Make DPDK enable SRIOV flag in same way as Linux and FreeBSD.
Fixes: dc7680e859 ("net/netvsc: support integrated VF")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Before this patch, there are two functions will call
i40e_dev_free_queues to free queues. For rte_eth_dev_close(), its
redundant because of duplication. For rte_eth_dev_reset() its
redundant because of not necessary, since following dev_configure
is required after dev_reset and it will be updated correctly.
This patch removes redundant code in i40e_dev_free_queues().
Fixes: 6b45371283 ("i40e: free queue memory when closing")
Cc: stable@dpdk.org
Signed-off-by: Zhirun Yan <zhirun.yan@intel.com>
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This reverts
commit 09a62d7569 ("net/i40e: fix offload not supported mask")
Contrary to what is said in above patch commit log,
I40E_TX_OFFLOAD_NOTSUP_MASK is the mask of Tx offload bits that are part
of PKT_TX_OFFLOAD_MASK but not included in I40E_TX_OFFLOAD_MASK.
Above patch erroneously includes all PKT_RX_OFFLOAD_ bits in the
I40E_TX_OFFLOAD_NOTSUP_MASK, this is not what is expected.
Restore the initial xor that gives the expected result.
Fixes: 09a62d7569 ("net/i40e: fix offload not supported mask")
Cc: stable@dpdk.org
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When a guest is spanned on multiple NUMA nodes and
multiple Virtio devices are spanned onto these nodes,
we expect that their ring memory is allocated in the
right memory node.
Otherwise, vCPUs from node A may be polling Virtio rings
allocated on node B, which would increase QPI bandwidth
and impact performance.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Since below commit, several tx_prep functions are broken, they fail to
pass supported Tx offload features check:
PKT_TX_IPVx must be set when any PKT_TX_L4 checksum is requested,
but these values are not present in the mask of supported Tx offloads
of several drivers that advertise PKT_TX_L4_MASK.
So any packet sent to those drivers with a L4 checksum request and
one of PKT_TX_IPVx bit set is rejected by the tx prepare function.
Fixes: 1037ed842c ("mbuf: fix Tx offload mask")
Cc: stable@dpdk.org
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch introduces changes for supporting multiprocess support.
This is trivial for VFs but comes with some limitations for the PF.
Due to restrictions when using NFP CPP interface, just one secondary
process is supported by now for the PF.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
The VIC hardware has 64 MAC filters per vNIC, which can be either
unicast or multicast. Use one half for unicast and the other half for
multicast, as the VIC kernel drivers for Linux and Windows do.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Cisco VIC adapters run firmware. Add the fw_version_get handler to
help diagnostics.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Set RTE_ETH_DEV_CLOSE_REMOVE upon probe so rte_eth_dev_close() can
later free port resources including mac_addrs.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
When multiple Chelsio adapters are present, the current naming
convention of using underlying physical port number of the adapter
creates conflicts when allocating control queue mbuf pool for
multiple adapters and hence results in allocation failure. Fix by
using port_id from rte_eth_dev_data, instead of physical port number.
Fixes: 3a3aaabc7c ("net/cxgbe: add control queue to communicate filter requests")
Cc: stable@dpdk.org
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Function mlx5_ctrl_flow_vlan() is used to set the rss rule in
MLX5 PMD, using priv->reta_idx_n as number of Rx queues.
This number is passed to mlx5_flow_validate_action_rss(), which
attempts to access the Rx queues at priv->rxqs.
In case priv->rxqs_n is 0, priv->rxqs is empty, and
mlx5_flow_validate_action_rss() will crash with segmentation fault.
priv->reta_idx_n can never be 0, even if priv->rxqs_n is set to 0.
But when priv->rxqs_n is set to 0, setting the rss rule is invalid.
This patch updates mlx5_ctrl_flow_vlan(), if priv->rxqs_n is 0 the
function will fail with EINVAL errno.
Fixes: 8086cf08b2 ("net/mlx5: handle RSS hash configuration in RSS flow")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Port reset will call i40evf_uninit_vf() to release resource. It wants
to call i40evf_dev_close() to release resources. Before this patch,
hw->adapter_stopped was used to mark the status about start/stop and
close. So it will never call i40evf_dev_close() after stopping the port.
This patch added hw->adapter_closed flag in i40evf_dev_close() and
i40e_dev_close() to control the status of close.
Fixes: 4861cde461 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Zhirun Yan <zhirun.yan@intel.com>
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When starting the device, the RSS table is initialized. So the RSS
update before device_start would be overwritten. This patch allows users
to update the RSS reta table before device_start.
Fixes: db5b65301d ("ethdev: allow to set RSS hash computation flags and/or key")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When starting the device, the RSS table is initialized. So the RSS
update before dev_start would be overwritten. This patch allows users
to update the RSS reta table before dev_start and adjusts the order
to set entries sequentially.
Fixes: 4861cde461 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Device can't function properly with a firmware that is in recovery
mode.
Check the firmware status at initialization time. If the firmware is
in recovery mode, alert the user to check it.
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
RSS hash configure get API (i40e_dev_rss_hash_conf_get()) didn't check
the return value of i40e_get_rss_key().
i40e_dev_rss_hash_conf_get() will return success even getting RSS hash
key failed. This patch fixes the issue.
Fixes: d0a349409b ("i40e: support AQ based RSS config")
Cc: stable@dpdk.org
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The struct should be ifcvf_net_config other than ifcvf_net_device_config
The variable is used as named opaque variable, struct fields are not
accessed at all, so using wrong struct type has no effect but it should
be fixed.
Fixes: a3f8150eac ("net/ifcvf: add ifcvf vDPA driver")
Cc: stable@dpdk.org
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Xiao Wang <xiao.w.wang@intel.com>
tso and vlan parameters were removed from the signature
of txq_mbuf_to_swp function.
The documentation of the function was not updated accordingly.
Remove the tso and vlan documentation to match the function signature.
Fixes: 8f6d9e13a9 ("net/mlx5: remove redundant checks")
Cc: stable@dpdk.org
Signed-off-by: Asaf Penso <asafp@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
If vdev_netvsc is run with debug logging enabled, then the
log output will fill with:
net_vdev_netvsc: interface lo is non-ethernet device
Remove the message since it is not useful.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Matan Azrad <matan@mellanox.com>
Reduced number of INFO logs in BNX2X PMD by converting some INFO
logs to DEBUG and few NOTICE logs to INFO, removing extra new lines,
printing banner bar once for the adapter and device specific info.
Fixes: ba7eeb035a ("net/bnx2x: fix logging to include device name")
Fixes: 540a211084 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
The imissed counters (number of packets dropped because the queues were
full) were actually reported through xstats as "rx_out_of_buffer"
but was not reported through stats.
Following a recent discussion on the ML, as there is no way to tell the
user if a counter is implemented or not, this should be considered a
bug. For example, user looking at imissed will think the packets are
lost before reaching the device.
Signed-off-by: Tom Barbette <barbette@kth.se>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
ixgbe is able to recognize 1G SX and LX id, but it is missing the LHA.
Add it, so that it can handle LHA SFP plugin.
Fixes: d2e72774e5 ("ixgbe/base: support X550")
Cc: stable@dpdk.org
Signed-off-by: Luca Boccassi <bluca@debian.org>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Take the 'other interrupt' into account when setting up
MSI-X interrupts and use the proper mask when enabling it.
Also, rearm the MSI-X vector after the LSC interrupt fires.
This change allows both LSC and RXQ interrupts to work at
the same time when using MSI-X interrupts.
Cc: stable@dpdk.org
Signed-off-by: Timmons C. Player <timmons.player@spirent.com>
Acked-by: Wei Zhao <wei.zhao1@intel.com>
In case of running with not enough capabilities, i.e. running as
non-root user any application linked with DPDK prints the message
about IOPL call failure even if it was just called like
'./testpmd --help'. For example, this breaks most of the OVS unit
tests if it built with DPDK support.
Let's register the virtio driver unconditionally and print error
message while probing the device. Silent iopl() call left in the
constructor to have privileges as early as possible as it was before.
Fixes: 565b85dcd9 ("eal: set iopl only when needed")
Cc: stable@dpdk.org
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The VLAN push action on E-Switch supports only 802.1Q (0x8100)
and 802.1AD (0x88A8) Tag Protocol ID (TPID) insertions. The
parameter check for RTE_FLOW_ACTION_TYPE_OF_PUSH_VLAN action
is added.
Fixes: 57123c00c1 ("net/mlx5: add Linux TC flower driver for E-Switch flow")
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The TCA_FLOWER_KEY_VLAN_ETH_TYPE should be specified for the E-Switch
Flows with VLAN and L3 pattern items in the Netlink messages. The patch
adds missing flower key to the messages. This patch partially reverts to
the code smashed by http://patches.dpdk.org/patch/47781
Fixes: 251e8d02cf ("net/mlx5: add VXLAN to flow translate routine")
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The only time that software should write to the TDH register
is after a reset (hardware reset or CTRL.RST) and
before enabling the transmit function (TXDCTL.ENABLE).
If software were to write to this register while the transmit
function was enabled, the on-chip descriptor buffers might
be invalidated and the hardware could become confused.
Fixes: 029fd06d40 ("ixgbe: queue start and stop")
Cc: stable@dpdk.org
Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Following commit updated the Tx offload mask
commit 1037ed842c ("mbuf: fix Tx offload mask").
So, not having PKT_TX_IPV6 and PKT_TX_IPV4 in qede PMDs supported
Tx offload mask breaks TSO support since application will fail in transmit
prepare function.
Fixes: 1037ed842c ("mbuf: fix Tx offload mask")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
rx_buffer_info should be refill not linearly, but out of order.
IDs should be taken from empty_rx_reqs array.
rx_refill_buffer is introduced to temporary storage
bulk of mbufs taken from pool.
In case of error unused mbufs are put back to pool.
Fixes: c203497667 ("net/ena: add Rx out of order completion")
Cc: stable@dpdk.org
Signed-off-by: Rafal Kozik <rk@semihalf.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
The memcpy operation overwrites the device info fields set
by ethdev API and leaves the device field undefined.
Thus, replaces memcpy by only updating the required fields
at the driver layer.
error log: testpmd> show port info 1
**** Infos for port 1 ****
MAC address: 00:00:00:00:00:00
Device name: net_softnic0
Segmentation fault.
port_infos_display (port_id=1) at /dpdk/app/test-pmd/config.c:418
if (dev_info.device->devargs && dev_info.device->devargs->args)
Fixes: cc6d421574 ("net/softnic: add softnic PMD")
Cc: stable@dpdk.org
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
DCR is Intel internal information, no need to be in public code.
Fixes: de2cd512b1 ("net/i40e/base: new AQ commands for cloud filter")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
When compiling with gcc -O1, this error appears:
drivers/net/mlx4/mlx4_ethdev.c: In function ‘mlx4_rxmode_toggle’:
rte_log.h:321:3: error:
‘mode’ may be used uninitialized in this function
The function mlx4_rxmode_toggle is never called with a value which
is not in the switch block, but GCC complains about it with -O1.
So the default case is "fixed" by setting string "undefined".
Fixes: eacaac7bae ("net/mlx4: restore promisc and allmulti support")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
This patch checks the return value of function
rte_eth_bond_8023ad_agg_selection_set() in bond_ethdev_configure
for error return value.
Fixes: 6d72657ce3 ("net/bonding: add other aggregator modes")
Cc: stable@dpdk.org
Signed-off-by: Lee Daly <lee.daly@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Private vdev was the way previously, when pdump developed, now with
shared device mode on virtual devices, pcap data path in secondary
is not working.
When secondary adds a virtual device, related data transferred to
primary and primary creates the device and shares device back with
secondary. When pcap device created in primary, pcap handlers
(pointers) are process local and they are not valid for secondary
process. This breaks secondary.
So we can't directly share the pcap handlers, but need to create a new
set of handlers for secondary, that's what we done in this patch.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
This is prework for data path enabling for secondary process.
To prevent pcap handler opened by one process be overwritten by
another process, each process should have their private copy,
`rte_eth_dev->process_private` is exactly what we needed.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tx offload mask is updated in following commit 1037ed842c
("mbuf: fix Tx offload mask"). Currently, the new added offload
flags are not supported in PMD and application will fail to call
PMD transmit prepare function.
This patch updates AVF_TX_OFFFLOAD_MASK.
Fixes: 1037ed842c ("mbuf: fix Tx offload mask")
Cc: stable@dpdk.org
Signed-off-by: Zhirun Yan <zhirun.yan@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
When eth_octeontx is initialized before event_octeontx, eth_octeontx
would initiate setting up of the event device with the max ports and
queues available. If number of ports is more than the number of queues,
some ports would be left unused when the ports and queues are mapped
1:1. But even in that case the ports need to be setup, or otherwise it
would lead to a segmentation fault when event device is started.
Fixes: f7be70e513 ("net/octeontx: add net device probe and remove")
Cc: stable@dpdk.org
Signed-off-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
When queues are stopped release Tx buffers.
During start initialize array of empty Tx/Rx reqs with default values.
Fixes: df238f84c0 ("net/ena: recreate HW IO rings on start and stop")
Cc: stable@dpdk.org
Signed-off-by: Rafal Kozik <rk@semihalf.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
Update the mlx5_flow_validate_item_mpls() function to allow
MPLS over IP, UDP, and GRE.
Modify the flow_dv_validate() function with the new logic introduced
in previous patch of this series: set new variable last_item
after each validation, update item_flags after each item iteration.
The new variable last_item is sent to mlx5_flow_validate_item_mpls()
and used to validate the MPLS item.
Same change implemented in flow_verbs_validate().
Update the mlx5_flow_validate_item_mpls() function to verify that
device configuration has mpls_en set to 1.
This code was added earlier this year, but unintentionaly removed
in recent versions.
Fixes: 84c406e745 ("net/mlx5: add flow translate function")
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The support in MPLS on this flow engine was overlooked. It's absence is
critical because there are required actions for MPLS which can be done
only with the DV engine.
To set correctly the MPLS filter, we need to reason about the flow item
before the MPLS (UDP, GRE or other).
To do that, a new variable last_item was added and updated after each
translation. the full item flags are updated after each item iteration.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Unnecessary volatile attribute keeps compiler from further optimizing the
code and this results in a little performance drop (~2%). Because of memory
barriers, it is safe to remove.
Fixes: 6bf10ab69b ("net/mlx5: support 32-bit systems")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
There's some performance drop due to extra condition checks on the
datapath. Checking for external memory registration should be consolidated
to the existing bottom-half.
Fixes: 7e43a32ee0 ("net/mlx5: support externally allocated static memory")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
There's some performance drop due to extra condition checks on the
datapath. Checking for external memory registration should be consolidated
to the existing bottom-half.
Fixes: 31912d9924 ("net/mlx4: support externally allocated static memory")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The flow_dv_query() just returns -ENOTSUP value and does not
set provided error parameter structure, that crashes the
port_flow_query(). The patch fixes flow_db_query(), now it
sets an error parameter structure.
Fixes: 684dafe795 ("net/mlx5: add flow query abstraction interface")
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
This patch fixes compilation errors with meson and the clang
compiler caused by some of the struct members not being
initialized.
```
../drivers/net/mlx5/mlx5_mr.c:345:37: error: missing field 'end'
initializer [-Werror,-Wmissing-field-initializers]
struct mlx5_mr_cache entry = { 0, };
^
../drivers/net/mlx5/mlx5_mr.c:389:36: error: missing field 'end'
initializer [-Werror,-Wmissing-field-initializers]
struct mlx5_mr_cache ret = { 0, };
^
../drivers/net/mlx5/mlx5_mr.c:691:35: error: missing field 'end'
initializer [-Werror,-Wmissing-field-initializers]
struct mlx5_mr_cache ret = { 0, };
^
```
The compilation errors reproduce with
clang version 3.4.2 (tags/RELEASE_34/dot2-final) on RHEL.
Fixes: e1114ff6a5 ("net/mlx5: support e-switch flow count action")
Fixes: db48f9db5d ("net/mlx5: support new flow counter API")
Fixes: 974f1e7ef1 ("net/mlx5: add new memory region support")
Fixes: 65c9d24170 ("net/mlx5: enable loopback by configured mode")
Fixes: 87011737b7 ("mlx5: add software counters")
Cc: stable@dpdk.org
Signed-off-by: Ali Alnubani <alialnu@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
This patch fixes compilation errors with meson and the clang
compiler caused by some of the struct members not being
initialized.
```
../drivers/net/mlx4/mlx4_mr.c:357:37: error: missing field 'end'
initializer [-Werror,-Wmissing-field-initializers]
struct mlx4_mr_cache entry = { 0, };
^
../drivers/net/mlx4/mlx4_mr.c:401:36: error: missing field 'end'
initializer [-Werror,-Wmissing-field-initializers]
struct mlx4_mr_cache ret = { 0, };
^
../drivers/net/mlx4/mlx4_mr.c:691:35: error: missing field 'end'
initializer [-Werror,-Wmissing-field-initializers]
struct mlx4_mr_cache ret = { 0, };
^
```
The compilation errors reproduce with
clang version 3.4.2 (tags/RELEASE_34/dot2-final) on RHEL.
Fixes: 9797bfcce1 ("net/mlx4: add new memory region support")
Cc: stable@dpdk.org
Signed-off-by: Ali Alnubani <alialnu@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
This patch adds the in_hw flag check for tc flower filter rules.
If rule is applied without skip_sw flag set driver should check
whether the in_hw flag is set after rule applying. If no in_hw
flag set found it means the rule is not hardware offloaded and
error should be returned to application.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The tc flower filter rules are used to control E-switch from
the application side. In order to gain garanteed rule hardware
offload the skip_sw flag should be specified while applying the
rule. But some tc rules is rejected by kernel if skip_sw flag
is set by design. Currently this regards VXLAN tunneling rules,
which are applied to special VXLAN virtual devices. Albeit these
rules are applied with skip_sw flag reset kernel tries to
perform hardware offload. If kernel succeeded the in_hw flag
is set in rule properties and application should check this
flag to get know whether the applied rule is actually hardware
offloaded.
This patch prepares for the rule flags query and check in_hw flag.
The driver checks only the rules with skip_sw flag reset, so we
need to test the actual flags of rule is being applied. The pointer
to flags field into translated rule is introduced and flags are
tested directly in the rule body. It is more reliable than save and
check flags copy.
Also patch swaps the flow_tcf_apply() and flow_tcf_remove(),
we are going to call flow_tcf_remove() from flow_tcf_appy() if
no in_hw flag set found in applied rule.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
While receiving the Netlink reply messages we should stop at DONE
or ACK message. The existing implementation stops at DONE message
or if no multiple message flag set ( NLM_F_MULTI). It prevents
the single query requests from working, these requests send the
single reply message without multi-message flag followed by
ACK message. This patch fixes receiving part of Netlink
communication routine.
Fixes: 6e74990b34 ("net/mlx5: update E-Switch VXLAN netlink routines")
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
This patch removes the unused message length parameter, we
do not send multiple commands in the single message anymore,
message length can be taken from the prepared message header,
so length parameter can be removed.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The assignment should be done after initialization, or it will be zero.
Fixes: 264b23e3d2 ("net/i40e: add parameter check for RSS flow init")
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
As the code has changed the max wait time to 1000ms, the comment should
be changed accordingly.
Fixes: 64f1c8539c ("net/ixgbe: wait longer for link after fiber MAC setup")
Cc: stable@dpdk.org
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
There's an issue that X710 can't receive any packet after
reading some special registers. That's because these
registers are only valid for X722, read access for non-X722
will cause ECC error.
Fixes: d9efd0136a ("i40e: add EEPROM and registers dumping")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
There need an parameter check for RSS flow init, or it may cause
core dump if pointer is NULL in memory copy.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
For ixgbevf kernel driver, link status changes from down to up
will trigger vf kernel driver send IXGBE_VF_RESET message to pf
kernel driver, after this, vf kernel driver will disable and enable
it self. By these series operations, the vf kernel driver report
link up. Besides, all these operations handles in kernel thread.
For DPDK user space driver, it only gets link status changes from
down to up, but miss IXGBE_VF_RESET message sending and reset itself.
If we will add fully implementation of link status change for DPDK
user space driver, we need take much more modification. We have
aligned that for link status changes from down to up we only notify
link is up, users need to reset vf port.
Fixes: dc66e5fd01 ("net/ixgbe: improve link state check on VF")
Cc: stable@dpdk.org
Signed-off-by: Rosen Xu <rosen.xu@intel.com>
Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
As mlx5_flow_hashfields_adjust() refers to flow->rss, actions must be
translated prior to items like in Verbs. Otherwise, hash fields are not
correctly set.
Fixes: d02cb06912 ("net/mlx5: add Direct Verbs translate actions")
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The current code wrongly assumes that packets are non-TSO and ends up
rejecting large TSO packets. Check non-TSO and TSO max packet sizes
separately.
Fixes: 5a12c38740 ("net/enic: check maximum packet size in Tx prepare handler")
Cc: stable@dpdk.org
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Fields in the struct efx_filter_spec_t starting from efs_outer_vid
are hashed for software filter lookup. efs_mark is not a matching
criteria. Exclude efs_mark from hash.
Fixes: 5f78af5239 ("net/sfc: support MARK and FLAG actions in flow API")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Tunneling offloads are represented by multi-bit values. So, feature
wise tunneling offload can only be entirely supported/unsupported
using PKT_TX_TUNNEL_MASK. Its upon PMDs to further isolate which of
the tunneling offload types are supported by respective PMD.
Using subset of bits from PKT_TX_TUNNEL_MASK to indicate supported vs
unsupported offloads can lead to undesired result.
Use PKT_TX_TUNNEL_MASK in QEDE_TX_OFFLOAD_MASK and use independent
value of supported PKT_TX_TUNNEL_* in .tx_pkt_prepare() to mark
supported tunnel offloads.
Fixes: 44346c24b7 ("net/qede: fix VXLAN tunnel Tx offload flag setting")
Cc: stable@dpdk.org
Suggested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
Reviewed-by: Rasesh Mody <rasesh.mody@cavium.com>
When the priv_size of the mbuf is > 128 bytes, the mbuf would not be
properly constructed. This would lead to a corrupt mbuf.
This patch fixes the issue by accounting for
rte_pktmbuf_priv_size(pool) and RTE_PKTMBUF_HEADROOM
while configuring first skip register calculation.
Fixes: 197438ee9f ("net/octeontx: add Rx queue setup and release ops")
Cc: stable@dpdk.org
Suggested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
Signed-off-by: Nitin Saxena <nitin.saxena@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The ethdev flag RTE_ETH_DEV_CLOSE_REMOVE is set for drivers
having migrated to the new behaviour of rte_eth_dev_close().
As any other flag, it can be useful to know about its value
as soon as the port is probed.
Unfortunately, it was set inside the close operation,
just before being erased by memset() in rte_eth_dev_release_port().
The flag assignment is moved to the probing stage, so it can
be checked by the application in order to anticipate the behaviour.
Fixes: 42603bbdb5 ("net/mlx5: release port on close")
Fixes: 6c99085d97 ("net/vmxnet3: fix hot-unplug")
Fixes: 4d7877fde2 ("net/ena: remove resources when port is being closed")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Luca Boccassi <bluca@debian.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Currently, if configuration fails (for example if a 100G card is used
with an odd number of RX/TX queues) QEDE crashes due to a null pointer
dereference.
This commit fixes it by checking that the pointer is not NULL before
using it.
Fixes: 7105b24f4b ("net/qede: fix memory alloc for multiple port reconfig")
Cc: stable@dpdk.org
Signed-off-by: Timothy Redaelli <tredaelli@redhat.com>
Acked-by: Rasesh Mody <rasesh.mody@cavium.com>
If rule contains tunneling action (like VXLAN encapsulation)
the VTEP (Virtual Tunneling EndPoint) device is pre-configured
before applying the rule. If kernel returns an error this
VTEP configuration should be rolled back to the origin state.
The patch adds the missing VTEP configuration restoration.
Fixes: 95a464cecc ("net/mlx5: add E-switch VXLAN tunnel devices management")
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
The VXLAN related rule cleanup routine queries and gathers all
existing local IP and neigh rules into buffer list. One buffer
may contain multiple rule deletion commands and is prepared
to send into Netlink as single message. But, if error occurs
for some deletion commands in the buffer, the multiple ACK
message with errors can be send back by the kernel. It breaks
the Netlink communication sequence numbers, because we expect
only one ACK message and it smashes out futher Netlik
communication.
The workaround of this problem is to send rule deletion commands
from buffer in one-by-one fashion and get ACK message for every
command sent. We do not expect too may rules preexist, so there
should not be critical performance degradation at VXLAN outer
interface initialization.
Fixes: f420f03d67 ("net/mlx5: add E-switch VXLAN rule cleanup routines")
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
This patch is preparation for the following fix, we are going to send
Netlink message from buffer in one-by-one fashion. It is highly
desirable to check multimessage buffer consistency for debug purposes.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
The Netlink message buffer is allocated and there is the typo,
the other pointer is checked instead of returned one. If no
memory is allocated and NULL is returned by allocation routine
the bug causes segmentation fault. The patch fixes typo,
returned pointer is validated.
Fixes: f420f03d67 ("net/mlx5: add E-switch VXLAN rule cleanup routines")
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Don't fail the build if pkg-config can't be found, instead print the
linker flag as it was doing before the change.
Fixes: b6b8793919 ("net/mlx5: use pkg-config to handle SUSE libmnl")
Cc: stable@dpdk.org
Reported-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Fix the flow_fdir_cmp() function, used by flow_fdir_filter_lookup().
This function is used by flow_fdir_filter_add() to check if same rule
exists, and by flow_fdir_filter_delete() to find flow rule to delete.
The function compared actions conf pointers, changed to compare
actions type only.
Fixes: 2720f833d4 ("net/mlx5: add missing flow director delete")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
When stopping a bonded port all slaves are deactivated. Attempting
to deactivate a slave that was never activated will result in a segfault
when mode 4 is used.
Fixes: 7486331308 ("net/bonding: stop and deactivate slaves on stop")
Cc: stable@dpdk.org
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Chas Williams <chas3@att.com>
In general the VF driver should not access the chip. For VF link status
update, VF driver should not use HW lock, use bnx2x_link_report_locked()
instead.
Add few prints for releasing previously held HW locks.
Fixes: a9b58b15ed ("net/bnx2x: fix to add PHY lock")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Use rte_log() rather than RTE_LOG() for dynamic logging. Rearrange
dynamic log types to the top and configurable log types to bottom.
Remove unused RTE_LIBRTE_BNX2X_DEBUG_TX_FREE
Fixes: ba7eeb035a ("net/bnx2x: fix logging to include device name")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
For performance reasons, word1 of send_hdr_s
sub descriptor was not cleared assuming it is always
having default value of zero since it comes from fixed
offsets of SQ buffer.
This is causing issues in case of SG mode because,
the size of send command might change and hence the word1
of send_hdr_s is not always at fixed offsets of the SQ buffer
and hence not having default value of zero.
This fixes the issue by clearing the word1 in case of SG mode
for every packet.
Fixes: 1c421f18e0 ("net/thunderx: add single and multi-segment Tx")
Cc: stable@dpdk.org
Signed-off-by: Subrahmanyam Nilla <snilla@caviumnetworks.com>
Signed-off-by: Nithin Dabilpuram <nithin.dabilpuram@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Individual MPS TCAM entries are not allocated as separate entities.
All entries are allocated once as an array. So, fix bug with attempting
to free illegal memory location.
Also add missing MPS TCAM initialization for CXGBEVF.
Fixes: 6fda3f0ddd ("net/cxgbe: add API to program hardware MPS table")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Set the "value" in the filter spec and not the "mask". Also, remove
duplicate comparison for hardware supported match items already done
earlier.
Fixes: af44a57798 ("net/cxgbe: support to offload flows to HASH region")
Cc: stable@dpdk.org
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Under heavy load, flow related operations can take more time to
complete. Increase max completion wait time to 10 seconds. Also
increase max receive budget to read more replies from firmware
in every cycle.
Fixes: 9eb2c9a480 ("net/cxgbe: implement flow create operation")
Cc: stable@dpdk.org
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Fix issue where ethertype is set to 0x800 for IPv4 by ether match
item and IPv4 match item also inherently sets ethertype to 0x800.
Current logic returns error when IPv4 match item is parsed. So, fix
by only bailing if the redefined match items have different values.
Fixes: ee61f5113b ("net/cxgbe: parse and validate flows")
Cc: stable@dpdk.org
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
The AltiVec header file breaks boolean type:
error: incompatible types when initializing type
'__vector _bool int' {aka '_vector(4) __bool int'} using type 'int'
If __APPLE_ALTIVEC__ is defined, then bool type is redefined
and conflicts with stdbool.h.
There is no good solution to fix it for the whole project without
breaking something else, so a workaround is inserted in mlx5 PMD.
This workaround is not compatible with C++ but there is no C++ in DPDK.
Suggested-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Suggested-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Tested-by: David Wilder <dwilder@us.ibm.com>
Acked-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
This patch fixes the variable 'phy_word' may be used uninitialized.
Fixes: 5b6439cf03 ("e1000/base: support different EEARBC for i210")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
In scenarios for multiq or flowq setup failure
`rte_eth_dev_probing_finish()` has to be invoked for successful device
registration.
Fixes: fbe90cdd77 ("ethdev: add probing finish function")
Cc: stable@dpdk.org
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
- Currently, no device supports partial mask for protocol in IP header.
- As there could be multiple IP items, next_protocol variable in flow
validation has to be reset for inner layer. Otherwise, inner TCP/UDP
will see protocol number of outer IP header.
- Remove redundant protocol checking for MPLS, which is done in
mlx5_flow_validate_item_mpls().
Fixes: 3d69434113 ("net/mlx5: add Direct Verbs validation function")
Fixes: 23c1d42c71 ("net/mlx5: split flow validation to dedicated function")
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
dev_flow->verbs is mistakenly used instead of dev_flow->dv. A sanity
check is added for debugging purpose.
Fixes: fc2c498ccb ("net/mlx5: add Direct Verbs translate items")
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Static analysis tools don't like the fact that fd could be zero
in the error path. This won't happen in real world because
stdin would have to be closed, then other error occurring.
Coverity issue: 14079
Fixes: 02f96a0a82 ("net/tap: add TUN/TAP device PMD")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Some toolchain has fls() definition in string.h as argument type int,
which is conflicting uint32_t argument type.
/export/dpdk.org/lib/librte_eal/common/rte_reciprocal.c:47:19:
error: conflicting types for ‘fls’
static inline int fls(uint32_t x)
^~~
/opt/marvell-tools-201/aarch64-marvell-elf/include/strings.h:59:6:
note: previous declaration of ‘fls’ was here
int fls(int) __pure2;
FreeBSD string.h also has fls() with argument as int type.
https://www.freebsd.org/cgi/man.cgi?query=fls&sektion=3
Fixing the conflict by using rte version of fls.
Fixes: ffe3ec811e ("sched: introduce reciprocal divide")
Fixes: faf2b25c9f ("fm10k: support VMDQ in multi-queue configuration")
Cc: stable@dpdk.org
Suggested-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The netvsc device calls VF (if present) to update the link status
with the wrong device. This leads to errors in mlx5 device when it
can't find the ifindex.
Fixes: dc7680e859 ("net/netvsc: support integrated VF")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
ag_cons is used uninitialized, it is used when DEBUG enabled, remove
debug code.
Fixes: 0958d8b643 ("net/bnxt: support LRO")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Previously, there is instability during vector Rx if descriptor
number is not power of 2, e.g. process hang and some Rx packets
are unexpectedly empty. That's because vector Rx mode assumes Rx
descriptor number is power of 2 when doing bit mask.
This patch allows vector mode only when the number of Rx descriptor
is power of 2.
Fixes: 8e109464c0 ("i40e: allow vector Rx and Tx usage")
Fixes: a3c83a2527 ("net/i40e: enable runtime queue setup")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch adds support for the rx_queue_count API in mlx5 driver
Signed-off-by: Tom Barbette <barbette@kth.se>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Tx offload mask is updated in following commit 1037ed842c
("mbuf: fix Tx offload mask") Currently, the new added offload
flags are not supported in PMD and application will fail to call
PMD transmit prepare function.
This patch updates IGB_TX_OFFFLOAD_MASK.
Fixes: 1037ed842c ("mbuf: fix Tx offload mask")
Cc: stable@dpdk.org
Signed-off-by: Zhirun Yan <zhirun.yan@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Even though flow_drv_prepare() takes item_flags and action_flags to be
filled in, those are not used and will be overwritten by parsing of
flow_drv_translate(). There's no reason to keep the flags and fill it.
Appropriate notes are added to the documentation of flow_drv_prepare() and
flow_drv_translate().
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
1) Fix layer parsing
In translation of tunneled flows, dev_flow->layers must not be used to
check tunneled layer as it contains all the layers parsed from
flow_drv_prepare(). Checking tunneled layer is needed to distinguish
between outer and inner item. This should be based on dynamic parsing. With
dev_flow->layers on a tunneled flow, items will always be interpreted as
inner as dev_flow->layer already has all the items. Dynamic parsing
(item_flags) is added as there's no such code.
2) Refactoring code
- flow_dv_create_item() and flow_dv_create_action() are merged into
flow_dv_translate() for consistency with Verbs and *_validate().
Fixes: 2466364115 ("net/mlx5: fix flow tunnel handling")
Fixes: d02cb06912 ("net/mlx5: add Direct Verbs translate actions")
Fixes: fc2c498ccb ("net/mlx5: add Direct Verbs translate items")
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
1) Fix layer parsing
In translation of tunneled flows, dev_flow->layers must not be used to
check tunneled layer as it contains all the layers parsed from
flow_drv_prepare(). Checking tunneled layer is needed to set
IBV_FLOW_SPEC_INNER and it should be based on dynamic parsing. With
dev_flow->layers on a tunneled flow, items will always be interpreted as
inner as dev_flow->layer already has all the items.
2) Refactoring code
It is partly because flow_verbs_translate_item_*() sets layer flag. Same
code is repeating in multiple locations and that could be error-prone.
- Introduce VERBS_SPEC_INNER() to unify setting IBV_FLOW_SPEC_INNER.
- flow_verbs_translate_item_*() doesn't set parsing result -
MLX5_FLOW_LAYER_*.
- flow_verbs_translate_item_*() doesn't set priority or adjust hashfields
but does only item translation. Both have to be done outside.
- Make more consistent between Verbs and DV.
3) Remove flow_verbs_mark_update()
This code can never be reached as validation prohibits specifying mark and
flag actions together. No need to convert flag to mark.
Fixes: 84c406e745 ("net/mlx5: add flow translate function")
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Applications which add RSS rules must supply an RSS key and length.
If an application is only interested in default RSS operation it
should not care about the exact RSS key.
By setting the key to NULL - the PMD will use the default RSS key.
In addition if the application does not care about the RSS type it can
set it to 0 and the PMD will use the default type (ETH_RSS_IP).
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Due to a limitation on driver/FW, priority ranges from 1 to 16 in kernel.
Priority in rte_flow attribute starts from 0 and is added by 1 in
translation. This is subject to be changed to determine the max priority
based on trial-and-error like Verbs driver once the restriction is lifted
or the range is extended.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Add txqs_max_vec parameter to configure the maximum number of Tx queues to
enable vectorized Tx. And its default value is set according to the
architecture and device type.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
When a device is spawned, it does make more sense that the configuration
parameters are passed by callee. Furthermore, setting default value for
some configuration would need PCIe device ID which can be found in the
probe function.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The last part of patchset contains the rule cleanup routines.
These ones is the part of outer interface initialization at
the moment of VXLAN VTEP attaching. These routines query
the list of attached VXLAN devices, the list of local IP
addresses with peer and link scope attribute and the list
of permanent neigh rules, then all found abovementioned
items on the specified outer device are flushed.
Suggested-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
VXLAN encap rules are applied to the VF ingress traffic and have the
VTEP as actual redirection destinations instead of outer PF.
The encapsulation rule should provide:
- redirection action VF->PF
- VF port ID
- some inner network parameters (MACs/IP)
- the tunnel outer source IP (v4/v6)
- the tunnel outer destination IP (v4/v6). Current
- VNI - Virtual Network Identifier
There is no direct way found to provide kernel with all required
encapsulatioh header parameters. The encapsulation VTEP is created
attached to the outer interface and assumed as default path for
egress encapsulated traffic. The outer tunnel IP address are
assigned to interface using Netlink, the implicit route is
created like this:
ip addr add <src_ip> peer <dst_ip> dev <outer> scope link
Peer address provides implicit route, and scode link reduces
the risk of conflicts. At initialization time all local scope
link addresses are flushed from device (see next part of patchset).
The destination MAC address is provided via permenent neigh rule:
ip neigh add dev <outer> lladdr <dst_mac> to <dst_ip> nud permanent
At initialization time all neigh rules of this type are flushed
from device (see the next part of patchset).
Suggested-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
VXLAN interfaces are dynamically created for each local UDP port
of outer networks and then used as targets for TC "flower" filters
in order to perform encapsulation. These VXLAN interfaces are
system-wide, the only one device with given UDP port can exist
in the system (the attempt of creating another device with the
same UDP local port returns EEXIST), so PMD should support the
shared device instances database for PMD instances. These VXLAN
implicitly created devices are called VTEPs (Virtual Tunnel
End Points).
Creation of the VTEP occurs at the moment of rule applying. The
link is set up, root ingress qdisc is also initialized.
Encapsulation VTEPs are created on per port basis, the single
VTEP is attached to the outer interface and is shared for all
encapsulation rules on this interface. The source UDP port is
automatically selected in range 30000-60000.
For decapsulaton one VTEP is created per every unique UDP
local port to accept tunnel traffic. The name of created
VTEP consists of prefix "vmlx_" and the number of UDP port in
decimal digits without leading zeros (vmlx_4789). The VTEP
can be preliminary created in the system before the launching
application, it allows to share UDP ports between primary
and secondary processes.
Suggested-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
The counters for E-Switch rules were erroneously deleted in
flow_tcf_remove() routine. The counters deletion is moved to
flow_tcf_destroy() routine.
Fixes: e1114ff6a5 ("net/mlx5: support e-switch flow count action")
Suggested-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
This part of patchset updates Netlink exchange routine. Message
sequence numbers became not random ones, the multipart reply messages
are supported, not propagating errors to the following socket calls,
Netlink replies buffer size is increased to MNL_SOCKET_BUFFER_SIZE
and now is preallocated at context creation time instead of stack
usage. This update is needed to support Netlink query operations.
Suggested-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
This part of patchset adds support of VXLAN-related items and
actions to the flow translation routine. Later some tunnel types,
other than VXLAN can be addedd (GRE). No VTEP devices are created at
this point, the flow rule is just translated, not applied yet.
Suggested-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
The e-switch Flow prepare function is updated to support VXLAN
encapsulation/and decapsulation actions. The function calculates
buffer size for Netlink message and Flow description structures,
including optional ones for tunneling purposes.
Suggested-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
This patch adds VXLAN support for flow item/action lists validation.
The following entities are now supported:
- RTE_FLOW_ITEM_TYPE_VXLAN, contains the tunnel VNI
- RTE_FLOW_ACTION_TYPE_VXLAN_DECAP, if this action is specified
the items in the flow items list treated as outer network
parameters for tunnel outer header match. The ethernet layer
addresses always are treated as inner ones.
- RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP, contains the item list to
build the encapsulation header. In current implementation the
values is the subject for some constraints:
- outer source MAC address will be always unconditionally
set to the one of MAC addresses of outer egress interface
- no way to specify source UDP port
- all abovementioned parameters are ignored if specified
in the rule, warning messages are sent to the log
Minimal tunneling support is also added. If VXLAN decapsulation
action is specified the ETH item can follow the VXLAN VNI item,
the content of this ETH item is treated as inner MAC addresses
and type. The outer ETH item for VXLAN decapsulation action
is always ignored.
Suggested-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
The rule validation function for E-Switch checks item list first,
then action list is checked. This patch swaps the validation order,
now actions are checked first. This is preparation for validation
function update with VXLAN tunnel actions. VXLAN decapsulation
action requires to check the items in special way. We could do
this special check in the single item check pass if the action
flags were gathered before. This is the reason to swap the
item/actions checking loops.
Suggested-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
This patch introduces the data structures needed to implement VXLAN
encapsulation/decapsulation hardware offload support for E-Switch.
Suggested-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
This patch contains tc flower related and some other definitions
needed to implement VXLAN encapsulation/decapsulation hardware
offload support for E-Switch.
mlx5 driver dynamically creates and manages the VXLAN virtual
tunnel endpoint devices, the following definitions control
the parameters of these network devices:
- MLX5_VXLAN_PORT_MIN - minimal allowed UDP port for VXLAN device
- MLX5_VXLAN_PORT_MAX - maximal allowed UDP port for VXLAN device
- MLX5_VXLAN_DEVICE_PFX - name prefix of driver created VXLAN device
The mlx5 drivers creates the VXLAN devices with UDP port within
specified range, devices have the names with specified prefix,
followed by decimal digits of UDP port.
Suggested-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
This patch updates meson.build before adding E-Switch VXLAN
encapsulation/decapsulation hardware offload support.
E-Switch rules are controlled via tc Netilnk commands,
so we need to include tc related headers, and check for
some tunnel specific key definitions.
Suggested-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
This patch updates makefile before adding E-Switch VXLAN
encapsulation/decapsulation hardware offload support.
E-Switch rules are controlled via tc Netilnk commands,
so we need to include tc related headers, and check for
some tunnel specific key definitions.
Suggested-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
After the patch below the call to rte_eth_bond_8023ad_agg_selection_set
from probe() segfaults; there is no need to call the function, just set
the mode directly.
Also, reverted 1620175b40.
Fixes: 391797f042 ("drivers/bus: move driver assignment to end of probing")
Fixes: 1620175b40 ("net/bonding: fix invalid port id")
Cc: stable@dpdk.org
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Chas Williams <chas3@att.com>
The new API introduced in 18.11 is suggesting, that the driver should
release all it's resources at the dev_close routine.
All resources previously released in uninit routine during PCI removal,
are now being released at the dev_close and the PMD is indicating that
it is supporting API changes by setting RTE_ETH_DEV_CLOSE_REMOVE flag.
As the device is not allocating MAC addresses dynamically, it is setting
mac_addrs field to NULL, so it wouldn't be released by the
rte_eth_dev_release_port().
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
During initialization of leading PF, we need to initialize HW for LLH
filters. Set HW init parameter to set the engine affinity for
multiple engine adapters.
Fixes: 3eed444a96 ("net/qede/base: changes for 100G")
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
.dev_uninit calls .dev_stop and .dev_close. The work that is done in
those routines doesn't need repeated. Use started and opened to track
the adapter's status.
Fixes: c1f86306a0 ("virtio: add new driver")
Cc: stable@dpdk.org
Signed-off-by: Chas Williams <ciwillia@brocade.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
If the multispeed fiber link is in DOWN state, ixgbe_setup_link
could take around a second of busy polling. This is highly
inconvenient for the case where single thread periodically
checks the link statuses. For example, OVS main thread
periodically updates the link statuses and hangs for a really
long time busy waiting on ixgbe_setup_link() for a DOWN fiber
ports. For case with 3 down ports it hangs for a 3 seconds and
unable to do anything including packet processing.
Fix that by shifting that workaround to a separate thread by
alarm handler that will try to set up link if it is DOWN.
Fixes: c12d22f65b ("net/ixgbe: ensure link status is updated")
Cc: stable@dpdk.org
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Make flow encap and decap Verbs actions cacheable resources.
Store created actions in local database.
This enables MLX5 PMD reuse of existing actions.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
This patch implements the encap and decap actions, using raw data,
in DV flow for MLX5 PMD.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
This patch implements the NVGRE decap action in DV flow for MLX5 PMD.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
This patch implements the nvgre encap action in DV flow for MLX5 PMD.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
This patch implements the VXLAN decap action in DV flow for MLX5 PMD.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
This patch implements the VXLAN encap action in DV flow for MLX5 PMD.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Multiple tunnel isn't allowed but MPLS over GRE should be accepted.
Fixes: 23c1d42c71 ("net/mlx5: split flow validation to dedicated function")
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Deleting FDIR flow is not implemented by mistake. Also the name of static
functions are properly renamed.
Fixes: b42c000e37 ("net/mlx5: remove flow support")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
We need to check the status field in virtio net config structure
instead of the bits read from ISR register to know whether we need
to do guest announce.
Fixes: 7365504f77 ("net/virtio: support guest announce")
Cc: stable@dpdk.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Get rid of the duplicated code in device features preparation
which looks awful.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
We need to save the supported frontend features (which won't be
announced by vhost backend), otherwise we will lost them when the
connection to vhost-user backend is established in server mode.
Fixes: 201a416517 ("net/virtio-user: fix multiple queues fail in server mode")
Cc: stable@dpdk.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
When driver resets the device, virtio-user just needs to send
GET_VRING_BASE messages to stop the vhost backend, and that's
what QEMU does. With this change, we won't need to set owner
when starting virtio-user device anymore. This will help us to
get rid of below error message on startup:
vhost_kernel_ioctl(): VHOST_SET_OWNER failed: Device or resource busy
Fixes: bce7e9050f ("net/virtio-user: fix start with kernel vhost")
Fixes: 0d6a8752ac ("net/virtio-user: fix crash as features change")
Cc: stable@dpdk.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
There is no need to make the vhost user channel nonblock, and
making it nonblock will make vhost_user_read() fail with EAGAIN
when vhost messages need a reply.
Fixes: bd8f50a45d ("net/virtio-user: support server mode")
Cc: stable@dpdk.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Without this change, virtio-user still works, but it will show
annoying error messages like this on shutdown:
vhost_kernel_set_backend(): VHOST_NET_SET_BACKEND fails, Operation not permitted
vhost_kernel_ioctl(): VHOST_RESET_OWNER failed: Operation not permitted
Fixes: e3b434818b ("net/virtio-user: support kernel vhost")
Fixes: 12ecb2f63b ("net/virtio-user: support memory hotplug")
Cc: stable@dpdk.org
Reported-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Drop the duplicated reset() method in virtio_pci_ops. Currently
vtpci_reset() is implemented on set_status() and get_status()
directly. The reset() method in virtio_pci_ops isn't used and
its implementation in the legacy device isn't right.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
A PMD parameter (rxq_cqe_pad_en) is added to enable 128B padding of CQE on
RX side. The size of CQE is aligned with the size of a cacheline of the
core. If cacheline size is 128B, the CQE size is configured to be 128B even
though the device writes only 64B data on the cacheline. This is to avoid
unnecessary cache invalidation by device's two consecutive writes on to one
cacheline. However in some architecture, it is more beneficial to update
entire cacheline with padding the rest 64B rather than striding because
read-modify-write could drop performance a lot. On the other hand, writing
extra data will consume more PCIe bandwidth and could also drop the maximum
throughput. It is recommended to empirically set this parameter. Disabled
by default.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The Flow counters created with Verbs are erroneously destroyed
in Flow remove function (flow_verbs_remove()). Counter Verbs
handles stored in the translated rule buffer become invalid.
If rule is reapplied with these invalid counter handles the
driver hangs.
The counter should be destroyed with Verbs in the Flow destroy
function. The Flow remove function should keep counters intact.
Fixes: 60bd8c9747 ("net/mlx5: add count flow action")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
1. The check for the Eth item was wrong. causing an error with
flow rules like:
flow create 0 ingress pattern eth / vlan vid is 13 / ipv4 / gre / eth /
vlan vid is 15 / end actions drop / end
2. align all error messages.
3. align multiple item layers check.
Fixes: 23c1d42c71 ("net/mlx5: split flow validation to dedicated function")
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Apply the changes from commit c744f6b1b969 ("net/mlx5: fix bit width of
item and action flags") in some places that were overlooked.
Fixes: 0ddd11437a ("net/mlx5: fix bit width of item and action flags")
Fixes: 23c1d42c71 ("net/mlx5: split flow validation to dedicated function")
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
SUSE decided to install the libmnl include file in a non-standard
place: /usr/include/libmnl/libmnl/libmnl.h
This was probably a mistake by the SUSE package maintainer,
but hard to get fixed. Workaround the problem by pkg-config to find
the necessary include directive for libmnl.
Fixes: 20b71e92ef ("net/mlx5: lay groundwork for switch offloads")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Just as the name I40E_TX_OFFLOAD_NOTSUP_MASK indicates, it should be the
mask of unsupported features (either not in PKT_TX_OFFLOAD_MASK or in
I40E_TX_OFFLOAD_MASK), however, xor will not get desired result here,
assume bit 0 of PKT_TX_OFFLOAD_MASK and I40E_TX_OFFLOAD_MAKS are 0 which
means corresponding feature is not supported in both sides, then we get
value of bit 0 of I40E_TX_OFFLOAD_NOTSUP_MASK which is 0 via xor, it
implies that it is supported which doesn't meet our expectation.
Correct it by a NOT-AND operation.
Fixes: 3f33e643e5 ("net/i40e: add Tx preparation")
Cc: stable@dpdk.org
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Since we have enabled the hotplug mechanism for multi-process, it's not
necessary to return -EPERM when try detaches a device from a secondary
process.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Current name rte_eal_check_dma_mask does not follow the naming
used in the rest of the file.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
The vmxnet3 driver can't call back into dev_close(), and possibly
dev_stop(), in dev_uninit(). When dev_uninit() is called, anything
that those routines would want to clean up has already been released.
Further, for complete cleanup, it is necessary to release any of the
queue resources during dev_close().
This allows a vmxnet3 device to be hot-unplugged without leaking
queues.
Also set RTE_ETH_DEV_CLOSE_REMOVE on close so that the port resources
can be deallocated.
Return EBUSY if remove is called before stop.
Fixes: dfaff37fc4 ("vmxnet3: import new vmxnet3 poll mode driver implementation")
Cc: stable@dpdk.org
Signed-off-by: Brian Russell <brussell@brocade.com>
Signed-off-by: Luca Boccassi <bluca@debian.org>
Register and unregister the virtio interrupt handler when the device is
started and stopped. This allows a virtio device to be hotplugged or
unplugged.
Fixes: c1f86306a0 ("virtio: add new driver")
Cc: stable@dpdk.org
Signed-off-by: Brian Russell <brussell@brocade.com>
Signed-off-by: Luca Boccassi <bluca@debian.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
A constructor is usually declared with RTE_INIT* macros.
As it is a static function, no need to declare before its definition.
The macro is used directly in the function definition.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Some global variables are defined with generic names, add component name
as prefix to variables to prevent collusion with application variables.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Tianfei Zhang <tianfei.zhang@intel.com>
Some global variables can indeed be static, add static keyword to them.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
In virtio_read_caps and vtpci_msix_detect, rte_pci_read_config returns
the number of bytes read from PCI config or < 0 on error.
If less than the expected number of bytes are read then log the
failure and return rather than carrying on with garbage.
Fixes: 6ba1f63b5a ("virtio: support specification 1.0")
Cc: stable@dpdk.org
Signed-off-by: Brian Russell <brussell@brocade.com>
Signed-off-by: Luca Boccassi <bluca@debian.org>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
NFP can handle IOVA as VA. It requires to check those IOVAs
being in the supported range what is done during initialization.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
NFP devices can not handle DMA addresses requiring more than
40 bits. This patch uses rte_dev_check_dma_mask with 40 bits
and avoids device initialization if memory out of NFP range.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Disabled vdev_netvsc build in FreeBSD because it is not supported.
Added changes to enable vdev_netvsc build if it is Linux OS and
disable in FreeBSD.
Fixes: 9fc43dbfd6 ("net/vdev_netvsc: add in meson build")
Signed-off-by: Agalya Babu RadhaKrishnan <agalyax.babu.radhakrishnan@intel.com>
Acked-by: Stephen Hemminger <sthemmin@microsoft.com>
Disabled tap build in FreeBSD because it is not supported
Added changes to enable tap build if it is Linux OS and
disable in FreeBSD.
Fixes: 095cae3668 ("net/tap: add in meson build")
Signed-off-by: Agalya Babu RadhaKrishnan <agalyax.babu.radhakrishnan@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Disabled softnic build in FreeBSD because it is not supported
Added changes to enable softnic build if it is Linux OS and
disable in FreeBSD.
Fixes: 6b2a3900e2 ("net/softnic: add to meson build")
Cc: stable@dpdk.org
Signed-off-by: Agalya Babu RadhaKrishnan <agalyax.babu.radhakrishnan@intel.com>
Acked-by: Jasvinder Singh <jasvinder.singh@intel.com>
Disabled avp build in FreeBSD because it is not supported.
Added changes to enable avp build if it is Linux OS and
disable in FreeBSD.
Fixes: ed71204dd0 ("net/avp: add to meson build")
Cc: stable@dpdk.org
Signed-off-by: Agalya Babu RadhaKrishnan <agalyax.babu.radhakrishnan@intel.com>
Acked-by: Allain Legacy <allain.legacy@windriver.com>
Disabled nfp build in FreeBSD because it is not supported
Added changes to enable NFP build if it is Linux OS and
disable in FreeBSD.
Fixes: d9b9ca7e05 ("net/nfp: add to meson build")
Cc: stable@dpdk.org
Signed-off-by: Agalya Babu RadhaKrishnan <agalyax.babu.radhakrishnan@intel.com>
Calling rte_eth_macaddr_get to get a copy of the MAC address causes
a hot spot according to profiling. We can easily get the current
MAC address by just examining the bonded device.
Signed-off-by: Chas Williams <chas3@att.com>
The driver was passing to the mbuf Rx queue ID instead of hash received
from the device. Now, the RSS hash from the Rx descriptor is being set.
Fixes: 1173fca25a ("ena: add polling-mode driver")
Cc: stable@dpdk.org
Signed-off-by: Stewart Allen <allenste@amazon.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
On the start the driver was refilling all Rx buffs, but the old ones
were not released. That way running start/stop for a few times was
causing device to run out of descriptors.
To fix the issue, IO rings are now being destroyed on stop, and
recreated on start. That way the device is not losing any descriptors.
Furthermore, there was also memory leak for the Rx mbufs, which were
created on start and not destroyed on stop.
Fixes: eb0ef49dd5 ("net/ena: add stop and uninit routines")
Cc: stable@dpdk.org
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
NICs uses different delays up to a second during their
configuration. It makes no sense to busy-wait so long wasting
CPU cycles and preventing any other threads to execute on the
same CPU core. These busy polling are the rudiments that came
from the kernel drivers where you can not sleep in interrupt
context, but as we're in userspace, we're able and should
sleep to allow other threads to run.
Delays never called on rx/tx path, so this should not affect
performance.
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This functionality was missed while adding new drivers to
the meson build.
Fixes: bfabd06000 ("net/avf: support meson build")
Fixes: 30d3d01683 ("net/qede: add in meson build")
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tx offload mask is updated in following commit: commit 1037ed842c
("mbuf: fix Tx offload mask"). Currently, the new added offload
flags are not supported in PMD and application will fail to call
PMD transmit prepare function.
This patch updates IXGBE_TX_OFFFLOAD_MASK.
Fixes: 1037ed842c ("mbuf: fix Tx offload mask")
Cc: stable@dpdk.org
Signed-off-by: Zhirun Yan <zhirun.yan@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
For function ixgbe_crypto_create_session, fetches ic_session from the
mempool. But on failure scenarios, the object is not released back to
mempool. Using rte_mempool_put the ic_session is put back to mempool.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
With the introduction of representors several eth devices are using
the same rte device (e.g. a PCI bus). When calling port detach on one
eth device it is required that all eth devices belonging to the
same rte device have been closed in advance, then the rte device
itself can be removed/detached.
This commit implements this requirement implicitly by adding a
remove callback to struct rte_pci_driver.
The new behavior can be demonstrated in testpmd.
First we attach a representor 0 using PCI address 0000:08:00.0
testpmd> port attach 0000:08:00.0,representor=[0]
Attaching a new port...
EAL: PCI device 0000:08:00.0 on NUMA socket 0
EAL: probe driver: 15b3:1013 net_mlx5
Port 0 is attached.
Done
Port 1 is attached.
Done
Port 0 is the master device (PF) - an ethdev of the PCI address.
Port 1 is representor 0 - another ethdev (representing a VF) using the
same PCI address. Next we detach port 1
testpmd> port detach 1
Removing a device...
Port 0 is closed
Port 1 is closed
Now total ports is 0
Done
Since port 0 has been implicitly closed we cannot act on it anymore.
testpmd> port stop 0
Invalid port 0
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
With the introduction of representors several eth devices are using
the same rte device (e.g. a PCI bus). It is therefore required to
release the eth device resources during an eth device close operation
rather than during an rte device removal (detach) operation.
In current version many PMDs are still releasing the eth device as
part of the rte device removal. In order to allow a smooth transition
for all PMDs to behave correctly an ethdev flag RTE_ETH_DEV_CLOSE_REMOVE
is used. When this flag is set it indicates to rte_eth_dev_close() to
call rte_eth_dev_release_port(), so the port is freed during the close
operation.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Implement probing of a rte device multiple times, see [1].
Set PCI driver RTE_PCI_DRV_PROBE_AGAIN flag to enable multiple probing
of the PCI device by the PCI common driver.
Consecutive probing requests with a devargs string may contain
repetitive master and representors devices for which eth device should
be created only once. In case an eth device already exists - silently
ignore it.
[1]
commit e9d159c3d5 ("eal: allow probing a device again")
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Most of the code uses uint64_t for MLX5_FLOW_LAYER_* and
MLX5_FLOW_ACTION_*, but there're some code using uint32_t.
Fixes: 2ed2fe5f0a ("net/mlx5: rewrite IP address UDP/TCP port by E-Switch")
Fixes: 57123c00c1 ("net/mlx5: add Linux TC flower driver for E-Switch flow")
Fixes: fc2c498ccb ("net/mlx5: add Direct Verbs translate items")
Fixes: 3d69434113 ("net/mlx5: add Direct Verbs validation function")
Fixes: 84c406e745 ("net/mlx5: add flow translate function")
Fixes: 23c1d42c71 ("net/mlx5: split flow validation to dedicated function")
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Both rte_flow and mlx5_flow redundantly have item flags. And it is not
properly set in the code. This causes wrong tunnel flag handling. A
rte_flow can have multiple expanded device flows if the flow has an RSS
action. Therefore, mlx5_flow should have the layers field.
Fixes: c4d9b9f7f3 ("net/mlx5: add Direct Verbs final functions")
Fixes: fc2c498ccb ("net/mlx5: add Direct Verbs translate items")
Fixes: 3d69434113 ("net/mlx5: add Direct Verbs validation function")
Fixes: 84c406e745 ("net/mlx5: add flow translate function")
Fixes: 4e05a229c5 ("net/mlx5: add flow prepare function")
Fixes: 23c1d42c71 ("net/mlx5: split flow validation to dedicated function")
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
In mlx5_flow*.c, static functions have names starting from 'flow_' while
shared ones start from "mlx5_flow_'.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
If a network layer is specified with no spec, it means wildcard match.
flow_dv_translate_item_*() returns without writing anything if spec is
null and it causes creation of wrong flow. E.g., the following flow has to
patch with any ipv4 packet.
flow create 0 ingress pattern eth / ipv4 / end actions ...
But, with the current code, it matches any packet because PMD doesn't write
anything about IPv4. The matcher value and mask becomes completely zero. It
should have written the IP version at least. It is same for the rest of
items.
Even if the spec is null, PMD has to write constant fields before return,
e.g. IP version and IP protocol number.
Fixes: fc2c498ccb ("net/mlx5: add Direct Verbs translate items")
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
1) remove MPLS item in validation as it doesn't have a translator.
2) add missing NVGRE item to validation
3) match switch-case order between validation and translation.
Fixes: fc2c498ccb ("net/mlx5: add Direct Verbs translate items")
Fixes: 3d69434113 ("net/mlx5: add Direct Verbs validation function")
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
In case that the library doesn't support DV flow, if enabled by
'dv_flow_en=1', print out a warning message and disable it.
Fixes: 51e72d386c ("net/mlx5: add runtime parameter to enable Direct Verbs")
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
This patch updates the functions performing the Verbs ibrary calls
in order to support different versions of the library.
The functions:
- flow_verbs_counter_new()
- flow_verbs_counter_release()
- flow_verbs_counter_query()
now have the several compilation branches, depending on the
counters support found in the system at compile time.
The flow_verbs_counter_create() function is introduced as
helper for flow_verbs_counter_new(), actually this helper
create the counters with Verbs.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The unnecessary structure filed initializers to zero are removed.
We need to do this minor preparation before the following
mlx5 counter structure modification.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
This patch updates the mlx5 glue library, new counter support
Verbs function pointers are added to the glue linking structure
mlx5_glue. This structure now contains the pointers to the both
versions of counter supporting functions due to compatibility
issues. Depending on configuration macros the functions perform
actual Verbs library calls or return an error with meaning
"feature is not supported" (NULL or ENOTSUP).
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The flow_verbs_query_count() is moved into the the group of counter
managing functions and renamed to flow_verbs_counter_query() in order
to be in unified fashion with others.
Also minor function modification is made to avoid unreachable code
warnings if there is no counter support at compile time.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The redundant check of Flow counters support in runtime is removed.
The flag flow_counter_en is eliminated from the code. The Verbs
create counter function just returns an error if no counter
support presented in the system.
If there is no any of Flow counters configuration macro defined
the log message is emited, indicating the missing counter support.
mlx5_flow_validate_action_count() fuctnion is also updated due to
flow_counter_en flag removal.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The new configuration macro HAVE_IBV_DEVICE_COUNTERS_SET_V45 is
introduced. Both makefile and meson.build are changed.
Flow counter support code depends on the following configuration
macros:
- HAVE_IBV_DEVICE_COUNTERS_SET_V42 - is defined if system supports
the "old" flow counters functionality, MLNX_OFED version from
4.2 to 4.4 is required.
- HAVE_IBV_DEVICE_COUNTERS_SET_V45 - is defined if system supports
the "new" flow counters functionality, MLNX_OVED 4.5 (or higher)
or Linux rdma-core v19 (or higher) is required.
Neither HAVE_IBV_DEVICE_COUNTERS_SET_V42 nor
HAVE_IBV_DEVICE_COUNTERS_SET_V45 is defined if there is no
counters support.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The HAVE_IBV_DEVICE_COUNTERS_SET_SUPPORT is replaced with
HAVE_IBV_DEVICE_COUNTERS_SET_V42. At this stage it is just
macro renaming. This macro is defined if system supports
the "old" Flow counters functionality, MLNX_OFED version
from 4.2 to 4.4 is required.
We need to do this preparation before introducing the new
configuration macro (HAVE_IBV_DEVICE_COUNTERS_SET_V45) for
the "new" Flow counters support.
Both makefile and meson.build are changed.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The Flow counter creation function contains two problems:
- Flow counter object in Verbs is not freed in case of memory
allocation error. The call of counter Verbs object deallocating
function is added to fix.
- The initial value of reference counter is set to one in order
to provide the correct counter object freeing in the
flow_verbs_counter_release() function. The reference counter
field should be initialized to one.
Fixes: 60bd8c9747 ("net/mlx5: add count flow action")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Tx offload mask is updated in following commit:
commit 1037ed842c ("mbuf: fix Tx offload mask").
Currently, the new added offload flags are not supported in PMD
and application will fail to call PMD transmit prepare function.
This patch updates PMD Tx offload mask.
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
If hash function is 0, it should disable RSS then return 0.
Fixes: 518cc3927b ("net/ixgbe: move RSS to flow API")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Some operations in i40evf_dev_close like i40evf_dev_promiscuous_disable
still need alarm handler to clear the pending cmd, if alarm handler is
canceled in early stage of i40evf_dev_close,
i40evf_dev_promiscuous_disable will result in failure.
Fixes: 864a800d70 ("net/i40e: remove VF interrupt handler")
Cc: stable@dpdk.org
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
In FVL, there was an issue and it didn't support the loopback function
before FW 5.0. For FPK (X722) it should work.
So it needs to distinguish between the devices by checking MAC type.
Fixes: 689bba3327 ("i40e: add VEB switching support")
Fixes: bce83974ba ("net/i40e: set Tx loopback from PF")
Cc: stable@dpdk.org
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
In ixgbe_flow_create function, ntuple filter is parsed first. If the
flow is considered to be ntuple filter, it will not go on to judge
ethertype filter, syn filter and fdir filter.
In the function ntuple_filter_to_5tuple, 5 tuple info is checked,
but it's too late to jump over the ntuple filter if it's a fdir filter.
Fixes: 46ea969177 ("net/ixgbe: add ntuple support to flow parser")
Cc: stable@dpdk.org
Signed-off-by: Faicker Mo <faicker.mo@ucloud.cn>
Acked-by: Wei Zhao <wei.zhao1@intel.com>
The representor id is added in rte_eth_dev_data in order to be able
to match a port with its representor id in devargs.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
As described in series starting at [1], it adds option to set
metadata value as match pattern when creating a new flow rule.
This patch adds metadata support in mlx5 driver, in two parts:
- Add the validation and setting of metadata value in matcher,
when creating a new flow rule.
- Add the passing of metadata value from mbuf to wqe when
indicated by ol_flag, in different burst functions.
[1] "ethdev: support metadata as flow rule criteria"
http://mails.dpdk.org/archives/dev/2018-September/113269.html
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The hotplug attach/detach features are implemented in EAL layer.
There is a new ethdev iterator to retrieve ports from ethdev layer.
As announced earlier, the (buggy) ethdev functions are now removed.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
This commit adds support for configuring flows destined to the mlx5
eswitch with 'count' action and for querying these counts at runtime.
Each flow rule configured by the mlx5 driver is implicitly assigned
with flow counters. These counters can be retrieved when querying
the flow rule via Netlink, they can be found in each flow action
section of the reply. Hence, supporting the 'count' action in the
flow configuration command is straight-forward. When transposing
the command to a tc Netlink message we just ignore it instead of
rejecting it.
In the 'flow query count' side, the command now uses tc Netlink
query command in order to retrieve the values of the flow counters.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Flow engine now supports multiple driver paths with each having
its own flow query implantation routine.
This patch adds an abstraction to the flow query routine in accordance
to commit 0c76d1c9a1 ("net/mlx5: add abstraction for multiple flow
drivers") done by Yongseok Koh.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
modified TC-flow code to use the new infrastructure
introduced in "net/mlx5: refactor TC-flow infrastructure"
commit.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
This commit refactors tc_flow as a preparation to coming commits
that sends different type of messages and expect differ type of replies
while still using the same underlying routines.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
After previous changes, the function rte_eth_dev_release_port()
can be used for primary or secondary process as well.
The only difference with rte_eth_dev_release_port_secondary()
is the shared lock used in rte_eth_dev_release_port().
The function rte_eth_dev_release_port_secondary() was recently
added in 18.11 cycle.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
This is a clean-up of common ethdev data freeing.
All data freeing are moved to rte_eth_dev_release_port()
and done only in case of primary process.
It is probably fixing some memory leaks for PMDs which were
not freeing all data.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
The following commit has added a number of existing offload flags such
as PKT_TX_IPV4 and PKT_TX_IPV6 to PKT_TX_OFFLOAD_MASK defined in
rte_mbuf.h. That change breaks the enic driver's Tx prepare handler.
commit ef28cfa73822 ("mbuf: fix Tx offload mask")
The enic driver keeps the supported offload flags in a local variable
(tx_offload_mask), which is strictly a subset of
PKT_TX_OFFLOAD_MASK. This variable is then used to compute the
unsupported flags (tx_offload_notsup_mask), and the Tx prepare handler
(tx_pkt_prepare) uses it to reject packets with unsupported offload
flags.
As is, tx_offload_notsup_mask ends up containing flags like
PKT_TX_IPV4 that are actually supported by the driver, which then
breaks any application that uses checksum offloads and calls the Tx
prepare handler. So add the flags to tx_offload_mask that the driver
supports but were missing in PKT_TX_OFFLOAD_MASK.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
The handler for dev_supported_ptypes_get currently returns null when
the vectorized Rx handler is used. It is also missing tunnel packet
types. Add the missing packet types to the supported list, and return
the right list for the vectorized Rx handler.
Fixes: 8a6ff33d6d ("net/enic: add AVX2 based vectorized Rx handler")
Fixes: 93fb21fdbe ("net/enic: enable overlay offload for VXLAN and GENEVE")
Cc: stable@dpdk.org
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Promisc should not be disabled if the all multicast mode is enabled.
Patch keeps the promiscuous on if all multicast mode is on, this
behavior is also consistent with the implementation done on ixgbe
pmd.
Cc: stable@dpdk.org
Signed-off-by: Huaibin Wang <huaibin.wang@6wind.com>
Signed-off-by: Laurent Hardy <laurent.hardy@6wind.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
In the case the device is created by the primary process,
the secondary must request some file descriptors to attach the queues.
The file descriptors are shared via IPC Unix socket.
Thanks to the IPC synchronization, the secondary process
is now able to do Rx/Tx on a TAP created by the primary process.
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
fd's cannot be shared between processes, and each process need to have
it's own fd's pointer.
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Port and queue ids are added to easily map the file
descriptors stored in each process private.
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
'OCTEON TX' is the registered name. All other usages need to be fixed.
Signed-off-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This patch updates the CLI parsing of softnic with extra symmetric
cryptodev, port, session, and action support.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch adds symmetric crypto action support to softnic.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch enables the crypt port configuration in softnic.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch adds cryptodev abstraction to softnic. The DPDK
Cryptodevs are abstracted as crypto ports in the softnic.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
eal: add shorthand __rte_weak macro
qat: update code to use __rte_weak macro
avf: update code to use __rte_weak macro
fm10k: update code to use __rte_weak macro
i40e: update code to use __rte_weak macro
ixgbe: update code to use __rte_weak macro
mlx5: update code to use __rte_weak macro
virtio: update code to use __rte_weak macro
acl: update code to use __rte_weak macro
bpf: update code to use __rte_weak macro
Signed-off-by: Keith Wiles <keith.wiles@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
In case the link is down during initial link state check, messages for
link state check flood the console. Reducing the log level for these.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
We use _GNU_SOURCE all over the place, but often times we miss
defining it, resulting in broken builds on musl. Rather than
fixing every library's and driver's and application's makefile,
fix it by simply defining _GNU_SOURCE by default for all
builds.
Remove all usages of _GNU_SOURCE in source files and makefiles,
and also fixup a couple of instances of using __USE_GNU instead
of _GNU_SOURCE.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
When writev fails to send packets it doesn't update the
number of Tx packets, but it still num_tx is updated.
The value that should be returned is the actual number
of sent packets which is num_packets.
Fixes: 02f96a0a82 ("net/tap: add TUN/TAP device PMD")
CC: stable@dpdk.org
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
At the tail end of comment about barriers (I feel your pain);
remove mild profanity.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
On some ARM environment, the below compilation error will be seen
dpdk/drivers/net/mlx5/mlx5_flow_dv.c: In function
'flow_dv_translate_item_nvgre':
/tmp/dpdk/drivers/net/mlx5/mlx5_flow_dv.c:785:22: error: pointer targets
in initialization differ in signedness [-Werror=pointer-sign]
const char *tni_v = nvgre_v->tni;
The reason for this error is that nvgre_v->tni is defined as byte array
in size of 3B. However the code in the function iterate till the 4B in
order to copy/set also the subsequent field after it (flow_id)
Fixing by pointing to this struct from a different pointer.
Fixes: fc2c498ccb ("net/mlx5: add Direct Verbs translate items")
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Introduce a new postcopy-support parameter to Vhost PMD that
passes the RTE_VHOST_USER_POSTCOPY_SUPPORT flag at vhost
device register time.
Flag should only be set if application does not prefault guest
memory using, for example, mlockall() syscall.
Default value is 0, meaning that postcopy support is disabled
unless specified explicitly.
Example to enable postcopy support for a given device:
--vdev 'net_vhost0,iface=/tmp/vhost-user1,postcopy-support=1'
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Offload following modify MAC address actions to E-Switch
via TC-Flower driver
- RTE_FLOW_ACTION_TYPE_SET_MAC_SRC
- RTE_FLOW_ACTION_TYPE_SET_MAC_DST
The corresponding rte_flow_item_eth must be present in
rte_flow pattern
Only support modify outer layer MAC address
The example testpmd command is:
flow create 0 transfer ingress
pattern eth / ipv4 / udp dst is 7000 / end
actions set_mac_dst mac_addr dd:00:aa:11:bb:33 /
set_mac_src mac_addr bb:00:cc:11:aa:22 /
port_id id 1 / end
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Offload following modify TTL actions to E-Switch via
TC-Flower driver
- RTE_FLOW_ACTION_TYPE_SET_TTL
- RTE_FLOW_ACTION_TYPE_DEC_TTL
The corresponding IP protocol rte_flow_item_ipv[4|6]
must be present in rte_flow pattern otherwith PMD
return error
The example testpmd commands are:
flow create 0 transfer ingress
pattern eth / ipv4 / udp dst is 7000 / end
actions dec_ttl /
port_id id 1 / end
flow create 0 transfer ingress
pattern eth / ipv4 / udp dst is 7001 / end
actions set_ttl ttl_value 10 /
port_id id 1 / end
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Implement RTE_FLOW_ACTION_TYPE_MAC_SWAP to offload flows with
action to swap the source and destination MAC addresses in the
outermost Ethernet header.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Attempt to allocate smaller chunk of mbufs when larger amount is
not available. Report error when small chunk not available.
Signed-off-by: Ed Czeck <ed.czeck@atomicrules.com>
Now that logging of initialization is controlled by dynamic debug
level, remove the #ifdef for RTE_LIBRTE_QEDE_DEBUG_INIT since that
config option does not exist in common_base and is not documented.
Fixes: 69b6573980 ("net/qede: implement dynamic logging")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
DEBUG_DUMP_DESC flag is enabled/disabled from Makefile and enabling it
causing the build issue.
Add the missed 'volatile' keyword to avoid the warning for type
mismatch, which will be treated as compiler error if WERROR_FLAGS
is enabled.
Fixes: bfd38e4d70 ("net/avf: fix missing compiler error flags")
CC: stable@dpdk.org
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
If the build environment doesn't have 'linux/tc_act/tc_pedit.h' header,
compiler will use needed structs defined in mlx5_flow_tcf.c.
However, there is a zero-size array defined in one struct and
ISO C forbids this when -Wpedantic is set by debug mode.
Simply put __extension__ keyword before the struct in question.
Fixes: 2ed2fe5f0a ("net/mlx5: rewrite IP address UDP/TCP port by E-Switch")
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
rte_flow has 'group' attribute and 'jump' action in order to support
multiple groups. This feature is known as multi-table support ('chain' in
linux TC flower) in general because a group means a table of flows. Example
commands are:
flow create 0 transfer priority 1 ingress
pattern eth / vlan vid is 100 / end
actions jump group 1 / end
flow create 0 transfer priority 1 ingress
pattern eth / vlan vid is 200 / end
actions jump group 2 / end
flow create 0 transfer group 1 priority 2 ingress
pattern eth / vlan vid is 100 /
ipv4 dst spec 192.168.40.0 dst prefix 24 / end
actions drop / end
flow create 0 transfer group 1 priority 2 ingress
pattern end
actions of_pop_vlan / port_id id 1 / end
flow create 0 transfer group 2 priority 2 ingress
pattern eth / vlan vid is 200 /
ipv4 dst spec 192.168.40.0 dst prefix 24 / end
actions of_pop_vlan / port_id id 2 / end
flow create 0 transfer group 2 priority 2 ingress
pattern end
actions port_id id 2 / end
With theses flows, if a packet having vlan 200 and src_ip as 192.168.40.1,
this packet will firstly hit the 1st flow. Then it will hit the 5th flow
because of the 'jump' action. As a result, the packet will be forwarded to
port 2 (VF representor) with vlan tag being stripped off. If the packet had
vlan 100 instead, it would be dropped by the 3rd flow.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
This patch add support for dumping MAC registers.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Add support for EEPROM reading/writing.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
VLAN filters and VLAN offloads implementation.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
