testpmd will occur infinite loops when device hotplug remove.
We can fix the issue by using the pci generic remove function
Fixes: ac89d46096 ("net/i40e: release port upon close")
Signed-off-by: Chenxu Di <chenxux.di@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Add DEV_RX_OFFLOAD_RSS_HASH flag for all PMDs that support RSS hash
delivery.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Change the type of burst mode information from bit field to free string
data, so that each PMD can describe the Rx/Tx busrt functions flexibly.
Fixes: eb5902504a ("ethdev: add API for getting burst mode information")
Fixes: 6b6609f68c ("net/i40e: support Rx/Tx burst mode info")
Fixes: e9a10e6c21 ("net/ice: support Rx/Tx burst mode info")
Fixes: 7fe108edcf ("app/testpmd: show Rx/Tx burst mode description")
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Ray Kinsella <ray.kinsella@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Qinq strip is not supported by i40e. When user tries to turn on
QinQ strip, the driver gives unsupported return value and log.
Signed-off-by: Tao Zhu <taox.zhu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
During LTO build compiler reports some 'false positive' warnings about
variables being possibly used uninitialized. This patch silences these
warnings.
Exemplary compiler warning to suppress (with LTO enabled):
error: ‘filter_idx’ may be used uninitialized in this function
[-Werror=maybe-uninitialized]
PMD_DRV_LOG(INFO, "Added port %d with AQ command with index %d",
Signed-off-by: Andrzej Ostruszka <aostruszka@marvell.com>
If support-multi-driver is enabled, the global registers should not
be configured. But with the current code base, if creating a flow
with rte_flow API, the global register GLQF_FD_MSK may be changed.
Fixes: cfdfca493c ("net/i40e: fix multiple driver support")
Cc: stable@dpdk.org
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
This commit adds FDIR ID support to the AVX2 based receive
path routine. Support for both 16B and 32B descriptors is
implemented.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Tested-by: Mesut Ali Ergin <mesut.a.ergin@intel.com>
This commit adds an implementation to the SSE vector implementation of
RX routine and moves some common defines from a c file to the header
file.
I40e can have 16 and 32 byte descriptors, and the Flow
Director ID data and indication-bit are in different locations
for each size descriptor. The support is implemented in two
separate functions as they require vastly different operations.
The 16B descriptor re-purposes the "filter-status" u32 field
to indicate FDIR ID when the FLM bit is set. No extra loads
are required, however we do have to store to mbuf->fdir.hi,
which is not stored to in the RX path before this patch.
The 32B descriptor requires loading the 2nd 16 bytes of each
descriptor, to get the FLEXBH_STAT and FD Filter ID from
qword3. The resulting data must also be stored to mbuf->fdir.hi,
same as the 16B code path.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Tested-by: Mesut Ali Ergin <mesut.a.ergin@intel.com>
This commit adds a fdir_enable flag in a uint8_t sized hole
the rx queue structure The flag enables the rx code path to
easily identify if fdir is active. This can be used to skip
fdir id processing when it is not required.
The flag is zero by default (as rxq is zmalloc-ed at startup),
and the flag is set to 1 on configuration of a flow director rule.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Tested-by: Mesut Ali Ergin <mesut.a.ergin@intel.com>
This patch fixes (dereference after null check) coverity issue.
The address of first segmented packets was not set correctly during
reassembling packets which led to this issue.
Coverity issue: 343422, 343403
Fixes: ca74903b75 ("net/i40e: extract non-x86 specific code from vector driver")
Cc: stable@dpdk.org
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Xiao Zhang <xiao.zhang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
When configuring i40e rx queue, the temporary variable to store max
packet length is not big enough which leads to integer overflow issue.
This patch fixes the issue by removing the variable and using the
expression directly since the variable is only used once.
Fixes: 4861cde461 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Xiao Zhang <xiao.zhang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Retrieve burst mode options according to the selected Rx/Tx burst
function name.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
While meson always adds -Wall flag to C compiles, the make build adds extra
warning flags that are not present in the meson build. This addresses that
shortcoming by adding additional warning flags to our builds. The one
omission is the -Wcast-align flag, which though present in make gcc builds,
gives a lot of warnings/errors when used with clang.
The removed warning "-Wunused-parameter" is covered by the "-Wextra"
parameter so is unnecessary.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
To guarantee the orderings of successive stores to CIO and MMIO memory,
a lighter weight rte_io_wmb [1] can be used instead of rte_wmb, and since
the I40E_PCI_REG_WRITE API already has an inclusive rte_io_wmb, this
explicit call can be even saved.
[1] http://git.dpdk.org/dpdk/tree/lib/librte_eal/common/include/generic/
rte_atomic.h#n98
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The generic RTE_LOGTYPE_PMD is a historical relic and should
not be used. Every driver must dynamic log types.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
During PF/VF link update, a default speed value of 100M will be set
if get_link_info has failed or speed is unknown.
Consequently if PF is put in no-carrier state, VFs will switch to
"in carrier" state due to a link up + a link speed set to 100M
(default value if no speed detected).
To be consistent with linux drivers on which PF and VFs are in
same carrier state, sets default speed to undefined (instead of 100M)
and updates a link status of VF only if link is up and speed is
different from undefined.
Fixes: 4861cde461 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Laurent Hardy <laurent.hardy@6wind.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Set RTE_ETH_DEV_CLOSE_REMOVE upon probe so all the private resources
for the port can be freed by rte_eth_dev_close().
Signed-off-by: Chenxu Di <chenxux.di@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
PF driver supports counting VF adminQ messages. If any VF driver
sends much more adminQ messages to its PF driver in a period of
time, it will trigger the PF's message limitation, then in the
next certain amount of seconds the PF driver will ignore any new
adminQ message from that VF.
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Enabling/disabling of allmulticast mode is not always successful and
it should be taken into account to be able to handle it properly.
When correct return status is unclear from driver code, -EAGAIN is used.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Change return value of the callbacks from void to int. Make
implementations across all drivers return negative errno
values in case of error conditions.
Both callbacks are updated together because a large number of
drivers assign the same function to both callbacks.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Enabling/disabling of promiscuous mode is not always successful and
it should be taken into account to be able to handle it properly.
When correct return status is unclear from driver code, -EAGAIN is used.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Change eth_dev_infos_get_t return value from void to int.
Make eth_dev_infos_get_t implementations across all drivers to return
negative errno values if case of error conditions.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
When receiving the unsupported AQ messages, it's taken as an
error. It's not appropriate and triggers too much unnecessary print.
This commit is similar to
commit e130425300 ("net/i40e: downgrade unnecessary error log")
which made the same change for the PF instance.
Fixes: ae19955e7c ("i40evf: support reporting PF reset")
Cc: stable@dpdk.org
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
As packet length extraction code was simplified,the ordering
was not necessary any more.[1]
2% performance gain was measured on Marvell ThunderX2.
4.3% performance gain was measured on Ampere eMAG80
[1] http://mails.dpdk.org/archives/dev/2016-April/037529.html
Fixes: ae0eb310f2 ("net/i40e: implement vector PMD for ARM")
Cc: stable@dpdk.org
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Steve Capper <steve.capper@arm.com>
For x86, the descriptors needs to be loaded in order, so in between two
descriptors loading, there is a compiler barrier in place.[1]
For aarch64, a patch [2] is in place to survive with discontinuous DD
bits, the barriers can be removed to take full advantage of out-of-order
execution.
50% performance gain in the RFC2544 NDR test was measured on ThunderX2.
12.50% performance gain in the RFC2544 NDR test was measured on Ampere
eMAG80 platform.
[1] http://inbox.dpdk.org/users/039ED4275CED7440929022BC67E7061153D71548@
SHSMSX105.ccr.corp.intel.com/
[2] https://mails.dpdk.org/archives/stable/2017-October/003324.html
Fixes: ae0eb310f2 ("net/i40e: implement vector PMD for ARM")
Cc: stable@dpdk.org
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Steve Capper <steve.capper@arm.com>
I40evf queue can not work properly with kernel pf driver for X722 vf.
Eg. when configure 8 queues pair, only 4 queues can receive packets,
and half packets will be lost if using 2 queues pair.
This issue is caused by misconfiguration of look up table, the original
code of LUT configuration did not work for X722 vf, use aq command to
setup the LUT to make it work properly.
Fixes: cea7a51c17 ("i40evf: support RSS")
Cc: stable@dpdk.org
Acked-by: Beilei Xing <beilei.xing@intel.com>
Signed-off-by: Xiao Zhang <xiao.zhang@intel.com>
This patch fixes (dereference after null check) coverity issue.
The address of first segmented packets was not set correctly during
reassembling packets which led to this issue.
Coverity issue: 343422, 343403
Fixes: ca74903b75 ("net/i40e: extract non-x86 specific code from vector driver")
Cc: stable@dpdk.org
Signed-off-by: Xiao Zhang <xiao.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
This commit fixes an issue with the error checking in flow
MARK action. Previously, (ANY + MARK) would fail, as the
(mark_spec == 0) condition would cause an early error return,
however really it is (mark_spec != 0) that should cause the
early error return.
Flipping the binary comparison corrects the behaviour, and
(ANY + MARK) now succeeds, while (MARK + MARK) fails.
Fixes: 0bbcfc706a ("net/i40e: support MARK and RSS flow action")
Suggested-by: Harry van Haaren <harry.van.haaren@intel.com>
Signed-off-by: Mesut Ali Ergin <mesut.a.ergin@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: David Christensen <drc@linux.vnet.ibm.com>
This patch fixes X722 VF problem when received packet don't have
HASH value.
1) Packet classifier types update should support X722 VF, not only
for X722 PF;
2) MAC type is invalid for X722 VF when set packet classifier type,
so move it after MAC type is set correctly;
Fixes: a286ebeb07 ("net/i40e: add dynamic mapping of SW flow types to HW pctypes")
Cc: stable@dpdk.org
Signed-off-by: Peng Huang <peng.huang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When the VF configuration is larger than the number of queues reserved
by PF, VF sends the request queue command through admin queue. When PF
received this command, it may reset the VF and send a notification
before resetting. If this notification is read by the timed task alarm,
Task request queue will lost notification. This patch prevents two
tasks from running simultaneously.
Fixes: ee653bd800 ("net/i40e: determine number of queues per VF at run time")
Cc: stable@dpdk.org
Signed-off-by: Tao Zhu <taox.zhu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
We should tear down the fdir when the last flow is destroyed, current
logic is opposite to expected behavior, this patch fixes this issue.
Fixes: 2e67a7fbf3 ("net/i40e: config flow director automatically")
Cc: stable@dpdk.org
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
i40e FDIR doesn't allow to create flow with empty spec and mask for
ethertype pattern. Without this patch, below flow would be created
successfully which is unexpected.
> flow create 0 ingress pattern eth / end actions drop / end
Fixes: 7d83c152a2 ("net/i40e: parse flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
When NVM API version is 1.7 or above adminq operation to set TPID is
set as supported. This cause using adminq instead of registers.
For SFP X722 FW4.16, reported NVM API version is 1.8, and this cause
adminq operation to set as supported but it is not supported on FW4.16
Additional check added for SFP X722 to not enable adminq operation.
Fixes: 73cd7d6dc8 ("net/i40e: use set switch AQ instead of register setting")
Cc: stable@dpdk.org
Signed-off-by: Xiao Zhang <xiao.zhang@intel.com>
Reviewed-by: Haiyue Wang <haiyue.wang@intel.com>
Add return value check for i40e_vsi_delete_mac call in
rte_pmd_i40e_remove_vf_mac_addr as per coverity issue.
Coverity issue: 277224
Fixes: e0cb96204b ("net/i40e: add support for representor ports")
Cc: stable@dpdk.org
Signed-off-by: Herakliusz Lipiec <herakliusz.lipiec@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Replace rte_intr_enable() with rte_intr_ack() API
for acking an interrupt in interrupt handlers and
rx_queue_intr_enable() callbacks of PMD's.
This is inline with original intent of this change in PMDs
to ack interrupts after handling is completed if
device is backed by UIO, IGB_UIO or VFIO(with INTx).
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Shahed Shaikh <shshaikh@marvell.com>
Tested-by: Shahed Shaikh <shshaikh@marvell.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
The incriminated commit broke the use of RTE_PCI_DRV_IOVA_AS_VA which
was intended to mean "driver only supports VA" but had been understood
as "driver supports both PA and VA" by most net drivers and used to let
dpdk processes to run as non root (which do not have access to physical
addresses on recent kernels).
The check on physical addresses actually closed the gap for those
drivers. We don't need to mark them with RTE_PCI_DRV_IOVA_AS_VA and this
flag can retain its intended meaning.
Document explicitly its meaning.
We can check that a driver requirement wrt to IOVA mode is fulfilled
before trying to probe a device.
Finally, document the heuristic used to select the IOVA mode and hope
that we won't break it again.
Fixes: 703458e19c ("bus/pci: consider only usable devices for IOVA mode")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Tested-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
In i40e_flow_flush_fdir_filter, i40e_fdir_teardown is called, so
i40e_fdir_setup is required to be called before create a new fdir flow.
Bugzilla ID: 265
Fixes: 2e67a7fbf3 ("net/i40e: config flow director automatically")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Testpmd would stuck and result in core dump when user specifies an
invalid VF queue number, for example when setting txq or rxq to 0.
When txq or rxq is set to 0, pointer of pointer rxq or txq in
function i40evf_configure_vsi_queues is NULL. The usage of txq[i]
or rxq[0] is valid. This patch fixes this issue.
Fixes: d6b1972909 ("i40evf: support configurable crc stripping")
Cc: stable@dpdk.org
Signed-off-by: Andy Pei <andy.pei@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The default policy for offload-specific fields is that
they are undefined unless the corresponding offloads are
requested in mbuf ol_flags. This is also the case for outer
L2 and L3 length fields which must not be assumed to contain
zeros for non-tunnel packets. The patch clarifies this behaviour
in the comments and also adds appropriate checks to the PMDs which
do not check any tunnel-related offloads before using the said fields.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
If we don't clear mac_addrs, ethdev will double free it on cleanup.
Fixes: e16adf08e5 ("ethdev: free all common data when releasing port")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This driver was inserting its own stub for queue_stats_mapping which
did nothing but cause this device to return a different errno
than every other device driver. All devices that don't implement
queue stats mapping should return the same error.
Maybe the plan originally was to implement something, if that
ever happens, just put in the right code.
Fixes: 4861cde461 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
i40e and i40evf currently use two different names for the statistic on
dropped packets on the rx and tx sides.
Let's prefer i40evf so that all statistics are suffixed with _packets.
This also avoids a statistic name conflict in OVS.
Fixes: f4a91c38b4 ("i40e: add extended stats")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Initializes mark_spec pointer to NULL.
Coverity issue: 341075
Fixes: 0bbcfc706a ("net/i40e: support MARK and RSS flow action")
Signed-off-by: Mesut Ali Ergin <mesut.a.ergin@intel.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
Use of weak symbols can hide makefile errors especially when
custom makefiles are used. Removing the use of weak symbols
to avoid a stub function being linked in production code.
Signed-off-by: David Harton <dharton@cisco.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The device private pointer (dev_private) is of type void *
therefore no cast is necessary in C.
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
To improve code quality we want to turn on as many warnings as we can in
the DPDK code, so turn on the "unused-parameter" warning in meson builds to
match that of the make builds. To ensure correct compilation, disable the
warning selectively for driver base code that otherwise would have issues.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Since we change these macros, we might as well avoid triggering complaints
from checkpatch because of mixed case.
old=RTE_IPv4
new=RTE_IPV4
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"
old=RTE_ETHER_TYPE_IPv4
new=RTE_ETHER_TYPE_IPV4
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"
old=RTE_ETHER_TYPE_IPv6
new=RTE_ETHER_TYPE_IPV6
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
Currently, i40e Flow Director action parser only allows following nine
action combinations: (QUEUE, PASSTHRU, DROP, QUEUE + MARK, PASSTHRU +
MARK, DROP + MARK, QUEUE + FLAG, PASSTHRU + FLAG, DROP + FLAG)
Using the existing Cloud Filter profile on the NIC, it is possible to
add support for two more combinations as: (MARK + RSS, MARK + FLAG +
RSS)
Addition of these new combinations would allow more applications to
utilize DPDK rte_flow to implement hardware flow offloads with Intel
Ethernet 700 series network adapters, including but not limited to the
existing OVS DPDK partial hardware flow offload feature.
Signed-off-by: Mesut Ali Ergin <mesut.a.ergin@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Also rename arp_hrd, arp_pro, arp_hln, arp_pln and arp_op fields
to avoid conflict with the #defines in gnu libc.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tx desc's DD status is not cleaned by NIC automatically after packets
have been transmitted until software refill a new packet during next
loop. So when tx_free_thresh + tx_rs_thresh > nb_desc, it is possible
that an outdated DD status be checked as tx_next_dd, then segment fault
happen due to free a NULL mbuf pointer.
Then patch fixes this issue by
1. try to adapt tx_rs_thresh to an aggressive tx_free_thresh.
2. queue setup fail when tx_free_thresh + tx_rs_thresh > nb_desc
Fixes: 4861cde461 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Refuse to create the second RSS flow rule as only one RSS key and
HASH register for each PF port. Users should delete the first rule
before setup the second rule.
Fixes: ecad87d223 ("net/i40e: move RSS to flow API")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Tested-by: Wenjie Li <wenjiex.a.li@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
New PCI device ids are created to support X710/XXV710 of Intel FPGA
Programmable Acceleration card N3000, also called ipn3ke.
Signed-off-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
If disable LSC when launching testpmd with X722, shown
link speed is 20G but not 10G. It's caused by wrongly
parsed link speed.
Correct it according to X722 datasheet.
Fixes: eef2daf2e1 ("net/i40e: fix link update no wait")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
As flagged by coverity, the "info" structure is being explicitly
dereferenced before being checked later for a NULL value.
Coverity issue: 277241
Fixes: 98e60c0d43 ("net/i40e: add module EEPROM callbacks for i40e")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Rami Rosen <ramirose@gmail.com>
Coverity flags that the txq variable is used before it's checked for NULL.
Also fix typo in error message.
Coverity issue: 195023
Fixes: 24853544c8 ("net/i40e: fix mbuf free in vector Tx")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Rami Rosen <ramirose@gmail.com>
As stated in the deprecation notice from December 2016,
"the legacy filter API, including rte_eth_dev_filter_supported(),
rte_eth_dev_filter_ctrl() as well as filter types MACVLAN, ETHERTYPE,
FLEXIBLE, SYN, NTUPLE, TUNNEL, FDIR, HASH and L2_TUNNEL, is superseded
by the generic flow API (rte_flow)".
After a long wait of more than two years, the legacy filter API
is marked as deprecated, while still tested with testpmd and
the tep_termination example.
The next step will be to announce a deadline for complete removal.
As preparation of the removal of rte_eth_ctrl.h,
RTE_ETH_FLOW_*, RTE_TUNNEL_TYPE_* and RTE_ETH_HASH_FUNCTION_* definitions
are moved to rte_ethdev.h and rte_flow.h.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
When launch testpmd with VF and quit testpmd, there'll
be lots of messages "i40evf_handle_aq_msg(): Request 0
is not supported yet", which are triggered during VF
reset and VF needn't do anything. So cancel alarm handler
before VF reset to ignore the admin queue messages.
Fixes: e0e6a7f215 ("net/i40e: cancel alarm handler at the end of closure")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
No need to add additional vlan tag size for max packet size, since
for i40e, the queue's Rx Max Frame Size (rxq->max_pkt_len) already
includes the vlan header size.
Fixes: a3c83a2527 ("net/i40e: enable runtime queue setup")
Fixes: 4861cde461 ("i40e: new poll mode driver")
Fixes: c1715402df ("i40evf: fix jumbo frame support")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Add new protocol type VXLAN-GPE support for UDP tunnel.
inner IP/TCP/UDP checksum and RSS configuration shared
the same implementation of VXLAN.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Do a global replace of snprintf(..."%s",...) with strlcpy, adding in the
rte_string_fns.h header if needed. The function changes in this patch were
auto-generated via command:
spatch --sp-file devtools/cocci/strlcpy.cocci --dir . --in-place
and then the files edited using awk to add in the missing header:
gawk -i inplace '/include <rte_/ && ! seen { \
print "#include <rte_string_fns.h>"; seen=1} {print}'
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
For files that already have rte_string_fns.h included in them, we can
do a straight replacement of snprintf(..."%s",...) with strlcpy. The
changes in this patch were auto-generated via command:
spatch --sp-file devtools/cocci/strlcpy-with-header.cocci --dir . --in-place
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This commit sets the min and max supported MTU values for i40e VF
devices via the i40evf_dev_info_get() function. Min MTU supported
is set to ETHER_MIN_MTU and max MTU is calculated as the max packet
length supported minus the transport overhead.
Signed-off-by: Ian Stokes <ian.stokes@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This commit sets the min and max supported MTU values for i40e devices
via the i40e_dev_info_get() function. Min MTU supported is set to
ETHER_MIN_MTU and max mtu is calculated as the max packet length
supported minus the transport overhead.
Signed-off-by: Ian Stokes <ian.stokes@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
A log message is required when provided RSS key is
not valid so that driver will use the default RSS key.
Fixes: ecad87d223 ("net/i40e: move RSS to flow API")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
strcat does not check the destination length and there might be
chances of string overflow so instead of strcat, strlcat is used.
Fixes: 540a211084 ("bnx2x: driver core")
Fixes: e163c18a15 ("net/i40e: update ptype and pctype info")
Cc: stable@dpdk.org
Signed-off-by: Chaitanya Babu Talluri <tallurix.chaitanya.babu@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shahed Shaikh <shshaikh@marvell.com>
Time sync increment value is not configured for 25G device.
The patch fix this issue by setting the same value as 40G, this
aligned with kernel driver's behaviour.
Fixes: 75d133dd32 ("net/i40e: enable 25G device")
Cc: stable@dpdk.org
Reported-by: Michael Luo <michael.luo@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Tested-by: Michael Luo <michael.luo@intel.com>
Since rounding up the requested queue pairs to allow the VF to
request a non-aligned number was added, it may happen that the
requested number is less than the available num of queues but the
rounded up number is greater. In this case, it is not caught with
the usual checks but later when there is a reset and failed setup.
By rounding earlier the checks can be done before a failed reset
occurs, and a rounded max amount of available queues can be returned
to the VF.
Signed-off-by: Kevin Traynor <ktraynor@redhat.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Fix the check and associated log. Also, fix a typo in other log.
Fixes: 03d478e960 ("net/i40e: support PF respond VF request more queues")
Cc: stable@dpdk.org
Signed-off-by: Kevin Traynor <ktraynor@redhat.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
1. Fix the lldp stop condition check - for firmware
versions 6.01(for X710)/3.33(for X722) or later we need stop the lldp
2. deferred stats reset in dev_init to avoid some noise be counted.
3. Document known issue for tx bytes decreasing due to link status change
Fixes: 044846f071 ("net/i40e: stop LLDP before setting local LLDP MIB")
Cc: stable@dpdk.org
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
DCB is not necessary to be configured if no user priority of
queue region is requested.
Unexpected configuration of DCB will cause unexpected behavior, like
FDIR does not work on those queues, but could cause more issues.
Fixes: 7cbecc2f74 ("net/i40e: support queue region set and flush")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Before this patch, VF must request a specific queues(1/2/4/8/16) with
DPDK PF. This patch align the number of requested queues to next power
of 2. So VF can request any number queues from 1 to 16.
Signed-off-by: Zhirun Yan <zhirun.yan@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
i40e_aq_set_rss_lut should set register according
to the vsi->type. if not, VF may overwrite the rigister
of PF.
Note, only X722 is impacted, since flag I40E_FLAG_RSS_AQ_CAPABLE
is only enabled on X722.
Fixes: d0a349409b ("i40e: support AQ based RSS config")
Cc: stable@dpdk.org
Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Do the VF message basic validation such as OPCODE message length check,
some special OPCODE message format check, to protect the i40e PMD from
malicious VF message attack.
Fixes: 4861cde461 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
rte_eth_dev_rss_hash_conf_get API doesn't force 'rss_conf.rss_key'
to be not NULL, so rss_key = NULL should be alllowed in i40e
driver.
Fixes: 16321de093 ("ethdev: allow to get RSS hash functions and key")
Cc: stable@dpdk.org
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch respond the VIRTCHNL_OP_REQUEST_QUEUES msg from VF, and
process to allocated more queues for the requested VF. If successful,
PF will notify VF to reset. If unsuccessful, PF will send message to
inform VF.
Signed-off-by: Zhirun Yan <zhirun.yan@intel.com>
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Before this patch, VF gets a default number of queues from the PF.
This patch enables VF to request a different number. When VF configures
more queues, it will send VIRTCHNL_OP_REQUEST_QUEUES to PF to request
more queues, if success, PF will reset the VF.
User can run "port stop all", "port config port_id rxq/txq queue_num"
and "port start all" to reconfigure queue number.
Signed-off-by: Zhirun Yan <zhirun.yan@intel.com>
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
While calculating the input packet count per port, discarded packets
should be reduced, right now only PF VSI discarded packets are reduced.
But while calculating the input byte count per port, Rx byte count is
used, which should take all discarded packets into account, including
VF VSI ones.
This will cause inconsistency in stat counters in some cases.
This patch would take all VSI stats as packet and byte count to address
the issue.
Fixes: 763de290cb ("net/i40e: fix packet count for PF")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The reset flags vf->vf_reset and vf->pend_msg are set when VF received
VIRTCHNL_EVENT_RESET_IMPENDING. So after resetting done, these flags
should be cleared.
Fixes: 8cacf78469 ("net/i40e: fix VF initialization error")
Cc: stable@dpdk.org
Signed-off-by: Zhirun Yan <zhirun.yan@intel.com>
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Before this patch, there are two functions will call
i40e_dev_free_queues to free queues. For rte_eth_dev_close(), its
redundant because of duplication. For rte_eth_dev_reset() its
redundant because of not necessary, since following dev_configure
is required after dev_reset and it will be updated correctly.
This patch removes redundant code in i40e_dev_free_queues().
Fixes: 6b45371283 ("i40e: free queue memory when closing")
Cc: stable@dpdk.org
Signed-off-by: Zhirun Yan <zhirun.yan@intel.com>
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This reverts
commit 09a62d7569 ("net/i40e: fix offload not supported mask")
Contrary to what is said in above patch commit log,
I40E_TX_OFFLOAD_NOTSUP_MASK is the mask of Tx offload bits that are part
of PKT_TX_OFFLOAD_MASK but not included in I40E_TX_OFFLOAD_MASK.
Above patch erroneously includes all PKT_RX_OFFLOAD_ bits in the
I40E_TX_OFFLOAD_NOTSUP_MASK, this is not what is expected.
Restore the initial xor that gives the expected result.
Fixes: 09a62d7569 ("net/i40e: fix offload not supported mask")
Cc: stable@dpdk.org
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Port reset will call i40evf_uninit_vf() to release resource. It wants
to call i40evf_dev_close() to release resources. Before this patch,
hw->adapter_stopped was used to mark the status about start/stop and
close. So it will never call i40evf_dev_close() after stopping the port.
This patch added hw->adapter_closed flag in i40evf_dev_close() and
i40e_dev_close() to control the status of close.
Fixes: 4861cde461 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Zhirun Yan <zhirun.yan@intel.com>
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When starting the device, the RSS table is initialized. So the RSS
update before dev_start would be overwritten. This patch allows users
to update the RSS reta table before dev_start and adjusts the order
to set entries sequentially.
Fixes: 4861cde461 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Device can't function properly with a firmware that is in recovery
mode.
Check the firmware status at initialization time. If the firmware is
in recovery mode, alert the user to check it.
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
RSS hash configure get API (i40e_dev_rss_hash_conf_get()) didn't check
the return value of i40e_get_rss_key().
i40e_dev_rss_hash_conf_get() will return success even getting RSS hash
key failed. This patch fixes the issue.
Fixes: d0a349409b ("i40e: support AQ based RSS config")
Cc: stable@dpdk.org
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
DCR is Intel internal information, no need to be in public code.
Fixes: de2cd512b1 ("net/i40e/base: new AQ commands for cloud filter")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
The assignment should be done after initialization, or it will be zero.
Fixes: 264b23e3d2 ("net/i40e: add parameter check for RSS flow init")
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
There's an issue that X710 can't receive any packet after
reading some special registers. That's because these
registers are only valid for X722, read access for non-X722
will cause ECC error.
Fixes: d9efd0136a ("i40e: add EEPROM and registers dumping")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
There need an parameter check for RSS flow init, or it may cause
core dump if pointer is NULL in memory copy.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Previously, there is instability during vector Rx if descriptor
number is not power of 2, e.g. process hang and some Rx packets
are unexpectedly empty. That's because vector Rx mode assumes Rx
descriptor number is power of 2 when doing bit mask.
This patch allows vector mode only when the number of Rx descriptor
is power of 2.
Fixes: 8e109464c0 ("i40e: allow vector Rx and Tx usage")
Fixes: a3c83a2527 ("net/i40e: enable runtime queue setup")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Just as the name I40E_TX_OFFLOAD_NOTSUP_MASK indicates, it should be the
mask of unsupported features (either not in PKT_TX_OFFLOAD_MASK or in
I40E_TX_OFFLOAD_MASK), however, xor will not get desired result here,
assume bit 0 of PKT_TX_OFFLOAD_MASK and I40E_TX_OFFLOAD_MAKS are 0 which
means corresponding feature is not supported in both sides, then we get
value of bit 0 of I40E_TX_OFFLOAD_NOTSUP_MASK which is 0 via xor, it
implies that it is supported which doesn't meet our expectation.
Correct it by a NOT-AND operation.
Fixes: 3f33e643e5 ("net/i40e: add Tx preparation")
Cc: stable@dpdk.org
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Some global variables can indeed be static, add static keyword to them.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
NICs uses different delays up to a second during their
configuration. It makes no sense to busy-wait so long wasting
CPU cycles and preventing any other threads to execute on the
same CPU core. These busy polling are the rudiments that came
from the kernel drivers where you can not sleep in interrupt
context, but as we're in userspace, we're able and should
sleep to allow other threads to run.
Delays never called on rx/tx path, so this should not affect
performance.
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tx offload mask is updated in following commit:
commit 1037ed842c ("mbuf: fix Tx offload mask").
Currently, the new added offload flags are not supported in PMD
and application will fail to call PMD transmit prepare function.
This patch updates PMD Tx offload mask.
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Some operations in i40evf_dev_close like i40evf_dev_promiscuous_disable
still need alarm handler to clear the pending cmd, if alarm handler is
canceled in early stage of i40evf_dev_close,
i40evf_dev_promiscuous_disable will result in failure.
Fixes: 864a800d70 ("net/i40e: remove VF interrupt handler")
Cc: stable@dpdk.org
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
In FVL, there was an issue and it didn't support the loopback function
before FW 5.0. For FPK (X722) it should work.
So it needs to distinguish between the devices by checking MAC type.
Fixes: 689bba3327 ("i40e: add VEB switching support")
Fixes: bce83974ba ("net/i40e: set Tx loopback from PF")
Cc: stable@dpdk.org
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The representor id is added in rte_eth_dev_data in order to be able
to match a port with its representor id in devargs.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
This is a clean-up of common ethdev data freeing.
All data freeing are moved to rte_eth_dev_release_port()
and done only in case of primary process.
It is probably fixing some memory leaks for PMDs which were
not freeing all data.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Promisc should not be disabled if the all multicast mode is enabled.
Patch keeps the promiscuous on if all multicast mode is on, this
behavior is also consistent with the implementation done on ixgbe
pmd.
Cc: stable@dpdk.org
Signed-off-by: Huaibin Wang <huaibin.wang@6wind.com>
Signed-off-by: Laurent Hardy <laurent.hardy@6wind.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
eal: add shorthand __rte_weak macro
qat: update code to use __rte_weak macro
avf: update code to use __rte_weak macro
fm10k: update code to use __rte_weak macro
i40e: update code to use __rte_weak macro
ixgbe: update code to use __rte_weak macro
mlx5: update code to use __rte_weak macro
virtio: update code to use __rte_weak macro
acl: update code to use __rte_weak macro
bpf: update code to use __rte_weak macro
Signed-off-by: Keith Wiles <keith.wiles@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The PCI mapping requires to know the PCI driver to use,
even before the probing is done. That's why the PCI driver is
referenced early inside the PCI device structure. See
commit 1d20a073fa ("bus/pci: reference driver structure before mapping")
However the rte_driver does not need to be referenced in rte_device
before the device probing is done.
By moving back this assignment at the end of the device probing,
it becomes possible to make clear the status of a rte_device.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Tested-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Update implementation that when PKT_RX_QINQ_STRIPPED mbuf ol_flags
set by PMD, PKT_RX_QINQ, PKT_RX_VLAN_STRIPPED & PKT_RX_VLAN
should be also set.
Clarify mbuf documentations that when PKT_RX_QINQ set PKT_RX_VLAN also
should be set.
So that appllication can rely on PKT_RX_QINQ flag to access both
mbuf.vlan_tci & mbuf.vlan_tci_outer
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
I40e driver needed users to config exact fdir mode to create rte_flow
rules but it shouldn't. This patch allows users to create rte_flow rules
without configuring fdir mode and let the driver config fdir automatically.
And remove the workaround in flow filtering example.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Since rte_intr_enable is called at init and start time. Remove it in
interrupt_action function to avoid too many system calls.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
There is a new set of TR bits that can be used when replacing
the cloud filters so add them in. Also added a check to make
sure that the replace cloud filters AQ command doesn't get
executed on an X722 since it is not supported there.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Andrey Chilikin <andrey.chilikin@intel.com>
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add HW capability flag to indicate that firmware supports stopping
LLDP agent. This feature has been added in FW API 1.7 for XL710
devices and 1.6 for X722. Also raise expected minor version number
for X722 FW API to 6.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
These two functions are currently only used in the LED get/set
functions, which are not apart of the VF driver. So the
i40e_aq_set/get_phy_register functions should be wrapped so they
can be removed from the VF driver.
This was brought up in the Linux community that these functions in
the VF driver had no callers in the tree, so they should be removed.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Carlsville Device use 10GBASE-T/1GBASE-T PHY with additional support
for 5GBASE-T/2.5GBASE-T.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This patch adds the default value for Flow Control Refresh Threshold
to set_mac_config AdminQ command. Previously, calling this AdminQ
command would overwrite the default value with 0.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
During switching between old NVM structure approach (called
structured NVM) to new one (called flat NVM) or backward flash
needs to be rearranged to required NVM structure.
This is a part of transition from one NVM structure to another.
The function is introduced to command firmware to start
rearrangement process.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Firmware can return a busy state, so the i40e_asq_send_command will
return I40E_ERR_NOT_READY.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add new field - command flags with only one flag for now. Added flag
tells FW that it shouldn't change page while accessing QSFP module,
as it was set manually.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The wait time for Global Reset Ready steady state is calculated based on
the GLGEN_RSTCTL.GRSTDEL value. However, current impelementation multiplied
that value by 20 as a workaround for an issue in SOC platforms.
This resulted in the maximum GLGEN_RSTCTL.GRSTDEL timeout of 6.5 seconds
becoming 130 seconds, which is so long that the VMkernel watchdog thinks
the kernel is frozen and triggers a PSOD.
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Allocated resources were not freed in the event of failure in
i40e_init_asq function. This patch gracefully handles all failures.
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Allocated resources were not freed in the event of a failure in
i40e_init_lan_hmc function. This patch gracefully handles the fail
case after initializing the lan hmc.
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The NVM is in little endian so when we read from it we need to do
the correct thing for the endianness of the machine.
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This patch fixes the polling mechanism of GLGEN_RSTAT.DEVSTATE
in the PF Reset path when Global Reset is in progress.
While the driver is polling for the end of the PF Reset and
the Global Reset is triggered, abandon the PF Reset path and
prepare for the upcoming Global Reset.
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This patch enables tc-flower based hardware offloads. tc flower
filter provided by the kernel is configured as driver specific
cloud filter. The patch implements functions and admin queue
commands needed to support cloud filters in the driver and
adds cloud filters to configure these tc-flower filters.
Also it cover below API renaming for code clean.
- i40e_aq_add_cloud_filters_big_buffer to
i40e_aq_add_cloud_filters_bb
- i40e_aq_remove_cloud_filters_big_buffer to
i40e_aq_rem_cloud_filters_bb
- i40e_aq_remove_cloud_filters to
i40e_aq_rem_cloud_filters
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add new admin queue definitions and extended fields for cloud
filter support. Define big buffer for extended general fields
in Add/Remove Cloud filters command.
Also rename i40e_aqc_add_remove_cloud_filters_element_data to
i40e_aq__cloud_filters_element_data.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add definitions for L4 filters and switch modes based on cloud filters
modes and extend the set switch config command to include the additional
cloud filter mode.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This patch overwrites number of ports for X722 devices with support for
OCP PHY mezzanine. The old method with checking if port is disabled in
the PRTGEN_CNF register cannot be used in this case. When the OCP is
removed, ports were seen as disabled, which resulted in wrong calculation
of partition id, that caused WoL to be disabled on certain ports.
Fixes: 3c89193a36 ("i40e/base: support WOL config for X722")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
We should not issue Admin Queue command before Admin Queue is initialized.
But this happened in i40e_hw_init and i40e_filter_input_set_init.
The patch fixes the issue by proper reordering.
Fixes: b6a0ec4182 ("i40e: use AQ for Rx control register read/write")
Cc: stable@dpdk.org
Reported-by: Anand Rawat <anand.rawat@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
In former API, ETH_TXQ_FLAGS_NOMULTSEGS was merely a hint indicating
that application will never send multisegmented packets, allowing
pmd to choose different tx methods accordingly.
In new API, DEV_TX_OFFLOAD_MULTI_SEGS became an offload capability
that is advertised by pmds, some of them do not advertise it and
expect to never receive fragmented packets (octeontx, axgbe)
So an ethdev that supports multisegmented packets should properly
advertise it.
Problem was spotted and tested on e1000, should be also present in
i40e_vf representor.
Fixes: e0cb96204b ("net/i40e: add support for representor ports")
Cc: stable@dpdk.org
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The driver setting of "allow_experimental_apis" was not being used when
building the base code. To allow this we can manually put in a check
in the base code files for the setting and set the appropriate cflag
if it's needed.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Tested-by: Ilya Maximets <i.maximets@samsung.com>
Remove driver log when no interrupt event indicated
in alarm handler for both PF and VF, otherwise there
will be lots of prints which makes console unusable.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
For IA, the AVX2 vector path is only recommended to be used on later
platforms (identified by AVX512 support, like SKL etc.) This is because
performance benchmark shows downgrade when running AVX2 vector path on
early platform (BDW/HSW) in some cases. But we still observe perf gain
with some real work loading.
So this patch introduced the new devarg use-latest-supported-vec to
force the driver always selecting the latest supported vec path. Then
apps are able to take AVX2 path on early platforms. And this logic can
be re-used if we will have AVX512 vec path in future.
This patch only affects IA platforms. The selected vec path would be
like the following:
Without devarg/devarg = 0:
Machine vPMD
AVX512F AVX2
AVX2 SSE4.2
SSE4.2 SSE4.2
<SSE4.2 Not Supported
With devarg = 1
Machine vPMD
AVX512F AVX2
AVX2 AVX2
SSE4.2 SSE4.2
<SSE4.2 Not Supported
Other platforms can also apply the same logic if necessary in future.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This PMD is built with -Wno-format, which means GCC errors out if
-Wformat-security is used.
Fixes: e940646b20 ("drivers/net: build Intel NIC PMDs with meson")
Cc: stable@dpdk.org
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Comments says "no csum error report support" but there is no check
related csum offloads. Removing the comment.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Removed DEV_RX_OFFLOAD_CRC_STRIP offload flag.
Without any specific Rx offload flag, default behavior by PMDs is to
strip CRC.
PMDs that support keeping CRC should advertise DEV_RX_OFFLOAD_KEEP_CRC
Rx offload capability.
Applications that require keeping CRC should check PMD capability first
and if it is supported can enable this feature by setting
DEV_RX_OFFLOAD_KEEP_CRC in Rx offload flag in rte_eth_dev_configure()
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Jan Remes <remes@netcope.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
>From the Intel Ethernet Controller X710/XXV710/XL710 Specification
Update:
Starting from NVM 5.02, if the Set Local LLDP MIB command is
received while the DCBx specific agent is stopped, the command
returns an EPERM error. If the command is received while the
LLDP agent is stopped, it sets the local MIB without exchanging
LLDP with peer, and returns SUCCESS.
This results in the harmless, but annoying, diagnostic:
default dcb config fails. err = -53, aq_err = 1.
So, if possible (older firmwares cannot safely stop LLDP), stop the
LLDP daemon when we are in software mod before we attempt to call
i40e_set_dcb_config.
Signed-off-by: Chas Williams <chas3@att.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch adds alarm handler, and then i40e
PF will use alarm handler instead of interrupt
handler when device is started and Rx interrupt
mode is disabled. This way will save CPU cycles
during receiving packets.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This reverts commit 7546dc4a13.
In i40e FDIR PMD code for checking programming status,
when the action of add FDIR filter is ok, i40e NIC will
not write back to programming status descriptor, so if
PMD code check DD is not done after period of time dealy,
it means the add or remove filter action is ok. It only write
back descriptor when fail. So, there is no issue for the original
code.
Fixes: 7546dc4a13 ("net/i40e: fix check of flow director programming status")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This commit fixes an infinite loop bug that could occur
if the i40e AVX2 driver is used, and high traffic rates
cause the mempool from which the rxq pulls mbufs to become
empty.
The result would be an infinite loop of checking if we
should perform an rx rearm, calling the function and an
error return due the the mempool being emtpy.
The fix is to align the code in the AVX2 driver with the
SSE driver, where an if() is used instead of a while(),
allowing the thread to return from i40e rx function even
if the mempool is empty.
Fixes: dafadd7376 ("net/i40e: add AVX2 Rx function")
Cc: stable@dpdk.org
Reported-by: David Coyle <david.coyle@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Brendan Ryan <brendan.ryan@intel.com>
Tested-by: David Coyle <david.coyle@intel.com>
There's parsing error when using device argument
support-multi-driver or queue-num-per-vf or both.
Error log is "PMD: Error parsing device, invalid
key <support-multi-driver>" and "PMD: Error parsing
device, invalid key <queue-num-per-vf>". The root
cause is that device argument will be parsed in
different parsing functions with local valid key .
This patch fixes the issue by combine all supported
arguments's valid keys.
Fixes: cfdfca493c ("net/i40e: fix multiple driver support")
Fixes: ee653bd800 ("net/i40e: determine number of queues per VF at run time")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
remove queue id checks from dev_ops
i40e_dev_[rx/tx]_queue_[start/stop]
i40evf_dev_[rx/tx]_queue_[start/stop]
queue id checks already done by ethdev APIs that are calling these
dev_ops
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
In i40e FDIR PMD code for checking programming status
function i40e_check_fdir_programming_status(), the initial value
of return value ret should be set to -1 not 0, because if DD bit of
I40E_RX_DESC_STATUS_DD is not write back, this function will return
0 to upper function, this give an error info to upper function, the
fact for this is it is time out for DD write back and it should return
-1.
Fixes: 05999aab4c ("i40e: add or delete flow director")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When link needs to go up, I40E_AQ_PHY_AN_ENABLED is always be set in DPDK.
So all speeds are always set. This causes speed config never works.
This patch fixes this issue and only allows to set available speeds. If
link needs to go up and speed setting is not supported, it will print
warning and set default available speeds. And when link needs to go down,
link speed field should be set to non-zero to avoid link down issue when
binding back to kernel driver.
Fixes: ca7e599d45 ("net/i40e: fix link management")
Fixes: 1bb8f66116 ("net/i40e: fix link down and negotiation")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Currently, i40e_dev_tx_queue_setup_runtime checks simple tx and treats
mbuf fast free offloading as No-simple, which is classified as simple tx
in i40e_set_tx_function_flag. This inconsistent behavior causes tx queue
setup fail after queue was stopped. This patch fixes this bug.
Fixes: 399421100e ("net/i40e: fix missing mbuf fast free offload")
Cc: stable@dpdk.org
Signed-off-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
TPID can be set by set_switch_config AdminQ command on
new FW release. But find fail to set 0x88A8 on some NICs.
According to the datasheet, Switch Tag value should not
be identical to either the First Tag or Second Tag values.
So set something other than common Ethertype for internal
switching.
Fixes: 73cd7d6dc8 ("net/i40e: use set switch AQ instead of register setting")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
To parse packet type correctly, profile needs to be
loaded again to update tables in SW even if profile
has exited. But previously packet type parser will
be false after loading profile when profile already
exists.
This patch fixes the issue.
Fixes: 0585f5c3d2 ("net/i40e: fix DDP profile DEL operation")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Tested-by: Xueqin Lin <xueqin.lin@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Since PPPoL2TP profile is updated, PPPoL2TP packet type
parser will be false with the current parser function.
This patch fixes the issue.
Fixes: 11556c915a ("net/i40e: improve packet type parser")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Tested-by: Xueqin Lin <xueqin.lin@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
A constructor is usually declared with RTE_INIT* macros.
As it is a static function, no need to declare before its definition.
The macro is used directly in the function definition.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
For i40evf, internal rx interrupt and adminq interrupt share the same
source, that cause a lot cpu cycles be wasted on interrupt handler
on rx path. This is complained by customers which require low latency
(when set I40E_ITR_INTERVAL to small value), but have to be sufferred by
tremendous interrupts handling that eat significant CPU resources.
The patch disable pci interrupt and remove the interrupt handler,
replace it with a low frequency (50ms) interrupt polling daemon
which is implemented by registering a alarm callback periodly, this
save CPU time significently: On a typical x86 server with 2.1GHz CPU,
with low latency configure (32us) we saw CPU usage from top commmand
reduced from 20% to 0% on management core in testpmd).
Also with the new method we can remove compile option: I40E_ITR_INTERVAL
which is used to balance between low latency and low CPU usage previously.
Now we don't need it since we can reach both at same time.
Suggested-by: Jingjing Wu <jingjing.wu@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
DEV_RX_OFFLOAD_KEEP_CRC offload flag is added. PMDs that support
keeping CRC should advertise this offload capability.
DEV_RX_OFFLOAD_CRC_STRIP flag will remain one more release
default behavior in PMDs are to keep the CRC until this flag removed
Until DEV_RX_OFFLOAD_CRC_STRIP flag is removed:
- Setting both KEEP_CRC & CRC_STRIP is INVALID
- Setting only CRC_STRIP PMD should strip the CRC
- Setting only KEEP_CRC PMD should keep the CRC
- Not setting both PMD should keep the CRC
A helper function rte_eth_dev_is_keep_crc() has been added to be able to
change the no flag behavior with minimal changes in PMDs.
The PMDs that doesn't report the DEV_RX_OFFLOAD_KEEP_CRC offload can
remove rte_eth_dev_is_keep_crc() checks next release, related code
commented to help the maintenance task.
And DEV_RX_OFFLOAD_CRC_STRIP has been added to virtual drivers since
they don't use CRC at all, when an application requires this offload
virtual PMDs should not return error.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
At this point valid data is already set by rte_eth_get_device_info.
device field becomes zero and consumer is not able to retrieve pci data.
Fixes: 4861cde461 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Damjan Marion <damarion@cisco.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Some illegal packets will lead to TX/RX hang and
can't recover automatically. This patch check those
illegal packets and protect TX/RX from hanging.
Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The GL_SWR_PM_UP_THR value is not impacted from the link speed, its
value is set according to the total number of ports for a better
pipe-monitor configuration.
All bellowing relevant device IDs are considered (NICs, LOMs, Mezz
and Backplane):
Device-ID Value Comments
0x1572 0x03030303 10G SFI
0x1581 0x03030303 10G Backplane
0x1586 0x03030303 10G BaseT
0x1589 0x03030303 10G BaseT (FortPond)
0x1580 0x06060606 40G Backplane
0x1583 0x06060606 2x40G QSFP
0x1584 0x06060606 1x40G QSFP
0x1587 0x06060606 20G Backplane (HP)
0x1588 0x06060606 20G KR2 (HP)
0x158A 0x06060606 25G Backplane
0x158B 0x06060606 25G SFP28
Fixes: c9223a2bf5 ("i40e: workaround for XL710 performance")
Fixes: 75d133dd32 ("net/i40e: enable 25G device")
Cc: stable@dpdk.org
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The summarized global register change info will be logged
no matter if there's real global register change. Since
only real changes are logged now, there's no need to
summarize global register change info, otherwise will
cause misunderstanding.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Currently no matter if there's global change, the global
configuration will be always logged. But there's no value
to log the info if the configuration is not changed.
This patch prints only real global changes.
Also, change log level from DEBUG to WARNING.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Cppcheck reports following error,
(error) Shifting 32-bit value by 36 bits is undefined behaviour
According to datasheet, there's PHY type and PHY type extension
in setting PHY config command, should exclude PHY type extension
when setting PHY type.
Fixes: 1bb8f66116 ("net/i40e: fix link down and negotiation")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch fixes link status update problem in interrupt mode.
Previously, directly reading link status register instead of
accessing via admin queue command may cause the link status
change interrupt callback inactive. This patch fixes the
problem by making the driver only read the register in
"no wait" and polling mode.
Bugzilla ID: 54
Fixes: eef2daf2e1 ("net/i40e: fix link update no wait")
Cc: stable@dpdk.org
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Tested-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Cleanup remain dependency on old rxmode flags since we move to
new offload APIs.
Fixes: c3ac7c5b0b ("net/i40e: convert to new Rx offloads API")
Fixes: e0cb96204b ("net/i40e: add support for representor ports")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Following error reported by cppcheck:
(error) Shifting signed 32-bit value by 31 bits is
undefined behaviour. The patch fixes it.
Fixes: 8db9e2a1b2 ("i40e: base driver")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The resetting of stats on a VF involves the setting of an offset
that is subtracted from future calls, rather zeroing of counters.
However doing a stats reset on the port representor was also
adjusting the values forwarded to the VF, which had the effect of
corrupting the VF's counters. The fix is for the port representor
to maintain its own stats offset, so the port representor and VF
maintain independently-resettable counters.
Fixes: e0cb96204b ("net/i40e: add support for representor ports")
Signed-off-by: Remy Horton <remy.horton@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
If flow director is enabled, FDIR Tx queue can't
be disabled when exiting application. Root cause
is FDIR Tx queue is not disabled before removing
HMC backing store.
Fixes: 71d35259ff ("i40e: tear down flow director")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch adds Rx and Tx burst functions to the i40e Port
Representors, so that the implementation within this PMD
can be tested using applications such as testpmd which
require data-path functionality.
Fixes: e0cb96204b ("net/i40e: add support for representor ports")
Signed-off-by: Remy Horton <remy.horton@intel.com>
Acked-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
Currently, only new value is printed during global
register change. Add original value to help debugging
facility.
Fixes: bc66b9717c ("net/i40e: add debug logs when writing global registers")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
VLAN offload capability should be exposed in VF
since i40e does support it.
Fixes: c3ac7c5b0b ("net/i40e: convert to new Rx offloads API")
Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Expose the missing mbuf fast free capability since i40 does
support it.
Fixes: 7497d3e2f7 ("net/i40e: convert to new Tx offloads API")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Global register change info during enabling
flexible payload is not printed.
This patch changes macro to print the global
register change info.
Fixes: d2f9fe8ae3 ("net/i40e: turn off flexible payload on driver init")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Link status is not updated correctly, link speed is 0
when link is up and link speed is not 0 when link is
down. This patch fixes the issue.
Fixes: eef2daf2e1 ("net/i40e: fix link update no wait")
Cc: stable@dpdk.org
Signed-off-by: Keith Wiles <keith.wiles@intel.com>
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
This patch check if a input requested offloading is valid or not.
Any reuqested offloading must be supported in the device capabilities.
Any offloading is disabled by default if it is not set in the parameter
dev_conf->[rt]xmode.offloads to rte_eth_dev_configure() and
[rt]x_conf->offloads to rte_eth_[rt]x_queue_setup().
If any offloading is enabled in rte_eth_dev_configure() by application,
it is enabled on all queues no matter whether it is per-queue or
per-port type and no matter whether it is set or cleared in
[rt]x_conf->offloads to rte_eth_[rt]x_queue_setup().
If a per-queue offloading hasn't be enabled in rte_eth_dev_configure(),
it can be enabled or disabled for individual queue in
ret_eth_[rt]x_queue_setup().
A new added offloading is the one which hasn't been enabled in
rte_eth_dev_configure() and is reuqested to be enabled in
rte_eth_[rt]x_queue_setup(), it must be per-queue type,
otherwise trigger an error log.
The underlying PMD must be aware that the requested offloadings
to PMD specific queue_setup() function only carries those
new added offloadings of per-queue type.
This patch can make above such checking in a common way in rte_ethdev
layer to avoid same checking in underlying PMD.
This patch assumes that all PMDs in 18.05-rc2 have already
converted to offload API defined in 17.11 . It also assumes
that all PMDs can return correct offloading capabilities
in rte_eth_dev_infos_get().
In the beginning of [rt]x_queue_setup() of underlying PMD,
add offloads = [rt]xconf->offloads |
dev->data->dev_conf.[rt]xmode.offloads; to keep same as offload API
defined in 17.11 to avoid upper application broken due to offload
API change.
PMD can use the info that input [rt]xconf->offloads only carry
the new added per-queue offloads to do some optimization or some
code change on base of this patch.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
MULTI_SEGS and JUMBO_FRAME offload capability should be exposed
both VF and PF since i40e does support it.
Fixes: c3ac7c5b0b ("net/i40e: convert to new Rx offloads API")
Fixes: 7497d3e2f7 ("net/i40e: convert to new Tx offloads API")
Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
In scenario of Kernel Driver runs on PF and PMD runs on VF, PMD exit
doesn't disable promiscuous mode, this will cause vlan filter set by
Kernel Driver will not take effect.
This patch will fix it, add promiscuous disable at device disable.
Signed-off-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
For non-AVX builds, the cflags used for compiling the i40e driver files
are not passed to the call to build the AVX-specific code path. This can
cause build failures.
../drivers/net/i40e/i40e_ethdev.h:888:42: error: ‘I40E_PFQF_HKEY_MAX_INDEX’ undeclared here (not in a function)
Fixes: e940646b20 ("drivers/net: build Intel NIC PMDs with meson")
Reported-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Since we move to new offload APIs, txq_flags is no long needed.
This patch remove the dependence on that.
Fixes: 7497d3e2f7 ("net/i40e: convert to new Tx offloads API")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
The Tx function selection code in the driver only used the older txq
flags values to check whether the scalar or vector functions should be
used. This caused performance regressions with testpmd io-fwd as the
scalar path rather than the vector one was being used in the default
case. Fix this by changing the code to take account of new offloads and
deleting the defines used for the old ones.
Fixes: 7497d3e2f7 ("net/i40e: convert to new Tx offloads API")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Changes introduced by e0cb96204b modified the default name generated
for the i40e PF PMD, this patch reverts the default name to the
original PCI BDF.
Fixes: e0cb96204b ("net/i40e: add support for representor ports")
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Missing "return -ENOTSUP" will always lead to illegal offload
passing through offload checking.
Fixes: 7497d3e2f7 ("net/i40e: convert to new Tx offloads API")
Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
JUMBO_FRAME offload capability should be exposed since i40e
does support it
Fixes: c3ac7c5b0b ("net/i40e: convert to new Rx offloads API")
Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add support for virtual function representor ports to the i40e PF
driver. When SR-IOV virtual functions devices are enabled a
corresponding representor port for each VF can be enabled, in the
process in which the i40e PMD is running, by specifying the
representor devargs with the list of VF ports that representors
are to be created for.
An example of the devargs which would create VF representor for virtual
functions 0,2,4,5,6 and 7 is:
-w DBDF,representor=[0,2,4-7]
and to just specify a single representor on virtual function 3 (switch
port id):
-w DBDF,representor=3
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
Signed-off-by: Remy Horton <remy.horton@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Contrary to all other pattern items, these are inconsistently documented as
affecting traffic instead of simply matching its origin, without provision
for the latter.
This commit clarifies documentation and updates PMDs since the original
behavior now has to be explicitly requested using the new transfer
attribute.
It breaks ABI compatibility for the following public functions:
- rte_flow_create()
- rte_flow_validate()
Impacted PMDs are bnxt and i40e, for which the VF pattern item is now only
supported when a transfer attribute is also present.
Fixes: b1a4b4cbc0 ("ethdev: introduce generic flow API")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This new attribute enables applications to create flow rules that do not
simply match traffic whose origin is specified in the pattern (e.g. some
non-default physical port or VF), but actively affect it by applying the
flow rule at the lowest possible level in the underlying device.
It breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_validate()
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
TPID handling in rte_flow VLAN and E_TAG pattern item definitions is not
consistent with the normal stacking order of pattern items, which is
confusing to applications.
Problem is that when followed by one of these layers, the EtherType field
of the preceding layer keeps its "inner" definition, and the "outer" TPID
is provided by the subsequent layer, the reverse of how a packet looks like
on the wire:
Wire: [ ETH TPID = A | VLAN EtherType = B | B DATA ]
rte_flow: [ ETH EtherType = B | VLAN TPID = A | B DATA ]
Worse, when QinQ is involved, the stacking order of VLAN layers is
unspecified. It is unclear whether it should be reversed (innermost to
outermost) as well given TPID applies to the previous layer:
Wire: [ ETH TPID = A | VLAN TPID = B | VLAN EtherType = C | C DATA ]
rte_flow 1: [ ETH EtherType = C | VLAN TPID = B | VLAN TPID = A | C DATA ]
rte_flow 2: [ ETH EtherType = C | VLAN TPID = A | VLAN TPID = B | C DATA ]
While specifying EtherType/TPID is hopefully rarely necessary, the stacking
order in case of QinQ and the lack of documentation remain an issue.
This patch replaces TPID in the VLAN pattern item with an inner
EtherType/TPID as is usually done everywhere else (e.g. struct vlan_hdr),
clarifies documentation and updates all relevant code.
It breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Summary of changes for PMDs that implement ETH, VLAN or E_TAG pattern
items:
- bnxt: EtherType matching is supported with and without VLAN, but TPID
matching is not and triggers an error.
- e1000: EtherType matching is only supported with the ETHERTYPE filter,
which does not support VLAN matching, therefore no impact.
- enic: same as bnxt.
- i40e: same as bnxt with existing FDIR limitations on allowed EtherType
values. The remaining filter types (VXLAN, NVGRE, QINQ) do not support
EtherType matching.
- ixgbe: same as e1000, with additional minor change to rely on the new
E-Tag macro definition.
- mlx4: EtherType/TPID matching is not supported, no impact.
- mlx5: same as bnxt.
- mvpp2: same as bnxt.
- sfc: same as bnxt.
- tap: same as bnxt.
Fixes: b1a4b4cbc0 ("ethdev: introduce generic flow API")
Fixes: 99e7003831 ("net/ixgbe: parse L2 tunnel filter")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
RSS hash types (ETH_RSS_* macros defined in rte_ethdev.h) describe the
protocol header fields of a packet that must be taken into account while
computing RSS.
When facing encapsulated (e.g. tunneled) packets, there is an ambiguity as
to whether these should apply to inner or outer packets. Applications need
the ability to tell exactly "where" RSS must be performed.
This is addressed by adding encapsulation level information to the RSS flow
action. Its default value is 0 and stands for the usual unspecified
behavior. Other values provide a specific encapsulation level.
Contrary to the change announced by commit 676b605182 ("doc: announce
ethdev API change for RSS configuration"), this patch does not affect
struct rte_eth_rss_conf but struct rte_flow_action_rss as the former is not
used anymore by the RSS flow action. ABI impact is therefore limited to
rte_flow.
This breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
By definition, RSS involves some kind of hash algorithm, usually Toeplitz.
Until now it could not be modified on a flow rule basis and PMDs had to
always assume RTE_ETH_HASH_FUNCTION_DEFAULT, which remains the default
behavior when unspecified (0).
This breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Since its inception, the rte_flow RSS action has been relying in part on
external struct rte_eth_rss_conf for compatibility with the legacy RSS API.
This structure lacks parameters such as the hash algorithm to use, and more
recently, a method to tell which layer RSS should be performed on [1].
Given struct rte_eth_rss_conf will never be flexible enough to represent a
complete RSS configuration (e.g. RETA table), this patch supersedes it by
extending the rte_flow RSS action directly.
A subsequent patch will add a field to use a non-default RSS hash
algorithm. To that end, a field named "types" replaces the field formerly
known as "rss_hf" and standing for "RSS hash functions" as it was
confusing. Actual RSS hash function types are defined by enum
rte_eth_hash_function.
This patch updates all PMDs and example applications accordingly.
It breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
[1] commit 676b605182 ("doc: announce ethdev API change for RSS
configuration")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add new callbacks for eth_dev_ops of i40e to get the information
and data of plugin module eeprom.
Signed-off-by: Zijie Pan <zijie.pan@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Expose the runtime queue configuration capability and enhance
i40e_dev_[rx|tx]_queue_setup to handle the situation when
device already started.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Update link status related feature document items and minor updates in
some link status related functions.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
With icc (ICC) 18.0.1 20171018, -wd usage generates following warning:
icc: command line remark #10010: option '-wd3656' is deprecated and will
be removed in a future release. See '-help deprecated'
"icc -help deprecated" output is:
-wd use -diag-disable
Based on above information "-wd" converted to "-diag-disable"
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
There is a specific function to set error for flow configuration,
so change to use that function.
Fixes: ecad87d223 ("net/i40e: move RSS to flow API")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch add comment for flow rss parse function in order
to explain some important info. This patch also delete some
useless code for queue index check for RSS queue region
configuration.
Fixes: ecad87d223 ("net/i40e: move RSS to flow API")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Change the prototype and the behavior of dev_ops->eth_mac_addr_set(): a
return code is added to notify the caller (librte_ether) if an error
occurred in the PMD.
The new default MAC address is now copied in dev->data->mac_addrs[0]
only if the operation is successful.
The patch also updates all the PMDs accordingly.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Customized info will be updated when processing DDP package,
including PCYPE/PTYPE/protocol. Previously, the customized info
is updated without any check for package operation - ADD or DEL,
but only covers ADD operation. In this situation, even if a package
is being removed, new PCTYPE/PTYPE/protocol will still be created,
it will cause wrong parsing for SW. This patch cleans new
PCTYPE/PTYPE/protocol created when a package is being removed.
Fixes: e163c18a15 ("net/i40e: update ptype and pctype info")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
The optimal values of several transmission & reception related
parameters, such as burst sizes, descriptor ring sizes, and number
of queues, varies between different network interface devices. This
patch allows individual PMDs to specify preferred parameter values.
Signed-off-by: Remy Horton <remy.horton@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Public struct rte_eth_dev_info has a "struct rte_pci_device" field in it
although it is common for all ethdev in all buses.
Replacing pci specific struct with generic device struct and updating
places that are using pci device in a way to get this information from
generic device.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: David Marchand <david.marchand@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
There need a queue index check for RSS queue region
in order to aviod error from configuration.
Fixes: ecad87d223 ("net/i40e: move RSS to flow API")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Vlan tci configuration from testpmd is stored in big endian, changing
it to little endian is needed before using it.
Fixes: ecad87d223 ("net/i40e: move RSS to flow API")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Group ID 0xFF indicates that packages does not change parser
graph so compatible with any other packages.
Fixes: b1ec717bff ("net/i40e: fix multiple DDP packages conflict")
Cc: stable@dpdk.org
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch adds log when setting input set since global
configuration is changed.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Reviewed-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add support the set_mc_addr_list device operation in the i40evf PMD.
The configured addresses are stored in the device private area, so
they can be flushed before adding new ones.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
I40e needs a protection for rss rule flow configuration
after a rule is set for a port.
Fixes: ecad87d223 ("net/i40e: move RSS to flow API")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The nic's interrupt source has some active callbacks, when
the port hotplug. Add a retry to give more port's a chance
to uninit before returning an error.
Fixes: d42aaf3000 ("i40e: support port hotplug")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Use new rte_eth_linkstatus_get/set helper functions to handle link
status update.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
In i40e_dev_link_update() the driver obtains the link status
info via admin queue command despite of "no_wait" flag. This
requires relatively long time and may be a problem to some
application such as ovs-dpdk.
(https://bugzilla.redhat.com/show_bug.cgi?id=1551761).
This patch aims to fix the problem by using a different
approach of obtaining link status for i40e NIC without waiting.
Instead of getting the link status via admin queue command,
this patch reads the link status registers to accelerate the
procedure.
Fixes: 263333bbb7 ("i40e: fix link status timeout")
Cc: stable@dpdk.org
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Signed-off-by: Andrey Chilikin <andrey.chilikin@intel.com>
Reviewed-by: Eelco Chaudron <echaudro@redhat.com>
Tested-by: Eelco Chaudron <echaudro@redhat.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Fixes: e940646b20 ("drivers/net: build Intel NIC PMDs with meson")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This reverts commit 7b7711bea5 ("net/i40e/base: enhance loopback
AQ command").
It was to support multiple type of loopbacks, which results to
configuration error about adminq. So revert it as agreed.
Fixes: 7b7711bea5 ("net/i40e/base: enhance loopback AQ command")
Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Should be not possible to load conflicting DDP profiles. Only DDP
profiles of the same group (not 0) can be loaded together. If DDP
profile group is 0, it is exclusive, i.e. it cannot be loaded with
any other DDP profile. If DDP profile groups are different, these
profiles cannot be loaded together.
Fixes: b319712f53 ("net/i40e: extended list of operations for DDP processing")
Cc: stable@dpdk.org
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: Andrey Chilikin <andrey.chilikin@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
There's interrupt conflict when using DPDK and Linux i40e
on different ports of the same Ethernet controller, this
patch fixes it by switching from IntN to Int0 if multiple
drivers are used.
Fixes: be6c228d4d ("i40e: support Rx interrupt")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
This patch provides the option to disable writing some global registers
in PMD, in order to avoid affecting other drivers, when multiple drivers
run on the same NIC and control different physical ports. Because there
are few global resources shared among different physical ports.
Fixes: ec246eeb5d ("i40e: use default filter input set on init")
Fixes: 98f0557076 ("i40e: configure input fields for RSS or flow director")
Fixes: f05ec7d77e ("i40e: initialize flow director flexible payload setting")
Fixes: e536c2e328 ("net/i40e: fix parsing QinQ packets type")
Fixes: 19b16e2f64 ("ethdev: add vlan type when setting ether type")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
New testpmd will get CRC strip offload from rx_offload_capa. I40evf
cannot disable CRC strip. And in fact, it is enabled by PF. This
patch solves the issue by adding CRC strip flag into rx_offload_capa
in i40e and i40evf.
Fixes: 8b9bd0efe0 ("app/testpmd: disable Rx VLAN offloads by default")
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The AVX2 code path includes files from the ethdev, hash and kvargs libs.
These are not listed as dependencies in the case where AVX2 is not in
the default instruction set for the build e.g. machine=nehalem. This
leads to compiler errors as the header files needed cannot be found.
Fixes: e940646b20 ("drivers/net: build Intel NIC PMDs with meson")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This patch fixes issues reported by Coverity check. Function
parse_rss_action and i40e_config_rss_filter might return at wrong
time which will cause error for RSS configuration and parser. Hash
function variable with 32 bits width might also cause error when
it needs more than 32 bits, so change this variable to 64 bits.
Coverity issue: 257020, 257024, 257037
Fixes: ecad87d223 ("net/i40e: move RSS to flow API")
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This commit aligns the names for dynamic logging with
the newly defined logging format.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Any flags added to the project args are automatically added to all builds,
both native and cross-compiled. This is not what we want for the -march
flag as a valid -march for the cross-compile is not valid for pmdinfogen
which is a native-build tool.
Instead we store the march flag as a variable, and add it to the default
cflags for all libs, drivers, examples, etc. This will allow pmdinfogen to
compile successfully in a cross-compilation environment.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
This patch changes the build process to group all .o files for a driver or
library into a static archive first, and then link the .o files together
into a shared library. This eliminates the need for separate static or
shared object builds when packaging, for instance.
The "default_library" configuration option now only affects the apps and
examples, which are either linked against the static or shared library
versions depending on the value of the option.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
The EAL and compat libraries were special-cases in the library build
process, the former because of it's complexity, and the latter because
it only consists of a single header file.
By reworking the EAL meson.build files, we can eliminate the need for it to
be a special case, by having it build up and return the list of sources,
headers, and objects and return those to the higher level build file. This
should also simplify the building of EAL, as we can eliminate a number of
meson.build files that would no longer be needed, and have fewer, but
larger meson.build files (9 now vs 14 previous) - thereby making the logic
easier to follow and items easier to find.
Once done, we can pull eal into the main library loop, with some
modifications to support it. Compat can also be pulled it once we add in a
check to handle the case of an empty sources list.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Add the e1000, fm10k, i40e and ixgbe drivers to the meson & ninja build.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
When using UIO, after enabling the interrupt to get the PF
message, VF RX queue interrupt is not working.
It's expected, as UIO doesn't support multiple interrupt.
So, PMD should not try to enable RX queue interrupt. Then
APP can know the RX queue interrupt is not enabled and only
choose the polling mode.
Fixes: ae19955e7c ("i40evf: support reporting PF reset")
CC: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Parameter action_flag is not used correctly in i40e_flow_parse_rss_action.
Also change it from point type to value type since it is not an output
parameter.
Fixes: ecad87d223 ("net/i40e: move RSS to flow API")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Zhiyong Yang <zhiyong.yang@intel.com>
There are several func calls to rte_zmalloc() which don't have null
pointer check on the return value. And before return, the memory
is not freed. It fixes by adding null pointer check and rte_free().
Fixes: 078259773d ("net/i40e: store ethertype filter")
Fixes: 425c3325f0 ("net/i40e: store tunnel filter")
Fixes: c50474f31e ("net/i40e: support tunnel filter to VF")
Fixes: 5c53c82c81 ("net/i40e: store flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Yong Wang <wang.yong19@zte.com.cn>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Remove some unnecessary explicit type casting, to clean the code.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Create a rte_ethdev_driver.h file and move PMD specific APIs here.
Drivers updated to include this new header file.
There is no update in header content and since ethdev.h included by
ethdev_driver.h, nothing changed from driver point of view, only
logically grouping of APIs. From applications point of view they can't
access to driver specific APIs anymore and they shouldn't.
More PMD specific data structures still remain in ethdev.h because of
inline functions in header use them. Those will be handled separately.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Replace strncmp with strncasecmp in i40e_update_customized_ptype
function for compatibility.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
There're new metadata IPV4FRAG and IPV6FRAG in PPP
profile, this patch improves ptype parser to support
IPV4FRAG and IPV6FRAG.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Fail to update SW ptype mapping table when loading
PPP profile, though profile can be loaded successfully.
It will cause fail to parse SW ptype during receiving
packets. This patch fixes this issue.
Fixes: 11556c915a ("net/i40e: improve packet type parser")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Increase the internal limit for flow types from 32 to 64
to support future flow type extensions.
Change type of variables from uint32_t[] to uint64_t[]:
rte_eth_fdir_info.flow_types_mask
rte_eth_hash_global_conf.sym_hash_enable_mask
rte_eth_hash_global_conf.valid_bit_mask
This modification affects the following components:
net/i40e
net/ixgbe
app/testpmd
ABI versioning used to keep ABI stability.
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Move setting PCType after setting port's MAC type, which can resolve
the issue of PCType doesn't take effect on X722.
Fixes: a286ebeb07 ("net/i40e: add dynamic mapping of SW flow types to HW pctypes")
Cc: stable@dpdk.org
Signed-off-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Current flag is in wrong byte order for i40e_aq_mac_address_write,
and just uses the well defined macro instead.
Fixes: e18e01e92c ("i40e: support default MAC address setting")
Cc: stable@dpdk.org
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Reported by check-includes.sh:
[...]/rte_pmd_i40e.h:97:30: error: ISO C restricts enumerator values to
range of `int' [-Werror=pedantic]
RTE_PMD_I40E_PKG_INFO_MAX = 0xFFFFFFFF
^
Fixes: edeab742ed ("net/i40e: get information about DDP profile")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Calling i40evf_dev_xstats_reset can sometimes crash. Fixed issue
by checking return code before using pstats.
Fixes: 8210e9e0d8 ("net/i40e: fix clear xstats bug in VF")
Cc: stable@dpdk.org
Signed-off-by: David Harton <dharton@cisco.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Wei Zhao <wei.zhao1@intel.com>
This patch will go into the process of clear all queue region
related configuration when dev stop even if there is no queue region
command before, so this is a bug, it may cause error. So add code
to check if there is queue configuration exist when flush queue
region config and remove this process when device stop. Queue region
clear only do when device initialization or PMD get flush command.
Fixes: 7cbecc2f74 ("net/i40e: support queue region set and flush")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
New MAC address is copied to dev->data->mac_addrs[0] before calling
setting MAC address ops. So it will fail when deleting
dev->data->mac_addrs[0]. Deleting hw->mac.addr will fix the issue.
Fixes: 943c2d899a ("net/i40e: set VF MAC from VF")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Rte_flow was defined to include RSS, this patch moves i40e
existing RSS to rte_flow. The old RSS configuration is kept
as it was, and can be deprecated in the future.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch supports getting/setting input set info for
RSS, FDIR, and FDIR flexible payload. It also adds some
helper functions for input set configuration.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The pointer to the user parameter of the callback registration is
automatically pass to the callback function.
There is no point to allow changing this user parameter by a caller.
That's why this parameter is always set to NULL by PMDs and set only
in ethdev layer before calling the callback function.
The history is that the user parameter was initially used
by the callback implementation to pass some information
between the application and the driver:
c1ceaf3ad0 ("ethdev: add an argument to internal callback function")
Then a new parameter has been added to leave the user parameter
to its standard usage of context given at registration:
d6af1a13d7 ("ethdev: add return values to callback process API")
The NULL parameter in the internal callback processing function
is now removed. It makes clear that the callback parameter is user
managed and opaque from a DPDK point of view.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
When primary address mac is changed, the mac filters were not updated in
the VSI with the new mac addr and incoming packets with this destination
address are dropped by the hardware filters.
This patch removes the VSI mac filter for the previous mac address and
adds a new one for new mac address.
Fixes: e18e01e92c ("i40e: support default MAC address setting")
Cc: stable@dpdk.org
Signed-off-by: Laurent Hardy <laurent.hardy@6wind.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add a new Rx function using AVX2 instructions for higher
performance. For now, this functionality is limited to platforms
with Intel Xeon Scalable Processor(SP). The function to be used
is selected at runtime, not just at compile-time.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add a new Tx function using AVX2 instructions for higher
performance. For now, this functionality is limited to platforms
with Intel Xeon Scalable Processor(SP). The function to be used
is selected at runtime, not just at compile-time.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Rename virtchnl_vf_resource's vf_offload_flags to vf_cap_flags.
The new name is more generic, so more than just offloading
capabilities can be added.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This fix prevents errors or warnings while accessing unaligned 32-bit
data words on non-x86 platforms during getting link info from firmware.
Fixes: e8228f1a16 ("net/i40e/base: report supported link modes")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Previous method for reading LLDP config was based on hard-coded offsets.
It happened to work, because of structured architecture of the NVM memory.
In the new approach, known as FLAT, we need to calculate the absolute
address, instead of using relative values. Needed defines for memory
location were added.
Fixes: 8db9e2a1b2 ("i40e: base driver")
CC: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
When using GCC 6.3.0 and EXTRA_CFLAGS=-Og, the compiler is not smart
enough to see that when you have an integrated VF that just one of the
if statemets has to be true so that ntu is always set. Fix the way that
the code is for integrated VFs so that the compiler won't complain.
Fixes: 9783eb15eb ("i40e/base: wrap the register definitions for PF and VF")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The FW has the ability to return a critical error on every AQ command.
So add the new return type as critical error to sync with firmware.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add new AQ command that help to inform software how advanced
rearrangement process is.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
New control bits were defined for flat NVM structure.
One for pointing which NVM bank is currently used and
one used as indicator of structure type.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This fix solves an issue occurring while calling i40e_led_set function
from the driver with "blink" parameter set as TRUE. This call resulted
in Activity LED blinking instead of Link LED, which may lead to errors
in physically identyfying the port, since Activity LED may be blinking
for different reasons aswell.
Fixes: 51b27bc5d8 ("i40e/base: update LED blinking")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This patch adds new I40E_NVMUPD_GET_AQ_EVENT state
to allow retrieval of AdminQ events as a result.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add preservation flags support on X722 devices for NVM update AdminQ
function wrapper. Add new parameter and handling to nvm update admin
queue function intended to allow nvmupdate tool to configure the
preservation flags in the AdminQ command.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
1. Cleanup logical in __i40e_read_nvm_word and reuse it in
i40e_read_nvm_word.
2. Change couple functions to static so we can remove uncessary function
declarations
3. Cleanup logical in i40e_validate_nvm_checksum.
4. Add more debug information in PF reset
5. correct comments
6. Minor code style fix.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
NVM lock is only required at below situation:
1. its X722 device or
2. API version >= 1.5
or may have issue at firmware downgrade.
Fixes: c5846a125b ("net/i40e/base: fix NVM access interfering")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add new Adminq command i40e_aqc_opc_set_dcb_parameters that
helps to get DCB parameters in data structure i40e_aqc_set_dcb_parameters.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Introduce a helper function which can convert the AdminQ link speed
definition into a virtchnl definition. This can then be used by host
driver implementations in order to safely convert to the interface
recognized by the virtual functions.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add byte swap commandwhen transferring data between memory and firmware
while using PHY register access functions. Endianness also need to be
handled correctly during these swaps.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
When the I2C is busy, the PHY reads are delayed. The firmware will
return EGAIN in these cases with an expectation that the SW will trigger
the reads again. This patch retries the operation for a maximum period
of 500ms.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Fix a bug that adminq spin lock is not be released before function
i40e_nvmupd_command returns.
Fixes: 5a2e46a3e4 ("net/i40e/base: refactor NVM update command processing")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add new PHY type I40E_PHY_TYPE_NOT_SUPPORTED_HIGH_TEMP, it will be set
by firmware if device module does not meet the thermal requirements.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
When use port stats register to calculate the packet count, LLDP packets
are counted in statistics which is not expected, the patch exclude this
number from total number.
Fixes: 763de290cb ("net/i40e: fix packet count for PF")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Function i40e_GLQF_reg_init() overwrites global register for
flexible payload, forcing extraction of first 16 bytes of
L2/L3/L4 payload to the field vector even if flexible payload
is not used by an application. Such unconditional turn on of
flexible payload effectively disables ability to use outer
IP Destination address for RSS/FDIR for tunnelled packets,
as flexible payload overwrites outer IP destination address
on the field vector.
Now flexible payload turned on only when flow director is
enabled and configured.
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Without this patch, the number of queues per i40e VF is set to 4
by CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VF=4 in config/common_base.
It is a fixed value determined at compile time and can't be changed
at run time.
With this patch, the number of queues per i40e VF can be determined
at run time. For example, if the PCI address of an i40e PF is
aaaa:bb.cc, with the EAL parameter -w aaaa:bb.cc,queue-num-per-vf=8,
the number of queues per VF created from this PF is set to 8.
If there is no "queue-num-per-vf" setting in EAL parameters, it uses
the default value of 4. And if the value after the "queue-num-per-vf"
is invalid, it will also use the default value. The valid values can
be 1, 2, 4, 8, or 16.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Current default ITR interval I40E_QUEUE_ITR_INTERVAL_DEFAULT is
used by both DPDK PF and DPDK VF, but this ITR interval value
will cause lots of interrupts when using VF. This patch modifies
VF default ITR interval to reduce interrupts.
ITR interval can be reconfigured by RTE_LIBRTE_I40E_ITR_INTERVAL
if expecting low latency.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Failed to create two FDIR rules with different vlan id for
the same PCTYPE. Root cause is that wrong hash key length
is used.
Fixes: 4149825bbd ("net/i40e: finish integration FDIR with generic flow API")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
