MPFS is a logical switch in the Mellanox device which forward packets
based on a hardware driven L2 address table, to one or more physical-
or virtual- functions. The physical- or virtual- function is required
to tell the MPFS by using the MPFS firmware commands, which unicast
MAC addresses it is requesting from the physical port's traffic.
Broadcast and multicast traffic however, is copied to all listening
physical- and virtual- functions and does not need a rule in the MPFS
switching table.
Linux commit: eeb66cdb682678bfd1f02a4547e3649b38ffea7e
MFC after: 3 days
Sponsored by: Mellanox Technologies
This driver is for the usb phy present on rockchip SoC.
It only support RK3399 and host mode for now.
The driver expose the usb clock needed by the usb controller.
PLL_MIPI is the last important PLL that we missed.
Add support for it.
Since it's one of the possible parent for TCON0 also add this clock
now that we can.
While here add some info about what video related clocks should be
enabled at boot and with what frequency.
The REPRODUCIBLE_BUILD option is actually managed in two separate
files. src.opts.mk governs the setting for world builds and
kern.opts.mk governs it for kernel builds. r350550 only changed the
default for world builds.
Reported by: emaste
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D21444
use epoch don't need Makefile tweaks.
The downside is that any developer who wants EPOCH_TRACE needs to
rebuild kernel in full, but that's fine.
Reviewed by: imp
properly nested and warns about recursive entrances. Unlike with locks,
there is nothing fundamentally wrong with such use, the intent of tracer
is to help to review complex epoch-protected code paths, and we mean the
network stack here.
Reviewed by: hselasky
Sponsored by: Netflix
Pull Request: https://reviews.freebsd.org/D21610
is a completely separate TCP stack (tcp_bbr.ko) that will be built only if
you add the make options WITH_EXTRA_TCP_STACKS=1 and also include the option
TCPHPTS. You can also include the RATELIMIT option if you have a NIC interface that
supports hardware pacing, BBR understands how to use such a feature.
Note that this commit also adds in a general purpose time-filter which
allows you to have a min-filter or max-filter. A filter allows you to
have a low (or high) value for some period of time and degrade slowly
to another value has time passes. You can find out the details of
BBR by looking at the original paper at:
https://queue.acm.org/detail.cfm?id=3022184
or consult many other web resources you can find on the web
referenced by "BBR congestion control". It should be noted that
BBRv1 (which this is) does tend to unfairness in cases of small
buffered paths, and it will usually get less bandwidth in the case
of large BDP paths(when competing with new-reno or cubic flows). BBR
is still an active research area and we do plan on implementing V2
of BBR to see if it is an improvement over V1.
Sponsored by: Netflix Inc.
Differential Revision: https://reviews.freebsd.org/D21582
BERI stands for Bluespec Extensible RISC Implementation, based on MIPS.
BERI has not implemented standard MIPS perfomance monitoring counters,
instead it provides statistical counters.
BERI statcounters have a several limitations:
- They can't be written
- They don't support start/stop operation
- None of hardware interrupt is provided on a counter overflow.
So make it separate to hwpmc_mips module and support process/system
counting mode only.
Sponsored by: DARPA, AFRL
Add a very basic NVRAM driver for OPAL which can be used by the IBM
powerpc-utils nvram utility, not to be confused with the base nvram utility,
which only operates on powermac_nvram.
The IBM utility handles all partitions itself, treating the nvram device as
a plain store.
An alternative would be to manage partitions in the kernel, and augment the
base nvram utility to deal with different backing stores, but that
complicates the driver significantly. Instead, present the same interface
IBM's utlity expects, and we get the usage for free.
Tested by: bdragon
Intel Stratix 10 SoC includes a quad-core arm64 cluster and FPGA fabric.
This adds support for reconfiguring FPGA.
Accessing FPGA core of this SoC require the level of privilege EL3,
while kernel runs in EL1 (lower) level of privilege.
This provides an Intel service layer interface that uses SMCCC to pass
queries to the secure-monitor (EL3).
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D21454
PSCI code to use it.
This interface will also be used by Intel Stratix 10 platform.
This was not tested on arm due to lack of PSCI-enabled arm hardware
lying around.
Reviewed by: andrew
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D21439
binaries (e.g. on any arch except amd64 and mips).
Otherwise, with lld 9, after https://reviews.llvm.org/rLLD356117, the
modules will get an additional PT_LOAD segment, which blows up kldxref,
since that has a hardcoded limit of 3 segments.
I could have alternatively bumped up that limit, but since kernel
modules do not use relro, the simplest workaround is to explicitly
disable it.
This makes clearing it (from locore.S) work without misaligned accesses
(which can trap to machine mode, and be slow).
Reviewed by: br
Sponsored by: Axiado
Differential Revision: https://reviews.freebsd.org/D21538
Use the -march and -mabi flags for both gcc and clang as they are
compatible. Specify the "medium" code model separately as it goes by the
name "medany" under gcc, although they are equivalent.
Reviewed by: markj
Approved by: markj (mentor)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D21436
Currently LOCAL_MODULES= works, but LOCAL_MODULES="" causes build errors as
.for still has the empty string to loop over. An .if empty prior to the loop
was considered, but LOCAL_MODULES has empty quotes at that point and thus,
isn't empty. A better solution likely exists, but this floats us by for
now...
KTLS adds support for in-kernel framing and encryption of Transport
Layer Security (1.0-1.2) data on TCP sockets. KTLS only supports
offload of TLS for transmitted data. Key negotation must still be
performed in userland. Once completed, transmit session keys for a
connection are provided to the kernel via a new TCP_TXTLS_ENABLE
socket option. All subsequent data transmitted on the socket is
placed into TLS frames and encrypted using the supplied keys.
Any data written to a KTLS-enabled socket via write(2), aio_write(2),
or sendfile(2) is assumed to be application data and is encoded in TLS
frames with an application data type. Individual records can be sent
with a custom type (e.g. handshake messages) via sendmsg(2) with a new
control message (TLS_SET_RECORD_TYPE) specifying the record type.
At present, rekeying is not supported though the in-kernel framework
should support rekeying.
KTLS makes use of the recently added unmapped mbufs to store TLS
frames in the socket buffer. Each TLS frame is described by a single
ext_pgs mbuf. The ext_pgs structure contains the header of the TLS
record (and trailer for encrypted records) as well as references to
the associated TLS session.
KTLS supports two primary methods of encrypting TLS frames: software
TLS and ifnet TLS.
Software TLS marks mbufs holding socket data as not ready via
M_NOTREADY similar to sendfile(2) when TLS framing information is
added to an unmapped mbuf in ktls_frame(). ktls_enqueue() is then
called to schedule TLS frames for encryption. In the case of
sendfile_iodone() calls ktls_enqueue() instead of pru_ready() leaving
the mbufs marked M_NOTREADY until encryption is completed. For other
writes (vn_sendfile when pages are available, write(2), etc.), the
PRUS_NOTREADY is set when invoking pru_send() along with invoking
ktls_enqueue().
A pool of worker threads (the "KTLS" kernel process) encrypts TLS
frames queued via ktls_enqueue(). Each TLS frame is temporarily
mapped using the direct map and passed to a software encryption
backend to perform the actual encryption.
(Note: The use of PHYS_TO_DMAP could be replaced with sf_bufs if
someone wished to make this work on architectures without a direct
map.)
KTLS supports pluggable software encryption backends. Internally,
Netflix uses proprietary pure-software backends. This commit includes
a simple backend in a new ktls_ocf.ko module that uses the kernel's
OpenCrypto framework to provide AES-GCM encryption of TLS frames. As
a result, software TLS is now a bit of a misnomer as it can make use
of hardware crypto accelerators.
Once software encryption has finished, the TLS frame mbufs are marked
ready via pru_ready(). At this point, the encrypted data appears as
regular payload to the TCP stack stored in unmapped mbufs.
ifnet TLS permits a NIC to offload the TLS encryption and TCP
segmentation. In this mode, a new send tag type (IF_SND_TAG_TYPE_TLS)
is allocated on the interface a socket is routed over and associated
with a TLS session. TLS records for a TLS session using ifnet TLS are
not marked M_NOTREADY but are passed down the stack unencrypted. The
ip_output_send() and ip6_output_send() helper functions that apply
send tags to outbound IP packets verify that the send tag of the TLS
record matches the outbound interface. If so, the packet is tagged
with the TLS send tag and sent to the interface. The NIC device
driver must recognize packets with the TLS send tag and schedule them
for TLS encryption and TCP segmentation. If the the outbound
interface does not match the interface in the TLS send tag, the packet
is dropped. In addition, a task is scheduled to refresh the TLS send
tag for the TLS session. If a new TLS send tag cannot be allocated,
the connection is dropped. If a new TLS send tag is allocated,
however, subsequent packets will be tagged with the correct TLS send
tag. (This latter case has been tested by configuring both ports of a
Chelsio T6 in a lagg and failing over from one port to another. As
the connections migrated to the new port, new TLS send tags were
allocated for the new port and connections resumed without being
dropped.)
ifnet TLS can be enabled and disabled on supported network interfaces
via new '[-]txtls[46]' options to ifconfig(8). ifnet TLS is supported
across both vlan devices and lagg interfaces using failover, lacp with
flowid enabled, or lacp with flowid enabled.
Applications may request the current KTLS mode of a connection via a
new TCP_TXTLS_MODE socket option. They can also use this socket
option to toggle between software and ifnet TLS modes.
In addition, a testing tool is available in tools/tools/switch_tls.
This is modeled on tcpdrop and uses similar syntax. However, instead
of dropping connections, -s is used to force KTLS connections to
switch to software TLS and -i is used to switch to ifnet TLS.
Various sysctls and counters are available under the kern.ipc.tls
sysctl node. The kern.ipc.tls.enable node must be set to true to
enable KTLS (it is off by default). The use of unmapped mbufs must
also be enabled via kern.ipc.mb_use_ext_pgs to enable KTLS.
KTLS is enabled via the KERN_TLS kernel option.
This patch is the culmination of years of work by several folks
including Scott Long and Randall Stewart for the original design and
implementation; Drew Gallatin for several optimizations including the
use of ext_pgs mbufs, the M_NOTREADY mechanism for TLS records
awaiting software encryption, and pluggable software crypto backends;
and John Baldwin for modifications to support hardware TLS offload.
Reviewed by: gallatin, hselasky, rrs
Obtained from: Netflix
Sponsored by: Netflix, Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D21277
The netmap_pt.c module has become obsolete after
the refactoring that added netmap_kloop.c.
Remove it and unlink it from the build system.
MFC after: 1 week
Many arm kernel configs bogusly specified WERROR=-Werror. There's no
reason for this because the default is that and there's no reason to
override. These date from a time when we needed to add additional
warning->error suppression. They are obsolete and were cut and paste
propagated from file to file.
Comment out all the WERROR=.... lines in powerpc. They aren't bogus,
but were appropriate for the old defaults for gcc4.2.1. Now that we've
made the policy decision to suppress -Werror by default on these
platforms, it is appropriate to comment these out. People wishing to
fix these errors can still un-comment them out, or say WERROR=-Werror
on the command line.
Fix two instances (cut and paste propagation) of hard-coded -Werror
in x86 code. Replace with ${WERROR} instead. This is a no-op change
except for people who build WERROR=-Wno-error :).
This should fix tinderbox / CI breakage.
Strip comments from the NOTES.armv[57] files as is done for other
NOTES files when building the corresponding LINT configs. Without
this, the LINT configs contained the NO_UNIVERSE comment from the
NOTES.armv[57] files.
Reviewed by: imp
MFC after: 1 week
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21264
As part of marching gcc 4.2.1 out of the tree, turn off -Werror on gcc 4.2.1
compiles by default. It generates too many false positives and breaks CI
for no benefit.
Discussed on: arch@
Reviewed by: jhb@, emaste@, pfg@
Differential Revision: https://reviews.freebsd.org/D21378
Intel has created RST and many laptops from vendors like Lenovo and Asus. It's a
mechanism for creating multiple boot devices under windows. It effectively hides
the nvme drive inside of the ahci controller. The details are supposed to be a
trade secret. However, there's a reverse engineered Linux driver, and this
implements similar operations to allow nvme drives to attach. The ahci driver
attaches nvme children that proxy the remapped resources to the child. nvme_ahci
is just like nvme_pci, except it doesn't do the PCI specific things. That's
moved into ahci where appropriate.
When the nvme drive is remapped, MSI-x interrupts aren't forwarded (the linux
driver doesn't know how to use this either). INTx interrupts are used
instead. This is suboptimal, but usually sufficient for the laptops these parts
are in.
This is based loosely on https://www.spinics.net/lists/linux-ide/msg53364.html
submitted, but not accepted by, Linux. It was written by Dan Williams. These
changes were written from scratch by Olivier Houchard.
Submitted by: cognet@ (Olivier Houchard)
Nvme drives can be attached in a number of different ways. Separate out the PCI
attachment so that we can have other attachment types, like ahci and various
types of NVMeoF.
Submitted by: cognet@
Add helper function for synchronous execution of HCI commands at probe
stage and use this function to check firmware state of Intel Wireless
8260/8265 bluetooth devices found in many post 2016 year laptops.
Attempt to initialize FreeBSD bluetooth stack while such a device is in
bootloader mode locks the adapter hardly so it requires power on/off
cycle to restore.
This change blocks ng_ubt attachment unless operational firmware is
loaded thus preventing the lock up.
PR: 237083
Reviewed by: hps, emax
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D21071
NTB Tool driver is meant for testing NTB hardware driver functionalities,
such as doorbell interrupts, link events, scratchpad registers and memory
windows. This is a port of ntb_tool driver from Linux. It has been
verified on top of AMD and PLX NTB HW drivers.
Submitted by: Arpan Palit <arpan.palit@amd.com>
Cleaned up by: mav
MFC after: 2 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D18819
enough that unification will have to wait for the next pass.
Reviewed by: jhb (verbal OK on irc)
Differential Revision: https://reviews.freebsd.org/D21248
specific, and only builds there. Likewise the module is built there. Move it to
the x86-only files.x86.
Reviewed by: jhb (verbal OK on irc)
Differential Revision: https://reviews.freebsd.org/D21248
Apart from one MD file, ACPI is a x86 implementation, not specific to either
i386 or amd64, so put it into files.x86. Other architectures include fewer
files for the same options, so it can't move into the MI files file.
Reviewed by: jhb (verbal OK on irc)
Differential Revision: https://reviews.freebsd.org/D21248
VIA Padlock support is for VIA C3, C7 and Eden processors, which are 64bit x86
processors.
Reviewed by: jhb (verbal OK on irc)
Differential Revision: https://reviews.freebsd.org/D21248
The HPT drivers are all x86 only. Move them to files.x86. Because of the way we
run uudecode, we can use $M instead of needing entries for them in separate
files.
Reviewed by: jhb (verbal OK on irc)
Differential Revision: https://reviews.freebsd.org/D21248
Move all the identical x86 lines to files.x86. The non-identical ones should be
unified and moved as well, but that would require additional changes that would
need a more careful review and may not be MFCable, so I'll do them
separately. I'll delete the mildly snarky comment when things are unified.
Reviewed by: jhb (verbal OK on irc)
Differential Revision: https://reviews.freebsd.org/D21248
The Zstd format bumps the CLOOP major number to 4 to avoid incompatibility
with older systems. Support in geom_uzip(4) is conditional on the ZSTDIO
kernel option, which is enabled in amd64 GENERIC, but not all in-tree
configurations.
mkuzip(8) was modified slightly to always initialize the nblocks + 1'th
offset in the CLOOP file format. Previously, it was only initialized in the
case where the final compressed block happened to be unaligned w.r.t.
DEV_BSIZE. The "Fake" last+1 block change in r298619 means that the final
compressed block's 'blen' was never correct unless the compressed uzip image
happened to be BSIZE-aligned. This happened in about 1 out of every 512
cases. The zlib and lzma decompressors are probably tolerant of extra trash
following the frame they were told to decode, but Zstd complains that the
input size is incorrect.
Correspondingly, geom_uzip(4) was modified slightly to avoid trashing the
nblocks + 1'th offset when it is known to be initialized to a good value.
This corrects the calculated final real cluster compressed length to match
that printed by mkuzip(8).
mkuzip(8) was refactored somewhat to reduce code duplication and increase
ease of adding other compression formats.
* Input block size validation was pulled out of individual compression
init routines into main().
* Init routines now validate a user-provided compression level or select
an algorithm-specific default, if none was provided.
* A new interface for calculating the maximal compressed size of an
incompressible input block was added for each driver. The generic code
uses it to validate against MAXPHYS as well as to allocate compression
result buffers in the generic code.
* Algorithm selection is now driven by a table lookup, to increase ease of
adding other formats in the future.
mkuzip(8) gained the ability to explicitly specify a compression level with
'-C'. The prior defaults -- 9 for zlib and 6 for lzma -- are maintained.
The new zstd default is 9, to match zlib.
Rather than select lzma or zlib with '-L' or its absense, respectively, a
new argument '-A <algorithm>' is provided to select 'zlib', 'lzma', or
'zstd'. '-L' is considered deprecated, but will probably never be removed.
All of the new features were documented in mkuzip.8; the page was also
cleaned up slightly.
Relnotes: yes
Follow-up on r322318 and r322319 and remove the deprecated modules.
Shift some now-unused kernel files into userspace utilities that incorporate
them. Remove references to removed GEOM classes in userspace utilities.
Reviewed by: imp (earlier version)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D21249
tcpratelimit isn't supported as there's now atomic_add_64, so add it to the exclusion list
Add comment for why PPC_PROBE_CHIPSET is on the list
Remove UKBD_DFLT_KEYMAP now that ukbd works on all platforms.
files.x86 is for the parts of the system that are common to both i386 and amd64
due too their nature. First up, to get the ball rolling, is fdc, the floppy disk
support. It works only on amd64 and i386 these days, and that's unlikely to
change.
Reviewed by: jhb, cem (earlier versrions)
Differential Revision: https://reviews.freebsd.org/D21210
Move the floppy driver to the x86 specific notes file.
Reviewed by: jhb, manu, jhibbits, emaste
Differential Revision: https://reviews.freebsd.org/D21208
x86 needs sc, as does sparc64. powerpc doesn't use it by default, but some old
powermac notebooks do not work with vt yet for reasons unknonw. Even so, I've
removed it from powerpc LINT. It's not in daily use there, and the intent is to
100% switch to vt now that it works for that platform to limit support burden.
All the other architectures omit some or all of the screen savers from their
lint config. Move them to the x86 NOTES files and remove the exclusions. This
reduces slightly the number of savers sparc64 compiles, but since they are in
GENERIC, the overage is adequate and if someone reaelly wants to sort them out
in sparc64 they can sweat the details and the testing.
Reviewed by: jhb (earlier version), manu (earlier version), jhibbits
Differential Revision: https://reviews.freebsd.org/D21233
We used the aw_clk_nm clock for clock with only one divider factor
and used a fake multiplier factor. This cannot work properly as we
end up writing the "fake" factor to the register (and so always set
the LSB to 1).
Create a new clock for those.
The reason for not using the clk_div clock is because those clocks are
a bit special. Since they are (almost) all related to video we also need
to set the parent clock (the main PLL) to a frequency that they can support.
As the main PLL have some minimal frequency that they can support we need to
be able to set the main PLL to a multiple of the desired frequency.
Let say you want to have a 71Mhz pixel clock (typical for a 1280x800 display)
and the main PLL cannot go under 192Mhz, you need to set it to 3 times the
desired frequency and set the divider to 3 on the hdmi clock.
So this also introduce the CLK_SET_ROUND_MULTIPLE flag that allow for this kind
of scenario.
It is part of -Wformat, which is enabled by -Wall. Empty format strings are
well defined and it is perfectly reasonable to expect them in a formatting
interface.
with Communication Device Class Ethernet Emulation Model (CDC EEM).
The driver supports both the device, and host side operation; there
is a new USB template (#11) for the former.
This enables communication with virtual USB NIC provided by iLO 5,
as found in new HPE Proliant servers.
Reviewed by: hselasky
MFC after: 2 weeks
Relnotes: yes
Sponsored by: Hewlett Packard Enterprise
The exists() check guarding the invocation of ls was not working
correctly as it was expanding '$L' to determine the path of the local
modules directory. Fix by using {} around the variable name.
Inline some of the logic from bsd.subdir.mk when invoking local module
builds. This gives output in 'make buildkernel' the same as if there
was a Makefile in /usr/local/sys/modules with SUBDIR =
${LOCAL_MODULES}.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D20991
- UMA_XDOMAIN enables an additional per-cpu bucket for freed memory that
was freed on a different domain from where it was allocated. This is
only used for UMA_ZONE_NUMA (first-touch) zones.
- UMA_FIRSTTOUCH sets the default UMA policy to be first-touch for all
zones. This tries to maintain locality for kernel memory.
Reviewed by: gallatin, alc, kib
Tested by: pho, gallatin
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D20929
Instances of the device can be configured using hints or FDT data.
Interfaces to reconfigure the chip and extract voltage measurements from
it are available via sysctl(8).
an updated rack depend on having access to the new
ratelimit api in this commit.
Sponsored by: Netflix Inc.
Differential Revision: https://reviews.freebsd.org/D20953
In a git world this provides a facsimile of a monotonically increasing
version number. This might be refined further, but this provides a
starting point for investigation.
Reviewed by: cem
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20462
with an eventual goal to convert all legacl zlib callers to the new zlib
version:
* Move generic zlib shims that are not specific to zlib 1.0.4 to
sys/dev/zlib.
* Connect new zlib (1.2.11) to the zlib kernel module, currently built
with Z_SOLO.
* Prefix the legacy zlib (1.0.4) with 'zlib104_' namespace.
* Convert sys/opencrypto/cryptodeflate.c to use new zlib.
* Remove bundled zlib 1.2.3 from ZFS and adapt it to new zlib and make
it depend on the zlib module.
* Fix Z_SOLO build of new zlib.
PR: 229763
Submitted by: Yoshihiro Ota <ota j email ne jp>
Reviewed by: markm (sys/dev/zlib/zlib_kmod.c)
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D19706
It is assembled using "${CC} -x assembler-with-cpp", which by convention
(bsd.suffixes.mk) uses the .asm extension.
This is a portion of the review referenced below (D18344). That review
also renamed linux_support.s to .S, but that is a functional change
(using the compiler's integrated assembler instead of as) and will be
revisited separately.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18344
The current implementation of gzipped a.out support was based
on a very old version of InfoZIP which ships with an ancient
modified version of zlib, and was removed from the GENERIC
kernel in 1999 when we moved to an ELF world.
PR: 205822
Reviewed by: imp, kib, emaste, Yoshihiro Ota <ota at j.email.ne.jp>
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D21099
Terasic DE10-Pro (an Intel Stratix 10 GX/SX FPGA Development Kit).
The Altera EMAC is an instance of Synopsys DesignWare Gigabit MAC.
This driver sets correct clock range for MDIO interface on Intel Stratix 10
platform.
This is required due to lack of support for clock manager device for
this platform that could tell us the clock frequency value for ethernet
clock domain.
Sponsored by: DARPA, AFRL
Nothing uses these anymore. They were for super small armv4 boards without
uboot. We removed armv4 support before 13.0, but neglected to garbage collect
this at the same time. Today, both flavors of armv5 kernels (mv and ralink) boot
via uboot which has its own compression scheme for boards that need it.
Note: OLDFILES has not been updated beacuse installkernel will move the whole
directory out of the way before installing the new kernel.
Differential Revision: https://reviews.freebsd.org/D21072
Summary:
It turns out statistics accounting is very expensive in the pmap driver,
and doesn't seem necessary in the common case. Make this optional
behind a MOEA64_STATS #define, which one can set if they really need
statistics.
This saves ~7-8% on buildworld time on a POWER9.
Found by bdragon.
Reviewed by: luporl
Differential Revision: https://reviews.freebsd.org/D20903
o Add an experimental IOMMU support to xDMA framework
The BERI IOMMU device is the part of CHERI device-model project [1]. It
translates memory addresses for various BERI peripherals modelled in
software. It accepts FreeBSD/mips64 page directories format and manages
BERI TLB.
1. https://github.com/CTSRD-CHERI/device-model
Sponsored by: DARPA, AFRL
This patch is the driver for NTB hardware in AMD SoCs (ported from Linux)
and enables the NTB infrastructure like Doorbells, Scratchpads and Memory
window in AMD SoC. This driver has been validated using ntb_transport and
if_ntb driver already available in FreeBSD.
Submitted by: Rajesh Kumar <rajesh1.kumar@amd.com>
MFC after: 1 month
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D18774
The goal of this driver is consolidate information about SuperIO chips
and to provide for peaceful coexistence of drivers that need to access
SuperIO configuration registers.
While SuperIO chips can host various functions most of them are
discoverable and accessible without any knowledge of the SuperIO.
Examples are: keyboard and mouse controllers, UARTs, floppy disk
controllers. SuperIO-s also provide non-standard functions such as
GPIO, watchdog timers and hardware monitoring. Such functions do
require drivers with a knowledge of a specific SuperIO.
At this time the driver supports a number of ITE and Nuvoton (fka
Winbond) SuperIO chips.
There is a single driver for all devices. So, I have not done the usual
split between the hardware driver and the bus functionality. Although,
superio does act as a bus for devices that represent known non-standard
functions of a SuperIO chip. The bus provides enumeration of child
devices based on the hardcoded knowledge of such functions. The
knowledge as extracted from datasheets and other drivers.
As there is a single driver, I have not defined a kobj interface for it.
So, its interface is currently made of simple functions.
I think that we can the flexibility (and complications) when we actually
need it.
I am planning to convert nctgpio and wbwd to superio bus very soon.
Also, I am working on itwd driver (watchdog in ITE SuperIO-s).
Additionally, there is ithwm driver based on the reverted sensors
import, but I am not sure how to integrate it given that we still lack
any sensors interface.
Discussed with: imp, jhb
MFC after: 7 weeks
Differential Revision: https://reviews.freebsd.org/D8175
Unmapped mbufs allow sendfile to carry multiple pages of data in a
single mbuf, without mapping those pages. It is a requirement for
Netflix's in-kernel TLS, and provides a 5-10% CPU savings on heavy web
serving workloads when used by sendfile, due to effectively
compressing socket buffers by an order of magnitude, and hence
reducing cache misses.
For this new external mbuf buffer type (EXT_PGS), the ext_buf pointer
now points to a struct mbuf_ext_pgs structure instead of a data
buffer. This structure contains an array of physical addresses (this
reduces cache misses compared to an earlier version that stored an
array of vm_page_t pointers). It also stores additional fields needed
for in-kernel TLS such as the TLS header and trailer data that are
currently unused. To more easily detect these mbufs, the M_NOMAP flag
is set in m_flags in addition to M_EXT.
Various functions like m_copydata() have been updated to safely access
packet contents (using uiomove_fromphys()), to make things like BPF
safe.
NIC drivers advertise support for unmapped mbufs on transmit via a new
IFCAP_NOMAP capability. This capability can be toggled via the new
'nomap' and '-nomap' ifconfig(8) commands. For NIC drivers that only
transmit packet contents via DMA and use bus_dma, adding the
capability to if_capabilities and if_capenable should be all that is
required.
If a NIC does not support unmapped mbufs, they are converted to a
chain of mapped mbufs (using sf_bufs to provide the mapping) in
ip_output or ip6_output. If an unmapped mbuf requires software
checksums, it is also converted to a chain of mapped mbufs before
computing the checksum.
Submitted by: gallatin (earlier version)
Reviewed by: gallatin, hselasky, rrs
Discussed with: ae, kp (firewalls)
Relnotes: yes
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D20616
The format to use depends on hardware configuration (synthesis-time),
so make it compile-time kernel option.
Extended format allows DMA engine to operate with 64-bit memory addresses.
Sponsored by: DARPA, AFRL
NANDFS has been broken for years. Remove it. The NAND drivers that
remain are for ancient parts that are no longer relevant. They are
polled, have terrible performance and just for ancient arm
hardware. NAND parts have evolved significantly from this early work
and little to none of it would be relevant should someone need to
update to support raw nand. This code has been off by default for
years and has violated the vnode protocol leading to panics since it
was committed.
Numerous posts to arch@ and other locations have found no actual users
for this software.
Relnotes: Yes
No Objection From: arch@
Differential Revision: https://reviews.freebsd.org/D20745
had been done years ago. I did. All this time we've only compiled a LINT
kernel for TARGET_ARCH=arm. Now separate LINT-V5 and LINT-V7 configs are
generated and built.
There are two new files in arm/conf, NOTES.armv5 and NOTES.armv7, containing
some of what used to be in the arm NOTES file. That file now contains only
the bits that are common to v5 and v7.
The makeLINT.mk file now creates the LINT-V5 and LINT-V7 files by concatening
sys/conf/NOTES, arm/conf/NOTES, and arm/conf/NOTES.armv{5,7} in that order.
This adds ACPI device path on devinfo(8) output and
show value of _UPC(usb port capabilities), _PLD (physical location of device)
when hw.usb.debug >= 1 .
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D20630
rename the source to gsb_crc32.c.
This is a prerequisite of unifying kernel zlib instances.
PR: 229763
Submitted by: Yoshihiro Ota <ota at j.email.ne.jp>
Differential Revision: https://reviews.freebsd.org/D20193
The pwm and pwmbus interfaces were nearly identical, this merges them into a
single pwmbus interface. The pwmbus driver now implements the pwmbus
interface by simply passing all calls through to its parent (the hardware
driver). The channel_count method moves from pwm to pwmbus, and the
get_bus method is deleted (just no longer needed).
The net effect is that the interface for doing pwm stuff is now the same
regardless of whether you're a child of pwmbus, or some random driver
elsewhere in the hierarchy that is bypassing the pwmbus layer and is talking
directly to the hardware driver via cross-hierarchy connections established
using fdt data.
The pwmc driver is now a child of pwmbus, instead of being its sibling
(that's why the get_bus method is no longer needed; pwmc now gets the
device_t of the bus using device_get_parent()).
This was lost in r335910 for some reason.
This also fixes a META_MODE rebuild issue in some modules [1].
MFC after: 2 weeks
Reported by: npn [1]
Sponsored by: DellEMC
The A3700 has a different GPIO controller and thus, do not use the old (and
shared) code for Marvell.
The pinctrl driver, also part of the controller, is not supported yet (but
the implementation should be straightforward).
Sponsored by: Rubicon Communications, LLC (Netgate)
The gp register is intended to used by the linker as another means of
performing relaxations, and should point to the small data section (.sdata).
Currently gp is being used as the pcpu pointer within the kernel, but the more
appropriate choice for this is the tp register, which is unused.
Swap existing usage of gp with tp within the kernel, and set up gp properly
at boot with the value of __global_pointer$ for all harts.
Additionally, remove some cases of accessing tp from the PCB, as it is not
part of the per-thread state. The user's tp and gp should be tracked only
through the trapframe.
Reviewed by: markj, jhb
Approved by: markj (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D19893
Apply a linker script when linking i386 kernel modules to apply padding
to a set_pcpu or set_vnet section. The padding value is kind-of random
and is used to catch modules not compiled with the linker-script, so
possibly still having problems leading to kernel panics.
This is needed as the code generated on certain architectures for
non-simple-types, e.g., an array can generate an absolute relocation
on the edge (just outside) the section and thus will not be properly
relocated. Adding the padding to the end of the section will ensure
that even absolute relocations of complex types will be inside the
section, if they are the last object in there and hence relocation will
work properly and avoid panics such as observed with carp.ko or ipsec.ko.
There is a rather lengthy discussion of various options to apply in
the mentioned PRs and their depends/blocks, and the review.
There seems no best solution working across multiple toolchains and
multiple version of them, so I took the liberty of taking one,
as currently our users (and our CI system) are hitting this on
just i386 and we need some solution. I wish we would have a proper
fix rather than another "hack".
Also backout r340009 which manually, temporarily fixed CARP before 12.0-R
"by chance" after a lead-up of various other link-elf.c and related fixes.
PR: 230857,238012
With suggestions from: arichardson (originally last year)
Tested by: lwhsu
Event: Waterloo Hackathon 2019
Reported by: lwhsu, olivier
MFC after: 6 weeks
Differential Revision: https://reviews.freebsd.org/D17512
Add a CAM-Newbus SDIO support module. This works provides a newbus
infrastructure for device drivers wanting to use SDIO. On the lower end
while it is connected by newbus to SDHCI, it talks CAM using the MMCCAM
framework to get to it.
This also duplicates the usbdevs framework to equally create sdiodev
header files with #defines for "vendors" and "products".
Submitted by: kibab (initial work, see https://reviews.freebsd.org/D12467)
Reviewed by: kibab, imp (comments on earlier version)
MFC after: 6 weeks
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19749
After our migration (of certain architectures) to lld the kernel is built
with a unique build-ID. Make it available via a sysctl and uname(1) to
allow the user to identify their running kernel.
Submitted by: Ali Mashtizadeh <ali_mashtizadeh.com>
MFC after: 2 weeks
Relnotes: Yes
Event: Waterloo Hackathon 2019
Differential Revision: https://reviews.freebsd.org/D20326
install -> ${INSTALL}
mtree -> ${MTREE_CMD}
services_mkdb -> ${SERVICES_MKDB_CMD}
cap_mkdb -> ${CAP_MKDB_CMD}
pwd_mkdb -> ${PWD_MKDB_CMD}
kldxref -> ${KLDXREF_CMD}
If you do custom FreeBSD builds you may want to override those
in some cases.
Sponsored by: Sippy Software, Inc.
I introduced an obvious compiler error in r346282, so this change fixes
that.
Unfortunately, RANDOM_LOADABLE isn't covered by our existing tinderbox, and
it seems like there were existing latent linking problems. I believe these
were introduced on accident in r338324 during reduction of the boolean
expression(s) adjacent to randomdev.c and hash.c. It seems the
RANDOM_LOADABLE build breakage has gone unnoticed for nine months.
This change correctly annotates randomdev.c and hash.c with !random_loadable
to match the pre-r338324 logic; and additionally updates the HWRNG drivers
in MD 'files.*', which depend on random_device symbols, with
!random_loadable (it is invalid for the kernel to depend on symbols from a
module).
(The expression for both randomdev.c and hash.c was the same, prior to
r338324: "optional random random_yarrow | random !random_yarrow
!random_loadable". I.e., "random && (yarrow || !loadable)." When Yarrow
was removed ("yarrow := False"), the expression was incorrectly reduced to
"optional random" when it should have retained "random && !loadable".)
Additionally, I discovered that virtio_random was missing a MODULE_DEPEND on
random_device, which breaks kld load/link of the driver on RANDOM_LOADABLE
kernels. Address that issue as well.
PR: 238223
Reported by: Eir Nym <eirnym AT gmail.com>
Reviewed by: delphij, markm
Approved by: secteam(delphij)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D20466
With the reorg r348175, we now look at modified before it is
set. Rearrange things so that we can set include_metadata to either
yes, no or if-modified. This should fix the -R flag that was broken in
r348175, which broke WITH_REPRODUCIBLE_BUILD for kernels.
Feedback From: emaste@
Differential Revision: https://reviews.freebsd.org/D20480
cpufunc, in terms of __builtin_ffs and the like, for arm32 v6 and v7
architectures, and use those, rather than the simple libkern
implementations, in building arm32 kernels.
Reviewed by: manu
Approved by: kib, markj (mentors)
Tested by: iz-rpi03_hs-karlsruhe.de, mikael.urankar_gmail.com, ian
Differential Revision: https://reviews.freebsd.org/D20412
code. The primary client of this is probably going to be ZFS encryption.
Reviewed by: jhb, cem
Sponsored by: iXsystems Inc, Kithrup Enterprises
Differential Revision: https://reviews.freebsd.org/D19298
This takes the SPCR code currently in uart_cpu_arm64.c, moves it into
a new uart_cpu_acpi.c (with some associated refactoring), and uses it
from both arm64 and x86.
An SPCR serial port address AccessWidth field value of 0 ("reserved")
is now treated as 1 ("byte access") in order to work around a buggy
SPCR table on Amazon EC2 i3.metal instances.
Reviewed by: manu, Greg V
MFC after: 3 days
Sponsored by: https://www.patreon.com/cperciva
Differential Revision: https://reviews.freebsd.org/D20357
Add a clock driver for clock that can either be used in integer mode
with one N factor and one M divider or in fractional mode where the
output frequency is chosen between two predifined output.
Add -v to print TYPE REVISION BRANCH RELEASE VERSION RELDATE variables
Add -V var to print var's value
Both of these in ${var}="${val}" format suitable for
eval $(sh newvers.sh -v)
in shell scripts / makefiles.
Add -c to print the copyright / license comment text only.
Document these, and remove soon-to-be obsolete comment.
Minor code motion as well bunded here to put functions after
VARS_ONLY and command line argument parsing.
Differential Revision: https://reviews.freebsd.org/D19849
FDT data is sometimes used to configure usb devices which are hardwired into
an embedded system. Because the devices are instantiated by the usb
enumeration process rather than by ofwbus iterating through the fdt data, it
is somewhat difficult for a usb driver to locate fdt data that belongs to
it. In the past, various ad-hoc methods have been used, which can lead to
errors such applying configuration that should apply only to a hardwired
device onto a similar device attached by the user at runtime. For example,
if the user adds an ethernet device that uses the same driver as the builtin
ethernet, both devices might end up with the same MAC address.
These changes add a new usb_fdt_get_node() helper function that a driver can
use to locate FDT data that belongs to a single unique instance of the
device. This function locates the proper FDT data using the mechanism
detailed in the standard "usb-device.txt" binding document [1].
There is also a new usb_fdt_get_mac_addr() function, used to retrieve the
mac address for a given device instance from the fdt data. It uses
usb_fdt_get_node() to locate the right node in the FDT data, and attempts to
obtain the mac-address or local-mac-address property (in that order, the
same as linux does it).
The existing if_smsc driver is modified to use the new functions, both as an
example and for testing the new functions. Rpi and rpi2 boards use this
driver and provide the mac address via the fdt data.
[1] https://github.com/torvalds/linux/blob/master/Documentation/devicetree/bindings/usb/usb-device.txt
Differential Revision: https://reviews.freebsd.org/D20262
cpufunc, in terms of __builtin_ffs and the like, for arm64
architectures, and use those, rather than the simple libkern
implementations, in building arm64 kernels.
Tested by: greg_unrelenting.technology (earlier version)
Reviewed by: alc
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D20250
The upstream implementation of -z ifunc-noplt disallows its combination
with -z text. The option does not have much significance for kernel
builds, though.
Reviewed by: kib (previous version)
Discussed with: emaste
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20260
Generate the ilinks for all dependency objects not just the ones
in the CLEAN list.
Possibly related to r345351
Reported by: kmoore
MFC after: 2 weeks
X-MFC-with: r345351
Sponsored by: Dell EMC Isilon
Ampere eMAG systems have XHCI just described in ACPI, not on PCI.
Submitted by: Greg V <greg@unrelenting.technology>
Reviewed by: andrew
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D19986
Add support for DIM based on Linux,
with some minor adaptions specific to FreeBSD.
Linux commit
f97c3dc3c0e8d23a5c4357d182afeef4c67f5c33
MFC after: 3 days
Sponsored by: Mellanox Technologies
tun(4) and tap(4) share the same general management interface and have a lot
in common. Bugs exist in tap(4) that have been fixed in tun(4), and
vice-versa. Let's reduce the maintenance requirements by merging them
together and using flags to differentiate between the three interface types
(tun, tap, vmnet).
This fixes a couple of tap(4)/vmnet(4) issues right out of the gate:
- tap devices may no longer be destroyed while they're open [0]
- VIMAGE issues already addressed in tun by kp
[0] emaste had removed an easy-panic-button in r240938 due to devdrn
blocking. A naive glance over this leads me to believe that this isn't quite
complete -- destroy_devl will only block while executing d_* functions, but
doesn't block the device from being destroyed while a process has it open.
The latter is the intent of the condvar in tun, so this is "fixed" (for
certain definitions of the word -- it wasn't really broken in tap, it just
wasn't quite ideal).
ifconfig(8) also grew the ability to map an interface name to a kld, so
that `ifconfig {tun,tap}0` can continue to autoload the correct module, and
`ifconfig vmnet0 create` will now autoload the correct module. This is a
low overhead addition.
(MFC commentary)
This may get MFC'd if many bugs in tun(4)/tap(4) are discovered after this,
and how critical they are. Changes after this are likely easily MFC'd
without taking this merge, but the merge will be easier.
I have no plans to do this MFC as of now.
Reviewed by: bcr (manpages), tuexen (testing, syzkaller/packetdrill)
Input also from: melifaro
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D20044
RISC-V ISA specifies no cache management instructions so leave cache
operations in cpufunc.h as no-op for now.
Note some new hardware comes with their own memory-mapped cache
management controller.
Tested on HiFive Unleashed board with cgem(4).
Reviewed by: markj
Obtained from: arm64
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D20126
Use it wherever COMPAT_FREEBSD11 is currently specified, like r309749.
Reviewed by: imp, jhb, markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D20120
r345519 rewrote parts of how we build .dtb, but mistakenly dropped the
vendor dir for aarch64. Simply drop the :T for building ${DTB} in the
aarch64 case- it'll get applied at install-time as-needed, with :H:T for
determining the vendor dir.
Reported by: manu
Tested by: manu
Reviewed by: manu
MFC after: 3 days
This change makes it easier to enable/disable the inclusion of
OPAL flash in the kernel.
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D20098
r346307 inadvertently started installing FDT_DTS_FILE along with the kernel.
While this isn't necessarily bad, it was not intended or discussed and it
actively breaks some current setups that don't anticipate any .dtb being
installed when it's using static fdt. This change could be reconsidered down
the line, but it needs to be done with prior discussion.
Fix it by pushing FDT_DTS_FILE build down into the raw dtb.build.mk bits.
This technically allows modules building DTS to accidentally specify an
FDT_DTS_FILE that gets built but isn't otherwise useful (since it's not
installed), but I suspect this isn't a big deal and would get caught with
any kind of testing -- and perhaps this might end up useful in some other
way, for example by some module wanting to embed fdt in some other way than
our current/normal mechanism.
Reported by: Mori Hiroki <yamori813@yahoo.co.jp>
MFC after: 3 days
X-MFC-With: r346307
-Wformat-zero-length does not highlight any particularly wrong code and it
is especially meaningless for device_printf(). Turn it off entirely to
remove a source of false positives.
Sponsored by: Dell EMC Isilon
It is a useful arc4random wrapper in the kernel for much the same reasons as
in userspace. Move the source to libkern (because kernel build is
restricted to sys/, but userspace can include any file it likes) and build
kernel and libc versions from the same source file.
Copy the documentation from arc4random_uniform(3) to the section 9 page.
While here, add missing arc4random_buf(9) symlink.
Sponsored by: Dell EMC Isilon
sha1 is used by ether_gen_addr after r346324. Perhaps in an ideal world we
could detect that the kernel's been compiled without sha1_* bits included
and silently fallback to arc4random instead because these platforms/kernel
configs are far and few between. It's fairly lightweight, though, so just
include it for now.
FDT_DTS_FILE was built separately with a rule in sys/conf/files and
recreated the rules we used in dtb.mk. Now that we have other infrastructure
to build a DTB along with the kernel, fold FDT_DTS_FILE into that since it
doesn't have any special requirements.
fdt(4) never got revised to mention the DTS/DTSO make options, so do that
now.
Reviewed by: imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D19736
$() is more modern and also nests. Convert the mix of styles to using
only the former (although the latter was more common). It's the more
dominant style in other shell scripts these days as well.
Differential Revision: https://reviews.freebsd.org/D19840
All variable assignments that start in column 1 have to be on a single
line for amd to build due to as weird dependency there (most likely it
can be fixed to use the new VARS_ONLY feature, but it isn't
today). usr.sbin/amd/include/Makefile calls
usr.sbin/amd/include/newvers.sh which does:
eval `LC_ALL=C egrep '^[A-Z]+=' $1 | grep -v COPYRIGHT`
which is where that requirement comes from. It handles COPYRIGHT since
that's an exception. Rather than add additional exceptions, cope with
the long line in newvers.sh instead. Note: it no longer needs to
filter COPYRIGHT because the assignment doesn't start in column 1
anymore.
I had done a universe when I had an earlier version of r346018 that
had it as one line. When I changed it to multi-line as suggested in
the review, I only built kernels on a couple of architectures to make
sure it didn't break anything.
Add comment to newvers.sh noting this.
Obviously, this unbreaks the amd build.
Remove the phrase from boilerplate copyright we stick on vers.c when
we can't find the template file. In practice, this won't change a
thing, except for the case of compiling the kernel standalone w/o the
rest of a tree on a system that doesn't have
/usr/share/examples/etc/bsd-copyright installed.
The current approach of injecting manifest into mac_veriexec is to
verify the integrity of it in userspace (veriexec (8)) and pass its
entries into kernel using a char device (/dev/veriexec).
This requires verifying root partition integrity in loader,
for example by using memory disk and checking its hash.
Otherwise if rootfs is compromised an attacker could inject their own data.
This patch introduces an option to parse manifest in kernel based on envs.
The loader sets manifest path and digest.
EVENTHANDLER is used to launch the module right after the rootfs is mounted.
It has to be done this way, since one might want to verify integrity of the init file.
This means that manifest is required to be present on the root partition.
Note that the envs have to be set right before boot to make sure that no one can spoof them.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Reviewed by: sjg
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D19281
Before this I suppose it was impossible load CAM-based NVMe as module.
Plus this appeared to be needed to build r345815 without NVMe driver.
MFC after: 2 weeks
Summary:
kexec-lite cannot currently handle multiple PT_LOAD segments. In some
cases the compiler generates multiple PT_LOAD segments for an unknown
reason, causing boot to fail from kexec-lite.
Submitted by: Brandon Bergren (older version)
Differential Revision: https://reviews.freebsd.org/D19574
We were doing so as a workaround for the problem addressed by r345593, so
it's no longer necessary.
Reviewed by: jhb
Discussed with: emaste
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19705
This allows for directives such as
makeoptions DTS+=/out/of/tree/myboard.dts
# in tree! Same rules applied as if this were in a dtb/ module
makeoptions DTS+=otherboard.dts
to be specified in config(5) and have these built/installed alongside th
kernel. The assumption that overlays live in an overlays/ directory is only
made for in-tree DTSO, but we still make the assumption that out-of-tree
arm64 DTS will be in vendored directories (for now).
This lowers the cost to hacking on an overlay or dts by being able to
quickly throw it in a custom config, especially if it doesn't fit one of the
current dtb/modules quite appropriately or it's not intended for commit
there.
The build/install targets were split out of dtb.mk to centralize the build
logic and leave out the all/realinstall/CLEANFILES additions... it was
believed that we didn't want to pollute the kernel build with these.
The build rules were converted to suffix rules at the suggestion of Ian to
clean things up a little bit in a world where we can have mixed
in-tree/out-of-tree DTS/DTSO specified.
Reviewed by: ian
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D19351
TMPFS_PAGES_MINRESERVED controls how much memory is reserved for the system
and not used by tmpfs.
On very small memory systems, the default value may be too high and this
prevents these small memory systems from using reroot, which is required
for them to install firmware updates.
Submitted by: Hiroki Mori <yamori813@yahoo.co.jp>
Reviewed by: mizhka
Differential Revision: https://reviews.freebsd.org/D13583
While geom_flashmap has always supported label names for its slices, it does
so by appending "s.labelname" to the provider device name, meaning you still
have to know the name and unit of the hardware device to use the labels.
These changes add support for device-independent geom_flashmap labels, using
the standard geom_label infrastructure. geom_flashmap now creates a softc
struct attached to its geom, and as it creates slices it stores the label
into an array in the softc. The new geom_label_flashmap uses those labels
when tasting a geom_flashmap provider.
Differential Revision: https://reviews.freebsd.org/D19535
TPM has a built-in RNG, with its own entropy source.
The driver was extended to harvest 16 random bytes from TPM every 10 seconds.
A new build option "TPM_HARVEST" was introduced - for now, however, it
is not enabled by default in the GENERIC config.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Reviewed by: markm, delphij
Approved by: secteam
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D19620
Attempting to build www/firefox on POWER9 resulted in a HMI exception being
thrown, a fatal trap currently. This is typically caused by timer facility
errors, but examination of the Hypervisor Maintenance Exception Register
(HMER) yielded only that an exception had recovered, with no information of
the actual exception cause.
When an HMI occurs, OPAL_HANDLE_HMI or OPAL_HANDLE_HMI2 must be called to
handle the exception at the firmware level. If the exception is handled, we
can continue.
This adds only the preliminary handler, enough to prevent package building
from panicking. An enhancement in the future is to use the flags returned
by OPAL_HANDLE_HMI2 to print more useful error messages, and log maintenance
events.
Reviewed by: luporl
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D19634
r345402 fixed the bug that led to the split of the ISA 3.0 HPT handling from
the existing manager. The cause of the bug was gcc moving the register
holding VPN to a different register (not r0), which triggered bizarre
behaviors. With the fix, things work, so they can be re-merged. No
performance lost with the merge.
This ensures files like genassym.o and awk/mfiles are generated before
descending into the modules build. It may also allow some module builds
to not recreate files that are already present in the KERNBUILDDIR.
This fixes a rare build race where genassym.o is missing and assym.inc
is empty.
More work is planned around this to reduce some redundant dependency
generation in modules.
PR: 233339
MFC after: 2 weeks
Reported by: markj
This makes it more consistent with other filesystems, which all end in "fs",
and more consistent with its mount helper, which is already named
"mount_fusefs".
Reviewed by: cem, rgrimes
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19649
The kernel build uses symlinks to make MD #includes like <machine/pcpu.h>
work. Debug info ends up referencing these symlinks in a relative path,
so debuggers generally don't know how to find the corresponding headers.
Address this by using -fdebug-prefix-map to map relative paths through
the symlinks to their absolute paths in the source tree. This is
consistent with how regular source file paths are defined in the
kernel's debug info.
Also map the current directory to an absolute path to the object
directory. This gives debuggers a chance to find auto-generated files
like vnode_if.c if the object directory is available.
Reviewed by: emaste, jhb (previous version)
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19633
Update NAT64LSN implementation:
o most of data structures and relations were modified to be able support
large number of translation states. Now each supported protocol can
use full ports range. Ports groups now are belongs to IPv4 alias
addresses, not hosts. Each ports group can keep several states chunks.
This is controlled with new `states_chunks` config option. States
chunks allow to have several translation states for single alias address
and port, but for different destination addresses.
o by default all hash tables now use jenkins hash.
o ConcurrencyKit and epoch(9) is used to make NAT64LSN lockless on fast path.
o one NAT64LSN instance now can be used to handle several IPv6 prefixes,
special prefix "::" value should be used for this purpose when instance
is created.
o due to modified internal data structures relations, the socket opcode
that does states listing was changed.
Obtained from: Yandex LLC
MFC after: 1 month
Sponsored by: Yandex LLC
o most of data structures and relations were modified to be able support
large number of translation states. Now each supported protocol can
use full ports range. Ports groups now are belongs to IPv4 alias
addresses, not hosts. Each ports group can keep several states chunks.
This is controlled with new `states_chunks` config option. States
chunks allow to have several translation states for single alias address
and port, but for different destination addresses.
o by default all hash tables now use jenkins hash.
o ConcurrencyKit and epoch(9) is used to make NAT64LSN lockless on fast path.
o one NAT64LSN instance now can be used to handle several IPv6 prefixes,
special prefix "::" value should be used for this purpose when instance
is created.
o due to modified internal data structures relations, the socket opcode
that does states listing was changed.
Obtained from: Yandex LLC
MFC after: 1 month
Sponsored by: Yandex LLC
CLAT is customer-side translator that algorithmically translates 1:1
private IPv4 addresses to global IPv6 addresses, and vice versa.
It is implemented as part of ipfw_nat64 kernel module. When module
is loaded or compiled into the kernel, it registers "nat64clat" external
action. External action named instance can be created using `create`
command and then used in ipfw rules. The create command accepts two
IPv6 prefixes `plat_prefix` and `clat_prefix`. If plat_prefix is ommitted,
IPv6 NAT64 Well-Known prefix 64:ff9b::/96 will be used.
# ipfw nat64clat CLAT create clat_prefix SRC_PFX plat_prefix DST_PFX
# ipfw add nat64clat CLAT ip4 from IPv4_PFX to any out
# ipfw add nat64clat CLAT ip6 from DST_PFX to SRC_PFX in
Obtained from: Yandex LLC
Submitted by: Boris N. Lytochkin
MFC after: 1 month
Relnotes: yes
Sponsored by: Yandex LLC
Firmware needed by petitboot, for example, GPU firmware, can be installed to
a partition in the flash filesystem. This driver exposes the full flash
given by the device tree, letting the user manage firmware, etc, from
FreeBSD.
To use the partitions provided by the flash module, the fdt_slicer module is
needed, but the module isn't needed for raw access, so there's no direct
dependency link in here.
MFC after: 2 weeks
The OPAL firmware only supports a finite number of in-flight asynchronous
operations. Rather than have each subsystem try to manage its own, use a
central management service to hand out tokens.
More work can be done to improve asynchronous behavior, such as funneling
things through a future OPAL heartbeat handler, but capabilities will be
added as needed.
Augment the existing consumers (i2c and sensors) to use this new API.
MFC after: 4 weeks
Marvell XHCI is in fact generic-xhci, so move the driver and
add the compatible string.
While here, get and enable the phy if the dtb provide one.
The xhci bindings state that phys should be in a 'phys' property but
Marvell DTS uses 'usb-phy', only add support for 'usb-phy' for now.
Sponsored-by: Rubicon Communications, LCC ("Netgate")
This is a "fake" phy that handle regulator, clocks and reset gpio.
Only clock and regulator is supported for now.
Sponsored-by: Rubicon Communications, LCC ("Netgate")
Embedded lzma decompression library becomes a module usable by other
consumers, in addition to geom_uzip.
Most important code changes are
- removal of XZ_DEC_SINGLE define, we need the code to work
with XZ_DEC_DYNALLOC;
- xz_crc32_init() call is removed from geom_uzip, xz module handles
initialization on its own.
xz is no longer embedded into geom_uzip, instead the depend line for
the module is provided, and corresponding kernel option is added to
each MIPS kernel config file using geom_uzip.
The commit also carries unrelated cleanup by removing excess "device geom_uzip"
in places which were missed in r344479.
Reviewed by: cem, hselasky, ray, slavash (previous versions)
Sponsored by: Mellanox Technologies
Differential revision: https://reviews.freebsd.org/D19266
MFC after: 3 weeks
add gcov support and export results as files in debugfs
Reviewed by: hps@
MFC after: 1 week
Sponsored by: iX Systems
Differential Revision: https://reviews.freebsd.org/D19260
this one should also work on amd64 and sparc64.
LINT was broken in r312910 with the removal of pc98 support, by changing
the pathname in UKBD_DFLT_KEYBAP from a removed pc98 file to a nonexistent
file.
There are many bugs nearby. Some are:
- the error is not properly detected and handled by make(1), because
kbdcontrol(8) exits with status 0 after failing to find the keymap file
- UKBD_DFLT_KEYBAP is supposed to be MI, and is in MI NOTES to try enforce
this, but 5 out of 8 arches don't support it
- LINT seems to have been broken by this in only 7 out of 8 arches. mips
breaks test coverage instead, by killing this option in its MD NOTES.
arm kills ukbd but that is not enough to configure an unsupported option
used only by ukbd.
Add or fix options to control static and dynamic configuration. Keep
the default of scteken, but default to statically configuring all available
emulators (now 3 instead of 1).
The dumb emulator is almost usable. libedit and libreadline handle
dumb terminals perfectly for at least shell history. less(1) works
as well as possible except on exit. But curses programs make messes.
The dumb emulator has strange color support, with 2 dumb colors for
normal output but fancy colorization for the cursor, mouse pointer and
(with a non-dumb initial emulator) for low-level console output.
Using the sc emulator instead of the default of scteken fixes at least
the following bugs:
- NUL is a printing character in cons25 but not in teken
- teken doesn't support fixed colors for "reverse" video.
- The best versions of sc are about 10 times faster than scteken (for
printing to the frame buffer). This version is only about 5 times
faster.
Fix configuration features:
- make SC_DFLT_TERM (for setting the initial emulator) a normal option.
Add configuration features:
- negative options SC_NO_TERM_* for omitting emulators in the static config.
Modules for emulators might work, but I don't know of any
- vidcontrol -e shows the available emulators
- vidcontrol -E <emulator> sets the active emulator.
is easier to configure. It is MI, unlike some of the other syscons files
already in the MI list.
Move scvtb.c similarly. It is needed whenever sc is configured, and is
more MI than most of the files already in the MI list.
This only changes the combined list for arm64 and mips. These arches
already cannot build sc or even NOTES.
The data structure implements non-intersecting intervals over the [0,
UINT64_MAX] range, and supports fast insert, predicated clearing of
subrange, and lookup of an interval containing the specified address.
Internally it is a pctrie over the interval start addresses.
Implementation provides additional guarantees over the structure state
in case of memory allocation failures.
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D18893
Per discussions on arch@ and elsewhere, the maintenance of this code
has moved to the drm-kmod and drm-legacy-kmod ports. Remove the i915
and radeon drivers from the tree.
Approved by: graphics team
Reviewed by: manu@, mmel@
Differential Revision: https://reviews.freebsd.org/D19196
Remove support for compiling drm2 as a module. This has transitioned
to the drm-kmod or drm-legacy-kmodw ports.
Approved by: graphics team
Reviewed by: manu@, mmel@
Differential Revision: https://reviews.freebsd.org/D19196
Retire the drm modules / drivers. These are now handled by the
drm-legacy-kmod port and/or the drm-kmod port. All future
development and maintanace will be handled there.
Approved by: graphics team
Reviewed by: manu@, mmel@
Differential Revision: https://reviews.freebsd.org/D19196
Ensure __bss_start is associated with the next section
in case orphan sections are placed directly after .sdata,
as has been seen to happen with LLD.
Submitted by: "J.R.T. Clarke" <jrtc4@cam.ac.uk>
Differential Revision: https://reviews.freebsd.org/D18429
This adds the CBC-MAC code to the kernel, but does not hook it up to
anything (that comes in the next commit).
https://tools.ietf.org/html/rfc3610 describes the algorithm.
Note that this is a software-only implementation, which means it is
fairly slow.
Sponsored by: iXsystems Inc
Differential Revision: https://reviews.freebsd.org/D18592
Without this fix, the usage of kernel coverage would lockup the system.
Thanks to Andrew for suggesting the final form of the fix.
PR: 235611
Reviewed by: andrew@, emaste@
Differential Revision: https://reviews.freebsd.org/D19135
Make every rockchip file depend on the multiple soc_rockchip options
While here make rk_i2c and rk_gpio depend on their device options.
Reported by: sbruno
Add new file arm64/acpica/acpi_iort.c to support the "IO Remapping
Table" (IORT). The table is specified in ARM document "ARM DEN 0049D"
titled "IO Remapping Table Platform Design Document". The IORT table
has information on the associations between PCI root complexes, SMMU
blocks and GIC ITS blocks in the system.
The changes are to parse and save the information in the IORT table.
The API to use this information is added to sys/dev/acpica/acpivar.h.
The acpi_iort.c also has code to check the GIC ITS nodes seen in the
IORT table with corresponding entries in MADT table (for validity)
and with entries in SRAT table (for proximity information).
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D18002
The XIVE (External Interrupt Virtualization Engine) is a new interrupt
controller present in IBM's POWER9 processor. It's a very powerful,
very complex device using queues and shared memory to improve interrupt
dispatch performance in a virtualized environment.
This yields a ~10% performance improvment over the XICS emulation mode,
measured in both buildworld, and 'dd' from nvme to /dev/null.
Currently, this only supports native access.
MFC after: 1 month
iflib is already a module, but it is unconditionally compiled into the
kernel. There are drivers which do not need iflib(4), and there are
situations where somebody might not want iflib in kernel because of
using the corresponding driver as module.
Reviewed by: marius
Discussed with: erj
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D19041
Effectively all i386 kernels now have two pmaps compiled in: one
managing PAE pagetables, and another non-PAE. The implementation is
selected at cold time depending on the CPU features. The vm_paddr_t is
always 64bit now. As result, nx bit can be used on all capable CPUs.
Option PAE only affects the bus_addr_t: it is still 32bit for non-PAE
configs, for drivers compatibility. Kernel layout, esp. max kernel
address, low memory PDEs and max user address (same as trampoline
start) are now same for PAE and for non-PAE regardless of the type of
page tables used.
Non-PAE kernel (when using PAE pagetables) can handle physical memory
up to 24G now, larger memory requires re-tuning the KVA consumers and
instead the code caps the maximum at 24G. Unfortunately, a lot of
drivers do not use busdma(9) properly so by default even 4G barrier is
not easy. There are two tunables added: hw.above4g_allow and
hw.above24g_allow, the first one is kept enabled for now to evaluate
the status on HEAD, second is only for dev use.
i386 now creates three freelists if there is any memory above 4G, to
allow proper bounce pages allocation. Also, VM_KMEM_SIZE_SCALE changed
from 3 to 1.
The PAE_TABLES kernel config option is retired.
In collaboarion with: pho
Discussed with: emaste
Reviewed by: markj
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D18894
This will allow multiple consumers of the coverage data to be compiled
into the kernel together. The only requirement is only one can be
registered at a given point in time, however it is expected they will
only register when the coverage data is needed.
A new kernel conflig option COVERAGE is added. This will allow kcov to
become a module that can be loaded as needed, or compiled into the
kernel.
While here clean up the #include style a little.
Reviewed by: kib
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D18955
o In vm_pager_bufferinit() create pbuf_zone and start accounting on how many
pbufs are we going to have set.
In various subsystems that are going to utilize pbufs create private zones
via call to pbuf_zsecond_create(). The latter calls uma_zsecond_create(),
and sets a limit on created zone. After startup preallocate pbufs according
to requirements of all pbuf zones.
Subsystems that used to have a private limit with old allocator now have
private pbuf zones: md(4), fusefs, NFS client, smbfs, VFS cluster, FFS,
swap, vnode pager.
The following subsystems use shared pbuf zone: cam(4), nvme(4), physio(9),
aio(4). They should have their private limits, but changing that is out of
scope of this commit.
o Fetch tunable value of kern.nswbuf from init_param2() and while here move
NSWBUF_MIN to opt_param.h and eliminate opt_swap.h, that was holding only
this option.
Default values aren't touched by this commit, but they probably should be
reviewed wrt to modern hardware.
This change removes a tight bottleneck from sendfile(2) operation, that
uses pbufs in vnode pager. Other pagers also would benefit from faster
allocation.
Together with: gallatin
Tested by: pho
When building with KCOV enabled the compiler will insert function calls
to probes allowing us to trace the execution of the kernel from userspace.
These probes are on function entry (trace-pc) and on comparison operations
(trace-cmp).
Userspace can enable the use of these probes on a single kernel thread with
an ioctl interface. It can allocate space for the probe with KIOSETBUFSIZE,
then mmap the allocated buffer and enable tracing with KIOENABLE, with the
trace mode being passed in as the int argument. When complete KIODISABLE
is used to disable tracing.
The first item in the buffer is the number of trace event that have
happened. Userspace can write 0 to this to reset the tracing, and is
expected to do so on first use.
The format of the buffer depends on the trace mode. When in PC tracing just
the return address of the probe is stored. Under comparison tracing the
comparison type, the two arguments, and the return address are traced. The
former method uses on entry per trace event, while the later uses 4. As
such they are incompatible so only a single mode may be enabled.
KCOV is expected to help fuzzing the kernel, and while in development has
already found a number of issues. It is required for the syzkaller system
call fuzzer [1]. Other kernel fuzzers could also make use of it, either
with the current interface, or by extending it with new modes.
A man page is currently being worked on and is expected to be committed
soon, however having the code in the kernel now is useful for other
developers to use.
[1] https://github.com/google/syzkaller
Submitted by: Mitchell Horne <mhorne063@gmail.com> (Earlier version)
Reviewed by: kib
Testing by: tuexen
Sponsored by: DARPA, AFRL
Sponsored by: The FreeBSD Foundation (Mitchell Horne)
Differential Revision: https://reviews.freebsd.org/D14599
newvers.sh takes upwards of 4-5 seconds to complete on trees checked
out from github, due to searching the entire history for non-existent
git-svn metadata. Similarly, if one does not check out notes, we
again search the entire history for notes. That makes newvers.sh very
slow for many github users.
To fix this in a fair way, limit the history search to the last 10K
commits: if you're more than 10K commits out of sync, then you've
forked the project, and our SVN rev is no longer very important to you.
Due to how git implements --grep in conjunction with -n, --grep has been
removed for performance reasons (git does not seem to limit its search
to the -n limit in this case, and takes just as long as it did with no
limit).
Reviewed by: emaste, imp
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D18745
Perforce no longer offers a FreeBSD client and it not a viable VCS for
FreeBSD development. Remove p4 version logic to simplify newvers.sh in
advance of other changes.
Sponsored by: The FreeBSD Foundation
Consider the case where FreeBSD is checked out via Subversion with a
(perhaps unrelated) .git or .hg directory at a higher level - for
example,
.../.git
.../src/freebsd
Previously newvers obtained the SVN revision information via svnversion,
and then tried to obtain the SVN revision corresponding to the git or hg
commit, overwriting the existing information.
As a short term fix use a different variable for hg-svn or git-svn
information, setting $svn from hg or git info only if not empty.
Reported by: Matthias Apitz
Sponsored by: The FreeBSD Foundation
This merge brings in a couple new files, which needed to be attached to the
build; a new dependency on <limits.h>, which must be stubbed; and a name
change in the Context parameter constants, from ZSTD_p_foo to ZSTD_c_foo.
Significantly, it fixes a kernel build error with GCC where floating-point
functions were included in the kernel build, by hiding them under the same
compile-time #ifdef that already covered their invocation. That issue was
introduced to FreeBSD in the 1.3.7 update and tracked upstream here:
https://github.com/facebook/zstd/issues/1386
The full 1.3.8 release notes can be found on Github:
https://github.com/facebook/zstd/releases/tag/v1.3.8
Relnotes: yes
This fixes a warning seen when compiling amd64 GENERIC with clang 7.
Also remove the workaround added in r337324. clang 7 and gcc 4.2
generate the same code with or without the code change.
Reviewed by: imp (previous version)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D18603
It was written basing on:
TCG PC Client Platform TPM Profile (PTP) Specification Version 22, Revision 1.03.
It only supports Locality 0. Interrupts are only supported in FIFO mode.
The driver in FIFO mode was tested on x86 with Infineon SLB9665 discrete TPM chip.
Driver in both modes was also tested on qemu with swtpm running on host.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D18048
icu is a interrupt concentrator in the CP110 block and gicp
is a gic extension to allow interrupts in the CP block to be turned
into GIC SPI interrupts
Sponsored by: Rubicon Communications, LLC ("Netgate")
The cp110 clock controller controls the clocks and gate of the CP110
hardware block.
Every clock/gate are implemented except the NAND clock.
Sponsored by: Rubicon Communications, LLC ("Netgate")
The first two clocks are for the clusters and their frequencies can be
found reading a register. Then a fixed 1200Mhz clock is present and two
fixed clocks, 'mss' which is 1200 / 6 and 'sdio' which is 1200 / 3.
Sponsored by: Rubicon Communications, LLC ("Netgate")
The pwm subsystem consist of API for PWM controllers, pwmbus to register them
and a pwm(8) utility to talk to them from userland.
Reviewed by: oshgobo (capsicum), bcr (manpage), 0mp (manpage)
Differential Revision: https://reviews.freebsd.org/D17938
ACPI SRAT table on arm64 uses GICC entries to provide CPU locality
information. These entries use an AcpiProcessorUid to identify the
CPU (unlike on x86 where the entries have an APIC ID).
Update acpi_pxm.c to extend the cpu_add/cpu_find/cpu_get_info
functions to handle AcpiProcessorUid. Use the updated functions
while parsing ACPI_SRAT_GICC_AFFINITY entry for arm64.
Also update sys/conf/files.arm64 to build acpi_pxm.c when ACPI is
enabled.
Reviewed by: markj (previous version)
Differential Revision: https://reviews.freebsd.org/D17942
This moves the architecture independent parts of sys/x86/acpica/srat.c
to sys/dev/acpica/acpi_pxm.c, to be used later on arm64. The function
declarations are moved to sys/dev/acpica/acpivar.h
We also need to update sys/conf/files.{i386,amd64} to use the new file.
No functional changes.
Reviewed by: markj, imp
Differential Revision: https://reviews.freebsd.org/D17941
Changelist:
- Replace netmap passthrough host support with a more general
mechanism to call TXSYNC/RXSYNC from an in-kernel event-loop.
No kernel threads are used to use this feature: the application
is required to spawn a thread (or a process) and issue a
SYNC_KLOOP_START (NIOCCTRL) command in the thread body. The
kernel loop is executed by the ioctl implementation, which returns
to userspace only when a different thread calls SYNC_KLOOP_STOP
or the netmap file descriptor is closed.
- Update the if_ptnet driver to cope with the new data structures,
and prune all the obsolete ptnetmap code.
- Add support for "null" netmap ports, useful to allocate netmap_if,
netmap_ring and netmap buffers to be used by specialized applications
(e.g. hypervisors). TXSYNC/RXSYNC on these ports have no effect.
- Various fixes and code refactoring.
Sponsored by: Sunny Valley Networks
Differential Revision: https://reviews.freebsd.org/D18015
newvers.sh runs mkfifo which did not exist before this change.
However, I didn't notice before because it is run from a function
where a missing command does cause a noticeable failure.
Reviewed By: emaste, markj
Differential Revision: https://reviews.freebsd.org/D18377
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18214
- Store the clip table in 'struct adapter' instead of in the TOM softc.
- Init the clip table during attach and teardown during detach.
- While here, add a dev.<nexus>.<unit>.misc.clip sysctl to dump the
CLIP table.
This does mean that we update the clip table even if TOE is not enabled,
but non-TOE things need the CLIP table anyway.
Reviewed by: np, Krishnamraju Eraparaju @ Chelsio
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D18010
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18142
HW needs to know which UDP packets should be treated as tunnel
encapsulation to do inner packet recognition, classification and
offloads.
Submitted by: Ivan Malov <ivan.malov at oktetlabs.ru>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18134
When reproducible build mode is enabled vers.c may be unchanged between
successive builds. In this case avoid changing the file's metadata so
that it does not cause dependent targets to be rebuilt.
Sponsored by: The FreeBSD Foundation
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D17892
This allows us to build the ubsan code added in r340189 into the kernel
with the KUBSAN option. This will report when undefined behaviour is
detected in the currently running kernel.
As it can be large, the kernel is 65MB on arm64, loader may not be able to
load the kernel on all architectures so is disabled by default for now.
Sponsored by: DARPA, AFRL
Assuming that any output from `git diff-index --name-only` implies
changes in the working tree results in false positives: files with
metadata, but not content, changes are also listed.
Check that content differences exist before adding the -dirty tag to
the git hash.
PR: 229230
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D15968
CLANG_NO_IAS34 was introduced in r276696 to allow then-HEAD kernels to
be built with clang 3.4 in FreeBSD 10. As FreeBSD 11 and later includes
a version of Clang with a sufficiently capable integrated assembler we
do not need the workaround any longer.
Sponsored by: The FreeBSD Foundation
On some Intel devices BIOS does not properly reserve memory (called
"stolen memory") for the GPU. If the stolen memory is claimed by the
OS, functions that depend on stolen memory (like frame buffer
compression) can't be used.
A function called pci_early_quirks that is called before the virtual
memory system is started was added. In Linux, this PCI early quirks
function iterates through all PCI slots to check for any device that
require quirks. While this more generic solution is preferable I only
ported the Intel graphics specific parts because I think my
implementation would be too similar to Linux GPL'd solution after
looking at the Linux code too much.
The code regarding Intel graphics stolen memory was ported from
Linux. In the case of Intel graphics stolen memory this
pci_early_quirks will read the stolen memory base and size from north
bridge registers. The values are stored in global variables that is
later read by linuxkpi_gplv2. Linuxkpi stores these values in a
Linux-specific structure that is read by the drm driver.
Relevant linuxkpi code is here:
https://github.com/FreeBSDDesktop/kms-drm/blob/drm-v4.16/linuxkpi/gplv2/src/linux_compat.c#L37
For now, only amd64 arch is suppor ted since that is the only arch
supported by the new drm drivers. I was told that Intel GPUs are
always located on 0:2:0 so these values are hard coded for now.
Note that the structure and early execution of the detection code is
not required in its current form, but we expect that the code will be
added shortly which fixes the potential BIOS bugs by reserving the
stolen range in phys_avail[]. This must be done as early as possible
to avoid conflicts with the potential usage of the memory in kernel.
Submitted by: Johannes Lundberg <johalun0@gmail.com>
Reviewed by: bwidawsk, imp
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D16719
Differential revision: https://reviews.freebsd.org/D17775
In the last decade(s) we have seen both short term or long term projects
committed to the tree which were considered or even marked "experimental".
While out-of-tree development has become easier than it used to be in
CVS times, there still is a need to have the code shipping with HEAD but
not enabled by default.
While people may think about VIMAGE as one of the recent larger, long term
projects, early protocol implementations (before they are standardised)
are others. (Free)BSD historically was one of the operating systems
which would have running code at early stages and help develop and
influence standardisation and the industry.
Give developers an opportunity to be more pro-active for early adoption
or running large scale code changes stumbling over each others but not
the user's feet. I have not added the option to NOTES in order to avoid
breaking supported option builds, which require constant compile testing.
Discussed with: people in the corridor
Add support for "local" modules. By default, these modules are
located in LOCALBASE/sys/modules (where LOCALBASE defaults to
/usr/local). Individual modules can be built along with a kernel by
defining LOCAL_MODULES to the list of modules. Each is assumed to be
a subdirectory containing a valid Makefile. If LOCAL_MODULES is not
specified, all of the modules present in LOCALBASE/sys/modules are
built and installed along with the kernel.
This means that a port that installs a kernel module can choose to
install its source along with a suitable Makefile to
/usr/local/sys/modules/<foo>. Future kernel builds will then include
that kernel module using the kernel configuration's opt_*.h headers
and install it into /boot/kernel along with other kernel-specific
modules.
This is not trying to solve the issue of folks running GENERIC release
kernels, but is instead aimed at folks who build their own kernels.
For those folks this ensures that kernel modules from ports will
always be using the right KBI, etc. This includes folks running any
KBI-breaking kernel configs (such as PAE).
There are still some kinks to be worked out with cross-building (we
probably shouldn't include local modules in cross-built kernels by
default), but this is a sufficient starting point.
Reviewed by: imp
MFC after: 3 months
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D16966
This driver was marked as gone in 12. We're at 13 now. Remove it.
Data from nycbug's dmesg cache shows only one potential user,
suggesting it never was used much. However, even though this device
has been obsolete for 15 years at least, sys/joystick.h is included in
a number of graphics packages still, so that remains. A full exprun
is needed before that can be removed.
RelNotes: yes
Differential Revision: https://reviews.freebsd.org/D17629
I held the mistaken belief this was completely unused. While the
driver is unused and likely not relevant for a long time,
sys/joystick.h lives on in maybe half a dozen ports, even though
hardware to use it hasn't been widely used in maybe 15 years.
Changelist:
- Move large parts of VALE code to a new file and header netmap_bdg.[ch].
This is useful to reuse the code within upcoming projects.
- Improvements and bug fixes to pipes and monitors.
- Introduce nm_os_onattach(), nm_os_onenter() and nm_os_onexit() to
handle differences between FreeBSD and Linux.
- Introduce some new helper functions to handle more host rings and fake
rings (netmap_all_rings(), netmap_real_rings(), ...)
- Added new sysctl to enable/disable hw checksum in emulated netmap mode.
- nm_inject: add support for NS_MOREFRAG
Approved by: gnn (mentor)
Differential Revision: https://reviews.freebsd.org/D17364
This driver has been obsolete since the FreeBSD 4.x. It should have
been removed then since the sym(4) driver had subsumed it. The driver
was commented out of GENERIC in 2000.
RelNotes: Yes
stg(4) is marked as gone in 12. Remove it. There are no sightings of
it in the nycbug dmesg database. It was for an obscure SCSI card that
sold mostly in Japan, and was especially popilar among pc98 hackers in
the 4.x time frame. It was also only enabled on i386.
Relnote: Yes
nsp(4) is marked as gone in 12. Remove it. There are no sightings of
it in the nycbug dmesg database. It was for an obscure SCSI card that
sold mostly in Japan, and was especially popilar among pc98 hackers in
the 4.x time frame. It was also only enabled on i386.
Relnote: Yes
ncv(4) is marked as gone in 12. Remove it. There are no sightings of
it in the nycbug dmesg database. It was for an obscure SCSI card that
sold mostly in Japan, and was especially popilar among pc98 hackers in
the 4.x time frame..
Relnote: Yes
The buslogic scsi driver has been tagged as gone in 12 for some time
now. Remove it. The nycbug dmesg database shows only one sighting in 6
for this driver. It was very popular in the early days of the project,
but that popularity seems to have died by 2004 when the nycbug
database started up.
Relnotes: yes
Remove the advanssy drivers (both adv and adw). They were tagged as
gone in 12 a while qgo. The nycbug dmesg database shows this was last
seen in 6 and there were only a few adv sightings then (none for adw).
Relnotes: yes
aic was marked to be gone in 12 a while ago. Go ahead and remove it.
nycbug's dmesg database shows this was last seen in 6 and one more
time in 4.x. It never was popular, and what popularity it had was over
before the nycbug databse got going in 2004.
Relnotes: yes
We tagged aha as gone in 12 a while ago. Proceed with its removal.
Data from nycbug's database shows the last sighting of this driver in
6, with the prior one in 4.x show its popularity had died prior to
4.x.
Relnotes: yes
Remove mse and all support for bus and inport devices from the tree.
Data from nycbug's dmesg database shows the last sighting of this
driver was in 4.10 on only one machine.
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D17628
This driver was marked as gone in 12. We're at 13 now. Remove it.
Data from nycbug's dmesg cache shows only one potential user,
suggesting it never was used much.
RelNotes: yes
Differential Revision: https://reviews.freebsd.org/D17629
to switch the output method in run-time. Also document some sysctl
variables that can by changed for NAT64 module.
NAT64 had compile time option IPFIREWALL_NAT64_DIRECT_OUTPUT to use
if_output directly from nat64 module. By default is used netisr based
output method. Now both methods can be used, but they require different
handling by rules.
Obtained from: Yandex LLC
MFC after: 3 weeks
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D16647
This allows the memory mapped I/O virtio driver to attach when we boot
with ACPI tables, for example in some cases with QEMU emulating arm64.
MFC after: 1 month
We no longer build the drm/drm2 modules by default. See UPDATING for
which package to install instead. drm and drm2 have been completely
unsupported abandonware for a long time now. Please report issues with
the pkg modules to x11@freebsd.org.
Approved by: FreeBSD Graphics Team
cycle.
This is expected to be the final ALPHA build of this release
cycle, prior to branching stable/12.
Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation
Rename functions and variables from ixlv to iavf to match the
user-facing name change. There shouldn't be any functional changes
with this change, but this may help with browsing the source code
and reducing diffs in the future.
Submitted by: kbowling@
Reviewed by: erj@, sbruno@
Approved by: re (gjb@)
Differential Revision: https://reviews.freebsd.org/D17544
Finishes the conversion of the 40Gb Intel Ethernet drivers to iflib(9) for
FreeBSD 12.0, and fixes numerous bugs in both ixl(4) and iavf(4).
This commit also re-adds the VF driver to GENERIC since it now compiles and
functions.
The VF driver name was changed from ixlv(4) to iavf(4) because the VF driver is
now intended to be used with future products, not just with Fortville/Fort Park
VFs.
A man page update that documents these drivers is forthcoming in a separate
commit.
Reviewed by: sbruno@, kbowling@
Tested by: jeffrey.e.pieper@intel.com
Approved by: re (gjb@)
Relnotes: yes
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D16429
The only source of documentation for this device is verilog,
so driver is minimalistic.
Reviewed by: Dr Jonathan Kimmitt <jrrk2@cam.ac.uk>
Approved by: re (kib)
Sponsored by: DARPA, AFRL
The change is a no-op for architectures which don't ifunc memset,
memcpy nor memmove.
Convert places which need them. Xen bits by royger.
Reviewed by: kib
Approved by: re (gjb)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17487
With lld 7.0.0, a rather nasty problem in our kernel linker script came
to light. We use quite a lot of so-called "orphan" sections, e.g.
sections which are not explicitly named in the linker script. Mainly,
these are the linker sets (such as set_sysinit_set).
Note that the placement of these orphan sections is not very well
defined. Usually, any read-only orphan sections get placed after the
last read-only section from the linker script, and similarly for the
read/write variants.
In our linker scripts, there are also symbol assignments like _etext,
_edata, and __bss_start, which are used in various places to refer to
the start or end addresses of sections.
However, some of these symbol assignments are interspersed with output
section descriptions. While the linker will guarantee that a symbol
assignment after some section will stay after that section, there is no
guarantee that an orphan section cannot be inserted just before it.
Take for example the following script:
SECTIONS
{
.data : { *(.data) }
__bss_start = .;
.bss : { *(.bss) }
}
If an orphan section (like set_sysinit_set) is now inserted just after
the __bss_start assignment, __bss_start will actually point to the start
of that orphan section, *not* to the start of the .bss section.
Unfortunately, something like this happened with our i386 kernel linker
script, and since sys/i386/i386/locore.s tries to zero .bss, it ended up
zeroing all the linker sets too, leading to a crash very soon after the
<--BOOT--> message.
To fix this, move the __bss_start symbol assignment *into* the .bss
section description, so there is no way a linker can then insert orphan
sections at that point. Also add a corresponding __bss_end symbol.
In addition, change sys/i386/i386/locore.s, so it clears from
__bss_start to __bss_end, instead of assuming that _edata is just
before .bss (which may not be true), and that _end is just after _bss
(which also may not be true).
This allows an i386 kernel linked with lld 7.0.0 to boot successfully.
Tested with ifunc resolvers in the kernel and module with calls from
kernel to kernel, module to kernel, and module to module.
Reviewed by: kib (previous version)
Approved by: re (gjb)
Differential Revision: https://reviews.freebsd.org/D17370
Both the in-kernel C variant and libc asm variant have very poor performance.
The former compiles to a single byte comparison loop, which breaks down even
for small sizes. The latter uses rep cmpsq/b which turn out to have very poor
throughput and are slower than a hand-coded 32-byte comparison loop.
Depending on size this is about 3-4 times faster than the current routines.
Reviewed by: kib
Approved by: re (gjb)
Differential Revision: https://reviews.freebsd.org/D17328
Building the kernel in Git repositories when git-svn is not available and
the "help.autocorrect" Git parameter is enabled results in Git trying to
replace the "svn" command (it does not know) with "serve". As a result the
output of the "git server" command is appended to the value of the
environmental variable VERINFO, which causes the auto generated vers.c
file to contain invalid C syntax (missing newline escapes):
#define "@(#)FreeBSD 12.0-ALPHA7 r000eversion 2
0015agent=git/2.19.0
000cls-refs
0012fetch=shallow
0012server-option
0000=5e2272613fa(splash-vt)"
#define VERSTR "FreeBSD 12.0-ALPHA7 r000eversion 2
0015agent=git/2.19.0
000cls-refs
0012fetch=shallow
0012server-option
0000=5e2272613fa(splash-vt)\n"
Using `-c help.autocorrect=0` seems to be a good solution as it does not
modify user's environment. I am not sure, however, if we should use
programs (or Git commands), which we are not sure exist (we never check if
git-svn is available on the host), as there may be more unexpected
behaviors like this one.
Reviewed by: eadler, emaste, krion
Approved by: re (gjb), krion (mentor)
Sponsored by: Bally Wulff Games & Entertainment GmbH
Differential Revision: https://reviews.freebsd.org/D17271
In non-reproducible mode we have the kernel ident as a side effect of
including the build directory. Explicitly add it to the ident string in
reproducible mode.
Reported by: mjg
Approved by: re (gjb)
Sponsored by: The FreeBSD Foundation
The amd64 kernel started using ifunc for a variety of functions with
arch-specific implementations, and we would like to make use of the
same functionality on i386 and as much as possible avoid divergence
between i386 and amd64. In particular, future changes for security
improvements and mitigations may rely on ifunc support.
Approved by: re (kib)
Sponsored by: The FreeBSD Foundation
r338642 toggled the REPRODUCIBLE_BUILD knob but missed the
corresponding kern.opts.mk change.
We want to build the 12.0 release artifacts with reproducible builds
mode enabled. Switch it on in HEAD now to enable testing with upcoming
ALPHA builds. We can revisit the default setting for HEAD after the
branch is created.
This change eliminates the build metadata (user, hostname, timestamp,
etc.) from the kernel and loader. If the src tree is a git, svn or p4
checkout with changes then the metadata is retained.
The WITHOUT_REPRODUCIBLE_BUILD src.conf(5) knob can be used to revert
to the previous behaviour.
Approved by: re (gjb)
Sponsored by: The FreeBSD Foundation
Both drivers use this interface so add a dependancy on it.
Since awg uses aw_sid for generating the MAC address, make it
depend on both aw_sid and nmvem so when only removing nvmem from
kernel config it will not include this driver.
Reported by: sbruno
Approved by: re (gjb)
newvers.sh supports two modes for reproducible builds:
-r Reproducible build. Do not embed directory names, user
names, time stamps or other dynamic information into
the output file. This is intended to allow two builds
done at different times and even by different people on
different hosts to produce identical output.
-R Reproducible build if the tree represents an unmodified
checkout from a version control system. Metadata is
included if the tree is modified.
Switch to the second mode when reproducible builds are enabled.
The value of a reproducible build is much less when building from an
uncontrolled, modified src tree, and -R likely provides the best
compromise in allowing the REPRODUCIBLE_BUILD knob to be enabled by
default for the release.
Approved by: re (kib)
Sponsored by: The FreeBSD Foundation
This was disabled recently due to lack of support in KDB disassembler
and DTrace FBT provider. Support for 'C'-extension to both of these was
added, so we can now enable 'C'-extension.
This reduces size of the kernel important for low-end embedded devices,
and saves cache footprint for high perfomance machines.
Approved by: re (kib)
Sponsored by: DARPA, AFRL
This appeared to be required to have EFI RT support and EFI RTC
enabled by default, because there are too many reports of faulting
calls on many different machines. The knob is added to leave the
exceptions unhandled to allow to debug the actual bugs.
Reviewed by: kevans
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Approved by: re (rgrimes)
Differential revision: https://reviews.freebsd.org/D16972
cycle. The i386 build failure appears to be transient, and
now becoming more difficult to reliably reproduce to identify
the cause. I will continue to investigate this, however.
Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation
Make the building of drm dependent on MK_MODULE_DRM and the building
of module drm2 on MK_MODULE_DRM2. The defaults are unchanged.
Approved by: re@ (gjb)
Differential Review: https://reviews.freebsd.org/D16894
given in random(4).
This includes updating of the relevant man pages, and no-longer-used
harvesting parameters.
Ensure that the pseudo-unit-test still does something useful, now also
with the "other" algorithm instead of Yarrow.
PR: 230870
Reviewed by: cem
Approved by: so(delphij,gtetlow)
Approved by: re(marius)
Differential Revision: https://reviews.freebsd.org/D16898
Revert r338177, r338176, r338175, r338174, r338172
After long consultations with re@, core members and mmacy, revert
these changes. Followup changes will be made to mark them as
deprecated and prent a message about where to find the up-to-date
driver. Followup commits will be made to make this clear in the
installer. Followup commits to reduce POLA in ways we're still
exploring.
It's anticipated that after the freeze, this will be removed in
13-current (with the residual of the drm2 code copied to
sys/arm/dev/drm2 for the TEGRA port's use w/o the intel or
radeon drivers).
Due to the impending freeze, there was no formal core vote for
this. I've been talking to different core members all day, as well as
Matt Macey and Glen Barber. Nobody is completely happy, all are
grudgingly going along with this. Work is in progress to mitigate
the negative effects as much as possible.
Requested by: re@ (gjb, rgrimes)
Per r338251, this ensures that ifunc calls have the same ordinary
function calls.
Reviewed by: emaste (previous version)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D16750
a10_timer is currently use in UP allwinner SoC (A10 and A13).
Those don't have the generic arm timer.
The arm generic timecounter is broken in the A64 SoC, some attempts have
been made to fix the glitch but users still reported some minor ones.
Since the A64 (and all Allwinner SoC) still have this timer controller, rework
the driver so we can use it in any SoC.
Since it doesn't have the 64 bits counter on all SoC, use one of the
generic 32 bits counter as the timecounter source.
PR: 229644
Add an option, KASSERT_PANIC_OPTIONAL, that allows runtime KASSERT()
behavior changes. When this option is not enabled, code that allows
KASSERTs to become optional is not enabled, and all violated assertions
cause termination.
The runtime KASSERT behavior was added in r243980.
One important distinction here is that panic has __dead2
("attribute((noreturn))"), while kassert_panic does not. Static analyzers
like Coverity understand __dead2. Without it, KASSERTs go misunderstood,
resulting in many false positives that result from violation of program
invariants.
Reviewed by: jhb, jtl, np, vangyzen
Relnotes: yes
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D16835
muge(4) is the USB ethernet adapter that is used in RPi 3B+. Shipping it
in GENERIC kernel allows using NFS root out of the box instead of either
building custom kernel or modifying loader.conf for early loading of if_muge.ko
No objections: emaste
