In order to align name with other PCI driver flag such as
RTE_PCI_DRV_NEED_MAPPING and to reflect its purpose, change
RTE_PCI_DRV_IOVA_AS_VA flag name as RTE_PCI_DRV_NEED_IOVA_AS_VA.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
The incriminated commit broke the use of RTE_PCI_DRV_IOVA_AS_VA which
was intended to mean "driver only supports VA" but had been understood
as "driver supports both PA and VA" by most net drivers and used to let
dpdk processes to run as non root (which do not have access to physical
addresses on recent kernels).
The check on physical addresses actually closed the gap for those
drivers. We don't need to mark them with RTE_PCI_DRV_IOVA_AS_VA and this
flag can retain its intended meaning.
Document explicitly its meaning.
We can check that a driver requirement wrt to IOVA mode is fulfilled
before trying to probe a device.
Finally, document the heuristic used to select the IOVA mode and hope
that we won't break it again.
Fixes: 703458e19c ("bus/pci: consider only usable devices for IOVA mode")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Tested-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
This reverts commit 0cb86518db.
The PCI bus now reports DC when faced with a device bound to an unknown
driver and, in such a case, the IOVA mode is selected against physical
address availability.
As a consequence, there is no reason for this special case for Mellanox
drivers.
Fixes: 703458e19c ("bus/pci: consider only usable devices for IOVA mode")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
fslmc_vfio.c:387:36: note: format string is defined here
DPAA2_BUS_DEBUG("VFIO dmamap 0x%llx:0x%llx, size 0x%llx\n",
format ‘%llx’ expects argument of type ‘long long unsigned int’
argument 6 has type ‘__u64 {aka long unsigned int}’
Fixes: 2b5fa25708 ("mempool/dpaa2: map external memory with VFIO")
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch removes the unnecessary err prints when using
non-dpaa2 devices.
Fixes: e67a61614d ("bus/fslmc: support device iteration")
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch removes the unnecessary err prints when using
non-dpaa devices.
Fixes: e79df833d3 ("bus/dpaa: support hotplug ops")
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Update softnic tm function for configuration flexiblity of pipe
traffic classes and queues size.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Abraham Tovar <abrahamx.tovar@intel.com>
Signed-off-by: Lukasz Krakowiak <lukaszx.krakowiak@intel.com>
The session init shall return failure if the internal
session create fails for any reasons.
Fixes: 13273250ee ("crypto/dpaa2_sec: support AES-GCM and CTR")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
BT0 block type padding after rfc2313 has been discontinued.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Shally Verma <shallyv@marvell.com>
Asymmetric nature of RSA algorithm suggest to use
additional field for output. In place operations
still can be done by setting cipher and message pointers
with the same memory address.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Shally Verma <shallyv@marvell.com>
This patch fixes fail status returned from compression PMD
in case destination buffer size is not enough to store
all data.
Fixes: 3dc9ef2d23 ("compress/qat: fix returned status on overflow")
Cc: stable@dpdk.org
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Resolution for seg-faults observed:
1) in buffer re-alignment in-place sgl case
2) case where data end is exactly at end of an sgl segment.
Also renamed variable and increased comments for clearer code.
Fixes: 40002f6c2a ("crypto/qat: extend support for digest-encrypted auth-cipher")
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Damian Nowak <damianx.nowak@intel.com>
This patch changes the key pointer data types in cipher, auth,
and aead xforms from "uint8_t *" to "const uint8_t *" for a
more intuitive and safe sessionn creation.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Liron Himi <lironh@marvell.com>
Since direct register access is used in npa_lf_aura_op_alloc_bulk()
use __rte_noinline instead of __rte_always_inline to preserve ABI.
Based on the compiler npa_lf_aura_op_alloc_bulk might be inlined
differently which may lead to undefined behaviour due to handcoded
asm.
Fixes: 29893042c2 ("mempool/octeontx2: fix clang build for arm64")
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
When initializing EAL with "-w 0:0.0", this error is blocking:
munmap_chunk(): invalid pointer
ElectricFence reports this root cause:
free(7fffeec25a11): address not from malloc()
Fixes: e67a61614d ("bus/fslmc: support device iteration")
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Tested-by: Thomas Monjalon <thomas@monjalon.net>
Putting color escape sequences in the log look pretty for the
developer but fails in real world DPDK usage. A real application
will put DPDK log to syslog, and syslog does not handle escape
sequences.
Fixes: dd543124cd ("common/octeontx2: add runtime log infra")
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Jerin Jacob <jerinj@marvell.com>
LS1088 platform CENA operation are causing issues
at high load. CINH (cache inhibited) mode is working
fine with minor performance impact.
This patch enables CINH mode selectively on LS1088 platform
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
This patch adds following:
1. 'g_container' variable name is not right way to represent the
FSLMC container. Renaming it to fslmc_container.
2. dynamic selection of IOMMU mode based on run environment
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Recent (18.11+), devargs structure was changed and so was DPDK port
usage in applications like OVS. Applications are now allowed to
plug/unplug ports (eth) using APIs (hotplug) based on device
arguments.
This patch enables the plug/unplug function (which are dummy for
FSLMC) and the iterator function for rte_dev_probe() and similar
API support.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Update platform support of CNF95xx in documentation and
also, update the HW cap based on PCI subsystem id and revision id.
This patch also changes HW capability handling to be based on
PCI Revision ID. PCI Revision ID contains a unique identifier
to identify chip, major and minor revisions.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Populating the eventfd in rte_intr_enable in each request to vfio
triggers a reconfiguration of the interrupt handler on the kernel side.
The problem is that rte_intr_enable is often used to re-enable masked
interrupts from drivers interrupt handlers.
This reconfiguration leaves a window during which a device could send
an interrupt and then the kernel logs this (unsolicited from the kernel
point of view) interrupt:
[158764.159833] do_IRQ: 9.34 No irq handler for vector
VFIO api makes it possible to set the fd at setup time.
Make use of this and then we only need to ask for masking/unmasking
legacy interrupts and we have nothing to do for MSI/MSIX.
"rxtx" interrupts are left untouched but are most likely subject to the
same issue.
Reported-at: https://bugzilla.redhat.com/show_bug.cgi?id=1654824
Fixes: 5c782b3928 ("vfio: interrupts")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Tested-by: Shahed Shaikh <shshaikh@marvell.com>
Use rte_ether_unformat_addr rather than sscanf.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Use rte_ether_unformat_addr rather than sscanf.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Matan Azrad <matan@mellanox.com>
Use rte_ether_unformat_addr rather than sscanf.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Use rte_ether_unformat_addr rather than sscanf.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The cmdline library used to be the only way to parse a
mac address. Now there is rte_ether_unformat_addr.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Formatting Ethernet address and getting a random value are
not in critical path so they should not be inlined.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Rami Rosen <ramirose@gmail.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
XSK_UMEM__DEFAULT_FRAME_SIZE has been changed to 4096 in kernel commit
123e8da1d330 (xsk: Change the default frame size to 4096 and allow
controlling it),
but we still need to keep ETH_AF_XDP_FRAME_SIZE as 2048 to fit most
dpdk apps.
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
On DV/DR flow engine, MLX5 can match on ICMP/ICMP6's code and type field
via FLEX Parser, which can be enabled by config FW using FLEX Parser
profile 2:
mlxconfig -d <mst device> -y set FLEX_PARSER_PROFILE_ENABLE=2
The testpmd commands could be:
testpmd> flow create 0 ingress pattern eth / ipv4 /
icmp type is 8 code is 0 / end
actions rss queues 0 1 end / end
testpmd> flow create 0 ingress pattern eth / ipv6 /
icmp6 type is 128 code is 0 / end
actions rss queues 0 1 end / end
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Mellanox NICs do not support UDP checksum hardware tx offload over IPv6.
This limitation becomes critical for UDP based tunnels like VXLAN.
Beside the UDP checksum validity is required by IPv6 there is an option
in Linux to allow accepting UDP zero sum (see udp6zerocsumrx in iproute2
package).
This patch zeroes out the UDP checksum field for encapsulation headers
in raw encap action.
Signed-off-by: Eli Britstein <elibr@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Currently mlx4/mlx5 support only Linux.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Since 18.11, it is suggested that driver should release all its private
resources at the dev_close routine. So all resources previously released
in remove routine are now released at the dev_close routine, and the
dev_close routine will be called in driver remove routine in order to
support removing a device without closing its ports.
Above behavior changes are supported by setting RTE_ETH_DEV_CLOSE_REMOVE
flag during probe stage.
Signed-off-by: Yuri Chipchev <yuric@marvell.com>
Reviewed-by: Liron Himi <lironh@marvell.com>
The shift left operation "pkt->vlan_tci << 16" gets vlan_tci extended
to signed type and may cause invalid descriptor. Also the same issue for
the "data_len" field. This patch fixes it by casting them to uint64_t.
Fixes: 21f13c541e ("fm10k: add vector Tx")
Cc: stable@dpdk.org
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch implements statistics read and reset function for ipn3ke.
Signed-off-by: Andy Pei <andy.pei@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
ipn3ke can work on 10G mode and 25G mode.
10G mode and 25G mode has different MAC register address for statistics.
This patch implements statistics registers for 10G mode and 25G mode.
Also implements different stats clearing per mode.
Fixes: c01c748e4a ("net/ipn3ke: add new driver")
Cc: stable@dpdk.org
Signed-off-by: Andy Pei <andy.pei@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Original code is compatible with older device, whose mac register
address is no more than 10 bits. Now we have mac register address
longer than 10 bits, so we just delete the mask here.
Fixes: c01c748e4a ("net/ipn3ke: add new driver")
Cc: stable@dpdk.org
Signed-off-by: Andy Pei <andy.pei@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
In i40e_flow_flush_fdir_filter, i40e_fdir_teardown is called, so
i40e_fdir_setup is required to be called before create a new fdir flow.
Bugzilla ID: 265
Fixes: 2e67a7fbf3 ("net/i40e: config flow director automatically")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The APIs in the rte_bus_vdev.h file were not part of the API
documentation. I added this header file to the doxygen config file with
the name vdev.
Signed-off-by: Aideen McLoughlin <aideen.mcloughlin@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add PTP support for SSO based on rx_offloads of the queue connected to
it.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Fixes: 371a688fc1 ("event/sw: support linking queues to ports")
Cc: stable@dpdk.org
Signed-off-by: Dilshod Urazov <dilshod.urazov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
mbox_unregister_vf_irq and mbox_unregister_pf_irq returns void value.
mbox_unregister_irq also returns void.
Clang with flags '-Wall -Wextra -pedantic' complains about:
void function should not return void expression
Signed-off-by: Krzysztof Kanas <kkanas@marvell.com>
The functions rte_service_may_be_active(), rte_service_lcore_attr_get(),
and rte_service_attr_reset_all() were introduced nearly a year ago in DPDK
18.08. They can be considered non-experimental for the 19.08 release.
rte_service_may_be_active() is used by the sw PMD, and this commit allows
it to not need any experimental API.
Signed-off-by: Gage Eads <gage.eads@intel.com>
Fix npa pool range errors observed while creating mempool, this issue
happens when mempool objects are from different mem segments.
During mempool creation, octeontx2 mempool driver populates pool range
fields before enqueuing the buffers. If any enqueue or dequeue operation
reaches npa hardware prior to the range field's HW context update,
those ops result in npa range errors. Patch adds a routine to read back
HW context and verify if range fields are updated or not.
Fixes: e5271c507a ("mempool/octeontx2: add remaining slow path ops")
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
The existing code is enabling the Tx queues as per
the number of lcore count, which is causing issue
in case of secondary process running on different number
of cores.
This patch fixes the Tx queues to number of DPAA cores,
which helps in using fixed number of Tx queues across
processes access.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
1. need to use the bpool with rte_malloc instead of rte_free
2. Option to give portal to the secondary process thread.
Signed-off-by: Radu Bulie <radu-andrei.bulie@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Tested-by: Akhil Goyal <akhil.goyal@nxp.com>
Parse and find_device have specific function - former is for parsing a
string passed as argument, whereas the later is for iterating over all
the devices in the bus and calling a callback/handler. They have been
corrected with their right operations to support hotplugging/devargs
plug/unplug calls.
Support for plug/unplug too has been added.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Implementation still based on Intel SDK libraries
optimized for AVX512 instructions set and 5GNR.
This can be also build for AVX2 for 4G capability or
without SDK dependency for maintenance.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
Extension to BBDEV operations to support 5G
on top of existing 4G operations.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
Renaming of the enums and structure which were LTE specific to
allow for extension and support for 5GNR operations.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
This patch adds condition to be met when using
out-of-place auth-cipher operations. It checks
if the digest location overlaps with the data to
be encrypted or decrypted and if so, treats as a
digest-encrypted case.
Patch adds checking, if the digest is being
encrypted or decrypted partially and extends PMD
buffers accordingly.
It also adds feature flag for QuickAssist
Technology to emphasize it's support for digest
appended auth-cipher operations.
Signed-off-by: Damian Nowak <damianx.nowak@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
In case big number need to be freed, data it contains should
also be cleared before especially if it is critical data like
private keys.
Fixes: 3e9d6bd447 ("crypto/openssl: add RSA and mod asym operations")
Cc: stable@dpdk.org
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
When ixgbe_crypto_add_sa() is called, it checks whether the ip type is
IPv6 or IPv4 to write correct addresses to the registers. Type itself
is never specified, and act as IPv4, which is the default value.
It causes lack of support for IPv6.
To fix that, ip type needs to be stored in device private data, based on
crypto session ip type field, before the checking is done.
Fixes: ec17993a14 ("examples/ipsec-secgw: support security offload")
Fixes: 9a0752f498 ("net/ixgbe: enable inline IPsec")
Cc: stable@dpdk.org
Signed-off-by: Mariusz Drost <mariuszx.drost@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Turbo_sw PMD driver now building with meson/ninja
with or without SDK libraries.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Adding compile flag to allow to build the turbo_sw PMD
without dependency to have the SDK libraries installed.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch fixes the out-of-bounds coverity issue by adding
missed algorithms to the array.
Coverity issue: 337683
Fixes: c68d7aa354 ("crypto/aesni_mb: use architecture independent macros")
Cc: stable@dpdk.org
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
ANSI C memcmp is not constant time function per spec so it should
be avoided in cryptography usage.
Fixes: d61f70b4c9 ("crypto/libcrypto: add driver for OpenSSL library")
Cc: stable@dpdk.org
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
The release function was using qp->stream after already
releasing it and the null pointer checking was missing.
Also since rte_free(NULL) is a no-op, remove unnecessary
checks for NULL.
Coverity issure: 340860
Fixes: dc49e6aa48 ("compress/isal: add ISA-L compression functionality")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Lee Daly <lee.daly@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
rte_calloc functions returns a non-null pointer in case of
success and null pointer in case of failure.
The return value should be checked and the function flow
should take that into consideration.
This patch adds a check for rte_calloc return value in function
flow_list_create.
Fixes: 84c406e745 ("net/mlx5: add flow translate function")
Cc: stable@dpdk.org
Signed-off-by: Asaf Penso <asafp@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
mlx5_link_update uses the newer ethtool command
ETHTOOL_GLINKSETTINGS to determine interface capabilities but falls
back to the older (deprecated) ETHTOOL_GSET command if the new
method fails for any reason.
The older method only supports reporting of capabilities up to 40G.
However, mlx5_link_update_unlocked_gs can return a failure for a
number of reasons (including the link being down).
Using the older method in cases of transient failure of the method
can result in reporting of reduced capabilities to the application.
The older method (mlx5_link_update_unlocked_gset) should only be
invoked if the newer method returns EOPNOTSUPP.
Fixes: 7d2e32f76c ("net/mlx5: fix ethtool link setting call order")
Cc: stable@dpdk.org
Reported-by: Srinivas Narayan <srinivas.narayan@att.com>
Signed-off-by: Asaf Penso <asafp@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
This commit removes the support of configuring the device E-switch
using TCF since it is now possible to configure it via DR (direct
verbs rules), and by that to also remove the PMD dependency in libmnl.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
mlx5 implements mlx5_flow_null_drv_ops to be used when a specific
flow typei/driver is not available or invalid.
This routines return error without modifying the rte_flow_error
parameter passed to them which causes testpmd, for example, to crash.
This commit addresses the issue by modifying the rte_flow_error
parameter in theses routines.
Fixes: 0c76d1c9a1 ("net/mlx5: add abstraction for multiple flow drivers")
Fixes: 684dafe795 ("net/mlx5: add flow query abstraction interface")
Cc: stable@dpdk.org
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Add support for setting the link up and down.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
This patch implements rx interrupts feature required for power
saving. These interrupts can be enabled/disabled on demand.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add MTU set operation and MTU update feature.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add device start operation and update the correct
function pointers for Rx and Tx burst functions.
This patch also update the octeontx2 NIC specific documentation.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Add vector version of packet Receive function.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Implement support for setting VLAN TPID and PVID for Tx packets.
Signed-off-by: Vivek Sharma <viveksharma@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Support setting up VLAN filters so as to allow tagged
packet's reception after VLAN HW Filter offload is enabled.
Signed-off-by: Vivek Sharma <viveksharma@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Support configuring VLAN offloads for an ethernet device and
dynamic promiscuous mode configuration for VLAN filters where
filters are updated according to promiscuous mode of the device.
Signed-off-by: Vivek Sharma <viveksharma@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Adding the flow init and fini functionality. These will be called from
dev init and will initialize and de-initialize the flow related memory.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Vivek Sharma <viveksharma@marvell.com>
Adding few more flow operations like flow_destroy, flow_isolate
and flow_flush.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Vivek Sharma <viveksharma@marvell.com>
Adding the initial flow ops like flow_create and flow_validate.
These will be used to alloc and write flow rule to device and
validate the flow rule.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Vivek Sharma <viveksharma@marvell.com>
Adding support to parse flow actions like drop, count, mark, rss, queue.
On egress side, only drop and count actions were supported.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Vivek Sharma <viveksharma@marvell.com>
Adding functionality to parse inner layers from la to lc.
These will be used to parse inner layers L2, L3, L4 types.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Vivek Sharma <viveksharma@marvell.com>
Adding functionality to parse outer layers from ld to lh.
These will be used parse outer layers L2, L3, L4 and tunnel types.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Vivek Sharma <viveksharma@marvell.com>
Adding MCAM utility functions to alloc and write the entries.
These will be used to arrange the flow rules based on priority.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Vivek Sharma <viveksharma@marvell.com>
Adding mailbox utility functions for rte_flow. These will be used
to alloc, reserve and write the entries to the device on request.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Vivek Sharma <viveksharma@marvell.com>
First pass rte_flow utility functions for octeontx2.
These will be used to communicate with AF driver.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Vivek Sharma <viveksharma@marvell.com>
Introducing flow infra for octeontx2.
This will be used to maintain rte_flow rules.
Create, destroy, validate, query, flush, isolate flow operations
will be supported.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Vivek Sharma <viveksharma@marvell.com>
Add remaining PTP configuration/slowpath operations.
Timesync feature is available only for PF devices.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Signed-off-by: Zyta Szpak <zyta@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add flow control operations and exposed
otx2_nix_update_flow_ctrl_mode() to enable on the
configured mode in dev_start().
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Add Rx and Tx queue descriptor related operations.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Add Rx and Tx queue info get and pool ops supported operations.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
The fields from CQE needs to be converted to
ptype and rx ol flags in mbuf. This patch adds
create lookup memory for those items to be
used in Fastpath.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Harman Kalra <hkalra@marvell.com>
This patch enables pkt transmit through traffic manager
hierarchy by clearing software XOFF on the nodes and linking
tx queues to corresponding leaf nodes.
It also adds support to start and stop tx queue using
traffic manager.
Signed-off-by: Krzysztof Kanas <kkanas@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
This patch sets up and configure hierarchy in hw
nodes. Since all the registers are with RVU AF,
register configuration is also done using mbox
communication.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Krzysztof Kanas <kkanas@marvell.com>
Allocate and free shaper/scheduler hardware resources for
nodes of hierarchy levels in sw.
Signed-off-by: Krzysztof Kanas <kkanas@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Introduce traffic manager infra and default hierarchy
creation.
Upon ethdev configure, a default hierarchy is
created with one-to-one mapped tm nodes. This topology
will be overridden when user explicitly creates and commits
a new hierarchy using rte_tm interface.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Krzysztof Kanas <kkanas@marvell.com>
Add queue start and stop operations. Tx queue needs
to update the flow control value, Which will be
added in sub subsequent patch.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
setup tx & rx queues with the previous configuration during
port reconfig, it handles cases like port reconfigure without
reconfiguring tx & rx queues.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Add RSS support and expose RSS related functions
to implement RSS action for rte_flow driver.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Add unicast MAC filter for PF device and
update the respective feature list.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add promiscuous and allmulticast mode for PF devices and
update the respective feature list.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add basic stat operation and updated the feature list.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Add link stats related operations and mark respective
items in the documentation.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Add register dump support and mark Registers dump in features.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Add device configure operation. This would call lf_alloc
mailbox to allocate a NIX LF and upon return, AF will
return the attributes for the select LF.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Add basic init and uninit function which includes
attaching LF device to probed PCIe device.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Adding bare minimum PMD library and doc build infrastructure
and claim the maintainership for octeontx2 PMD.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Testpmd would stuck and result in core dump when user specifies an
invalid VF queue number, for example when setting txq or rxq to 0.
When txq or rxq is set to 0, pointer of pointer rxq or txq in
function i40evf_configure_vsi_queues is NULL. The usage of txq[i]
or rxq[0] is valid. This patch fixes this issue.
Fixes: d6b1972909 ("i40evf: support configurable crc stripping")
Cc: stable@dpdk.org
Signed-off-by: Andy Pei <andy.pei@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The definition of ipsec and rsc offloads was incorrect.
Neither one of these is used by current driver, but the values
should be fixed now for future RSC support.
Fixes: 4e9c73e96e ("net/netvsc: add Hyper-V network device")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Kernel validates block size to be aligned to page size. Code works on
platforms with page size 4k, but on others e.g. Arm64 fails with default
parameters.
Signed-off-by: Krzysztof Kanas <kkanas@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch implements additional actions of packet header
modifications.
Add actions:
- INC_TCP_SEQ - Increase sequence number in the outermost TCP header.
- DEC_TCP_SEQ - Decrease sequence number in the outermost TCP header.
- INC_TCP_ACK - Increase acknowledgment number in the outermost TCP
header.
- DEC_TCP_ACK - Decrease acknowledgment number in the outermost TCP
header.
Original work by Xiaoyu Min.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Set RTE_ETH_DEV_CLOSE_REMOVE upon probe so all the resources
for the port can be freed by rte_eth_dev_close() and the ethdev
port freed.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
PCI device may be unplugged when ethdev is not closed yet.
Fixes: aaa3f5f0f7 ("net/sfc: add configure and close stubs")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Now that everything that has ever accessed the shared memory
config is doing so through the public API's, we can make it
internal. Since we're removing quite a few headers from
rte_eal_memconfig.h, we need to add them back in places
where this header is used.
This bumps the ABI, so also change all build files and make
update documentation.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: David Marchand <david.marchand@redhat.com>
Currently, the memory hotplug is locked automatically by all
memory-related _walk() functions, but sometimes locking the
memory subsystem outside of them is needed. There is no
public API to do that, so it creates a dependency on shared
memory config to be public. Fix this by introducing a new
API to lock/unlock the memory hotplug subsystem.
Create a new common file for all things mem config, and a
new API namespace rte_mcfg_*, and search-and-replace all
usages of the locks with the new API.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: David Marchand <david.marchand@redhat.com>
When selecting the preferred IOVA mode of the pci bus, the current
heuristic ("are devices bound?", "are devices bound to UIO?", "are pmd
drivers supporting IOVA as VA?" etc..) should honor the device
white/blacklist so that an unwanted device does not impact the decision.
There is no reason to consider a device which has no driver available.
This applies to all OS, so implements this in common code then call a
OS specific callback.
On Linux side:
- the VFIO special considerations should be evaluated only if VFIO
support is built,
- there is no strong requirement on using VA rather than PA if a driver
supports VA, so defaulting to DC in such a case.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
When using _mm_set_epi64() rather than _mm_set_epi64x() intrinsic, ICC
tries to use the x87 floating point registers, leading to warnings about
not properly clearing value when switching between x87 and SSE/AVX modes.
error #13203: No EMMS instruction before call to function
Fix this by using the set64x() intrinsic.
Fixes: 0a92e63fc4 ("raw/ioat: add local API to perform copies")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Tested-by: Anatoly Burakov <anatoly.burakov@intel.com>
Enable an example for rawdev ntb. Support interactive mode to send
file on one host and receive file from another host. The command line
would be 'send [filepath]' and 'receive [filepath]'.
But since the FIFO is not enabled right now, use rte_memcpy as the enqueue
and dequeue functions and only support transmitting file no more than 4M.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Add handshake process using doorbell so that two hosts can
communicate to start and stop.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Add in the list of registers for the device.
And enable NTB device ops for Intel Skylake platform.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Introduce rawdev driver support for NTB (Non-transparent Bridge) which
can help to connect two separate hosts with each other.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Sample test to verify DMA functionality, this test covers
internal transfer mode.
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
