Add event vector support for cnxk event Rx adapter, add control path
APIs to get vector limits and ability to configure event vectorization
on a given Rx queue.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add support for event eth Tx adapter fastpath operations.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add support for event eth Rx adapter fastpath operations.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add support for event eth Rx adapter.
Resize cn10k workslot fastpath structure to fit in 64B cacheline size.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
In IAVF node TM capability querying, the unit of bandwidth is Kbps,
which is not correct according to TM specification. Change the unit to
Byte per second. Refine some unclear comments as well.
Fixes: 44d0a720a5 ("net/iavf: query QoS capabilities and set queue TC mapping")
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add MPLS training packet and offsets.
Add check to identify MPLS ethertype filters.
For example:
testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 \
type is 0x8847 / end actions queue index 2 / end
This flow will result in all the matched ingress packets be
forwarded to queue 2.
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
FDIR can't work when SPI as inputset for both ESP over IP and ESP
over UDP flow. This patch fixes this issue by adding the corresponding
input set for ESP over IP and ESP over UDP when parsing input set. Also,
it adds input set bit for NAT_T_ESP to distinguish ESP over IP and ESP
over UDP.
Fixes: 70feafc1a3 ("net/ice: support ESP/NATT flow director to match outer IP")
Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Segmentation fault mentioned in below commit is related to
other root cause under investigation.
This reverts patch below since it may have potential
risk and side effect if the first profile mask is set to 0.
Fixes: 148fdf2d35 ("net/ice/base: fix first profile mask")
Cc: stable@dpdk.org
Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Simply replace the SMP barrier with atomic thread fence for
i40e hw ring scan, if there is no synchronization point.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch adds default RSS support for IPv4 and IPv6 fragment packet.
Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Support AVF RSS for inner most header of GTPoGRE packet. It supports
RSS based on inner most IP src + dst address and TCP/UDP src + dst
port.
Signed-off-by: Lingyu Liu <lingyu.liu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Update cfa_resource_types.h to add a new entry for compatibility with FW.
Signed-off-by: Shuanglin Wang <shuanglin.wang@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
As part of the workaround put in the commit "219842b9990c",
driver caches the last read stats values from the hardware.
But this is not cleared during the clear stats operation. This
results in showing up stale stats values while reading the stats
after the clear operation.
Fixes: 219842b999 ("net/bnxt: workaround spurious zero stats in Thor")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
FW has been modified to send a new async event when it detects
a pause storm. Register for this new event and log it upon receipt.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Store the async event completion data1 and data2 in separate variables
at the start of the function before the switch case for the different
events so they can be used by any of the event handlers.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This enables device firmware to respond appropriately to BMC queries
about the driver's configured MTU.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
- HWRM version updated to 1.10.2.44
- Added corresponding driver changes for the Admin MTU field name change.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Bnxt PMD registers LSC callback (bond_ethdev_lsc_event_callback) when
working at bond mode. This callback will dead lock when LSC
interrupt triggered.
lsc interrupt ->
bnxt_handle_async_event ->
bnxt_link_update_op ->
bond_ethdev_lsc_event_callback (lsc_lock) ->
bnxt_link_update_op ->
bond_ethdev_lsc_event_callback (lsc_lock dead lock)
Fixes: c2faa1d196 ("net/bnxt: add support for LSC interrupt event")
Cc: stable@dpdk.org
Signed-off-by: Weifeng Li <liweifeng96@126.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Ensure that Rx/Tx/Async completion entry fields are accessed
only after the completion's valid flag has been loaded and
verified. This is needed for correct operation on systems that
use relaxed memory consistency models.
Fixes: 2eb53b134a ("net/bnxt: add initial Rx code")
Fixes: 6eb3cc2294 ("net/bnxt: add initial Tx code")
Cc: stable@dpdk.org
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Add support for rte_flow_item_raw to parse custom L2 and L3
protocols.
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add roc API for parsing custom L2 and L3 protocols.
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Reviewed-by: Kiran Kumar K <kirankumark@marvell.com>
Set link status to down and don't fetch link status from kernel
when device in stopped state.
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Until hierarchy committed TM hardware resources are not allocated
for node.
This patch check for status of HW resources before reading statistics.
Fixes: 1e25d57fae ("net/octeontx2: add TM stats and shaper profile")
Cc: stable@dpdk.org
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Set link status to down and don't fetch link status from kernel
when device in stopped state.
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Preallocation of MCAM entries is not valid anymore since the
AF side MCAM allocation scheme has changed. This patch disables
preallocation by changing the default MCAM preallocation size
from 8 to 1.
Fixes: 168c59cfe4 ("net/octeontx2: add flow MCAM utility functions")
Cc: stable@dpdk.org
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
In the inline inound path, a custom header would be present at L3 which
has sequence number & SPI. L2 need to be adjusted such that the eventual
packet would have L3 after L2. Remove assumption of L2 type in this
handling.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
vlan_strip and vlan_extend features need to return "unsupported"
error value.
Fixes: ff0b8b10dc ("net/mvpp2: support VLAN offload")
Cc: stable@dpdk.org
Signed-off-by: Meir Levi <mlevi4@marvell.com>
Reviewed-by: Liron Himi <lironh@marvell.com>
Need to set configure flag to allow create and commit mrvl tm
hierarchy tree. tm configuration depends on parameters that are
being set in port configure stage, e.g. nb_tx_queues.
This also aligned with the tm api description.
Fixes: 429c394417 ("net/mvpp2: support traffic manager")
Cc: stable@dpdk.org
Signed-off-by: Dana Vardi <danat@marvell.com>
Reviewed-by: Liron Himi <lironh@marvell.com>
ethtool_cmd_speed return uint32 and after the arithmetic
operation in mrvl_get_max_rate func the result is out of range.
Fixes: 429c394417 ("net/mvpp2: support traffic manager")
Cc: stable@dpdk.org
Signed-off-by: Dana Vardi <danat@marvell.com>
Reviewed-by: Liron Himi <lironh@marvell.com>
The replenishment scheme for the vectorized MPRQ Rx burst aims
to improve the cache locality by allocating new mbufs only when
there are almost no mbufs left: one burst gap between allocated
and consumed indexes.
This gap is not big enough to accommodate a corner case when we
have a very aggressive CQE compression with multiple regular CQEs
at the beginning and 64 zipped CQEs at the end.
Need to keep in mind this case and extend the replenishment
threshold by MLX5_VPMD_RX_MAX_BURST (64) to avoid mbuf overflow.
Fixes: 5fc2e5c27d ("net/mlx5: fix mbuf overflow in vectorized MPRQ")
Cc: stable@dpdk.org
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
IPV6_FRAG_EXT item is missed for RSS expansion which causes wrongly
expanded flows:
flow create 0 ingress pattern eth / ipv6 / udp dst is 250 / vxlan-gpe /
ipv6 / ipv6_frag_ext / end actions rss level 2 types ip end / end
Different from other items, IPV6_FRAG_EXT hasn't next field because HW
only support to do hash of UDP/TCP for non-fragment.
This MLX5_EXPANSION_IPV6_FRAG_EXT node in RSS expansion graph only helps
RSS expansion function to locate right node in graph from which start
to expand.
Fixes: 0e5a0d8f75 ("net/mlx5: support match on IPv6 fragment extension")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyu Min <jackmin@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Some RSS expandable items are missing which leads to the expanded
rte flow rules with wrong patterns.
Fix by adding missed items.
Fixes: d91093b9a2 ("net/mlx5: fix RSS pattern expansion")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyu Min <jackmin@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Query MLX5 port hardware if it is capable to offload IPv4
IHL field.
Provide flow rules capability to match on IPv4 IHL field.
Minimal HCA firmware version required to offload IPv4 IHL is
xx_30_2000.
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
As hrxq struct has the indirect table pointer, while matching the
hrxq, better to use the hrxq indirect table instead of searching
from the list.
This commit optimizes the hrxq indirect table matching.
Signed-off-by: Suanming Mou <suanmingm@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
This commit changes the index pool memory release configuration
to 0 when memory reclaim mode is not required.
Signed-off-by: Suanming Mou <suanmingm@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Currently, all the hash list tables are allocated during start up.
Since different applications may only use dedicated limited actions,
optimized the hash list table allocate on demand will save initial
memory.
This commit optimizes hash list table allocate on demand.
Signed-off-by: Suanming Mou <suanmingm@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
This commit enables the tag and header modify action indexed
pool per-core cache in non-reclaim memory mode.
Signed-off-by: Suanming Mou <suanmingm@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
With the new per core optimization to the list, the hash bucket size
can be tuned to a more accurate number.
This commit adjusts the hash bucket size.
Signed-off-by: Suanming Mou <suanmingm@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Modify header actions are allocated by mlx5_malloc which has a big
overhead of memory and allocation time.
One of the action types under the modify header object is SET_TAG,
The SET_TAG action is commonly not reused by the flows and each flow has
its own value.
Hence, the mlx5_malloc becomes a bottleneck in flow insertion rate in
the common cases of SET_TAG.
Use ipool allocator for SET_TAG action.
Ipool allocator has less overhead of memory and insertion rate and has
better synchronization mechanism in multithread cases.
Different ipool is created for each optional size of modify header
handler.
Signed-off-by: Matan Azrad <matan@nvidia.com>
Acked-by: Suanming Mou <suanmingm@nvidia.com>
This commit supports the list non-lcore operations with
an extra sub-list and lock.
Signed-off-by: Suanming Mou <suanmingm@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Currently, hash list uses the cache list as bucket list. The list
in the buckets have the same name, ctx and callbacks. This wastes
the memory.
This commit abstracts all the name, ctx and callback members in the
list to a constant struct and others to the inconstant struct, uses
the wrapper functions to satisfy both hash list and cache list can
set the list constant and inconstant struct individually.
Signed-off-by: Suanming Mou <suanmingm@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Currently, the list's local cache instance memory is allocated with
the list. As the local cache instance array size is RTE_MAX_LCORE,
most of the cases the system will only have very limited cores.
allocate the instance memory individually per core will be more
economic to the memory.
This commit changes the instance array to pointer array, allocate
the local cache memory only when the core is to be used.
Signed-off-by: Suanming Mou <suanmingm@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Using the mlx5 list utility object in the hlist buckets.
This patch moves the list utility object to the common utility, creates
all the clone operations for all the hlist instances in the driver.
Also adjust all the utility callbacks to be generic for both list and
hlist.
Signed-off-by: Matan Azrad <matan@nvidia.com>
Acked-by: Suanming Mou <suanmingm@nvidia.com>
This commit optimizes to call the list callback functions with global
context directly.
Signed-off-by: Suanming Mou <suanmingm@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Without lcores_share flag, mlx5 PMD was sharing the rdma-core objects
between all lcores.
Having lcores_share flag disabled, means each lcore will have its own
objects, which will eventually lead to increased insertion/deletion
rates.
Signed-off-by: Suanming Mou <suanmingm@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Hash list is planned to be implemented with the cache list code.
This commit moves the list utility to common directory.
Signed-off-by: Suanming Mou <suanmingm@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Currently, the list memory was allocated by the list API caller.
Move it to be allocated by the create API in order to save consistence
with the hlist utility.
Signed-off-by: Matan Azrad <matan@nvidia.com>
Acked-by: Suanming Mou <suanmingm@nvidia.com>
The atomic operation in the list utility no need a barriers because the
critical part are managed by RW lock.
Relax them.
Signed-off-by: Matan Azrad <matan@nvidia.com>
Acked-by: Suanming Mou <suanmingm@nvidia.com>
When a cache entry is allocated by lcore A and is released by lcore B,
the driver should synchronize the cache list access of lcore A.
The design decision is to manage a counter per lcore cache that will be
increased atomically when the non-original lcore decreases the reference
counter of cache entry to 0.
In list register operation, before the running lcore starts a lookup in
its cache, it will check the counter in order to free invalid entries in
its cache.
Signed-off-by: Matan Azrad <matan@nvidia.com>
Acked-by: Suanming Mou <suanmingm@nvidia.com>
The mlx5 internal list utility is thread safe.
In order to synchronize list access between the threads, a RW lock is
taken for the critical sections.
The create\remove\clone\clone_free operations are in the critical
sections.
These operations are heavy and make the critical sections heavy because
they are used for memory and other resources allocations\deallocations.
Moved out the operations from the critical sections and use generation
counter in order to detect parallel allocations.
Signed-off-by: Matan Azrad <matan@nvidia.com>
Acked-by: Suanming Mou <suanmingm@nvidia.com>
When mlx5 list object is accessed by multiple cores, the list lock
counter is all the time written by all the cores what increases cache
misses in the memory caches.
In addition, when one thread accesses the list for add\remove\lookup
operation, all the other threads coming to do an operation in the list
are stuck in the lock.
Add per lcore cache to allow thread manipulations to be lockless when
the list objects are mostly reused.
Synchronization with atomic operations should be done in order to
allow threads to unregister an entry from other thread cache.
Signed-off-by: Matan Azrad <matan@nvidia.com>
Acked-by: Suanming Mou <suanmingm@nvidia.com>
The internal mlx5 list tool is used mainly when the list objects need to
be synchronized between multiple threads.
The "cache" term is used in the internal mlx5 list API.
Next enhancements on this tool will use the "cache" term for per thread
cache management.
To prevent confusing, remove the current "cache" term from the API's
names.
Signed-off-by: Matan Azrad <matan@nvidia.com>
Acked-by: Suanming Mou <suanmingm@nvidia.com>
Define the types of the modify header action fields to be with the
minimum size needed for the optional values range.
Signed-off-by: Matan Azrad <matan@nvidia.com>
Acked-by: Suanming Mou <suanmingm@nvidia.com>
The flow list is used to save the create flows and to be used only
when port closes all the flows need to be flushed.
This commit takes advantage of the index pool foreach operation to
flush all the allocated flows.
Signed-off-by: Suanming Mou <suanmingm@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
This commit supports the index pool non-lcore operations with
an extra cache and lcore lock.
Signed-off-by: Suanming Mou <suanmingm@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
In some cases, application may want to know all the allocated
index in order to apply some operations to the allocated index.
This commit adds the indexed pool functions to support foreach
operation.
Signed-off-by: Suanming Mou <suanmingm@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
For object which wants efficient index allocate and free, local
cache will be very helpful.
Two level cache is introduced to allocate and free the index more
efficient. One as local and the other as global. The global cache
is able to save all the allocated index. That means all the allocated
index will not be freed. Once the local cache is full, the extra
index will be flushed to the global cache. Once local cache is empty,
first try to fetch more index from global, if global is still empty,
allocate new trunk with more index.
This commit adds new local cache mechanism for indexed pool.
Signed-off-by: Suanming Mou <suanmingm@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Some ipool instances in the driver are used as ID\index allocator and
added other logic in order to work with limited index values.
Add a new configuration for ipool specify the maximum index value.
The ipool will ensure that no index bigger than the maximum value is
provided.
Use this configuration in ID allocator cases instead of the current
logics. This patch add the maximum ID configurable for the index pool.
Signed-off-by: Suanming Mou <suanmingm@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
MR btree len is a constant during Rx replenish.
Moved retrieve of the value out of loop to reduce data loads.
Slight performance uplift was measured on both N1SDP and x86.
Suggested-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Mask of entries after the compressed CQE is covered by invalid mask of
non-compressed valid CQEs. Hence remove redundant calculation on mask.
The change showed slight performance uplift on N1SDP.
Fixes: 570acdb1da ("net/mlx5: add vectorized Rx/Tx burst for ARM")
Cc: stable@dpdk.org
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
This adds matching on the reserved field of VXLAN
header (the last 8-bits). The capability from rdma-core
is detected by creating a dummy matcher using misc5
when the device is probed.
For non-zero groups and FDB domain, the capability is
detected from rdma-core, meanwhile for NIC domain group
zero it's relying on the HCA_CAP from FW.
Signed-off-by: Rongwei Liu <rongweil@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Raslan Darawsheh <rasland@nvidia.com>
MAC PAUSE can take effect on a single TC or multiple TCs, depending on the
hardware. For example, the Kunpeng 920 supports MAC pause in a single TC,
and the Kunpeng 930 supports MAC pause in multiple TCs. This patch
supports MAC PAUSE in multiple TC for some hardware.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Since the HW limitation for VF, the VLAN filter is default enabled, and
is not allowed to be closed. Now, the limitation has been removed in
Kunpeng930 network engine, so this patch add support for VF to modify the
VLAN filter state.
A capabilities bit is added to differentiate between different platforms
and achieve compatibility. When the VF runs on an incomatible platform or
an incompatible kernel-mode driver version is used, the VF behavior is
the same as that before.
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
There are some features of VF depend on PF, so it's necessary for VF
to know whether current PF supports. Therefore, the final capability
set of VF will be composed of the capability set of hardware and the
capability set of PF.
For compatibility reasons, the mailbox HNS3_MBX_GET_TCINFO has been
modified to obatin more basic information about the current PF, including
the communication interface version and current PF capabilities set.
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
In function softnic_conn_init(), a block of memory is allocated as
connection buffer, but it is never freed in softnic_conn_free(),
which cause memory leak.
Fixes: 7709a63bf1 ("net/softnic: add connection agent")
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Add support for MSI-X interrupt vectors to the vmxnet3 driver.
This will allow more efficient deployments in cloud environments.
By default it will try to allocate 1 vector (0) for link
event and one MSI-X vector for each Rx queue. To simplify
things, it will only be enabled if the number of Tx and Rx
queues are equal (so that Tx/Rx share the same vector).
If for any reason vmxnet3 cannot enable intr mode, it will
fall back to the LSC only mode.
Signed-off-by: Yong Wang <yongwang@vmware.com>
Signed-off-by: Jochen Behrens <jbehrens@vmware.com>
Return value from bond_ethdev_8023ad_flow_set() is now checked
and appropriate message is logged on error.
Fixes: 112891cd27 ("net/bonding: add dedicated HW queues for LACP control")
Cc: stable@dpdk.org
Signed-off-by: Martin Havlik <xhavli56@stud.fit.vutbr.cz>
Acked-by: Min Hu (Connor) <humin29@huawei.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Return value is now saved to errval and log message on error reports
correct function name, doesn't use q_id which was out of context,
and uses up-to-date errval.
Fixes: 112891cd27 ("net/bonding: add dedicated HW queues for LACP control")
Cc: stable@dpdk.org
Signed-off-by: Martin Havlik <xhavli56@stud.fit.vutbr.cz>
Acked-by: Min Hu (Connor) <humin29@huawei.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Setup MSI-X interrupt, complete PHY configuration and set device link
speed to start device. Disable interrupt, stop hardware and clear queues
to stop device.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Add basic init and uninit function.
Map device IDs and subsystem IDs to single ID for easy operation.
Then initialize the shared code.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Adding bare minimum PMD library and doc build infrastructure
and claim the maintainership for ngbe PMD.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
In its current state, the API can overflow the user-passed buffer if a new
representor range appears between function calls.
In order to solve this problem, augment the representor info structure with
the numbers of allocated and initialized ranges. This way the users of this
structure can be sure they will not overrun the buffer.
Fixes: 85e1588ca7 ("ethdev: add API to get representor info")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Galaktionov <viacheslav.galaktionov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Xueming Li <xuemingl@nvidia.com>
Fix build failures seen on Fedora Core 34 (GCC 11)
because of uninitialized variables.
In function ‘ulp_mapper_index_tbl_process’:
drivers/net/bnxt/tf_ulp/ulp_mapper.c:2252:43: error:
‘*(unsigned int *)((char *)&glb_res + offsetof(struct bnxt_ulp_glb_resource_info, resource_func))’
may be used uninitialized in this function
2252 | struct bnxt_ulp_glb_resource_info glb_res;
| ^~~~~~~
drivers/net/bnxt/tf_ulp/ulp_mapper.c:2252:43: error:
‘glb_res.resource_type’ may be used uninitialized in this function
In function ‘dpool_defrag’:
drivers/net/bnxt/tf_core/dpool.c:95:18: error:
‘index’ may be used uninitialized in this function
95 | uint32_t index;
| ^~~~~
Fixes: 05b405d581 ("net/bnxt: add dpool allocator for EM allocation")
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
If the target machine has SVE feature (e.g. '-march=armv8.2-a+sve'),
and compiler is gcc-8.3, it will fail, the error is arm_sve.h:
no such file or directory.
The solution:
a. If RTE_HAS_SVE_ACLE defined (it means the minimum instruction set
support SVE ACLE) then compiles it.
b. Else if the compiler support SVE ACLE then compiles it.
c. Otherwise don't compile it.
Fixes: 8c25b02b08 ("net/hns3: fix enabling SVE Rx/Tx")
Fixes: 952ebacce4 ("net/hns3: support SVE Rx")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Acked-by: Ruifeng Wang <ruifeng.wang@arm.com>
Previously, the semantics of power monitor were such that we were
checking current value against the expected value, and if they matched,
then the sleep was aborted. This is somewhat inflexible, because it only
allowed us to check for a specific value in a specific way.
This commit replaces the comparison with a user callback mechanism, so
that any PMD (or other code) using `rte_power_monitor()` can define
their own comparison semantics and decision making on how to detect the
need to abort the entering of power optimized state.
Existing implementations are adjusted to follow the new semantics.
Suggested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: David Hunt <david.hunt@intel.com>
Acked-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
NEON vector path of the PMD needs aarch64 support. But it was
enabled for aarch32 build as well because aarch32 build had
cpu_family set to aarch64. So build for aarch32 will fail due
to unsupported intrinsics.
Fix aarch32 build by updating meson file to exclude NEON vector
implementation for aarch32.
Fixes: 749799482a ("net/virtio: add to meson build")
Cc: stable@dpdk.org
Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
NEON vector path of the PMD needs aarch64 support. But it was
enabled for aarch32 build as well because aarch32 build had
cpu_family set to aarch64. So build for aarch32 will fail due
to unsupported intrinsics.
Fix aarch32 build by updating meson file to exclude NEON vector
implementation for aarch32.
Fixes: 3983583414 ("net/bnxt: support NEON")
Cc: stable@dpdk.org
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
The sfc PMD was enabled for aarch32 which is 32-bit mode but has
cpu_family set to aarch64.
As sfc support only 64-bit system, it should be disabled for aarch32.
Updated meson file to disable sfc for aarch32 build.
Fixes: 141d287067 ("net/sfc: support aarch64 architecture")
Cc: stable@dpdk.org
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Remove conflicting declaration of this symbol.
Fixes: d0d6549860 ("net/octeontx: support event Rx adapter")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Add PCI ID for crypo_cn9k PMD.
To avoid conflicting PCI ID in crypto_octeontx2 and crypto_cn9k PMDs,
disable crypto_cn9k PMD when built with octeontx2 config.
The lack of PCI ID is causing debug build to fail on Ubuntu 18.04
for crypto_cn9k PMD.
Reported-by: Ali Alnubani <alialnu@nvidia.com>
Suggested-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
The original code use a heap pointer after it is freed.
This patch fix it.
Fixes: a14de8b498 ("net/ixgbe: destroy consistent filter")
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Reviewed-by: Haiyue Wang <haiyue.wang@intel.com>
For Arm platforms, reading descs can get re-ordered, then the
status of DD bits will be discontinuous, so add the logic to
only process continuous descs by checking DD bits.
Fixes: 4861cde461 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
In original implementation, error returned when creating VXLAN flow
director with SCTP or TCP as layer 4 protocol of inner segment.
There are several root causes for the error:
1. ice_fdir_input_set_hdrs() set ICE_FLOW_SEG_HDR_UDP into protocol
header flag of inner segment of VXLAN FDIR rule, even if it shall be
ICE_FLOW_SEG_HDR_TCP or ICE_FLOW_SEG_HDR_SCTP
2. ice_fdir_input_set_hdrs() set ICE_FLOW_SEG_HDR_VXLAN into protocol
header flag of segments of VXLAN FDIR rule, it not necessary, and can
be set automatically by ice_flow_set_fld() later
3. flow type: ICE_FLTR_PTYPE_NONF_IPV4_UDP_VXLAN hides the flow type of
inner segment of VXLAN FDIR rule, then further causes function:
ice_fdir_get_gen_prgm_pkt() cannot write correct protocol id into inner
segment of training packet.
This patch fixes those defects described above.
Fixes: 855d23a07b ("net/ice: support VXLAN VNI field in flow director")
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
In original implementation, error returned when creating VXLAN flow
director with SCTP or TCP as layer 4 protocol of inner segment.
There are several root causes for the error:
1. ice_fdir_udp4_vxlan_pkt[] is not adapted to the TCP and SCTP protocol.
Its length cannot hold TCP header, only UDP protocol was supported in
original implementation
2. VXLAN VNI offset: 45 is inconsistent with IETF RFC 7348
This patch fixes those defects described above.
Fixes: 608cd0a5e2 ("net/ice/base: support VXLAN VNI field in flow director")
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When VF reset happens, the QoS bandwidth configuration will be lost. If
the reset is not caused by DCB change, it is supposed to replay the
bandwidth configuration to VF by DCF. In this patch, when a vsi update
PF event is received from PF after VF reset, and it is confirmed that
DCB is not changed, bandwidth configuration will be replayed.
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch fixed some unreasonable error check. Move all checks into one
helper function before configuring. Skip the check for DCF (VF0).
Fixes: 3a6bfc37ea ("net/ice: support QoS config VF bandwidth in DCF")
Cc: stable@dpdk.org
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch simplify the pattern of flow rules of FDIR for IP fragment.
Flow rule can be created by the following command:
1. flow create 0 ingress pattern eth /
ipv4 fragment_offset spec 0x2000 fragment_offset mask 0x2000 /
end <actions>
2. flow create 0 ingress pattern eth / ipv6 /
ipv6_frag_ext fragment_offset spec 0x0001 fragment_offset mask 0x0001 /
end <actions>
Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch simplify the pattern of flow rules of FDIR for IP fragment.
Flow rule can be created by the following command:
1. flow create 0 ingress pattern eth /
ipv4 fragment_offset spec 0x2000 fragment_offset mask 0x2000 /
end <actions>
2. flow create 0 ingress pattern eth / ipv6 /
ipv6_frag_ext fragment_offset spec 0x0001 fragment_offset mask 0x0001 /
end <actions>
Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Caught by our QE.
When the firmware is missing, memzones were not released.
$ dpdk-testpmd -c 0x1f -a 0:0:0.0 -- -i
...
testpmd> dump_memzone
...
Zone 6: name:<RTE_METRICS>, len:0x15040, virt:0x1661b24c0, socket_id:0,
flags:0
physical segments used:
addr: 0x140000000 iova: 0x140000000 len: 0x40000000 pagesz: 0x40000000
testpmd> port attach 0000:5e:00.0
Attaching a new port...
EAL: Using IOMMU type 1 (Type 1)
EAL: Probe PCI driver: net_ice (8086:159b) device: 0000:5e:00.0 (socket 0)
ice_load_pkg(): failed to open file: /lib/firmware/intel/ice/ddp/ice.pkg
ice_dev_init(): Failed to load the DDP package,Use safe-mode-support=1 to
enter Safe Mode
EAL: Releasing PCI mapped resource for 0000:5e:00.0
EAL: Calling pci_unmap_resource for 0000:5e:00.0 at 0x2200000000
EAL: Calling pci_unmap_resource for 0000:5e:00.0 at 0x2202000000
EAL: Driver cannot attach the device (0000:5e:00.0)
EAL: Failed to attach device on primary process
testpmd: Failed to attach port 0000:5e:00.0
testpmd> dump_memzone
...
Zone 139: name:<ice_dma_17168374657430093156>, len:0x1000,
virt:0x1660ed800, socket_id:0, flags:0 physical segments used:
addr: 0x140000000 iova: 0x140000000 len: 0x40000000 pagesz: 0x40000000
With 20 tries attaching a net/ice port, we would end up with:
EAL: Probe PCI driver: net_ice (8086:159b) device: 0000:5e:00.0 (socket 0)
EAL: memzone_reserve_aligned_thread_unsafe(): Number of requested memzone
segments exceeds RTE_MAX_MEMZONE
ice_dev_init(): Failed to initialize HW
Fixes: a4c8c48fe3 ("net/ice: load OS default package")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
The compilation flag HAVE_MLX5DV_DR_DEVX_PORT depends on presence
of mlx5dv_query_devx_port routine in rdma-core library.
The mlx5dv_query_devx_port routine exists only in OFED versions
of rdma-core library and is being planned to be removed and replaced
with Upstream compatible mlx5dv_query_port.
As mlx5dv_query_devx_port is being removed all the dependencies on
the HAVE_MLX5DV_DR_DEVX_PORT compilation flag are reconsidered.
The new compilation flag HAVE_MLX5DV_DR_CREATE_DEST_IB_PORT is for
backward compatibility with older OFED versions.
Fixes: 6cfe84fbe7 ("net/mlx5: fix port action for LAG")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
In order to get E-Switch vport identifiers the mlx5 PMD relies
on two approaches:
[a] use port query API if it is provided by rdma-core library
[b] otherwise, deduce vport ids from the related VF index
The latter is not reliable and may not work with newer kernel
drivers and in some configurations (LAG), causing E-Switch
malfunction. Hence, engaging the port query API is highly
desirable.
Depending on rdma-core version the port query API is:
- very old OFED versions have no query API (approach [b])
- rdma-core OFED < 5.5 provides mlx5dv_query_devx_port,
HAVE_MLX5DV_DR_DEVX_PORT flag is defined (approach [a])
- rdma-core OFED >= 5.5 has mlx5dv_query_port, flag
HAVE_MLX5DV_DR_DEVX_PORT_V35 is defined (approach [a])
- future OFED versions might remove mlx5dv_query_devx_port
and HAVE_MLX5DV_DR_DEVX_PORT will not be defined
- Upstream rdma-core < v35 has no port query API (approach [b])
- Upstream rdma-core >= v35 has mlx5dv_query_port, flag
HAVE_MLX5DV_DR_DEVX_PORT_V35 is defined (approach [a])
In order to support the new mlx5dv_query_port routine, the
conditional compilation flag HAVE_MLX5DV_DR_DEVX_PORT_V35
is introduced by this patch. The flag HAVE_MLX5DV_DR_DEVX_PORT
is kept for compatibility with previous rdma-core versions.
Despite this patch is not a bugfix (it follows the introduced API
variation in underlying library), it resolves the compatibility
issue and is highly desired to be ported to DPDK LTS.
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
In order to allow\disallow configuring rules with identical
patterns, the new device argument 'allow_duplicate_pattern'
is introduced.
If allow, these rules be inserted successfully and only the
first rule take affect.
If disallow, the first rule will be inserted and other rules
be rejected.
The default is to allow.
Set it to 0 if disallow, for example:
-a <PCI_BDF>,allow_duplicate_pattern=0
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
This adds the validation when creating a policy with meter action.
Currently meter action is only allowed for green color in policy, and
8 meters are supported at maximum in one meter hierarchy.
Signed-off-by: Shun Hao <shunh@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
When creating hierarchy meter, its color rules will increase next
meter's reference count, so when destroy the hierarchy meter, also
need to dereference the next meter's count.
During flushing all meters of a port, need to destroy all hierarchy
meters and their policies first, to dereference the last meter in
hierarchy. Then all meters have no reference and can be destroyed.
Signed-off-by: Shun Hao <shunh@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
When using meter hierarchy with multiple meters, every meter may have
drop counter, so a packet being set red color by one meter should be
counted to that specific meter only.
To support this, add tag action in the color rule so packet going to
next new meter can have its meter id, so as to be counted to the
correct drop counter in drop table.
Signed-off-by: Shun Hao <shunh@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
This makes the meter policy support meter action. So multiple meters
can be chained as a meter hierarchy.
Only termination meter is allowed as the last meter in a hierarchy,
and there're two cases:
1. The last meter has non-RSS policy, can directly create sub-policy
and color rules during each meter's policy creation.
2. The last meter has RSS policy, don't create sub-policy/rules when
creating meter policy. Only when a RTE flow is using the meter hierarchy,
will iterate all meters of the hierarchy and create needed sub-
policies and color rules for them.
Signed-off-by: Shun Hao <shunh@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
If user wants to do MPLS inner RSS and only provides pattern
till MPLS without inner items [1], RSS expansion will expand flows
into 13 sub-flows[2] which is too many and it impacts flow insert
rate, stack usage becomes large as well.
This expansion into 13 sub-flows seems not worthy of and it can
be significantly reduced (i.e, 7 sub-flows [3]) by user providing
at least one inner L2/L3 item [4].
[1]:
pattern eth / ipv4 / udp / mpls / end actions rss type tcp udp ip
end level 2 / end
[2]:
eth / ipv4 / udp / mpls
eth / ipv4 / udp / mpls / ipv4
eth / ipv4 / udp / mpls / ipv4 / udp
eth / ipv4 / udp / mpls / ipv4 / tcp
eth / ipv4 / udp / mpls / ipv6
eth / ipv4 / udp / mpls / ipv6 / udp
eth / ipv4 / udp / mpls / ipv6 / tcp
eth / ipv4 / udp / mpls / eth / ipv4
eth / ipv4 / udp / mpls / eth / ipv4 / udp
eth / ipv4 / udp / mpls / eth / ipv4 / tcp
eth / ipv4 / udp / mpls / eth / ipv6
eth / ipv4 / udp / mpls / eth / ipv6 / udp
eth / ipv4 / udp / mpls / eth / ipv6 / tcp
[3]:
eth / ipv4 / udp / mpls / eth
eth / ipv4 / udp / mpls / eth / ipv4 / udp
eth / ipv4 / udp / mpls / eth / ipv4 / tcp
eth / ipv4 / udp / mpls / eth / ipv6
eth / ipv4 / udp / mpls / eth / ipv6 / udp
eth / ipv4 / udp / mpls / eth / ipv6 / tcp
[4]:
pattern eth / ipv4 / udp / mpls / eth / end actions rss type tcp udp ip
level 2 / end
Signed-off-by: Xiaoyu Min <jackmin@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
MPLSoUDP and MPLSoGRE are supported by PMD from
rte flow point of view.
RSS expansion doesn't support above but, instead, supports
normal MPLS over L2, which actually will be rejected by PMD.
This patch removes RSS expansion support of the MPLS over L2
and adds support of MPLSoUDP and MPLSoGRE.
In addition to above, support for eth over MPLS expansion is
added too.
Fixes: a4a5cd21d2 ("net/mlx5: add flow MPLS item")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyu Min <jackmin@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
HW doesn't support match MPLS over IP traffic.
Remove related code.
Fixes: d1abe664dd ("net/mlx5: add MPLS to Direct Verbs flow engine")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyu Min <jackmin@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Offsets are not taken into account during MAC addresses
manipulation for the MODIFY_FIELD action. That leads to
a wrong split between 0-15 and 16-47 bits and corrupted
data being copied to/from MAC addresses. Use both source
and destination offsets to calcucate the proper modify
header action specification.
Fixes: fdd0c046f4 ("net/mlx5: fix modify field action order for MAC")
Cc: stable@dpdk.org
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
MLX5 PMD supports L3 and L4 integrity bits.
L4 checksum-ok bit was not translated correctly.
The patch updates the l4_csum_ok integrity bit translation.
Fixes: 79f8952783 ("net/mlx5: support integrity flow item")
Cc: stable@dpdk.org
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
If there are many VFs the Netlink message length sent by kernel
in reply to RTM_GETLINK request can be large. We should query
the size of message being received in advance and allocate
the large enough buffer to handle these large messages.
Fixes: ccdcba53a3 ("net/mlx5: use Netlink to add/remove MAC addresses")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Currently PMD needs previous layer information in order to set
corresponding match field for MPLSoGRE or MPLSoUDP.
GRE_KEY item is missing as supported previous layer when translate
item MPLS, which causes flow[1] cannot match MPLS over GRE traffic.
According to RFC4023, MPLS over GRE tunnel with optional key
field needs to be supported too.
By adding missing GRE_KEY as supported previous layer fix problem.
[1]:
flow create 0 ingress pattern eth / ipv6 / gre k_bit is 1 / gre_key /
mpls label is 966138 / end actions queue index 1 / mark id 0xa / end
Fixes: a7a0365565 ("net/mlx5: match GRE key and present bits")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyu Min <jackmin@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Flow rule pattern may be implicitly expanded by the PMD if the rule
has RSS flow action. The expansion adds network headers to the
original pattern. The new pattern lists all network levels that
participate in the rule RSS action.
The patch validates that buffer for expanded pattern has enough bytes
for new flow items.
Fixes: c7870bfe09 ("ethdev: move RSS expansion code to mlx5 driver")
Cc: stable@dpdk.org
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Currently the flow dump provides few information about actions
- just the pointers. Add implementations to display details for
counter, modify_hdr and encap_decap actions.
For counter, the regular flow operation query is engaged and
the counter content information is provided, including hits
and bytes values.For modify_hdr, encap_and decap actions,
the information stored in the ipool objects is dumped.
There are the formats of information presented in the dump:
Counter: rec_type,id,hits,bytes
Modify_hdr: rec_type,id,actions_number,actions
Encap_decap: rec_type,id,buf
Signed-off-by: Haifei Luo <haifeil@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
For mlx5 DMA unmap, write lock should be used for rebuilding memory
region cache table rather than read lock.
Fixes: 989e999d93 ("net/mlx5: support PCI device DMA map and unmap")
Cc: stable@dpdk.org
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Currently when creating meter policy, a src port_id match item will
always be added in switch domain. So if one meter is used by another
port, it will not work correctly.
This issue is solved:
1. If policy fate action is port_id, add the src port_id match item,
and the meter cannot be shared by another port.
2. If policy fate action isn't port_id, don't add the src port_id
match, meter can be shared by another port.
This fix enables one meter being shared by different ports. User can
create a meter flow using a port_id match item to make this meter
shared by other port.
Fixes: afb4aa4f12 ("net/mlx5: support meter policy operations")
Cc: stable@dpdk.org
Signed-off-by: Shun Hao <shunh@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
When preparing prefix flow using ASO meter, if it's tx flow, need
to make meter action the first one.
Currently the check of flow direction in switch domain is incorrect
that it checks the flow dev port only.
This adds the fix for the check that if there's port_id match item
in flow, use that port_id as src port to determine flow direction.
Fixes: c99b4f8bc2 ("net/mlx5: support ASO meter action")
Cc: stable@dpdk.org
Signed-off-by: Shun Hao <shunh@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
The meter policy handlers are managed by user IDs and the driver used l3
table in order to map the user ID to the internal driver handler of the
policy.
The l3 table was wrongly saved in the shared device structure which
manages all the switch domain ports what made the user IDs shared
between different ethdev ports.
Move the policy l3 table to be per port by saving it in the port private
structure.
Fixes: afb4aa4f12 ("net/mlx5: support meter policy operations")
Cc: stable@dpdk.org
Signed-off-by: Shun Hao <shunh@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Currently a list is used to save all meter profile ids, which is
not efficient when looking up profile from huge amount of profiles.
This changes to use an l3 table instead to save meter profile ids,
so as to improve the lookup performance.
Signed-off-by: Shun Hao <shunh@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
The inline data length for TSO ethernet segment should be
calculated from the TSO header instead of the inline size
configured by txq_inline_min devarg or reported by the NIC.
It is imposed by the nature of TSO offload - inline header
is being duplicated to every output TCP packet.
Fixes: cacb44a099 ("net/mlx5: add no-inline Tx flag")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
The representor definition was introduced in the latest code.
For non-representor port, like PF port, use the 0xffff instead of -1.
This patch updates the representor id checking during splitting sample
flow.
Fixes: cb95feefdd ("net/mlx5: support sub-function representor")
Cc: stable@dpdk.org
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Xueming Li <xuemingl@nvidia.com>
All the mlx5 drivers using MRs for data-path must unregister the mapped
memory when it is freed by the dpdk process.
Currently, only the net/eth driver unregisters MRs in free event.
Move the net callback handler from net driver to common.
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
The introduced MODIFY_FIELD action was used to manipulate
the packet header field through copy or set operations.
These modify header actions should be counted as one action
in low level, the current code used wrong actions flags
checking for modify field action.
This patch update the action flags checking into the correct
MODIFY_HDR_ACTIONS set.
Fixes: 641dbe4fb0 ("net/mlx5: support modify field flow action")
Cc: stable@dpdk.org
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Before 19.08 release the Tx burst routines of mlx5 PMD
provided data inline for the first short segments of the
multi-segment packets. In the release 19.08 mlx5 Tx datapath
was refactored and this behavior was broken, affecting the
performance.
For example, the T-Rex traffic generator might use small
leading segments to handle packet headers and performance
degradation was noticed.
If the first segments of the multi-segment packet are short
and the overall length is below the inline threshold it
should be inline into the WQE to fix the performance.
Fixes: 18a1c20044 ("net/mlx5: implement Tx burst template")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
When creating the meter sub-policy RSS rule,
the RSS descriptor was used before its update.
It also need update tunnel bit in RSS descriptor
after flow translate.
Use it only when it is updated.
Fixes: ec962bad14 ("net/mlx5: fix metering cleanup on stop")
Cc: stable@dpdk.org
Signed-off-by: Li Zhang <lizh@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
WINOF2 2.70 Windows kernel driver allows DevX rule creation
of types TCP and IPv6.
Added the types to the supported items in mlx5_flow_os_item_supported
to allow them to be created in the PMD.
Added description of new rules support in Windows kernel driver WINOF2 2.70
to the mlx5 driver guide.
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Don't set rxq interrupt config
Applications can set the rxq interrupt config to 1 or 0 as needed.
If an application is not interested in handling Rx interrupts and
prefers to poll Rx rings, there is no need for the PMD to set this
config option to 1.
Fixes: 1fe427fd08 ("net/bnxt: support enable/disable interrupt")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Add support for runtime Rx and Tx queue setup. This will allow
Rx/Tx queue setup after the interface is started.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Code related to maintaining completion ring "valid" state is
no longer needed, remove it.
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Preserve the raw (unmasked) transmit completion ring
consumer index.
Remove cache prefetches that have no measurable performance
benefit.
Fixes: c7de4195cc ("net/bnxt: modify ring index logic")
Cc: stable@dpdk.org
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
With Tx completion batching, a single transmit completion
can correspond to one or more transmit descriptors, adjust
implementation to account for this.
RTE_ETH_TX_DESC_DONE should be returned for descriptors that
are available for use instead of RTE_ETH_TX_DESC_UNAVAIL.
Fixes: 5735eb2419 ("net/bnxt: support Tx batching")
Fixes: 478ed3bb7b ("net/bnxt: support Tx descriptor status")
Cc: stable@dpdk.org
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
When the driver receives RESET_NOTIFY async event from FW or detects
a FW fatal error condition, it tries to recover from the error.
When the driver fails to recover from the error condition, fixed to
send device removal event to the application.
Fixes: df6cd7c1f7 ("net/bnxt: handle reset notify async event from FW")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Driver should enable autoneg on a port if FW supports it.
Because of a wrong check, driver is not enabling autoneg
on a port after setting forced speed on Whitney+.
Fixes: 7bc8e9a227 ("net/bnxt: support async link notification")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This is a cleanup commit and no functional change.
1. use macros instead of hard coded values
2. remove unnecessary comments
Fixes: 5cd0e2889c ("net/bnxt: support NIC Partitioning")
Fixes: 2ba07b7dbd ("net/bnxt: set the hash key size")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add support to fetch the SFP EEPROM settings from the firmware.
For SFP+ modules we will display 0xA0 page for status and 0xA2 page
for other information. For QSFP modules we will show the 0xA0 page.
Also identify the module types for QSFP28, QSFP, QSFP+ apart
from the SFP modules and return an error for 10GBase-T PHY.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
1. Disable accum_stats for Thor
2. Delete the generic port table for default flow
3. The packet mask to calculate the number of packets must be 28 bits.
4. Increase the WC TCAM entries to 512 per application and add 2
shared L2 context TCAM entries to match identifiers for flow
scaling
5. Ignore multiple critical resources in ULP flow database
6. Renamed conditional code update to function opcode.
7. Updated TRUFLOW debug logs to support the above changes.
8. As part of the HA cleanup, the shared session name now allows the user
to designate that the session uses the wc_tcam regions within the
shared session.
9. The CFA action pointer does not exist if there is no support for
VF representor, so no need to display the message for use case where
there is no support for VF representors.
10. Cleanup flow counter software accumulation.
11. When an application exits ungracefully, the HA code now
clears the appropriate shared WC region and sets the HA state.
12. Removal of unnecessary INFO message. The message is an indicator that
the ports are being removed from DPDK, but all cleanup has not
completed. Once the cleanup is completed, the timer will be stopped.
Signed-off-by: Shahaji Bhosle <sbhosle@broadcom.com>
Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add context in ULP for timers.
The alarm callback needs to have a valid context pointer when it is
invoked. The context could become invalid if the port goes down and
the callback is invoked before it is cancelled.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add the ability for cooperative applications to share resources and
use the high availability functionality in the HW.
Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Shahaji Bhosle <sbhosle@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
1. Add template support for shared sessions.
2. Store the shared session flag in flow data base.
3. Store WC TCAM region in the computational field.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Shared sessions require both named and unnamed resources to be requested
during a tf_open_session. ULP uses named resources for global resources
that are pre-allocated and remain through the life of the application.
Unnamed resources are generally per flow resources and allocated on
demand. The sum of both named and unnamed resources must be requested
when initializing the session. The ulp_init now processes both lists
prior to calling tf_open_session for both shared and regular sessions.
Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The application id in the ULP matcher makes the template matching
restrict to only flows that are supported for that application.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Shahaji Bhosle <sbhosle@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add field opcodes that perform logical evaluation of
multiple conditions. Also add more logging especially in
error path.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Shared session permits cooperative sharing of prescribed resources
between applications.
- devargs added for app-id in order to enable sharing session
resources across applications
- shared session management added
- TRUFLOW resource reservations are now app ID and device dependent
Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
1. Remove Ether type, VLAN type and IP proto type from pattern matching,
since the header bits can be used for matching. This reduces the class
template signatures by a factor of 8.
2. Remove the wild card bit in the pattern matching since same template
can be used for both exact and wild card entries.
3. The action record pointers have to use higher range to not collide
with the firmware action record pointers. Hence reduced the number of
action record pointers for Whitney platform.
4. The conditional update opcode provide functionality to reject flows
for instance reject flows that do not adhere to flow signature match.
5. Added check to not populate protocol specifications if the
protocol mask is null or zero.
6. Check that field array is not overrun.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
1. Add templates to support Thor platform.
2. Flow counter manager is not enabled if no flow counters are
configured.
3. Mark database is not enabled if mark action is not supported.
4. Removed application to port default flow.
5. Add allocate and write for the global registry file.
6. Multiple default flow templates are combined to one.
7. Remove default loopback action record, this is required in order to
support multiple platforms.
8. Enable port table support in the generic table.
9. remove global template table in order to support multiple platforms.
10. Add support to get parent VNIC from port table database.
11. VF representor action mark is made optional since not all
configurations need representor support.
12. Add layer 4 ports to computational fields.
13. Update templates to support the above changes.
14. Add support for wildcard.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Added support for generic table to enable search of keys that
are larger than 16 bits using hash table.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
1. The internal and external exact match table resource types
is combined since the resource handle contains the encoded
type whether it is internal or external exact match entry.
2. When a flow doesn't hit the offloaded rules, the default action is
to send it to the kernel (L2 driver interface). In order to do that,
TRUFLOW must know the kernel interface's (PF's) default vnic id.
This patch fetches the PF's default vnic id from the dpdk core and
stores it in port database. It also stores the mac addr for the
future usage. Renamed compute field for layer 4 port enums.
Added support for port database opcode that can get port details
like mac address which can then be populated in the l2 context entry.
3. Both active and default bit set need to considered to check if a
specific flow type is enabled or not.
4. ulp mapper fetches the dpdk port id from the compute field index
BNXT_ULP_CF_IDX_DEV_PORT_ID which is used to get the interface’s
mac address eventually. However, the compute field array is not
populated with dpdk port id at the index BNXT_ULP_CF_IDX_DEV_PORT_ID.
The problem fixed by populating the compute field array correctly.
5. Some dpdk applications may accumulate the flow counters while some
may not. In cases where the application is accumulating the counters
the PMD need not do the accumulation itself and viceversa to report
the correct flow counters.
6. Pointer to bp is added to open session parms to support
shared session.
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
The templates are updated to enable the extended exact match
table support. As part of this change, the action record size of
the action has to be calculated dynamically so it can be included
in the match table.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Farah Smith <farah.smith@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch does the following to support GRE flows:
1. RTE_FLOW_ITEM_TYPE_ANY & RTE_FLOW_ITEM_TYPE_GRE processing
2. Calculate the absolute function ID from the logical VF ID
passed as part of RTE_FLOW_ACTION_TYPE_VF action.
3. Move bnxt_get_bp API to bnxt_ethdev.c
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The computational field is enabled for wild card pattern support.
The template checks the computational field to add a flow as wild
card entry or exact match entry.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
For support for wild card TCAM, some of the header fields have to
be partially written, hence this new opcode is added.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
1. The flow database opcode is updated to split the alloc push resource
item so it can be controlled using the control table.
2. The class and action match signatures are populated with pattern ids
that are matched against template pattern id to reject any unsupported
class and action combinations.
3. The flow DB opcode should be no op when accessing the
global registry identifiers.
4. The resource function for branch is changed to control so that it
is extended to perform flow database operations and not just branch
operations.
5. The conditional goto processing now supports negative numbers to
support looping of the mapper tables to support flow ranges and
also enable conditional fail goto to support failure path mapper
tables.
6. The field mapper opcode is updated to add all ones to fields
that support exact match.
7. Added key info and identifier list to whitney action templates
The whitney plus templates are updated to use the mapper infrastructure
changes.
8. The partition interface table configuration of the default
egress rule for the representor interface needs to use the
reserved parif interface that is specific to each
platform. The pipeline for the representor interface is broken
since incorrect parif configuration cause the miss path packets to
be dropped.
9. In the mapper table processing, if a failure condition is hit
due to invalid memory type then use the conditional goto failure
configuration instead of jumping to next table. This causes ipv6
exact match entry to be skipped. This patch fixes that issue.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Shahaji Bhosle <sbhosle@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The conditional field opcode provides capability to perform
changes to the field values specified by template to address
platform specific modifications. For instance, mirror id value
is modified before it is configured in the hardware.
The addition of L4 port compute fields enables support of
generic exact match rule that can support both TCP and UDP
flows with the same template.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Shahaji Bhosle <sbhosle@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The shared handle is set in the mapper params when generic resource
are created, this shall be used by application as a handle to the
shared resource like mirror handle.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The condition execute of the mapper tables have goto field that
defines the offset of the next table to be processed instead of
sequential processing of the tables, this improving the performance.
Also, modify key and mask field opcode processing
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Conflict resolution feature allows rejection of flows based on
the previously added flows that conflict. For instance, a five
tuple flow is added and then you add a new flow with only 4 tuple
instead having same layer2 details then it will be rejected.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Added ULP priority opcode to enable flexibility to
the usage of the flow priority. New opcodes help template
specify the flow priority accordingly.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Douglas Flint <douglas.flint@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
1. Added interface table specific opcode to process interface table
entry creation and reuse. This allows reuse of the interface table
entry for multiple flows. Changed the regfile apis to store
the data in big endian format.
2. The result blob creation being done in tcam, interface, index
tables are consolidate to a common method.
3. Added result blob processing for generic table write
4. Modified the index table opcode processing to support new opcodes.
5. The driver was setting key size that did not take into account
the word alignment.
6. The hard coded values for critical resource is replaced with
template defined values.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The driver is using physical port id as the index into
the tunnel inner flow table. However, this will not work in case
of multichannel mode where multiple physical functions are going
to share the same physical port id.
When tunnel inner flow offload request comes before tunnel
outer flow offload request, the driver caches the tunnel inner flow
details and programs it in the hardware after installing the tunnel
outer flow in the hardware. If more than one tunnel inner flow arrives
before tunnel outer flow is offloaded, the driver rejects any such
tunnel inner flow offload requests.
This patch fixes the above two problems by
1. Using dpdk port id as the index to store tunnel inner info.
2. Caching any number of tunnel inner flow offload requests that come
before offloading tunnel outer flow offload request
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Shahaji Bhosle <sbhosle@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Added TCAM table specific opcode to process TCAM entry creation
and reuse. This change removes the TCAM cache mechanism and uses
the generic table mechanism for reuse of TCAM entries.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Conditional execution and rejection processing added for templates and
tables. This allows the mapper to skip tables and reject templates
based on the content without having to hard code rules.
Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Added support for mapper flow database opcode to enable
shared resources like mirror action. This allows mapper
to conditionally populate flow database based on template content.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Added support for generic table processing, this feature shall
enable support for shared resource like mirror and TCAM
cache tables.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Currently, a devarg (host-based-truflow) is passed while launching
the app to enable TRUFLOW feature. However, this mechanism adds
an extra step in enabling TRUFLOW. This doesn't give a seamless
experience when flow offloads has to work with FW that doesn't/does
support TRUFLOW feature. Also, it's likely that customers may not
want to use devarg to enable flow offloads.
This patch fixes it by checking for TRUFLOW feature support in
device's capabilities and configurations field of the hwrm_ver_get.
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Add TRUFLOW API to clear either the hi or the low regions
in WildCard TCAM for ungraceful exit cleanup.
Signed-off-by: Farah Smith <farah.smith@broadcom.com>
Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Jay Ding <jay.ding@broadcom.com>
Reviewed-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
If the session shares WC TCAM entries with others,
specify it in the session name by attach "-wc_tcam".
Firmware will flush the shared WC TCAM entries if
the last shared session using them is closed.
Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Farah Smith <farah.smith@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Clean up all allocated hi or lo pool TCAM regions on close.
Along with message cleanup and remove unnecessary multi-slice options
Also make sure that find next free entry should start from 0 first time.
Signed-off-by: Farah Smith <farah.smith@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
- Close FW session if session open fails after Fw session open.
- Additional WC TCAM debug info to help in future debug
- Reduce key/mask buffer sizes for performance
- When a 64b counter is freed, clear the entry
Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Signed-off-by: Farah Smith <farah.smith@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add TRUFLOW API to get the shared table increment value
for a given TRUFLOW table type.
The API is being added for Wh+ and Thor devices.
Signed-off-by: Farah Smith <farah.smith@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
- Add new API to move WC TCAM regions from the hi pool
to the low pool.
- Enable shared TCAM get/set functions on Thor.
Signed-off-by: Farah Smith <farah.smith@broadcom.com>
Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Cleanup some of the log messages in the session open and close paths.
Signed-off-by: Farah Smith <farah.smith@broadcom.com>
Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
- switch to single slice management on Wh+
- Support of shared session WC_TCAM_HIGH and WC_TCAM_LOW regions
- Enable/disable using TF_TCAM_SHARED flag in tf_core.h
- Fix empty session module DBs in the case that none are
allocated for a given module type
Signed-off-by: Farah Smith <farah.smith@broadcom.com>
Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Allow an application to only reserve resources for one direction.
Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
- Distinguish the shared session on host side using PCI address
- One session could be shared by multiple interfaces.
Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Farah Smith <farah.smith@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The dpool allocator supports variable size entries and
also supports defragmentation of the allocation space.
EM will by default use the fixed size stack allocator.
The dynamic allocator may be selected at build time.
The dpool allocator supports variable size entries and
also supports defragmentation of the allocation space.
Signed-off-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Farah Smith <farah.smith@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
There are 2 types of sessions - shared and non-shared. For non-shared
all the allocated resources are owned and managed by a single
session instance. No other applications have access to the
resources owned by the non-shared session. For a shared session,
resources are shared between 2 applications.
The FW shared session can only be created by one application and
shared by other apps. The host session that creates the FW shared
session is the creator.
Applications can retrieve the reserved resources through a new API
tf_get_session_resc_info.
Each module supports two sessions, one is shared session, the other
is non-shared session.
Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Farah Smith <farah.smith@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
RM databases are statically defined in each module. New static
database needs to be defined in the code when multiple sessions
are added. Add dynamic alloc database and associate it to each
session.
Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Farah Smith <farah.smith@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
- Move Bulk get to a direct HWRM message
- Deprecate code based on HCAPI changes
Signed-off-by: Farah Smith <farah.smith@broadcom.com>
Signed-off-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
- Move HCAPI hashing code to common file and add Thor support.
- Change DPDK EM insert for FKB to use limited size Type 3 key.
- Update FKB builder to be able to tell between EM and WC keys
during transform.
FKB is the Flexible Key Builder in Thor used while inserting flows.
Signed-off-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Farah Smith <farah.smith@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
HCAPI RM now manages 64Byte records instead of 8Byte.
Truflow core RM will manage the same. The tf_tbl core
APIs now return 8B pointer addresses. These can
be used directly as SRAM pointers in Action Records.
When communicating with the firmware 8 byte addresses
will be used.
Signed-off-by: Farah Smith <farah.smith@broadcom.com>
Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
- Translate Truflow action types for Thor to HCAPI RM
resource defined SRAM banks.
- move module type enum definitions to tf_core API
- Switch to subtype concept for RM.
- alloc/free working for Thor SRAM table type for full AR.
Signed-off-by: Farah Smith <farah.smith@broadcom.com>
Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
- Implement TCAM get in host
- Add Thor support for TCAM set/free
Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Reviewed-by: Farah Smith <farah.smith@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Main TF changes to support EM insert with FKB.
Flexible Key builder is required to create Wild Card
and Exact Match keys for TCAM lookups.
Signed-off-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Farah Smith <farah.smith@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
- Remove unused tables from tf_tbl_type
- Encode flow type into flow handle (internal or external)
- Clean up Whitney resource tables
- Clean up Truflow CLI open tables and update Thor resources
- Add Thor SRAM and external pool types to core API
- Remove unneeded Stingray table reference
Signed-off-by: Farah Smith <farah.smith@broadcom.com>
Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Jay Ding <jay.ding@broadcom.com>
Reviewed-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
- Allow tf_open to continue if no resource is allocated
for some table type.
- Close the session if binding fails for any table.
- Close the session if no resource is allocated for all tables.
Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add get mailbox dev op so that mailbox offset is based on device
instead of a hard coded value.
Signed-off-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Farah Smith <farah.smith@broadcom.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add infrastructure code to support TRUFLOW on Thor NICs.
Also update meson.build
Signed-off-by: Farah Smith <farah.smith@broadcom.com>
Signed-off-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Before introducing more HCAPI components to DPDK, the CFA code needs
to be organized into a dedicated folder so it is separated from
other new HCAPI components
Signed-off-by: Jeffrey Huang <jeffrey.huang@broadcom.com>
Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Farah Smith <farah.smith@broadcom.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Feature flags in dev would be updated during config. On reconfigure, the
field need to be set again to original value.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
This patch fix the input arguments assignment to the correct
parameters in mrvl_pmd_init_params struct.
Fixes: 25b05a1c80 ("crypto/mvsam: parse max number of sessions")
Cc: stable@dpdk.org
Signed-off-by: Dana Vardi <danat@marvell.com>
Reviewed-by: Liron Himi <lironh@marvell.com>
Till now comments explain queue mapping per
one and two crypto devices.
Now added comments for queue mapping for three
crypto devices supported in CN9132.
Signed-off-by: Michael Shamis <michaelsh@marvell.com>
Reviewed-by: Liron Himi <lironh@marvell.com>
This patch fix wrong clear memory session pointer.
When call mrvl_crypto_pmd_sym_session_clear function,
it might cause the following error:
CRYPTODEV: set_sym_session_private_data() line 497:
Set private data for driver 1 not allowed
This fix set zeroes to mrvl_crypto_session pointer instead to
rte_cryptodev_sym_session pointer, and will verify that
rte_cryptodev_sym_session pointer will not lose data such as
nb_drivers.
Bugzilla ID: 646
Fixes: 8a61c83af2 ("crypto/mrvl: add mrvl crypto driver")
Cc: stable@dpdk.org
Signed-off-by: Dana Vardi <danat@marvell.com>
Reviewed-by: Michael Shamis <michaelsh@marvell.com>
Reviewed-by: Liron Himi <lironh@marvell.com>
Increased AAD max size up to 64B and allowed AAD increment step
1B according to EIP197 token HW limitation.
In addition, some capabilities were found incorrect due to
running FIPS tests. The patch fix the capabilities.
Fixes: 8a61c83af2 ("crypto/mrvl: add mrvl crypto driver")
Fixes: 2c22aa4f8f ("crypto/mvsam: update hash digest sizes")
Fixes: a84226fc05 ("crypto/mvsam: support HMAC SHA224")
Cc: stable@dpdk.org
Signed-off-by: Michael Shamis <michaelsh@marvell.com>
Reviewed-by: Liron Himi <lironh@marvell.com>
Tested-by: Liron Himi <lironh@marvell.com>
For AEAD session and AES-GCM mode, IV offset will
set to include the Nonce.
In addition, the following operations order will define:
first encryption and then authentication.
Fixes: 8a61c83af2 ("crypto/mrvl: add mrvl crypto driver")
Cc: stable@dpdk.org
Signed-off-by: Dana Vardi <danat@marvell.com>
Reviewed-by: Liron Himi <lironh@marvell.com>
Tested-by: Liron Himi <lironh@marvell.com>
This patch fixes the aesni_gcm performance issue on systems with AVX512
CPU flag presented but with VAES CPU flag missing, such as Skylake.
Fixes: 81fe96a0ce ("crypto/aesni_gcm: use architecture independent API")
Cc: stable@dpdk.org
Signed-off-by: Kai Ji <kai.ji@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Added support for crypto adapter OP_FORWARD mode.
As OcteonTx CPT crypto completions could be out of order, each crypto op
is enqueued to CPT, dequeued from CPT and enqueued to SSO one-by-one.
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add checks to catch overflow of any offsets. Offset control word
specifies,
1. 16 bits encryption offset
2. 8 bits IV offset
3. 8 bits auth offset
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
In Arm platform, when "RTE_ARCH_ARM64_MEMCPY" is set as true, gcc will
report variable uninitialized warning:
../drivers/crypto/qat/qat_sym_session.c: In function ‘partial_hash_compute’:
../lib/eal/include/generic/rte_byteorder.h:241:24: warning:
‘<U35a0>’ may be used uninitialized in this function
[-Wmaybe-uninitialized]
241 | #define rte_bswap32(x) __builtin_bswap32(x)
...
This is because "digest" will be initialized by "rte_memcpy" function
rather than "memcpy" if "RTE_ARCH_ARM64_MEMCPY" is set as true.
Furthermore, 'rte_memcpy' will initialize 'digest' with two steps
by invoking rte_mov_x functions. For example:
partial_hash_sha1 -> rte_memcpy -> rte_memcpy_ge16_lt_128 ->
step 1: rte_mov16(dst,src )
step 2: rte_mov16(dst - 16 + n, src - 16 + n)
However, gcc compiler cannot identify this multi-step initialization,
then it will report warning.
To fix this, use "memset" to initialize "digest".
Fixes: cd7fc8a84b ("eal/arm64: optimize memcpy")
Cc: stable@dpdk.org
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
When used with crypto adapter, metabuf pool would be shared across
cores. Account for the same in pool size.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
When used with crypto adapter, metabuf pool would be shared across
cores. Account for the same in pool size.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add asymmetric crypto capabilities supported
by cn9k and cn10k PMDs. Documentation is also
updated for the same.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add asymmetric crypto session ops for both cn9k
and cn10k PMD.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add support for digest support for various algorithms.
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
The set key functions are added in roc to be used
in crypto operations.
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
