Added option to configure number of queue pair descriptors via command
line (--desc-nb NUMBER_OF_DESC).
When the crypto processing takes longer durations, small queue pair size
would result in cryptodev enqueue failures. Larger queue pair size would
allow more packets to stay in flight simultaneously and reduce enqueue
failures.
Signed-off-by: Volodymyr Fialko <vfialko@marvell.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Added support for ACC101 as a derivative of ACC100.
Integrated in unified driver and reusing existing code when possible.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The PIE code and other applications can benefit from having a
fast way to get a random floating point value. This new function
is equivalent to drand() in the standard library.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Add support for changing miscellaneous CPRI settings.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add support for enabling or disablig TX for SERDES
configured in CPRI mode.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jakub Palider <jpalider@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add support for switching from ethernet (eCPRI) to CPRI mode.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jakub Palider <jpalider@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
AFU (Acceleration Function Unit) is part of FPGA and enumerated
by ifpga driver.
This driver implements common AFU device interfaces and exposes
them to application as standard raw device APIs.
Normally application can operate specified AFU as below,
1. call rte_rawdev_pmd_get_named_dev() to find AFU device.
2. call rte_rawdev_configure() to initialize AFU device.
3. call rte_rawdev_selftest() to test AFU device.
Signed-off-by: Wei Huang <wei.huang@intel.com>
Acked-by: Tianfei Zhang <tianfei.zhang@intel.com>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
A new event RTE_ETH_EVENT_RX_AVAIL_THRESH should be generated by HW
when number of available descriptors in Rx queue goes below the
threshold.
The threshold is defined as a percentage of an Rx queue size with valid
values from 0 to 99 (inclusive). Zero (default) value disables it.
There is no capability reporting for the feature. Application should
simply try to set required threshold value and handle result.
Add testpmd commands to control the threshold:
set port <port_id> rxq <rxq_id> avail_thresh <avail_thresh_num>
Signed-off-by: Spike Du <spiked@nvidia.com>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
- New firmware version for MPU (Mbuf Prefetch Unit)
- Remove device-level global operations
- Remove ark_mpu_reset_stats function
Signed-off-by: Ed Czeck <ed.czeck@atomicrules.com>
The PMD attempts to enable the LLQ (Low Latency Queue) whenever it's
possible. The LLQ requires the user to enable the Write Combining for
the supported igb_uio/vfio-pci modules.
The vfio-pci module officially doesn't support the WC. Moreover, in some
Linux distributions, it can be built into the kernel, so any
modifications to the vfio-pci module require a full rebuild of the
kernel. This can make the configuration process much harder and for some
users, that are not interested in the great network performance for
their setups, it may be redundant. These users requested to be able to
turn off LLQ to avoid the hassle of such a setup.
It's generally not recommended to disable the LLQ, as it won't result in
the performance improvement and on the 6th generation AWS instances the
lack of LLQ can have a huge negative impact on hardware performance.
The device argument which controls the LLQ is called 'enable_llq` and by
default, it's set to 1 (which means that the LLQ is enabled). Setting
it to 0 disables the LLQ.
This commit also adds the explicit initialization of the devarg for the
'use_large_llq_hdr'. The PMD_REGISTER_PARAM_STRING() call for the ENA
was updated with all the available devargs (including
ENA_DEVARG_MISS_TXC_TO, which wasn't added previously).
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Dawid Gorecki <dgr@semihalf.com>
Reviewed-by: Shai Brandes <shaibran@amazon.com>
Reviewed-by: Amit Bernstein <amitbern@amazon.com>
Add support for RTE_ETH_TX_OFFLOAD_MBUF_FAST_FREE offload. It can be
enabled if all the mbufs for a given queue belong to the same mempool
and their reference count is equal to 1.
Signed-off-by: Dawid Gorecki <dgr@semihalf.com>
Reviewed-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Shai Brandes <shaibran@amazon.com>
Reviewed-by: Amit Bernstein <amitbern@amazon.com>
l3fwd-acl contains duplicate functions to l3fwd.
For this reason we merge l3fwd-acl code into l3fwd
with '--lookup acl' cmdline option to run ACL.
Signed-off-by: Sean Morrissey <sean.morrissey@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Re-use vector processing stubs in ixgbe PMD defined for PPC for RISC-V.
This enables ixgbe PMD usage in scalar mode on this architecture.
The ixgbe PMD driver was validated with Intel X520-DA2 NIC and the
test-pmd application. Packet transfer checked using all UIO drivers
available for non-IOMMU platforms: uio_pci_generic, vfio-pci noiommu and
igb_uio.
Sponsored-by: Frank Zhao <frank.zhao@starfivetech.com>
Sponsored-by: Sam Grove <sam.grove@sifive.com>
Signed-off-by: Stanislaw Kardach <kda@semihalf.com>
Add all necessary elements for DPDK to compile and run EAL on SiFive
Freedom U740 SoC which is based on SiFive U74-MC (ISA: rv64imafdc)
core complex.
This includes:
- EAL library implementation for rv64imafdc ISA.
- meson build structure for 'riscv' architecture. RTE_ARCH_RISCV define
is added for architecture identification.
- xmm_t structure operation stubs as there is no vector support in the
U74 core.
Compilation was tested on Ubuntu and Arch Linux using riscv64 toolchain.
Clang compilation currently not supported due to issues with missing
relocation relaxation.
Two rte_rdtsc() schemes are provided: stable low-resolution using rdtime
(default) and unstable high-resolution using rdcycle. User can override
the scheme by defining RTE_RISCV_RDTSC_USE_HPM=1 during compile time of
both DPDK and the application. The reasoning for this is as follows.
The RISC-V ISA mandates that clock read by rdtime has to be of constant
period and synchronized between all hardware threads within 1 tick
(chapter 10.1 in version 20191213 of RISC-V spec).
However this clock may not be of high-enough frequency for dataplane
uses. I.e. on HiFive Unmatched (FU740) it is 1MHz.
There is a high-resolution alternative in form of rdcycle which is
clocked at the core clock frequency. The drawbacks are that it may be
disabled during sleep (WFI), its frequency might change due to DVFS and
it is core-local and therefore cannot be used as a wall-clock. It can
however be used for micro-benchmarking user applications, similarly to
Aarch64's PMCCNTR PMU counter.
The platform is currently marked as linux-only because rte_cycles
implementation uses the timebase-frequency device-tree node read through
the proc file system. Such approach was chosen because Linux kernel
depends on the presence of this device-tree node.
The i40e PMD driver is disabled on RISC-V as the rv64gc ISA has no vector
operations.
The compilation of following modules has been disabled by this commit
and will be re-enabled in later commits as fixes are introduced:
net/ixgbe, net/memif, net/tap, example/l3fwd.
Sponsored-by: Frank Zhao <frank.zhao@starfivetech.com>
Sponsored-by: Sam Grove <sam.grove@sifive.com>
Signed-off-by: Michal Mazurek <maz@semihalf.com>
Signed-off-by: Stanislaw Kardach <kda@semihalf.com>
Move the "source_org" page to after overview, where it fits
better to explain the source-code layout of DPDK, before getting
into details of specific libraries such as EAL.
Also removes the older titles from the 3 documents which still had them.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Small improvements to the documentation based on Sphinx HTML doc output.
Fixes: 14b8f0bbe5 ("doc: add BPF library guide")
Fixes: b901d92836 ("bpf: support packet data load instructions")
Cc: stable@dpdk.org
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Konstantin Ananyev <konstantin.v.ananyev@yandex.ru>
A sequence lock (seqlock) is a synchronization primitive which allows
for data-race free, low-overhead, high-frequency reads, suitable for
data structures shared across many cores and which are updated
relatively infrequently.
A seqlock permits multiple parallel readers. A spinlock is used to
serialize writers. In cases where there is only a single writer, or
writer-writer synchronization is done by some external means, the
"raw" sequence counter type (and accompanying rte_seqcount_*()
functions) may be used instead.
To avoid resource reclamation and other issues, the data protected by
a seqlock is best off being self-contained (i.e., no pointers [except
to constant data]).
One way to think about seqlocks is that they provide means to perform
atomic operations on data objects larger than what the native atomic
machine instructions allow for.
DPDK seqlocks (and the underlying sequence counters) are not
preemption safe on the writer side. A thread preemption affects
performance, not correctness.
A seqlock contains a sequence number, which can be thought of as the
generation of the data it protects.
A reader will
1. Load the sequence number (sn).
2. Load, in arbitrary order, the seqlock-protected data.
3. Load the sn again.
4. Check if the first and second sn are equal, and even numbered.
If they are not, discard the loaded data, and restart from 1.
The first three steps need to be ordered using suitable memory fences.
A writer will
1. Take the spinlock, to serialize writer access.
2. Load the sn.
3. Store the original sn + 1 as the new sn.
4. Perform load and stores to the seqlock-protected data.
5. Store the original sn + 2 as the new sn.
6. Release the spinlock.
Proper memory fencing is required to make sure the first sn store, the
data stores, and the second sn store appear to the reader in the
mentioned order.
The sn loads and stores must be atomic, but the data loads and stores
need not be.
The original seqlock design and implementation was done by Stephen
Hemminger. This is an independent implementation, using C11 atomics.
For more information on seqlocks, see
https://en.wikipedia.org/wiki/Seqlock
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
Reviewed-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Telemetry commands are now registered through the dmadev library
for the gathering of DSA stats. The corresponding callback
functions for listing dmadevs and providing info and stats for a
specific dmadev are implemented in the dmadev library.
An example usage can be seen below:
Connecting to /var/run/dpdk/rte/dpdk_telemetry.v2
{"version": "DPDK 22.03.0-rc2", "pid": 2956551, "max_output_len": 16384}
Connected to application: "dpdk-dma"
--> /
{"/": ["/", "/dmadev/info", "/dmadev/list", "/dmadev/stats", ...]}
--> /dmadev/list
{"/dmadev/list": [0, 1]}
--> /dmadev/info,0
{"/dmadev/info": {"name": "0000:00:01.0", "nb_vchans": 1, "numa_node": 0,
"max_vchans": 1, "max_desc": 4096, "min_desc": 32, "max_sges": 0,
"capabilities": {"mem2mem": 1, "mem2dev": 0, "dev2mem": 0, ...}}}
--> /dmadev/stats,0,0
{"/dmadev/stats": {"submitted": 0, "completed": 0, "errors": 0}}
Signed-off-by: Sean Morrissey <sean.morrissey@intel.com>
Reviewed-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
Tested-by: Sunil Pai G <sunil.pai.g@intel.com>
Tested-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Chengwen Feng <fengchengwen@huawei.com>
Added I226 Series device ID in igc driver and updated igc guide
document for new devices.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Signed-off-by: Kevin Liu <kevinx.liu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch enabled Protocol Agnostic Flow (raw flow) Offloading Flow
Director (FDIR) in AVF, based on the Parser Library feature and the
existing rte_flow `raw` API.
The input spec and mask of raw pattern are first parsed via the
Parser Library, and then passed to the kernel driver to create the
flow rule.
Similar as ice PMD's implemnentation, each raw flow requires:
1. A byte string of raw target packet bits.
2. A byte string contains mask of target packet.
Here is an example:
FDIR matching ipv4 dst addr with 1.2.3.4 and redirect to queue 3:
flow create 0 ingress pattern raw \
pattern spec \
00000000000000000000000008004500001400004000401000000000000001020304 \
pattern mask \
000000000000000000000000000000000000000000000000000000000000ffffffff \
/ end actions queue index 3 / mark id 3 / end
Note that mask of some key bits (e.g., 0x0800 to indicate ipv4 proto)
is optional in our cases. To avoid redundancy, we just omit the mask
of 0x0800 (with 0xFFFF) in the mask byte string example. The prefix
'0x' for the spec and mask byte (hex) strings are also omitted here.
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add recommended matching list for i40e PMD in DPDK 21.05,
21.08, 21.11 and 22.03. And add a known issue when FW upgrade
to a version 8.4 and higher
Cc: stable@dpdk.org
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch adds queue and queue group priority configuration
support. The highest priority is 0, and the lowest priority
is 7.
Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Enable basic TM API for PF only. Support for adding profiles and queue
nodes. Only max bandwidth is supported in profiles. Profiles can be
assigned to target queues and queue group. To set up the exact queue
group, we need to reconfigure topology by delete and then recreate
queue nodes. Only TC0 is valid.
Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
1ca05831b9 added a check that SDP3 (used as a TX_DISABLE output to the
SFP cage on these cards) is not asserted to avoid incorrectly reporting
link up when the SFP's laser is turned off.
ff8162cb95 limited this workaround to fiber ports
This patch:
* Adds devarg 'fiber_sdp3_no_tx_disable' not all fiber ixgbe devs use
SDP3 as TX_DISABLE
Fixes: 1ca05831b9 ("net/ixgbe: fix link status")
Fixes: ff8162cb95 ("net/ixgbe: fix link status")
Cc: stable@dpdk.org
Signed-off-by: Jeff Daly <jeffd@silicom-usa.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Yellow meter action support is added in meter hierarchy validation.
If one color uses meter action, the other can only use NULL action
or the same meter action. And only shared meter is supported.
Signed-off-by: Shun Hao <shunh@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Vhost backend of different devices have different features.
Add an API to get vDPA device type, net device or blk device
currently, so users can set different features for different
kinds of devices.
Signed-off-by: Andy Pei <andy.pei@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
This patch adds the use case for async dequeue API. Vswitch can
leverage DMA device to accelerate vhost async dequeue path.
Signed-off-by: Wenwu Ma <wenwux.ma@intel.com>
Signed-off-by: Yuan Wang <yuanx.wang@intel.com>
Signed-off-by: Xuan Ding <xuan.ding@intel.com>
Tested-by: Yvonne Yang <yvonnex.yang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch implements asynchronous dequeue data path for vhost split
ring, a new API rte_vhost_async_try_dequeue_burst() is introduced.
Signed-off-by: Xuan Ding <xuan.ding@intel.com>
Signed-off-by: Yuan Wang <yuanx.wang@intel.com>
Tested-by: Yvonne Yang <yvonnex.yang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch introduces new APIs for the application
to query and reset per-virtqueue statistics. The
patch also introduces generic counters.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Since QEMU 5.2.0 fixes the vhost split ring multi-queue reconnection
issue in commit f66337bdbfda ("vhost-user: save features of multiqueues
if chardev is closed"), this patch updates known issue to indicate
the range of affeacted QEMU versions.
Fixes: b37e95507e ("doc: add vhost multi-queue reconnection issue")
Cc: stable@dpdk.org
Signed-off-by: Xuan Ding <xuan.ding@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
The port ownership concept was introduced in ethdev in DPDK 18.02.
Not sure it is used by applications except those using failsafe or netvsc.
It can also be used by libraries or applications to sort out
how ports are controlled.
Hiding sub-ports controlled by failsafe or netvsc look to be enough
justification to promote this API as stable.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Introduce a testpmd API so that drivers can register specific commands.
A driver can list some files to compile with testpmd, by setting them
in the testpmd_sources (driver local) meson variable.
drivers/meson.build then takes care of appending this to a global meson
variable, and adding the driver to testpmd dependency.
Note: testpmd.h is fixed to that it is self sufficient when being
included.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Add support for module EEPROM information format defined in
SFF-8636 Rev 2.7.
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Signed-off-by: Kevin Liu <kevinx.liu@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Add support for module EEPROM information format defined in
SFF-8472 Rev 12.0
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Signed-off-by: Kevin Liu <kevinx.liu@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Add support for module EEPROM information format defined in
SFF-8079 Rev 1.7.
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Signed-off-by: Kevin Liu <kevinx.liu@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Add a new telemetry command /ethdev/module_eeprom to dump the module
EEPROM of each port. The format of module EEPROM information follows
the SFF(Small Form Factor) Committee specifications.
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Signed-off-by: Kevin Liu <kevinx.liu@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
VMXNET3 version 6 supports some new features, including but not limited to:
- Increased maximum MTU up to 9190
- Increased maximum number of Rx and Tx queues
- Removes power-of-two limitations on queue sizes
- Extended interrupt structures (required for additional queues)
Tested, using testpmd, for different hardware versions on ESXi 7.0
Update 2.
Signed-off-by: Pankaj Gupta <pagupta@vmware.com>
Reviewed-by: Jochen Behrens <jbehrens@vmware.com>
Add RETA query and RETA update support for VMXNET3.
Tested, using testpmd, for different hardware versions on ESXi 7.0
Update 2.
Signed-off-by: Pankaj Gupta <pagupta@vmware.com>
Reviewed-by: Jochen Behrens <jbehrens@vmware.com>
Currently, meter object supports only DSCP based on input color table,
The patch enhance that to support VLAN based input color table,
color table based on inner field for the tunnel use case, and
support for fallback color per meter if packet based on a different field.
All of the above features are exposed through capability and added
additional capability to specify the implementation supports
more than one input color table per ethdev port.
Suggested-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Add support to read firmware configuration file from
/lib/firmware/cxgb4/ path in the filesystem. The firmware
config file is used to enable or disable NIC features before
firmware initialization to help retrieve better debug data to
analyze firmware init failures. The config file can also
be used to redistribute resources, like queues, TCAMs, etc.,
from disabled physical functions (PFs) to main PF, before
firmware init.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add CLI options to l3fwd_power to utilize the new power APIs introduced in
this patchset. These CLI options allow the user to configure the
heuritstics made available through the new API via the l3fwd_power
application options.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Add new get/set API to allow the user or application to set the minimum
and maximum frequencies to use when scaling.
Previously, the frequency range was determined by the HW capabilities of
the CPU. With this new API, the user or application can constrain this
if required.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: David Hunt <david.hunt@intel.com>
Add new get/set API for configuring 'pause_duration' which used to adjust
the pause mode callback duration.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: David Hunt <david.hunt@intel.com>
Add new get/set APIs to configure emptypoll max which is used to
determine when a queue can go into sleep state.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Tested-by: David Hunt <david.hunt@intel.com>
Add an implementation of the rte_lpm_lookupx4() function for platforms
without support for vector operations.
This will be useful in the upcoming RISC-V port as well as any platform
which may want to start with a basic level of LPM support.
Signed-off-by: Michal Mazurek <maz@semihalf.com>
Signed-off-by: Stanislaw Kardach <kda@semihalf.com>
Acked-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
- Added elliptic curve Diffie-Hellman parameters.
Point multiplication allows the user to process every phase of
ECDH, but for phase 1, user should not really care about the generator.
The user does not even need to know what the generator looks like,
therefore setting ec xform would make this work.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
ipsec-secgw application is updated to support
DES-CBC ciphering and XCBC-MAC authentication
based IPsec functionality.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add notes on list of algorithms supported for ACVP FIPS validation.
Signed-off-by: Gowrishankar Muthukrishnan <gmuthukrishn@marvell.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Tested-by: Jakub Poczatek <jakub.poczatek@intel.com>
This commit enables asymmetric crypto in generation four
devices (4xxx).
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Kai Ji <kai.ji@intel.com>
Test eventdev app is updated to add new option for asymmetric
crypto ops for event crypto adapter.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Using crypto devs requires the user to log in and the supplied DEK to be
encrypted with a KEK (keys encryption key).
KEK is burned once on the nic, along with credentials for users,
and for a user to log in, he is needed to supply his creds wrapped with
the KEK.
A device comes out of the Mellanox factory with a pre-defined import
method for each algorithm. The defined method could be wrapped
mode, so the device can be used as described above, or
plaintext mode, without the need to log in and wrap supplied DEKs.
Support crypto operations with the plaintext import method.
Signed-off-by: Raja Zidane <rzidane@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
The AltiVec header file is defining "vector", except in C++ build.
The keyword "vector" may conflict easily.
As a rule, it is better to use the alternative keyword "__vector".
The DPDK header file rte_altivec.h takes care of undefining "vector",
so the applications and dependencies are free to define the name "vector".
This is a compatibility breakage for applications which were using
the keyword "vector" for its AltiVec meaning.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Tested-by: Ali Alnubani <alialnu@nvidia.com>
Acked-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
The rte_pcapng_init function doesn't exist, so remove it from the docs.
Also fix minor mistakes in the file.
Signed-off-by: Cian Ferriter <cian.ferriter@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Shell used in documentation generation could not run on Windows.
Rewrite scripts in Python.
New scripts use proper path separators and handle paths with spaces.
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Reviewed-by: Bruce Richardson <bruce.richardson@intel.com>
API documentation index had spaces between link caption and URL,
which may be unsupported by some Markdown implementations.
That is, "[caption](URL)" is valid but "[caption] (URL)" is not.
The problematic behavior is observed with Doxygen on Windows.
Remove the spaces.
Unfortunately, Markdown syntax is not formally specified.
Fixes: 9bf486e606 ("doc: generate HTML for API with doxygen")
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
CSS for API documentation was customized by a shell script
modifying the file that Doxygen produces.
This way CSS code is kept in a script and an extra build step is added.
Move custom style to a plain CSS file.
Use Doxygen capability to attach this extra stylesheet.
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
This patch support copy, submit, completed and
completed status functionality of DMA driver.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Add additional PMD APIs for DPAA2 QDMA driver for configuring
RBP, Ultra Short format, and Scatter Gather support
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The DPAA2 DMA driver is an implementation of the dmadev APIs,
that provide means to initiate a DMA transaction from CPU.
Earlier this was part of RAW driver, but with DMA drivers
added as separate flavor of drivers, this driver is being
moved to DMA drivers.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
With DMA devices supported as a separate flavor of devices,
the DPAA2 QDMA driver is moved in the DMA devices.
This change removes the DPAA2 QDMA driver from raw devices.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Added API to set queue attributes at runtime and API to get weight and
affinity.
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Extended eventdev queue QoS attributes to support weight and affinity.
If queues are of the same priority, events from the queue with highest
weight will be scheduled first. Affinity indicates the number of times,
the subsequent schedule calls from an event port will use the same event
queue. Schedule call selects another queue if current queue goes empty
or schedule count reaches affinity count.
To avoid ABI break, weight and affinity attributes are not yet added to
queue config structure and rely on PMD for managing it. New eventdev op
queue_attr_get can be used to get it from the PMD.
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Added a new eventdev API rte_event_queue_attr_set(), to set event queue
attributes at runtime from the values set during initialization using
rte_event_queue_setup(). PMD's supporting this feature should expose the
capability RTE_EVENT_DEV_CAP_RUNTIME_QUEUE_ATTR.
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add function to quiesce any core specific resources consumed by
the event port.
When the application decides to migrate the event port to another lcore
or teardown the current lcore it may to call `rte_event_port_quiesce`
to make sure that all the data associated with the event port are released
from the lcore, this might also include any prefetched events.
While releasing the event port from the lcore, this function calls the
user-provided flush callback once per event.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Latest Sphinx checks C language syntax more aggressively.
Fix the following warning by correcting C language syntax.
doc/guides/prog_guide/event_ethernet_rx_adapter.rst:243:
WARNING: Could not lex literal_block as "c". Highlighting skipped.
Fixes: 3c838062b9 ("eventdev: introduce event vector Rx capability")
Cc: stable@dpdk.org
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com>
In packets with ESP header, the inner IP will be encrypted, and
its fields cannot be used for RSS hashing. So, ESP packets
can be hashed only by the outer IP layer.
So, when using RSS on ESP packets, hashing may not be efficient,
because the fields used by the hash functions are only the outer IPs,
causing all traffic belonging to all tunnels between a given
pair of GWs to land on one core.
Adding the SPI hash field can extend the spreading of IPsec packets.
Signed-off-by: Raja Zidane <rzidane@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Support matching IPv6 fragment extension header
with RTE_FLOW_ITEM_TYPE_IPV6_FRAG_EXT flow pattern item.
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Adding cnxk device driver support to configure custom SA index.
Custom SA index can be configured as part of the session create
as SPI, and later original SPI can be updated using session update.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Adding devargs support to parse custom SA action.
Devargs can be specified in the following way.
-a 0002:02:00.0,custom_sa_act=1
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Added support for RTE_FLOW_ITEM_TYPE_MARK. This item type
can be used to create ingress flow rules to match packets
from CPT's second pass packets.
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Implement support for the power management API by implementing a
'get_monitor_addr' function that will return an address of an RX ring's
status bit.
Signed-off-by: Kevin Liu <kevinx.liu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Support configuration of unicast and multicast promisc on dcf.
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Signed-off-by: Kevin Liu <kevinx.liu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
add API "mtu_set" to dcf, and it can configure the port mtu through
cmdline.
Signed-off-by: Jie Wang <jie1x.wang@intel.com>
Signed-off-by: Kevin Liu <kevinx.liu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
RSS HASH should be updated and queried by application,
Add related ops ('.rss_hash_update', '.rss_hash_conf_get') for DCF.
Because DCF doesn't support configure RSS HASH, only HASH key can be
updated within ops '.rss_hash_update'.
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Signed-off-by: Kevin Liu <kevinx.liu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
RSS RETA should be updated and queried by application,
Add related ops ('.reta_update', '.reta_query') for DCF.
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Signed-off-by: Kevin Liu <kevinx.liu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Dump Rx timestamp value into dynamic mbuf field by flex descriptor.
This feature is turned on by dev config "enable-rx-timestamp".
Currently, it's only supported under scalar path.
Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add recommended matching list for ice PMD in DPDK 22.03.
Cc: stable@dpdk.org
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
In order to speed-up the device suspend and resume, make the statistics
counters persistent in reconfiguration until the device gets removed.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
In async data path, when vring state changes or device is destroyed,
it is necessary to know the number of in-flight packets in DMA engine.
This patch provides a thread unsafe API to return the number of
in-flight packets for a vhost queue without using any lock.
Signed-off-by: Xuan Ding <xuan.ding@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Extended support for asymmetric crypto perf throughput test.
Added support for new modulus lengths.
Added new parameter --modex-len.
Supported lengths are 60, 128, 255, 448. Default length is 128.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Mlx5Devx library has new API's for setting and getting MTU.
Added new glue functions that wrap the new mlx5devx lib API's.
Implemented the os_ethdev callbacks to use the new glue
functions in Windows.
Signed-off-by: Adham Masarwah <adham@nvidia.com>
Tested-by: Idan Hackmon <idanhac@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Support of the set promiscuous modes by calling the new API
In Mlx5DevX Lib.
Added new glue API for Windows which will be used to communicate
with Windows driver to enable/disable PROMISC or ALLMC.
Signed-off-by: Adham Masarwah <adham@nvidia.com>
Tested-by: Idan Hackmon <idanhac@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
This patch adds quanta size configuration support.
Quanta size should between 256 and 4096, and be a product of 64.
Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Start a new release cycle with empty release notes.
Bump version and ABI minor.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Aaron Conole <aconole@redhat.com>
An errata exists where users may see reduced power savings when using
PMD Power Management. This issue occurs when compiling DPDK applications
with GCC-9 on platforms with TSX enabled. In rte_power_monitor_multi(),
the function may return without successfully starting the RTM
transaction (the _xbegin() fails).
Signed-off-by: David Hunt <david.hunt@intel.com>
Blank line added to the final telemetry example for the
cryptography device library as to fix the example
rendering.
Fixes: 1c559ee846 ("cryptodev: add telemetry endpoint for capabilities")
Cc: stable@dpdk.org
Signed-off-by: Sean Morrissey <sean.morrissey@intel.com>
Acked-by: Ciara Power <ciara.power@intel.com>
The docs mention modifications and additions to the cross file,
but there is no demonstration of how those should look like.
Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
Acked-by: Ruifeng Wang <ruifeng.wang@arm.com>
Numactl cross compilation doesn't work with clang, remove it
and fix the GCC cross compiler executable name.
Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
Acked-by: Ruifeng Wang <ruifeng.wang@arm.com>
The newer versions have an extra -none- in the name.
Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
Acked-by: Ruifeng Wang <ruifeng.wang@arm.com>
Remove CFLAGS and LDFLAGS since Meson doesn't support them well enough.
Add Meson alternatives: -Dc_args and -Dc_link_args on the command line
and in cross files.
Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
Acked-by: Ruifeng Wang <ruifeng.wang@arm.com>
From Documentation/admin-guide/kernel-parameters.txt, specifically the
last sentence:
nohz_full= [KNL,BOOT,SMP,ISOL]
The argument is a cpu list, as described above.
In kernels built with CONFIG_NO_HZ_FULL=y, set
the specified list of CPUs whose tick will be stopped
whenever possible. The boot CPU will be forced outside
the range to maintain the timekeeping. Any CPUs
in this list will have their RCU callbacks offloaded,
just as if they had also been called out in the
rcu_nocbs= boot parameter.
The kernel or-s the nohz_full cpumask into the rcu_nocbs cpumask at
startup, and uses that.
Signed-off-by: Tudor Brindus <me@tbrindus.ca>
The document roadmap section was missing any mention of the individual
drivers guides which are important for users. Add them to list.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The document roadmap section called out the titles of other documents,
but these are better as hyperlinks.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The document roadmap section was missing any mention of the individual
drivers guides which are important for users. Add them to list.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The document roadmap section called out the titles of other documents,
but these are better as hyperlinks.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
There are two warnings in the VFIO section about limitations of VFIO and
limitations on who can bind/unbind devices. Since these don't actually
describe any unsafe conditions, and are more informational, we can
change these to notes. This also helps emphasise the other warnings in
the documents which flag genuine security concerns.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Rather than having separate sections for VFIO and VFIO no-iommu mode, as
well as a separate section further down the document on troubleshooting
VFIO, we can consolidate all these as subsections into a primary VFIO
section. This section starts with the basics of VFIO use, then covers
no-iommu mode, before moving on to the more advanced topics such as
creating VFs and ending with the troubleshooting subsection.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
To further de-emphasise UIO over the alternatives, we can move the UIO
section of the drivers page to the end of the document, giving more
prominence to VFIO and bifurcated drivers.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The VFIO section of the page about Linux drivers was rather long and
unstructured. This can be improved by splitting it up into subsections,
to cover the specifics of memory limits and creating VFs. When moving
the various text notes into the relevant subsections, we can drop the
note about kernels earlier than 3.6, since DPDK no longer supports
kernels that old.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
VFIO is to be strongly preferred over UIO-based modules, so update our
text and examples to only refer to VFIO, giving an initial reference at
the start to UIO as a fallback option.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
While the details of VFIO and UIO may be of interest to some, most users
of the doc are likely primarily interested in how to bind their devices
to the kernel driver and then move on to running the app. Therefore, the
most important part of the "Linux Drivers" section of the GSG is the
subsection on "Binding and Unbinding", so put that first.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The GSG has a note warning that use of UIO is inherently unsafe due to
lack of IOMMU protection. However, this was only flagged as a "NOTE",
meaning it could easily be missed. Changing the rst tag from "note" to
"warning" and moving it to the top of the UIO subsection makes this a
lot more visible to users.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The docs on binding drivers was updated as part of the removal of the
igb_uio module from the main DPDK repo. As part of that update, a note
about uio_pci_generic requiring legacy interrupts was removed, but
should have been kept.
Fixes: 56bb5841fd ("kernel/linux: remove igb_uio")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Some IDEs, such as eclipse, complained on save about the use of special
characters in the (R) symbol in linux GSG doc. We can replace those with
the equivalent "|reg|" text, and including isonum.txt.
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The "Linux Drivers" section of the GSG already notes that, for use of
UIO, the IOMMU must be disabled or put into pass-through mode.
Therefore, there is no need to duplicate this information in the
"additional functionality" section. Also the kernel configuration
options documented in the section are enabled as standard on all common
distro kernels, so the information should not be needed in a GSG doc.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The KNI library is disabled by default in DPDK and is already documented
in the programmers guide and also in the sample application guide. There
are also in-kernel alternatives to it. Therefore, we can drop the
(already fairly minimal) reference to it from the Linux GSG.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
As best we can tell, the HPET timers are not commonly used, so there is
little need to give extensive detail and commentry on them in the Linux
GSG. As such, we can reduce the GSG section to just a single subsection
and also move it down the page below items which are likely of greater
importance.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Not all directories were given in the GSG document, but many of those
omitted would be of interest to users, e.g. "doc", "license" and
"usertools" directories. Adding these leaves only "devtools", and
"kernel" as the only undocumented directories, so add them in too for
completeness.
When updating the section, add "including" to the line leading up to the
directory list, indicating that, while the list is currently complete,
it is not guaranteed to always be.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
When building end-applications linked with DPDK, the only additional
tool needed is pkg-config/pkgconf. However, the standard development
tools meta-packages on most distro's include this as standard, meaning
it does not really require its own section. The one outlier in the
existing text is "alpine" where it is not present when using "libc-dev"
target. However, changing "gcc" and "libc-dev" to "alpine-sdk"
metapackage aligns alpine with the other distros in this regard.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
A note about secure boot not allowing UIO is present in both the system
requirements section and the driver binding section. This fits better in
the driver binding section, so the copy in system requirements can be
removed. The document in general now also emphasises VFIO over UIO more
than when this note was first added, reducing the need for this warning
to be repeated.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Some minor updates for the section on builing DPDK in the GSG:
* update Python 3.7 package name to the 3.8 version
* note that the pyelftools needs to be tied to the python version
* drop reference to jansson library for legacy telemetry
* replace special characters for (R)
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Multi-Packet Rx queue uses PMD-managed buffers to store packets.
These buffers are externally attached to user mbufs.
This conflicts with the feature that allows using user-managed
externally attached buffers in an application.
Add the corresponding limitation to MLX5 documentation that MPRQ
and external data buffers cannot be used together.
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
This patch adds mlx5 specifics description about
handling the Ethernet type by modify field action
for VLAN-ed traffic.
Fixes: 641dbe4fb0 ("net/mlx5: support modify field flow action")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
A flow rule with sample action will be split into two sub flows,
and a tag action was added implicitly in the sample prefix sub flow,
the reserved metadata regC index was used for this tag action.
The reserved metadata regC was shared with metering action,
for ConnectX-5 trusted device (VF/SF), the reserved metadata regC was
invalid since PF only supported the legacy metering.
This patch adds the checking for the tag index and back to use the
application tag if a failure happened.
Fixes: a9b6ea45be ("net/mlx5: fix tag ID conflict with sample action")
Cc: stable@dpdk.org
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Trusted VF is needed to offload rules with rte_flow to a group
that is bigger than 0.
The configuration is done in two parts: driver and FW.
This patch adds the needed steps to configure a VF to be trusted.
Signed-off-by: Asaf Penso <asafp@nvidia.com>
Reviewed-by: Raslan Darawsheh <rasland@nvidia.com>
When E-Switch mode was enabled, the NIC egress flows was implicitly
appended with source vport to match on. If the metadata register C0
was used to maintain the source vport, it was initialized to zero
on packet steering engine entry, the flow could be hit only
if source vport was zero, the register C0 of the packet was not correct
to match in the TX side, this caused egress flow misses.
This patch:
- removes the implicit source vport match for NIC egress flow.
- rejects the NIC egress flows on the representor ports at validation.
- allows the internal NIC egress flows containing the TX_QUEUE items in
order to not impact hairpins.
Fixes: ce777b147b ("net/mlx5: fix E-Switch flow without port item")
Cc: stable@dpdk.org
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Add support to define ipv4 and ipv6 forwarding tables
from reading from a config file for EM with a format
similar to l3fwd-acl one.
Users can now use the default hardcoded route tables
or optionally config files for 'l3fwd_em'. Default
config files have been provided for use with EM.
Related l3fwd docs have been updated to reflect these
changes.
Signed-off-by: Sean Morrissey <sean.morrissey@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This fixes typos and punctuation in the rte flow API guide.
Fixes: 2f82d143fb ("ethdev: add group jump action")
Fixes: 4d73b6fb99 ("doc: add generic flow API guide")
Cc: stable@dpdk.org
Signed-off-by: Ali Alnubani <alialnu@nvidia.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
To enable the gpudev rte_gpu_mem_cpu_map feature to expose
GPU memory to the CPU, the GPU CUDA driver library needs
the GDRCopy library and driver.
If DPDK is built without GDRCopy, the GPU CUDA driver returns
error if the is invoked rte_gpu_mem_cpu_map.
All the others GPU CUDA driver functionalities are not affected by
the absence of GDRCopy, thus this is an optional functionality
that can be enabled in the GPU CUDA driver.
CUDA driver documentation has been updated accordingly.
Signed-off-by: Elena Agostini <eagostini@nvidia.com>
The features list were missed when introducing the driver.
Fixes: 1306a73b19 ("gpu/cuda: introduce CUDA driver")
Cc: stable@dpdk.org
Signed-off-by: Elena Agostini <eagostini@nvidia.com>
Add support queue/RSS action for external Rx queue.
In indirection table creation, the queue index will be taken from
mapping array.
This feature supports neither LRO nor Hairpin.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Add option to probe common device using import CTX/PD functions instead
of create functions.
This option requires accepting the context FD and the PD handle as
devargs.
This sharing can be useful for applications that use PMD for only some
operations. For example, an app that generates queues itself and uses
PMD just to configure flow rules.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
This patch adds matching on the optional fields (checksum/key/sequence)
of GRE header. The matching on checksum and sequence fields requests
support from rdma-core with the capability of misc5 and tunnel_header 0-3.
For patterns without checksum and sequence specified, keep using misc for
matching as before, but for patterns with checksum or sequence, validate
capability first and then use misc5 for the matching.
Signed-off-by: Sean Zhang <xiazhang@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
'gre_option' flow item was missing in the feature list, adding it.
Fixes: f61490bdf2 ("ethdev: support GRE optional fields")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Add CNF95xx B0 variant to the list of supported models.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Currently inline inbound device usage is not default for eventdev,
patch renames force_inl_dev dev arg to no_inl_dev and enables inline
inbound device by default.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
cnxk platform supports red/yellow packet marking based on TM
configuration. This patch set hooks to enable/disable packet
marking for VLAN DEI, IP DSCP and IP ECN. Marking enabled only
in scalar mode.
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Added capability and support for inline inbound IP reassembly
in cnxk driver. The IP reassembly offload is supported only
when the inline IPSec security offload is enabled.
In case of IP reassembly incomplete, the mbufs are attached
in the mbuf dynamic field and a dynamic flag is set accordingly.
Signed-off-by: Vidya Sagar Velumuri <vvelumuri@marvell.com>
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
The HW steering uses async queue-based flow rules management
mechanism. The matcher and part of the actions have been
prepared during flow table creation. Some remaining actions
will be constructed during flow creation if needed.
A flow postpone attribute bit describes if flow management
should be applied to the HW directly. An extra push function
is provided to force push all the cached flows to the HW.
Once the flow has been applied to the HW, the pull function
will be called to get the queued creation/destruction flows.
The DR rule flow memory is represented in PMD layer instead
of allocating from HW steering layer. While destroying the
flow, the flow rule memory can only be freed after the CQE
received.
The HW queue job descriptor is currently introduced to convey
the flow information and operation type between the flow
insertion/destruction in the pull function.
This commit adds the basic flow queue operation for:
rte_flow_async_create();
rte_flow_async_destroy();
rte_flow_push();
rte_flow_pull();
Signed-off-by: Suanming Mou <suanmingm@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
The new hardware steering engine relies on using dedicated steering WQEs
instead of writing to the low-level steering table entries directly.
In the first implementation the hardware steering engine supports the
new queue based Flow API, the existing synchronous non-queue based Flow
API is not supported.
A new dv_flow_en value 2 is added to manage mlx5 PMD steering engine:
dv_flow_en rte_flow API rte_flow_async API
------------------------------------------------
0 support not support
1 support not support
2 not support support
This commit introduces the extra dv_flow_en = 2 to specify the new
flow initialize and manage operation routine.
Signed-off-by: Suanming Mou <suanmingm@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
The hardware since ConnectX-7 supports waiting on
specified moment of time with new introduced wait
descriptor. A timestamp can be directly placed
into descriptor and pushed to sending queue.
Once hardware encounter the wait descriptor the
queue operation is suspended till specified moment
of time. This patch update the Tx datapath to handle
this new hardware wait capability.
PMD documentation and release notes updated accordingly.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Add testpmd support for the rte_flow_async_action_handle API.
Provide the command line interface for operations dequeue.
Usage example:
flow queue 0 indirect_action 0 create action_id 9
ingress postpone yes action rss / end
flow queue 0 indirect_action 0 update action_id 9
action queue index 0 / end
flow queue 0 indirect_action 0 destroy action_id 9
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Add testpmd support for the rte_flow_pull API.
Provide the command line interface for pulling operations results.
Usage example: flow pull 0 queue 0
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Add testpmd support for the rte_flow_push API.
Provide the command line interface for pushing operations.
Usage example: flow queue 0 push 0
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Add testpmd support for the rte_flow_q_create/rte_flow_q_destroy API.
Provide the command line interface for enqueueing flow
creation/destruction operations. Usage example:
testpmd> flow queue 0 create 0 postpone no
template_table 6 pattern_template 0 actions_template 0
pattern eth dst is 00:16:3e:31:15:c3 / end actions drop / end
testpmd> flow queue 0 destroy 0 postpone yes rule 0
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Add testpmd support for the rte_flow_table API.
Provide the command line interface for the flow
table creation/destruction. Usage example:
testpmd> flow template_table 0 create table_id 6
group 9 priority 4 ingress mode 1
rules_number 64 pattern_template 2 actions_template 4
testpmd> flow template_table 0 destroy table 6
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Add testpmd support for the rte_flow_pattern_template and
rte_flow_actions_template APIs. Provide the command line interface
for the template creation/destruction. Usage example:
testpmd> flow pattern_template 0 create pattern_template_id 2
template eth dst is 00:16:3e:31:15:c3 / end
testpmd> flow actions_template 0 create actions_template_id 4
template drop / end mask drop / end
testpmd> flow actions_template 0 destroy actions_template 4
testpmd> flow pattern_template 0 destroy pattern_template 2
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Add testpmd support for the rte_flow_configure API.
Provide the command line interface for the Flow management.
Usage example: flow configure 0 queues_number 8 queues_size 256
Implement rte_flow_info_get API to get available resources:
Usage example: flow info 0
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Queue-based flow rules management mechanism is suitable
not only for flow rules creation/destruction, but also
for speeding up other types of Flow API management.
Indirect action object operations may be executed
asynchronously as well. Provide async versions for all
indirect action operations, namely:
rte_flow_async_action_handle_create,
rte_flow_async_action_handle_destroy and
rte_flow_async_action_handle_update.
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
A new, faster, queue-based flow rules management mechanism is needed for
applications offloading rules inside the datapath. This asynchronous
and lockless mechanism frees the CPU for further packet processing and
reduces the performance impact of the flow rules creation/destruction
on the datapath. Note that queues are not thread-safe and the queue
should be accessed from the same thread for all queue operations.
It is the responsibility of the app to sync the queue functions in case
of multi-threaded access to the same queue.
The rte_flow_async_create() function enqueues a flow creation to the
requested queue. It benefits from already configured resources and sets
unique values on top of item and action templates. A flow rule is enqueued
on the specified flow queue and offloaded asynchronously to the hardware.
The function returns immediately to spare CPU for further packet
processing. The application must invoke the rte_flow_pull() function
to complete the flow rule operation offloading, to clear the queue, and to
receive the operation status. The rte_flow_async_destroy() function
enqueues a flow destruction to the requested queue.
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Treating every single flow rule as a completely independent and separate
entity negatively impacts the flow rules insertion rate. Oftentimes in an
application, many flow rules share a common structure (the same item mask
and/or action list) so they can be grouped and classified together.
This knowledge may be used as a source of optimization by a PMD/HW.
The pattern template defines common matching fields (the item mask) without
values. The actions template holds a list of action types that will be used
together in the same rule. The specific values for items and actions will
be given only during the rule creation.
A table combines pattern and actions templates along with shared flow rule
attributes (group ID, priority and traffic direction). This way a PMD/HW
can prepare all the resources needed for efficient flow rules creation in
the datapath. To avoid any hiccups due to memory reallocation, the maximum
number of flow rules is defined at the table creation time.
The flow rule creation is done by selecting a table, a pattern template
and an actions template (which are bound to the table), and setting unique
values for the items and actions.
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
The flow rules creation/destruction at a large scale incurs a performance
penalty and may negatively impact the packet processing when used
as part of the datapath logic. This is mainly because software/hardware
resources are allocated and prepared during the flow rule creation.
In order to optimize the insertion rate, PMD may use some hints provided
by the application at the initialization phase. The rte_flow_configure()
function allows to pre-allocate all the needed resources beforehand.
These resources can be used at a later stage without costly allocations.
Every PMD may use only the subset of hints and ignore unused ones or
fail in case the requested configuration is not supported.
The rte_flow_info_get() is available to retrieve the information about
supported pre-configurable resources. Both these functions must be called
before any other usage of the flow API engine.
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Add support for inline inbound SPI range via devargs
instead of just max SPI value and range being 0..max.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Adds support for priority flow control support for CNXK
platforms.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
The "tx_db_nc" devarg forces doorbell register mapping to non-cached
region eliminating the extra write memory barrier. This argument was
used in creating the UAR for Tx and thus affected its performance.
Recently [1] its use has been extended to all UAR creation in all mlx5
drivers, and now its name is no longer so accurate.
This patch changes its name to "sq_db_nc" to suit any send queue that
uses it. The old name will still work for backward compatibility.
[1] commit 5dfa003db5 ("common/mlx5: fix post doorbell barrier")
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Reviewed-by: Raslan Darawsheh <rasland@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Adds new documentation for MLX5 common driver that contains:
- Its features list (doesn't exist for now).
- Its devargs description.
- Device configuration information and tutorial.
- Quick Start Guide for Mellanox OFED/EN.
Move into this doc all shared information from other MLX5 PMD docs and
add them reference to new common doc.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Reviewed-by: Raslan Darawsheh <rasland@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Vectorized routines were removed in result of Tx datapath refactoring,
and devarg keys documentation was updated.
However, more updating should have been done. In environment variables
doc, there was explanation according to vectorized Tx which isn't
relevant anymore.
This patch removes this irrelevant explanation.
Fixes: a6bd4911ad ("net/mlx5: remove Tx implementation")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Reviewed-by: Raslan Darawsheh <rasland@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
The default missing Tx completion timeout was set to 5 seconds.
In order to provide users with the interface to control this timeout
to adjust it with the application's watchdog, the device argument for
controlling this value was added.
The parameter is called 'miss_txc_to' and can be modified using the
devargs interface:
./app -a <bdf>,miss_txc_to=UINT_NUMBER
This parameter accepts values from 0 to 60 and indicates number of
seconds after which the Tx packet will be considered as missing.
HW hints for the Tx completions timeout were removed to do not overwrite
parameter from the user. Also specifying default Tx completion timeout
value was moved from the configuration to init phase in order to
simplify default value assignment.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Dawid Gorecki <dgr@semihalf.com>
Reviewed-by: Shai Brandes <shaibran@amazon.com>
ENA was only supporting retrieval of all the xstats name and wasn't
implementing the eth_xstats_get_names_by_id API.
As this API may be more efficient than retrieving all the names, it
tries to avoid excessive string copying.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Dawid Gorecki <dgr@semihalf.com>
Reviewed-by: Shai Brandes <shaibran@amazon.com>
ENA driver did not allow applications to call tx_cleanup. Freeing Tx
mbufs was always done by the driver and it was not possible to manually
request the driver to free mbufs.
Modify ena_tx_cleanup function to accept maximum number of packets to
free and return number of packets that was freed.
Signed-off-by: Dawid Gorecki <dgr@semihalf.com>
Reviewed-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Shai Brandes <shaibran@amazon.com>
Originally, the ena_com memzone counter was shared by ports, which
caused the memzones to be harder to identify and could potentially
lead to race and because of that the counter had to be atomic.
This atomic counter was global variable and it couldn't work in the
multiprocess implementation.
The memzone is now being identified by the local to port memzone counter
and the port ID - both of those information can be found in the shared
data, so it can be probed easily.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Dawid Gorecki <dgr@semihalf.com>
Reviewed-by: Shai Brandes <shaibran@amazon.com>
Due to how the ena_com compatibility layer is written, all AQ commands
triggering functions use stack to save results of AQ and then copy them
to user given function.
Therefore to keep the compatibility layer common, introduce ENA_PROXY
macro. It either calls the wrapped function directly (in primary
process) or proxies it to the primary via DPDK IPC mechanism. Since all
proxied calls are taken under a lock share the result data through
shared memory (in struct ena_adapter) to work around 256B IPC parameter
size limit.
New proxy calls can be added by
1. Adding a new message type at the end of enum ena_mp_req
2. Adding new message arguments to the struct ena_mp_body if needed
3. Defining proxy request descriptor with ENA_PROXY_DESC. Its arguments
include handlers for request preparation and response processing.
Any of those may be empty (aside of marking arguments as used).
4. Adding request handling logic to ena_mp_primary_handle()
5. Replacing proxied function calls with ENA_PROXY(adapter, <func>, ...)
Signed-off-by: Stanislaw Kardach <kda@semihalf.com>
Reviewed-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Dawid Gorecki <dgr@semihalf.com>
Reviewed-by: Shai Brandes <shaibran@amazon.com>
As the default behavior for arm64 is to alias rte_memcpy as memcpy, ENA
cannot redefine memcpy as rte_memcpy as it would cause nested
declaration.
To make it possible to use optimized memcpy in the ena_com layer on Arm,
the driver now redefines memcpy when it is beneficial:
* For arm64 only when the flag RTE_ARCH_ARM64_MEMCPY was defined
* For arm only when the flag RTE_ARCH_ARM_NEON_MEMCPY was defined
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Dawid Gorecki <dgr@semihalf.com>
Reviewed-by: Shai Brandes <shaibran@amazon.com>
ENA uses AENQ for notification about various events, like LSC, keep
alive etc. By default it was enabling all AENQ that were supported by
both the driver and the device. As a result the LSC was always processed
even if the application turned it off explicitly.
As the DPDK provides application with the possibility to configure the
LSC, ENA should respect that. AENQ groups are now being updated upon
configure step, thus LSC can be activated or disabled between ENA PMD
reconfigurations. Moreover, the LSC capability for the device is being
determined dynamically.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Dawid Gorecki <dgr@semihalf.com>
Reviewed-by: Shai Brandes <shaibran@amazon.com>
* Split 'bad_csum' Rx statistic into 'l3_csum_bad' and 'l4_csum_bad' to
be able to check which checksum was not calculated properly.
* Add l4_csum_good statistic, which shows how many times L4 Rx checksum
was properly offloaded.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Dawid Gorecki <dgr@semihalf.com>
Reviewed-by: Shai Brandes <shaibran@amazon.com>
When an AF_XDP PMD is created without specifying the 'start_queue', the
default Rx queue associated with the socket will be Rx queue 0. A common
scenario encountered by users new to AF_XDP is that they create the
socket on queue 0 however their interface is configured with many more
queues. In this case, traffic might land on for example queue 18 which
means it will never reach the socket.
This commit updates the AF_XDP documentation with instructions on how to
configure the interface to ensure the traffic will land on queue 0 and
thus reach the socket successfully.
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add support for L2TPv2(include PPP over L2TPv2) protocols FDIR
based on outer MAC src/dst address and L2TPv2 session ID.
Add support for PPPoL2TPv2oUDP protocols FDIR based on inner IP
src/dst address and UDP/TCP src/dst port.
Patterns are listed below:
eth/ipv4(6)/udp/l2tpv2
eth/ipv4(6)/udp/l2tpv2/ppp
eth/ipv4(6)/udp/l2tpv2/ppp/ipv4(6)
eth/ipv4(6)/udp/l2tpv2/ppp/ipv4(6)/udp
eth/ipv4(6)/udp/l2tpv2/ppp/ipv4(6)/tcp
Signed-off-by: Jie Wang <jie1x.wang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add support for L2TPv2(include PPP over L2TPv2) protocols RSS based
on outer MAC src/dst address and L2TPv2 session ID.
Patterns are listed below:
eth/ipv4/udp/l2tpv2
eth/ipv4/udp/l2tpv2/ppp
eth/ipv6/udp/l2tpv2
eth/ipv6/udp/l2tpv2/ppp
Signed-off-by: Jie Wang <jie1x.wang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Updated AESNI MB and AESNI GCM, KASUMI, ZUC and SNOW3G PMD documentation
guides with information about the latest Intel IPSec Multi-buffer
library supported.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Added missing step for converting SHA request files to correct
format. Replaced AES_GCM with GCM to follow the correct
naming format.
Fixes: 3d0fad56b7 ("examples/fips_validation: add crypto FIPS application")
Cc: stable@dpdk.org
Signed-off-by: Jakub Poczatek <jakub.poczatek@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Add support to enable per port packet pool and also override
vector pool size from command line args. This is useful
on some HW to tune performance based on usecase.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
This commit refactors asummetric crypto functions
in Intel QuickAssist Technology PMD.
Functions right now are shorter and far easier readable,
plus it facilitates addition of new algorithms.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
In crypto producer mode, producer core enqueues cryptodev with software
generated crypto ops and worker core dequeues crypto completion events
from the eventdev. Event crypto metadata used for above processing is
pre-populated in each crypto session.
Parameter --prod_type_cryptodev can be used to enable crypto producer
mode. Parameter --crypto_adptr_mode can be set to select the crypto
adapter mode, 0 for OP_NEW and 1 for OP_FORWARD.
This mode can be used to measure the performance of crypto adapter.
Example:
./dpdk-test-eventdev -l 0-2 -w <EVENTDEV> -w <CRYPTODEV> -- \
--prod_type_cryptodev --crypto_adptr_mode 1 --test=perf_atq \
--stlist=a --wlcores 1 --plcores 2
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Grinder configuration is now moved to sched library.
Number of grinders can also modified by specifying
RTE_SCHED_PORT_N_GRINDERS=N in CFLAGS, where N is number of grinders.
Signed-off-by: Megha Ajmera <megha.ajmera@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The documentation on how to configure device instances using
accel-config can be improved by a number of changes:
* For initial example, when only configuring one queue, omit
configuration of a second engine, which is unused later.
* Add the "max-batch-size" setting to the options being configured for
each queue
* Add a final, more complete example, showing configuration of multiple
queues on a device.
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
For DMA device 0000:7d:0.0, the original generated dmadev name starts
with the "7d:0.0", which is not expected.
This patch uses rte_pci_device_name API to generates the dmadev name.
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
The Kunpeng930 DMA devices have the same PCI device id with Kunpeng920,
but with different PCI revision and register layout. This patch
introduces the basic initialization for Kunpeng930 DMA devices.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
rte_gpu_mem_cpu_map() exposes a GPU memory area to the CPU.
In gpudev communication list this is useful to store the
status flag.
A communication list status flag allocated on GPU memory
and mapped for CPU visibility can be updated by CPU and polled
by a GPU workload.
The polling operation is more frequent than the CPU update operation.
Having the status flag in GPU memory reduces the GPU workload polling
latency.
If CPU mapping feature is not enabled, status flag resides in
CPU memory registered so it's visible from the GPU.
To facilitate the interaction with the status flag, this patch
provides also the set/get functions for it.
Signed-off-by: Elena Agostini <eagostini@nvidia.com>
Add PMD parameter that allows one to select only subset of available
GPIOs.
This might be useful in cases where some GPIOs are already reserved yet
still available for userspace access but particular app should not touch
them.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add support for custom interrupt handlers. Custom interrupt
handlers bypass kernel completely and are meant for fast
and low latency access to GPIO state.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Add initial support for PMD that allows to control particular pins form
userspace. Moreover PMD allows to attach custom interrupt handlers to
controllable GPIOs.
Main users of this PMD are dataplain applications requiring fast and low
latency access to pin state.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Add support for allow or block list for devices bound
to the kernel driver.
When used the allow or block list applies as an additional
condition to the name prefix.
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Reviewed-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Kevin Laatz <kevin.laatz@intel.com>
Adding useful debug prints in DPAA driver for
easy debugging. A devarg is added to enable various levels
of prints.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
This patch supports ordered queue for DPAA2 platform.
A devarg is added to enable strict ordering.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Few useful debug prints added in dequeue function.
These are controlled via pmd devargs. Details of using the
devarg is updated in dpaa2_sec.rst
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Rather than the asym session create function returning a session on
success, and a NULL value on error, it is modified to now return int
values - 0 on success or -EINVAL/-ENOTSUP/-ENOMEM on failure.
The session to be used is passed as input.
This adds clarity on the failure of the create function, which enables
treating the -ENOTSUP return as TEST_SKIPPED in test apps.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
A user data field is added to the asymmetric session structure.
Relevant API added to get/set the field.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
The rte_cryptodev_asym_session structure is now moved to an internal
header. This will no longer be used directly by apps,
private session data can be accessed via get API.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Rather than using a session buffer that contains pointers to private
session data elsewhere, have a single session buffer.
This session is created for a driver ID, and the mempool element
contains space for the max session private data needed for any driver.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
The programmer's guide for cryptodev included sample code for using
Asymmetric crypto. This is now replaced with direct code from the test
application, using literal includes. It is broken into snippets as the
test application didn't have all of the required code in one function.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
The "feature" BBDEV API is useless as all baseband drivers
must implement it by definition.
The non-implemented features should not be marked with "N".
Keeping them blank is clearer to read in the resulting matrix.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
When libxdp is used, the LIBXDP_OBJECT_PATH environment variable must be
set to the location of where libxdp placed its bpf object files. This is
usually in /usr/local/lib/bpf or /usr/local/lib64/bpf. Failure to do so
will result in the PMD not initialising correctly as the bpf program is
not found. Document this requirement.
Also, mention that the following logs which are generated on application
launch can be ignored:
libbpf: elf: skipping unrecognized data section(7) .xdp_run_config
libbpf: elf: skipping unrecognized data section(8) xdp_metadata
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add gre_option command for matching optional fields
(checksum/key/sequence) in GRE header. The item must follow gre item,
and the item does not change the flags in gre item, the application
should set the flags in gre item correspondingly.
Application can still use gre_key item 'gre_key value is xx' for key
matching, the effect is the same with using 'gre_option key is xx'.
The examples for gre_option are as follows:
To match on checksum field with value 0x11:
testpmd> ... pattern / eth / gre c_bit is 1 / gre_option checksum is
0x11 / end ..
To match on checksum field with value 0x11 and any value of key:
testpmd> ... pattern / eth / gre c_bit is 1 k_bit is 1 / gre_option
checksum is 0x11 / end ..
To match on checksum field with value 0x11 and no key field in packet:
testpmd> ... pattern / eth / gre c_bit is 1 k_bit is 0 / gre_option
checksum is 0x11 / end ..
The invalid patterns for gre_option are as follows:
testpmd> ... pattern / eth / gre / gre_option checksum is 0x11 / end ..
(c_bit in gre item not present)
testpmd> ... pattern / eth / gre c_bit is 0 / gre_option checksum is 0x11 /
end .. (c_bit is unset for gre item, but checksum is
specified by gre_option item)
Signed-off-by: Sean Zhang <xiazhang@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Add flow pattern items and header format for matching optional fields
(checksum/key/sequence) in GRE header. And the flags in gre item should
be correspondingly set with the new added items.
Signed-off-by: Sean Zhang <xiazhang@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Secondary process support had been disabled for the AF_XDP PMD because
there was no logic in place to share the AF_XDP socket file descriptors
between the processes. This commit introduces this logic using the IPC
APIs.
Rx and Tx are disabled in the secondary process due to memory mapping of
the AF_XDP rings being assigned by the kernel in the primary process only.
However other operations including retrieval of stats are permitted.
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Support to configure LED in firmware. Driver commands firmware to turn
the LED on and off. And OEM customize their LED solutions in firmware.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Support to get OEM customized LED configuration information from firmware.
And driver needs to adjust the process of PHY setup link, based on this
LED configuration.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Added the ethdev dump API which provides querying private info from device.
There exists many private properties in different PMD drivers, such as
adapter state, Rx/Tx func algorithm in hns3 PMD. The information of these
properties is important for debug. As the information is private, the new
API is introduced.
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
MPRQ cannot be used in multi-process applications because of
externally attached MPRQ buffers. A callback is registered by
a primary process to free MPRQ buffers once they are no longer
needed. But this information is shared among all the processes.
The virtual address of the mlx5_mprq_buf_free_cb function is
different in a secondary process, which leads to a segmentation
fault. Document that MPRQ is not supported in a multi-process
app, since there is no way to find out if this is the one.
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Since dmadev is introduced in 21.11, to avoid the overhead of vhost DMA
abstraction layer and simplify application logics, this patch integrates
dmadev in asynchronous data path.
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Signed-off-by: Sunil Pai G <sunil.pai.g@intel.com>
Tested-by: Yvonne Yang <yvonnex.yang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch supports drop any and steer all to queue in switch
filter. Support new rte_flow pattern any to handle all packets.
The usage is listed below.
1. drop any:
flow create 0 ingress pattern any / end actions drop / end
All packets received in port 0 will be dropped.
2. steer all to queue:
flow create 0 ingress pattern any / end actions queue index 3 / end
All packets received in port 0 will be steered to queue 3.
Signed-off-by: Yuying Zhang <yuying.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
IP Reassembly is a costly operation if it is done in software.
The operation becomes even more costlier if IP fragments are encrypted.
However, if it is offloaded to HW, it can considerably save application
cycles.
Hence, a new offload feature is exposed in eth_dev ops for devices which
can attempt IP reassembly of packets in hardware.
- rte_eth_ip_reassembly_capability_get() - to get the maximum values
of reassembly configuration which can be set.
- rte_eth_ip_reassembly_conf_set() - to set IP reassembly configuration
and to enable the feature in the PMD (to be called before
rte_eth_dev_start()).
- rte_eth_ip_reassembly_conf_get() - to get the current configuration
set in PMD.
Now when the offload is enabled using rte_eth_ip_reassembly_conf_set(),
the resulting reassembled IP packet would be a typical segmented mbuf in
case of success.
And if reassembly of IP fragments is failed or is incomplete (if
fragments do not come before the reass_timeout, overlap, etc), the mbuf
dynamic flags can be updated by the PMD. This is updated in a subsequent
patch.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
This patch adds L2TPv2 control message and 5 types of data message
support for testpmd.
The added L2TPv2 message types are listed below:
1. L2TPv2 control
2. L2TPv2
3. L2TPv2 + length option
4. L2TPv2 + sequence option
5. L2TPv2 + offset option
6. L2TPv2 + length option + sequence option
Signed-off-by: Jie Wang <jie1x.wang@intel.com>
Acked-by: Ori Kam <orika@nvidia.com>
This patch defines new RSS offload type for L2TPv2, which
is required when users want to distribute packets based on
the L2TPv2 session ID field.
Signed-off-by: Jie Wang <jie1x.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Enable the possibility to expose a GPU memory area and make it
accessible from the CPU.
GPU memory has to be allocated via rte_gpu_mem_alloc().
This patch allows the gpudev library to map (and unmap),
through the GPU driver, a chunk of GPU memory and to return
a memory pointer usable by the CPU to access the GPU memory area.
Signed-off-by: Elena Agostini <eagostini@nvidia.com>
DPDK 21.11 adds vfio support for DMA device in vhost. This patch
updates recommended IOVA mode in async datapath.
Signed-off-by: Xuan Ding <xuan.ding@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Patch adds command line options to configure queue based
priority flow control.
- Syntax command is given as below:
set pfc_queue_ctrl <port_id> rx <on|off> <tx_qid> <tx_tc> \
tx <on|off> <rx_qid> <rx_tc> <pause_time>
- Example command to configure queue based priority flow control
on rx and tx side for port 0, Rx queue 0, Tx queue 0 with pause
time 2047
testpmd> set pfc_queue_ctrl 0 rx on 0 0 tx on 0 0 2047
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Based on device support and use-case need, there are two different ways
to enable PFC. The first case is the port level PFC configuration, in
this case, rte_eth_dev_priority_flow_ctrl_set() API shall be used to
configure the PFC, and PFC frames will be generated using based on VLAN
TC value.
The second case is the queue level PFC configuration, in this
case, Any packet field content can be used to steer the packet to the
specific queue using rte_flow or RSS and then use
rte_eth_dev_priority_flow_ctrl_queue_configure() to configure the
TC mapping on each queue.
Based on congestion selected on the specific queue, configured TC
shall be used to generate PFC frames.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Csum forwarding mode only supports software UDP/TCP csum calculation
for single segment packets when hardware offload is not enabled.
This patch enables software UDP/TCP csum calculation over multiple
segments.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Tested-by: Sunil Pai G <sunil.pai.g@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add functions to call rte_raw_cksum_mbuf() to calculate IPv4/6
UDP/TCP checksum in mbuf which can be over multi-segments.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Aman Singh <aman.deep.singh@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Sunil Pai G <sunil.pai.g@intel.com>
This patch enables method to provide key and mask for raw rules
to be provided as hexadecimal values. There is new parameter
pattern_mask added to support this.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
AF_XDP support is deprecated in libbpf since v0.7.0 [1]. The libxdp library
now provides the functionality which once was in libbpf and which the
AF_XDP PMD relies on. This commit updates the AF_XDP meson build to use the
libxdp library if a version >= v1.2.2 is available. If it is not available,
only versions of libbpf prior to v0.7.0 are allowed, as they still contain
the required AF_XDP functionality.
libbpf still remains a dependency even if libxdp is present, as we use
libbpf APIs for program loading.
The minimum required kernel version for libxdp for use with AF_XDP is v5.3.
For the library to be fully-featured, a kernel v5.10 or newer is
recommended. The full compatibility information can be found in the libxdp
README.
v1.2.2 of libxdp includes an important fix required for linking with DPDK
which is why this version or greater is required. Meson uses pkg-config to
verify the version of libxdp on the system, so it is necessary that the
library is discoverable using pkg-config in order for the PMD to use it. To
verify this, you can run: pkg-config --modversion libxdp
[1] https://github.com/libbpf/libbpf/commit/277846bc6c15
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
eCPRI message can be over Ethernet layer (.1Q supported also) or over
UDP layer. Message header formats are the same in these two variants.
Only up though the first packet header in the PDU can be matched.
RSS on the eCPRI payload is not supported.
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Hyong Youb Kim <hyonkim@cisco.com>
Expose Linux EAL ability to reuse existing hugepage files
via --huge-unlink=never switch.
Default behavior is unchanged, it can also be specified
using --huge-unlink=existing for consistency.
Old --huge-unlink switch is kept,
it is an alias for --huge-unlink=always.
Add a test case for the --huge-unlink=never mode.
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
EAL malloc layer assumed all free elements content
is filled with zeros ("clean"), as opposed to uninitialized ("dirty").
This assumption was ensured in two ways:
1. EAL memalloc layer always returned clean memory.
2. Freed memory was cleared before returning into the heap.
Clearing the memory can be as slow as around 14 GiB/s.
To save doing so, memalloc layer is allowed to return dirty memory.
Such segments being marked with RTE_MEMSEG_FLAG_DIRTY.
The allocator tracks elements that contain dirty memory
using the new flag in the element header.
When clean memory is requested via rte_zmalloc*()
and the suitable element is dirty, it is cleared on allocation.
When memory is deallocated, the freed element is joined
with adjacent free elements, and the dirty flag is updated:
a) If the joint element contains dirty parts, it is dirty:
dirty + freed + dirty = dirty => no need to clean
freed + dirty = dirty the freed memory
Dirty parts may be large (e.g. initial allocation),
so clearing them could create unpredictable slowdown.
b) If the only dirty part of the joint element
is the freed memory, the joint element can be made clean:
clean + freed + clean = clean => freed memory
clean + freed = clean must be cleared
freed + clean = clean
freed = clean
This logic naturally reproduces the old behavior
and always applies in modes when EAL memalloc layer
returns only clean segments.
As a result, memory is either cleared on free, as before,
or it will be cleared on allocation if need be, but never twice.
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Hugepage mapping is a layer of EAL malloc builds upon.
There were implicit references to its details,
like mentions of segment file descriptors,
but no explicit description of its modes and operation.
Add an overview of mechanics used on ech supported OS.
Convert memory management subsections from list items
to level 4 headers: they are big and important enough.
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
The KNI PMD name should be "net_kni".
Fixes: 75e2bc54c0 ("net/kni: add KNI PMD")
Cc: stable@dpdk.org
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The Kni kthreads seem to be re-scheduled at a granularity of roughly
1 millisecond right now, which seems to be insufficient for performing
tests involving a lot of control plane traffic.
Even if KNI_KTHREAD_RESCHEDULE_INTERVAL is set to 5 microseconds, it
seems that the existing code cannot reschedule at the desired granularily,
due to precision constraints of schedule_timeout_interruptible().
In our use case, we leverage the Linux Kernel for control plane, and
it is not uncommon to have 60K - 100K pps for some signaling protocols.
Since we are not in atomic context, the usleep_range() function seems to be
more appropriate for being able to introduce smaller controlled delays,
in the range of 5-10 microseconds. Upon reading the existing code, it would
seem that this was the original intent. Adding sub-millisecond delays,
seems unfeasible with a call to schedule_timeout_interruptible().
KNI_KTHREAD_RESCHEDULE_INTERVAL 5 /* us */
schedule_timeout_interruptible(
usecs_to_jiffies(KNI_KTHREAD_RESCHEDULE_INTERVAL));
Below, we attempted a brief comparison between the existing implementation,
which uses schedule_timeout_interruptible() and usleep_range().
We attempt to measure the CPU usage, and RTT between two Kni interfaces,
which are created on top of vmxnet3 adapters, connected by a vSwitch.
insmod rte_kni.ko kthread_mode=single carrier=on
schedule_timeout_interruptible(usecs_to_jiffies(5))
kni_single CPU Usage: 2-4 %
[root@localhost ~]# ping 1.1.1.2 -I eth1
PING 1.1.1.2 (1.1.1.2) from 1.1.1.1 eth1: 56(84) bytes of data.
64 bytes from 1.1.1.2: icmp_seq=1 ttl=64 time=2.70 ms
64 bytes from 1.1.1.2: icmp_seq=2 ttl=64 time=1.00 ms
64 bytes from 1.1.1.2: icmp_seq=3 ttl=64 time=1.99 ms
64 bytes from 1.1.1.2: icmp_seq=4 ttl=64 time=0.985 ms
64 bytes from 1.1.1.2: icmp_seq=5 ttl=64 time=1.00 ms
usleep_range(5, 10)
kni_single CPU usage: 50%
64 bytes from 1.1.1.2: icmp_seq=1 ttl=64 time=0.338 ms
64 bytes from 1.1.1.2: icmp_seq=2 ttl=64 time=0.150 ms
64 bytes from 1.1.1.2: icmp_seq=3 ttl=64 time=0.123 ms
64 bytes from 1.1.1.2: icmp_seq=4 ttl=64 time=0.139 ms
64 bytes from 1.1.1.2: icmp_seq=5 ttl=64 time=0.159 ms
usleep_range(20, 50)
kni_single CPU usage: 24%
64 bytes from 1.1.1.2: icmp_seq=1 ttl=64 time=0.202 ms
64 bytes from 1.1.1.2: icmp_seq=2 ttl=64 time=0.170 ms
64 bytes from 1.1.1.2: icmp_seq=3 ttl=64 time=0.171 ms
64 bytes from 1.1.1.2: icmp_seq=4 ttl=64 time=0.248 ms
64 bytes from 1.1.1.2: icmp_seq=5 ttl=64 time=0.185 ms
usleep_range(50, 100)
kni_single CPU usage: 13%
64 bytes from 1.1.1.2: icmp_seq=1 ttl=64 time=0.537 ms
64 bytes from 1.1.1.2: icmp_seq=2 ttl=64 time=0.257 ms
64 bytes from 1.1.1.2: icmp_seq=3 ttl=64 time=0.231 ms
64 bytes from 1.1.1.2: icmp_seq=4 ttl=64 time=0.143 ms
64 bytes from 1.1.1.2: icmp_seq=5 ttl=64 time=0.200 ms
usleep_range(100, 200)
kni_single CPU usage: 7%
64 bytes from 1.1.1.2: icmp_seq=1 ttl=64 time=0.716 ms
64 bytes from 1.1.1.2: icmp_seq=2 ttl=64 time=0.167 ms
64 bytes from 1.1.1.2: icmp_seq=3 ttl=64 time=0.459 ms
64 bytes from 1.1.1.2: icmp_seq=4 ttl=64 time=0.455 ms
64 bytes from 1.1.1.2: icmp_seq=5 ttl=64 time=0.252 ms
usleep_range(1000, 1100)
kni_single CPU usage: 2%
64 bytes from 1.1.1.2: icmp_seq=1 ttl=64 time=2.22 ms
64 bytes from 1.1.1.2: icmp_seq=2 ttl=64 time=1.17 ms
64 bytes from 1.1.1.2: icmp_seq=3 ttl=64 time=1.17 ms
64 bytes from 1.1.1.2: icmp_seq=4 ttl=64 time=1.17 ms
64 bytes from 1.1.1.2: icmp_seq=5 ttl=64 time=1.15 ms
Upon testing, usleep_range(1000, 1100) seems roughly equivalent in
latency and cpu usage to the variant with schedule_timeout_interruptible(),
while usleep_range(100, 200) seems to give a decent tradeoff between
latency and cpu usage, while allowing users to tweak the limits for
improved precision if they have such use cases.
Disabling RTE_KNI_PREEMPT_DEFAULT, interestingly seems to lead to a
softlockup on my kernel.
Kernel panic - not syncing: softlockup: hung tasks
CPU: 0 PID: 1226 Comm: kni_single Tainted: G W O 3.10 #1
<IRQ> [<ffffffff814f84de>] dump_stack+0x19/0x1b
[<ffffffff814f7891>] panic+0xcd/0x1e0
[<ffffffff810993b0>] watchdog_timer_fn+0x160/0x160
[<ffffffff810644b2>] __run_hrtimer.isra.4+0x42/0xd0
[<ffffffff81064b57>] hrtimer_interrupt+0xe7/0x1f0
[<ffffffff8102cd57>] smp_apic_timer_interrupt+0x67/0xa0
[<ffffffff8150321d>] apic_timer_interrupt+0x6d/0x80
This patch also attempts to remove this option.
References:
[1] https://www.kernel.org/doc/Documentation/timers/timers-howto.txt
Signed-off-by: Tudor Cornea <tudor.cornea@gmail.com>
Acked-by: Padraig Connolly <Padraig.J.Connolly@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Starting in meson 0.56, the functions meson.source_root() and
meson.build_root() are deprecated and to be replaced by the [more
descriptive] functions: project_source_root()/global_source_root() and
project_build_root()/global_build_root(). Unfortunately, these new
replacement functions were only added in 0.56 release too, so to use
them we would need version checks for old/new functions to remove the
deprecation warnings.
However, the functions "current_build_dir()" and "current_source_dir()"
remain unaffected by all this, so we can bypass the versioning problem,
by saving off these values to "dpdk_source_root" and "dpdk_build_root"
in the top-level meson.build file
Bugzilla ID: 926
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Jerin Jacob <jerinj@marvell.com>
Users can create the desired number of RxQ and TxQ in DPDK. For
example, if the number of RxQ = 2 and the number of TxQ = 5,
a total of 8 file descriptors will be created for a tap device,
including RxQ, TxQ, and one for keepalive. The RxQ and TxQ
with the same ID are paired by dup(2).
In this scenario, Kernel will have 3 RxQ where packets are
incoming but not read. The reason for this is that there are only
2 RxQ that are polled by DPDK, while there are 5 queues in Kernel.
This patch add a checking if DPDK has appropriate numbers of
queues to avoid unexpected packet drop.
Signed-off-by: Nobuhiro Miki <nmiki@yahoo-corp.jp>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
If hardware supports IEEE 1588 PTP, PTP capability will be set.
Currently, vec and sve burst is unsupported when PTP capability is set.
For sake of Rx/Tx performance, IEEE 1588 PTP is not supported in sve or
vec burst mode. When enabling IEEE 1588 PTP, Rx/Tx burst mode should be
simple or common. Rx/Tx burst mode could be set like this, for example:
-a 0000:35:00.0,rx_func_hint=common,tx_func_hint=common
This patch supports vec and sve burst when PTP is disabled. And only
support simple or common burst When PTP is enabled.
Fixes: 38b539d96e ("net/hns3: support IEEE 1588 PTP")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Adding changes to configure switch header type pre_l2 for cnxk.
pre_l2 headers are custom headers placed before the ethernet
header. Along with switch header type, user needs to provide the
offset within the custom header that holds the size of the
custom header and mask for the size within the size offset.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Reviewed-by: Satheesh Paul <psatheesh@marvell.com>
Provides ethdev callback support of rx_queue_count,
rx_descriptor_status and tx_descriptor_status.
Signed-off-by: Rahul Bhansali <rbhansali@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Recent VIC models can parse GENEVE, including options, and inner
packet headers. Enable GENEVE header and option flow items. Currently,
only the first option that follows the GENEVE header can be matched,
and the GENEVE header item must specify option length.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
This patch adds support for level 2 for QoS shaping.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Old macros kept for backward compatibility, but this cause old macro
usage to sneak in silently.
Marking old macros as deprecated. Downside is this will cause some noise
for applications that are using old macros.
Fixes: 295968d174 ("ethdev: add namespace")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Add missing capability for outer UDP Tx checksum.
Also fixed the feature list in ice_dcf.ini
Fixes: bf89db4409 ("net/ice: complete device info get in DCF")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
This patch adds support to configure channel mask which will
be used by rte flow when adding flow rules on SDP interfaces.
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
This patch introduces new api for retrieving event port id
of eth rx adapter.
Signed-off-by: Naga Harish K S V <s.v.naga.harish.k@intel.com>
Acked-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com>
Add external clock support for cnxk timer adapter.
External clock mapping is as follows:
RTE_EVENT_TIMER_ADAPTER_EXT_CLK0 = TIM_CLK_SRC_10NS,
RTE_EVENT_TIMER_ADAPTER_EXT_CLK1 = TIM_CLK_SRC_GPIO,
RTE_EVENT_TIMER_ADAPTER_EXT_CLK2 = TIM_CLK_SRC_PTP,
RTE_EVENT_TIMER_ADAPTER_EXT_CLK3 = TIM_CLK_SRC_SYNCE,
TIM supports clock input from external GPIO, PTP, SYNCE clocks.
Input resolution is adjusted based on CNTVCT frequency for better
estimation.
Since TIM is unaware of input clock frequency, application is
expected to pass the frequency.
Example:
-a 0002:0e:00.0,tim_eclk_freq=122880000-0-0
The order of frequencies above is GPIO-PTP-SYNCE.
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Number of direct credits, atomic inflight and history list are
updated to DLB2.0 supported sizes. As DLB2.0 does not provide
dev arg to override the default per-queue atomic inflight
allocation, it is removed from the documentation.
Fixes: f3cad285bb ("event/dlb2: add infos get and configure")
Cc: stable@dpdk.org
Signed-off-by: Rashmi Shetty <rashmi.shetty@intel.com>
Reviewed-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Define a set of macros in the build configuration to allow C runtime
code to check the current OS environment. This saves the user having to
use ifdefs for e.g. disabling particular tests on Windows.
See included documentation changes for usage examples.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Standard "find" on BSD does not support the "-printf" so gfind from
findutils package was used to enable full doc builds. We can remove this
extra dependency by using "sed" and "tr" to adjust the output from
regular find instead.
Fixes: 8260f4f98c ("mk: use script to generate examples.dox")
Fixes: 499fe9dfcf ("doc: add dependency on examples for API doxygen")
Fixes: 897e55c8d2 ("doc: fix Doxygen examples build on FreeBSD")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
As per the deprecation notice, In the view of enabling unified driver
for octeontx2(cn9k)/octeontx3(cn10k), removing drivers/octeontx2
drivers and replace with drivers/cnxk/ which
supports both octeontx2(cn9k) and octeontx3(cn10k) SoCs.
This patch does the following
- Replace drivers/common/octeontx2/ with drivers/common/cnxk/
- Replace drivers/mempool/octeontx2/ with drivers/mempool/cnxk/
- Replace drivers/net/octeontx2/ with drivers/net/cnxk/
- Replace drivers/event/octeontx2/ with drivers/event/cnxk/
- Replace drivers/crypto/octeontx2/ with drivers/crypto/cnxk/
- Rename config/arm/arm64_octeontx2_linux_gcc as
config/arm/arm64_cn9k_linux_gcc
- Update the documentation and MAINTAINERS to reflect the same.
- Change the reference to OCTEONTX2 as OCTEON 9. Old release notes and
the kernel related documentation is not accounted for this change.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Ruifeng Wang <ruifeng.wang@arm.com>
update driver to use the REE cnxk code
replace octeontx2/otx2 with cn9k
Signed-off-by: Liron Himi <lironh@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Regular LTS releases have previously aligned to DPDK main branch
releases so that fixes being backported have already gone through
DPDK main branch release validation.
Now that DPDK main branch has moved to 3 releases per year, the LTS
releases should continue to align with it and follow a similar release
cadence.
Update stable docs to reflect this.
Signed-off-by: Kevin Traynor <ktraynor@redhat.com>
When using Python 3.10, this warning appears:
DeprecationWarning: The distutils package is deprecated
and slated for removal in Python 3.12.
Use setuptools or check PEP 632 for potential alternatives
The PEP 632 recommends replacing "distutils.version" with "packaging".
Bugzilla ID: 914
Cc: stable@dpdk.org
Reported-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Tested-by: Jerin Jacob <jerinj@marvell.com>
Start a new release cycle with empty release notes.
Bump version and ABI minor.
Enable ABI checks.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The generic RTE_FLOW_ACTION_TYPE_MODIFY_FIELD action was
introduced by [1]. This action provides an unified way
to perform various arithmetic and transfer operations over
packet network header fields and packet metadata.
[1] 73b68f4c54 ("ethdev: introduce generic modify flow action")
On other side there are a bunch of multiple legacy actions,
that can be superseded by the generic MODIFY_FIELD action:
RTE_FLOW_ACTION_TYPE_OF_SET_MPLS_TTL
RTE_FLOW_ACTION_TYPE_OF_DEC_MPLS_TTL
RTE_FLOW_ACTION_TYPE_OF_SET_NW_TTL
RTE_FLOW_ACTION_TYPE_OF_DEC_NW_TTL sfc
RTE_FLOW_ACTION_TYPE_OF_COPY_TTL_OUT
RTE_FLOW_ACTION_TYPE_OF_COPY_TTL_IN
RTE_FLOW_ACTION_TYPE_SET_IPV4_SRC bnxt, cxgbe, mlx5
RTE_FLOW_ACTION_TYPE_SET_IPV4_DST bnxt, cxgbe, mlx5
RTE_FLOW_ACTION_TYPE_SET_IPV6_SRC cxgbe, mlx5
RTE_FLOW_ACTION_TYPE_SET_IPV6_DST cxgbe, mlx5
RTE_FLOW_ACTION_TYPE_SET_TP_SRC cxgbe, mlx5
RTE_FLOW_ACTION_TYPE_SET_TP_DST cxgbe, mlx5
RTE_FLOW_ACTION_TYPE_DEC_TTL mlx5, sfc
RTE_FLOW_ACTION_TYPE_SET_TTL mlx5
RTE_FLOW_ACTION_TYPE_SET_MAC_SRC cxgbe, mlx5
RTE_FLOW_ACTION_TYPE_SET_MAC_DST cxgbe, mlx5
RTE_FLOW_ACTION_TYPE_INC_TCP_SEQ mlx5
RTE_FLOW_ACTION_TYPE_DEC_TCP_SEQ mlx5
RTE_FLOW_ACTION_TYPE_INC_TCP_ACK mlx5
RTE_FLOW_ACTION_TYPE_DEC_TCP_ACK mlx5
RTE_FLOW_ACTION_TYPE_SET_IPV4_DSCP mlx5
RTE_FLOW_ACTION_TYPE_SET_IPV6_DSCP mlx5
RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_VID bnxt, cnxk, cxgbe, enic,
mlx5, octeontx2, sfc
RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_PCP bnxt, cnxk, cxgbe, enic,
mlx5, octeontx2, sfc
RTE_FLOW_ACTION_TYPE_SET_TAG mlx5
RTE_FLOW_ACTION_TYPE_SET_META mlx5
This note deprecates the following RTE Flow actions,
as not supported by any of PMDs:
RTE_FLOW_ACTION_TYPE_OF_SET_MPLS_TTL
RTE_FLOW_ACTION_TYPE_OF_DEC_MPLS_TTL
RTE_FLOW_ACTION_TYPE_OF_SET_NW_TTL
RTE_FLOW_ACTION_TYPE_OF_COPY_TTL_OUT
RTE_FLOW_ACTION_TYPE_OF_COPY_TTL_IN
The following actions are supposed to be deprecated in 22.07
and replaced by generic field modify action:
RTE_FLOW_ACTION_TYPE_OF_DEC_NW_TTL
RTE_FLOW_ACTION_TYPE_SET_IPV4_SRC
RTE_FLOW_ACTION_TYPE_SET_IPV4_DST
RTE_FLOW_ACTION_TYPE_SET_IPV6_SRC
RTE_FLOW_ACTION_TYPE_SET_IPV6_DST
RTE_FLOW_ACTION_TYPE_SET_TP_SRC
RTE_FLOW_ACTION_TYPE_SET_TP_DST
RTE_FLOW_ACTION_TYPE_DEC_TTL
RTE_FLOW_ACTION_TYPE_SET_TTL
RTE_FLOW_ACTION_TYPE_SET_MAC_SRC
RTE_FLOW_ACTION_TYPE_SET_MAC_DST
RTE_FLOW_ACTION_TYPE_INC_TCP_SEQ
RTE_FLOW_ACTION_TYPE_DEC_TCP_SEQ
RTE_FLOW_ACTION_TYPE_INC_TCP_ACK
RTE_FLOW_ACTION_TYPE_DEC_TCP_ACK
RTE_FLOW_ACTION_TYPE_SET_IPV4_DSCP
RTE_FLOW_ACTION_TYPE_SET_IPV6_DSCP
RTE_FLOW_ACTION_TYPE_SET_TAG
RTE_FLOW_ACTION_TYPE_SET_META
The VLAN set actions are interrelated to VLAN header insertion/removal
and supported by multiple PMDs and widely used by applications and
not supposed to be deprecated due to potential large impact on
drivers and applications.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The testing guide is now updated to include details about
using sub-testsuites.
Some example code is given to demonstrate how they can be used.
A note is also added to highlight the need for using vdev EAL args
when running cryptodev tests.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
The DPDK testing infrastructure includes a comprehensive set of
libraries, utilities, and CI integrations for developers to test
their code changes. This isn't well documented, however.
Document the basics for adding a test suite to the infrastructure
and enabling that test suite for continuous integration platforms
so that newer developers can understand how to develop test suites
and test cases.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Ciara Power <ciara.power@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Patch adds feature matrices for event dev, Rx/Tx, Crypto
and Timer adapters.
Along with, .ini files are added for all supported PMDs.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Currently, programmer's guide for the RIB and FIB libraries are missing.
This commit adds them.
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
Change from "how many segments each segment can have" to
"how many segments each segment list can have".
Fixes: b317393283 ("doc: update guides for memory subsystem")
Cc: stable@dpdk.org
Signed-off-by: Kefu Chai <tchaikov@gmail.com>
Update the docs to reflect the two new variables, cpu_instruction_set
for non-arm builds and platform for arm builds.
Fixes: bf66003b51 ("build: use platform for generic and native builds")
Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
Added a diagram to document meter library components
and added text for steps performed by the application to
configure the traffic meter and policing library.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
When using PMD Power Management, scale mode reacts slower than
monitor mode and pause mode. Add note in user guide to this
effect.
Signed-off-by: David Hunt <david.hunt@intel.com>
The doc's contain references to pmd but the proper use is to use PMD.
Cc: stable@dpdk.org
Signed-off-by: Sean Morrissey <sean.morrissey@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Removing the use of driver following PMD as its unnecessary.
Cc: stable@dpdk.org
Signed-off-by: Sean Morrissey <sean.morrissey@intel.com>
Signed-off-by: Conor Fogarty <conor.fogarty@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Since we allow line lengths of up to 100, and the CI checkpatches job
only check for that amount, the rest of our tooling and docs should
reflect this reality. Therefore we can:
* adjust the editorconfig to use that value, to save editors (e.g. vim)
from automatically wrapping lines at 80 characters when typing.
[Since python checkers all seem to expect 79 character lines max, add
for python only a 79-char max line length.]
* change the default line length setting in checkpatches script to 100
so as it matches CI and pre-merge checks.
* update the docs to clarify that while 80 chars is recommended, up to
100 characters is acceptable.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
Acked-by: Chengwen Feng <fengchengwen@huawei.com>
Acked-by: Conor Walsh <conor.walsh@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The problem is solved using Rx metadata delivery negotiation API [1].
[1] commit f6d8a6d3fa ("ethdev: negotiate delivery of packet metadata from HW to PMD")
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
ENAv2 device requires write combining support which isn't supported by
the upstream vfio-pci. amzn-driver repository provided non-upstream
patch to enable this feature and it was linked directly by the ENA PMD
guide.
To avoid custom kernel patch linking, the user is now guided to the AWS
ENA PMD documentation, which describes vfio-pci and ENAv2 issue more
deeply with possible workarounds on how to resolve it.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Update the software dependency link because of website shutdown.
Netcope Technologies was recently renamed to Magmio and no longer
provides packages and support for the FPGA cards and NDK platform.
However the project Liberouter@CESNET continues with the maintenance
of Network Development Kit and cooperates on the development of high
speed network FPGA cards as well.
Signed-off-by: Martin Spinler <spinler@cesnet.cz>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Some duplicate words were detected with a script.
Fixes: fdec9301f5 ("doc: add flow classify guides")
Fixes: 4dc6d8e63c ("doc: add graph library guide")
Fixes: 30d3aa861d ("doc: rework VM power manager user guide")
Fixes: 0d547ed037 ("examples/ipsec-secgw: support configuration file")
Fixes: e64833f227 ("examples/l2fwd-keepalive: add sample application")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
In the view of enabling unified driver for octeontx2(cn9k)/
octeontx3(cn10k), removing drivers/octeontx2 drivers and
replace with drivers/cnxk/ which supports both octeontx2(cn9k)
and octeontx3(cn10k) SoCs.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Add tested Intel platforms with Intel NICs to v21.11 release note.
Signed-off-by: Yan Xia <yanx.xia@intel.com>
Acked-by: Xueqin Lin <xueqin.lin@intel.com>
examples.dox is built inside builddir/doc/api and so doxygen generates
some dir_HASH.html that includes the builddir name and this may prevent
DPDK documentation to be correctly generated in some distributions, for
example CentOS Stream 9 and RHEL9, since the builddir includes the
architecture.
This commit adds builddir/doc/api (the path where examples.dox is
generated) to STRIP_FROM_PATH, so the generated documentation doesn't
change if builddir changes.
Fixes: a6090630f4 ("doc: automate examples file list for API")
Cc: stable@dpdk.org
Signed-off-by: Timothy Redaelli <tredaelli@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Tested-by: David Marchand <david.marchand@redhat.com>
To enable bifurcated device support, rtnl_lock is released before calling
userspace callbacks and asynchronous requests are enabled.
But these changes caused more issues, like bug #809, #816. To reduce the
scope of the problems, the bifurcated device support related changes are
only enabled when it is requested explicitly with new 'enable_bifurcated'
module parameter.
And bifurcated device support is disabled by default.
So the bifurcated device related problems are isolated and they can be
fixed without impacting all use cases.
Bugzilla ID: 816
Fixes: 631217c761 ("kni: fix kernel deadlock with bifurcated device")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Igor Ryzhov <iryzhov@nfware.com>
Updated AESNI MB and AESNI GCM, KASUMI, ZUC and SNOW3G PMD documentation
guides with information about the latest Intel IPSec Multi-buffer
library supported.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
This library can be made optional.
drivers/gpu and app/test-gpudev depend on this library,
so they are automatically disabled if the lib is disabled.
Signed-off-by: Elena Agostini <eagostini@nvidia.com>
Users are confused with a feature with "P", added necessary
explanation for this.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
These edits affect the outermost header in the current processing state
of the packet, which might have been decapsulated by prior action DECAP.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
DMA on SN1022 SoC requires extra mapping of the memory via MCDI.
Signed-off-by: Viacheslav Galaktionov <viacheslav.galaktionov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
The current approach detects the proxy port on each port (re-)plug and
may spam the log with error messages if the PMD does not support flows.
As testpmd is a debug tool, it must not do such implicit port handling.
Instead, the new API should be called only when the user requests that.
Revoke the existing code. Implement an explicit command-line primitive
to let the user find the proxy port themselves. Provide relevant hints.
Fixes: 1179f05cc9 ("ethdev: query proxy port to manage transfer flows")
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Currently the vector and simple xmit algorithm don't support multi_segs,
so if Tx offload support MBUF_FAST_FREE, driver could invoke
rte_mempool_put_bulk() to free Tx mbufs in this situation.
In the testpmd single core MAC forwarding scenario, the performance is
improved by 8% at 64B on Kunpeng920 platform.
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
The ice DCF device reset has been supported. Release notes is updated
to synchronize with the feature.
Fixes: 1a86f4dbdf ("net/ice: support DCF device reset")
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
On FreeBSD, "find" does not support the "printf" flag, so we need to
use "gfind" from the "findutils" package.
Fixes: 8260f4f98c ("mk: use script to generate examples.dox")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Update public macros to have RTE_IP_FRAG_ prefix.
Update DPDK components to use new names.
Keep obsolete macro for compatibility reasons.
Renamed experimental function ``rte_frag_table_del_expired_entries``to
``rte_ip_frag_table_del_expired_entries`` to comply with other public
API naming convention.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Meson 0.58 and above cannot build DPDK on Windows with clang.
Recommend the latest known working version
and warn about the issue and the affected versions.
Suggested-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
This is the CUDA implementation of the gpudev library.
Functionalities implemented through CUDA Driver API are:
- Device probe and remove
- Manage device memory allocations
- Register/unregister external CPU memory in the device memory area
Signed-off-by: Elena Agostini <eagostini@nvidia.com>
The 'IPv4' in the comment is to mark the code snippet, while it made
some confusion. Then removing 'IPv4' description will be clearer.
Fixes: 9a212dc06c ("doc: use code snippets in sample app guides")
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
Starting from FW version xx.32.0108. version, the BlueField 2 and
ConnectX-6 Dx adapters support crypto operations.
Add them to the supported PCI devices list.
Signed-off-by: Raja Zidane <rzidane@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Tal Shnaiderman <talshn@nvidia.com>
Replace RTE_EVENT_DEV_CAP_REQUIRES_MAINT, which signaled the need
for the application to call rte_event_maintain(), with
RTE_EVENT_DEV_CAP_MAINTENANCE_FREE, which does the opposite (i.e.,
signifies that the event device does not require maintenance).
This approach is more in line with how other eventdev hardware and/or
software limitations are handled in the Eventdev API.
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
The --meter section used wrong indentation previously.
Fixes: 6a2cf58a04 ("app/flow-perf: support meter action")
Cc: stable@dpdk.org
Signed-off-by: Rongwei Liu <rongweil@nvidia.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
The flow perf application uses the srtcm_rfc2697 as meter profile
while doing the meter testing.
This patch adds new configuration parameter '--packet-mode' to
generate the meter flows with packet cir instead of byte cir.
Signed-off-by: Rongwei Liu <rongweil@nvidia.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
Change meter-cir option to meter-profile to cover user input for CIR,
CBS & EBS values.
The usage is as below:
--meter-profile=N1,N2,N3 default value is 1250000 156250 0.
Signed-off-by: Rongwei Liu <rongweil@nvidia.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
Add option "policy-mtr" to indicate if meter creation will include policy
or not. Meter creation will keep unchanged without it.
With "policy-mtr", the policy is introduced. API create_meter_policy
is to create a policy. API create_meter_rule will use it to create
a meter. The value of it is used to specify meter policy actions.
Signed-off-by: Haifei Luo <haifeil@nvidia.com>
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Signed-off-by: Rongwei Liu <rongweil@nvidia.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
Add support for Address Sanitizer (ASan) for PPC/POWER architecture.
Signed-off-by: David Christensen <drc@linux.vnet.ibm.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
The l3fwd example should use the reserved IPv4/v6 reserved address
ranges defined in RFC5735, RFC5180 and RFC863 discard protocol for
the port number in the exact match mode of L3 forwarding.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Increase the number of routes from 8 to 16 that are statically added for
lpm and em mode as most of the SoCs support more than 8 interfaces.
The number of routes added is equal to the number of ethernet devices
ports enabled through port mask.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Remove the szedata2 device driver as the platform is no longer
supported.
Signed-off-by: Martin Spinler <spinler@cesnet.cz>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The ConnectX NIC series hardware provides only 63-bit
wide timestamps. The imposed limitations description
added to documentation.
At the moment there are no affected applications known
or bug reports neither, this is just the declaration
of limitation.
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
This patch defines ASAN_SHADOW_OFFSET for arm64 according to the ASan
documentation. This offset should cover all arm64 VMAs supported by
ASan.
Signed-off-by: Volodymyr Fialko <vfialko@marvell.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Ruifeng Wang <ruifeng.wang@arm.com>
The DPAA DMA driver is an implementation of the dmadev APIs,
that provide means to initiate a DMA transaction from CPU.
The initiated DMA is performed without CPU being involved
in the actual DMA transaction. This is achieved via using
the QDMA controller of DPAA SoC.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Increase default value for config parameter RTE_LIBRTE_IP_FRAG_MAX_FRAG
from 4 to 8. This parameter controls maximum number of fragments per
packet in ip reassembly table. Increasing this value from 4 to 8 will
allow users to cover common case with jumbo packet size of 9KB and
fragments with default frame size (1500B).
As RTE_LIBRTE_IP_FRAG_MAX_FRAG is used in definition of public
structure (struct rte_ip_frag_death_row), this is an ABI change.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
These actions map to MAE action DECR_IP_TTL. It affects
the outermost header in the current processing state of
the packet, which might have been decapsulated by prior
action DECAP. It also updates IPv4 checksum accordingly.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
In heterogeneous computing system, processing is not only in the CPU.
Some tasks can be delegated to devices working in parallel.
When mixing network activity with task processing there may be the need
to put in communication the CPU with the device in order to synchronize
operations.
An example could be a receive-and-process application
where CPU is responsible for receiving packets in multiple mbufs
and the GPU is responsible for processing the content of those packets.
The purpose of this list is to provide a buffer in CPU memory visible
from the GPU that can be treated as a circular buffer
to let the CPU provide fondamental info of received packets to the GPU.
A possible use-case is described below.
CPU:
- Trigger some task on the GPU
- in a loop:
- receive a number of packets
- provide packets info to the GPU
GPU:
- Do some pre-processing
- Wait to receive a new set of packet to be processed
Layout of a communication list would be:
-------
| 0 | => pkt_list
| status |
| #pkts |
-------
| 1 | => pkt_list
| status |
| #pkts |
-------
| 2 | => pkt_list
| status |
| #pkts |
-------
| .... | => pkt_list
-------
Signed-off-by: Elena Agostini <eagostini@nvidia.com>
In heterogeneous computing system, processing is not only in the CPU.
Some tasks can be delegated to devices working in parallel.
When mixing network activity with task processing there may be the need
to put in communication the CPU with the device in order to synchronize
operations.
The purpose of this flag is to allow the CPU and the GPU to
exchange ACKs. A possible use-case is described below.
CPU:
- Trigger some task on the GPU
- Prepare some data
- Signal to the GPU the data is ready updating the communication flag
GPU:
- Do some pre-processing
- Wait for more data from the CPU polling on the communication flag
- Consume the data prepared by the CPU
Signed-off-by: Elena Agostini <eagostini@nvidia.com>
Add a function for the application to ensure the coherency
of the writes executed by another device into the GPU memory.
Signed-off-by: Elena Agostini <eagostini@nvidia.com>
In heterogeneous computing system, processing is not only in the CPU.
Some tasks can be delegated to devices working in parallel.
Such workload distribution can be achieved by sharing some memory.
As a first step, the features are focused on memory management.
A function allows to allocate memory inside the device,
or in the main (CPU) memory while making it visible for the device.
This memory may be used to save packets or for synchronization data.
The next step should focus on GPU processing task control.
Signed-off-by: Elena Agostini <eagostini@nvidia.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The computing device may operate in some isolated contexts.
Memory and processing are isolated in a silo represented by
a child device.
The context is provided as an opaque by the caller of
rte_gpu_add_child().
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
In heterogeneous computing system, processing is not only in the CPU.
Some tasks can be delegated to devices working in parallel.
The new library gpudev is for dealing with GPGPU computing devices
from a DPDK application running on the CPU.
The infrastructure is prepared to welcome drivers in drivers/gpu/.
Signed-off-by: Elena Agostini <eagostini@nvidia.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Added support to create flows with priority attribute set
randomly between 0 and a user supplied maximum value. This
is useful to measure performance on NICs which may have to
rearrange flows to honor flow priority.
Removed the lower limit of 100000 flows per batch.
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
This patch add dmadev instances create during the PCI probe, and
destroy them during the PCI remove. Internal structures and HW
definitions was also included.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Add the basic device probe and remove functions and initial
documentation for new hisilicon DMA drivers.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
The delay drop is the common feature managed on per device basis
and the kernel driver is responsible one for the initialization and
rearming.
By default, the timeout value is set to activate the delay drop when
the driver is loaded.
A private flag "dropless_rq" is used to control the rearming. Only
when it is on, the rearming will be handled once received a timeout
event. Or else, the delay drop will be deactivated after the first
timeout occurs and all the Rx queues won't have this feature.
The PMD is trying to query this flag and warn the application when
some queues are created with delay drop but the flag is off.
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
For the Ethernet RQs, if there all receiving descriptors are
exhausted, the packets being received will be dropped. This behavior
prevents slow or malicious software entities at the host from
affecting the network. While for hairpin cases, even if there is no
software involved during the packet forwarding from Rx to Tx side,
some hiccup in the hardware or back pressure from Tx side may still
cause the descriptors to be exhausted. In certain scenarios it may be
preferred to configure the device to avoid such packet drops,
assuming the posting of descriptors will resume shortly.
To support this, a new devarg "delay_drop" is introduced. By default,
the delay drop is enabled for hairpin Rx queues and disabled for
standard Rx queues. This value is used as a bit mask:
- bit 0: enablement of standard Rx queue
- bit 1: enablement of hairpin Rx queue
And this attribute will be applied to all Rx queues of a device.
The "rq_delay_drop" capability in the HCA_CAP is checked before
creating any queue. If the hardware capabilities do not support
this delay drop, all the Rx queues will still be created without
this attribute, and the devarg setting will be ignored even if it
is specified explicitly. A warning log is used to notify the
application when this occurs.
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Set the 'present' parameter to 0 by default. It is configured by hardware,
users can set it to 1 for manual configuration.
Fixes: f611dada1a ("net/txgbe: update link setup process of backplane NICs")
Cc: stable@dpdk.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
This patch introduces shared RxQ. All shared Rx queues with same group
and queue ID share the same rxq_ctrl. Rxq_ctrl and rxq_data are shared,
all queues from different member port share same WQ and CQ, essentially
one Rx WQ, mbufs are filled into this singleton WQ.
Shared rxq_data is set into device Rx queues of all member ports as
RxQ object, used for receiving packets. Polling queue of any member
ports returns packets of any member, mbuf->port is used to identify
source port.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Implement set/get_sram_policy which support both Rx/Tx
direction truflow type the specific SRAM bank.
Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Farah Smith <farah.smith@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The accumulation of flow counters is not determined by the application
device arguments anymore. Instead it is now dictated by the platform
capabilities whether to do software based accumulation or not.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This change allows adding IP header matches for GRE flows that
does not specify outer IP header in the flow match pattern.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Enabled wildcard match support for IPv4 ingress flows.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Added support for socket redirect feature capability so applications
can enable or disable this feature. This patch contains the template
changes.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Update driver to read the multi root capability and ignore
PCI address check while creating ulp session when multi root
capability is enabled in the hardware. DPDK HSI version updated
from 1.10.2.44 to 1.10.2.68.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
* Added support for NAT action for destination IP and port
combination for Thor devices.
* Consolidated the encapsulation and NAT entries for scaling flows
with NAT actions.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Shahaji Bhosle <sbhosle@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add support for unicast and broadcast MAC filter configuration.
Signed-off-by: Vijay Kumar Srivastava <vsrivast@xilinx.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add new vDPA PMD to support vDPA operations of Xilinx devices.
This patch implements probe and remove functions.
Signed-off-by: Vijay Kumar Srivastava <vsrivast@xilinx.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Set the RTE_EVENT_DEV_CAP_REQUIRES_MAINT flag, and perform DSW
background tasks on rte_event_maintain() calls.
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Tested-by: Richard Eklycke <richard.eklycke@ericsson.com>
Tested-by: Liron Himi <lironh@marvell.com>
This patch adds new api ``rte_event_eth_rx_adapter_queue_stats_get`` to
retrieve queue stats. The queue stats are in the format
``struct rte_event_eth_rx_adapter_queue_stats``.
For resetting the queue stats,
``rte_event_eth_rx_adapter_queue_stats_reset`` api is added.
The adapter stats_get and stats_reset apis are also updated to
handle queue level event buffer use case.
Signed-off-by: Naga Harish K S V <s.v.naga.harish.k@intel.com>
Acked-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com>
Added table to the crypto device drivers documentation
stating the support of each PMD on Linux, FreeBSD and Windows.
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add 1MB data-unit length to the capability's bitmap.
Handle 1MB data-unit length in the mlx5 session create operation,
and expose its capability in the mlx5 capabilities.
Signed-off-by: Raja Zidane <rzidane@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Adds event vector support to inline protocol offload mode.
By default vector support is disabled, it can be enabled by
using the option --event-vector.
Additional options to configure vector size and vector timeout are
also implemented and can be used by specifying --vector-size and
--vector-tmo.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
New option added to the SA configuration arguments that
allows setting an arbitrary start value for ESN.
For example in the SA below ESN will be enabled and first egress
IPsec packet will have the ESN value 10000:
sa out 15 cipher_algo null auth_algo null mode ipv4-tunnel \
src 172.16.1.5 dst 172.16.2.5 \
esn 10000
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add telemetry support to the IPsec GW sample app and add
support for per SA telemetry when using IPsec library.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Enable UDP encapsulation for both transport and tunnel modes for the
inline crypto offload path.
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add null auth support with lookaside IPsec on cn10k crypto PMDs.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add support to allow user to specific MSS for TCP TSO offload on a per SA
basis. MSS configuration in the context of IPsec is only supported for
outbound SA's in the context of an inline IPsec Crypto offload.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add support for transmit segmentation offload to inline crypto processing
mode. This offload is not supported by other offload modes, as at a
minimum it requires inline crypto for IPsec to be supported on the
network interface.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Currently, the compression block size is 15 by default, which
is the maximum.
Add "log-block-size" devarg to select compression block size manually.
The value provided should be between 4 to 15.
Any out-of-range value will be defaulted to 15.
Signed-off-by: Raja Zidane <rzidane@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Add support for mlx5 crypto pmd on Windows OS.
Add changes to release note and PMD guide.
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
The cryptodev library now registers commands with telemetry, and
implements the corresponding callback functions. These commands
allow a list of cryptodevs to be queried, as well as info and stats
for the corresponding cryptodev.
An example usage can be seen below:
Connecting to /var/run/dpdk/rte/dpdk_telemetry.v2
{"version": "DPDK 21.11.0-rc0", "pid": 1135019, "max_output_len": 16384}
--> /
{"/": ["/", "/cryptodev/info", "/cryptodev/list", "/cryptodev/stats", ...]}
--> /cryptodev/list
{"/cryptodev/list": [0,1,2,3]}
--> /cryptodev/info,0
{"/cryptodev/info": {"device_name": "0000:1c:01.0_qat_sym", \
"max_nb_queue_pairs": 2}}
--> /cryptodev/stats,0
{"/cryptodev/stats": {"enqueued_count": 0, "dequeued_count": 0, \
"enqueue_err_count": 0, "dequeue_err_count": 0}}
Signed-off-by: Rebecca Troy <rebecca.troy@intel.com>
Acked-by: Ciara Power <ciara.power@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Deprecation notice targeted for 21.11 has been committed with
following as the first commit of the series.
Fixes: b7c9842916 ("interrupts: add allocator and accessors")
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>
MAE counters can be polled from a control thread if no service core is
allocated for this.
Signed-off-by: Viacheslav Galaktionov <viacheslav.galaktionov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Flex item or flex parser is port infrastructure that allows
application to add support for a custom network header and
offload flows to match the header elements.
Flex item API adds FLEX flow item to RTE flows.
Fixes: dc4d860e8a ("ethdev: introduce configurable flexible item")
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add the device and vendor numbers to the PCI ID map so
that a VF can be probed.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
The GTP, GTP-U, GTP-C header fields can be matched, however NIC does not
support GTP tunneling so no items after the GTP header can be specified.
If a GTP-U or GTP-C item is specified without a preceding UDP item, the
UDP destination port is implicitly matched. For GTP, the destination UDP
port must be specified but its value is not enforced.
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Hyong Youb Kim <hyonkim@cisco.com>
Enable protocol agnostic flow offloading to support raw pattern input
for RSS hash flow rule creation. It is based on Parser Library feature.
Current rte_flow raw API is utilized.
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add BPHY to the list of platform hardware accelerator blocks.
Fixes: 3d27e49e07 ("raw/cnxk_bphy: add BPHY CGX/RPM skeleton driver")
Cc: stable@dpdk.org
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Device naming might be misleading which is especially true if one takes
it from lspci output. In order to keep naming consistent keep leading
zero in front of pci bus number.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jakub Palider <jpalider@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
As previously announced, this patch renames struct
vhost_device_ops to struct rte_vhost_device_ops.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Ten vhost APIs were announced to be stable and promoted in below
commit, so remove the related deprecation notice.
Fixes: 945ef8a040 ("vhost: promote some APIs to stable")
Reported-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Signed-off-by: Chenbo Xia <chenbo.xia@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch marks the vDPA driver APIs as internal and
rename the corresponding header file to vdpa_driver.h.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Protocol agnostic flow offloading in Flow Director is enabled by this
patch based on the Parser Library, using existing rte_flow raw API.
Note that the raw flow requires:
1. byte string of raw target packet bits.
2. byte string of mask of target packet.
Here is an example:
FDIR matching ipv4 dst addr with 1.2.3.4 and redirect to queue 3:
flow create 0 ingress pattern raw \
pattern spec \
00000000000000000000000008004500001400004000401000000000000001020304 \
pattern mask \
000000000000000000000000000000000000000000000000000000000000ffffffff \
/ end actions queue index 3 / mark id 3 / end
Note that mask of some key bits (e.g., 0x0800 to indicate ipv4 proto)
is optional in our cases. To avoid redundancy, we just omit the mask
of 0x0800 (with 0xFFFF) in the mask byte string example. The prefix
'0x' for the spec and mask byte (hex) strings are also omitted here.
Also update the ice feature list with rte_flow item raw.
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add support for actions PORT_REPRESENTOR and REPRESENTED_PORT.
The former should be used instead of ambiguous PORT_ID.
The latter sends traffic to the entity represented by
the given ethdev (network port or VF).
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Add support for item REPRESENTED_PORT to match on traffic entering
the embedded switch from the entity represented by the given
ethdev (network port or VF).
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
rte_flow_action_handle_create() did not mention what happens
with an indirect action when a device is stopped and started again.
It is natural for some indirect actions, like counter, to be persistent.
Keeping others at least saves application time and complexity.
However, not all PMDs can support it, or the support may be limited
by particular action kinds, that is, combinations of action type
and the value of the transfer bit in its configuration.
Add a device capability to indicate if at least some indirect actions
are kept across the above sequence. Without this capability the behavior
is still unspecified, and application is required to destroy
the indirect actions before stopping the device.
In the future, indirect actions may not be the only type of objects
shared between flow rules. The capability bit intends to cover all
possible types of such objects, hence its name.
Declare that the application can test for the persistence
of a particular indirect action kind by attempting to create
an indirect action of that kind when the device is stopped
and checking for the specific error type.
This is logical because if the PMD can to create an indirect action
when the device is not started and use it after the start happens,
it is natural that it can move its internal flow shared object
to the same state when the device is stopped and restore the state
when the device is started.
Indirect action persistence across a reconfigurations is not required.
In case a PMD cannot keep the indirect actions across reconfiguration,
it is allowed just to report an error.
Application must then flush the indirect actions before attempting it.
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Previously, it was not specified what happens to the flow rules
when the device is stopped, possibly reconfigured, then started.
If flow rules were kept, it could be convenient for application
developers, because they wouldn't need to save and restore them.
However, due to the number of flows and possible creation rate it is
impractical to save all flow rules in DPDK layer. This means that flow
rules persistence really depends on whether PMD and HW can implement it
efficiently. It can also be limited by the rule item and action types,
and its attributes transfer bit (a combination of an item/action type
and a value of the transfer bit is called a rule feature).
Add a device capability bit for PMDs that can keep at least some
of the flow rules across restart. Without this capability behavior
is still unspecified and it is declared that the application must
flush the rules before stopping the device.
Allow the application to test for persistence of rules using
a particular feature by attempting to create a flow rule
using that feature when the device is stopped
and checking for the specific error.
This is logical because if the PMD can to create the flow rule
when the device is not started and use it after the start happens,
it is natural that it can move its internal flow rule object
to the same state when the device is stopped and restore the state
when the device is started.
Rule persistence across a reconfigurations is not required,
because tracking all the rules and configuration-dependent resources
they use may be infeasible. In case a PMD cannot keep the rules
across reconfiguration, it is allowed just to report an error.
Application must then flush the rules before attempting it.
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
A meter policy with RSS/Queue action is not supported
when dv_xmeta_en enabled.
When dv_xmeta_en enabled in legacy creating flow,
it will split into two flows
(one set_tag with jump flow and one RSS/queue action flow).
For meter policy as termination table,
it cannot split flow and
cannot support when dv_xmeta_en enabled.
Fixes: 51ec04dc7b ("net/mlx5: connect meter policy to created flows")
Cc: stable@dpdk.org
Signed-off-by: Li Zhang <lizh@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Add MAC addresses to filter incoming packets, support to set
multicast addresses to filter. And support to set unicast table array.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
According to current semantics of power monitor, this commit adds a
callback function to decide whether aborts the sleep by checking
current value against the expected value and vhost_get_monitor_addr
to provide address to monitor. When no packet come in, the value of
address will not be changed and the running core will sleep. Once
packets arrive, the value of address will be changed and the running
core will wakeup.
Signed-off-by: Miao Li <miao.li@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
This commit defines rte_vhost_power_monitor_cond which is used to pass
some information to vhost driver. The information is including the
address to monitor, the expected value, the mask to extract value read
from 'addr', the value size of monitor address, the match flag used to
distinguish the value used to match something or not match something.
Vhost driver can use these information to fill rte_power_monitor_cond.
Signed-off-by: Miao Li <miao.li@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
According to current semantics of power monitor, this commit adds a
callback function to decide whether aborts the sleep by checking
current value against the expected value and virtio_get_monitor_addr
to provide address to monitor. When no packet come in, the value of
address will not be changed and the running core will sleep. Once
packets arrive, the value of address will be changed and the running
core will wakeup.
Signed-off-by: Miao Li <miao.li@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
Provide the capability to update the hash key, hash types
and RETA table on the fly (without needing to stop/start
the device). However, the key length and the number of RETA
entries are fixed to 40B and 128 entries respectively. This
is done in order to simplify the design, but may be
revisited later as the Virtio spec provides this
flexibility.
Note that only VIRTIO_NET_F_RSS support is implemented,
VIRTIO_NET_F_HASH_REPORT, which would enable reporting the
packet RSS hash calculated by the device into mbuf.rss, is
not yet supported.
Regarding the default RSS configuration, it has been
chosen to use the default Intel ixgbe key as default key,
and default RETA is a simple modulo between the hash and
the number of Rx queues.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
host-based-truflow devarg is not used anymore to enable host based
flow table management functionality TruFlow. Instead this feature is
now driven by a capability indicated by the firmware.
TruFlow is not in tech preview anymore. Update the doc accordingly.
Fixes: da3731e2ea ("net/bnxt: check FW capability to support TRUFLOW")
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Support for runtime Rx/Tx queue setup and inner RSS is not updated.
Update feature matrix for bnxt PMD.
Fixes: 7ed45b1a7c ("net/bnxt: support RSS hash selection")
Fixes: 0105ea1296 ("net/bnxt: support runtime queue setup")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add support for inline crypto for IPsec, for ESP transport and
tunnel over IPv4 and IPv6, as well as supporting the offload for
ESP over UDP, and in conjunction with TSO for UDP and TCP flows.
Implement support for rte_security packet metadata
Add definition for IPsec descriptors, extend support for offload
in data and context descriptor to support
Add support to virtual channel mailbox for IPsec Crypto request
operations. IPsec Crypto requests receive an initial acknowledgment
from physical function driver of receipt of request and then an
asynchronous response with success/failure of request including any
response data.
Add enhanced descriptor debugging
Refactor of scalar tx burst function to support integration of offload
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Reviewed-by: Jingjing Wu <jingjing.wu@intel.com>
In socket direct mode, it's possible to bind any two (maybe four
in future) PCIe devices with IDs like xxxx:xx:xx.x and
yyyy:yy:yy.y. Bonding member interfaces are unnecessary to have
the same PCIe domain/bus/device ID anymore,
Kernel driver uses "system_image_guid" to identify if devices can
be bound together or not. Sysfs "phys_switch_id" is used to get
"system_image_guid" of each network interface.
OFED 5.4+ is required to support "phys_switch_id".
Signed-off-by: Rongwei Liu <rongweil@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Add optional destination ports parameter for port-id action.
The parameter is not must, and the value is 1 by default as before
if the parameter not provided.
For example:
$ dpdk-test-flow-perf -w 08:00.0,representor=[0,1] -- --transfer \
--ingress --transfer --ether --portmask=0x2 --vxlan-encap \
--port-id=0
This command means the rule created on representor 0 with port 0
as destination, since the portmask is 0x2 and dst-ports is 0:
$ dpdk-test-flow-perf -w 08:00.0,representor=[0,1] \
-w 08:00.1,representor=[0,1]-- --transfer --ingress --transfer \
--ether --portmask=0x12 --vxlan-encap --port-id=0,3
This command means the rules created on both representor 0 of PF 0
and PF 1, the destination port for the first representor is PF 0,
and the destination port for the other one is PF 1.
Signed-off-by: Sean Zhang <xiazhang@nvidia.com>
Reviewed-by: Wisam Jaddo <wisamm@nvidia.com>
Implement PIE based congestion management based on rfc8033.
The Proportional Integral Controller Enhanced (PIE) algorithm works
by proactively dropping packets randomly.
PIE is implemented as more advanced queue management is required to
address the bufferbloat problem and provide desirable quality of
service to users.
Tests for PIE code added to test application.
Added PIE related information to documentation.
Signed-off-by: Wojciech Liguzinski <wojciechx.liguzinski@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Jasvinder Singh <jasvinder.singh@intel.com>
This patch adds a new parameter to the FIB configuration to specify
the size of the extension for internal RIB structure.
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Tested-by: Conor Walsh <conor.walsh@intel.com>
This patch adds a bulk version for the Toeplitz hash implemented
with Galios Fields New Instructions (GFNI).
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch add a new Toeplitz hash implementation using
Galios Fields New Instructions (GFNI).
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add patch for programming the regex database through ROF file,
using the firmware instead of manually through the software.
No need to setup the DB anymore, the regex-daemon is responsible
for that always.
In the new flow the regex driver only has to program ROF rules
by using set params DevX cmd, requires ROF mkey creation.
The rules file has to be read into 4KB aligned memory.
Signed-off-by: Ady Agbarih <adypodoman@gmail.com>
Acked-by: Ori Kam <orika@nvidia.com>
This patch adds necessary hooks in the memory allocator for ASan.
This feature is currently available in DPDK only on Linux x86_64.
If other OS/architectures want to support it, ASAN_SHADOW_OFFSET must be
defined and RTE_MALLOC_ASAN must be set accordingly in meson.
Signed-off-by: Xueqin Lin <xueqin.lin@intel.com>
Signed-off-by: Zhihong Peng <zhihongx.peng@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
AddressSanitizer [1] a.k.a. ASan is a widely-used debugging tool to
detect memory access errors.
It helps to detect issues like use-after-free, various kinds of buffer
overruns in C/C++ programs, and other similar errors, as well as
printing out detailed debug information whenever an error is detected.
ASan is integrated with gcc and clang and can be enabled via a meson
option: -Db_sanitize=address
See the documentation for details (especially regarding clang).
Enabling ASan has an impact on performance since additional checks are
added to generated binaries.
Enabling ASan with Windows is currently not supported in DPDK.
1: https://github.com/google/sanitizers/wiki/AddressSanitizer
Signed-off-by: Xueqin Lin <xueqin.lin@intel.com>
Signed-off-by: Zhihong Peng <zhihongx.peng@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Currently, the documentation only contains instructions for enabling
SRIOV support for VFIO compiled as a module, but doesn't have any
instructions on how to do the same for cases where VFIO is built-in.
Add these instructions.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Since the APIs have been updated from rawdev to dmadev, the application
should also be renamed to match. This patch also includes the documentation
updates for the renaming.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
Add a command line option to control the interval between stats prints.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
Add command line option for setting the max frame size.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
Add a commandline options to control the HW copy batch size in the
application.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
Few changes in ioat sample behaviour:
- Always do SW copy for packet metadata (mbuf fields)
- Always use same lcore for both DMA requests enqueue and dequeue
Main reasons for that:
a) it is safer, as idxd PMD doesn't support MT safe enqueue/dequeue (yet).
b) sort of more apples to apples comparison with sw copy.
c) from my testing things are faster that way.
Documentation updates to reflect these changes are also included.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
The default behaviour of l2fwd is to exit if we are unable to turn
promiscuous mode on. On some aws instances turning promiscuous mode
on is not permitted. In such cases there should be a way to run the
application without promiscuous mode.
This patch allows user to turn promiscuous mode on via command line
parameter. l3fwd has a similar option available.
Signed-off-by: Sarosh Arif <sarosh.arif@emumba.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Some options are needed in the runtime many times, so leaving
it during compilation is not correct. As a result some options
has been exported into command line options to be used at run
time.
The options exported are:
--txq=N
--rxq=N
--txd=N
--rxd=N
--mbuf-size=N
--mbuf-cache-size=N
--total-mbuf-count=N
Signed-off-by: Wisam Jaddo <wisamm@nvidia.com>
Reviewed-by: Alexander Kozyrev <akozyrev@nvidia.com>
FINISHED state seems to be used to indicate that the worker's update
of the 'state' is not visible to other threads. There seems to be no
requirement to have such a state.
Since the FINISHED state is removed, the API rte_eal_wait_lcore
is updated to always return the status of the last function that
ran in the worker core.
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
Reviewed-by: Feifei Wang <feifei.wang2@arm.com>
This option should be prefixed with -- for consistency with others.
Fixes: a103a97e71 ("eal: allow user to override default mempool driver")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
Fix the mbuf offload flags namespace by adding an RTE_ prefix to the
name. The old flags remain usable, but a deprecation warning is issued
at compilation.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
The device specific structures - rte_cryptodev
and rte_cryptodev_data are moved to cryptodev_pmd.h
to hide it from the applications.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Tested-by: Rebecca Troy <rebecca.troy@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
