and arm64 so move any truncation to the caller.
Submitted by: Mihai Carabas <mihai.carabas@gmail.com>
X-Differential Revision: https://reviews.freebsd.org/D10213
Use them in some existing code that is vulnerable to roundoff errors.
The existing constant SBT_1NS is a honeypot, luring unsuspecting folks into
writing code such as long_timeout_ns*SBT_1NS to generate the argument for a
sleep call. The actual value of 1ns in sbt units is ~4.3, leading to a
large roundoff error giving a shorter sleep than expected when multiplying
by the trucated value of 4 in SBT_1NS. (The evil honeypot aspect becomes
clear after you waste a whole day figuring out why your sleeps return early.)
pmap_remap_vm_attr() function requires indexes to
pte2_attr_tab as the arguments (VM_MEMATTR_).
Mistakenly, instead of them, actual values from the
table were used (PTE2_ATTR_), when applying
work-around for Marvell Armada 38x SoCs.
Submitted by: Marcin Wojtas (mw@semihalf.com)
Reported by: Rafal Kozik (rk@semihalf.com)
Reviewed by: cognet (mentor)
Approved by: cognet (mentor)
Obtained from: Semihalf
Differential Revision: https://reviews.freebsd.org/D11704
The TEX index is selected using (TEX0 C B) bits
from the L2 descriptor. Use correct index by masking
and shifting those bits accordingly.
Differential Revision: https://reviews.freebsd.org/D11703
If we cannot get a phy, do not detach the driver, some boards have phy
always enabled and not exposed.
While here do not release the clocks if we fails as we release them
in a10_ehci_detach.
Tested-on: OrangePi-One
It turns out that this is more than a power optization. The OTG port
won't work on boards that have this property unless this setting is honored.
Also ensure that the usb phy device attaches before ehci.
This allows multiple instances of SoCs that use the pl310 driver to be
built within the same kernel:
* Add access to the platform_t object from outside platform.c
* Use this with the pl310 driver
There is a new platform_pl310 interface to replace the existing code. SoCs
need to implement the init method, and if they have special requirements to
write to the two registers we care about will also need to implement the
write_ctrl and write_debug methods.
Differential Revision: https://reviews.freebsd.org/D11546
Implement the MMC/SD/SDIO protocol within a CAM framework. CAM's
flexible queueing will make it easier to write non-storage drivers
than the legacy stack. SDIO drivers from both the kernel and as
userland daemons are possible, though much of that functionality will
come later.
Some of the CAM integration isn't complete (there are sleeps in the
device probe state machine, for example), but those minor issues can
be improved in-tree more easily than out of tree and shouldn't gate
progress on other fronts. Appologies to reviews if specific items
have been overlooked.
Submitted by: Ilya Bakulin
Reviewed by: emaste, imp, mav, adrian, ian
Differential Review: https://reviews.freebsd.org/D4761
merge with first commit, various compile hacks.
This driver is standard rather than optional because it can always provide
time after a reboot, but it will only provide time after a power cycle if
battery power is supplied to the chip's SNVS power domain.
Upstream DTS for A64 SoC doesn't provide a /clocks node as Linux switched
to ccu-ng
This commit adds the necessary bits to boot on pine64 with latest DTS from
upstream.
USB is not working for now and some node aren't present in the DTS (like the
PMU, Power Management Unit).
Tested on: Pine64
--Remove special-case handling of sparc64 bus_dmamap* functions.
Replace with a more generic mechanism that allows MD busdma
implementations to generate inline mapping functions by
defining WANT_INLINE_DMAMAP in <machine/bus_dma.h>. This
is currently useful for sparc64, x86, and arm64, which all
implement non-load dmamap operations as simple wrappers
around map objects which may be bus- or device-specific.
--Remove NULL-checked bus_dmamap macros. Implement the
equivalent NULL checks in the inlined x86 implementation.
For non-x86 platforms, these checks are a minor pessimization
as those platforms do not currently allow NULL maps. NULL
maps were originally allowed on arm64, which appears to have
been the motivation behind adding arm[64]-specific barriers
to bus_dma.h, but that support was removed in r299463.
--Simplify the internal interface used by the bus_dmamap_load*
variants and move it to bus_dma_internal.h
--Fix some drivers that directly include sys/bus_dma.h
despite the recommendations of bus_dma(9)
Reviewed by: kib (previous revision), marius
Differential Revision: https://reviews.freebsd.org/D10729
When a pin is set for input the value in the DR will be the same as the PSR.
When a pin is set for output the value in the DR is the value output to the
pad, and the value in the PSR is the actual electrical level sensed on the
pad, and they can be different if the pad is configured for open-drain mode
and some other entity on the board is driving the line low.
H2+ SoC is a stripped down version of H3 without gigabit ethernet and 4K HDMI.
Also add sun8i-h2-plus-orangepi-zero.dts to the build as we run on this board.
Armada 38x SoCs, in order to work properly in IO-coherent mode,
requires an update of the MBUS windows attributesd.
This patch also configures nexus coherent dma tag, because all
busses and children devices have to inherit this setting in runtime.
The latter has to be executed as a sysinit (SI_SUB_DRIVERS type),
so that bus_dma_tag_create() can be executed properly.
Submitted by: Michal Mazur <mkm@semihalf.com>
Marcin Wojtas <mw@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Reviewed by: ian
Differential revision: https://reviews.freebsd.org/D11203
Allow to set the dma tag for nexus in the platform init code,
so that all busses and devices would be able to inherit it.
This change is useful e.g. for setting coherent dma tag for
the platforms with hardware IO cache coherency.
Submitted by: ian
Michal Mazur <mkm@semihalf.com>
Reviewed by: ian
Differential revision: https://reviews.freebsd.org/D11202
- Inherit BUS_DMA_COHERENT flag from parent buses
- Use cacheable memory attributes on dma coherent platform
- Disable cache synchronization on coherent platform
Changes are based on ARMv8 busdma code and commit r299683.
Submitted by: Michal Mazur <mkm@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Reviewed by: ian
Differential revision: https://reviews.freebsd.org/D11201
When a PL310 cache is used on a system that provides hardware
coherency, the outer cache sync operation is useless, and can be
skipped. Moreover, on some systems, it is harmful as it causes
deadlocks between the Marvell coherency mechanism, the Marvell PCIe
or Crypto controllers and the Cortex-A9.
To avoid this, this commit introduces a new Device Tree property
'arm,io-coherent' for the L2 cache controller node, valid only for the
PL310 cache. It identifies the usage of the PL310 cache in an I/O
coherent configuration. Internally, it makes the driver disable the
outer cache sync operation.
Note, that other outer-cache operations are not removed, as they may
be needed for certain situations, such as booting secondary CPUs.
Moreover, in order to enable IO coherent operation, the decision
whether to use L2 cache maintenance callbacks is done in busdma
layer, which was enabled in one of the previous commits.
Submitted by: Michal Mazur <mkm@semihalf.com>
Marcin Wojtas <mw@semihalf.com>
Reviewed by: mmel
Obtained from: Semihalf
Differential revision: https://reviews.freebsd.org/D11245
There is a hardware problem between Cortex-A9 CPUs and on-chip devices
in Armada 38X SoCs that may cause hang on heavy load. This can be
however worked around by mapping all registers and PCI IO
as strongly ordered instead of device memory.
Submitted by: Zbigniew Bodek <zbb@semihalf.com>
Reviewed by: mmel
Tested by: mw_semihalf.com
Obtained from: Semihalf
Differential revision: https://reviews.freebsd.org/D10218
Starting with DTS from Linux 4.11, the pins list, function, drive and pull
are no longer prefixed with "allwinner,".
Allow the pinctrl driver to handle both case.
load and unload it all the time since the buffer never changes. In
addition, we were loading it with a hardware spin lock held, which
makes the sleepable lock in busdma (for the bounce pages) trigger a
witness warning, as well as ipend being called with it held by uart,
which made it impossible to unload.
These differences don't matter with the v4 busdma implementation, but
they do with the v6 implementation since the latter likes to bounce
transactions more, and will always do so for Atmel's driver.
It's more efficient as well as being more correct.
timecounter instead of the GPT timer, freeing up the more flexible GPT
hardware for other uses. The EPIT driver is a standard (always in the
kernel) driver, and the existing GPT driver is now optional and included
only if you ask for device imx_gpt.
global timer was successful, since the implementation tries to read it.
Notably, if the platform has a variable-frequency global timer (because
of dynamic frequency scaling), it doesn't set up the global timer for use
as a system timecounter, and in that case it also can't use it for DELAY.
Such platforms use different timer hardware for both timecounter and DELAY.
The arm kernel linker scripts place the .init_pagetable section in .bss,
but .init_pagetable had no section flags set, and so did not match the
expected flags for .bss.
GNU ld silently ignores this case, but lld reports an error:
ld: error: incompatible section flags for .bss
>>> locore.o:(.init_pagetable): 0x0
>>> output section .bss: 0x3
PR: 220055
Submitted by: mmel, Rafael Espíndola
MFC after: 3 weeks
Sponsored by: The FreeBSD Foundation
Currently some ARM platforms implement their own platform_probe_and_attach()
function and other use common routine that calls platform's PLATFORM_ATTACH
method.
Keep the old description to match the preferred way of naming things.
Pointed out by: andrew
This commit enables usage of HWPMC interrupts for the
Marvell SoCs, which use MPIC (Armada38x and ArmadaXP).
Those interrupts require extra unmasking, comparing to
others. Also, in order to process counters per-CPU,
they are masked/unmasked using separate registers' sets
for each core.
Submitted by: Michal Mazur <mkm@semihalf.com>
Marcin Wojtas <mw@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield, Netgate
Differential revision: https://reviews.freebsd.org/D10913
This patch contains a new driver for the network unit of Marvell
Armada 38x/XP SoCs, called NETA. This support was thoroughly tested
and optimised in terms of stability and performance. Additional
hardware features, like Buffer Management (BM) or Parser and Classifier
(PnC) will be progressively supported as needed.
Submitted by: Fabien Thomas <fabien.thomas@stormshield.eu>
Arnaud Ysmal <arnaud.ysmal@stormshield.eu>
Zbigniew Bodek <zbb@semihalf.com>
Michal Mazur <mkm@semihalf.com>
Bartosz Szczepanek <bsz@semihalf.com>
Marcin Wojtas <mw@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield (main development)
Netgate (cleanup and upstreaming)
Differential revision: https://reviews.freebsd.org/D10706
These quirks are intended for optimizing CPU performance, not for
applying errata workarounds. Nobody can expect that CPU with unfixed
errata is stable enough to execute the kernel until quirks are applied.
MFC after: 3 weeks
struct thread.
For all architectures, the syscall trap handlers have to allocate the
structure on the stack. The structure takes 88 bytes on 64bit arches
which is not negligible. Also, it cannot be easily found by other
code, which e.g. caused duplication of some members of the structure
to struct thread already. The change removes td_dbg_sc_code and
td_dbg_sc_nargs which were directly copied from syscall_args.
The structure is put into the copied on fork part of the struct thread
to make the syscall arguments information correct in the child after
fork.
This move will also allow several more uses shortly.
Reviewed by: jhb (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
X-Differential revision: https://reviews.freebsd.org/D11080
This commit is another part of preparation for PCIe multi-port
support for Marvell SoCs. Some device trees include pcie-controller
node as a bus-parent of pcie nodes. This patch adds support for
new bus, collects and configures device informations and finally
adds PCIB devices as a childs of pcie-controller in Newbus hierarchy.
Submitted by: Marcin Mazurek <mma@semihalf.com>
Obtained form: Semihalf
Sponsored by: Stormshield
Reviewed by: https://reviews.freebsd.org/D10906
Original PCIe nodes for Marvell SoCs consists of ports' nodes
under main controller node. In order to properly parse
this kind of representation in DT a mechanism for traversing
through the tree required an update. Moreover, processing FDT
data consisting of more than 2 cells had to be fixed,
because the 'reg' property of mrvl,pcie node have additional
parameter in front of 64-bit address. It should be skipped
by default. This commit works properly with old mrvl,pcie
representation for Kirkwood and ArmadaXP SoCs.
Submitted by: Wojciech Macek <wma@semihalf.com>
Michal Mazur <mkm@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield, Netgate
Differential revision: https://reviews.freebsd.org/D10905
This patch fixes sporadic problems with updating time
with mv_rtc driver by configuring access to it via MBUS.
For this purpose already existing second set of resources
in rtc@3800 node of Armada 38x DT is used.
Submitted by: Dominik Ermel <der@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Differential revision: https://reviews.freebsd.org/D10901
This commit enables optional reset of the RTC, in case
its registers' contents did not sustain the reboot or power-off/on
sequence. Without it, further usage of RTC is impossible
(e.g. writing values to RTC_TIME register will not succeed).
The reset is performed only if Clock Correction register
does not comprise RTC_NOMINAL_TIMING, what helps to distinguish,
whether the software configured RTC before or it comprises
the default value.
Submitted by: Bartosz Szczepanek <bsz@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Differential revision: https://reviews.freebsd.org/D10900
could be overridden in the SoC specific code, but this would break GENERIC
as it is likely to be incorrect.
Remove the versatile implementation of cpu_initclocks as it's unneeded.
This patch fixes a bug introduced with commit:
r294510 "Remove an extra '!' found by clang 3.8."
'!' was removed without inverting the logic, which
broke PCIe legacy interrupts operation for Marvell
controllers.
Submitted by: Michal Mazur <mkm@semihalf.com>
Obtained from: Semihalf
Sponsored by: Netgate
Armada 38x SoC's equipped with 4GB DRAM suffer freeze
during CESA operation, if MBUS window opened at given
DRAM CS reaches end of the address space. Apply a workaround
by setting the window size to the closest possible
value, i.e. divide it by 2 (it has to be power-of-2).
Submitted by: Marcin Wojtas <mw@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Differential revision: https://reviews.freebsd.org/D10724
PM status is only supported on Kirkwood and Disvovery.
Cleanup the code to properly report its state on
other platforms.
Submitted by: Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Differential revision: https://reviews.freebsd.org/D10718
DELAY is a problematic routine called all over the kernel.
Armada38x using CA-9 CPUs are using mpcore timer to count events
and measure time but DELAY in the mpcore timer code is a weak
function reference and therefore will be replaced by the platform
implementation if the one is introduced. Since Armada38x uses
on-chip watchdog to which the driver is merged with the on-chip timer
driver there will be a platform DELAY implementation.
The latter however will not use any HW timers as it will not attempt
to configure any. Phony busy loop will be used instead.
To fix that we introduce a separate watchdog driver for Armada platforms,
(currently only A38X) and stop using Marvell timer driver. That
switches DELAY to the desired implementation.
Submitted by: Zbigniew Bodek <zbb@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Differential revision: https://reviews.freebsd.org/D10710
Resolving CPU windows from localbus entry caused buffer overflow
and memory corruption. Fix wrong indexing and ensure the index
does not exceed table size.
Submitted by: Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Differential revision: https://reviews.freebsd.org/D10720
Marvell Armada 380 is a uni-processor variant of the 38x SoC
family. A function platform_mp_setmaxid() was setting a hardcoded
value, which caused boot fail on A380. Fix this by relying on
the CPU count obtained from device tree nodes.
Submitted by: Marcin Wojtas <mw@semihalf.com
Obtained from: Semihalf
Sponsored by: Netgate
Reviewed by: loos
Differential revision: https://reviews.freebsd.org/D10783
Before the fix for single interrupt, both percpu and non-percpu routes
were enabled/disable at the same time.
Submitted by: Marcin Wojtas <mw@semihalf.com
Obtained from: Semihalf
Sponsored by: Stormshield, Netgate
Reviewed by: loos
Differential revision: https://reviews.freebsd.org/D10716
For all Marvell devices, MBUS windows configuration is done
in a common place. Only CESA was an exception, so move its
related code from driver to mv_common.c. This way it uses
same proper DRAM information, same as all other interfaces
instead of parsing DT /memory node directly.
Submitted by: Marcin Wojtas <mw@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Reviewed by: loos
Differential revision: https://reviews.freebsd.org/D10723
consistent and easier to read.
While here, remove two unused static functions and fix a unused function
warning when building !INTRNG.
No functional changes.
Sponsored by: Rubicon Communications, LLC (Netgate)
If MPIC happens to be a slave interrupt controller (as on Armada38x),
it should be attached after primary interrupt controller.
Thus BUS_PASS_ORDER_LATE was added to default BUS_PASS_INTERRUPT.
This change doesn't affect the cases when MPIC is standalone IC.
Submitted by: Bartosz Szczepanek <bsz@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield, Netgate
Reviewed by: loos
Differential revision: https://reviews.freebsd.org/D10715
OF_finddevice doesn't find the "simple-bus" node, which is problematic
for Marvell platforms, using nested buses in Device Tree, like
Armada 38x SoC.
Submitted by: Arnaud Ysmal <arnaud.ysmal@stormshield.eu>
Obtained from: Stormshield
Sponsored by: Stormshield
Reviewed by: loos
Differential revision: https://reviews.freebsd.org/D10719
A long long time ago the register keyword told the compiler to store
the corresponding variable in a CPU register, but it is not relevant
for any compiler used in the FreeBSD world today.
ANSIfy related prototypes while here.
Reviewed by: cem, jhb
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D10193
This patch improves the boundary checks in busdma to allow more cases
using the regular page based kernel memory allocator. Especially in
the case of having a non-zero boundary in the parent DMA tag. For
example AMD64 based platforms set the PCI DMA tag boundary to
PCI_DMA_BOUNDARY, 4GB, which before this patch caused contiguous
memory allocations to be preferred when allocating more than PAGE_SIZE
bytes. Even if the required alignment was less than PAGE_SIZE bytes.
This patch also fixes the nsegments check for using kmem_alloc_attr()
when the maximum segment size is less than PAGE_SIZE bytes.
Updated some comments describing the code in question.
Differential Revision: https://reviews.freebsd.org/D10645
Reviewed by: kib, jhb, gallatin, scottl
MFC after: 1 week
Sponsored by: Mellanox Technologies
sdhci_fdt.
Enable the SDHCI controller, bus and devices on ARMADA38X kernel.
Tested on: ClearFog Pro
Reviewed by: Marcin Wojtas <mw at semihalf.com>
Sponsored by: Rubicon Communications, LLC (Netgate)
Differential Revision: https://reviews.freebsd.org/D10606
Tested on: ClearFog Pro
Reviewed by: Marcin Wojtas <mw at semihalf.com>
Sponsored by: Rubicon Communications, LLC (Netgate)
Differential Revision: https://reviews.freebsd.org/D10601
In real GNU libgcc, _Unwind_Backtrace is published with GCC_3.3 version
for all architectures but ARM. For ARM it's publishes with GCC_4.3.0
version.
This exception is not implement in your version of libggc, thus we
export _Unwind_Backtrace with bad version. To maintain backward
compatibility, publish _Unwind_Backtrace twice, once as compatible
symbol with GCC_3.3 version, and once as default symbol with
GCC_4.3.0 version.
While I'm in, fix typo in GCC_4.2.0 to GCC_4.3.0 inheritance declaration.
MFC after: 2 weeks
it allows to remap one VM memattr class to another.
This function is intent to be used as workaround for various SoC bugs,
mainly access ordering/sequencing related bugs in crossbar fabric.
Inspired by: https://reviews.freebsd.org/D10218
MFC after: 2 weeks
This code base on lpc code. Ralink RT1310 is oem from 5V Technologies.
RT1310 is ARM926EJS(arm5t).
Tested:
* Buffalo WZR2-G300N
Submitted by: Hiroki Mori <yamori813@yahoo.co.jp>
Reviewed by: mizhka
Differential Revision: https://reviews.freebsd.org/D7238
before we increase irq again, or we'd end up choosing an irq, and then
really using the next one, even if it's not available.
Also in the inner loop, correct the end check so that we check every irq,
even the last one.
This makes the msk(4) adapter able to use MSI on Softiron Overdrive 1000.
Add early init handler, which comprises various internal
bus optimisations for Armada 38x SoC's. Magic values used
due to undocumented registers.
Submitted by: Marcin Wojtas <mw@semihalf.com>,
Arnaud Ysmal <arnaud.ysmal@stormshield.eu>
Obtained from: Semihalf, Stormshield
Sponsored by: Stormshield
Differential revision: https://reviews.freebsd.org/D10219
Part of PL310 erratum 727915 in pl310_wbinv_range() was
executed uncoditionally for all possible controllers'
revisions. This patch adds appropriate condition, since
extra operations are required only for revisions between
r2p0 and r3p0.
Submitted by: Marcin Wojtas <mw@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Reviewed by: meloun-miracle-cz
Differential revision: https://reviews.freebsd.org/D10221
Introduce machine-dependent part of the arm/pl310 driver for
Armada 38x SoCs. Add prefetch and power savings configuration.
Submitted by: <arnaud.ysmal@stormshield.eu>
Obtained from: Stormshield
Sponsored by: Stormshield
Differential revision: https://reviews.freebsd.org/D10220
Memory space reserved for pmap_kernel_l2dtable_kva and
pmap_kernel_l2ptp_kva has not been taken into account in
original code. All the memory reserved from kernel space by
pmap_alloc_specials() function called in pmap_bootstrap()
should be mapped initially by initarm(). To create initial
mapping initarm() function reserves proper number of l2 page
tables. However the number of the l2 page tables does not take
into account memory for: pmap_kernel_l2ptp_kva,
pmap_kernel_l2dtable_kva, crashdumpmap, etc.
Submitted by: Grzegorz Bernacki <gjb@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Reviewed by: meloun-miracle-cz
Differential revision: https://reviews.freebsd.org/D10217
VM_KMEM_SIZE_MAX allows to limit kmem arena size. In our case this was
necessary, as decreasing size of kmem_arena leaves more space for
kernel_arena.
kernel_arena is pool used for contigmalloc (in effect, DMA) allocations,
which failed on Armada38x. This resulted in 'no memory errors'
(e.g. USB_ERR_NOMEM errors) and failure of whole system. The need for
greater size of kernel_arena probably comes from more peripherals making
use of busdma.
Value used as upper limit is half of the default value
(0x1399a000).
Submitted by: Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Differential revision: https://reviews.freebsd.org/D10216
in place. To do per-cpu stats, convert all fields that previously were
maintained in the vmmeters that sit in pcpus to counter(9).
- Since some vmmeter stats may be touched at very early stages of boot,
before we have set up UMA and we can do counter_u64_alloc(), provide an
early counter mechanism:
o Leave one spare uint64_t in struct pcpu, named pc_early_dummy_counter.
o Point counter(9) fields of vmmeter to pcpu[0].pc_early_dummy_counter,
so that at early stages of boot, before counters are allocated we already
point to a counter that can be safely written to.
o For sparc64 that required a whole dummy pcpu[MAXCPU] array.
Further related changes:
- Don't include vmmeter.h into pcpu.h.
- vm.stats.vm.v_swappgsout and vm.stats.vm.v_swappgsin changed to 64-bit,
to match kernel representation.
- struct vmmeter hidden under _KERNEL, and only vmstat(1) is an exclusion.
This is based on benno@'s 4-year old patch:
https://lists.freebsd.org/pipermail/freebsd-arch/2013-July/014471.html
Reviewed by: kib, gallatin, marius, lidl
Differential Revision: https://reviews.freebsd.org/D10156
imx6 based on a single cortex-a7 core. Other changes to imx6 drivers
and support code are needed to fully support the imx6ul.
Also fix an indentation glitch committed in the prior change.
driver for imx6. Some newer dts source puts the GIC node at the root
instead of under /soc, so look in both places. Also, sometimes the GIC
node doesn't list itself as its own interrupt-parent, allow that too.
At this point, INTRNG is not going away (the option may go away, but the
code is not), so we no longer need code to support workarounds that handled
the lack of INTRNG functionality.
The MFC will include a compat definition of smp_no_rendevous_barrier()
that calls smp_no_rendezvous_barrier().
Reviewed by: gnn, kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D10313
FreeBSD's DTS contained only one PL050 node and driver considered it to
be PS/2 keyboard. In reality PL050 is a PS/2 port that pushes bytes to/from
the periphers connected to it. New DTS contains two nodes and QEMU emulates
keyboard connected to port #0 and mouse connected to port #1. Since there
is no way to say what's connected to port by checking DTS we hardcode
this knowledge in the driver: it assumes keyboard on port #0 and ignores
port #1 altogether.
Also QEMU defaults emulated keyboard to scan code set 2 while driver used
to work with scan code set 1 so when initializing driver make sure keyboard
is switched to scan code set 1
Scope of this change is somewhat larger than just converting to INTRNG.
The reason for this is that INTRNG support required switching from custom
to upstream DTS because custom DTS didn't have interrup routing information.
This switch caused rewrite of PCI and CLCD drivers and adding SCM module.
List of changes in this commit:
- Enable INTRNG and switch to versatile-pb.dts
- Add SCM driver that controls various peripheral devices like LCD or
PCI controller. Previously registers required for power-up and
configuring peripherals were part of their respective nodes. Upstream
DTS has dedicated node for SCM
- Convert PL190 driver to INTRNG
- Convert Versatile SIC (secondary interrupt controller) to INTRNG
- Refactor CLCD driver to use SCM API to power up and configuration
- Refactor PCI driver to use SCM API to enable controller
- Refactor PCI driver to use interrupt map provided in DTS for
interrupt routing. As a result it fixes broken IRQ routing and
it's no longer required to run QEMU with "-global versatile_pci.broken-irq-mapping=1"
command-line arguments
Fallback to Linux video interface bindings introduced in r313068 worked
with then current DTS but that DTS turned out to be not conformant to
the the bindings spec. DTS import in r314854 fixed the conformancy but
broke the functionality. This commit syncs up functionality to the actual
spec.
Reported by: manu@
cfumass(4) is not usable if usfs(4) is loaded or compiled into the
kernel. Remove usfs so that the user may kldload the USB mass storage
target they prefer.
PR: 218169
Reviewed by: trasz, hselasky (no objection)
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D10153
I fixed this in 1997, but the fix was over-engineered and fragile and
was broken in 2003 if not before. i386 parameters were copied to 8
other arches verbatim, mostly after they stopped working on i386, and
mostly without the large comment saying how the values were chosen on
i386. powerpc has a non-verbatim copy which just changes the uncritical
parameter and seems to add a sign extension bug to it.
Just treat negative offsets as offsets if they are no more negative than
-db_offset_max (default -64K), and remove all the broken parameters.
-64K is not very negative, but it is enough for frame and stack pointer
offsets since kernel stacks are small.
The over-engineering was mainly to go more negative than -64K for the
negative offset format, without affecting printing for more than a
single address.
Addresses in the top 64K of a (full 32-bit or 64-bit) address space
are now printed less well, but there aren't many interesting ones.
For arches that have many interesting ones very near the top (e.g.,
68k has interrupt vectors there), there would be no good limit for
the negative offset format and -64K is a good as anything.
We don't have enouch space to store full VFP context within mcontext
stucture. Due to this:
- follow i386/amd64 way and store VFP state outside of the mcontext_t
but point to it. Use the size of VFP state structure as an 'magic'
indicator of the saved VFP state presence.
- teach set_mcontext() about this external storage.
- for signal delivery, store VFP state to expanded 'struct sigframe'.
Submited by: Andrew Gierth (initial version)
PR: 217611
MFC after: 2 weeks
FreeBSD uses upstream DTB for RPi3 build and compatibility string for
i2c device is different there. Add this new string to compatibility data.
Reported by: Karl Denninger
MFC after: 3 days
- in mcontext_t, rename newer used 'union __vfp' to equaly sized 'mc_spare'.
Space allocated by 'union __vfp' is too small and cannot hold full
VFP context.
- move structures defined in fp.h to more appropriate headers.
- remove all unused VFP structures.
MFC after: 2 weeks
Newbus handles multiple equally named device classes without problems,
so there is no reason to use slightly cryptic "<foo>_shdci" for them.
In contrast, the driver module name must be unique, so "<foo>_shdci"
is the right name for it.
matches static binaries.
Interpretation of the 'static' there is that the binary must not
specify an interpreter. In particular, shared objects are matched by
the brand if BI_CAN_EXEC_DYN is also set.
This improves precision of the brand matching, which should eliminate
surprises due to brand ordering.
Revert r315701.
Discussed with and tested by: ed (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
CloudABI executables are statically linked and don't have an
interpreter. Setting the interpreter path to NULL used to work
previously, but r314851 introduced code that checks the string
unconditionally. Running CloudABI executables now causes a null pointer
dereference.
Looking at the rest of imgact_elf.c, it seems various other codepaths
already leaned on the fact that the interpreter path is set. Let's just
go ahead and pick an obviously incorrect interpreter path to appease
imgact_elf.c.
MFC after: 1 week
calculated at runtime based on how long it takes to set up an event in
hardware. This fixes the intermittant 1-minute hang at boot on imx5
systems, and also the occasional oversleeping while running. It doesn't
affect imx6 systems, which use different hardware for eventtimers.
It turns out that it usually takes about 30 timer ticks to set up the timer
compare register, and the old hard-coded minimum period was 10 ticks. On
the rare occasions when a timeout event that short was set up, we'd miss
the event and have to wait about 64 seconds for counter rollover before
the compare interrupt would fire.
Instead of just hardcoding a new bigger value, the code now measures the
time it takes to do the register read/write sequence to set up the compare
register, scales it up by 1.5x to be safe, and calculates the minimum event
period from the result. In the real world, the minimum period works out to
about 750 nanoseconds on imx5 hardware.
It turns out to be surprisingly expensive to access the gpt hardware (on the
order of 150ns per read/write). To cut down on the overhead of setting up
each eventtimer event, eliminate read-modify-write sequences to manage the
compare interrupt enable, by keeping a shadow copy of the hardware register
and only writing to the hardware when the enable bits really change.
cleanups enabled by that:
- The only thing left in imx_gptvar.h was the softc, which IMO never
should have been in there at all. Move it into the driver, and
delete the header file.
- Remove several unneeded #includes from the driver.
- Change imx_gpt_softc from global to static (it's used by DELAY()), and
don't redundantly static-initialize it to NULL.
