Before removing the "make" build system completely,
the Linux guide instructions are made more concise and accurate.
Some detailed explanations are also available in
doc/guides/prog_guide/dev_kit_root_make_help.rst
This is the swan song for makefile system,
in order to have accurate information backported in LTS.
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
The build should be described only in few places,
in order to maintain up-to-date, accurate and detailed instructions.
This change is removing some of the unneeded repetitions.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Jay Zhou <jianjay.zhou@huawei.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
There was a doc about how to extend DPDK by adding a library.
It could have been useful but was never updated,
so it is lacking a lot of explanations about doxygen,
meson, versioning, maintainership, etc.
Anyway such guidelines should fit in the contributors guide.
Better to completely remove this obsolete document.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Introduce packet forwarding support to the app to do
some performance measurements.
The measurements are reported in term of packet per
second unit. The forwarding will start after the end
of insertion/deletion operations.
The support has single and multi performance measurements.
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Xiaoyu Min <jackmin@mellanox.com>
Introduce new feature to dump memory statistics of each socket
and a total for all before and after the creation.
This will give two main advantage:
1- Check the memory consumption for large number of flows
"insertion rate scenario alone"
2- Check that no memory leackage after doing insertion then
deletion.
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Xiaoyu Min <jackmin@mellanox.com>
Add the ability to test deletion rate for flow performance
application.
This feature is disabled by default, and can be enabled by
add "--deletion-rate" in the application command line options.
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Xiaoyu Min <jackmin@mellanox.com>
Add insertion rate calculation feature into flow
performance application.
The application now provide the ability to test
insertion rate of specific rte_flow rule, by
stressing it to the NIC, and calculate the
insertion rate.
The application offers some options in the command
line, to configure which rule to apply.
After that the application will start producing
rules with same pattern but increasing the outer IP
source address by 1 each time, thus it will give
different flow each time, and all other items will
have open masks.
The current design have single core insertion rate.
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Xiaoyu Min <jackmin@mellanox.com>
In order to optimize the PCI management, RTE_KDRV_NONE based
device driver probing removed by not adding them to list in
the scan phase.
The legacy virtio is the only consumer of RTE_KDRV_NONE based device
driver probe scheme. The legacy virtio support will be available
through the existing VFIO/UIO based kernel driver scheme.
This patch also removes the deprecation notice for the same.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
To fill the gap with linux kernel eBPF implementation,
add support for two non-generic instructions:
(BPF_ABS | <size> | BPF_LD) and (BPF_IND | <size> | BPF_LD)
which are used to access packet data.
These instructions can only be used when BPF context is a pointer
to 'struct rte_mbuf' (i.e: RTE_BPF_ARG_PTR_MBUF type).
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Provide a more direct link for installer download and clarify thread
model choice during installation. As pthread is not a requirement,
remove notice about its possible runtime dependency.
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Pallavi Kadam <pallavi.kadam@intel.com>
When capturing packets into a PCAP file, DPDK currently uses
microseconds for the timestamps. But libpcap supports interpreting
tv_usec as nanoseconds depending on the file timestamp precision,
as of commit ba89e4a18e8b ("Make timestamps precision configurable").
To support this, use PCAP_TSTAMP_PRECISION_NANO when creating the
empty PCAP file as specified by PCAP_OPEN_DEAD(3PCAP) and implement
nanosecond timeval addition. This also ensures that the precision
reported by capinfos is nanoseconds (9).
Note that NSEC_PER_SEC is defined as 1000000000L instead of 1e9 since
the latter might be interpreted as floating point.
Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Bitwise operation APIs are defined and used in a lot of PMDs,
which caused a huge code duplication. To reduce duplication,
this patch consolidates them into a common API family.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Basic memory management supports core libraries and PMDs operating in
IOVA as PA mode. It uses a kernel-mode driver, virt2phys, to obtain
IOVAs of hugepages allocated from user-mode. Multi-process mode is not
implemented and is forcefully disabled at startup. Assign myself as a
maintainer for Windows file and memory management implementation.
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Add hugepages discovery ("large pages" in Windows terminology)
and update documentation for required privilege setup. Only 2MB
hugepages are supported and their number is estimated roughly
due to the lack or unstable status of suitable OS APIs.
Assign myself as maintainer for the implementation file.
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
With memory management implemented for Windows, the guide for running
sample applications is going to be extended with hugepages and driver
setup. Move run instructions to a separate file to give space for
planned expansion.
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Clang on Windows follows MS ABI where enum values are limited to 2^31-1.
Enum rte_page_sizes has members valued above this limit, which get
wrapped to zero, resulting in compilation error (duplicate values in
enum). Using MS ABI is mandatory for Windows EAL to call Win32 APIs.
Remove rte_page_sizes and replace its values with #define's.
This enumeration is not used in public API, so there's no ABI breakage.
Announce API changes for 20.08 in documentation.
Suggested-by: Jerin Jacob <jerinjacobk@gmail.com>
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Since dynamic fields and flags were added in 19.11,
the idea was to use them for new features, not only PMD-specific.
The guideline is made more explicit in doxygen, in the mbuf guide,
and in the contribution design guidelines.
For more information about the original design, see the presentation
https://www.dpdk.org/wp-content/uploads/sites/35/2019/10/DynamicMbuf.pdf
This decision was discussed in the Technical Board:
http://mails.dpdk.org/archives/dev/2020-June/169667.html
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
add support for RSS reta/hash query and update function
Signed-off-by: Chandu Babu N <chandu@amd.com>
Acked-by: Amaranath Somalapuram <asomalap@amd.com>
Currently, when flow destroyed, some memory resources may still be kept
as cached to help next time create flow more efficiently.
Some system may need the resources to be more flexible with flow create
and destroy. After peak time, with millions of flows destroyed, the
system would prefer the resources to be reclaimed completely, no cache
is needed. Then the resources can be allocated and used by other
components. The system is not so sensitive about the flow insertion
rate, but more care about the resources.
Both DPDK mlx5 PMD driver and the low level component rdma-core have
provided the flow resources to be configured cached or not, but there is
no APIs or parameters exposed to user to configure the flow resources
cache mode. In this case, introduce a new PMD devarg to let user
configure the flow resources cache mode will be helpful.
This commit is to add a new "reclaim_mem_mode" to help user configure if
the destroyed flows' cache resources should be kept or not.
Their will be three mode can be chosen:
1. 0(none). It means the flow resources will be cached as usual. The
resources will be cached, helpful with flow insertion rate.
2. 1(light). It will only enable the DPDK PMD level resources reclaim.
3. 2(aggressive). Both DPDK PMD level and rdma-core low level will be
configured as reclaimed mode.
With these three mode, user can configure the resources cache mode with
different levels.
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
There was a duplicate command instruction in the documentation of memif
so I have removed the 1 command from it.
Fixes: cbbbbd3365 ("net/memif: enable loopback")
Cc: stable@dpdk.org
Signed-off-by: Muhammad Bilal <m.bilal@emumba.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
With Doxygen 1.8.18, a warning appears when tagging
the main markdown header with {#index}.
That's why the tag has been removed from the API index in DPDK 20.05.
Unfortunately it makes the index page classified as a standard
"related page" instead of being the "main page".
The tag {#mainpage} could be used instead of {#index}.
Another solution, chosen here, is to specify the main page file
in the Doxygen configuration with the variable USE_MDFILE_AS_MAINPAGE.
Fixes: 76fb8fc486 ("doc: fix build with doxygen 1.8.18")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Tested-by: David Marchand <david.marchand@redhat.com>
Start a new release cycle with empty release notes.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
When modifying the rte_devargs implementation, a deprecation notice was
done for v18.11, regarding internal rte_devargs structure and exposed
functions.
Most of the changes were part of v18.11, but the notice was not removed.
Signed-off-by: Gaetan Rivet <grive@u256.net>
In order to optimize the DPDK PCI enumeration management, RTE_KDRV_NONE
based device driver probing will be removed in v20.08.
The legacy virtio is the only consumer of RTE_KDRV_NONE based
device driver probe scheme.
The legacy virtio support will be available through existing VFIO/UIO
based kernel driver scheme.
More details at https://patches.dpdk.org/patch/69351/
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
For the ABI compatibility it is better to hide internal data structures
from the application as much as possible. But because of some inline
functions 'struct eth_dev_ops' can't be hidden completely.
Plan is to split the 'struct eth_dev_ops' into two as ones used by
inline functions and ones not used, and hide the second part that not
used by inline functions completely to the application.
Because of ABI break the work will be done in 20.11
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Update the description and limitation about ice PMD according to the
product release strategy.
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
As agreed in the DPDK tech board [1], after 20.05 release, patches must
use C11 atomic operations semantics with the help of wrappers.
[1] http://mails.dpdk.org/archives/dev/2020-April/165143.html
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: David Christensen <drc@linux.vnet.ibm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Based on the discussion in mail thread, it is concluded that
all traffic manager API's (rte_tm.h) need to be marked experimental
till few more releases to support further improvements to spec.
https://mails.dpdk.org/archives/dev/2020-April/164970.html
Adding deprecation notice for the same in advance.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Explicitly note that experimental APIs also part of security process.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Clarify that a fixed date will be used for end of embargo (public
disclosure) date while communicating with downstream stakeholders.
Initial document got a review that it gives an impression that
communicated embargo date can be a range like 'less than a week' which
is not the case. The range applies when defining the end of the embargo
date but a fix date will be communicated.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Bugzilla ID: 422
Fixes: 9e0e4a00df ("doc: suggest to keep doc and code in same patch")
Cc: stable@dpdk.org
Signed-off-by: Muhammad Bilal <m.bilal@emumba.com>
igb_uio kernel module disabled by default starting from v20.02,
document this to prevent confusion.
And add note about long term igb_uio plans/directions to move it to
another repo based on DPDK technical board decision:
http://mails.dpdk.org/archives/dev/2019-November/151763.html
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Since we've moved away from our initial validate-abi.sh script,
in favor of check-abi.sh, which uses libabigail,
remove the old script from the tree, and update the docs accordingly.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The intel-ipsec-mb library requires NASM as a dependency.
Steps on how to get and install NASM are added on the documentation
of the crypto PMDs which requires the library.
Bugzilla ID: 417
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
The example shown for registering telemetry commands was previously
missing the help text parameter.
Fixes: 24cd1b529f ("doc: update telemetry guides")
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Update documentation for 'show fwd' testpmd runtime function to show
CPU cycles/packet example.
Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
- Update list of supported adapters.
- Update list of supported features.
- Add some details to describe the features.
- Remove obsolete limitations.
- Fix and update links.
Signed-off-by: JP Lee <jongpil.lee@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
Having an explicit "index" anchor looks forbidden:
doc/api/doxy-api-index.md:1: warning:
multiple use of section label 'index' for main page
Anyway this anchor was not used, it can be removed.
Fixes: 9bf486e606 ("doc: generate HTML for API with doxygen")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Tested-by: Jerin Jacob <jerinj@marvell.com>
Add device arguments to lock NPA aura and pool contexts in NDC cache.
The device args take hexadecimal bitmask where each bit represent the
corresponding aura/pool id.
Example:
-w 0002:02:00.0,npa_lock_mask=0xf // Lock first 4 aura/pool ctx
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
The versions currently listed as maintained have gone stale.
Rather than having to keep updating this doc, point to the
dpdk.org stable roadmap.
Signed-off-by: Kevin Traynor <ktraynor@redhat.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Removed the typing error in doc/guides/eventdevs/index.rst,
drivers/net/mlx5/mlx5.c and in lib/librte_vhost/rte_vhost.h
Bugzilla ID: 477
Fixes: 0857b94211 ("doc: add event device and software eventdev")
Fixes: 039253166a ("vhost: add device op when notification to guest is sent")
Fixes: ad74bc6195 ("net/mlx5: support multiport IB device during probing")
Cc: stable@dpdk.org
Signed-off-by: Muhammad Bilal <m.bilal@emumba.com>
rte_dpaa2_memsegs is not being used by any other library
or even within bus.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Some errors in the document:
* API instead of ABI once.
Some typos:
* __rte_depreciated instead of __rte_deprecated.
* missing ```` around value.
* inconsistent reference to major ABI version, most
of the time described without the minor appended, except once.
Verbosity and grammar:
* Long sentences that would be better cut short.
* Comma abuse.
* 'May' used where 'can' seems more fitting.
I'm not a native speaker though, so grain of salt applies.
Fixes: fdf7471ccc ("doc: introduce major ABI versions")
Cc: stable@dpdk.org
Signed-off-by: Gaetan Rivet <grive@u256.net>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Add a separate section for low-resolution generic counter
for ARM64 profiling methods.
Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Removing the current limitation for TSO over VM
due to the fact that mlx5 currently support it.
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Acked-by: Asaf Penso <asafp@mellanox.com>
If running DPDK as non-root, some extra capabilities may be required.
The Mellanox devices, using a bifurcated model with Linux drivers,
have some specific requirements summarized in mlx5 PMD guide.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Raslan Darawsheh <rasland@mellanox.com>
Multicast MAC filter flag means device ops set_mc_addr_list support
or not. This patch fixes the wrong flag value in Intel driver's document.
Fixes: 9db3f52126 ("doc: generate NIC overview table from ini files")
Fixes: cb25d4323f ("net/avf: enable MAC VLAN and promisc ops")
Fixes: 26e8873433 ("net/ice: support MAC ops")
Cc: stable@dpdk.org
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
On v20.02 some APIs matured and symbols moved from EXPERIMENTAL to
DPDK_20.0.1 block.
This had the affect of breaking the applications that were using these
APIs on v19.11. Although there is no modification of the APIs and the
action is positive and matures the APIs, the affect can be negative to
applications.
When a maintainer is promoting an API to become part of the next major
ABI version by removing the experimental tag. The maintainer may
choose to offer an alias to the experimental tag, to prevent these
breakages in future.
The following changes are made to enabling aliasing:
Updated to the ABI policy and ABI versioning documents.
Created VERSION_SYMBOL_EXPERIMENTAL helper macro.
Updated the 'check-symbols.sh' tool, which was complaining that the
symbol is in EXPERIMENTAL tag in .map file but it is not in the
.experimental section (__rte_experimental tag is missing).
Updated tool in a way it won't complain if the symbol in the
EXPERIMENTAL tag duplicated in some other block in .map file (versioned)
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The document abi_versioning.rst incorrectly instructs the developer to
add BIND_DEFAULT_SYMBOL to the public header, not the source file. This
commit fixes the issue and adds some clarifications.
The commit also clarifies the use of use_function_versioning in the
meson/ninja build system, and does some minor re-organization of the
document.
Fixes: f1ef9794f9 ("doc: add ABI guidelines")
Cc: stable@dpdk.org
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Clarify the reasons behind the three part version numbering scheme.
Documents the fixes made in f26c2b3.
Fixes: f26c2b39b2 ("build: fix soname info for 19.11 compatibility")
Cc: stable@dpdk.org
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The documentation says that CONFIG_ENABLE_LTO enables LTO during the
build, but the correct value actually is CONFIG_RTE_ENABLE_LTO.
Fixes: 098cc0fea3 ("build: add option to enable LTO")
Cc: stable@dpdk.org
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Acked-by: Andrzej Ostruszka <aostruszka@marvell.com>
Since it will check the feature mask before running out-of-place
test cases and the virtio-crypto device supports OOP_LB_IN_LB_OUT mode.
Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com>
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
The OCTEON TX crypto PMD supports non-byte aligned data as
input for SNOW and ZUC algos. Adding the same to the feature list.
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
The OCTEON TX2 crypto PMD supports non-byte aligned data as
input for SNOW and ZUC algos. Adding the same to the feature list.
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Add release notes update for QAT DOCSIS AES-256 support
Fixes: 2aab3ff3d8 ("crypto/qat: support DOCSIS AES-256")
Signed-off-by: Mairtin o Loingsigh <mairtin.oloingsigh@intel.com>
This patch adds to MLX5 PMD the support of matching on
GTP header item v_pt_rsv_flags.
This item is contained in 1 byte of the format:
-------------------------------------------
| bit | 0 - 2 | 3 | 4 | 5 | 6 | 7 |
|-----------------------------------------|
| value | Version | PT | Res | E | S | PN |
-------------------------------------------
Matching is supported only for GTP flags E, S, PN.
Therefore values 0 to 7 are supported.
Mask must be set accordingly:
... gtp v_pt_rsv_flags is 1 v_pt_rsv_flags mask 0x07 ...
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
In existing implementation, using wild card VLAN item is not allowed.
A VLAN item in flow pattern must include VLAN ID (vid) value.
This obligation contradict the flow API specification [1].
This patch updates the VLAN item validation and translation, to allow
wild card VLAN item, without VLAN ID value.
User guide and release notes are updated accordingly.
[1]
commit 40513808b165 ("doc: refine ethernet and VLAN flow rule items")
Fixes: 00f75a4057 ("net/mlx5: fix VLAN match for DV mode")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Now this feature is no longer supported by kernel side, (i40e kernel
driver doesn't support it from v2.3.2 and ixgbe kernel driver isn't
guaranteed to support this feature as well in the future), so remove the
Intel PMD examples to avoid confusion.
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add Rx descriptor limit for number of segments per MTU.
PMD doesn't support Jumbo Rx scatter gather hence set 1 segment per
MTU. Some applications can adjust mbuf_size based on this value.
For others PMD detects the condition where Rx packet length cannot
be held by configured mbuf size and logs the message.
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Specified pattern may be translated in different manner.
For example the pattern "eth / ipv4" can be translated to match
untagged packets only, since the pattern doesn't specify a VLAN item.
It can also be translated to match both tagged and untagged packets,
for the same reason.
This patch updates the rte_flow documentation to clearly specify the
required pattern to use.
For example:
To match tagged ipv4 packets, the pattern "eth / vlan / ipv4 / end"
should be used.
To match untagged ipv4 packets, the pattern "eth / ipv4 / end"
should be used.
To match all IPV4 packets, both tagged and untagged, need to apply
two rules with the patterns above.
To match both tagged and untagged packets of any type, the pattern
"eth / end" should be used.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ori Kam <orika@mellanox.com>
One new cmdline option `--rx-mq-mode` is added in order to have the
possibility to check whether PMD handle the mq mode correctly or not.
The reason is some NICs need to do different settings based on different
RX mq mode, i.e RSS or not.
With this support in testpmd, the above scenario can be tested easily.
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
There is no way to report back a link speed of 200Gbps.
Adding 200G link speed.
Signed-off-by: Asaf Penso <asafp@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Currently, when running start/clear stats&xstats/stop command many times
based on testpmd application, there are incorrect forward Rx/Tx-packets
stats as below:
---------------------- Forward statistics for port 0 --------------
RX-packets: 18446744073709544808 RX-dropped: 0 <snip>
TX-packets: 18446744073709536616 TX-dropped: 0 <snip>
--------------------------------------------------------------------
The root cause as below:
1. The struct rte_port of testpmd.h has a member variable "struct
rte_eth_stats stats" to store the last port statistics.
2. When running start command, it execute cmd_start_parsed ->
start_packet_forwarding -> fwd_stats_reset, which call
rte_eth_stats_get API function to save current port statistics.
3. When running stop command, it execute fwd_stats_display, which call
rte_eth_stats_get to get current port statistics, and then minus last
port statistics.
4. If we run clear stats or xstats after start command, then run stop,
it may display above incorrect stats because the current
Rx/Tx-packets is lower than the last saved RX/TX-packets(uint64_t
overflow).
This patch fixes it by clearing last port statistics when executing
"clear stats/xstats" command.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Currently, there is no way to check the aging event or to get the
current aged flows in testpmd, this patch include those implements, it's
included:
- Add new item "flow_aged" to the current print event command arguments.
- Add new command to list all aged flows, meanwhile, we can set
parameter to destroy it.
Signed-off-by: Dong Zhou <dongz@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds missing line about addition of AES-GCM/GMAC J0
capability to 20.05 release notes.
Fixes: 2165e2e9ea ("crypto/qat: support AES-GCM J0")
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Updated SNOW3G and KASUMI PMD documentation guides
with information about the latest Intel IPSec Multi-buffer
library supported.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The latest version of the Intel IPSec Multi-buffer library
adds an API to authenticate multiple buffers in parallel.
The PMD is modified to use this API, improving
performance of the ZUC-EIA3 algorithm.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Some wireless algos like SNOW, ZUC may support input
data in bits which are not byte aligned. However, not
all PMDs can support this requirement. Hence added a
new feature flag RTE_CRYPTODEV_FF_NON_BYTE_ALIGNED_DATA
to identify which all PMDs can support non-byte aligned
data.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
As more test cases are defined for execution, test scripts structure
needs to be reorganized, so fewer files are needed to describe the test.
To achieve that, new environment variables are incorporated into the
scripts.
Additionally, tests for mixed tunnel protocols are added.
Signed-off-by: Mariusz Drost <mariuszx.drost@intel.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
rte_pci_probe() is private to the PCI bus.
Clean the remaining references in the documentation and comments.
Fixes: c752998b5e ("pci: introduce library and driver")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Gaetan Rivet <grive@u256.net>
The existing documentation for Telemetry is updated, and further
documentation is added.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Keith Wiles <keith.wiles@intel.com>
This patch updates the MLX5 PMD and release notes documentations.
Adding the notes of the behavior change that rte flows organization
is switched into non-cached mode for applications.
Signed-off-by: Bing Zhao <bingz@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
This patch updates the MLX5 PMD and release notes documentations.
Adding the guideline for hairpin data buffer size configuration.
Signed-off-by: Bing Zhao <bingz@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Currently, there is no flow aging check and age-out event callback
mechanism for mlx5 driver, this patch implements it. It's included:
- Splitting the current counter container to aged or no-aged container
since reducing memory consumption. Aged container will allocate extra
memory to save the aging parameter from user configuration.
- Aging check and age-out event callback mechanism based on current
counter. When a flow be checked aged-out, RTE_ETH_EVENT_FLOW_AGED
event will be triggered to applications.
- Implement the new API: rte_flow_get_aged_flows, applications can use
this API to get aged flows.
Signed-off-by: Dong Zhou <dongz@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Refactor the code and make it easier to read. It's
useful for understanding the inflight APIs and how
packed ring works. Update the RST because the packed
ring patch has been merged to QEMU master and ring_packed
parameter changes to packed.
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Rewrite vectorized path selection logic. Default setting comes from
vectorized devarg, then checks each criteria.
Packed ring vectorized path need:
AVX512F and required extensions are supported by compiler and host
VERSION_1 and IN_ORDER features are negotiated
mergeable feature is not negotiated
LRO offloading is disabled
Split ring vectorized rx path need:
mergeable and IN_ORDER features are not negotiated
LRO, chksum and vlan strip offloadings are disabled
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Optimize packed ring Tx path like Rx path. Split Tx path into batch and
single Tx functions. Batch function is further optimized by AVX512
instructions.
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Optimize packed ring Rx path with SIMD instructions. Solution of
optimization is pretty like vhost, is that split path into batch and
single functions. Batch function is further optimized by AVX512
instructions.
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add new devarg for virtio user device vectorized path selection.
By default vectorized path is disabled.
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Previously, virtio split ring vectorized path was enabled by default.
This is not suitable for everyone because that path does not follow
virtio spec. Add new devarg for virtio vectorized path selection. By
default vectorized path is disabled.
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The goal is to make the table more readable.
Mark as partially supported features that are supported in
the generic Virtio driver but not in the vectorized ones.
Suggested-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Each PCTYPE can only have one specific FDIR input set at one time.
Add input set requirement info to i40e doc.
Bugzilla ID: 403
Fixes: 14c66a451e ("net/i40e: flush tunnel filters")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Invert the current trace point headers logic by making
rte_trace_point_register.h include rte_trace_point.h.
There is no more need for a RTE_TRACE_POINT_REGISTER_SELECT special macro
since including rte_trace_point_register.h itself means we want to
register trace points.
The unexplained "provider" notion is removed from the documentation and
rte_trace_point_provider.h is merged into rte_trace_point.h.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Adding programmer's guide for Graph library and the inbuilt nodes.
This patch also updates the release note for the new libraries.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Add IPv4 lookup process function for ip4_lookup node.
This node performs LPM lookup using simple RTE_LPM API on every packet
received and forwards it to a next node that is identified by lookup
result.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Add ctrl api to setup ethdev_rx and ethdev_tx node.
This ctrl api clones 'N' number of ethdev_rx and ethdev_tx
nodes with specific (port, queue) pairs updated in their context.
All the ethdev ports and queues are setup before this api
is called.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Add log infra for node specific logging.
Also, add null rte_node that just ignores all the objects
directed to it.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Adding implementation for rte_graph_walk() API. This will perform a walk
on the circular buffer and call the process function of each node
and collect the stats if stats collection is enabled.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Graph architecture abstracts the data processing functions as
"node" and "link" them together to create a complex "graph" to enable
reusable/modular data processing functions.
These APIs enables graph framework operations such as create, lookup,
dump and destroy on graph and node operations such as clone,
edge update, and edge shrink, etc. The API also allows creating the
stats cluster to monitor per graph and per node stats.
This patch defines the public API for graph support.
This patch also adds support for the build infrastructure and
update the MAINTAINERS file for the graph subsystem.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Change rte_mempool_populate_iova() and rte_mempool_populate_virt() to
return 0 instead of -EINVAL when there is not enough room to store one
object, as it can be helpful for applications to distinguish this
specific case.
As this is an ABI change, use symbol versioning to preserve old
behavior for binary applications.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
Now we need to add prefix like lib. to enable the log,
also changing val 8 to "debug"" which would be more descriptive.
Fixes: ffb9fd1b08 ("log: update legacy modules dynamic logs regex")
Cc: stable@dpdk.org
Reported-by: Haiyue Wang <haiyue.wang@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Add some new types, such as eth/l2-src-only/l2-dst-only/svlan/cvlan/
l2tpv3/esp/ah/pfcp types into RSS hash commands, it could be used
to configure these rss input set by cmdline.
Example flow commands was:
testpmd>flow create 0 ingress pattern eth / ipv4 / l2tpv3oip / end \
actions rss types l2tpv3 end key_len 0 queues end / end
port config commands was:
testpmd>port config all rss l2tpv3
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
The VF must be capable of configuring RSS. Add a virtchnl handler to
parse a specific RSS configuration, and process the configuration for
VFs, such as add or delete a RSS rule.
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
One of the reasons to destroy a flow is the fact that no packet matches
the flow for "timeout" time.
For example, when TCP\UDP sessions are suddenly closed.
Currently, there is not any DPDK mechanism for flow aging and the
applications use their own ways to detect and destroy aged-out flows.
The flow aging implementation need include:
- A new rte_flow action: RTE_FLOW_ACTION_TYPE_AGE to set the timeout and
the application flow context for each flow.
- A new ethdev event: RTE_ETH_EVENT_FLOW_AGED for the driver to report
that there are new aged-out flows.
- A new rte_flow API: rte_flow_get_aged_flows to get the aged-out flows
contexts from the port.
- Support input flow aging command line in Testpmd.
The new event type addition in the enum is flagged as an ABI breakage,
so an ignore rule is added for these reasons:
- It is not changing value of existing types (except MAX)
- The new value is not used by existing API if the event is not
registered
In general, it is safe adding new ethdev event types at the end of the
enum, because of event callback registration mechanism.
Signed-off-by: Dong Zhou <dongz@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Matan Azrad <matan@mellanox.com>
This patch adds FDIR create/destroy/validate function in AVF.
Common pattern and queue/qgroup/passthru/drop actions are supported.
Signed-off-by: Simei Su <simei.su@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
This patch allows to display flow stats in extended stats.
To do this, DMA-able memory is registered with the FW during device
initialization. Then the driver uses an alarm thread to query the
per flow stats using the HWRM_CFA_COUNTER_QSTATS HWRM command at
regular intervals and stores it locally which will be displayed
when the application queries the xstats.
The DMA-able memory is unregistered during driver cleanup.
This functionality can be enabled using the flow-xstat devarg and
will be disabled by default. The intention behind this is to allow
stats to be displayed for all the flows in one shot instead of
querying one at a time.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
HWRM API allows drivers to query stats per PCI function.
These stats can provide some useful information in certain
circumstances.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
virtio driver already parses speed devarg. virtio-user should add
it to list of valid devargs and call eth_virtio_dev_init function
which init speed value.
eth_virtio_dev_init already is called from virtio_user_pmd_probe
function. The only change is required to enable speed devargs:
adding speed to list of valid devargs.
Signed-off-by: Ivan Dyukov <i.dyukov@samsung.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Some applications like pktgen use link speed to calculate
transmission rate. It limits outcome traffic to hardcoded 10G.
This patch adds speed devarg which allows to configure
link speed of virtio device.
Signed-off-by: Ivan Dyukov <i.dyukov@samsung.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add memory pre-allocation note for vhost example when enabling
"builtin-net-driver".
Signed-off-by: Xuan Ding <xuan.ding@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add ESP patterns to i40e_flow_parse_rss_pattern().
Update i40e PMD user guide with download link for esp-ah.pkg file.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Support rte_flow RSS action on outer headers (level 0). RSS ranges on
the non-default port is OK.
Restrictions:
- The RETA is ignored. The hash function is simply applied across
the RSS queue range.
- The queues used in the RSS group must be sequential.
- There is a performance hit if the number of queues is not a power
of 2.
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Hyong Youb Kim <hyonkim@cisco.com>
Define a device parameter to configure log 2 of a stride size for MPRQ
- mprq_log_stride_size. User is able to specify a stride size in a range
allowed by an underlying hardware. The default stride size is defined as
2048 bytes to encompass most commonly used packet sizes in the Internet
(MTU 1518 and less) and will be used in case a maximum configured packet
size cannot fit into the largest possible stride size. Otherwise a
stride size is set to a large enough value to encompass a whole packet.
Cc: stable@dpdk.org
Signed-off-by: Alexander Kozyrev <akozyrev@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Setup NIC to generate MSI-X interrupts.
Set the IVAR register to map interrupt causes to vectors.
Implement interrupt enable/disable functions.
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Added vHost PMD arguments 'linear-buffer' and 'ext-buffer'
to configure 'RTE_VHOST_USER_LINEARBUF_SUPPORT' and
'RTE_VHOST_USER_EXTBUF_SUPPORT' flags in the vhost library
Signed-off-by: Sivaprasad Tummala <sivaprasad.tummala@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add an new device argument 'no-rx', which will prevent PMD receiving
packets.
This is useful for testing when a PMD is needed only to send packets to.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch added iavf_flow_create, iavf_flow_destroy,
iavf_flow_flush and iavf_flow_validate support,
these are used to handle all the generic filters.
This patch supported basic L2, L3, L4 and GTPU patterns.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
As AWS metal instances are supporting IOMMU, the usage of igb_uio or
vfio-pci can lead to a problems (when to use which module), especially
that the vfio-pci isn't supporting SMMU on arm64.
To clear up the problem of using those modules in various setup
conditions (with or without IOMMU) on metal instances, more detailed
explanation was added.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
Some ENA devices can pass to the driver descriptor with length 0. To
avoid extra allocation, the descriptor can be reused by simply putting
it back to the device.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
In the LLQ (Low-latency queue) mode, the device can indicate that meta
data descriptor caching is disabled. In that case the driver should send
valid meta descriptor on every Tx packet.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
ENA device can report in the AENQ handler amount of Tx packets that were
dropped and not sent.
This statistic is showing global value for the device and because
rte_eth_stats is missing field that could indicate this value (it
isn't the Tx error), it is being presented as a extended statistic.
As the current design of extended statistics prevents tx_drops from
being an atomic variable and both tx_drops and rx_drops are only updated
from the AENQ handler, both were set as non-atomic for the alignment.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
Default LLQ (Low-latency queue) maximum header size is 96 bytes and can
be too small for some types of packets - like IPv6 packets with multiple
extension. This can be fixed, by using large LLQ headers.
If the device supports larger LLQ headers, the user can activate them by
using device argument 'large_llq_hdr' with value '1'.
If the device isn't supporting this feature, the default value (96B)
will be used.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
Update driver/firmware/package version for DPDK20.02
Signed-off-by: Zhaoyan Chen <zhaoyan.chen@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Enable source MAC address and destination MAC address as FDIR's
input set for ipv4-other, ipv4-udp and ipv4-tcp. When OVS-DPDK is
working as a pure L2 switch, enable MAC address as FDIR input set
with Mark+RSS action would help the performance speed up. And FVL
FDIR supports to change input set with MAC address.
Signed-off-by: Lunyuan Cui <lunyuanx.cui@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
In order that all queues of pools can receive packets,
add enable-rss argument to change RSS configuration.
Fixes: 6bb97df521 ("examples/vmdq: new app")
Cc: stable@dpdk.org
Signed-off-by: Junyu Jiang <junyux.jiang@intel.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Tested-by: Yingya Han <yingyax.han@intel.com>
Currently, there is no documentation for VMDq example,
this path added the user guide for VMDq.
Signed-off-by: Junyu Jiang <junyux.jiang@intel.com>
Reviewed-by: Jingjing Wu <jingjing.wu@intel.com>
Introduce new command to dump memory statistics of each socket,
summary, also show changes since last call.
Usage:
dump_socket_mem
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
DCF on CVL is a control plane VF which take the responsibility to
configure all the PF/global resources, this patch add support DCF
on to program forward rule to direct packets to VFs.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch adds SDP packet parsing support with custom L2 header,
adds support to include a field from custom header for flow tag
generation.
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add Traffic Management capability callbacks to provide
global, level and node capabilities. This patch also
adds documentation on Traffic Management Support.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Krzysztof Kanas <kkanas@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add Tx queue ratelimiting support. This support is mutually
exclusive with TM support i.e when TM is configured, tx queue
ratelimiting config is no more valid.
Signed-off-by: Krzysztof Kanas <kkanas@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
This patch implements rx/tx checksum offload. In case of
wrong checksum received (inner/outer l3/l4) it reports the
corresponding layer which has bad checksum and also corrects
it if hw checksum is enabled on tx side.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Adding support for setting link up/down eth operation.
It is used to enable disable lmac. Also implemented a
poll function for getting the link status at regular
intervals.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Patch adds support for vlan filter offload support.
MBOX messages for vlan filter on/off and vlan filter
entry add/rm are added to configure PCAM entries to
filter out the vlan traffic on a given port.
Patch also defines rx_offload_flag for vlan filtering.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Harman Kalra <hkalra@marvell.com>
Adding multi segment support to the octeontx PMD. Also
adding the logic to share rx/tx ofloads with the eventdev
code.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Remove vector path feature list, if a feature only be supported
in non-vector path, use "P" to represent.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Remove vector path feature list, if a feature only be supported
in non-vector path, use "P" to represent.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Remove vector path feature list, if a feature only be supported
in non-vector path, use "P" to represent.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Remove vector path feature list, if a feature only be supported
in non-vector path, use "P" to represent.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
MARK and META items are interrelated with datapath -
they might move from/to the applications in mbuf.
zero value for these items has the special meaning -
it means "no metadata are provided", not zero values
are treated by applications and PMD as valid ones.
Moreover in the flow engine domain the value zero is
acceptable to match and set, and we should allow to
specify zero values as rte_flow parameters for the
META and MARK items and actions. In the same time
zero mask has no meaning and should be rejected
on validation stage.
Fixes: fcc8d2f716 ("net/mlx5: extend flow metadata support")
Fixes: e554b672aa ("net/mlx5: support flow tag")
Fixes: 55deee1715 ("net/mlx5: extend flow mark support")
Cc: stable@dpdk.org
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
In the current state, when preforming read/write
transactions we must wait for a completion in order
to run the next transaction, and all transactions are
performed by order.
Relaxed Ordering is a PCI optimization which by enabling it
we allow the system to perform read/writes in a different
order without having to wait for completion and improve
the performance in that matter.
This commit introduces the creation of relaxed ordering
memory regions in mlx5.
As relaxed ordering is an optimization, drivers that
do not support it can simply ignore it and therefore
it is enabled by default.
Signed-off-by: Shiri Kuzin <shirik@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Introduce the DCF (Device Config Function) feature in the ice PMD, it
works as a standalone PMD which doesn't handle the packet Rx/Tx related
things. Its hardware entity is the VF.
Add the basic DCF hardware initialization, this is specified by devarg
'cap=dcf'.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add programmer's guide for trace library support.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Trace library exposes --trace-mode eal parameter to configure
event record mode when ring buffers are full.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Trace library exposes --trace-bufsz EAL parameter to configure
maximum size of ring buffer where events are to be stored.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Trace library exposes --trace-dir EAL parameter to configure
directory where traces will be generated.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Define the public API for trace support.
This patch also adds support for the build infrastructure and
update the MAINTAINERS file for the trace subsystem.
The 8 bytes tracepoint object is a global variable, and can be used in
fast path. Created a new __rte_trace_point section to store the
tracepoint objects as,
- It is a mostly read-only data and not to mix with other "write"
global variables.
- Chances that the same subsystem fast path variables come in the same
fast path cache line. i.e, it will enable a more predictable
performance number from build to build.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Add a section to describe a design to integrate QSBR RCU library
with other libraries in DPDK.
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Updated AESNI MB and AESNI GCM PMD documentation guides
with information about the latest Intel IPSec Multi-buffer
library supported.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch adds support for plain SHA-1, SHA-224, SHA-256,
SHA-384 and SHA-512 hashes to QAT PMD.
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Add feature flag for symmetric sessionless support,
so it can be checked by applications.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Tested-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Adding missing overview page in documentation with
comparison of feature set by each available PMD implementation.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Dave Burley <dave.burley@accelercomm.com>
Acked-by: Niall Power <niall.power@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add configure function to configure the PF from within
the bbdev-test itself without external application
configuration the device.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Dave Burley <dave.burley@accelercomm.com>
Reviewed-by: Niall Power <niall.power@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Adding LDPC processing operations and related documentation.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Dave Burley <dave.burley@accelercomm.com>
Acked-by: Niall Power <niall.power@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add stubs for the FPGA 5GNR FEC PMD
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Dave Burley <dave.burley@accelercomm.com>
Acked-by: Niall Power <niall.power@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch implements a special way of buffer handling when internal
QAT IM buffer is too small for Huffman dynamic compression operation.
Instead of falling back to fixed compression, the operation is now
split into multiple smaller dynamic compression requests (possible to
execute on QAT) and their results are then combined and copied into
the output buffer. This is not possible if any checksum calculation
was requested - in such case the code falls back to fixed compression
as before.
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Add support for CPU crypto mode by introducing required handler.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Support load distribution in security gateway application using
NIC load distribution feature (Flow Director).
Flow Director is used to redirect the specified inbound ipsec flow
to a specified queue. This is achieved by extending the SA rule syntax
to support specification by adding new action_type of <flow-direction>
to a specified <port_id> <queue_id>.
Signed-off-by: Praveen Shetty <praveen.shetty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch adds support for DOCSIS AES-256 when using AESNI-MB
Signed-off-by: Mairtin o Loingsigh <mairtin.oloingsigh@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
For rings with producer/consumer in RTE_RING_SYNC_ST, RTE_RING_SYNC_MT_HTS
mode, provide an ability to split enqueue/dequeue operation
into two phases:
- enqueue/dequeue start
- enqueue/dequeue finish
That allows user to inspect objects in the ring without removing
them from it (aka MT safe peek).
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Introduce head/tail sync mode for MT ring synchronization.
In that mode enqueue/dequeue operation is fully serialized:
only one thread at a time is allowed to perform given op.
Suppose to reduce stall times in case when ring is used on
overcommitted cpus (multiple active threads on the same cpu).
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Introduce relaxed tail sync (RTS) mode for MT ring synchronization.
Aim to reduce stall times in case when ring is used on
overcommited cpus (multiple active threads on the same cpu).
The main difference from original MP/MC algorithm is that
tail value is increased not by every thread that finished enqueue/dequeue,
but only by the last one.
That allows threads to avoid spinning on ring tail value,
leaving actual tail value change to the last thread in the update queue.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
To make these preparations two main things are done:
- Change from *single* to *sync_type* to allow different
synchronisation schemes to be applied.
Mark *single* as deprecated in comments.
Add new functions to allow user to query ring sync types.
Replace direct access to *single* with appropriate function call.
- Move actual rte_ring and related structures definitions into a
separate file: <rte_ring_core.h>. It allows to refer contents
of <rte_ring_elem.h> from <rte_ring.h> without introducing a
circular dependency.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
The PMDs bnx2x and nfp have a separate column for VF.
Such separation is unneeded because the features are the same.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The virtual PMDs bonding, KNI, null, ring, softnic and vdev_netvsc
have no real feature to advertise so they can be removed
from the (too) big matrix of ethdev features.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
It seems sphinx >= 2.0 is inserting a <p> tag in each table cell.
The feature table (matrix) style needs to be updated to avoid
cells being too big.
The margin, padding and line height are overridden.
The font size in percentage is replaced with an equivalent pixel size.
The border is explicit because it disappeared for th.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The new macro __rte_noreturn, for compiler hinting,
is now used where appropriate for consistency.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
There is a common macro __rte_unused, avoiding warnings,
which is now used where appropriate for consistency.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
There is a common macro __rte_packed for packing structs,
which is now used where appropriate for consistency.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The function add_stylesheet() is deprecated since sphinx 1.8.
It will be removed in sphinx 4.0.
It is replaced by add_css_file().
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Current l2fwd-event application statically configures adjacent ports as
destination ports for forwarding the traffic.
Add a config option to pass the forwarding port pair mapping which allows
the user to configure forwarding port mapping.
If no config argument is specified, destination port map is not
changed and traffic gets forwarded with existing mapping.
To align port/queue configuration of each lcore with destination port
map, port/queue configuration of each lcore gets modified when config
option is specified.
Ex: ./l2fwd-event -c 0xff -- -p 0x3f -q 2 --config="(0,3)(1,4)(2,5)"
With above config option, traffic received from portid = 0 gets forwarded
to port = 3 and vice versa, similarly traffic gets forwarded on other port
pairs (1,4) and (2,5).
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Andrzej Ostruszka <aostruszka@marvell.com>
Remove setting ALLOW_EXPERIMENTAL_API individually for each Makefile and
meson.build. Instead, enable ALLOW_EXPERIMENTAL_API flag across app, lib
and drivers.
This changes reduces the clutter across the project while still
maintaining the functionality of ALLOW_EXPERIMENTAL_API i.e. warning
external applications about experimental API usage.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
This patch adds handling of mixed hash-cipher algorithms
available on GEN2 QAT in particular firmware versions.
Also the documentation is updated to show the mixed crypto
algorithms are supported on QAT GEN2.
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Modification to vectors parameters used for unit test
for coverage and performance test of bbdev drivers
across all devices.
Updating and reducing list for focused coverage on relevant
code blocks for 4G and 5G. Less focus on 4G TB mode as there is
some question how to best support this with mbuf limitations and
if effect are not used.
Removing scenarios with negative LLR assumptions which are not
used with any PMDs and historical only.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Dave Burley <dave.burley@accelercomm.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Includes support for BLER (Block Error Rate) wireless
performance test with new arguments for SNR and number
of iterations for 5G. This generates LLRs for a given
SNR level then measures the ratio of code blocks being
successfully decoded or not.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Dave Burley <dave.burley@accelercomm.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This is to support cases when the input data for
decoding a code block is larger than 64kB and would
not fit as a contiguous block of data into one
mbuf. In that case the length from the operation
supersedes the mbuf default structure.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Dave Burley <dave.burley@accelercomm.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch fixes the marketing name of the QAT GEN3 to P5xxx.
Updates this name mentioned in the compression PMD as well as
in the documentation.
Fixes: aa983f03ad ("crypto/qat: handle Single Pass Crypto Requests on GEN3")
Fixes: a124830a6f ("compress/qat: enable dynamic huffman encoding")
Fixes: 1f5e4053f9 ("common/qat: support GEN3 devices")
Cc: stable@dpdk.org
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Document addition of event mode support
to ipsec-secgw application.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The EAL API (with doxygen documentation) is moved from
common/include/ to include/, which makes more clear that
it is the global API for all environments and architectures.
Note that the arch-specific and OS-specific include files are not
in this global include directory, but include/generic/ should
cover the doxygen documentation for them.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Apart from the 4-tuple (IP src/dst addresses and TCP/UDP src/dst
port addresses), there are only 40-bits available to match other
fields in packet headers. Not all combinations of packet header
fields can fit in the 40-bit tuple.
Currently, the combination of packet header fields to match are
configured via filterMode for LETCAM filters and filterMask for
HASH filters in firmware config files (t5/t6-config.txt). So, add
devargs to allow User to dynamically select the filterMode and
filterMask combination during runtime, without having to modify the
firmware config files and reflashing them onto the adapter. A table
of supported combinations is maintained by the driver to internally
translate the User specified devargs combination to hardware's internal
format before writing the requested combination to hardware
Signed-off-by: Karra Satwik <kaara.satwik@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Currently, we only support VF device is bound to vfio_pci or igb_uio and
then driven by DPDK driver when PF is driven by kernel mode hns3 ethdev
driver, VF is not supported when PF is driven by hns3 DPDK driver.
This patch adds promiscuous and allmulticast mode support for hns3 VF
PMD driver.
1) The promiscuous/allmulticast mode can be configured successfully only
based on the trusted VF device. If based on the non trusted VF
device, configuring promiscuous/allmulticast mode will fail. The hns3
VF device can be configured as trusted device by hns3 PF kernel
ethdev driver on the host by "ip link set <eth num> vf <vf id> turst
on" command.
2) After the promiscuous mode is configured successfully, hns3 VF PMD
driver can receive the ingress and outgoing traffic. In the words,
all the ingress packets, all the packets sent from the PF and other
VFs on the same physical port.
3) Note: Because of the hardware constraints, By default vlan filter is
enabled and couldn't be turned off based on VF device, so vlan filter
is still effective even in promiscuous mode. If upper applications
don't call rte_eth_dev_vlan_filter API function to set vlan based on
VF device, hns3 VF PMD driver will can't receive the packets with
vlan tag in promiscuous mode.
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
This patch adds TCP segment offload support for hns3 PMD driver.
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
This patch adds the new flow item RTE_FLOW_ITEM_TYPE_PFCP to flow API to
match a PFCP header.
Add sample PFCP rules for testpmd guide. Since Session Endpoint
Identifier (SEID) only will be present in PFCP Session header and PFCP
Session headers shall be identified when the S field is equal to 1, when
create rules for PFCP Session header with certain SEID the S field need
be set 1.
Signed-off-by: Xiao Zhang <xiao.zhang@intel.com>
Acked-by: Ori Kam <orika@mellanox.com>
With this patch it is possible to connect 2 DPDK memifs into loopback,
i.e. when they have the same id and different roles, as for example:
"--vdev=net_memif0,role=master,id=0"
"--vdev=net_memif1,role=slave,id=0"
Signed-off-by: Július Milan <jmilan.dev@gmail.com>
Reviewed-by: Jakub Grajciar <jgrajcia@cisco.com>
This patch adds to MLX5 PMD the support of matching on IPv4 TTL and
IPv6 hoplimit.
Support is valid when using DV flow engine (Verbs flow engine doesn't
support matching on this field).
Signed-off-by: Eli Britstein <elibr@mellanox.com>
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Remove CONFIG_RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC with below
consideration:
1. A default Rx path can always be selected by setting a proper
rx_free_thresh value at runtime, see
ice_check_rx_burst_bulk_alloc_preconditions.
2. Its not a big deal to always reserve more space for desc ring.
"ring_size = (uint16_t)(rxq->nb_rx_desc + ICE_RX_MAX_BURST);"
3. Fixes a potential invalid memory access in ice_reset_rx_queue.
If CONFIG_RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC is turned on while
ice_check_rx_burst_bulk_alloc_preconditions return fail.
Below code will have problem.
for (i = 0; i < ICE_RX_MAX_BURST; ++i)
rxq->sw_ring[rxq->nb_rx_desc + i].mbuf = &rxq->fake_mbuf;
Fixes: 50370662b7 ("net/ice: support device and queue ops")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Supporting more than 2 sub-device is a remnant from earlier fail-safe
design, that was never actually published.
Fixes: a46f8d584e ("net/failsafe: add fail-safe PMD")
Cc: stable@dpdk.org
Signed-off-by: Gaetan Rivet <grive@u256.net>
Reading the fail-safe doc with a few years added, a few phrasing
choices are ambiguous or confusing.
Signed-off-by: Gaetan Rivet <grive@u256.net>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
Add AH and AH SPI to testpmd rte flow command line.
Add note and sample AH rules in testpmd guide.
Signed-off-by: Xiao Zhang <xiao.zhang@intel.com>
Acked-by: Ori Kam <orika@mellanox.com>
Add Meson configuration to cross-compile for Windows using MinGW-w64.
It may require adjustments in some cases, but at least it provides
the foundation.
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Tested-by: William Tu <u9012063@gmail.com>
Tested-by: Pallavi Kadam <pallavi.kadam@intel.com>
MinGW-w64 linker does not mimic MS linker options, so the build system
must differentiate between linkers on Windows. Use GNU linker options
with GCC and MS linker options with Clang.
MinGW-w64 by default uses MSVCRT stdio, which does not comply to ANSI,
most notably its formatting and string handling functions. MinGW-w64
support for the Universal CRT (UCRT) is ongoing, but the toolchain
provides its own standard-complying implementation of stdio. The latter
is used in the patch to support formatting in DPDK.
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Tested-by: William Tu <u9012063@gmail.com>
Tested-by: Pallavi Kadam <pallavi.kadam@intel.com>
Start a new release cycle with empty release notes.
ABI must now be checked with v20.02 as a reference.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
When generating PDF with on an old system,
there are failures because of long tables:
vm_power_management.rst:420: ERROR: Malformed table.
Column span alignment problem in table line 5.
vm_power_management.rst:545: ERROR: Malformed table.
Column span alignment problem in table line 5.
vm_power_management.rst:754: ERROR: Malformed table.
Column span alignment problem in table line 5.
The tables (having only two columns) are replaced
with the more appropriate definition lists.
Fixes: 30d3aa861d ("doc: rework VM power manager user guide")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
There is an increase in number of issues related to supported cables and
modules, this link and note can help users identify or narrow down the
issues.
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Only the supported features are supposed to be listed
in the networking features matrix.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Remove the redundant "when used". And modify "ans" to "and".
Fixes: b21302a107 ("eventdev: add Tx flag for packets with same destination")
Fixes: 92c083915a ("doc: update release notes for 19.11")
Cc: stable@dpdk.org
Signed-off-by: Yong Wang <wang.yong19@zte.com.cn>
The no-inline hint flag is described.
Fixes: cacb44a099 ("net/mlx5: add no-inline Tx flag")
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Now that Python 2 is officially not maintained anymore, prepare the
removal of support in DPDK.
Add a deprecation notice indicating the removal schedule.
Signed-off-by: Robin Jarry <robin.jarry@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Based on the tech board meeting held on 2019-11-06,
It's been decided to move igb_uio kernel module to a new repository
hosted by dpdk.org in v20.11 release.
http://mails.dpdk.org/archives/dev/2019-November/151763.html
Adding the deprecation notice for the same in advance.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Adding the deprecation notice as reminder for next ABI breakage release
(20.11).
This one time breakage is required to be able to extend enum/define
without breaking ABI.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
The devices of the family ConnectX may have two letters as suffix.
Such suffix is preceded with a space and the second x is lowercase:
- ConnectX-4 Lx
- ConnectX-5 Ex
- ConnectX-6 Dx
Uppercase of the device family name BlueField is also fixed.
The lists of supported devices are fixed.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
When adding GTP to the list of supported tunnels,
the old line was not removed.
Fixes: f31d7a0171 ("net/mlx5: support GTP")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The new rte_flow feature for DSCP field rewrite offload was
missing in the release notes.
The mlx5 requirements for DSCP field rewrite offload were missing.
Fixes: 8482ffe4b6 ("ethdev: add IPv4/IPv6 DSCP rewrite action")
Fixes: 6f26e604a9 ("net/mlx5: support IPv4/IPv6 DSCP rewrite action")
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Fix grammar, spelling and formatting of DPDK 20.02 release notes.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
The following crypto PMDs use the Intel Multi-buffer library:
- AESNI MB PMD
- AESNI GCM PMD
- ZUC PMD
- KASUMI PMD
- SNOW3G PMD
When this library is built with gcc < 5.0, it might throw
some compilation issues. A workaround has been added in the
repo of this library, so a note on this has been added
to the documentation of these PMDs.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This doc describes how to enable DPDK on OpenWrt
in both virtual and physical x86 environment.
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
The producer head pointer in multi producer enqueue fig.6.10
points to incorrect object in the ring array.
Fixes: fc1f2750a3 ("doc: programmers guide")
Cc: stable@dpdk.org
Signed-off-by: Prateek Agarwal <prateekag@cse.iitb.ac.in>
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Updating the thunderx with loopback port support,
debugging options, new features added and correcting
some formatting issues.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
The dev_ops .get_module_info and .get_module_eeprom
were implemented in mlx5 in DPDK 19.11.
Fixes: 8a6a09f853 ("net/mlx5: support reading module EEPROM data")
Cc: stable@dpdk.org
Reported-by: Gal Cohen <galco@mellanox.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Explain how kernel driver RX buffer sizes affect the maximum
MTU size in practice.
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
This adds new device id to the list of Mellanox devices
that runs mlx5 PMD.
- BlueField-2 integrated ConnectX-6 Dx network controller
This device is not ready yet, it is in development stage.
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Add tested Intel platforms with Intel NICs to v20.02 release note.
Signed-off-by: Bo Chen <box.c.chen@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Update driver/firmware version mapping table for new driver/firmware
supported in 20.02 release.
Signed-off-by: Zhaoyan Chen <zhaoyan.chen@intel.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Add a programmer's guide section for meson ut
Signed-off-by: Hari Kumar Vemula <hari.kumarx.vemula@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Michael Santana <msantana@redhat.com>
Update the documentation on building and running apps on FreeBSD, taking
account of having used meson for building. We can also update the section
on the command-line parameters, rather than claiming to be a complete list
of parameters, it should describe how to get the complete list and only
cover a few important ones.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
The kernel modules are now installed in the correct system location on
install when using meson and ninja, so update the documentation to remove
any references to the "kmod" directory. Also, make a few additional updates
to improve clarity.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Update the FreeBSD GSG doc with instructions for installing
using meson and ninja rather than make.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Update the FreeBSD GSG to cover installing from the pre-built package as
well as installing from a port.
Also, since the port is now based on meson, update the instructions for
compiling and running the example applications.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Update the introduction section note, to add in the fact that DPDK is now
packaged in FreeBSD, i.e. available as a pre-built binary package, as well
as being in the ports collection for manual building.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Generate a dependency file for the header files used in the API guide
so that the docs can be rebuilt if a header changes.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
For the doxygen API for the examples folder, we can generate a build
dependency file when we generate the examples.dox file. This allows
correct rebuilds if the files in examples change.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Changed the rte_ring chapter in programmer's guide to reflect
the addition of rte_ring_xxx_elem APIs. References to pointers
as ring elements is changed to generic term 'objects'.
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Added introduction of rte_ring_xxx_elem APIs to release notes.
Fixes: cc4b218790 ("ring: support configurable element size")
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Service core mask should be a hexadecimal value rather than a range of
lcores.
Bugzilla ID: 392
Fixes: 55499896d9 ("doc: add event mode to l3fwd guide")
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Added support for API rte_eth_tx_done_cleanup.
Added support setting VF MAC address by PF driver.
Added support for setting the link to specific speed.
Fixes: 26e9c3e201 ("net/ixgbe: cleanup Tx buffers")
Fixes: 3c42701875 ("net/ixgbe: support VF MAC address add/remove")
Fixes: 34e7360960 ("net/ixgbe: set fixed flag for exact link speed")
Signed-off-by: Jiaqi Min <jiaqix.min@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Added support for API rte_eth_tx_done_cleanup.
Fixes: ab7cfe1fe3 ("net/ice: cleanup Tx buffers")
Signed-off-by: Jiaqi Min <jiaqix.min@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Added support for API rte_eth_tx_done_cleanup.
Added support for VF multiple queues interrupt.
Added support for setting the link to specific speed.
Fixes: 6a8defc552 ("net/i40e: cleanup Tx buffers")
Fixes: 40163f9e17 ("net/i40e: fix multi-queue Rx interrupt for VF")
Fixes: dc73db27bb ("net/i40e: set fixed flag for exact link speed")
Signed-off-by: Jiaqi Min <jiaqix.min@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Add release notes for the notification data feature of virtio-PMD.
Fixes: 7e72f3ec1a ("net/virtio: support packed ring notification data")
Signed-off-by: Cheng Jiang <cheng1.jiang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The libibverbs (and libmlx4/5) can be statically embedded
in the shared PMD library, or in the application with the static PMD.
It was supported with make build system in
commit 2c0dd7b69f ("config: add static linkage of mlx dependency").
The same feature is enabled with meson when using pkg-config
(i.e. only if the call to dependency() is successful).
The fallback method for searching library with cc.find_library()
is not supported because the dependencies of the found library
would not be linked (no such info in .a file unlike .so).
The main difference, in meson build system, is the generated .pc file
giving arguments to link DPDK with the application.
Unfortunately the .pc file will not keep memory of the static linkage
option for libibverbs.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
In current version, we are setting the ports
using portmask. With portmask, we can use only
up to 64 ports. This portlist option enables the user
to use more than 64 ports.
Now we can specify the ports in 2 different ways
- Using portmask (-p [0x]nnn): mask must be in hex format
- Using portlist in the following format
--portlist <p1>[-p2][,p3[-p4],...]
--portmask 0x2 is same as --portlist 1
--portmask 0x3 is same as --portlist 0-1
Signed-off-by: Hariprasad Govindharajan <hariprasad.govindharajan@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Herakliusz Lipiec <herakliusz.lipiec@intel.com>
Currently MLX5 PMD can't match on untagged packets specifically.
Tagged traffic still hits the flows intended for untagged packets.
If the flow has ETH, it will catch all matching packets, tagged
and untagged.
The solution is to use cvlan_tag bit.
If mask=1 and value=0 it matches on untagged traffic.
If mask=1 and value=1 it matches on tagged traffic.
This is the kernel implementation.
This patch updated MLX5 PMD to set cvlan_tag mask and value according
to flow rule contents.
This update is relevant when using DV flow engine (dv_flow_en=1).
See example at https://doc.dpdk.org/guides/nics/mlx5.html#limitations.
Fixes: fc2c498ccb ("net/mlx5: add Direct Verbs translate items")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Split recommended mapping table for X710/XL710/XXV710 and X722,
since they have different firmware versions.
Signed-off-by: Zhaoyan Chen <zhaoyan.chen@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
This commit adds release notes and updates documentation for
the cycle-count mode added to the compression performance tool.
Fixes: 2695db95a1 ("test/compress: add cycle-count mode to perf tool")
Signed-off-by: Artur Trybula <arturx.trybula@intel.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Updated release notes for the changes done in QAT for DPDK 20.02
Original commits for these features are as follows.
Fixes: 026f21c0b9 ("common/qat: support dual threads for enqueue/dequeue")
Fixes: 6cde900bd5 ("common/qat: remove tail write coalescing")
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
The word "major" was used to differentiate with release candidates
or stable maintenance releases.
However the word "major" can be understood as "LTS",
so it is less confusing to avoid this word.
Reported-by: Ori Kam <orika@mellanox.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
Rather than having to explicitly list each and every driver to disable in a
build, we can use a small python script and the python glob library to
expand out the wildcards. This means that we can configure meson using e.g.
meson -Ddisable_drivers=crypto/*,event/* build
to do a build omitting all the crypto and event drivers. Explicitly
specified drivers e.g. net/i40e, work as before, and can be mixed with
wildcarded drivers as required.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Robin Jarry <robin.jarry@6wind.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Add support for CPU accelerated crypto. 'cpu-crypto' SA type has
been introduced in configuration allowing to use abovementioned
acceleration.
Legacy mode is not currently supported.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Update library to handle CPU cypto security mode which utilizes
cryptodev's synchronous, CPU accelerated crypto operations.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Introduce CPU crypto action type allowing to differentiate between
regular async 'none security' and synchronous, CPU crypto accelerated
sessions.
This mode is similar to ACTION_TYPE_NONE but crypto processing is
performed synchronously on a CPU.
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add support for CPU crypto mode by introducing required handler.
Authenticated encryption and decryption are supported with tag
generation/verification.
CPU crypto support include both AES-GCM and GMAC algorithms.
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add new API allowing to process crypto operations in a synchronous
manner. Operations are performed on a set of SG arrays.
Cryptodevs which allows CPU crypto operation mode have to
use RTE_CRYPTODEV_FF_SYM_CPU_CRYPTO capability.
Add a helper method to easily convert mbufs to a SGL form.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Introduce SAD cache.
Stores the most recent SA in a per lcore cache.
Cache represents flat array containing SA's indexed by SPI.
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Armv8 crypto PMD linked to armv8_crypto library created by Marvell.
Maintenance of armv8_crypto library will be discontinued.
Change Armv8 PMD to link to AArch64 crypto library hosted by Arm.
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Link against Intel IPsec Multi-buffer library, which
added support for SNOW3G-UEA2 and SNOW3G-UIA2 from version v0.53,
moving from libSSO SNOW3G library.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Link against Intel IPsec Multi-buffer library, which
added support for KASUMI-F8 and KASUMI-F9 from version v0.53,
moving from libSSO KASUMI library.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Link against Intel IPsec Multi-buffer library, which
added support for ZUC-EEA3 and ZUC-EIA3 from version v0.53,
moving from libSSO ZUC library.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add support for live migration feature by the HW:
Create a single Mkey that maps the memory address space of the
VHOST live migration log file.
Modify VIRTIO_NET_Q object and provide vhost_log_page,
dirty_bitmap_mkey, dirty_bitmap_size, dirty_bitmap_addr
and dirty_bitmap_dump_enable.
Modify VIRTIO_NET_Q object and move state to SUSPEND.
Query VIRTIO_NET_Q and get hw_available_idx and hw_used_idx.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add support for the next features in virtq configuration:
VIRTIO_F_RING_PACKED,
VIRTIO_NET_F_HOST_TSO4,
VIRTIO_NET_F_HOST_TSO6,
VIRTIO_NET_F_CSUM,
VIRTIO_NET_F_GUEST_CSUM,
VIRTIO_F_VERSION_1,
These features support depends in the DevX capabilities reported by the
device.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add support for get_features and get_protocol_features operations.
Part of the features are reported by the DevX capabilities.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add a new driver to support vDPA operations by Mellanox devices.
The first Mellanox devices which support vDPA operations are
ConnectX-6 Dx and Bluefield1 HCA for their PF ports and VF ports.
This driver is depending on rdma-core like the mlx5 PMD, also it is
going to use mlx5 DevX to create HW objects directly by the FW.
Hence, the common/mlx5 library is linked to the mlx5_vdpa driver.
This driver will not be compiled by default due to the above
dependencies.
Register a new log type for this driver.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Get a burst mode information for Rx/Tx queues in mlx5.
Provide callback functions to show this information in
a "show rxq info" and "show txq info" output.
Signed-off-by: Alexander Kozyrev <akozyrev@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
thunderx-nic uses secondary VF's to provide more queues to DPDK.
Current instructions explain the concept but don't show an easy way to
find which PCI id is primary and which is secondary VF's.
This patch extending the documentation of secondary VF w.r.t
the enumeration details.
Signed-off-by: Krzysztof Kanas <kkanas@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Before C0 HW revision, The RSS adder was computed based the following
static formula.
rss_adder<7:0> = flow_tag<7:0> ^ flow_tag<15:8> ^
flow_tag<23:16> ^ flow_tag<31:24>
The above scheme has the following drawbacks:
1) It is not in line with other standard NIC behavior.
2) There can be an SW use case where SW can compute the hash
upfront using Toeplitz function and predict the queue selection
to optimize some packet lookup function. The nonstandard
way of doing XOR makes the consumer to not predict the queue selection.
C0 HW revision onward, The HW can configure the
rss_adder<7:0> as flow_tag<7:0> to align with standard NICs.
This patch adds an option to select legacy RSS adder mode
using tag_as_xor=1 devargs option while keeping the standard NIC
behavior as default.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Function of_set_vlan_vid is wrongly listed twice in table
"Supported hardware offloads".
This patch removes the listing of of_set_vlan_vid under
"Header rewrite", and leaves the listing of of_set_vlan_vid
under "VLAN".
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
API makes think that rte_cryptodev_info_get() cannot return
a value >= 3 (RTE_CRYPTO_AEAD_LIST_END in 19.11).
20.02-rc1 was returning 3 (RTE_CRYPTO_AEAD_CHACHA20_POLY1305).
So the ABI compatibility contract was broken.
It could be solved with some function versioning,
but because a lack of time, the feature is reverted for now.
This reverts following commits:
- 6c9f3b347e ("cryptodev: add Chacha20-Poly1305 AEAD algorithm")
- 2c512e64d6 ("crypto/qat: support Chacha Poly")
- d55e01f579 ("test/crypto: add Chacha Poly cases")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
For normal developers, those checks are disabled.
Enabling them requires a configuration that will trigger the ABI dumps
generation as part of the existing devtools/test-build.sh and
devtools/test-meson-builds.sh scripts.
Those checks are enabled in the CI for the default meson options on x86
and aarch64 so that proposed patches are validated via our CI robot.
A cache of the ABI is stored in travis jobs to avoid rebuilding too
often.
Checks can be informational only, by setting ABI_CHECKS_WARN_ONLY when
breaking the ABI in a future release.
Explicit suppression rules have been added on internal structures
exposed to crypto drivers as the current ABI policy does not apply to
them.
This could be improved in the future by carefully splitting the headers
content with application and driver "users" in mind.
We currently have issues reported for librte_crypto recent changes for
which suppression rules have been added too.
Mellanox glue libraries are explicitly skipped as they are not part of
the application ABI.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Update l3fwd user guide to include event device related information.
Update release notes.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
This patch adds to MLX5 PMD support of matching on GTP item,
fields msg_type and teid, according to RFC [1].
GTP item validation and translation functions are added and called.
GTP tunnel type is added to supported tunnels.
[1] http://mails.dpdk.org/archives/dev/2019-December/152799.html
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Add support for reading the firmware version.
Signed-off-by: Alfredo Cardigliano <cardigliano@ntop.org>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
Add basic, per queue and extended statistics for
RX and TX, both from the adapter and the driver.
Signed-off-by: Alfredo Cardigliano <cardigliano@ntop.org>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
Add code to manipulate the RSS configuration
used by the adapter.
Signed-off-by: Alfredo Cardigliano <cardigliano@ntop.org>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
Add support for managing RX filters based on MAC and VLAN.
Hardware cannot provide the list of filters, thus we keep
a local list.
Add support for promisc and allmulticast modes.
Signed-off-by: Alfredo Cardigliano <cardigliano@ntop.org>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
Add support for port start/stop and handle basic features
including MTU and link up/down.
Signed-off-by: Alfredo Cardigliano <cardigliano@ntop.org>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
Register the Pensando ionic PMD (net_ionic) and define initial probe
and remove callbacks with adapter initialization.
Signed-off-by: Alfredo Cardigliano <cardigliano@ntop.org>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
Add makefile and config file options to compile the Pensando ionic PMD.
Add feature and version map file.
Update maintainers file.
Signed-off-by: Alfredo Cardigliano <cardigliano@ntop.org>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
The existing optimize_object_size() function address the memory object
alignment constraint on x86 for better performance.
Different (micro) architecture may have different memory alignment
constraint for better performance and it not the same as the existing
optimize_object_size().
Some use, XOR(kind of CRC) scheme to enable DRAM channel distribution
based on the address and some may have a different formula.
Introducing arch_mem_object_align() function to abstract
the difference between different (micro) architectures to avoid
wasting memory for mempool object alignment for the architecture
that it is not required to do so.
Details on the amount of memory saving:
Currently, arm64 based architectures use the default (nchan=4,
nrank=1). The worst case is for an object whose size (including mempool
header) is 2 cache lines, where it is optimized to 3 cache lines (+50%).
Examples for cache lines size = 64:
orig optimized
64 -> 64 +0%
128 -> 192 +50%
192 -> 192 +0%
256 -> 320 +25%
320 -> 320 +0%
384 -> 448 +16%
...
2304 -> 2368 +2.7% (~mbuf size)
Additional details:
https://www.mail-archive.com/dev@dpdk.org/msg149157.html
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Starting from v20.05, rte_mempool_populate_iova() will return 0.
The ABI will be preserved through symbol versioning until 20.11.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
In prerequisites of ntb guide, the correct flag when loading igb_uio
module should be `wc_activate=1`, not `wc_active=1`.
Fixes: 11b5c7daf0 ("raw/ntb: add enqueue and dequeue functions")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Add rawdev's selftest feature in SDP VF driver, which
verifies the EP mode functionality test.
Signed-off-by: Mahipal Challa <mchalla@marvell.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Register "dev_configure" API to configure/initialize the SDP
VF PCIe devices.
Signed-off-by: Mahipal Challa <mchalla@marvell.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Add the OCTEON TX2 SDP EP device probe along with the
build infrastructure for Make and meson builds.
Signed-off-by: Mahipal Challa <mchalla@marvell.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Add warning and counter to handle the malicious driver detection (MDD)
event.
When the hardware determines that a malicious driver on VF, this VF will
become unworkable, the PF records and gives a warning message.
Signed-off-by: Tao Zhu <taox.zhu@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
DPDK now supports registration of dynamic flags (dynf) to the mbuf.
dynf can be given any name, and can be used with a supporting PMD or
supporting application.
Due to the generic concept of the dynf, it is impossible and
meaningless, to define register set/get function for each flag.
This commit introduce a generic way to register and set/clear such
flags.
The basic syntax:
port config <port id> dynf <name> <set|clear>
The first step the new flag is registered. Regardless if the action is
set or clear.
There is no way to unregister the flag, after registering it.
The second step, if the action is set then we set the requested flag.
If this is the first flag that is enabled we also register a call back
for the Tx. In this call back we set the flag.
If the action is clear the requested flag is cleared, and if there
are no more flags that are set, the call back is removed.
The reason that the set is only applied in Tx is that in case of Rx
it is assumed that the value comes from the PMD.
If log is enabled the name of the flag, and value will be printed
in the packet info.
In order for the log to work correctly the registration of the flag
must be done before setting verbose.
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
add fill_ip6_head()
hardcode udp destination port to 4500
handle ESP and AH pctypes in ESP-AH profile
update the i40e user guide with ESP information.
update release notes for i40e changes
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
add ITEM_ESP
add ITEM_ESP_SPI
update release notes for testpmd changes
add sample ESP rules in testpmd guide
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Ori Kam <orika@mellanox.com>
CONFIG_RTE_IXGBE_INC_VECTOR is enabled by default, so remove
it and use architecture specific flags.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Update supported Intel NIC driver version and firmware version for 19.11
Update supported Intel NIC driver version to 2.8.43 for 19.08 which is
widely tested.
Fixes: cb8a35c22a ("doc: update supported i40e driver and firmware version")
Cc: stable@dpdk.org
Signed-off-by: Zhaoyan Chen <zhaoyan.chen@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
At BGX, DMAC filter table can be enabled to allow defined hosts.
Patch implements 'mac_addr_add' and 'mac_addr_remove' ops to
add/remove MAC filters which uses BGX DMAC filter table.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Harman Kalra <hkalra@marvell.com>
Currently, we only support VF device is bound to vfio_pci or igb_uio and
then driven by DPDK driver when PF is driven by kernel mode hns3 ethdev
driver, VF is not supported when PF is driven by hns3 DPDK driver.
This patch adds support setting VF MAC address by hns3 PF kernel ethdev
driver on the host by "ip link set ..." command.
1) If the hns3 PF kernel ethdev driver sets the MAC address for VF
device before the initialization of the related VF device, hns3 VF
PMD driver should get the MAC address from PF driver through mailbox
and configure hardware using this MAC address in the initialization.
The hns3 VF PMD driver get the MAC address form PF driver, if
obtaining a non-zero MAC address from mailbox, VF driver will
configure hardware using it, otherwise using a random MAC address in
the initialization of VF device.
2) If the hns3 PF kernel ethdev driver sets the MAC address for VF
device after the initialization of the related VF device, the PF
driver will notify VF driver to reset VF device to make the new MAC
address effective immediately. The hns3 VF PMD driver should check
whether the MAC address has been changed by the PF kernel netdevice
driver, if changed VF driver should configure hardware using the new
MAC address in the recovering hardware configuration stage of the
reset process.
3) When user has configured a mac address for VF device by "ip link set
..." command based on the PF device, the hns3 PF kernel ethdev driver
does not allow VF driver to request reconfiguring a different default
mac address and return -EPREM to VF driver through mailbox.
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Adding FDIR support for L2TPv3 over IP header matching and adding
a new customized pctype for l2tpv3 over IP.
Signed-off-by: Rory Sexton <rory.sexton@intel.com>
Signed-off-by: Dariusz Jagus <dariuszx.jagus@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This patch adds the new flow item RTE_FLOW_ITEM_TYPE_L2TPV3OIP to
flow API to match a L2TPv3 over IP header. This patch supports only
L2TPv3 over IP header format which is different to L2TPv2/L2TPv3
over UDP. The difference in header formats between L2TPv3 over IP
and L2TP over UDP require a separate implementation for each.
Signed-off-by: Rory Sexton <rory.sexton@intel.com>
Signed-off-by: Dariusz Jagus <dariuszx.jagus@intel.com>
Acked-by: Ori Kam <orika@mellanox.com>
For some overlay network, such as VXLAN, the DSCP field in the new outer
IP header after VXLAN decapsulation may need to be updated accordingly.
This commit introduce the DSCP modify action for IPv4 and IPv6.
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ori Kam <orika@mellanox.com>
This patch adds supports of receive packets through interrupt mode for
hns3 PF/VF driver. The following ops functions should be implemented
defined in the struct eth_dev_ops:
rx_queue_intr_enable
rx_queue_intr_disable
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
This patch implements the feature described in RFC [1], adding
support of RSS action on L3 and/or L4 source or destination only.
[1] http://mails.dpdk.org/archives/dev/2019-December/152796.html
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Patch adds a runtime function to display the unicast and
multicast MAC addresses added to a port.
Syntax:
show port (port_id) macs|mcast_macs
Usage:
testpmd> show port 0 macs
Number of MAC address added: 1
B0:26:28:7F:F5:C1
testpmd>
testpmd> show port 0 mcast_macs
Number of Multicast MAC address added: 0
testpmd>
testpmd> mac_addr add 0 B0:26:28:7F:22:33
testpmd> mac_addr add 0 B0:26:28:7F:22:34
testpmd> show port 0 macs
Number of MAC address added: 3
B0:26:28:7F:F5:C1
B0:26:28:7F:22:33
B0:26:28:7F:22:34
testpmd>
testpmd> mac_addr remove 0 B0:26:28:7F:22:33
testpmd> show port 0 macs
Number of MAC address added: 2
B0:26:28:7F:F5:C1
B0:26:28:7F:22:34
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch implements handling mixed encrypted digest hash-cipher
requests (e.g. SNOW3G + ZUC or ZUC + AES CTR) possible when running
on GEN3 QAT. Such algorithm combinations are not supported on
GEN1/GEN2 hardware.
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
This patch adds minimum enqueue threshold to Intel
QuickAssist Technology PMD.
It is an optimisation, configured by a command line option,
which can be used to reduce MMIO write occurrences.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Remove the limitation whereby enqueue and dequeue must be
done in same thread.
The inflight calculation is reworked to be thread-safe for 2
threads - note this is not general multi-thread support, i.e
all enqueues to a qp must still be done in one thread and
all dequeues must be done in one thread, but enqueues and
dequeues may be in separate threads.
Documentation updated.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Add support for asymmetric operation EC Point Multiplication,
in crypto_octeontx PMD.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Balakrishna Bhamidipati <bbhamidipati@marvell.com>
Signed-off-by: Sunila Sahu <ssahu@marvell.com>
Asymmetric crypto library is extended to add ECPM (Elliptic Curve Point
Multiplication). The required xform type and op parameters are
introduced.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Balakrishna Bhamidipati <bbhamidipati@marvell.com>
Signed-off-by: Sunila Sahu <ssahu@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The rte_wait_until_equal_xx APIs abstract the functionality of
'polling for a memory location to become equal to a given value'.
Add the RTE_ARM_USE_WFE configuration entry for aarch64, disabled
by default. When it is enabled, the above APIs will call WFE instruction
to save CPU cycles and power.
From a VM, when calling this API on aarch64, it may trap in and out to
release vCPUs whereas cause high exit latency. Since kernel 4.18.20 an
adaptive trapping mechanism is introduced to balance the latency and
workload.
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Steve Capper <steve.capper@arm.com>
Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
When building the API docs, we can make the meson.build file easier to
read, and allow more code per line, by using subdir_done() to quit early.
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Add proper support for calling sphinx whenever a file in the doc
directory changes. This is accomplished by using a wrapper script
for sphinx, which runs sphinx but also emits a gcc-format dependency
file listing all the doc files. This is used by ninja so that any
change to the doc files triggers a rebuild of the docs.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
For building the guides, we can make the meson.build easier to read by
using the subdir_done function to quit early.
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
