we created for the boot floppy, or 2) construct an EFI partition
by copying bits from /boot. The first approach creates a bootable
CD image that loads a memory disk and starts sysinstall, the second
approach creates a generic bootable CD.
Add to floppy3 if_tun && if_gif (ppp && something related to IPv6)
Add in mpt && ahc now that they are modules. Unknown as to whether they
work yet or not.
build.
This will give ia64 folks the chance to help flesh these out, and
also ensure that (when the time comes) ia64 releases with documentation
won't fall over due to missing RELNOTESng files.
This involves moving all networking drivers to floppy 2, all RAID
nfsclient && cd9660 to floppy 3 (and adding ispfw).
COMPAT_FREEBSD4 had to come back, maxusers is down to 2.
AHC is out until somebody can make it a module for alpha.
TurboLaser is out because it rarely has a floppy and probably
no longer works *anyway*.
There's probably some cleanup that can be done because I was told
that things in drivers.conf don't have to be removed via dokern.sh,
but because I formally tested the release build with this version
and don't want to spend another half day on it, it's going in.
I'm sure we'll have to do some further changes prior to release.
NB: Not tested end to end yet because I've been told that sysinstall
doesn't yet work.
o All of the Q&A entries in this section were i386-specific, so make
these conditional on building for that platform. If
non-i386-platforms need similar Q&A lists, they can add their own to
this file.
o Coalesce the two Q&A sections into one.
o Correct some device names (wd(4) devices have not existed for quite
some time).
o Get rid of a number of obsolete entries (suggested by jhb).
if it's not defined as efi. This makes sure we create a proper
MFS root filesystem and still allow the boot disk to be EFI
based.
At this time EFI auto boot works and we're properly loading the
MFS root file system. Time to create drivers.conf and get this
show on the road!
o ia64: Set DOFS_SH to point to an alternate version.
o ia64: Lower BIGBOOTSIZE from 120M (LS-120) to ~5M.
o ia64: Set BIGBOOTLABEL to efi so that we can check for it
in the alternate doFS.sh script. If the label is not efi, we
can invoke the generic doFS.sh.
Strip ${RD}/mfsfd/stand/etc/defaults/rc.conf.
Don't copy loader.help to ${RD}/mfsfd/boot, it serves no useful purpose.
Removed the now no-op commands to copy ${RD}/trees/base/dev bits to
${RD}/mfsfd/dev, now that DEVFS is the default.
Removed UFS_ACL, PSEUDOFS, and COMPAT_FREEBSD4 options from the BOOTMFS
kernel.
Moved miibus network module to the drivers floppy.
isp(4) and mpt(4) now have corresponding modules, move them to the third
floppy as well.
Caution! With these changes, mfsroot.flp has only 11K left, and
kern.flp has even less -- 5K.
the loader in an EFI partition. This automaticly means we need the
kernel there as well.
In order to avoid having to worry about a geometry as much as
possible, we partition the disk with GPT.
With this, auto-boot works, but we have a problem mounting the
MFS.
in no way final. A typical ia64 wart is that there are no boot blocks.
Instead, we need to create disks with EFI partitions if we want auto
boot to work. All this functionality is not present yet.
was no history to speak of, a repocopy would not have bought us
anything. Versions copied:
../sparc64/boot_crunch.conf,v 1.3 2002/11/01 15:29:35 jhb
../sparc64/dokern.sh,v 1.1 2002/10/13 18:36:06 jake
../sparc64/mkisoimages.sh,v 1.1 2002/10/13 18:36:06 jake
obtained from: jake, jhb
chapeau: jkh (mkisoimages.sh)
can fetch it from there instead of looking in the boot floppy's
directory.
- Add a NO_FLOPPIES variable that disables building of any boot floppies.
Tested on: alpha
for FreeBSD base system programs, rewrite expr(1) entry and note its
use of check_utility_compat(3), mention autogeneration of
nsswitch.conf and hosts.conf.
Mostly submitted by: wollman
(But any mistakes are solely mine.)
think this list of the bare minimal ports required should maybe be
moved to textproc/docproj/Makefile, so that when we add a new
dependency there, we can just add it to a required or optional list,
rather than add it there and forget about it here. ;)
Noticed by: jhay
Forgotten by: nik
release" a chance of finishing on the Alpha platform.
The actual split between drivers on disks 2 and 3 should be optimized
so that most users don't need the third disk, but for now, I'm just
trying to get it working.
is "EARLY", which is kind of an odd name, but I couldn't think of
anything better that fit the traditional 8.3 naming convention for
release documentation files.
substitute normal DocBook. Pure coincidence that this thing built.
While here, pull in some more entities so that we can build in the
RELNOTESng environment.
o mount (and unmount) devfs in the chroot'd filesystem
o handle umounting devfs in case of a keyboard interrupt
o remove MAKEDEV from the fixit floppy so things fit again (mount_devfs was
added in a separate commit)
o explicitly remove mfsroot.gz and loader.conf when building the cd-rom area
as otherwice cp -Rp aborts when a previous run left identical files around
o increase the number of inodes on the drivers floppy; moving drivers from
the kernel there (to shrink it's size) caused things to overflow
o while we're increasing the driver's floppy inode config, separate out all
parameters from the boot floppy
Approved by: re
the BOOTMFS kernel. These help reduce the kernel size so things fit
in a floppy image. There are more low-hanging fruit to be had here
if things fail to fit again.
to reduce the size of the bootstrap kernels. This is needed to make
stuff fit in primary floppy images. Specific drivers moved: RAID
support, tx Ethernet, and wi (wireless). Probably want to revisit
at least the last two drivers before release.
Submitted by: jhay (mostly)
floppies.
kern-small.flp and mfsroot-small.flp are for old machines that don't
support 1.44MB floppy. These floppies don't have pci related devices.
kern.flp and mfsroot.flp are normal 1.44MB floppy images.
time before the release (novel concept for me, I know :( )
Translation updates:
hardware/alpha/proc-alpha.sgml: 1.41 -> 1.44
hardware/common/dev.sgml: 1.91 -> 1.106
hardware/i386/proc-i386.sgml: 1.2 -> 1.3
relnotes/common/new.sgml: 1.355 -> 1.432
relnotes/common/relnotes.ent: 1.2 -> 1.3
Translation fixes:
hardware/sparc64/proc-sparc64.sgml
installation/common/install.sgml
installation/common/trouble.sgml
installation/sparc64/install.sgml
readme/article.sgml
Affected by the removal of the seperate release.ent file (FINALLY!):
errata/article.sgml
hardware/alpha/article.sgml
hardware/i386/article.sgml
hardware/ia64/article.sgml
hardware/sparc64/article.sgml
installation/alpha/article.sgml
installation/i386/article.sgml
installation/sparc64/article.sgml
relnotes/alpha/article.sgml
relnotes/i386/article.sgml
relnotes/sparc64/article.sgml
share/sgml/catalog
share/sgml/release.dsl
share/sgml/release.ent
Changed for the addition of the PC98 release notes, German version
hardware/Makefile
installation/Makefile
relnotes/Makefile
hardware/common/hw.ent
(and of course all the new files for pc98)
Thanks again to Martin Heinen for cleanup.
in seperate directories. This mostly affects RELENG_4 where
not doing so results in ${CHROOTDIR}/usr/src/release being
filled with object files, and "srelease" distribution having
them in.
PR: misc/43825
Prodded by: re (murray)
