Add support for rdma-core API to import device.
The API gets ibv_context file descriptor and returns an ibv_context
pointer that is associated with the given file descriptor.
Add also support for rdma-core API to import PD.
The API gets ibv_context and PD handle and returns a protection domain
(PD) that is associated with the given handle in the given context.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
The functions which are not explicitly marked as internal
were exported because the local catch-all rule was missing in the
version script.
After adding the missing rule, all local functions are hidden.
The function mlx5_get_device_guid is used in another library,
so it needs to be exported (as internal).
Because the local functions were exported as non-internal
in DPDK 21.11, any change in these functions would break the ABI.
An ABI exception is added for this library, considering that all
functions are either local or internal.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
This patch adds matching on the optional fields (checksum/key/sequence)
of GRE header. The matching on checksum and sequence fields requests
support from rdma-core with the capability of misc5 and tunnel_header 0-3.
For patterns without checksum and sequence specified, keep using misc for
matching as before, but for patterns with checksum or sequence, validate
capability first and then use misc5 for the matching.
Signed-off-by: Sean Zhang <xiazhang@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Add CNF95xx B0 variant to the list of supported models.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Validate sq_node and parent before accessing their fields.
SQ was created without any associated TM node, this is valid negative
case, so return success while stopping TM without SQ node.
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
cnxk platforms supports packet marking when TM enabled with
valid shaper rates. VLAN DEI, IP ECN, or IP DSCP inside
packet will be updated based on mark flags selected.
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
When reassembly is enabled by application, set corresponding
flags in SA during creation.
Provide ROC API to configure reassembly unit with active and
zombie limits and step size.
Signed-off-by: Vidya Sagar Velumuri <vvelumuri@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add support for soft expiry notification mechanism in outbound
path by creating required number of ring buffers and a common poll
thread which polls for soft expiry events enqueued by microcode.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Model is uniquely identified by 4 numbers. Print them all in case
model being populated is not on a list of known models. This makes
debugging a bit easier.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jakub Palider <jpalider@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add cn10k specific Rx xstats of bandwidth profile,
CPT and IPsec counters.
Signed-off-by: Rahul Bhansali <rbhansali@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
The patch provides check for send scheduling on time hardware capability.
With this capability enabled hardware is able to handle Wait WQEs
with directly specified timestamp values. No Clock Queue is needed
anymore to handle send scheduling.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Add support for inline inbound SPI range via devargs
instead of just max SPI value and range being 0..max.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Fix inline device RQ tagmask to get packets with receive errors
as type ETHDEV packets to callback handler so that packet buffers
can get freed. Currently only IPsec denied packets get the right
tag mask.
Fixes: ee48f711f3 ("common/cnxk: support NIX inline inbound and outbound setup")
Cc: stable@dpdk.org
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Removed roc NPC APIs which tracks addition and deletion of
mark actions. It was earlier needed to track number of mark
actions added as part of flow rules. If mark actions count
is > 0, then the function pointer for Rx would get updated
to even read mark value from CQE/WQE and populate in mbuf.
Now the same switch is done based on new Rx meta data negotiate
ethdev API.
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Allow force use of SSO device even when inline dev is available
so that in case driver needs events directly delivered to
event device.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Enable time counter based threshold for raising SSO
EXE_INT instead of IAQ threshold. Time counter based
threshold helps getting periodic interrupts and process
pkts in burst instead of getting HW to raise an interrupt
for every new work.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add support to enable AURA tail drop via RQ specifically
for inline device RQ's pkt pool. This is better than RQ
RED drop as it can be applied to all RQ's that are not
having security enabled but using same packet pool.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Enable the field in SA to write back L2, L3 headers in case
of errors during inline processing.
Signed-off-by: Vidya Sagar Velumuri <vvelumuri@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Use common SA init API before doing initialization based on
params. This is better so that all HW specific default values
are at single place for lookaside and inline.
Signed-off-by: Vidya Sagar Velumuri <vvelumuri@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Update the inline device functions to work when roc_nix is NULL.
This is required, as IPsec driver have to use these APIs to work
with inline IPsec device, but the IPsec driver might not have roc_nix
information.
Signed-off-by: Vidya Sagar Velumuri <vvelumuri@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Provide a method to get floor values for a requested shaper rate,
which can assure packets should never be transmitted at a rate higher
than configured.
Keep the old API to get HW suggested values.
And introduce new parameter to select appropriate API.
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add support to realloc inline device XAQ AURA with more
buffers of new packet pool AURA.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
CN10K supports up to 832 resources at SMQ level, so increase
bitmap count to 1024.
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
CNXK platforms support priority flow control(802.1qbb) to pause
respective traffic per class on that link.
Adds RoC interface to configure priority flow control on MAC
block i.e. CGX on cn9k and RPM on cn10k.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
The "tx_db_nc" devarg forces doorbell register mapping to non-cached
region eliminating the extra write memory barrier. This argument was
used in creating the UAR for Tx and thus affected its performance.
Recently [1] its use has been extended to all UAR creation in all mlx5
drivers, and now its name is no longer so accurate.
This patch changes its name to "sq_db_nc" to suit any send queue that
uses it. The old name will still work for backward compatibility.
[1] commit 5dfa003db5 ("common/mlx5: fix post doorbell barrier")
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Reviewed-by: Raslan Darawsheh <rasland@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
One of the E-Switch vports plays the special role - it is assigned as
"E-Switch manager" and has some special exclusive rights and duties - it
maintains all the representors, manages FDB domain flows, etc. By
default, the E-Switch vport index was supposed to be zero on standalone
NICs (regular ConnectX) and 0xFFFE SmartNIC (BlueField), but that was
not always correct - this index can be assigned with any value by
kernel/hypervisor.
Currently the E-Switch manager vport id is supposed to be default - 0
for standalone NICs, and 0xFFFE for the SmartNICs, and is deduced from
the device PCI id.
To handle this and do not suggest any default values, can use DevX API
to query E-Switch manager vport ID directly from the firmware during
initialization, and use that value by default. If the new method is not
provided (legacy firmware), fallback to use the PCI id approach.
Fixes: a564038699 ("net/mlx5: support E-Switch manager egress traffic match")
Cc: stable@dpdk.org
Signed-off-by: Shun Hao <shunh@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
VDPA driver creates two QPs(1 queue pair include 1 send queue
and 1 receive queue) per virtio queue to get traffic events
from NIC to SW.
Two QPs(called FW QP and SW QP) are created as loopback QP
and FW QP'SQ is connected to SW QP'RQ internally.
When packet receive or send out, HW will send WQE by FW QP'SQ,
then SW will get CQE from the CQ of SW QP.
With large scale and heavy traffic, the SQ's request may fail
to get ACK from RQ HW, because HW is busy.
SQ will retry the request with qpc.retry_count times and each time
wait for 4.096 uS *2^(ack_timeout) for the response. If still can’t
get RQ’s HW response, SQ will go to an error state.
16 is experienced value. It should not be too high or too low.
Too high will make QP waits too long in case it’s packet drop.
Too low will cause QP to go to an error state(retry-exceeded) easily.
Fixes: 15c3807e86 ("common/mlx5: support DevX QP operations")
Cc: stable@dpdk.org
Signed-off-by: Yajun Wu <yajunw@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Improve the devargs handling in two aspects:
- Parse the devargs string only once.
- Return error and report for unknown keys.
The common driver parses once the devargs string into a dictionary, then
provides it to all the drivers' probe. Each driver updates within it
which keys it has used, then common driver receives the updated
dictionary and reports about unknown devargs.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
MLX5 common driver supports probing again in two scenarios:
- Add new driver under existing device. common probe function gets
it in devargs, then calls the requested driver's probe function
(regardless of the driver's own support in probing again) with the
existing device as parameter.
- Transfer the probing again support of the drivers themselves
(currently only net). In this scenario, the existing device is sent
as a parameter to the existing driver's probe too.
In both cases it gets a new set of arguments that do not necessarily
match the configured arguments in the existing device.
Some of the arguments belong to the configuration of the existing
device, so they can't be updated in the probing again. On the other
hand, there are arguments that belong to a specific driver or specific
port and might get a new value in the probing again.
The user might generate any argument he wants in probing again, but when
he generates arguments belonging to the common device configuration, it
does not affect.
This patch adds an explicit check for the devargs belonging to the
common device configuration. If there is no match to the existing
configuration, it returns an error.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
The check if device is VF work for Linux as same as Windows.
This patch removes it to the function implemented in the folder shared
between the operating systems, removing the duplication.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
One may set RECIRC_ID in a MAE action rule specification.
This field is not a network one, and its handling goes
to the code snippet which does not recognise field
sizes other than 4 bytes. Add the missing handler.
Fixes: 3a73dcfdb2 ("common/sfc_efx/base: match on recirc ID in action rules")
Cc: stable@dpdk.org
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Recirculation ID field of MAE outer rule insert MCDI is
part of the lookup control structure and it has non-zero
bit offset relative to the byte offset of the structure.
Fixes: 5cf153e79c ("common/sfc_efx/base: support recirculation ID in outer rules")
Cc: stable@dpdk.org
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Adding changes to enable keep flow rule device capability.
With this change, flow rules will be kept across device restart.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Reviewed-by: Satheesh Paul <psatheesh@marvell.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
The x->len is passed as argument to npc_prep_mcam_ldata().
In the function, the len is used to reference elements of
int_info and int_info_mask array.
The arrays are of length NPC_MAX_EXTRACT_DATA_LEN.
Validating the x->len value so that it is not greater than
NPC_MAX_EXTRACT_DATA_LEN.
This patch also resolves warning observed with gcc 12 compiler.
log:
../drivers/common/cnxk/roc_npc_utils.c:13:26: warning: writing 16 bytes
into a region of size 0 [-Wstringop-overflow=]
ptr[idx] = data[len - 1 - idx];
../drivers/common/cnxk/roc_npc_utils.c:163:17: note: at offset 64 into
destination object ‘int_info’ of size 64
uint8_t int_info[NPC_MAX_EXTRACT_DATA_LEN];
Bugzilla ID: 854
Fixes: 665b6a7400 ("common/cnxk: add NPC helper API")
Cc: stable@dpdk.org
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Reviewed-by: Kiran Kumar K <kirankumark@marvell.com>
An errata exists whereby NIX may incorrectly overwrite the value in
NIX_SQ_CTX_S[SQ_INT]. This may cause set interrupts to get cleared or
causing an QINT when no error is outstanding.
As a workaround, software should always read all SQ debug registers
and not just rely on NIX_SQINT_E bits set in NIX_SQ_CTX_S[SQ_INT].
Also for detecting SQB faults software must read SQ context and
check id next_sqb is NULL.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Egress rules do not have a base steering rule and the
current base steering rule is applicable only for ingress
rules. Hence, when creating a flow rule, merge base steering
rule only for ingress rules.
Fixes: f9af908074 ("common/cnxk: add mcam utility API")
Cc: stable@dpdk.org
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Reviewed-by: Kiran Kumar K <kirankumark@marvell.com>
Changed log level from info to debug for a couple of log
messages printed during MCAM allocation.
Fixes: 1f66919817 ("common/cnxk: improve MCAM entries management")
Cc: stable@dpdk.org
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Reviewed-by: Kiran Kumar K <kirankumark@marvell.com>
When a flow is deleted, the counters are deleted without
being cleared first. This results in counter values being
retained and shown in flows created later. Hence, counter
is cleared before being deleted.
Updated driver to clear and delete counters upon flow deletion.
Fixes: a07f7ced43 ("common/cnxk: add NPC init and fini")
Cc: stable@dpdk.org
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Added null check in IPv6 flow pattern parsing.
Fixes: 474e275b1b ("common/cnxk: support extensions attributes in IPv6 item")
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
This commit refactors asummetric crypto functions
in Intel QuickAssist Technology PMD.
Functions right now are shorter and far easier readable,
plus it facilitates addition of new algorithms.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
This patch unifies QAT's raw dp api implementations
to the same enqueue/dequeue methods used in crypto operations.
The specific functions for different QAT generation are updated
respectively. The qat_sym_hw_dp.c is removed as no longer required.
Signed-off-by: Kai Ji <kai.ji@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
This patch enable the op_build_request function in
qat_enqueue_op_burst, and the qat_dequeue_process_response
function in qat_dequeue_op_burst.
The op_build_request invoked in crypto build request op is based
on crypto operations setup'd during session init.
Signed-off-by: Kai Ji <kai.ji@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
This patch removes qat_asym_pmd.c and integrates all the
functions into qat_asym.c. The unified/integrated asym crypto
pmd functions should make them easier to maintain.
Signed-off-by: Kai Ji <kai.ji@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
This patch removes qat_sym_pmd.c and integrates all the functions into
qat_sym.c. The unified/integrated qat sym crypto pmd functions should
make them easier to maintain.
Signed-off-by: Kai Ji <kai.ji@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
This patch reworks the asymmetric crypto data path
implementation in QAT driver. The changes include asymmetric
crypto data path separation for QAT hardware generations, and
code optimisation of the device capabilities declaration.
Signed-off-by: Kai Ji <kai.ji@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
This patch introduce build request and dequeue op function
pointers to the qat queue pair implementation. The function
pointers are assigned during qat session generation based on input
crypto operation request.
Signed-off-by: Kai Ji <kai.ji@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Store and reuse workslot status for TT, GRP and HEAD status
instead of reading from GWC as reading from GWC imposes
additional latency.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
DPAA1 and DPAA2 platforms use SEC ERA 8 and 10 only.
Hence, code related to old SEC-ERA (1-7) is removed.
This patch removes code in SDAP and PDCP header related to these
ERA to simplify the codebase:
- Simplify logic using RTA_SEC_ERA_<> macro
- Remove era_2_sw_hfn_ovrd dedicated to RTA_SEC_ERA_2
Signed-off-by: Franck Lenormand <franck.lenormand@nxp.com>
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Pending queue also need to be adjusted while updating the number of
descriptors.
Fixes: a455fd869c ("common/cnxk: align CPT queue depth to power of 2")
Cc: stable@dpdk.org
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Tx command is prepared based on offloads enabled and stored in
Tx queue structure at tx_queue_setup phase.
In fastpath the command is copied from Tx queue to LMT line for
all the packets.
Since, the command contents are mostly constants we can move the
command preparation to fastpath and avoid accessing Tx queue
memory.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Functions like free, rte_free, and rte_mempool_free
already handle NULL pointer so the checks here are not necessary.
Remove redundant NULL pointer checks before free functions
found by nullfree.cocci
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Riverhead boards support spreading traffic across the
specified number of queues without using indirections.
This mode is provided by a dedicated RSS context type.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
On Riverhead boards, the client can control how many entries
to have in the indirection table of an exclusive RSS context.
Provide the new parameter to clients and indicate its bounds.
Extend the API for writing the table to have the flexibility.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
In the existing code, "n" is hardly a clear name for that.
Use a clearer name to help future maintainers of the code.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
On Riverhead boards, clients can query the limit on how many
queues an RSS context may address. Put the capability to use.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Remove the incomplete cplusplus guard in internal headers.
Fixes: 7525ebd8eb ("common/mlx5: add glue functions on Windows")
Signed-off-by: Weiguo Li <liwg06@foxmail.com>
Meson 0.61.1 is giving warnings that the calls to run_command do not
always explicitly specify if the result is to be checked or not, i.e.
there is a missing "check" parameter. This is because the default
behaviour without the parameter is due to change in the future.
We can fix these warnings by explicitly adding into each call whether
the result should be checked by meson or not. This patch therefore
adds in "check: false" to each run_command call where the result is
being checked by the DPDK meson.build code afterwards, and adds in
"check: true" to any calls where the result is currently unchecked.
Bugzilla ID: 921
Cc: stable@dpdk.org
Reported-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Jerin Jacob <jerinj@marvell.com>
While probing the device with unsupported class, the process should
fail because no appropriate driver was found. After traversing all
the drivers, an error value should be returned for the case.
In the previous implementation, zero value indicating probing success
was wrongly returned.
Fixes: ad435d3204 ("common/mlx5: add bus-agnostic layer")
Cc: stable@dpdk.org
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Memory region (MR) lookup by address inside mempool MRs
was not accounting for the upper bound of an MR.
For mempools covered by multiple MRs this could return
a wrong MR LKey, typically resulting in an unrecoverable
TxQ failure:
mlx5_net: Cannot change Tx QP state to INIT Invalid argument
Corresponding message from /var/log/dpdk_mlx5_port_X_txq_Y_index_Z*:
Unexpected CQE error syndrome 0x04 CQN = 128 SQN = 4848
wqe_counter = 0 wq_ci = 9 cq_ci = 122
This is likely to happen with --legacy-mem and IOVA-as-PA,
because EAL intentionally maps pages at non-adjacent PA
to non-adjacent VA in this mode, and MLX5 PMD works with VA.
Fixes: 690b2a88c2 ("common/mlx5: add mempool registration facilities")
Cc: stable@dpdk.org
Reported-by: Wang Yunjian <wangyunjian@huawei.com>
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Reviewed-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Updates nix_dump and npa_dump to use plt_dump function.
Signed-off-by: Rahul Bhansali <rbhansali@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Improve inbound inline error handling for CN9K in terms of
packet delivered to application for different kinds of errors.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
An errata exists whereby, in certain cases NIX may use an
incorrect QINT_IDX for SQ interrupts. As a result, the
interrupt may not be delivered to software, or may not be
associated with the correct SQ.
When NIX uses an incorrect QINT_IDX :
1. NIX_LF_QINT(0..63)_CNT[COUNT] will be incremented for
incorrect QINT.
2. NIX_LF_QINT(0..63)_INT[INTR] will be set for incorrect
QINT.
Fixes: ae06070901 ("common/cnxk: add NIX Tx queue management API")
Cc: stable@dpdk.org
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
LF's error debug registers like NIX_LF_SQ_OP_ERR_DBG,
NIX_LF_MNQ_ERR_DBG, NIX_LF_SEND_ERR_DBG captures debug
info for an error detected during LMT operation or meta
enqueue or after meta enqueue granted respectively. HW
sets a valid bit when info is captured and SW is expected
to clear this valid bit by writing 1, else these registers
will show stale values of first interrupt when occurred and
will never update with subsequent interrupts.
Fixes: f6d567b03d ("common/cnxk: support NIX IRQ")
Cc: stable@dpdk.org
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
In shaper profiles cleanup, Klockwork static analyzer tool reports
infinite loop although existing loop condition is alright.
False positive may be due to tqh_first not checked in loop,
hence switching to FOREACH_SAFE to make Klockwork happy.
Signed-off-by: Gowrishankar Muthukrishnan <gmuthukrishn@marvell.com>
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Fix shift offset for length disable flag in NIXX_AF_TL3X_SHAPE
register to be 24 instead of zero similar to other level SHAPE
registers. Also mask unused bits in adjust value.
Fixes: 0885429c30 ("common/cnxk: add NIX TM hierarchy enable/disable")
Cc: stable@dpdk.org
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Support matching existence of specific extension headers
after RTE_FLOW_ITEM_TYPE_IPV6 item.
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Reviewed-by: Kiran Kumar K <kirankumark@marvell.com>
Support matching existence of VLAN after
RTE_FLOW_ITEM_TYPE_ETH and RTE_FLOW_ITEM_TYPE_VLAN items.
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Reviewed-by: Kiran Kumar K <kirankumark@marvell.com>
Add ROC API for parsing custom pre_l2 headers as raw data.
Only relative offset is supported and search and limit is
not supported with this raw item type.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Reviewed-by: Satheesh Paul <psatheesh@marvell.com>
Adding changes to configure switch header type pre_l2 for cnxk.
pre_l2 headers are custom headers placed before the ethernet
header. Along with switch header type, user needs to provide the
offset within the custom header that holds the size of the
custom header and mask for the size within the size offset.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Reviewed-by: Satheesh Paul <psatheesh@marvell.com>
Update meter algorithm in NIX's band profile structure.
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Acked-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Adds roc APIs roc_nix_cq_head_tail_get(), roc_nix_sq_head_tail_get()
to get tail and head of receive and transmit queue respectively.
Signed-off-by: Rahul Bhansali <rbhansali@marvell.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Use LMTST (Large atomic block store) burst as a performance optimization
when more than 15 pointers are requested to be freed.
Signed-off-by: Ashwin Sekhar T K <asekhar@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
When multicast promiscuous was being enabled it caused the unicast
promiscuous to be disabled. This fix resolves this by setting
NIX_RX_MODE_PROMISC when eth_dev->data->promiscuous is set, regardless.
Fixes: 325d79c00a ("net/cnxk: support all multicast")
Cc: stable@dpdk.org
Signed-off-by: Asaf Ravid <aravid@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add support for the imissed counter using the DevX API on Windows.
imissed is queried by creating a queue counter for the port, attaching
it to all created RQs and querying the "out_of_buffer" field.
If the counter cannot be created, imissed will always report 0.
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
The rte_kvargs_parse function parses the arguments
"key=value,key=value,..." string and return an allocated structure that
contains a key/value list.
It enables also to send a key without value and updates the values in
the following ways:
- "key=value,key,..." - value is updated as NULL.
- "key=value,key=,..." - value is updated as "" (empty string).
Mlx5 PMDs use this function to parse, but they don't support key without
value. They send the value as an argument to strtol function.
When strtol gets NULL as a parameter it cause a crash, when it gets ""
(empty string) it returns 0.
Adds a check that will prevent an argument in these formats, and returns
an error for it.
Fixes: 8520992403 ("common/mlx5: share memory related devargs")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
The common drivers_probe function calls in a loop to all probe functions
for classes requested by the user. After it manages to probe them all,
it updates this on the device in the "classes_loaded" field.
If one of them fails, all those probed to it are remove using the
drivers_remove function. However, this function only releases the
classes in the "classes_loaded" field on the given device and misses the
newly probed classes.
This patch removes the condition from the release function, and ensures
that the caller function sends a more accurate parameter.
Fixes: 8a41f4decc ("common/mlx5: introduce layer for multiple class drivers")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
ROC changes to support setting channel mask for SDP interfaces.
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Wait for XAQ pool to get filled with the freed pointers
before proceeding.
Signed-off-by: Ashwin Sekhar T K <asekhar@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Wait for SQB pool to get filled with the freed pointers
before proceeding.
Signed-off-by: Ashwin Sekhar T K <asekhar@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add roc_npa_aura_op_available_wait() API which can be used to wait
until an NPA pool gets filled up to a certain count of pointers.
Signed-off-by: Ashwin Sekhar T K <asekhar@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Use arch_extension instead of .cpu directive in NPA assembly code
snippets. Using .cpu directive with generic causes it to override
the micro architecture selected by march,mcpu.
For example if march=armv8.5-a+crypto+sve2 provided then the .cpu
directive overrides it to generic+crypto+sve2, use arch_extension
to get the expected result.
Signed-off-by: Ashwin Sekhar T K <asekhar@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Before issuing the batch alloc, we clear the first word of
cache lines so that NPA can update the status. Make sure that
this line clear is flushed before the batch alloc is issued.
Signed-off-by: Ashwin Sekhar T K <asekhar@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
When PLT_CACHE_LINE_SIZE is set to 64B, the memzone size reserved for
NPA stack could be a multiple of 64B. In such a case, when NDC SYNC
is initiated for the NPA LF, it could go and corrupt an additional
64B bytes as NDC flushes in multiples of ROC cache line size (128B).
So ensure that NPA stack size requested is a multiple of 128B.
Signed-off-by: Ashwin Sekhar T K <asekhar@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Fix the order in which layer flags and layer type fields
are parsed when dumping the MCAM data.
Fixes: 9869c39918 ("common/cnxk: support flow entry dump")
Cc: stable@dpdk.org
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Some devices have a WQE size limit for striding RQ. On some newer
devices, this limitation is smaller and information on its size is
provided by the firmware.
This patch adds the attribute query from firmware: the minimum required
size of WQE buffer for striding RQ in granularity of Bytes.
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
For cn9k, use HW GEN IV as default and add per pkt IV
in lookaside IPsec debug mode. Debug mode helps to verify
lookaside PMD using known outbound vectors in lookaside
autotest.
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Print more info when command timeout happens. Print software and
hardware queue information.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
The memory would be updated by hardware. Use atomics to read the same.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Copy DF/DSCP fields would get set based on ipsec_xform in the code
preceding this. Setting it again would cause the options to be reset.
Fixes: 78d03027f2 ("common/cnxk: add IPsec common code")
Cc: stable@dpdk.org
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
MISC CPT instruction behaves differently based on minor opcode.
Define the missing minor opcodes for MISC major opcode.
Signed-off-by: Aakash Sasidharan <asasidharan@marvell.com>
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Use the XAQ AURA create and free API while initializing the
inline device.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Due to an errata writing to vWQE flush register might hang NIX.
Add workaround for vWQE flush hang by waiting for the max
coalescing timeout to flush out any pending vWQEs.
Fixes: ee48f711f3 ("common/cnxk: support NIX inline inbound and outbound setup")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add external clock support for cnxk timer adapter.
External clock mapping is as follows:
RTE_EVENT_TIMER_ADAPTER_EXT_CLK0 = TIM_CLK_SRC_10NS,
RTE_EVENT_TIMER_ADAPTER_EXT_CLK1 = TIM_CLK_SRC_GPIO,
RTE_EVENT_TIMER_ADAPTER_EXT_CLK2 = TIM_CLK_SRC_PTP,
RTE_EVENT_TIMER_ADAPTER_EXT_CLK3 = TIM_CLK_SRC_SYNCE,
TIM supports clock input from external GPIO, PTP, SYNCE clocks.
Input resolution is adjusted based on CNTVCT frequency for better
estimation.
Since TIM is unaware of input clock frequency, application is
expected to pass the frequency.
Example:
-a 0002:0e:00.0,tim_eclk_freq=122880000-0-0
The order of frequencies above is GPIO-PTP-SYNCE.
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Minimum supported interval should now be retrieved from
mailbox based on the clock source and clock frequency.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
As per the deprecation notice, In the view of enabling unified driver
for octeontx2(cn9k)/octeontx3(cn10k), removing drivers/octeontx2
drivers and replace with drivers/cnxk/ which
supports both octeontx2(cn9k) and octeontx3(cn10k) SoCs.
This patch does the following
- Replace drivers/common/octeontx2/ with drivers/common/cnxk/
- Replace drivers/mempool/octeontx2/ with drivers/mempool/cnxk/
- Replace drivers/net/octeontx2/ with drivers/net/cnxk/
- Replace drivers/event/octeontx2/ with drivers/event/cnxk/
- Replace drivers/crypto/octeontx2/ with drivers/crypto/cnxk/
- Rename config/arm/arm64_octeontx2_linux_gcc as
config/arm/arm64_cn9k_linux_gcc
- Update the documentation and MAINTAINERS to reflect the same.
- Change the reference to OCTEONTX2 as OCTEON 9. Old release notes and
the kernel related documentation is not accounted for this change.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Ruifeng Wang <ruifeng.wang@arm.com>
Memory region (MR) was being looked up incorrectly
for the data address of an externally-attached mbuf.
A search was attempted for the mempool of the mbuf,
while mbuf data address does not belong to this mempool
in case of externally-attached mbuf.
Only attempt the search:
1) for not externally-attached mbufs;
2) for mbufs coming from MPRQ mempool;
3) for externally-attached mbufs from mempools
with pinned external buffers.
Fixes: 08ac03580e ("common/mlx5: fix mempool registration")
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Reviewed-by: Matan Azrad <matan@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Removing the use of driver following PMD as its unnecessary.
Cc: stable@dpdk.org
Signed-off-by: Sean Morrissey <sean.morrissey@intel.com>
Signed-off-by: Conor Fogarty <conor.fogarty@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Remove the use of double "the" as it does not make sense.
Cc: stable@dpdk.org
Signed-off-by: Sean Morrissey <sean.morrissey@intel.com>
Signed-off-by: Conor Fogarty <conor.fogarty@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Memory regions (MRs) were allocated in one chunk of memory with a
mempool registration object. However, MRs can be reused among
different mempool registrations.
When the registration that allocated the MRs originally was
destroyed, the dangling pointers to the MRs could be left in other
registrations sharing these MRs.
Splitting the memory allocation of registration structure and MRs in
this commit solves this pointer reference issue.
Fixes: 690b2a88c2 ("common/mlx5: add mempool registration facilities")
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Reviewed-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Mempool registration was not correctly processing
mempools with RTE_PKTMBUF_F_PINEND_EXT_BUF flag set
("pinned mempools" for short), because it is not known
at registration time whether the mempool is a pktmbuf one,
and its elements may not yet be initialized to analyze them.
Attempts had been made to recognize such pools,
but there was no robust solution, only the owner of a mempool
(the application or a device) knows its type.
This patch extends common/mlx5 registration code
to accept a hint that the mempool is a pinned one
and uses this capability from net/mlx5 driver.
1. Remove all code assuming pktmbuf pool type
or trying to recognize the type of a pool.
2. Register pinned mempools used for Rx
and their external memory on port start.
Populate the MR cache with all their MRs.
3. Change Tx slow path logic as follows:
3.1. Search the mempool database for a memory region (MR)
by the mbuf pool and its buffer address.
3.2. If not MR for the address is found for the mempool,
and the mempool contains only pinned external buffers,
perform the mempool registration of the mempool
and its external pinned memory.
3.3. Fall back to using page-based MRs in other cases
(for example, a buffer with externally attached memory,
but not from a pinned mempool).
Fixes: 690b2a88c2 ("common/mlx5: add mempool registration facilities")
Fixes: fec28ca0e3 ("net/mlx5: support mempool registration")
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Reviewed-by: Matan Azrad <matan@nvidia.com>
Reviewed-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
The "mlx5_devx_cmd_mkey_create" DevX cmd allocates DevX object using
mlx5_malloc and then creates MKey using glue function.
Compatibly, "mlx5_devx_cmd_destroy" cmd releases first the MKey using
glue function, and then free the DevX object using mlx5_free.
On Windows OS, the reg_mr function creates Mkey using
"mlx5_devx_cmd_mkey_create" cmd, but dereg_mr function using directly
glue function without freeing the object.
This behavior causes memory leak at each MR release.
In addition, the dereg_mr function makes sure that the MR pointer is
valid before destroying its fields, but always calls the memset function
that makes a difference to it.
This patch moves the dereg_mr function to use "mlx5_devx_cmd_destroy"
instead of glue function, and extends the validity test to the whole
function.
Fixes: ba42071982 ("common/mlx5: add reg/dereg MR on Windows")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
To detect the timestamp mode configured on the NIC the mlx5 PMD uses the
firmware command ACCESS_REGISTER_USER.
The HCA capability command has an attribute flag checking whether
firmware supports the command.
However, the HCA capability query command read the flag from wrong place
in PRM structure.
This patch move the flag to correct place.
Fixes: 972a1bf812 ("common/mlx5: fix user mode register access command")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
In a tunnel packet, these actions affect the inner header if
action DECAP is set; otherwise, they affect the outer header.
Adding these actions is done in two steps: add the action to
the action mask and indicate the MAC address entry ID to use.
This allows the user to check the order of actions first and
allocate resources when time comes to enable the action rule.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
NIC DMA memory regions API allows to establish mapping of DMA addresses
used by NIC to host IOVA understood by the host when IOMMU is absent
and NIC cannot address entire host IOVA space because of too small
DMA mask.
The API does not allow to address entire host IOVA space, but allows
arbitrary regions of the space really used for the NIC DMA.
A DMA region needs to be mapped in order to perform MCDI initialization.
Since the NIC has not been probed at that point, its configuration cannot
be accessed and there an UNKNOWN mapping type is assumed.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Mempool registration code had a wrong assumption that it is always
dealing with packet mempools and always called rte_pktmbuf_priv_flags(),
which returned a random value for different types of mempools.
In particular, it could consider MPRQ mempools as having externally
pinned buffers, which is wrong.
Packet mempools cannot be reliably recognized, but it is sufficient to
check that the mempool is not a packet one, so it cannot have externally
pinned buffers.
Compare mempool private data size to that of packet mempools to check.
Fixes: 690b2a88c2 ("common/mlx5: add mempool registration facilities")
Fixes: fec28ca0e3 ("net/mlx5: support mempool registration")
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Inside the MR control structure there is a pointer to the common device.
This pointer enables access to the global cache as well as hardware
objects that may be required in case a new MR needs to be created.
The purpose of adding this pointer into the MR control structure was to
avoid its transfer as a parameter to all the functions of searching MR
in the caches.
However, adding it to this structure increased the Rx and Tx data-path
structures, all the fields that followed it were slightly moved away
which caused to a reduction in performance.
This patch removes the pointer from the structure. It can be accessed
through the "dev_gen_ptr" existing field using the "container_of"
operator.
Fixes: 334ed198ab ("common/mlx5: remove redundant parameter in MR search")
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
This commit fixes overrun of ring configuration
due to insufficient check.
Fixes: 4badfb0205 ("common/qat: fix queue pairs number")
Cc: stable@dpdk.org
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Ciara Power <ciara.power@intel.com>
Fix kasumi input len calculation to consider encr_offset.
Fixes: da39e3eccd ("common/cpt: support KASUMI")
Cc: stable@dpdk.org
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Reported by clang 13.
This patch removes the us variable from the qat_pf2vf_exch_msg function
within the PF to VF section of the QAT driver as it is an unused but set
variable.
Bugzilla ID: 881
Fixes: b17d16fb47 ("common/qat: add PF to VF communication")
Reported-by: Liang Longfeng <longfengx.liang@intel.com>
Signed-off-by: Conor Walsh <conor.walsh@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
The memory allocated for temporarily keeping DPTR need to be freed after
operation.
Also, dptr need to be aligned to 8B.
Fixes: 71213a8b77 ("common/cnxk: support CPT CTX write through microcode op")
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Reviewed-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Reviewed-by: Tejasree Kondoj <ktejasree@marvell.com>
The pointer passed to the rq_ctx and sq_ctx functions was the address
of qctx. Instead of that qctx should be passed. This patch fixes this.
This patch also resolves warning observed with gcc 12 compiler.
log:
../drivers/common/cnxk/cnxk_telemetry.h:12:38:
warning: array subscript
‘struct nix_cn10k_sq_ctx_s[0]’ is partly outside array bounds of
‘volatile void[8]’ [-Warray-bounds]
Bugzilla ID: 853
Fixes: af75aac789 ("common/cnxk: support telemetry for NIX")
Cc: stable@dpdk.org
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Reviewed-by: Gowrishankar Muthukrishnan <gmuthukrishn@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
The structure of the striding RQ(MPRQ) buffer includes an array size
defined by the RTE_PKTMBUF_HEADROOM macro added in [1].
When RTE_PKTMBUF_HEADROOM is set to 0 in the compilation config file
the compilation with debug type failed:
"In file included from ../drivers/common/mlx5/mlx5_common.h:25,
from ../drivers/common/mlx5/linux/mlx5_nl.h:12,
from ../drivers/common/mlx5/linux/mlx5_nl.c:22:
../drivers/common/mlx5/mlx5_common_mr.h:96:10: error: ISO C forbids
zero-size array 'pad' [-Werror=pedantic]"
Actually, the array for the first stride headroom is not needed:
Each stride in the striding RQ buffer includes the headroom of the next
stride, so the headroom of the first stride should be allocated before
the starting point of the buffer posted to the HW(HW buffer).
The striding RQ buffer is used as an attached buffer to mbuf and have
shared information per stride.
The LRO support moved all the strides shared information to the top of
the buffer before the first stride headroom but didn't remove the old
memory of this headroom from the buffer.
Remove the old headroom memory from the striding RQ buffer.
[1] commit 7d6bf6b866 ("net/mlx5: add Multi-Packet Rx support")
Fixes: 3a22f3877c ("net/mlx5: replace external mbuf shared memory")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Registration of packet mempools with RTE_PKTMBUF_POOL_PINNED_EXT_MEM
was performed incorrectly: after population of such mempool chunks
only contain memory for rte_mbuf structures, while pointers to actual
external memory are not yet filled. MR LKeys could not be obtained
for external memory addresses of such mempools. Rx datapath assumes
all used mempools are registered and does not fallback to dynamic
MR creation in such case, so no packets could be received.
Skip registration of extmem pools on population because it is useless.
If used for Rx, they are registered at port start.
During registration, recognize such pools, inspect their mbufs
and recover the pages they reside in.
While MRs for these pages may already be created by rte_dev_dma_map(),
they are not reused to avoid synchronization on Rx datapath
in case these MRs are changed in the database.
Fixes: 690b2a88c2 ("common/mlx5: add mempool registration facilities")
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Reviewed-by: Matan Azrad <matan@nvidia.com>
Reviewed-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
The mlx5 PMD uses the kernel mlx5 driver to map physical memory to the
HW.
Using the Verbs API ibv_reg_mr, a mkey can be created for that.
In this case, the mkey is signed on the user ID of the kernel driver.
Using the DevX API, a mkey also can be created, but it should point an
umem object (represents the specific buffer mapping) created by the
kernel. In this case, the mkey is signed on the user ID of the process
DevX context.
In FW DevX control commands which get mkey as a parameter, there is
a security check on the user ID and Verbs mkeys are rejected.
Unfortunately, also when using DevX mkey, there is an error in the FW
command on umem validation because the umem is not designed to be used
for any mkey parameters.
As a workaround to the kernel driver/FW issue, it is needed to use a
wrapped MR, which is an indirect mkey(created by the DevX API) pointing to
direct mkey created by the kernel for any DevX command uses an MR.
Add an API to create and destroy this wrapped MR.
Fixes: 5382d28c21 ("net/mlx5: accelerate DV flow counter transactions")
Fixes: 9d39e57f21 ("vdpa/mlx5: support live migration")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Signed-off-by: Matan Azrad <matan@nvidia.com>
Add support for rdma-core API to register IOVA MR.
The API gets the process VA, size, and IOVA and returns a memory region
with space pointed by a specific IOVA.
So any access in this MR should come with an address that is relative to
the IOVA specified in the API.
Fixes: cc07a42da2 ("vdpa/mlx5: prepare memory regions")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Signed-off-by: Matan Azrad <matan@nvidia.com>
The DPAA DMA driver is an implementation of the dmadev APIs,
that provide means to initiate a DMA transaction from CPU.
The initiated DMA is performed without CPU being involved
in the actual DMA transaction. This is achieved via using
the QDMA controller of DPAA SoC.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Affects the outermost header, taking prior action DECAP into
account. Takes care to also update IPv4 checksum accordingly.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
When an action gets added to an action set, a special helper is
used to handle its arguments. There are actions which have no
arguments, and the corresponding helpers are duplicates in
fact. Use a unified no-op helper instead of them.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
1) Invalid counter ID is always set by default.
Do not set it again when adding the action.
2) Counter ID validity check is missing in the
action set allocation helper. Introduce it.
Fixes: 238306cf9a ("common/sfc_efx/base: support counter in action set")
Cc: stable@dpdk.org
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
1) Invalid encap. header ID is always set by default.
Do not set it again when adding the action.
2) Encap. header ID validity check is missing in the
action set allocation helper. Introduce it.
Fixes: 3907defa5b ("common/sfc_efx/base: support adding encap action to a set")
Cc: stable@dpdk.org
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
The number of WQEBBs was provided to QP create, and QP size was calculated
by multiplying the number of WQEBBs by 64, which is the send WQE size.
When creating RQ in the QP (i.e., vdpa driver), the queue size was bigger
because the receive WQE size is 16.
Provide queue size to QP create instead of the number of WQEBBs.
Fixes: f9213ab12c ("common/mlx5: share DevX queue pair operations")
Signed-off-by: Raja Zidane <rzidane@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
The DevX interface for QP creation expects the number of WQEBBs.
Wrongly, the number of descriptors was provided to the QP creation.
In addition, the QP size must be a power of 2 what was not guaranteed.
Provide the number of WQEBBs to the QP creation API.
Round up the SQ size to a power of 2.
Rename (sq/rq)_size to num_of_(send/receive)_wqes.
Fixes: 6152534e21 ("crypto/mlx5: support queue pairs operations")
Cc: stable@dpdk.org
Signed-off-by: Raja Zidane <rzidane@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Tal Shnaiderman <talshn@nvidia.com>
The HW QP/SQ/RQ/CQ queue sizes may be bigger than 64KB.
The width of the variable handled the queue size is 16 bits
which cannot contain the maximum queue size.
Replace the size type to be uint32_t.
Fixes: 9dab4d62b4 ("common/mlx5: share DevX CQ creation")
Fixes: 38f537635c ("common/mlx5: share DevX SQ creation")
Fixes: f9213ab12c ("common/mlx5: share DevX queue pair operations")
Cc: stable@dpdk.org
Signed-off-by: Raja Zidane <rzidane@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
The QP extension valid bit was not set in the QP creation for MMO
configuration.
That caused the QP not to be connected to the GGA MMO engines,
and any MMO WQE job got CQE with an error.
Set the QP ext bit when MMO is configured.
Fixes: ddda000618 ("common/mlx5: add MMO configuration for DevX queue pair")
Signed-off-by: Raja Zidane <rzidane@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
0x20 reserved bytes were missed in the HCA cap PRM structure before the
newly added fields for MMO QP capabilities.
That caused reading MMO QP caps incorrectly.
Add the reserved fields in the HCA cap structure.
Fixes: cbc4c13a25 ("common/mlx5: update MMO HCA capabilities")
Signed-off-by: Raja Zidane <rzidane@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Add base support as ROC(Rest of Chip) API which will be used by PMD
dmadev driver.
This patch adds routines to init, fini, configure the DPI DMA device
found in Marvell's CN9k or CN10k SoC families.
Signed-off-by: Radha Mohan Chintakuntla <radhac@marvell.com>
The rdma-core library can map doorbell register in two ways, depending
on the environment variable "MLX5_SHUT_UP_BF":
- as regular cached memory, the variable is either missing or set to
zero. This type of mapping may cause the significant doorbell
register writing latency and requires an explicit memory write
barrier to mitigate this issue and prevent write combining.
- as non-cached memory, the variable is present and set to not "0"
value. This type of mapping may cause performance impact under
heavy loading conditions but the explicit write memory barrier is
not required and it may improve core performance.
The UAR creation function maps a doorbell in one of the above ways
according to the system. In run time, it always adds an explicit memory
barrier after writing to.
In cases where the doorbell was mapped as non-cached memory, the
explicit memory barrier is unnecessary and may impair performance.
The commit [1] solved this problem for a Tx queue. In run time, it
checks the mapping type and provides the memory barrier after writing to
a Tx doorbell register if it is needed. The mapping type is extracted
directly from the uar_mmap_offset field in the queue properties.
This patch shares this code between the drivers and extends the above
solution for each of them.
[1] commit 8409a28573
("net/mlx5: control transmit doorbell register mapping")
Fixes: f8c97babc9 ("compress/mlx5: add data-path functions")
Fixes: 8e196c08ab ("crypto/mlx5: support enqueue/dequeue operations")
Fixes: 4d4e245ad6 ("regex/mlx5: support enqueue")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Reviewed-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
UAR mapping type can be affected by the devarg tx_db_nc, which can cause
setting the environment variable MLX5_SHUT_UP_BF.
So, the MLX5_SHUT_UP_BF value and the UAR mapping parameter affect the
UAR cache mode.
Wrongly, the devarg was considered for the MLX5_SHUT_UP_BF but not for
the UAR mapping parameter in all the drivers except the net.
Take the tx_db_nc devarg into account for all the drivers.
Fixes: ca1418ce39 ("common/mlx5: share device context object")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Reviewed-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Depending on kernel capabilities and rdma-core version the mapping of
UAR (User Access Region) of desired memory caching type (non-cached or
write combining) might fail. The PMD implements the flexible strategy
of UAR mapping, alternating the type of caching to succeed.
During this process the failure diagnostics messages are emitted.
These messages are merely diagnostics ones and the logging level should
be adjusted to DEBUG.
Fixes: 9cc0e99c81 ("common/mlx5: share UAR allocation routine")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Reviewed-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
The User Access Region (UAR) provides access to the hardware resources
like Doorbell Register from userspace.
It means the resources should be mapped by the kernel to some virtual
address range. There two types of memory mapping are supported by mlx5
kernel driver:
MLX5DV_UAR_ALLOC_TYPE_NC - non-cached, all writes promoted directly to
hardware.
MLX5DV_UAR_ALLOC_TYPE_BF - "BlueFlame", all writes might be cached by
CPU, and will be flushed to hardware
explicitly with memory barriers.
The supported mapping types depend on the platform (x86/ARM/etc), kernel
version, driver version, virtualization environment (hypervisor), etc.
In UAR allocation, if the system supports the allocation with non-cached
mapping, the first attempt is performed with MLX5DV_UAR_ALLOC_TYPE_NC.
Then, if this fails, the next attempt is done with
MLX5DV_UAR_ALLOC_TYPE_BF.
However, the function adds a condition for the case where the first
attempt was performed with MLX5DV_UAR_ALLOC_TYPE_BF, a condition that is
unattainable since the first attempt was always performed with
MLX5DV_UAR_ALLOC_TYPE_NC.
Remove the unreachable code.
Fixes: 9cc0e99c81 ("common/mlx5: share UAR allocation routine")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Reviewed-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
In the multi-process mechanism, there are things that the secondary
process does not perform itself but asks the primary process to perform
for it.
There is a special API for communication between the processes that
receives parameters necessary for the specific action required as well
as a special structure called mp_id that contains the port number of the
processes through which the initial process finds the relevant ETH
device for the processes.
One of the operations performed through this mechanism is the creation
of a memory region, where the secondary process sends the virtual
address as a parameter and the mp_id structure with the port number
inside it.
However, once the memory area management is shared between the drivers
and either port number or ETH device is no longer relevant to them, it
seems unnecessary to continue communicating between the processes
through the mp_id variable.
In this patch we will remove the use of the above structure for all MR
management, and add to the specific parameter of operations a pointer to
the common device that contains everything needed to create/register MR.
Fixes: 9f1d636f3e ("common/mlx5: share MR management")
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Reviewed-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Reviewed-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Memory region management has recently been shared between drivers,
including the search for caches in the data plane.
The initial search in the local linear cache of the queue, usually
yields a result and one should not continue searching in the next level
caches.
The function that searches in the local cache gets the pointer to a
device as a parameter, that is not necessary for its operation
but for subsequent searches (which, as mentioned, usually do not
happen).
Transferring the device to a function and maintaining it, takes some
time and causes some impact on performance.
Add the pointer to the device as a field of the mr_ctrl structure. The
field will be updated during control path and will be used only when
needed in the search.
Fixes: fc59a1ec55 ("common/mlx5: share MR mempool registration")
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Reviewed-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Reviewed-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Memory region management has recently been shared between drivers,
including the search for caches in the data plane.
The initial search in the local linear cache of the queue,
usually yields a result and one should not continue searching
in the next layer caches.
Prior to cache sharing the local linear cache lookup function
was defined with "static inline" attributes,
those were missed in routine commoditizing step
and this caused performance degradation.
Set the common function as static inline.
Fixes: fc59a1ec55 ("common/mlx5: share MR mempool registration")
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Reviewed-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Reviewed-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
efsys.h belongs to common/sfc_efx and common driver debug
toggle should be used instead of net/sfc toggle.
Fixes: 5e111ed879 ("net/sfc: introduce common driver library")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
For the Ethernet RQs, if there all receiving descriptors are
exhausted, the packets being received will be dropped. This behavior
prevents slow or malicious software entities at the host from
affecting the network. While for hairpin cases, even if there is no
software involved during the packet forwarding from Rx to Tx side,
some hiccup in the hardware or back pressure from Tx side may still
cause the descriptors to be exhausted. In certain scenarios it may be
preferred to configure the device to avoid such packet drops,
assuming the posting of descriptors will resume shortly.
To support this, a new devarg "delay_drop" is introduced. By default,
the delay drop is enabled for hairpin Rx queues and disabled for
standard Rx queues. This value is used as a bit mask:
- bit 0: enablement of standard Rx queue
- bit 1: enablement of hairpin Rx queue
And this attribute will be applied to all Rx queues of a device.
The "rq_delay_drop" capability in the HCA_CAP is checked before
creating any queue. If the hardware capabilities do not support
this delay drop, all the Rx queues will still be created without
this attribute, and the devarg setting will be ignored even if it
is specified explicitly. A warning log is used to notify the
application when this occurs.
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
The hardware Receive Memory Pool (RMP) object holds the destination for
incoming packets/messages that are routed to the RMP through RQs. RMP
enables sharing of memory across multiple Receive Queues. Multiple
Receive Queues can be attached to the same RMP and consume memory
from that shared poll. When using RMPs, completions are reported to the
CQ pointed to by the RQ, user index that set in RQ creation time is
carried to completion entry.
This patch enables RMP based RQ, RMP is created when mlx5_devx_rq.rmp is
set.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
The hardware Receive Memory Pool (RMP) object holds the destination for
incoming packets/messages that are routed to the RMP through RQs. RMP
enables sharing of memory across multiple Receive Queues. Multiple
Receive Queues can be attached to the same RMP and consume memory
from that shared poll. When using RMPs, completions are reported to the
CQ pointed to by the RQ, and this Completion Queue can be shared as
well.
This patch adds DevX supports of PRM RMP object.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
On ConnectX devices the completion entry provides the dedicated 24-bit
field, that is filled up with some static value assigned at the
Receiving Queue creation moment. This patch declares this field. This is
a preparation step for supporting shared RQs and the field is supposed
to provide actual port index while handling the shared receiving
queue(s).
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
MLX5 PARSE_GRAPH_NODE is the main data structure used by the Flex
Parser when a new parsing protocol is defined. While software
creates PARSE_GRAPH_NODE object for a new protocol, it must
verify that configuration parameters it uses comply with
hardware limits.
The patch queries hardware PARSE_GRAPH_NODE capabilities and
stores ones in PMD internal configuration structure:
- query capabilities from parse_graph_node attribute page
- query max_num_prog_sample_field capability from HCA page 2
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Reviewed-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
There is the common part of code querying the HCA attributes
from the device, and this part can be commoditized as
dedicated routine.
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
This patch replaces the mixed QAT symmetric and asymmetric
support implementation by separate files with shared or
individual implementation for specific QAT generation.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Signed-off-by: Kai Ji <kai.ji@intel.com>
Acked-by: Ciara Power <ciara.power@intel.com>
This patch unifies the QAT symmetric and asymmetric device
private data structures and functions.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Signed-off-by: Kai Ji <kai.ji@intel.com>
Acked-by: Ciara Power <ciara.power@intel.com>
This patch replaces the mixed QAT compression support
implementation by separate files with shared or individual
implementation for specific QAT generation.
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Signed-off-by: Kai Ji <kai.ji@intel.com>
Acked-by: Ciara Power <ciara.power@intel.com>
This patch adds the compression data structure and function
prototypes for different QAT generations.
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Signed-off-by: Kai Ji <kai.ji@intel.com>
Acked-by: Ciara Power <ciara.power@intel.com>
This patch replaces the mixed QAT queue pair configuration
implementation by separate files with shared or individual
implementation for specific QAT generation.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Signed-off-by: Kai Ji <kai.ji@intel.com>
Signed-off-by: Przemyslaw Zegan <przemyslawx.zegan@intel.com>
Acked-by: Ciara Power <ciara.power@intel.com>
This patch adds the queue pair data structure and function
prototypes for different QAT generations.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Ciara Power <ciara.power@intel.com>
This patch replaces the mixed QAT device configuration
implementation by separate files with shared or
individual implementation for specific QAT generation.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Signed-off-by: Kai Ji <kai.ji@intel.com>
Acked-by: Ciara Power <ciara.power@intel.com>
This patch adds the data structure and function prototypes for
different QAT generations.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Signed-off-by: Kai Ji <kai.ji@intel.com>
Acked-by: Ciara Power <ciara.power@intel.com>
Use appropriate ZUC constants based on key length and mac length
Fixes: a90db80d7d ("common/cnxk: set key length for PDCP algos")
Signed-off-by: Vidya Sagar Velumuri <vvelumuri@marvell.com>
Add support for mlx5 crypto pmd on Windows OS.
Add changes to release note and PMD guide.
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Add needed DV enums used by the crypto PMD and missing
for Windows OS.
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Handling the case where number of MSIX interrupts are greater
than default value i.e. PLT_MAX_RXTX_INTR_VEC_ID. On PCI probe
device is queried for supported MSIX interrupts, and respective
interrupt resources are reallocated with this value. Same MSIX
count should be used while registering new interrupt vectors.
Fixes: 8cb5d08db9 ("interrupts: extend event list")
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Fix a few typos.
Fixes: fa8f86a14e ("common/cnxk: add build infrastructre and HW definition")
Fixes: f6d567b03d ("common/cnxk: support NIX IRQ")
Fixes: 5e076b609f ("common/cnxk: add SE set key for crypto")
Cc: stable@dpdk.org
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
To support lower pps in packet mode we are changing adjust value,
same needs to be consider for burst size calculations.
When both peak and committed rates requested, then peak rate should
be larger than committed rate.
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Ingress meter rate is calculated based on hardcoded
policer time unit. Patch adds mbox interface to
retrieve configured policer time unit.
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Added API to toggle drop_re flag after nix_lf_alloc() so that it
can be used to toggle it runtime.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Enable TM topology to listen on backpressure received when
Rx pause frame is enabled. Only one TM node in Tl3/TL2 per
channel can listen on backpressure on that channel.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Support flow control enable/disable on LBK VF's as HW
supports backpressure on LBK links.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add support for registering callback for ROC NPA init.
Signed-off-by: Volodymyr Fialko <vfialko@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Remove debug log inside of mlx5_list_init to avoid flooding debug
messages when creating hash list with large actual size.
Fixes: 9c373c524b ("common/mlx5: move list utility from net driver")
Cc: stable@dpdk.org
Signed-off-by: Sean Zhang <xiazhang@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
sysfs entry "phys_switch_id" holds each PCIe device'
guid.
The devices which reside in the same physical NIC should
have the same guid.
Signed-off-by: Rongwei Liu <rongweil@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
This patch modifies the SET_REGEXP_PARAMS DevX command as follows:
Remove DB setup DevX command. The command is no longer needed
in DPDK, it will always be invoked by the regex-daemon.
Add new DevX command, for programming ROF rules for a specific engine.
The command takes as an input an mkey of the ROF.
It also introduces a new field_select bit.
Signed-off-by: Ady Agbarih <adypodoman@gmail.com>
Acked-by: Ori Kam <orika@nvidia.com>
Update PRM hca capabilities definitions as follows:
regexp_version field added - specifies whether BF2 or BF3
regexp field removed
regexp_params field moved
regexp_log_crspace_size field removed
regexp_mmo added - specifies if using regex mmo wqe is supported
Allow regex only if both regexp_params and regexp_mmo are set,
instead of checking regexp_mmo only.
Check version through the new capability field regexp_version instead
of reading crspace register.
Signed-off-by: Ady Agbarih <adypodoman@gmail.com>
Acked-by: Ori Kam <orika@nvidia.com>
Dynamically allocating the efds and elist array of intr_handle
structure, based on size provided by user. Eg size can be
MSIX interrupts supported by a PCI device.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Tested-by: Raslan Darawsheh <rasland@nvidia.com>
Removing direct access to interrupt handle structure fields,
rather use respective get set APIs for the same.
Making changes to all the drivers access the interrupt handle fields.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Tested-by: Raslan Darawsheh <rasland@nvidia.com>
Use CPT LF queue depth as power of 2 to aid in masked checks for pending
queue.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add 'RTE_ETH' namespace to all enums & macros in a backward compatible
way. The macros for backward compatibility can be removed in next LTS.
Also updated some struct names to have 'rte_eth' prefix.
All internal components switched to using new names.
Syntax fixed on lines that this patch touches.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
This patch adds ROC API to support flow port ID action type.
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Added a new function mlx5_devx_cmd_query_lag() to query LAG
property from firmware including state/affinity/mode etc.
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Signed-off-by: Rongwei Liu <rongweil@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Introduce netlink API to get RDMA port state.
Port state is retrieved based on RDMA device name and port index.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
CNF10KA does not differ it terms of RVU resources from
CN10KA platform hence add it to list of devices respective
drivers support.
Otherwise devices on CNF10KA are not probed even though
compatible drivers exist.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Expand the use of mempool registration to MR management for other
drivers.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Since MR management has moved to the common area, there is no longer a
need for the DMA map and unmap function for each driver.
This patch share those functions. For most drivers it supports these
operations for the first time.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Add global shared MR cache as a field of common device structure.
Move MR management to use this global cache for all drivers.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Add function to search in local liniar cache and use it in the drivers
instead of their functions.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Add function for global shared MR cache structure initialization.
This function include:
- btree initialization.
- set callbacks for reg and dereg MR.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Add function for MR control structure initialization.
This function include:
- btree initialization.
- dev_gen_ptr initialization.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Add HCA attributes structure as a field of device config structure.
It query in common probing, and updates the timestamp format fields.
Each driver use HCA attributes from common device config structure,
instead of query it for itself.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Create shared Protection Domain in common area and add it and its PDN as
fields of common device structure.
Use this Protection Domain in all drivers and remove the PD and PDN
fields from their private structure.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Add option to get IB device after disabling RoCE. It is relevant if
there is vDPA class in device arguments list.
Use common device context in vDPA driver and remove the ctx field from
its private structure.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Create shared context device in common area and add it as a field of
common device.
Use this context device in all drivers and remove the ctx field from
their private structure.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Add device configure structure and function to parse user device
arguments into it.
Move parsing and management of relevant device arguments to common.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Create MACRO definitions file in the common driver as preparation for MR
and basic probe sharing.
Move relevant definitions from the net driver to the above file.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Create common probing structure that includes, for now, basic probing
information detected by the common driver and share it with all the
internal drivers.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
This patch removes the MCAM preallocation scheme. The free
entry cache is removed and for every flow created, an MCAM
allocation request is made to the kernel. Each priority level
has a list of MCAM entries. For every flow rule added, the
MCAM entry obtained from kernel is checked if it is at the
correct user specified priority. If not, the existing rules
are moved across MCAM entries so that the user specified
priority is maintained.
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Reviewed-by: Kiran Kumar K <kirankumark@marvell.com>
Implement RoC API to reset stats per bandwidth profile
or per NIXLF.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
CN10K platform provides statistics per bandwidth profile and
per nixlf. Implement RoC API to read stats for given bandwidth
profile.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
CN10K platform supports different stats for HW bandwidth profiles.
Implement RoC API to get index for given stats type.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
To maintain chain of bandwidth profiles, they needs to be
connected. Implement RoC API to connect two bandwidth profiles
at different levels.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
For initial coloring of input packet, CN10K platform maintains
precolor table for VLAN, DSCP and Generic. Implement RoC
interface to setup pre color table.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Implement RoC API to dump bandwidth profile on CN10K
platform.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Implement RoC API to enable or disable HW bandwidth profiles
on CN10K platform.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Implement RoC API to configure HW bandwidth profile for
CN10K platform.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Implement RoC interface to free HW bandwidth profiles on
CN10K platform.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Implement RoC API to allocate HW resources i.e. bandwidth
profiles for policer processing on CN10K platform.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Implement interface to get available profile count for given
NIXLF.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
CN10K platform supports policer up to 3 level of hierarchy.
Implement RoC API to get corresponding index for given level.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
To support ingress policer on CN10K, MBOX interfaces and HW
definitions updated.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Jerin Jacob <jerinj@marvell.com>
In order to differentiate between privileged and unprivileged MAE clients,
add a separate boolean flag to represent a NIC's MAE privilege level.
Allow initializing unprivileged MAE clients by avoiding calls to functions
that can only be called by the admin NIC.
Signed-off-by: Viacheslav Galaktionov <viacheslav.galaktionov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Since AARCH32 extension is not implemented on octeontx2 family, only
enable build for 64bit.
Due to Linux kernel AF(Admin Function) driver dependency, only enable
build for 64-bit Linux.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Since AARCH32 extension is not implemented on octeontx family, only
enable build for 64bit.
Due to Linux kernel AF(Admin function) driver dependency, only enable
build for 64-bit Linux.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Move rte_eth_dev, rte_eth_dev_data, rte_eth_rxtx_callback and related
data into private header (ethdev_driver.h).
Few minor changes to keep DPDK building after that.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Feifei Wang <feifei.wang2@arm.com>
