This patch improves the performance of AES GCM by using
the Single Pass Crypto Request functionality when running
on GEN3 QAT. Falls back to the classic 2-pass mode on older
hardware.
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Test cases for PDCP with scattered input and output
buffers are added for both inplace and out of place scenarios.
1. input SG - output non SG
2. input and output both SG and inplace buffers
3. input and output both SG with different segment sizes
4. input SG and output non-SG
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
Adding basic framework to use snow3g f8 and f9 based
ciphering or integrity with direct crypto apis.
This patch does not support any combo usages yet.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch adds the stateful decompression feature
to the DPDK QAT PMD.
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
This patch fixes the aesni-gcm cryptodev documentation by
filling the lacked unsupported chained mbuf description.
Fixes: 6f16aab09a ("crypto/aesni_gcm: migrate to Multi-buffer library")
Cc: stable@dpdk.org
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
This patch removes an unwanted empty line in a sentence.
Fixes: 71afcefbd5 ("doc: update virtio ring size and header size")
Cc: stable@dpdk.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Document the packed virtqueue layout support in virtio net PMD.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Document the devargs for virtio-user and also make it clear
that these devargs are only available in virtio-user, i.e. not
supported by the PCI virtio driver.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The virtio_recv_mergeable_pkts_inorder() has been renamed to
virtio_recv_pkts_inorder() and added the non-mergeable support
in below commit.
Fixes: efcda13648 ("net/virtio: add non-mergeable support to in-order path")
Cc: stable@dpdk.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The Rx function that will be used when in-order is enabled
should be virtio_recv_mergeable_pkts_inorder() instead of
virtio_xmit_pkts_inorder().
Fixes: 8f3bd7e870 ("net/virtio: add in-order Rx/Tx into selection")
Cc: stable@dpdk.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The simple Tx path in virtio has been removed in below commit.
This patch removes an undefined function declaration of simple
Tx and all related descriptions in the doc.
Fixes: 57f818963d ("net/virtio: remove simple Tx path")
Cc: stable@dpdk.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The testpmd application provides two sets of commands for RX offload
flags configuration. The purpose of this patch is to eliminate this
duplication by removing the old set of commands:
“port config all crc-strip|scatter|rx-cksum|rx-timestamp|hw-vlan|
hw-vlan-filter|hw-vlan-strip|hw-vlan-extend on|off”
The other commands set that can be used instead in order to enable
or disable the same RX offloading flags on all RX queues of a port is:
"port config <port_id> rx_offload crc_strip|scatter|ipv4_cksum|
udp_cksum|tcp_cksum|timestamp|vlan_strip|vlan_filter|vlan_extend on|off"
This patch also fixes the "drop-en" command, which enables packets
dropping on all RX queues of all ports when no receive buffers available
“port config all drop-en on|off”
Fixes: 384161e006 ("app/testpmd: adjust on the fly VLAN configuration")
Cc: stable@dpdk.org
Signed-off-by: Flavia Musatescu <flavia.musatescu@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Start a new release cycle with empty release notes.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
This patch for DPDK Contributor's Guidelines indicates the repos
against which a new PMD should be prepared; for example, for new
network ethernet PMDs it should be dpdk-next-net, and for new crypto
PMDs it should be dpdk-next-crypto. For other new PMDs, the
contributor should refer to the MAINTAINERS file. Though this may seem
obvious, it is not mentioned in DPDK documentation.
Signed-off-by: Rami Rosen <ramirose@gmail.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Last contribution, last commit closing the release.
Thank you Rami, you will be missed.
It may be needed by the user to limit the LRO session packet size.
In order to allow the above limitation, a new Rx configuration may be
added for the maximum LRO session size.
A new capability may be added too to expose the maximum LRO session size
supported by the port.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Add new offload flags ``DEV_RX_OFFLOAD_RSS_HASH`` and
``DEV_RX_OFFLOAD_FLOW_MARK``.
Add new function ``rte_eth_dev_set_supported_ptypes`` to allow application
to set specific ptypes to be updated in ``rte_mbuf::packet_type``
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The function rte_eth_dev_count() was marked as deprecated in DPDK 18.05
in commit d9a42a69fe ("ethdev: deprecate port count function").
It is planned to be removed after the next LTS release.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
void return value is bad for get API (like rte_eth_dev_info-get())
since caller does not know if the function does its job or not and
output value is filled in.
void return value is bad for state changing API (like
rte_eth_promiscuous_enable()) since caller should use get API
to understand if state is really changed.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Tell users about upcoming changes to rte_ether_addr and
rte_ether_header.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
New accessors have been introduced to provide the hidden information.
This symbol can now be kept internal.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
This symbol has been deprecated for quite some time.
Let's drop it as soon as possible.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This symbol has been deprecated for quite some time.
Let's drop it as soon as possible.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Introduces the possible limitations on maximal Tx queue
size in descriptors if Tx inline data are enabled.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
This patch updates mlx5 documentation in parts:
- txq_inline_min parameter is described in more details,
values are fixed
- maximal amount of segments in multi-segment packets.
Fixes: 38b4b397a5 ("net/mlx5: add Tx configuration and setup")
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Raslan Darawsheh <rasland@mellanox.com>
Added a note to the getting started guides about patching third
party libraries/dependencies to avoid any known vulnerabilities.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
As legacy filter API "filter_ctrl" is superseded since 2017
by the rte_flow API, and got the deprecated attribute in DPDK 19.05,
it is time to remove the associated features from the matrix.
Not documenting deprecated features as supported will avoid confusion.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add firmware config for MPLS and DevX (required by LRO and DR).
Add a table for queue offloads requirements.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Raslan Darawsheh <rasland@mellanox.com>
Some details about libibverbs were missing:
- automatic detection by meson
- main ways to access the device
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Raslan Darawsheh <rasland@mellanox.com>
It is not needed to use "console" syntax highlighting
for literal blocks.
The file is easier to read by removing the code-block lines
and simply having double colons in previous line.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Raslan Darawsheh <rasland@mellanox.com>
These are simple fixes of punctuation, anchor placement
or wording.
The table format is fixed to avoid having a long line
in the first column.
Fixes: 909be50a34 ("doc: update Mellanox guides and release notes")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Raslan Darawsheh <rasland@mellanox.com>
The command mlxconfig was not enough explained and too much verbose
at the same time.
The syntax is now explained in introduction before listing the options,
without repeating the commands.
Some options, which are explained elsewhere in the doc,
are added to this list.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Raslan Darawsheh <rasland@mellanox.com>
This patch fixes the default settings for packet size to inline
with Enhanced Multi-Packet Write feature, allowing 256B packets
to be inlined with Out-Of-the-Box settings.
Fixes: 50724e1bba ("net/mlx5: update Tx definitions")
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Add tested Marvell integrated NIC platforms to v19.08 release note.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Fix the following doc build warning by correcting path.
doc/guides/rel_notes/release_18_05.rst:285:
WARNING: unknown document: ../rawdevs/ifpga_rawdev
Fixes: 473c88f9b3 ("drivers/raw: remove rawdev from directory names")
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Add tested Intel platforms with Intel NICs to v19.08 release note.
Signed-off-by: Wenjie Li <wenjiex.a.li@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Flow control was not documented as a supported feature
since the first fill of features matrix for mlx drivers.
Flow API and CRC offload flag support in mlx4 were missing in the
feature matrix when they were implemented (see below commits).
Fixes: 46d5736a70 ("net/mlx4: support basic flow items and actions")
Fixes: ce07b1514d ("net/mlx4: fix CRC stripping capability report")
Fixes: e86b85ca75 ("doc: fill nics features matrix for mlx")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Matan Azrad <matan@mellanox.com>
The backup maintainer role is not explicitly used in the file MAINTAINERS.
Listing names in a priority order is preferred and more flexible
than explicit named roles.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
The driver names for rawdevs were both different in make and meson builds
and were non-standard in the make version in that some included "rawdev" in
the name while others didn't.
Therefore, for global consistency of naming, we can use "rte_rawdev" rather
than "rte_pmd" for the prefix for the libraries. While most other driver
categories use "rte_pmd" as a prefix, there is precedent for this in the
mempool drivers use "rte_mempool" as a prefix.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The ifpga and skeleton rawdev drivers included "rawdev" in their directory
names, which was superfluous given that they were in the drivers/raw
directory. Shorten the names via this patch.
For meson builds, this will rename the final library .so/.a files
produced, but those will be renamed again later via a patch to
standardize rawdev names.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
When IOMMU is not available, /sys/kernel/iommu_groups will not be
populated. This is happening since at least 3.6 when VFIO support
was added. If the directory is empty, EAL should not pick IOVA as
VA as the default IOVA mode.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: Jerin Jacob <jerinj@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
When LRO offload is configured in Rx queue, the HW may coalesce TCP
packets from same TCP connection into single packet.
In this case the SW should fix the relevant packet headers because
the HW doesn't update them according to the new created packet
characteristics but provides the update values in the CQE.
Add update header code to the regular Rx burst function to support LRO
feature.
Make sure the first mbuf has enough space to include each TCP header,
otherwise the header update may cross mbufs what complicates the
operation too match.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Patch [1] zeroes the mbuf headroom when the port is configured with LRO
because when working with more than one stride per packet the HW cannot
guaranty an headroom in the start stride of each packet.
Change the solution to support mbuf headroom by adding an empty buffer
as the first packet segment, scatter mode must be enabled to support it.
[1] http://patches.dpdk.org/patch/56912/
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Fix license from BSD-2-Clause to BSD-3-Clause since the file was
lost on the driver license change.
Bump copyright year.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Adding support to parse GRE KEY for octeontx2 Flow.
Matching on GRE Key will only work, if checksum and routing
bits in the GRE header are equal to 0.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Update release notes for recently supported features in IPsec library and
IPsec Security Gateway application.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
LRO packet may consume all the stride memory, hence the PMD cannot
guaranty head-room for the LRO mbuf.
The issue is lack in HW support to write the packet in offset from the
stride start.
A new striding RQ feature may be added in CX6 DX to allow head-room and
tail-room for the LRO strides.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Use DevX API to read device LRO capabilities.
Check if LRO is supported and can be enabled.
Check if MPRQ is supported and can be used.
Enable MPRQ for LRO use if not enabled by user.
Added note for mlx5_mprq_enabled(), to emphasize that LRO
enables MPRQ.
Disable CQE compression and CRC stripping if LRO is enabled.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Add command-line argument to set LRO session timeout.
Add LRO settings struct in PMD configuration struct.
Add support of LRO offload in port configuration.
Add macros and function to check if LRO is supported and enabled.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
This patch introduces new mlx5 PMD devarg options:
- txq_inline_min - specifies minimal amount of data to be inlined into
WQE during Tx operations. NICs may require this minimal data amount
to operate correctly. The exact value may depend on NIC operation
mode, requested offloads, etc.
- txq_inline_max - specifies the maximal packet length to be completely
inlined into WQE Ethernet Segment for ordinary SEND method. If packet
is larger the specified value, the packet data won't be copied by the
driver at all, data buffer is addressed with a pointer. If packet
length is less or equal all packet data will be copied into WQE.
- txq_inline_mpw - specifies the maximal packet length to be completely
inlined into WQE for Enhanced MPW method.
Driver documentation is also updated.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
This patch removes the existing Tx datapath code
as preparation step before introducing the new
implementation. The following entities are being
removed:
- deprecated devargs support
- tx_burst() routines
- related PRM definitions
- SQ configuration code
- Tx routine selection code
- incompatible Tx completion code
The following devargs are deprecated and ignored:
- "txq_inline" is going to be converted to "txq_inline_max"
for compatibility issue
- "tx_vec_en"
- "txqs_max_vec"
- "txq_mpw_hdr_dseg_en"
- "txq_max_inline_len" is going to be converted
to "txq_inline_mpw" for compatibility issue
The deprecated devarg keys are recognized by PMD
and ignored/converted to the new ones in order not
to block device probing.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Adding support for ipv6_ext header parsing in the octeontx2 flow.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Some configuration options can not be tested properly with testpmd
because it automatically starts all ports. This makes it harder
to test driver handling of configuration options:
(for example rx_deferred_start).
Add new command line flag --disable-device-start which skips
the device start. The port can then be started manually later.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
With the latest published interface of
rte_eal_hotplug_[add,remove](), and rte_eth_dev_close(),
rte_eth_dev_close() would cleanup all the data structures of
port's eth dev leaving the device common resource intact
if RTE_ETH_DEV_CLOSE_REMOVE is set in dev flags.
So a new command "detach device" (~hotplug remove) to work,
with device identifier like "port attach" is added
to be able to detach closed devices.
Also to display currently probed devices, another command
"show device info <identifier>|all" is also added as a
part of this change.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch intend to support
action_raw_encap/decap [1] in a generic and convenient way.
Two new commands - set raw_encap, set raw_decap are introduced just
like the other commands for encap/decap, i.e. set vxlan.
These two commands have corresponding global buffers
which can be used by PMD as the input buffer for raw encap/decap.
The commands use the rte_flow pattern syntax to help user build the
raw buffer in a convenient way.
A common way to use it:
- encap matched egress packet with VxLAN tunnel:
testpmd> set raw_encap eth src is 10:11:22:33:44:55 / vlan tci is 1
inner_type is 0x0800 / ipv4 / udp dst is 4789 / vxlan vni
is 2 / end_set
testpmd> flow create 0 egress pattern eth / ipv4 / end actions
raw_encap / end
- decap l2 header and encap GRE tunnel on matched egress packet:
testpmd> set raw_decap eth / end_set
testpmd> set raw_encap eth dst is 10:22:33:44:55:66 / ipv4 / gre
protocol is 0x0800 / end_set
testpmd> flow create 0 egress pattern eth / ipv4 / end actions
raw_decap / raw_encap / end
- decap VxLAN tunnel and encap l2 header on matched ingress packet:
testpmd> set raw_encap eth src is 10:11:22:33:44:55 type is 0x0800 /
end_set
testpmd> set raw_decap eth / ipv4 / udp / vxlan / end_set
testpmd> flow create 0 ingress pattern eth / ipv4 / udp dst is 250 /
vxlan vni is 0x1234 / ipv4 / end actions raw_decap /
raw_encap / queue index 1 / mark id 0x1234 / end
[1] http://mails.dpdk.org/archives/dev/2018-October/116092.html
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Previously in the PCAP PMD queues has to be defined as RxQ and TxQ
pairs, even if the need is only Rx or only Tx:
"--vdev net_pcap0,tx_pcap=tx.pcap,rx_pcap=rx.pcap"
Following commit enabled only providing Rx queue, and if Tx queue is
not provided PMD drops the Tx packets automatically:
Commit a3f5252e5c ("net/pcap: enable infinitely Rx a pcap file")
"--vdev net_pcap0,rx_pcap=rx.pcap"
This commit enables same thing for Rx queue, user no more have to
provide a Rx queue (rx_iface or rx_pcap), for this case a dummy Rx
burst function is used which doesn't return any packet at all:
"--vdev net_pcap0,tx_pcap=tx.pcap"
This makes only saving packets to a pcap file use case easy.
When both Rx and Tx queues are missing PMD will return an error.
(Single interface is still supported: "--vdev net_pcap0,iface=eth0")
Signed-off-by: Aideen McLoughlin <aideen.mcloughlin@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
All the DV counters are cashed in the PMD memory and are contained in
pools which are contained in containers according to the counters
allocation type - batch or single.
Currently, the flow counter query is done synchronously in pool
resolution means that on the user request a FW command is triggered to
read all the counters in the pool.
A new feature of devX to asynchronously read batch of flow counters
allows to accelerate the user query operation.
Using the DPDK host thread, the PMD periodically triggers asynchronous
query in pool resolution for all the counter pools and an interrupt is
triggered by the FW when the values are updated.
In the interrupt handler the pool counter values raw data is replaced
using a double buffer algorithm (very fast).
In the user query, the PMD just returns the last query values from the
PMD cache - no system-calls and FW commands are triggered from the user
control thread on query operation!
More synchronization is added with the host thread:
Container resize uses double buffer algorithm.
Pools growing in container uses atomic operation.
Pool query buffer replace uses a spinlock.
Pool minimum devX counter ID uses atomic operation.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Enabled IP-in-IP tunnel type support on DV/DR flow engine.
This includes the following combination:
- IPv4 over IPv4
- IPv4 over IPv6
- IPv6 over IPv4
- IPv6 over IPv6
MLX5 NIC supports IP-in-IP tunnel via FLEX Parser so
need to make sure fw using FLEX Paser profile 0.
mlxconfig -d <mst device> -y set FLEX_PARSER_PROFILE_ENABLE=0
The example testpmd commands would be:
- Match on IPv4 over IPv4 packets and do inner RSS:
testpmd> flow create 0 ingress pattern eth / ipv4 proto is 0x04 /
ipv4 / udp / end actions rss level 2 queues 0 1 2 3 end / end
- Match on IPv6 over IPv4 packets and do inner RSS:
testpmd> flow create 0 ingress pattern eth / ipv4 proto is 0x29 /
ipv6 / udp / end actions rss level 2 queues 0 1 2 3 end / end
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
queue= parameter does not exist.
It might have been the previous name of the queue_count parameter, but
anyway, the default value 1 for the number of queues works fine.
Fixes: f1debd77ef ("net/af_xdp: introduce AF_XDP PMD")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Support matching on the present bits (C,K,S)
as well as the optional key field.
If the rte_flow_item_gre_key is specified in pattern,
it will set K present match automatically.
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
When OS package is not provided driver silently goes into safe mode,
since safe mode is missing most of advanced features, this may confuse
the users.
Instead of going into safe mode silently, add devarg for safe mode
enabling only for users that are asking for it.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Ray Kinsella <ray.kinsella@intel.com>
Remove devarg "max_queue_pair_num" related code since
it is not complete implemented.
Fixes: f9cf4f8641 ("net/ice: support device initialization")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Adding PF and VF action support for octeontx2 flow driver.
If RTE_FLOW_ACTION_TYPE_PF action is set from VF, then the packet
will be sent to the parent PF.
If RTE_FLOW_ACTION_TYPE_VF action is set and original is specified,
then the packet will be sent to the original VF, otherwise the packet
will be sent to the VF specified in the vf_id.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
When bus layer reports the preferred mode as RTE_IOVA_DC then
select the RTE_IOVA_VA mode:
- All drivers work in RTE_IOVA_VA mode, irrespective of physical
address availability.
- By default, a mempool asks for IOVA-contiguous memory using
RTE_MEMZONE_IOVA_CONTIG. This is slow in RTE_IOVA_PA mode and it
may affect the application boot time.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
The incriminated commit broke the use of RTE_PCI_DRV_IOVA_AS_VA which
was intended to mean "driver only supports VA" but had been understood
as "driver supports both PA and VA" by most net drivers and used to let
dpdk processes to run as non root (which do not have access to physical
addresses on recent kernels).
The check on physical addresses actually closed the gap for those
drivers. We don't need to mark them with RTE_PCI_DRV_IOVA_AS_VA and this
flag can retain its intended meaning.
Document explicitly its meaning.
We can check that a driver requirement wrt to IOVA mode is fulfilled
before trying to probe a device.
Finally, document the heuristic used to select the IOVA mode and hope
that we won't break it again.
Fixes: 703458e19c ("bus/pci: consider only usable devices for IOVA mode")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Tested-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Remove unused macros from the library, and update release
notes.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Abraham Tovar <abrahamx.tovar@intel.com>
Signed-off-by: Lukasz Krakowiak <lukaszx.krakowiak@intel.com>
This patch updates the constant names and function names used
in code snippets in the Compression Device Library documentation.
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
This patch changes the key pointer data types in cipher, auth,
and aead xforms from "uint8_t *" to "const uint8_t *" for a
more intuitive and safe sessionn creation.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Liron Himi <lironh@marvell.com>
This patch adds a benchmark part to
compression-perf-tool as a separate test case, which can be
executed multi-threaded.
Also updates release notes.
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Artur Trybula <arturx.trybula@intel.com>
Acked-by: Shally Verma <shallyv@marvell.com>
This patch adds --ptest option to make possible to choose
test case from command line.
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Artur Trybula <arturx.trybula@intel.com>
Acked-by: Shally Verma <shallyv@marvell.com>
Add LBK HW block abstraction details and the application
usage models.
This patch also updates missing DPI HW block to DPDK
subsystem mapping as well.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Some machine (like on dpdk.org) may fail to build the prog guide PDF
because of a table characher being "+" instead of "|".
Some figure references are also fixed with automatic numbering.
Fixes: 3f3f608142 ("doc: update bbdev guide for 5GNR operations")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Once the library usage is over, it must be deinitialized which
will free the shared memory reserved during initialization.
Observed an issue while running 'metrics_autotest' continuously
without quiting. For the first run 'metrics_autotest' passes
all test cases but second run onwards first test case fails
because metrics library is already initialized during first run.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
va2pa depends on the physical address and virtual address offset of
current mbuf. It may get the wrong physical address of next mbuf which
allocated in another hugepage segment.
In rte_mempool_populate_default(), trying to allocate whole block of
contiguous memory could be failed. Then, it would reserve memory in
several memzones that have different physical address and virtual address
offsets. The rte_mempool_populate_default() is used by
rte_pktmbuf_pool_create().
Fixes: 8451269e6d ("kni: remove continuous memory restriction")
Cc: stable@dpdk.org
Signed-off-by: Yangchao Zhou <zhouyates@gmail.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Update KNI documentation to reflect current ethtool support.
Replace references to out dated tools (ifconfig) with
modern iproute2. Tshark is a better replacement for tcpdump.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Update platform support of CNF95xx in documentation and
also, update the HW cap based on PCI subsystem id and revision id.
This patch also changes HW capability handling to be based on
PCI Revision ID. PCI Revision ID contains a unique identifier
to identify chip, major and minor revisions.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
The pdump tool works as the secondary process. When the primary process
exits and the residual secondary process keeps running, it will make the
primary process can't start up again. Since the ex-fbarry files are still
attached by the secondary process pdump, the 'new' primary process can't
get these files locked.
The patch is to set up an alarm which runs every 0.5s periodically
to monitor the primary process in the pdump. Once the primary exits,
so will the pdump.
Signed-off-by: Suanming Mou <mousuanming@huawei.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
This patch implements a separate FIFO for each cpu core to improve the
previous functionality where anyone with access to the FIFO could affect
any core on the system. By using appropriate permissions, FIFO interfaces
can be configured to only affect the particular cores.
Because each FIFO is per core, the following fields have been removed
from the command JSON format: core_list, resource_id, name.
Signed-off-by: Lukasz Krakowiak <lukaszx.krakowiak@intel.com>
Signed-off-by: Lukasz Gosiewski <lukaszx.gosiewski@intel.com>
Signed-off-by: Marcin Hajkowski <marcinx.hajkowski@intel.com>
Tested-by: David Hunt <david.hunt@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
The unicode characters to draw the debugfs tree
may fail with some Latex distributions.
These characters are replaced with some ASCII equivalents.
Fixes: 14ad4f0184 ("doc: add Marvell OCTEON TX2 platform guide")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Jerin Jacob <jerinj@marvell.com>
The command "make doc-guides-pdf" is failing because
there are more than 1500 lines in the file MAINTAINERS
which is included in the contributing guide.
We are facing the issue mentioned in this comment:
https://github.com/sphinx-doc/sphinx/issues/3099#issuecomment-256440704
Anyway the file MAINTAINERS is mentioned several times in the guide.
So the "literalinclude" is removed from the guide to fix the build
of the PDF.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Support matching on GRE key and present bits (C,K,S)
Example testpmd command could be:
testpmd>flow create 0 ingress group 1 pattern eth / ipv4 /
gre / gre_key value is 0x12345678 / end
actions rss queues 1 0 end / mark id 196 / end
Which will match GRE packet with k present bit set and key value is
0x12345678.
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Add new rte_flow_item_gre_key in order to match the optional key field.
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
On DV/DR flow engine, MLX5 can match on ICMP/ICMP6's code and type field
via FLEX Parser, which can be enabled by config FW using FLEX Parser
profile 2:
mlxconfig -d <mst device> -y set FLEX_PARSER_PROFILE_ENABLE=2
The testpmd commands could be:
testpmd> flow create 0 ingress pattern eth / ipv4 /
icmp type is 8 code is 0 / end
actions rss queues 0 1 end / end
testpmd> flow create 0 ingress pattern eth / ipv6 /
icmp6 type is 128 code is 0 / end
actions rss queues 0 1 end / end
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
I modified the API config file to incorporate a search button into the
API documentation page.
Signed-off-by: Aideen McLoughlin <aideen.mcloughlin@intel.com>
The APIs in the rte_bus_vdev.h file were not part of the API
documentation. I added this header file to the doxygen config file with
the name vdev.
Signed-off-by: Aideen McLoughlin <aideen.mcloughlin@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Since dpdksummit.com does not exist anymore,
the old link redirected to https://www.dpdk.org/events/.
Cc: stable@dpdk.org
Signed-off-by: Ali Alnubani <alialnu@mellanox.com>
The current implementation using the '__sync' built-ins to synchronize
statistics within worker threads. The '__sync' built-ins functions are
full barriers which will affect the performance, so add a per worker
packets statistics to remove the synchronisation between worker threads.
Since the maximum core number can get to 256, so disable the per core
stats print in default and add the --insight-worker option to enable it.
For example:
sudo examples/packet_ordering/arm64-armv8a-linuxapp-gcc/packet_ordering \
-l 112-115 --socket-mem=1024,1024 -n 4 -- -p 0x03 --insight-worker
RX thread stats:
- Pkts rxd: 226539223
- Pkts enqd to workers ring: 226539223
Worker thread stats on core [113]:
- Pkts deqd from workers ring: 77557888
- Pkts enqd to tx ring: 77557888
- Pkts enq to tx failed: 0
Worker thread stats on core [114]:
- Pkts deqd from workers ring: 148981335
- Pkts enqd to tx ring: 148981335
- Pkts enq to tx failed: 0
Worker thread stats:
- Pkts deqd from workers ring: 226539223
- Pkts enqd to tx ring: 226539223
- Pkts enq to tx failed: 0
TX stats:
- Pkts deqd from tx ring: 226539223
- Ro Pkts transmitted: 226539168
- Ro Pkts tx failed: 0
- Pkts transmitted w/o reorder: 0
- Pkts tx failed w/o reorder: 0
Suggested-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Currently PKT_TX_IP_CKSUM is being set into mbuf->ol_flags
during fragmentation and reassemble operation implicitly.
Because of this, application is forced to use checksum offload
whether it is supported by platform or not.
Also documentation does not provide any expected value of ol_flags
in returned mbuf (reassembled or fragmented) so application will never
come to know that which offloads are enabled. So transmission may be failed
for the platforms which does not support checksum offload.
Also, IPv6 does not contain any checksum field in header so setting
mbuf->ol_flags with PKT_TX_IP_CKSUM is itself invalid.
So removing mentioned flag from the library.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
If there are multiple threads contending, they all attempt to take the
spinlock lock at the same time once it is released. This results in a
huge amount of processor bus traffic, which is a huge performance
killer. Thus, if we somehow order the lock-takers so that they know who
is next in line for the resource we can vastly reduce the amount of bus
traffic.
This patch added MCS lock library. It provides scalability by spinning
on a CPU/thread local variable which avoids expensive cache bouncings.
It provides fairness by maintaining a list of acquirers and passing the
lock to each CPU/thread in the order they acquired the lock.
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Steve Capper <steve.capper@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
This patch updates the ipsec-secgw application to support
header reconstruction. In addition a series of tests have
been added to prove the implementation's correctness.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This now includes steps to build with either
libraries for AVX2, or AVX512 or no dependency.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
Implementation still based on Intel SDK libraries
optimized for AVX512 instructions set and 5GNR.
This can be also build for AVX2 for 4G capability or
without SDK dependency for maintenance.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
The documentation captures the related change in
BBDEV API to support 5GNR encode/decode operations.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
Extension to BBDEV operations to support 5G
on top of existing 4G operations.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
This patch adds condition to be met when using
out-of-place auth-cipher operations. It checks
if the digest location overlaps with the data to
be encrypted or decrypted and if so, treats as a
digest-encrypted case.
Patch adds checking, if the digest is being
encrypted or decrypted partially and extends PMD
buffers accordingly.
It also adds feature flag for QuickAssist
Technology to emphasize it's support for digest
appended auth-cipher operations.
Signed-off-by: Damian Nowak <damianx.nowak@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Some PMDs can only support digest being
encrypted separately in auth-cipher operations.
Thus it is required to add feature flag in PMD
to reflect if it does support digest-appended
both: digest generation with encryption and
decryption with digest verification.
This patch also adds information about new
feature flag to the release notes.
Signed-off-by: Damian Nowak <damianx.nowak@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Add optional ability to fragment packet bigger then mtu,
and reassemble fragmented packet.
To minimize possible performance effect, reassembly is
implemented as RX callback.
To support these features ipsec-secgw relies on librte_ipsec ability
to handle multi-segment packets.
Also when reassemble/fragmentation support is enabled, attached
crypto devices have to support 'In Place SGL' offload capability.
To enable/disable this functionality, two new optional command-line
options are introduced:
--reassemble <val> - number of entries in reassemble table
--mtu <val> - MTU value for all attached ports
As separate '--mtu' option is introduced, '-j <val>' option is now used
to specify mbuf data buffer size only.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add support for packets that consist of multiple segments.
Take into account that trailer bytes (padding, ESP tail, ICV)
can spawn across multiple segments.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Adding a new field, ff_disable, to allow applications to control the
features enabled on the crypto device. This would allow for efficient
usage of HW/SW offloads.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Fixed some typos and clarified how errors on ops which
fail to get submitted on the enqueue API should be handled.
Fixes: a584d3bea9 ("doc: add compressdev library guide")
Cc: stable@dpdk.org
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Shally Verma <shallyv@marvell.com>
A bad formula was copied and pasted.
Fixes: 4935e1e9f7 ("bbdev: introduce wireless base band device lib")
Fixes: 0318c02b57 ("doc: add cryptodev chapter in prog guide")
Fixes: a9bb0c44c7 ("doc: add rawdev library guide and doxygen page")
Cc: stable@dpdk.org
Signed-off-by: Thierry Herbelot <thierry.herbelot@6wind.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
- Include list of supported adapters.
- Include list of supported features.
- Document requirements for vector mode PMD.
- Remove obsolete limitation (scatter rx has been supported for
some time).
- Fixed broken links.
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
This commit removes the support of configuring the device E-switch
using TCF since it is now possible to configure it via DR (direct
verbs rules), and by that to also remove the PMD dependency in libmnl.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
This patch implements rx interrupts feature required for power
saving. These interrupts can be enabled/disabled on demand.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add MTU set operation and MTU update feature.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add device start operation and update the correct
function pointers for Rx and Tx burst functions.
This patch also update the octeontx2 NIC specific documentation.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Add vector version of packet Receive function.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Support setting up VLAN filters so as to allow tagged
packet's reception after VLAN HW Filter offload is enabled.
Signed-off-by: Vivek Sharma <viveksharma@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Support configuring VLAN offloads for an ethernet device and
dynamic promiscuous mode configuration for VLAN filters where
filters are updated according to promiscuous mode of the device.
Signed-off-by: Vivek Sharma <viveksharma@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add remaining PTP configuration/slowpath operations.
Timesync feature is available only for PF devices.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Signed-off-by: Zyta Szpak <zyta@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add flow control operations and exposed
otx2_nix_update_flow_ctrl_mode() to enable on the
configured mode in dev_start().
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Add Rx and Tx queue descriptor related operations.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
The fields from CQE needs to be converted to
ptype and rx ol flags in mbuf. This patch adds
create lookup memory for those items to be
used in Fastpath.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Add queue start and stop operations. Tx queue needs
to update the flow control value, Which will be
added in sub subsequent patch.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Add RSS support and expose RSS related functions
to implement RSS action for rte_flow driver.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Add unicast MAC filter for PF device and
update the respective feature list.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add promiscuous and allmulticast mode for PF devices and
update the respective feature list.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add basic stat operation and updated the feature list.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Add link stats related operations and mark respective
items in the documentation.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Add register dump support and mark Registers dump in features.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Adding bare minimum PMD library and doc build infrastructure
and claim the maintainership for octeontx2 PMD.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
In current implementation, an action which requires parameters
must accept them enclosed in a structure.
Some actions require a single, trivial type parameter, but it still
must be enclosed in a structure.
This obligation results in multiple, action-specific structures, each
containing a single trivial type parameter.
This patch introduces a new approach, allowing an action configuration
object of any type, trivial or a structure.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This patch implements additional actions of packet header
modifications.
Add actions:
- INC_TCP_SEQ - Increase sequence number in the outermost TCP header.
- DEC_TCP_SEQ - Decrease sequence number in the outermost TCP header.
- INC_TCP_ACK - Increase acknowledgment number in the outermost TCP
header.
- DEC_TCP_ACK - Decrease acknowledgment number in the outermost TCP
header.
Original work by Xiaoyu Min.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Add actions:
- INC_TCP_SEQ - Increase sequence number in the outermost TCP header.
- DEC_TCP_SEQ - Decrease sequence number in the outermost TCP header.
- INC_TCP_ACK - Increase acknowledgment number in the outermost TCP
header.
- DEC_TCP_ACK - Decrease acknowledgment number in the outermost TCP
header.
Original work by Xiaoyu Min.
This patch uses the new approach introduced by [1], using a new
macro ARG_ENTRY_HTON to pass a single integer argument to each of
the new actions.
[1] http://patches.dpdk.org/patch/55882/
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Add actions:
- INC_TCP_SEQ - Increase sequence number in the outermost TCP header.
- DEC_TCP_SEQ - Decrease sequence number in the outermost TCP header.
- INC_TCP_ACK - Increase acknowledgment number in the outermost TCP
header.
- DEC_TCP_ACK - Decrease acknowledgment number in the outermost TCP
header.
Original work by Xiaoyu Min.
This patch uses the new approach introduced by [1], using a simple
integer instead of using an action-specific structure for each of
the new actions.
[1] http://patches.dpdk.org/patch/55882/
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This feature was added in the following commit:
commit a3f5252e5c ("net/pcap: enable infinitely Rx a pcap file")
Signed-off-by: Cian Ferriter <cian.ferriter@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The latest versions of meson don't build targets when build_by_default is
false but install is true, unlike older versions. We can fix this by having
both build_by_default and install settings come from the build-time option.
Bugzilla ID: 303
Fixes: d02a2dab2d ("doc: support building HTML guides with meson")
Fixes: 720b14db3a ("build: generate API documentation with meson")
Cc: stable@dpdk.org
Reported-by: Ali Alnubani <alialnu@mellanox.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Now that everything that has ever accessed the shared memory
config is doing so through the public API's, we can make it
internal. Since we're removing quite a few headers from
rte_eal_memconfig.h, we need to add them back in places
where this header is used.
This bumps the ABI, so also change all build files and make
update documentation.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: David Marchand <david.marchand@redhat.com>
Enable an example for rawdev ntb. Support interactive mode to send
file on one host and receive file from another host. The command line
would be 'send [filepath]' and 'receive [filepath]'.
But since the FIFO is not enabled right now, use rte_memcpy as the enqueue
and dequeue functions and only support transmitting file no more than 4M.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Add handshake process using doorbell so that two hosts can
communicate to start and stop.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Add in the list of registers for the device.
And enable NTB device ops for Intel Skylake platform.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Introduce rawdev driver support for NTB (Non-transparent Bridge) which
can help to connect two separate hosts with each other.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Update the devbind script with new section of DMA devices, also
added OCTEONTX2 DMA device ID to DMA device list
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Sample test to verify DMA functionality, this test covers
internal transfer mode.
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Register dev_configure API to configure DPI PCI devices.
After successful initialization send message to PF to open
corresponding DPI DMA queue. At present hardware doesn't
support mail box for DPI, so PMD to PF communication uses
pre build kernel devfs.
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Add the make and meson based build infrastructure along
with the DMA device probe with documentation infrastructure.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
The mempool library assigns handler ops indexes based on the dynamic load
order of mempool handlers. Indexes are used so a mempool can be used by
multiple processes, but this only works if all processes agree on the
mapping from index to mempool handler.
When using the '-d' argument, it's possible for different processes to load
mempool handlers in different orders, and thus have different
index->handler mappings. Using a mempool in multiple of such processes will
result in undefined behavior.
This commit adds a note to the mempool library programmer's guide warning
users against this.
Fixes: 449c49b93a ("mempool: support handler operations")
Cc: stable@dpdk.org
Signed-off-by: Gage Eads <gage.eads@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add local APIs to trigger data copies, and retrieve handle values once
those copies are completed. Included are unit tests to validate the data
is copies correctly.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Jiayu Hu <jiayu.hu@intel.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
Add stats functions to track what is happening in the driver, and put
unit tests to check those.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Jiayu Hu <jiayu.hu@intel.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
Allow initializing a driver instance. Include selftest to validate these
functions.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Jiayu Hu <jiayu.hu@intel.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
Add in the "info_get" function to the driver, to allow us to query the
device. This allows us to have the unit test pick up the presence of
supported hardware or not.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Jiayu Hu <jiayu.hu@intel.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
Add the create/destroy driver functions so that we can actually allocate
a rawdev and destroy it when done. No rawdev API functions are actually
implemented at this point.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Jiayu Hu <jiayu.hu@intel.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
In order to allow binding/unbinding of devices for use by the
ioat_rawdev, we need to update the devbind script to add a new class
of device, and add device ids for the specific HW instances.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Jiayu Hu <jiayu.hu@intel.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
Add stubs for ioat rawdev driver support in DPDK, specifically:
* makefile and meson build hooks
* initial public header file
* rawdev main C file, with probe and release functions
* release note update announcing the driver
* initial documentation for the new section in the rawdev doc
* unit test stubs for device unit tests
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Jiayu Hu <jiayu.hu@intel.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
This patch adds ice_flow_create, ice_flow_destroy,
ice_flow_flush and ice_flow_validate support,
these are used to handle all the generic filters.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add devargs to control each event timer adapter i.e. TIM rings internal
parameters uniquely. The following dict format is expected
[ring-chnk_slots-disable_npa-stats_ena]. 0 represents default values.
Example:
--dev "0002:0e:00.0,tim_ring_ctl=[2-1023-1-0]"
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Add devargs to limit the max number of TIM rings reserved on probe.
Since, TIM rings are HW resources we can avoid starving other
applications by not grabbing all the rings.
Example:
--dev "0002:0e:00.0,tim_rings_lmt=2"
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Add event timer adapter statistics get and reset functions.
Stats are disabled by default and can be enabled through devargs.
Example:
--dev "0002:0e:00.0,tim_stats_ena=1"
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Add devargs support to modify number of chunk slots. Chunks are used to
store event timers, a chunk can be visualised as an array where the last
element points to the next chunk and rest of them are used to store
events. TIM traverses the list of chunks and enqueues the event timers
to SSO.
If no argument is passed then a default value of 255 is taken.
Example:
--dev "0002:0e:00.0,tim_chnk_slots=511"
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
If the chunks are allocated from NPA then TIM can automatically free
them when traversing the list of chunks.
Add devargs to disable NPA and use software mempool to manage chunks.
Example:
--dev "0002:0e:00.0,tim_disable_npa=1"
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Add selftest to verify sanity of SSO.
Can be run by passing devargs to SSO PF as follows:
Example:
--dev "0002:0e:00.0,selftest=1"
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
SSO GGRPs i.e. queue uses DRAM & SRAM buffers to hold in-flight
events. By default the buffers are assigned to the SSO GGRPs to
satisfy minimum HW requirements. SSO is free to assign the remaining
buffers to GGRPs based on a preconfigured threshold.
We can control the QoS of SSO GGRP by modifying the above mentioned
thresholds. GGRPs that have higher importance can be assigned higher
thresholds than the rest.
Example:
--dev "0002:0e:00.0,qos=[1-50-50-50]" // [Qx-XAQ-TAQ-IAQ]
Qx -> Event queue Aka SSO GGRP.
XAQ -> DRAM In-flights.
TAQ & IAQ -> SRAM In-flights.
The values need to be expressed in terms of percentages, 0 represents
default.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Octeontx2 SSO by default is set to use dual workslot mode.
Add devargs option to force legacy mode i.e. single workslot mode.
Example:
--dev "0002:0e:00.0,single_ws=1"
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
The number of events for a *open system* event device is specified
as -1 as per the eventdev specification.
Since, Octeontx2 SSO inflight events are only limited by DRAM size, the
xae_cnt devargs parameter is introduced to provide upper limit for
in-flight events.
Example:
--dev "0002:0e:00.0,xae_cnt=8192"
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add the make and meson based build infrastructure along with the
eventdev(SSO) device probe.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Replace the mbuf pointer array in the event eth Rx adapter
callback with an event array. Using an event array allows
the application to change attributes of the events enqueued
by the SW adapter.
The callback can drop packets and populate a callback
argument with the number of dropped packets. Add a Rx adapter
stats field to keep track of the total number of dropped packets.
This commit removes the experimental tags from
the callback and stats APIs, the experimental tag from eventdev
is also removed and eventdev functions become part of the
main DPDK API/ABI.
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
When configuring with meson we print out a list of enabled components, but
it is also useful to list out the disabled components and the reasons why.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Update doc the match with code.
Fixes: 81f7ecd9 ("examples: use factorized default Rx/Tx configuration")
Cc: stable@dpdk.org
Signed-off-by: Bao-Long Tran <longtb5@viettel.com.vn>
The function rte_malloc_set_limit was defined but never implemented.
Mark it as deprecated for now, and remove in next release.
There is no point in keeping dead code.
"You Aren't Going to Need It"
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
This patch enables need_wakeup flag for Tx and fill rings, when this
flag is set by the driver, it means that the userspace application has
to explicitly wake up the kernel Rx or kernel Tx processing by issuing
a syscall. Poll() can wake up both and sendto() or its alternatives
will wake up Tx processing only.
This feature is to provide efficient support for case that application
and driver executing on the same core.
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
It can be useful to use pcap files for some rudimental performance
testing. This patch enables this functionality in the pcap driver.
At a high level, this works by creating a ring of sufficient size to
store the packets in the pcap file passed to the application. When the
rx function for this mode is called, packets are dequeued from the ring
for use by the application and also enqueued back on to the ring to be
"received" again.
A tx_drop mode is also added since transmitting to a tx_pcap file isn't
desirable at a high traffic rate.
Jumbo frames are not supported in this mode. When filling the ring at rx
queue setup time, the presence of multi segment mbufs is checked for.
The PMD will exit on detection of these multi segment mbufs.
Signed-off-by: Cian Ferriter <cian.ferriter@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add build and doc files along with hinic_pmd_ethdev.c
which just includes PMD register and log initialization
for compilation.
Signed-off-by: Ziyang Xuan <xuanziyang2@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
We had some inconsistencies between functions prototypes and actual
definitions.
Let's avoid this by only adding the experimental tag to the prototypes.
Tests with gcc and clang show it is enough.
git grep -l __rte_experimental |grep \.c$ |while read file; do
sed -i -e '/^__rte_experimental$/d' $file;
sed -i -e 's/ *__rte_experimental//' $file;
sed -i -e 's/__rte_experimental *//' $file;
done
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Add a function rte_rand_max() which generates an uniformly distributed
pseudo-random number less than a user-specified upper bound.
The commonly used pattern rte_rand() % SOME_VALUE creates biased
results (as in some values in the range are more frequently occurring
than others) if SOME_VALUE is not a power of 2.
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This commit replaces rte_rand()'s use of lrand48() with a DPDK-native
combined Linear Feedback Shift Register (LFSR) (also known as
Tausworthe) pseudo-random number generator.
This generator is faster and produces better-quality random numbers
than the linear congruential generator (LCG) of lib's lrand48(). The
implementation, as opposed to lrand48(), is multi-thread safe in
regards to concurrent rte_rand() calls from different lcore threads.
A LCG is still used, but only to seed the five per-lcore LFSR
sequences.
In addition, this patch also addresses the issue of the legacy
implementation only producing 62 bits of pseudo randomness, while the
API requires all 64 bits to be random.
This pseudo-random number generator is not cryptographically secure -
just like lrand48().
Bugzilla ID: 114
Bugzilla ID: 276
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Add new telemetry mode support for l3fwd-power.
This is a standalone mode, in this mode l3fwd-power
does simple l3fwding along with calculating
empty polls, full polls, and busy percentage for
each forwarding core. The aggregation of these
values of all cores is reported as application
level telemetry to metric library for every 500ms from the
master core.
The busy percentage is calculated by recording the poll_count
and when the count reaches a defined value the total
cycles it took is measured and compared with minimum and maximum
reference cycles and busy rate is set according to either 0% or
50% or 100%.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
telemetry has support for fetching port based stats
from metrics library.
Metrics library also has global stats which are
not fetched by telemetry, so extend telemetry to
fetch the global metrics.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Kevin Laatz <kevin.laatz@intel.com>
The EAL init diagram had a typo for "lauch"
instead of "launch".
Fixes: fc1f2750a3 ("doc: programmers guide")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Add a global function in the PMD which dumps debug information to
specific file.
The data can be printed in hexadecimal format or as regular string.
The number of debug files per PMD entity should be limited by a new PMD
probe parameter called max_dump_files_num.
The files will be created in the /var/log directory or in the current
directory.
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
To get the VF's link status by calling 'rte_eth_link_get_nowait()', the
VF not only check PF's physical link status, but also check the mailbox
running status. And mailbox checking will generate mailbox interrupt in
PF, it will be worse if many VFs are running in the system, the PF will
have to handle many interrrupts.
Normally, checking the PF's physical link status is enough for nowait.
For different scenarios, adding an 'pflink_fullchk' option to control
whether to check the link fully or not.
Fixes: 91546fb62e ("net/ixgbevf: fix link state")
Cc: stable@dpdk.org
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Scott Daniels <daniels@research.att.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The firmware in 1400 series VIC adapters which would support COUNT
flow action was postponed and reworked. The capability will be
re-added in a future release when the firmware is available.
This reverts the following commits.
commit 86df6c4e2f ("net/enic: support flow counter action")
commit 1b4ce87dc5 ("net/enic: fix counter action")
Cc: stable@dpdk.org
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Hyong Youb Kim <hyonkim@cisco.com>
Available link speeds are based on VIC adapter model, which is encoded
in PCI subsystem device ID.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
When Rx interrupts are disabled, we simply disable rearm when
the interrupt fires the next time. So, the next packet will
trigger interrupt (if it is not happened yet after previous Rx
burst processing).
Signed-off-by: Georgiy Levashov <georgiy.levashov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
This patch adds two parameters `start_queue` and `queue_count` to
specify the range of netdev queues used by AF_XDP pmd.
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Implement zero copy of af_xdp pmd through mbuf's external memory
mechanism to achieve high performance.
This patch also provides a new parameter "pmd_zero_copy" for user, so they
can choose to enable zero copy of af_xdp pmd or not.
To be clear, "zero copy" here is different from the "zero copy mode" of
AF_XDP, it is about zero copy between af_xdp umem and mbuf used in dpdk
application.
Suggested-by: Vipin Varghese <vipin.varghese@intel.com>
Suggested-by: Tummala Sivaprasad <sivaprasad.tummala@intel.com>
Suggested-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
This commit adds support to the bnxt PMD for devices
based on the BCM57508 "thor" Ethernet controller.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Shared memory packet interface (memif) PMD allows for DPDK and any other
client using memif (DPDK, VPP, libmemif) to communicate using shared
memory. The created device transmits packets in a raw format. It can be
used with Ethernet mode, IP mode, or Punt/Inject. At this moment, only
Ethernet mode is supported in DPDK memif implementation. Memif is Linux
only.
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Update HWRM API to version 1.10.0.74
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Use rxtx callback to demonstrate a way to use rte_eth_read_clock to
convert the hardware timestamps to an amount of cycles.
This allows to get the amount of time the packet spent since its entry
in the device. While the regular latency only shows the latency from
when it entered the software stack.
Signed-off-by: Tom Barbette <barbette@kth.se>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add rte_eth_read_clock to read the raw clock of a device.
The main use is to get the device clock conversion co-efficients to be
able to translate the raw clock of the timestamp field of the pkt mbuf
to a local synced time value.
This function was missing to allow users to convert the Rx timestamp
field to real time without the complexity of the rte_timesync* facility.
One can derivate the clock frequency by calling twice read_clock and
then keep a common time base.
Signed-off-by: Tom Barbette <barbette@kth.se>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
libnuma.so is needed to augment the cross toolchain with NUMA support.
This fixed meson cross compiling issue.
Command used:
meson arm64-build --cross-file config/arm/arm64_armv8_linux_gcc
ninja -C arm64-build
Compiling error:
.../aarch64-linux-gnu/bin/ld: lib/librte_eal.so.10.1: version node
not found for symbol numa_run_on_node_mask@@libnuma_1.2
.../aarch64-linux-gnu/bin/ld: failed to set dynamic section sizes:
Bad value
collect2: error: ld returned 1 exit status
[58/1370] Compiling C object 'lib/76b5a35@@rte_cmdline@sta/
librte_cmdline_cmdline_parse_string.c.o'.
ninja: build stopped: subcommand failed.
Fixes: 01add9da25 ("doc: add cross compiling guide")
Cc: stable@dpdk.org
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
The build-sdk-meson.txt file is a little out of date, so update it with
information on the latest build requirements, and remove any content
no longer needed.
Since the cross-compilation file quoted in the document is now considerably
longer and more complex than previous, replace the contents of the file
with a summary of it instead. This is shorter and more maintainable, and
the original file is available as part of the repo anyway if the user wants
to view it.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Per armv8 crypto extension support, make build always enable it by default
as long as compiler supports the feature while meson build only enables it
for 'default' machine of generic armv8 architecture.
It is known that not all the armv8 platforms have the crypto extension. For
example, Mellanox BlueField has a variant which doesn't have it. If crypto
enabled binary runs on such a platform, rte_eal_init() fails.
'+crypto' flag currently implies only '+aes' and '+sha2' and enabling it
will generate the crypto instructions only when crypto intrinsics are used.
For the devices supporting 8.2 crypto or newer, compiler could generate
such instructions beyond intrinsics or asm code. For example, compiler can
generate 3-way exclusive OR instructions if sha3 is supported. However, it
has to be enabled by adding '+sha3' as of today.
In DPDK, armv8 cryptodev is the only one which requires the crypto support.
As it even uses external library of Marvell which is compiled out of DPDK
with crypto support and there's run-time check for required cpuflags,
crypto support can be disabled in DPDK.
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Tested-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Since we change these macros, we might as well avoid triggering complaints
from checkpatch because of mixed case.
old=RTE_IPv4
new=RTE_IPV4
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"
old=RTE_ETHER_TYPE_IPv4
new=RTE_ETHER_TYPE_IPV4
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"
old=RTE_ETHER_TYPE_IPv6
new=RTE_ETHER_TYPE_IPV6
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
Current design requires kernel drivers and they need to be probed by
Linux up to some level so that they can be usable by DPDK for ethtool
support, this requires maintaining the Linux drivers in DPDK.
Also ethtool support is limited and hard, if not impossible, to expand
to other PMDs.
Since KNI ethtool support is not used commonly, if not used at all,
removing the support for the sake of simplicity and maintenance.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Since linuxapp in build configs has been changed to linux, change it
in the bluefield doc.
Fixes: 22d1d1ccc3 ("doc: add Mellanox BlueField platform guide")
Cc: stable@dpdk.org
Signed-off-by: Yong Wang <wang.yong19@zte.com.cn>
For an unknown reason, the sign "μ" is not accepted by some environments,
probably due to the version of some Latex packages or dependencies.
! Package inputenc Error: Unicode character μ (U+03BC)
(inputenc) not set up for use with LaTeX.
It is fixed by installing texlive-langgreek.
Fixes: d0dff9ba44 ("doc: sample application user guide")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: John McNamara <john.mcnamara@intel.com>
In some environment like the current dpdk.org server,
there can be some errors due to symbols in titles,
as it was the case before this commit in DPDK 18.05:
commit 551d148944 ("doc: remove flow API migration section")
! LaTeX Error: Bad math environment delimiter.
It can be avoided thanks to the Latex command \robustify.
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: John McNamara <john.mcnamara@intel.com>
The option -Dexamples=helloworld is missing.
The helloworld binary name was wrong.
Forcing clang may be required in some environments.
Fixes: 196c650b8b ("doc: add guide for Windows")
Cc: stable@dpdk.org
Signed-off-by: Adham Masarwah <adham@mellanox.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Start a new release cycle with empty release notes.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Function rte_power_set_env will no longer return
success on attempt to set env in initialized state.
Signed-off-by: Marcin Hajkowski <marcinx.hajkowski@intel.com>
Reviewed-by: Rami Rosen <ramirose@gmail.com>
Acked-by: David Hunt <david.hunt@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Add deprecation note for making changes in data structures, APIs
and macros in order to have more traffic classes, flexible
mapping of pipe queues to traffic classes, subport level
configuration of pipes and queues, etc. These changes are aligned
to improvements suggested in the RFC-
https://mails.dpdk.org/archives/dev/2018-November/120035.html
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
This patch adds deprecation notice of changing iv behaviour
when using Galois Counter Mode of operation.
With this change, IV of all supported sizes can be used.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
