differencies were all consolidated in the MI allocator, under ifdefs. The defines from machine/vmparam.h turn on features required for a particular machine. For details look in the comment in sys/sf_buf.h. As result no MD code left in sys/*/*/vm_machdep.c. Some arches still have machine/sf_buf.h, which is usually quite small. Tested by: glebius (i386), tuexen (arm32), kevlo (arm32) Reviewed by: kib Sponsored by: Netflix Sponsored by: Nginx, Inc.
2014-08-05 09:44:10 +00:00
kern/subr_sfbuf.c standard
Create a new MACHINE_ARCH for Freescale PowerPC e500v2 Summary: The Freescale e500v2 PowerPC core does not use a standard FPU. Instead, it uses a Signal Processing Engine (SPE)--a DSP-style vector processor unit, which doubles as a FPU. The PowerPC SPE ABI is incompatible with the stock powerpc ABI, so a new MACHINE_ARCH was created to deal with this. Additionaly, the SPE opcodes overlap with Altivec, so these are mutually exclusive. Taking advantage of this fact, a new file, powerpc/booke/spe.c, was created with the same function set as in powerpc/powerpc/altivec.c, so it becomes effectively a drop-in replacement. setjmp/longjmp were modified to save the upper 32-bits of the now-64-bit GPRs (upper 32-bits are only accessible by the SPE). Note: This does _not_ support the SPE in the e500v1, as the e500v1 SPE does not support double-precision floating point. Also, without a new MACHINE_ARCH it would be impossible to provide binary packages which utilize the SPE. Additionally, no work has been done to support ports, work is needed for this. This also means no newer gcc can yet be used. However, gcc's powerpc support has been refactored which would make adding a powerpcspe-freebsd target very easy. Test Plan: This was lightly tested on a RouterBoard RB800 and an AmigaOne A1222 (P1022-based) board, compiled against the new ABI. Base system utilities (/bin/sh, /bin/ls, etc) still function appropriately, the system is able to boot multiuser. Reviewed By: bdrewery, imp Relnotes: yes Differential Revision: https://reviews.freebsd.org/D5683
2016-10-22 01:57:15 +00:00
libkern/ashldi3.c optional powerpc | powerpcspe
libkern/ashrdi3.c optional powerpc | powerpcspe
Move MI-ish bcopy routine to libkern riscv and powerpc have nearly identical bcopy.c that's supposed to be mostly MI. Move it to the MI libkern. Differential Revision: https://reviews.freebsd.org/D15374
2018-05-10 02:31:38 +00:00
libkern/bcopy.c standard
Create a new MACHINE_ARCH for Freescale PowerPC e500v2 Summary: The Freescale e500v2 PowerPC core does not use a standard FPU. Instead, it uses a Signal Processing Engine (SPE)--a DSP-style vector processor unit, which doubles as a FPU. The PowerPC SPE ABI is incompatible with the stock powerpc ABI, so a new MACHINE_ARCH was created to deal with this. Additionaly, the SPE opcodes overlap with Altivec, so these are mutually exclusive. Taking advantage of this fact, a new file, powerpc/booke/spe.c, was created with the same function set as in powerpc/powerpc/altivec.c, so it becomes effectively a drop-in replacement. setjmp/longjmp were modified to save the upper 32-bits of the now-64-bit GPRs (upper 32-bits are only accessible by the SPE). Note: This does _not_ support the SPE in the e500v1, as the e500v1 SPE does not support double-precision floating point. Also, without a new MACHINE_ARCH it would be impossible to provide binary packages which utilize the SPE. Additionally, no work has been done to support ports, work is needed for this. This also means no newer gcc can yet be used. However, gcc's powerpc support has been refactored which would make adding a powerpcspe-freebsd target very easy. Test Plan: This was lightly tested on a RouterBoard RB800 and an AmigaOne A1222 (P1022-based) board, compiled against the new ABI. Base system utilities (/bin/sh, /bin/ls, etc) still function appropriately, the system is able to boot multiuser. Reviewed By: bdrewery, imp Relnotes: yes Differential Revision: https://reviews.freebsd.org/D5683
2016-10-22 01:57:15 +00:00
libkern/cmpdi2.c optional powerpc | powerpcspe
libkern/divdi3.c optional powerpc | powerpcspe
Sort.
2007-12-14 23:47:39 +00:00
libkern/ffs.c standard
libkern/ffsl.c standard
Add libkern ffsll() for parity with flsll() Sponsored by: EMC / Isilon Storage Division Differential Revision: https://reviews.freebsd.org/D3962
2015-10-22 20:28:37 +00:00
libkern/ffsll.c standard
provide fast versions of ffsl and flsl for i386; ffsll and flsll for amd64 Reviewed by: jhb MFC after: 10 days X-MFC note: consider thirdparty modules depending on these symbols Sponsored by: HybridCluster
2014-02-14 15:18:37 +00:00
libkern/flsll.c standard
Create a new MACHINE_ARCH for Freescale PowerPC e500v2 Summary: The Freescale e500v2 PowerPC core does not use a standard FPU. Instead, it uses a Signal Processing Engine (SPE)--a DSP-style vector processor unit, which doubles as a FPU. The PowerPC SPE ABI is incompatible with the stock powerpc ABI, so a new MACHINE_ARCH was created to deal with this. Additionaly, the SPE opcodes overlap with Altivec, so these are mutually exclusive. Taking advantage of this fact, a new file, powerpc/booke/spe.c, was created with the same function set as in powerpc/powerpc/altivec.c, so it becomes effectively a drop-in replacement. setjmp/longjmp were modified to save the upper 32-bits of the now-64-bit GPRs (upper 32-bits are only accessible by the SPE). Note: This does _not_ support the SPE in the e500v1, as the e500v1 SPE does not support double-precision floating point. Also, without a new MACHINE_ARCH it would be impossible to provide binary packages which utilize the SPE. Additionally, no work has been done to support ports, work is needed for this. This also means no newer gcc can yet be used. However, gcc's powerpc support has been refactored which would make adding a powerpcspe-freebsd target very easy. Test Plan: This was lightly tested on a RouterBoard RB800 and an AmigaOne A1222 (P1022-based) board, compiled against the new ABI. Base system utilities (/bin/sh, /bin/ls, etc) still function appropriately, the system is able to boot multiuser. Reviewed By: bdrewery, imp Relnotes: yes Differential Revision: https://reviews.freebsd.org/D5683
2016-10-22 01:57:15 +00:00
libkern/lshrdi3.c optional powerpc | powerpcspe
amd64: implement memcmp in assembly Both the in-kernel C variant and libc asm variant have very poor performance. The former compiles to a single byte comparison loop, which breaks down even for small sizes. The latter uses rep cmpsq/b which turn out to have very poor throughput and are slower than a hand-coded 32-byte comparison loop. Depending on size this is about 3-4 times faster than the current routines. Reviewed by: kib Approved by: re (gjb) Differential Revision: https://reviews.freebsd.org/D17328
2018-09-27 14:05:44 +00:00
libkern/memcmp.c standard
Sort.
2007-12-14 23:47:39 +00:00
libkern/memset.c standard
Create a new MACHINE_ARCH for Freescale PowerPC e500v2 Summary: The Freescale e500v2 PowerPC core does not use a standard FPU. Instead, it uses a Signal Processing Engine (SPE)--a DSP-style vector processor unit, which doubles as a FPU. The PowerPC SPE ABI is incompatible with the stock powerpc ABI, so a new MACHINE_ARCH was created to deal with this. Additionaly, the SPE opcodes overlap with Altivec, so these are mutually exclusive. Taking advantage of this fact, a new file, powerpc/booke/spe.c, was created with the same function set as in powerpc/powerpc/altivec.c, so it becomes effectively a drop-in replacement. setjmp/longjmp were modified to save the upper 32-bits of the now-64-bit GPRs (upper 32-bits are only accessible by the SPE). Note: This does _not_ support the SPE in the e500v1, as the e500v1 SPE does not support double-precision floating point. Also, without a new MACHINE_ARCH it would be impossible to provide binary packages which utilize the SPE. Additionally, no work has been done to support ports, work is needed for this. This also means no newer gcc can yet be used. However, gcc's powerpc support has been refactored which would make adding a powerpcspe-freebsd target very easy. Test Plan: This was lightly tested on a RouterBoard RB800 and an AmigaOne A1222 (P1022-based) board, compiled against the new ABI. Base system utilities (/bin/sh, /bin/ls, etc) still function appropriately, the system is able to boot multiuser. Reviewed By: bdrewery, imp Relnotes: yes Differential Revision: https://reviews.freebsd.org/D5683
2016-10-22 01:57:15 +00:00
libkern/moddi3.c optional powerpc | powerpcspe
libkern/qdivrem.c optional powerpc | powerpcspe
Import an optimized str{n}cmp on arm64 These are from the Arm Optimized Routines and don't use the VFP so are safe to use in the kernel. Sponsored by: The FreeBSD Foundation
2022-09-07 10:40:26 +00:00
libkern/strcmp.c standard
amd64: implement strlen in assembly The C variant in libkern performs excessive branching to find the non-zero byte instead of using the bsfq instruction. The same code patched to use it is still slower than the routine implemented here as the compiler keeps neglecting to perform certain optimizations (like using leaq). On top of that the routine can is a starting point for copyinstr which operates on words instead of bytes. Tested with glibc test suite. Sample results (calls/s): Haswell: $(perl -e "print 'A' x 3"): stock: 211198039 patched:338626619 asm: 465609618 $(perl -e "print 'A' x 100"): stock: 83151997 patched: 98285919 asm: 120719888 AMD EPYC 7R32: $(perl -e "print 'A' x 3"): stock: 282523617 asm: 491498172 $(perl -e "print 'A' x 100"): stock: 114857172 asm: 112082057
2021-02-08 17:01:48 +00:00
libkern/strlen.c standard
Import an optimized str{n}cmp on arm64 These are from the Arm Optimized Routines and don't use the VFP so are safe to use in the kernel. Sponsored by: The FreeBSD Foundation
2022-09-07 10:40:26 +00:00
libkern/strncmp.c standard
Create a new MACHINE_ARCH for Freescale PowerPC e500v2 Summary: The Freescale e500v2 PowerPC core does not use a standard FPU. Instead, it uses a Signal Processing Engine (SPE)--a DSP-style vector processor unit, which doubles as a FPU. The PowerPC SPE ABI is incompatible with the stock powerpc ABI, so a new MACHINE_ARCH was created to deal with this. Additionaly, the SPE opcodes overlap with Altivec, so these are mutually exclusive. Taking advantage of this fact, a new file, powerpc/booke/spe.c, was created with the same function set as in powerpc/powerpc/altivec.c, so it becomes effectively a drop-in replacement. setjmp/longjmp were modified to save the upper 32-bits of the now-64-bit GPRs (upper 32-bits are only accessible by the SPE). Note: This does _not_ support the SPE in the e500v1, as the e500v1 SPE does not support double-precision floating point. Also, without a new MACHINE_ARCH it would be impossible to provide binary packages which utilize the SPE. Additionally, no work has been done to support ports, work is needed for this. This also means no newer gcc can yet be used. However, gcc's powerpc support has been refactored which would make adding a powerpcspe-freebsd target very easy. Test Plan: This was lightly tested on a RouterBoard RB800 and an AmigaOne A1222 (P1022-based) board, compiled against the new ABI. Base system utilities (/bin/sh, /bin/ls, etc) still function appropriately, the system is able to boot multiuser. Reviewed By: bdrewery, imp Relnotes: yes Differential Revision: https://reviews.freebsd.org/D5683
2016-10-22 01:57:15 +00:00
libkern/ucmpdi2.c optional powerpc | powerpcspe
libkern/udivdi3.c optional powerpc | powerpcspe
libkern/umoddi3.c optional powerpc | powerpcspe
Make files under src/sys/powerpc/aim, as well as Open Firmware related files dependent upon option/cpu AIM. This is in preparation of adding support for Book-E (e500) support. Obtained from: Juniper, Semihalf
2007-12-16 01:02:47 +00:00
powerpc/aim/locore.S optional aim no-obj
Also happened to miss this in r282264.
2015-04-30 04:44:41 +00:00
powerpc/aim/aim_machdep.c optional aim
MFppc64: Kernel sources for 64-bit PowerPC, along with build-system changes to keep 32-bit kernels compiling (build system changes for 64-bit kernels are coming later). Existing 32-bit PowerPC kernel configurations must be updated after this change to specify their architecture.
2010-07-13 05:32:19 +00:00
powerpc/aim/mmu_oea.c optional aim powerpc
Add support for 64-bit PowerPC CPUs operating in the 64-bit bridge mode provided, for example, on the PowerPC 970 (G5), as well as on related CPUs like the POWER3 and POWER4. This also adds support for various built-in hardware found on Apple G5 hardware (e.g. the IBM CPC925 northbridge). Reviewed by: grehan
2009-04-04 00:22:44 +00:00
powerpc/aim/mmu_oea64.c optional aim
[PowerPC64LE] Set up powerpc.powerpc64le architecture This is the initial set up for PowerPC64LE. The current plan is for this arch to remain experimental for FreeBSD 13. This started as a weekend learning project for me and kinda snowballed from there. (More to follow momentarily.) Reviewed by: imp (earlier version), emaste Sponsored by: Tag1 Consulting, Inc. Differential Revision: https://reviews.freebsd.org/D26399
2020-09-22 23:49:30 +00:00
powerpc/aim/mmu_radix.c optional aim powerpc64 | aim powerpc64le
Add an abstraction layer to the 64-bit AIM MMU's page table manipulation logic to support modifying the page table through a hypervisor. This uses KOBJ inheritance to provide subclasses of the base 64-bit AIM MMU class with additional methods for page table manipulation. Many thanks to Peter Grehan for suggesting this design and implementing the MMU KOBJ inheritance mechanism.
2010-12-04 02:42:52 +00:00
powerpc/aim/moea64_native.c optional aim
Unbreak non-SMP builds. This was broken by r259284. Also, reorganize the code introduced in that revision a bit. Reviewed by: nwhitehorn MFC after: 3 weeks
2014-01-31 03:55:34 +00:00
powerpc/aim/mp_cpudep.c optional aim
[PowerPC64LE] Set up powerpc.powerpc64le architecture This is the initial set up for PowerPC64LE. The current plan is for this arch to remain experimental for FreeBSD 13. This started as a weekend learning project for me and kinda snowballed from there. (More to follow momentarily.) Reviewed by: imp (earlier version), emaste Sponsored by: Tag1 Consulting, Inc. Differential Revision: https://reviews.freebsd.org/D26399
2020-09-22 23:49:30 +00:00
powerpc/aim/slb.c optional aim powerpc64 | aim powerpc64le
powerpc: Add AmigaOne platform, a subclass of MPC85xx Summary: The AmigaOne platform, encompassing the X5000 and A1222 at this time, is based on the mpc85xx platform, but includes some things not listed in the device tree. Some custom devices, like CPLD, could be added to the device tree with an overlay, or other means. However, some cannot easily be done, such as the power button interrupt. The directory will also become a location to add AmigaOne platform drivers, such as the aforementioned CPLD, and its children. Reviewed by: bdragon Differential Revision: https://reviews.freebsd.org/D21829
2019-10-16 00:38:50 +00:00
powerpc/amigaone/platform_amigaone.c optional amigaone
powerpc/amigaone: Add CPLD driver for AmigaOne A1222 "Tabor" Like the X5000, the main CPLD on the A1222 is the communication medium between the CPU and the GPIO CPLD. It provides a mailbox communication feature, along with dual-port RAM accessible from both the CPU and GPIO CPLD, and 3 fan speed reporting registers.
2020-04-03 20:45:16 +00:00
powerpc/amigaone/cpld_a1222.c optional powerpc amigaone | powerpcspe amigaone
powerpc/amigaone/cpld_x5000.c optional powerpc amigaone | powerpc64 amigaone
Let us manage differences of Book-E PowerPC variations i.e. vendor / implementation specific vs. the common architecture definition. Bring PPC4XX defines (PSL, SPR, TLB). Note the new definitions under BOOKE_PPC4XX are not used in the code yet. This change set is not supposed to affect existing E500 support, it's just another reorg step before bringing support for E500mc, E5500 and PPC465. Obtained from: AppliedMicro, Freescale, Semihalf
2012-05-27 10:25:20 +00:00
powerpc/booke/locore.S optional booke no-obj
Also happened to miss this in r282264.
2015-04-30 04:44:41 +00:00
powerpc/booke/booke_machdep.c optional booke
Extract vendor specific Book-E pieces into separate files and have a common skeleton (maybe we should kobj-tize this one day). Note the PPC4xx bit is not connected to the build yet. Obtained from: AppliedMicro, Semihalf.
2012-05-30 17:34:40 +00:00
powerpc/booke/machdep_e500.c optional booke_e500
Let us manage differences of Book-E PowerPC variations i.e. vendor / implementation specific vs. the common architecture definition. Bring PPC4XX defines (PSL, SPR, TLB). Note the new definitions under BOOKE_PPC4XX are not used in the code yet. This change set is not supposed to affect existing E500 support, it's just another reorg step before bringing support for E500mc, E5500 and PPC465. Obtained from: AppliedMicro, Freescale, Semihalf
2012-05-27 10:25:20 +00:00
powerpc/booke/mp_cpudep.c optional booke smp
Rename the "bare" platform "mpc85xx", which is what it actually is, and add actual platform probing based on PVR. Still needs a little more work: in particular, the CCRS setup should move here. Also turn "bare" into a truly bare platform that doesn't pretend to know how to do anything except get the memory map. This should also be enhanced to process the FDT reserved memory list, but that is for another day.
2013-11-11 16:14:25 +00:00
powerpc/booke/platform_bare.c optional booke
Let us manage differences of Book-E PowerPC variations i.e. vendor / implementation specific vs. the common architecture definition. Bring PPC4XX defines (PSL, SPR, TLB). Note the new definitions under BOOKE_PPC4XX are not used in the code yet. This change set is not supposed to affect existing E500 support, it's just another reorg step before bringing support for E500mc, E5500 and PPC465. Obtained from: AppliedMicro, Freescale, Semihalf
2012-05-27 10:25:20 +00:00
powerpc/booke/pmap.c optional booke
Create a new MACHINE_ARCH for Freescale PowerPC e500v2 Summary: The Freescale e500v2 PowerPC core does not use a standard FPU. Instead, it uses a Signal Processing Engine (SPE)--a DSP-style vector processor unit, which doubles as a FPU. The PowerPC SPE ABI is incompatible with the stock powerpc ABI, so a new MACHINE_ARCH was created to deal with this. Additionaly, the SPE opcodes overlap with Altivec, so these are mutually exclusive. Taking advantage of this fact, a new file, powerpc/booke/spe.c, was created with the same function set as in powerpc/powerpc/altivec.c, so it becomes effectively a drop-in replacement. setjmp/longjmp were modified to save the upper 32-bits of the now-64-bit GPRs (upper 32-bits are only accessible by the SPE). Note: This does _not_ support the SPE in the e500v1, as the e500v1 SPE does not support double-precision floating point. Also, without a new MACHINE_ARCH it would be impossible to provide binary packages which utilize the SPE. Additionally, no work has been done to support ports, work is needed for this. This also means no newer gcc can yet be used. However, gcc's powerpc support has been refactored which would make adding a powerpcspe-freebsd target very easy. Test Plan: This was lightly tested on a RouterBoard RB800 and an AmigaOne A1222 (P1022-based) board, compiled against the new ABI. Base system utilities (/bin/sh, /bin/ls, etc) still function appropriately, the system is able to boot multiuser. Reviewed By: bdrewery, imp Relnotes: yes Differential Revision: https://reviews.freebsd.org/D5683
2016-10-22 01:57:15 +00:00
powerpc/booke/spe.c optional powerpcspe
Introduce support for cpufreq on PowerPC with the dynamic frequency switching capabilities of the MPC7447A and MPC7448.
2009-05-31 09:01:23 +00:00
powerpc/cpufreq/dfs.c optional cpufreq
Add cpufreq support for P1022 and MPC8536 P1022 and MPC8536 include a 'jog' feature for clock control (jog being a slower form of run mode). This is done by changing the PLL multiplier, and cannot be done if any core is in doze or sleep mode.
2017-07-21 03:40:05 +00:00
powerpc/cpufreq/mpc85xx_jog.c optional cpufreq mpc85xx
Add cpufreq support on the PowerPC G5, along with a skeleton SMU driver in order to slew CPU voltage during frequency changes. The OpenBSD SMU driver was an extremely helpful reference for this.
2009-06-23 04:28:32 +00:00
powerpc/cpufreq/pcr.c optional cpufreq aim
[PowerPC64LE] Set up powerpc.powerpc64le architecture This is the initial set up for PowerPC64LE. The current plan is for this arch to remain experimental for FreeBSD 13. This started as a weekend learning project for me and kinda snowballed from there. (More to follow momentarily.) Reviewed by: imp (earlier version), emaste Sponsored by: Tag1 Consulting, Inc. Differential Revision: https://reviews.freebsd.org/D26399
2020-09-22 23:49:30 +00:00
powerpc/cpufreq/pmcr.c optional cpufreq aim powerpc64 | cpufreq aim powerpc64le
Add PMU-based CPU frequency scaling. This method is used on most Titanium PowerBooks. MFC after: 1 month
2013-12-13 02:37:35 +00:00
powerpc/cpufreq/pmufreq.c optional cpufreq aim pmu
powerpcspe: Don't require FPU_EMU for powerpcspe IEEE emulation Build only the necessary fpu_emu files for supporting the SPE IEEE-754 emulation exception handler. MFC after: 1 week
2018-12-15 04:53:02 +00:00
powerpc/fpu/fpu_add.c optional fpu_emu | powerpcspe
powerpc/fpu/fpu_compare.c optional fpu_emu | powerpcspe
powerpc/fpu/fpu_div.c optional fpu_emu | powerpcspe
Fix debug printfs in FPU_EMU to compile on powerpc64 and enable it for powerpc64. This fixes the LINT64 kernel config. Approved by: nwhitehorn (the idea, not the actual patch)
2013-12-05 21:49:14 +00:00
powerpc/fpu/fpu_emu.c optional fpu_emu
powerpcspe: Don't require FPU_EMU for powerpcspe IEEE emulation Build only the necessary fpu_emu files for supporting the SPE IEEE-754 emulation exception handler. MFC after: 1 week
2018-12-15 04:53:02 +00:00
powerpc/fpu/fpu_explode.c optional fpu_emu | powerpcspe
powerpc/fpu/fpu_implode.c optional fpu_emu | powerpcspe
powerpc/fpu/fpu_mul.c optional fpu_emu | powerpcspe
Fix debug printfs in FPU_EMU to compile on powerpc64 and enable it for powerpc64. This fixes the LINT64 kernel config. Approved by: nwhitehorn (the idea, not the actual patch)
2013-12-05 21:49:14 +00:00
powerpc/fpu/fpu_sqrt.c optional fpu_emu
powerpcspe: Don't require FPU_EMU for powerpcspe IEEE emulation Build only the necessary fpu_emu files for supporting the SPE IEEE-754 emulation exception handler. MFC after: 1 week
2018-12-15 04:53:02 +00:00
powerpc/fpu/fpu_subr.c optional fpu_emu | powerpcspe
Add support for the IBM Full-System Simulator (Mambo). This code has been developed against the 970 and Cell simulators.
2010-07-31 13:22:34 +00:00
powerpc/mambo/mambocall.S optional mambo
powerpc/mambo/mambo.c optional mambo
powerpc/mambo/mambo_console.c optional mambo
powerpc/mambo/mambo_disk.c optional mambo
Create a RouterBoard platform and use it to create a flash map Summary: The RouterBoard uses a predefined partition map which doesn't exist in the fdt. This change allows overriding the fdt slicer with a custom slicer, and uses this custom slicer to define the flash map on the RouterBoard RB800. D3305 converts the mpc85xx platform into a base class, so that systems based on the mpc85xx platform can add their own overrides. This change builds on D3305, and creates a RouterBoard (RB800) platform to initialize the slicer override. Reviewed By: nwhitehorn, imp Differential Revision: https://reviews.freebsd.org/D3345
2015-08-22 05:50:18 +00:00
powerpc/mikrotik/platform_rb.c optional mikrotik
Add a driver for the RouterBoard RB800 User LED This may work on other RouterBoard PPC platforms, but I don't have any to test with.
2017-02-19 19:56:12 +00:00
powerpc/mikrotik/rb_led.c optional mikrotik
Add suppport for ISA and ISA interrupts to make the ATA controller in the VIA southbridge functional in the CDS (Configurable Development System) for MPC85XX. The embedded USB controllers look operational but the interrupt steering is still wrong.
2009-04-24 03:51:11 +00:00
powerpc/mpc85xx/atpic.c optional mpc85xx isa
The expression (aim | fdt) is always true on PowerPC. The last PowerPC platform that can run without a device tree (PS3) still uses the OF_*() functions to check if one exists and OF_* is used unconditionally in core parts of the system like powerpc/machdep.c. Reflect this reality in files.powerpc, for example by changing occurrences of aim | fdt to standard.
2018-03-14 16:16:25 +00:00
powerpc/mpc85xx/ds1553_bus_fdt.c optional ds1553
DS1553 RTC module driver. On the MPC8555CDS system it hangs off of the LBC bus. Obtained from: Semihalf
2009-06-22 15:48:47 +00:00
powerpc/mpc85xx/ds1553_core.c optional ds1553
Add NXP/Freescale DIU driver for PowerPC SoCs Summary: This enables some features of the DIU, using a static configuration, specified either via a 'edid' property on the 'display' FDT node, or a 'video-mode' environment variable (bootarg). 'video-mode' was chosen because it matches u-boot's naming, so it can be set with: setenv bootargs video-mode=${video-mode} at the u-boot CLI. Mouse cursor is not supported currently, as a hardware cursor is not supported by framebuffer VT yet. Currently it only supports a 32bpp ARGB (actually BGRA) format, and only a single composite plane, at up to 1280x1024. Differential Revision: https://reviews.freebsd.org/D8022
2016-09-27 00:53:41 +00:00
powerpc/mpc85xx/fsl_diu.c optional mpc85xx diu
Add Freescale eSPI driver found on QorIQ SoCs
2017-04-02 01:21:35 +00:00
powerpc/mpc85xx/fsl_espi.c optional mpc85xx spibus
Add Freescale QorIQ SATA controller support. The Freescale SATA controller has many similarities to AHCI controllers, so this driver is a heavily modified AHCI driver. Currently it seems to only do SATA 1.0 speeds (~100-150MB/s), so there is still room for improvement. Still to be done: * Address erratum SATA-A-006187 -- Spread Spectrum Support (intermittent non-recoverable transient data integrity error seen when SSC enabled). * Linux doesn't read the log page as it hangs on the P1022. See if that's applicable to this, and address accordingly. * Try to determine what's holding back performance, and address it. MFC after: 3 weeks Differential Revision: https://reviews.freebsd.org/D6071
2017-11-05 02:47:46 +00:00
powerpc/mpc85xx/fsl_sata.c optional mpc85xx ata
powerpc: Only build mpc85xx i2c driver for mpc85xx No need to build it for every other platform.
2019-12-21 04:44:17 +00:00
powerpc/mpc85xx/i2c.c optional mpc85xx iicbus
Keep file list sorted.
2009-06-22 15:53:41 +00:00
powerpc/mpc85xx/isa.c optional mpc85xx isa
Merge MPC85XX and QorIQ config options Summary: MPC85XX and QorIQ are very similar. When the DPAA dTSEC driver was added, QORIQ_DPAA was brought in as a config option to support the differences in hardware register settings between QorIQ (e500mc-, e5500- based) SoCs and QUICC (e500v1/e500v2-based) SoCs, particularly in the Local Access Window (LAW) target settings. Unify these settings using macros to hide details and ease porting, and use a new function (mpc85xx_is_qoriq()) to distinguish between QorIQ and QUICC SoCs at runtime. An alternative to using the function could be to use a variable initialized at platform attach time, which may incur less overhead at runtime. Since it's not in the critical path once booted, this optimization doesn't seem necessary at first pass. Reviewed by: nwhitehorn MFC after: 1 week Differential Revision: https://reviews.freebsd.org/D7294
2016-08-03 01:22:11 +00:00
powerpc/mpc85xx/lbc.c optional mpc85xx
powerpc/mpc85xx/mpc85xx.c optional mpc85xx
Enable L2 cache on supported PowerQUICC and QorIQ platforms Some PowerQUICC and QorIQ platforms have a L2 cache managed via the memory-mapped configuration registers, and appear as a node in the device tree. This adds basic support to enable the cache.
2018-01-13 01:36:37 +00:00
powerpc/mpc85xx/mpc85xx_cache.c optional mpc85xx
Add mpc85xx_gpio to the build conf. Missed this in the previous commit.
2015-04-04 06:22:14 +00:00
powerpc/mpc85xx/mpc85xx_gpio.c optional mpc85xx gpio
Merge MPC85XX and QorIQ config options Summary: MPC85XX and QorIQ are very similar. When the DPAA dTSEC driver was added, QORIQ_DPAA was brought in as a config option to support the differences in hardware register settings between QorIQ (e500mc-, e5500- based) SoCs and QUICC (e500v1/e500v2-based) SoCs, particularly in the Local Access Window (LAW) target settings. Unify these settings using macros to hide details and ease porting, and use a new function (mpc85xx_is_qoriq()) to distinguish between QorIQ and QUICC SoCs at runtime. An alternative to using the function could be to use a variable initialized at platform attach time, which may incur less overhead at runtime. Since it's not in the critical path once booted, this optimization doesn't seem necessary at first pass. Reviewed by: nwhitehorn MFC after: 1 week Differential Revision: https://reviews.freebsd.org/D7294
2016-08-03 01:22:11 +00:00
powerpc/mpc85xx/platform_mpc85xx.c optional mpc85xx
powerpc/mpc85xx/pci_mpc85xx.c optional pci mpc85xx
powerpc/mpc85xx/pci_mpc85xx_pcib.c optional pci mpc85xx
Make tsec work with the device tree present on the RB800. The previous code assumed that the MDIO bus was a direct child of the Ethernet interface. It may not be and indeed on many device trees is not. While here, add proper locking for MII transactions, which may be on a bus shared by several MACs. Hardware donated by: Benjamin Perrault
2013-11-11 15:43:21 +00:00
powerpc/ofw/ofw_machdep.c standard
Convert e500 PCI driver to use common PPC PCI bus glue. No functional changes.
2013-10-25 14:43:16 +00:00
powerpc/ofw/ofw_pcibus.c optional pci
powerpc/ofw/ofw_pcib_pci.c optional pci
Add an Open Firmware access module for real-mode OF accesses to the PowerPC build. This is required for the IBM Mambo simulator, as well as a variety of non-Apple PowerPC hardware.
2009-04-05 18:40:15 +00:00
powerpc/ofw/ofw_real.c optional aim
Make files under src/sys/powerpc/aim, as well as Open Firmware related files dependent upon option/cpu AIM. This is in preparation of adding support for Book-E (e500) support. Obtained from: Juniper, Semihalf
2007-12-16 01:02:47 +00:00
powerpc/ofw/ofw_syscons.c optional sc aim
Missed file in r222613.
2011-06-02 14:22:00 +00:00
powerpc/ofw/ofwcall32.S optional aim powerpc
[PowerPC64LE] Set up powerpc.powerpc64le architecture This is the initial set up for PowerPC64LE. The current plan is for this arch to remain experimental for FreeBSD 13. This started as a weekend learning project for me and kinda snowballed from there. (More to follow momentarily.) Reviewed by: imp (earlier version), emaste Sponsored by: Tag1 Consulting, Inc. Differential Revision: https://reviews.freebsd.org/D26399
2020-09-22 23:49:30 +00:00
powerpc/ofw/ofwcall64.S optional aim powerpc64 | aim powerpc64le
Fix another optional standard. Build openpic_ofw again.
2018-03-28 03:11:50 +00:00
powerpc/ofw/openpic_ofw.c standard
Missed file in r222613.
2011-06-02 14:22:00 +00:00
powerpc/ofw/rtas.c optional aim
[PowerPC64LE] Set up powerpc.powerpc64le architecture This is the initial set up for PowerPC64LE. The current plan is for this arch to remain experimental for FreeBSD 13. This started as a weekend learning project for me and kinda snowballed from there. (More to follow momentarily.) Reviewed by: imp (earlier version), emaste Sponsored by: Tag1 Consulting, Inc. Differential Revision: https://reviews.freebsd.org/D26399
2020-09-22 23:49:30 +00:00
powerpc/ofw/ofw_initrd.c optional md_root_mem powerpc64 | md_root_mem powerpc64le
Modularize the Macintosh built-in ATA along the lines of the rest of the ATA system as an optional atamacio device. PR: powerpc/133161 Submitted by: Bruce Cran
2009-04-04 17:05:17 +00:00
powerpc/powermac/ata_kauai.c optional powermac ata | powermac atamacio
powerpc/powermac/ata_macio.c optional powermac ata | powermac atamacio
powerpc/powermac/ata_dbdma.c optional powermac ata | powermac atamacio
Add backlight control to ATI-graphics PowerBooks and iBooks. Approved by: nwhitehorn (mentor) MFC after: 1 week
2012-02-26 13:45:25 +00:00
powerpc/powermac/atibl.c optional powermac atibl
Add cpufreq support on the PowerPC G5, along with a skeleton SMU driver in order to slew CPU voltage during frequency changes. The OpenBSD SMU driver was an extremely helpful reference for this.
2009-06-23 04:28:32 +00:00
powerpc/powermac/cuda.c optional powermac cuda
powerpc/powermac/cpcht.c optional powermac pci
Add support for Apple's Descriptor-Based DMA (DBDMA) engine. The DMA engine is usful to various existing drivers, such as ata(4) and scc(4), and is used bhy the soon to be added bm(4). Submitted by: Nathan Whitehorn
2008-06-07 21:56:48 +00:00
powerpc/powermac/dbdma.c optional powermac pci
Add three new drivers for fan control and temperature reading on the PowerMac7,2. - The fcu driver lets us read and write the fan RPMs for all fans in the PowerMac7,2. This driver is PowerMac specific. - The ds1775 is a driver to read the temperature for the drive bay sensor. - The max6690 is another driver to read temperatures. Here it is used to read the inlet, the backside and the U3 heatsink temperature. An additional driver, the ad7417, will follow later. Thanks to nwhitehorn for guiding me through this driver development. Approved by: nwhitehorn (mentor)
2010-10-15 20:08:16 +00:00
powerpc/powermac/fcu.c optional powermac fcu
Sort.
2007-12-14 23:47:39 +00:00
powerpc/powermac/grackle.c optional powermac pci
powerpc/powermac/hrowpic.c optional powermac pci
Driver for Apple Keywest I2C controllers found in MacIO ASICs. Used for power and thermal control, as well as GPIOs on Xserves and controlling sound codecs for Apple built-in audio. Submitted by: Marco Trillo Obtained from: NetBSD
2009-01-15 02:52:31 +00:00
powerpc/powermac/kiic.c optional powermac kiic
Add cpufreq support on the PowerPC G5, along with a skeleton SMU driver in order to slew CPU voltage during frequency changes. The OpenBSD SMU driver was an extremely helpful reference for this.
2009-06-23 04:28:32 +00:00
powerpc/powermac/macgpio.c optional powermac pci
Sort.
2007-12-14 23:47:39 +00:00
powerpc/powermac/macio.c optional powermac pci
Add backlight support for nVidia-based PowerBooks/iBooks/iMacs. Approved by: nwhitehorn (mentor) MFC after: 9.1-RELEASE
2012-08-04 03:05:01 +00:00
powerpc/powermac/nvbl.c optional powermac nvbl
Restructure how reset and poweroff are handled on PowerPC systems, since the existing code was very platform specific, and broken for SMP systems trying to reboot from KDB. - Add a new PLATFORM_RESET() method to the platform KOBJ interface, and migrate existing reset functions into platform modules. - Modify the OF_reboot() routine to submit the request by hand to avoid the IPIs involved in the regular openfirmware() routine. This fixes reboot from KDB on SMP machines. - Move non-KDB reset and poweroff functions on the Powermac platform into the relevant power control drivers (cuda, pmu, smu), instead of using them through the Open Firmware backdoor. - Rename platform_chrp to platform_powermac since it has become increasingly Powermac specific. When we gain support for IBM systems, we will grow a new platform_chrp.
2010-08-31 15:27:46 +00:00
powerpc/powermac/platform_powermac.c optional powermac
Factor out the SMU fan management code into a new module (powermac_thermal) that will connect all of the various sensors and fan control modules on Apple hardware with software-controlled fans (e.g. all G5 systems). MFC after: 1 month
2011-05-28 21:13:22 +00:00
powerpc/powermac/powermac_thermal.c optional powermac
Sort.
2007-12-14 23:47:39 +00:00
powerpc/powermac/pswitch.c optional powermac pswitch
Add ADB support. This provides support for the external ADB bus on the PowerMac G3 as well as the internal ADB keyboard and mice in PowerBooks and iBooks. This also brings in Mac GPIO support, for which we should eventually have a better interface. Obtained from: NetBSD (CUDA and PMU drivers)
2008-10-26 19:37:38 +00:00
powerpc/powermac/pmu.c optional powermac pmu
Add cpufreq support on the PowerPC G5, along with a skeleton SMU driver in order to slew CPU voltage during frequency changes. The OpenBSD SMU driver was an extremely helpful reference for this.
2009-06-23 04:28:32 +00:00
powerpc/powermac/smu.c optional powermac smu
Add a driver for the CPU temperature sensors attached over I2C on the PowerMac 11,2.
2010-06-05 17:51:37 +00:00
powerpc/powermac/smusat.c optional powermac smu
[PowerPC] PowerMac timebase sync for G4 Summary: Disable timebase on (some) AIM platforms (tested on PowerMac G4) prior to synchronization. Some platforms use a GPIO to enable and disable timebase, while others use a platform function. This mirrors 0d69f00b on mpc85xx. Todo: * Implement various G5 timebase controls. * Print out platform code on unknown G5s so we can collect it. * Change API to be give/take pairs like Linux does so it's possible to do a software sync protocol. Reviewed By: #powerpc, jhibbits Subscribers: mikael, markmi_dsl-only.net, luporl, alfredo Tags: #powerpc Differential Revision: https://reviews.freebsd.org/D29136
2021-12-23 21:45:24 +00:00
powerpc/powermac/tbgpio.c optional powermac pci smp
Add support for the U4 PCI-Express bridge chipset used in late-generation Powermac G5 systems. MSI and several other things are not presently supported. The U3/U4 internal device support portions of this change were contributed by Andreas Tobler. MFC after: 1 week
2010-05-16 15:18:25 +00:00
powerpc/powermac/uninorth.c optional powermac
powerpc/powermac/uninorthpci.c optional powermac pci
Introduce support for cpufreq on PowerPC with the dynamic frequency switching capabilities of the MPC7447A and MPC7448.
2009-05-31 09:01:23 +00:00
powerpc/powermac/vcoregpio.c optional powermac
PowerNV: initial support for OPAL OPAL is a dedicated firmware acting as a hypervisor. Add generic functions to provide all access. Created by: Nathan Whitehorn <nw@freebsd.org> Submitted by: Wojciech Macek <wma@freebsd.org>
2018-01-11 07:40:06 +00:00
powerpc/powernv/opal.c optional powernv
powerpc/powernv: Add asynchronous token management for powernv The OPAL firmware only supports a finite number of in-flight asynchronous operations. Rather than have each subsystem try to manage its own, use a central management service to hand out tokens. More work can be done to improve asynchronous behavior, such as funneling things through a future OPAL heartbeat handler, but capabilities will be added as needed. Augment the existing consumers (i2c and sensors) to use this new API. MFC after: 4 weeks
2019-03-01 02:49:47 +00:00
powerpc/powernv/opal_async.c optional powernv
PowerNV: initial support for OPAL OPAL is a dedicated firmware acting as a hypervisor. Add generic functions to provide all access. Created by: Nathan Whitehorn <nw@freebsd.org> Submitted by: Wojciech Macek <wma@freebsd.org>
2018-01-11 07:40:06 +00:00
powerpc/powernv/opal_console.c optional powernv
[PPC64] Enable opal console use as a GDB DBGPORT This change makes it possible to use OPAL console as a GDB debug port. Similar to uart and uart_phyp debug ports, it has to be enabled by setting the hw.uart.dbgport variable to the serial console node of the device tree. Reviewed by: jhibbits Differential Revision: https://reviews.freebsd.org/D22649
2019-12-09 13:09:32 +00:00
powerpc/powernv/opal_dbg.c optional powernv gdb
PowerNV: initial support for PCIe host controller Provide initial support for PCIe host controller as well as for IOMMU mapping. This commit allows proper bus enumeration, but does not guarantee DMA operations are working. Created by: Nathan Whitehorn <nwhitehorn@freebsd.org> Submitted by: Wojciech Macek <wma@semihalf.com> Sponsored by: FreeBSD Foundation
2018-01-12 07:55:49 +00:00
powerpc/powernv/opal_dev.c optional powernv
[PPC64] Turn opal_flash.c into a device This change makes it easier to enable/disable the inclusion of OPAL flash in the kernel. Reviewed by: jhibbits Differential Revision: https://reviews.freebsd.org/D20098
2019-04-29 16:50:33 +00:00
powerpc/powernv/opal_flash.c optional powernv opalflash
powernv: Add Hypervisor Maintenance Interrupt handler Attempting to build www/firefox on POWER9 resulted in a HMI exception being thrown, a fatal trap currently. This is typically caused by timer facility errors, but examination of the Hypervisor Maintenance Exception Register (HMER) yielded only that an exception had recovered, with no information of the actual exception cause. When an HMI occurs, OPAL_HANDLE_HMI or OPAL_HANDLE_HMI2 must be called to handle the exception at the firmware level. If the exception is handled, we can continue. This adds only the preliminary handler, enough to prevent package building from panicking. An enhancement in the future is to use the flags returned by OPAL_HANDLE_HMI2 to print more useful error messages, and log maintenance events. Reviewed by: luporl MFC after: 1 week Differential Revision: https://reviews.freebsd.org/D19634
2019-03-23 03:23:20 +00:00
powerpc/powernv/opal_hmi.c optional powernv
Reverting r330925 for now
2018-03-15 06:19:45 +00:00
powerpc/powernv/opal_i2c.c optional iicbus fdt powernv
powerpc/powernv/opal_i2cm.c optional iicbus fdt powernv
powerpc64/powernv: Add opal NVRAM driver for PowerNV systems Add a very basic NVRAM driver for OPAL which can be used by the IBM powerpc-utils nvram utility, not to be confused with the base nvram utility, which only operates on powermac_nvram. The IBM utility handles all partitions itself, treating the nvram device as a plain store. An alternative would be to manage partitions in the kernel, and augment the base nvram utility to deal with different backing stores, but that complicates the driver significantly. Instead, present the same interface IBM's utlity expects, and we get the usage for free. Tested by: bdragon
2019-09-14 03:30:34 +00:00
powerpc/powernv/opal_nvram.c optional powernv nvram
PowerNV: initial support for PCIe host controller Provide initial support for PCIe host controller as well as for IOMMU mapping. This commit allows proper bus enumeration, but does not guarantee DMA operations are working. Created by: Nathan Whitehorn <nwhitehorn@freebsd.org> Submitted by: Wojciech Macek <wma@semihalf.com> Sponsored by: FreeBSD Foundation
2018-01-12 07:55:49 +00:00
powerpc/powernv/opal_pci.c optional powernv pci
Basic OPAL sensor support for POWER9 platforms Summary: PowerNV architectures (in the test case POWER9) export sensors via the device tree, which are accessed via OPAL calls. This adds sysctl nodes for each device in a generic fashion. New sysctl nodes are: dev.opal_sensor.N.sensor dev.opal_sensor.N.sensor_min dev.opal_sensor.N.sensor_max dev.opal_sensor.N.type dev.opal_sensor.N.label These are rooted at a parent attachment under opal, called opalsens. This does not add support for the "sensor groups" defined in the device tree. Reviewed by: breno.leitao_gmail.com Differential Revision: https://reviews.freebsd.org/D15362
2018-05-22 02:42:53 +00:00
powerpc/powernv/opal_sensor.c optional powernv
PowerNV: initial support for OPAL OPAL is a dedicated firmware acting as a hypervisor. Add generic functions to provide all access. Created by: Nathan Whitehorn <nw@freebsd.org> Submitted by: Wojciech Macek <wma@freebsd.org>
2018-01-11 07:40:06 +00:00
powerpc/powernv/opalcall.S optional powernv
powerpc/powernv/platform_powernv.c optional powernv
PowerNV: Initial support for OPAL I2C transfers Add I2C OPAL driver and a set of dummy-ones to allow all I2C things on Power8 to attach. TODO: better async token management Submitted by: Wojciech Macek <wma@semihalf.com> Obtained from: Semihalf Sponsored by: IBM, QCM Technologies
2018-03-01 14:11:07 +00:00
powerpc/powernv/powernv_centaur.c optional powernv
powerpc/powernv/powernv_xscom.c optional powernv
powerpc/powernv: Add a driver for the POWER9 XIVE interrupt controller The XIVE (External Interrupt Virtualization Engine) is a new interrupt controller present in IBM's POWER9 processor. It's a very powerful, very complex device using queues and shared memory to improve interrupt dispatch performance in a virtualized environment. This yields a ~10% performance improvment over the XICS emulation mode, measured in both buildworld, and 'dd' from nvme to /dev/null. Currently, this only supports native access. MFC after: 1 month
2019-02-02 04:15:16 +00:00
powerpc/powernv/xive.c optional powernv
[PowerPC64LE] Set up powerpc.powerpc64le architecture This is the initial set up for PowerPC64LE. The current plan is for this arch to remain experimental for FreeBSD 13. This started as a weekend learning project for me and kinda snowballed from there. (More to follow momentarily.) Reviewed by: imp (earlier version), emaste Sponsored by: Tag1 Consulting, Inc. Differential Revision: https://reviews.freebsd.org/D26399
2020-09-22 23:49:30 +00:00
powerpc/powerpc/altivec.c optional !powerpcspe
The final commit for the first phase of PowerPC support. This adds the config stuff needed to build kernels. Reviewed by: obrien
2001-06-17 09:39:44 +00:00
powerpc/powerpc/autoconf.c standard
Redefine bus_space_tag_t on PowerPC from a 32-bit integral to a pointer to struct bus_space. The structure contains function pointers that do the actual bus space access. The reason for this change is that previously all bus space accesses were little endian (i.e. had an explicit byte-swap for multi-byte accesses), because all busses on Macs are little endian. The upcoming support for Book E, and in particular the E500 core, requires support for big-endian busses because all embedded peripherals are in the native byte-order. With this change, there's no distinction between I/O port space and memory mapped I/O. PowerPC doesn't have I/O port space. Busses assign tags based on the byte-order only. For that purpose, two global structures exist (bs_be_tag and bs_le_tag), of which the address can be taken to get a valid tag. Obtained from: Juniper, Semihalf
2007-12-19 18:00:50 +00:00
powerpc/powerpc/bus_machdep.c standard
1) Add busdma machdep code. 2) Add bus_pio.h and bus_memio.h (which do nothing). Submitted by: Peter Grehan <peterg@ptree32.com.au> (1)
2002-07-09 12:47:14 +00:00
powerpc/powerpc/busdma_machdep.c standard
Replace the two almost-exactly-identical AIM and Book-E clock.c implementations with a single one after the application of a very small amount of #ifdef.
2013-10-20 16:37:03 +00:00
powerpc/powerpc/clock.c standard
powerpc: Use IFUNCs for copyin/copyout/etc Summary: Radix on AIM, and all of Book-E (currently), can do direct addressing of user space, instead of needing to map user addresses into kernel space. Take advantage of this to optimize the copy(9) functions for this behavior, and avoid effectively NOP translations. Test Plan: Tested on powerpcspe, powerpc64/booke, powerpc64/AIM Reviewed by: bdragon Differential Revision: https://reviews.freebsd.org/D25129
2020-06-06 03:09:12 +00:00
powerpc/powerpc/copyinout.c optional aim
Add cpu.c. This contains one exported function, cpu_setup(), which handles setup of and printing information about cpus. Obtained from: NetBSD (parts)
2003-02-05 12:09:53 +00:00
powerpc/powerpc/cpu.c standard
[PowerPC64LE] Set up powerpc.powerpc64le architecture This is the initial set up for PowerPC64LE. The current plan is for this arch to remain experimental for FreeBSD 13. This started as a weekend learning project for me and kinda snowballed from there. (More to follow momentarily.) Reviewed by: imp (earlier version), emaste Sponsored by: Tag1 Consulting, Inc. Differential Revision: https://reviews.freebsd.org/D26399
2020-09-22 23:49:30 +00:00
powerpc/powerpc/cpu_subr64.S optional powerpc64 | powerpc64le
Sort.
2007-12-14 23:47:39 +00:00
powerpc/powerpc/db_disasm.c optional ddb
powerpc/powerpc/db_hwwatch.c optional ddb
powerpc/powerpc/db_interface.c optional ddb
powerpc/powerpc/db_trace.c optional ddb
PowerPC, meet kernel core dumps. The support is based on a generic dumper that creates an ELF core file and uses PMAP functions to scan and iterate over memory chunks, as well as handle memory mappings used during dumping. the PMAP layer can choose to return physical memory chunks or virtual memory chunks. For minidumps, the chunks should be virtual. The default MMU I/F implementation for the scan_md() method returns NULL. Thus, when a PMAP implementation does not implement the required methods, an empty core file is created. Here, empty means having an ELF header only. Obtained from: Juniper Networks
2009-04-04 02:12:37 +00:00
powerpc/powerpc/dump_machdep.c standard
Create a new MACHINE_ARCH for Freescale PowerPC e500v2 Summary: The Freescale e500v2 PowerPC core does not use a standard FPU. Instead, it uses a Signal Processing Engine (SPE)--a DSP-style vector processor unit, which doubles as a FPU. The PowerPC SPE ABI is incompatible with the stock powerpc ABI, so a new MACHINE_ARCH was created to deal with this. Additionaly, the SPE opcodes overlap with Altivec, so these are mutually exclusive. Taking advantage of this fact, a new file, powerpc/booke/spe.c, was created with the same function set as in powerpc/powerpc/altivec.c, so it becomes effectively a drop-in replacement. setjmp/longjmp were modified to save the upper 32-bits of the now-64-bit GPRs (upper 32-bits are only accessible by the SPE). Note: This does _not_ support the SPE in the e500v1, as the e500v1 SPE does not support double-precision floating point. Also, without a new MACHINE_ARCH it would be impossible to provide binary packages which utilize the SPE. Additionally, no work has been done to support ports, work is needed for this. This also means no newer gcc can yet be used. However, gcc's powerpc support has been refactored which would make adding a powerpcspe-freebsd target very easy. Test Plan: This was lightly tested on a RouterBoard RB800 and an AmigaOne A1222 (P1022-based) board, compiled against the new ABI. Base system utilities (/bin/sh, /bin/ls, etc) still function appropriately, the system is able to boot multiuser. Reviewed By: bdrewery, imp Relnotes: yes Differential Revision: https://reviews.freebsd.org/D5683
2016-10-22 01:57:15 +00:00
powerpc/powerpc/elf32_machdep.c optional powerpc | powerpcspe | compat_freebsd32
[PowerPC64LE] Set up powerpc.powerpc64le architecture This is the initial set up for PowerPC64LE. The current plan is for this arch to remain experimental for FreeBSD 13. This started as a weekend learning project for me and kinda snowballed from there. (More to follow momentarily.) Reviewed by: imp (earlier version), emaste Sponsored by: Tag1 Consulting, Inc. Differential Revision: https://reviews.freebsd.org/D26399
2020-09-22 23:49:30 +00:00
powerpc/powerpc/elf64_machdep.c optional powerpc64 | powerpc64le
Unify ABI-related bits of the Book-E and AIM machdep routines (exec_setregs, etc.) in order to simplify the addition of 64-bit support, and possible future extension of the Book-E code to handle hard floating point and Altivec. MFC after: 1 month
2010-07-12 16:08:07 +00:00
powerpc/powerpc/exec_machdep.c standard
Split the function of the PCB_FPU flags into two: PCB_FPU now indicates that the actual FPU is enabled, while PCB_FPREGS indicates that the FPU state structure in the PCB is valid. This separation reflects the situation on FPU-less systems in which the FP state is used by the emulator but we don't actually want to try to turn on the non-existant FPU. Use this flag to save and restore FP regs properly on both AIM and Book-E. As a side effect, this sets up hard-FP and Altivec on Book-E CPUs with such abilities except for a trap handler to call enable_fpu()/enable_altivec().
2013-11-17 14:44:22 +00:00
powerpc/powerpc/fpu.c standard
Add skeletal support for GDB. In particular gdb_cpu_getreg() needs implementing to make GDB support usable.
2006-08-24 21:52:11 +00:00
powerpc/powerpc/gdb_machdep.c optional gdb
Merge booke and aim interrupt.c files. Summary: Both booke and AIM interrupt.c files contain nearly identical code. This merges the two files, to reduce duplication. Reviewers: #powerpc, marcel Reviewed By: marcel Subscribers: imp Differential Revision: https://reviews.freebsd.org/D2991
2015-07-06 05:08:57 +00:00
powerpc/powerpc/interrupt.c standard
Add interrupt handling support code. I've tried to make this fairly platform-independant as some PowerPC platforms may not have openpic-style interrupt controllers. This may not have the best performance but it works for now.
2002-07-09 11:12:20 +00:00
powerpc/powerpc/intr_machdep.c standard
Provide a simple IOMMU framework on PowerPC, which is required to support PPC hypervisors.
2010-12-03 16:37:37 +00:00
powerpc/powerpc/iommu_if.m standard
Also happened to miss this in r282264.
2015-04-30 04:44:41 +00:00
powerpc/powerpc/machdep.c standard
Sort.
2007-12-14 23:47:39 +00:00
powerpc/powerpc/mem.c optional mem
[PowerPC64LE] Set up powerpc.powerpc64le architecture This is the initial set up for PowerPC64LE. The current plan is for this arch to remain experimental for FreeBSD 13. This started as a weekend learning project for me and kinda snowballed from there. (More to follow momentarily.) Reviewed by: imp (earlier version), emaste Sponsored by: Tag1 Consulting, Inc. Differential Revision: https://reviews.freebsd.org/D26399
2020-09-22 23:49:30 +00:00
powerpc/powerpc/minidump_machdep.c optional powerpc64 | powerpc64le
mp_machdep.c is only conditional upon smp, not aim. If booke grows support for smp, mp_machdep.c needs to be included as well.
2008-04-30 00:50:50 +00:00
powerpc/powerpc/mp_machdep.c optional smp
Since the PS3 port was committed, the AIM nexus device works perfectly fine on all PowerPC platforms, whether or not they have Open Firmware. Remove some more duplication and have there be only one nexus driver.
2013-10-20 18:40:55 +00:00
powerpc/powerpc/nexus.c standard
Driver for OpenPIC compatible interrupt controllers. It's fairly PowerMac specific at the moment, but that should be fixable.
2002-07-09 11:26:10 +00:00
powerpc/powerpc/openpic.c standard
Add interrupt handling support code. I've tried to make this fairly platform-independant as some PowerPC platforms may not have openpic-style interrupt controllers. This may not have the best performance but it works for now.
2002-07-09 11:12:20 +00:00
powerpc/powerpc/pic_if.m standard
Insert a layer of indirection to the pmap code, using a kobj for the interface. This allows run-time selection of MMU code, based on CPU-type detection, or tunable-overrides when testing new code. Pre-requisite for G5 support. conf/files.powerpc - remove pmap.c - add mmu_if.h, mmu_oea.c, pmap_dispatch.c powerpc/include/mmuvar.h - definitions for MMU implementations powerpc/include/pmap.h - remove pmap_pte_spill declaration - add pmap_mmu_install declaration - size the phys_avail array - pmap_bootstrapped is now global-scope powerpc/powerpc/machdep.c - call kobj_machdep_init early in the boot sequence to allow kobj usage prior to SI_SUB_LOCK - install the OEA pmap code. This will be moved to CPU-specific init code in the future. powerpc/powerpc/mmu_if.m - Kobj MMU interface definitions powerpc/powerpc/pmap_dispatch.c - central dispatch for pmap calls - contains the global mmu kobj and the routine to locate the the mmu implementation and init the kobj
2005-11-08 06:48:08 +00:00
powerpc/powerpc/pmap_dispatch.c standard
Factor out platform dependent things unrelated to device drivers into a new platform module. These are probed in early boot, and have the responsibility of determining the layout of physical memory, determining the CPU timebase frequency, and handling the zoo of SMP mechanisms found on PowerPC. Reviewed by: marcel, raj Book-E parts by: raj
2009-05-14 00:34:26 +00:00
powerpc/powerpc/platform.c standard
powerpc/powerpc/platform_if.m standard
Add Altivec/VMX register support to ptrace. MFC after: 2 weeks Relnotes: yes
2015-01-14 07:01:21 +00:00
powerpc/powerpc/ptrace_machdep.c standard
Add syscons files, and also generate a syscons font since Apple SVGA adapters don't have one available in their ROMs.
2004-01-21 05:19:59 +00:00
powerpc/powerpc/sc_machdep.c optional sc
Add setjmp (needed for DDB).
2002-07-10 12:26:17 +00:00
powerpc/powerpc/setjmp.S standard
Create a new MACHINE_ARCH for Freescale PowerPC e500v2 Summary: The Freescale e500v2 PowerPC core does not use a standard FPU. Instead, it uses a Signal Processing Engine (SPE)--a DSP-style vector processor unit, which doubles as a FPU. The PowerPC SPE ABI is incompatible with the stock powerpc ABI, so a new MACHINE_ARCH was created to deal with this. Additionaly, the SPE opcodes overlap with Altivec, so these are mutually exclusive. Taking advantage of this fact, a new file, powerpc/booke/spe.c, was created with the same function set as in powerpc/powerpc/altivec.c, so it becomes effectively a drop-in replacement. setjmp/longjmp were modified to save the upper 32-bits of the now-64-bit GPRs (upper 32-bits are only accessible by the SPE). Note: This does _not_ support the SPE in the e500v1, as the e500v1 SPE does not support double-precision floating point. Also, without a new MACHINE_ARCH it would be impossible to provide binary packages which utilize the SPE. Additionally, no work has been done to support ports, work is needed for this. This also means no newer gcc can yet be used. However, gcc's powerpc support has been refactored which would make adding a powerpcspe-freebsd target very easy. Test Plan: This was lightly tested on a RouterBoard RB800 and an AmigaOne A1222 (P1022-based) board, compiled against the new ABI. Base system utilities (/bin/sh, /bin/ls, etc) still function appropriately, the system is able to boot multiuser. Reviewed By: bdrewery, imp Relnotes: yes Differential Revision: https://reviews.freebsd.org/D5683
2016-10-22 01:57:15 +00:00
powerpc/powerpc/sigcode32.S optional powerpc | powerpcspe | compat_freebsd32
[PowerPC64LE] Set up powerpc.powerpc64le architecture This is the initial set up for PowerPC64LE. The current plan is for this arch to remain experimental for FreeBSD 13. This started as a weekend learning project for me and kinda snowballed from there. (More to follow momentarily.) Reviewed by: imp (earlier version), emaste Sponsored by: Tag1 Consulting, Inc. Differential Revision: https://reviews.freebsd.org/D26399
2020-09-22 23:49:30 +00:00
powerpc/powerpc/sigcode64.S optional powerpc64 | powerpc64le
Create a new MACHINE_ARCH for Freescale PowerPC e500v2 Summary: The Freescale e500v2 PowerPC core does not use a standard FPU. Instead, it uses a Signal Processing Engine (SPE)--a DSP-style vector processor unit, which doubles as a FPU. The PowerPC SPE ABI is incompatible with the stock powerpc ABI, so a new MACHINE_ARCH was created to deal with this. Additionaly, the SPE opcodes overlap with Altivec, so these are mutually exclusive. Taking advantage of this fact, a new file, powerpc/booke/spe.c, was created with the same function set as in powerpc/powerpc/altivec.c, so it becomes effectively a drop-in replacement. setjmp/longjmp were modified to save the upper 32-bits of the now-64-bit GPRs (upper 32-bits are only accessible by the SPE). Note: This does _not_ support the SPE in the e500v1, as the e500v1 SPE does not support double-precision floating point. Also, without a new MACHINE_ARCH it would be impossible to provide binary packages which utilize the SPE. Additionally, no work has been done to support ports, work is needed for this. This also means no newer gcc can yet be used. However, gcc's powerpc support has been refactored which would make adding a powerpcspe-freebsd target very easy. Test Plan: This was lightly tested on a RouterBoard RB800 and an AmigaOne A1222 (P1022-based) board, compiled against the new ABI. Base system utilities (/bin/sh, /bin/ls, etc) still function appropriately, the system is able to boot multiuser. Reviewed By: bdrewery, imp Relnotes: yes Differential Revision: https://reviews.freebsd.org/D5683
2016-10-22 01:57:15 +00:00
powerpc/powerpc/swtch32.S optional powerpc | powerpcspe
[PowerPC64LE] Set up powerpc.powerpc64le architecture This is the initial set up for PowerPC64LE. The current plan is for this arch to remain experimental for FreeBSD 13. This started as a weekend learning project for me and kinda snowballed from there. (More to follow momentarily.) Reviewed by: imp (earlier version), emaste Sponsored by: Tag1 Consulting, Inc. Differential Revision: https://reviews.freebsd.org/D26399
2020-09-22 23:49:30 +00:00
powerpc/powerpc/swtch64.S optional powerpc64 | powerpc64le
Break out stack(9) from ddb(4): - Introduce per-architecture stack_machdep.c to hold stack_save(9). - Introduce per-architecture machine/stack.h to capture any common definitions required between db_trace.c and stack_machdep.c. - Add new kernel option "options STACK"; we will build in stack(9) if it is defined, or also if "options DDB" is defined to provide compatibility with existing users of stack(9). Add new stack_save_td(9) function, which allows the capture of a stacktrace of another thread rather than the current thread, which the existing stack_save(9) was limited to. It requires that the thread be neither swapped out nor running, which is the responsibility of the consumer to enforce. Update stack(9) man page. Build tested: amd64, arm, i386, ia64, powerpc, sparc64, sun4v Runtime tested: amd64 (rwatson), arm (cognet), i386 (rwatson)
2007-12-02 20:40:35 +00:00
powerpc/powerpc/stack_machdep.c optional ddb | stack
[PowerPC64LE] Set up powerpc.powerpc64le architecture This is the initial set up for PowerPC64LE. The current plan is for this arch to remain experimental for FreeBSD 13. This started as a weekend learning project for me and kinda snowballed from there. (More to follow momentarily.) Reviewed by: imp (earlier version), emaste Sponsored by: Tag1 Consulting, Inc. Differential Revision: https://reviews.freebsd.org/D26399
2020-09-22 23:49:30 +00:00
powerpc/powerpc/support.S optional powerpc64 | powerpc64le | booke
The final commit for the first phase of PowerPC support. This adds the config stuff needed to build kernels. Reviewed by: obrien
2001-06-17 09:39:44 +00:00
powerpc/powerpc/syncicache.c standard
powerpc/powerpc/sys_machdep.c standard
Add file missed in r281096.
2015-04-05 02:43:36 +00:00
powerpc/powerpc/trap.c standard
Add support for 64-bit PowerPC CPUs operating in the 64-bit bridge mode provided, for example, on the PowerPC 970 (G5), as well as on related CPUs like the POWER3 and POWER4. This also adds support for various built-in hardware found on Apple G5 hardware (e.g. the IBM CPC925 northbridge). Reviewed by: grehan
2009-04-04 00:22:44 +00:00
powerpc/powerpc/uio_machdep.c standard
Also happened to miss this in r282264.
2015-04-30 04:44:41 +00:00
powerpc/powerpc/uma_machdep.c standard
Unify the AIM and Book-E vm_machdep.c implementations, which previously differed only with respect to the AIM version not following style(9) and some additional features for 64-bit systems and machines with direct maps in the AIM implementation that are no-ops on Book-E (at least for now).
2013-10-20 16:14:03 +00:00
powerpc/powerpc/vm_machdep.c standard
Import support for the Sony Playstation 3 using the OtherOS feature available on firmwares 3.15 and earlier. Caveats: Support for the internal SATA controller is currently missing, as is support for framebuffer resolutions other than 720x480. These deficiencies will be remedied soon. Special thanks to Peter Grehan for providing the hardware that made this port possible, and thanks to Geoff Levand of Sony Computer Entertainment for advice on the LV1 hypervisor.
2011-01-06 04:12:29 +00:00
powerpc/ps3/ehci_ps3.c optional ps3 ehci
Add an OHCI driver to complement the EHCI one. The infrastructure to attach both to the parent ps3bus was in r223313. This driver itself comes from the ps3 project branch.
2011-06-20 00:46:07 +00:00
powerpc/ps3/ohci_ps3.c optional ps3 ohci
Import support for the Sony Playstation 3 using the OtherOS feature available on firmwares 3.15 and earlier. Caveats: Support for the internal SATA controller is currently missing, as is support for framebuffer resolutions other than 720x480. These deficiencies will be remedied soon. Special thanks to Peter Grehan for providing the hardware that made this port possible, and thanks to Geoff Levand of Sony Computer Entertainment for advice on the LV1 hypervisor.
2011-01-06 04:12:29 +00:00
powerpc/ps3/if_glc.c optional ps3 glc
powerpc/ps3/mmu_ps3.c optional ps3
powerpc/ps3/platform_ps3.c optional ps3
powerpc/ps3/ps3bus.c optional ps3
Add support for the Blu-Ray drive found in the Sony Playstation 3 and fix some realted minor bugs in PS3 internal storage support. Submitted by: glevand <geoffrey.levand@mail.ru> Approved by: re (bz)
2011-08-14 00:20:37 +00:00
powerpc/ps3/ps3cdrom.c optional ps3 scbus
Driver for PS3's internal hard disk. Hopefully this can be CAM-ified in the future, but presents a set of simple block devices for now. With (forthcoming) boot loader support or vfs.root.mountfrom, allows booting PS3s from disk. Submitted by: glevand <geoffrey.levand@mail.ru>
2011-06-20 00:17:44 +00:00
powerpc/ps3/ps3disk.c optional ps3
Import support for the Sony Playstation 3 using the OtherOS feature available on firmwares 3.15 and earlier. Caveats: Support for the internal SATA controller is currently missing, as is support for framebuffer resolutions other than 720x480. These deficiencies will be remedied soon. Special thanks to Peter Grehan for providing the hardware that made this port possible, and thanks to Geoff Levand of Sony Computer Entertainment for advice on the LV1 hypervisor.
2011-01-06 04:12:29 +00:00
powerpc/ps3/ps3pic.c optional ps3
Move the PS3 framebuffer console to use vt instead of syscons and adjust GENERIC64 for PowerPC to use vt with it. Much to my chagrin, PS3 support seems to have bitrotted somewhat since the last time I tried it. ehci panics on attach and interrupt handling seems to be faulty. This should be fixed soon...
2014-05-11 05:49:35 +00:00
powerpc/ps3/ps3_syscons.c optional ps3 vt
powerpc/ps3/ps3-hvcall.S optional ps3
[PowerPC64LE] Set up powerpc.powerpc64le architecture This is the initial set up for PowerPC64LE. The current plan is for this arch to remain experimental for FreeBSD 13. This started as a weekend learning project for me and kinda snowballed from there. (More to follow momentarily.) Reviewed by: imp (earlier version), emaste Sponsored by: Tag1 Consulting, Inc. Differential Revision: https://reviews.freebsd.org/D26399
2020-09-22 23:49:30 +00:00
powerpc/pseries/phyp-hvcall.S optional pseries powerpc64 | pseries powerpc64le
powerpc/pseries/mmu_phyp.c optional pseries powerpc64 | pseries powerpc64le
powerpc/pseries/phyp_console.c optional pseries powerpc64 uart | pseries powerpc64le uart
powerpc/pseries/phyp_dbg.c optional pseries powerpc64 gdb | pseries powerpc64le gdb
Add initial driver for POWER hypervisor interpartition ethernet. This is sufficient to pass traffic but needs some more work before merging to STABLE.
2013-10-20 01:31:09 +00:00
powerpc/pseries/phyp_llan.c optional llan
[PowerPC64LE] Set up powerpc.powerpc64le architecture This is the initial set up for PowerPC64LE. The current plan is for this arch to remain experimental for FreeBSD 13. This started as a weekend learning project for me and kinda snowballed from there. (More to follow momentarily.) Reviewed by: imp (earlier version), emaste Sponsored by: Tag1 Consulting, Inc. Differential Revision: https://reviews.freebsd.org/D26399
2020-09-22 23:49:30 +00:00
powerpc/pseries/phyp_vscsi.c optional pseries powerpc64 scbus | pseries powerpc64le scbus
Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib)
2013-09-17 17:37:04 +00:00
powerpc/pseries/platform_chrp.c optional pseries
[PowerPC64LE] Set up powerpc.powerpc64le architecture This is the initial set up for PowerPC64LE. The current plan is for this arch to remain experimental for FreeBSD 13. This started as a weekend learning project for me and kinda snowballed from there. (More to follow momentarily.) Reviewed by: imp (earlier version), emaste Sponsored by: Tag1 Consulting, Inc. Differential Revision: https://reviews.freebsd.org/D26399
2020-09-22 23:49:30 +00:00
powerpc/pseries/plpar_iommu.c optional pseries powerpc64 | pseries powerpc64le
powerpc/pseries/plpar_pcibus.c optional pseries powerpc64 pci | pseries powerpc64le pci
Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib)
2013-09-17 17:37:04 +00:00
powerpc/pseries/rtas_dev.c optional pseries
powerpc/pseries/rtas_pci.c optional pseries pci
[PowerPC64LE] Set up powerpc.powerpc64le architecture This is the initial set up for PowerPC64LE. The current plan is for this arch to remain experimental for FreeBSD 13. This started as a weekend learning project for me and kinda snowballed from there. (More to follow momentarily.) Reviewed by: imp (earlier version), emaste Sponsored by: Tag1 Consulting, Inc. Differential Revision: https://reviews.freebsd.org/D26399
2020-09-22 23:49:30 +00:00
powerpc/pseries/vdevice.c optional pseries powerpc64 | pseries powerpc64le
powerpc/pseries/xics.c optional pseries powerpc64 | pseries powerpc64le
Align.
2007-10-25 14:16:07 +00:00
powerpc/psim/iobus.c optional psim
powerpc/psim/ata_iobus.c optional ata psim
powerpc/psim/openpic_iobus.c optional psim
powerpc/psim/uart_iobus.c optional uart psim
Reference in New Issue Copy Permalink