This patch adds missing supported Tx multi-segs offloading.
Fixes: 51215925a3 ("net/ixgbe: convert to new Tx offloads API")
Cc: stable@dpdk.org
Signed-off-by: Wei Dai <wei.dai@intel.com>
Tested-by: Lei Yao <lei.a.yao@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add ixgbe MDIO lock/unlock and access APIs to read and write registers
using specific device address. This provides MDIO access to any devices
that are not associated with the autoprobed PHY.Export these APIs via
the map file
Signed-off-by: Shweta Choudaha <shweta.choudaha@att.com>
Reviewed-by: Chas Williams <chas3@att.com>
Reviewed-by: Luca Boccassi <bluca@debian.org>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The new functions for Rx and Tx offloads should not be inside the
conditional block for the vector driver, otherwise compile errors occur
when vector driver is disabled. For example:
ixgbe_ethdev.c:3636:36: error:
implicit declaration of function ‘ixgbe_get_rx_queue_offloads’;
This shows up as an error when doing ARM builds using meson as the vector
driver is not (yet) enabled for those builds.
Fixes: 51215925a3 ("net/ixgbe: convert to new Tx offloads API")
Fixes: ec3b1124d1 ("net/ixgbe: convert to new Rx offloads API")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
With icc (ICC) 18.0.1 20171018, -wd usage generates following warning:
icc: command line remark #10010: option '-wd3656' is deprecated and will
be removed in a future release. See '-help deprecated'
"icc -help deprecated" output is:
-wd use -diag-disable
Based on above information "-wd" converted to "-diag-disable"
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Change the prototype and the behavior of dev_ops->eth_mac_addr_set(): a
return code is added to notify the caller (librte_ether) if an error
occurred in the PMD.
The new default MAC address is now copied in dev->data->mac_addrs[0]
only if the operation is successful.
The patch also updates all the PMDs accordingly.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
This patch adds support for explicitly selecting 2.5G and 5G speeds on
X550.
Signed-off-by: Martin Weiser <martin.weiser@allegro-packets.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Public struct rte_eth_dev_info has a "struct rte_pci_device" field in it
although it is common for all ethdev in all buses.
Replacing pci specific struct with generic device struct and updating
places that are using pci device in a way to get this information from
generic device.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: David Marchand <david.marchand@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
dev->data->eth_link isn't updated until the first interrupt. If a
link is carrier down, then this interrupt may never happen. Before we
finished starting the PMD, call ixgbe_dev_link_update() to ensure we
have a valid status.
Signed-off-by: Chas Williams <chas3@att.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
If we haven't set wait_to_complete, there is no need to busy wait
until we have a link status. Applications, like bonding, use the
wait_to_complete flag to indicate that they will be doing their own
busy wait and will likely be polling again shortly.
Fixes: dc66e5fd01 ("net/ixgbe: improve link state check on VF")
Cc: stable@dpdk.org
Signed-off-by: Chas Williams <chas3@att.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Ethdev Tx offloads API has changed since:
commit cba7f53b71 ("ethdev: introduce Tx queue offloads API")
This commit support the new Tx offloads API.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Ethdev Rx offloads API has changed since:
commit ce17eddefc ("ethdev: introduce Rx queue offloads API")
This commit support the new Rx offloads API.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
VLAN strip is a per queue offloading in VF. With this patch
it can be enabled or disabled on any Rx queue in VF.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
VLAN strip is a per queue offloading in PF. With this patch
it can be enabled or disabled on any Rx queue in PF.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The nic's interrupt source has some active callbacks, when
the port hotplug. Add a retry to give more port's a chance
to uninit before returning an error.
Fixes: 2866c5f1b8 ("ixgbe: support port hotplug")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Use new rte_eth_linkstatus_get/set helper functions to handle link
status update.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Fixes: e940646b20 ("drivers/net: build Intel NIC PMDs with meson")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
testpmd needs to get CRC strip offload from rx_offload_capa with a
recent change. This patch adds CRC strip flag to rx_offload_capa
for ixgbe and ixgbevf, as they have the capability.
Fixes: 8b9bd0efe0 ("app/testpmd: disable Rx VLAN offloads by default")
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This commit aligns the names for dynamic logging with
the newly defined logging format.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Any flags added to the project args are automatically added to all builds,
both native and cross-compiled. This is not what we want for the -march
flag as a valid -march for the cross-compile is not valid for pmdinfogen
which is a native-build tool.
Instead we store the march flag as a variable, and add it to the default
cflags for all libs, drivers, examples, etc. This will allow pmdinfogen to
compile successfully in a cross-compilation environment.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
This patch changes the build process to group all .o files for a driver or
library into a static archive first, and then link the .o files together
into a shared library. This eliminates the need for separate static or
shared object builds when packaging, for instance.
The "default_library" configuration option now only affects the apps and
examples, which are either linked against the static or shared library
versions depending on the value of the option.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
The EAL and compat libraries were special-cases in the library build
process, the former because of it's complexity, and the latter because
it only consists of a single header file.
By reworking the EAL meson.build files, we can eliminate the need for it to
be a special case, by having it build up and return the list of sources,
headers, and objects and return those to the higher level build file. This
should also simplify the building of EAL, as we can eliminate a number of
meson.build files that would no longer be needed, and have fewer, but
larger meson.build files (9 now vs 14 previous) - thereby making the logic
easier to follow and items easier to find.
Once done, we can pull eal into the main library loop, with some
modifications to support it. Compat can also be pulled it once we add in a
check to handle the case of an empty sources list.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Add the e1000, fm10k, i40e and ixgbe drivers to the meson & ninja build.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
When using UIO, after enabling the interrupt to get the PF
message, VF RX queue interrupt is not working.
It's expected, as UIO doesn't support multiple interrupt.
So, PMD should not try to enable RX queue interrupt. Then
APP can know the RX queue interrupt is not enabled and only
choose the polling mode.
Fixes: 77234603fb ("net/ixgbe: support VF mailbox interrupt for link up/down")
CC: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Check if the security enable bits are not fused before setting
offload capabilities for security.
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add checks during build to ensure that all symbols in the EXPERIMENTAL
version map section have __experimental tags on their definitions, and
enable the warnings needed to announce their use. Also add an
ALLOW_EXPERIMENTAL_APIS define to allow individual libraries and files
to declare the acceptability of experimental api usage
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Create a rte_ethdev_driver.h file and move PMD specific APIs here.
Drivers updated to include this new header file.
There is no update in header content and since ethdev.h included by
ethdev_driver.h, nothing changed from driver point of view, only
logically grouping of APIs. From applications point of view they can't
access to driver specific APIs anymore and they shouldn't.
More PMD specific data structures still remain in ethdev.h because of
inline functions in header use them. Those will be handled separately.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Increase the internal limit for flow types from 32 to 64
to support future flow type extensions.
Change type of variables from uint32_t[] to uint64_t[]:
rte_eth_fdir_info.flow_types_mask
rte_eth_hash_global_conf.sym_hash_enable_mask
rte_eth_hash_global_conf.valid_bit_mask
This modification affects the following components:
net/i40e
net/ixgbe
app/testpmd
ABI versioning used to keep ABI stability.
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Mailbox interrupt handler only takes care of PF reset notification, for
other message ixgbe_read_mbx should not be called since it gets chance
to break the foreground VF to PF communication.
This can be simply repeated by 'testpmd>rx_vlan rm all 0'.
Fixes: 77234603fb ("net/ixgbe: support VF mailbox interrupt for link up/down")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
VF can't run in multiple queue mode, if nb_q_per_pool is set to 1.
Nb_q_per_pool is passed through to max_rx_q and max_tx_q in VF.
So if nb_q_per_pool is equal to 1, max_rx_q and max_tx_q shouldn't
be more than 1, otherwise VF multiple queue mode will fail.
RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool is the Max number of queue can be
used in VF, that would be assigned as IXGBE_MAX_RX_QUEUE_NUM /
RTE_ETH_DEV_SRIOV(dev).active, so that assigning nb_q_per_pool as 1
when PF is in ETH_MQ_RX_NONE, which will make VF can just use only 1
queue, is not right.
Fixes: 27b609cbd1 ("ethdev: move the multi-queue mode check to specific drivers")
Cc: stable@dpdk.org
Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
The pointer to the user parameter of the callback registration is
automatically pass to the callback function.
There is no point to allow changing this user parameter by a caller.
That's why this parameter is always set to NULL by PMDs and set only
in ethdev layer before calling the callback function.
The history is that the user parameter was initially used
by the callback implementation to pass some information
between the application and the driver:
c1ceaf3ad0 ("ethdev: add an argument to internal callback function")
Then a new parameter has been added to leave the user parameter
to its standard usage of context given at registration:
d6af1a13d7 ("ethdev: add return values to callback process API")
The NULL parameter in the internal callback processing function
is now removed. It makes clear that the callback parameter is user
managed and opaque from a DPDK point of view.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch mainly adds/removes comments for function parameters
that were missing or no longer needed.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch clears software resource bits in synchronization
register and updates host interface resource bit error case for
X540. It also fixes compile warnings of using GCC 7.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
With this patch, it uses 2 bytes of buffer reading, as required
for flash read command. It also adds definitions for LESM module.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch adds lockless read/write support for clause 22 PHY,
together with some enhancements for link speed and return value
handling.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Increase SECRX_RDY polling frequency and semaphore timeout which
fixes the FWSW.PT check in ixgbe_mng_present().
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add common functions for getting OEM product version, option
ROM version, and ETrack id.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Tx_q check fails when the SRIOV is active and tx_q > rx_q. It has
to use the maximum HW queue number for calculation, to get the
right number of queue can be used.
Fixes: 27b609cbd1 ("ethdev: move the multi-queue mode check to specific drivers")
Cc: stable@dpdk.org
Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Rte_flow was defined to include RSS, this patch moves ixgbe
existing RSS to rte_flow. The old RSS configuration is kept
as it was, and can be deprecated in the future.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
This patch fixes the issue of mask check in NVGRE parser
for flow API.
Fixes: 11777435c7 ("net/ixgbe: parse flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add a mode type check for tunnel mode, if FDIR is in this mode,
it does not need to do sanity check for x550.
Fixes: a2ba854ec6 ("net/ixgbe: fix MAC VLAN filter fail problem")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
All ipsec related settings are being held in the driver
private data to allow easy add and remove of SAS. There
is no need to keep a record of the keys, and also
storing the keys can be a security issue.
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
ixgbe ntuple filter in rte_flow needs to support diversion data
with less than 5 tuple parameters. So it adds this new support
in parser code. This patch also adds parsering vlan pattern code
in ntuple filter in order to handle some cases like vlan in flow
API.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The datasheet says, if using MSI-X mode, the PBA support
bit of the GPIE register must be set to 1.
DPDK uses polling mode, we cannot hit this issue in the
scenario DPDK PF + DPDK VF. If we use DPDK PF + kernel VF,
as the kernel driver uses interrpt mode, VF may hit RX hang
after running hours.
Fixes: 00e30184da ("ixgbe: add PF support")
Cc: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
fixes the following compilation error on compiling with ARM BE compiler
ixgbe_common.c: In function ‘ixgbe_host_interface_command’:
ixgbe_common.c:4610:22: error: passing argument 1 of
‘__builtin_bswap32’ makes integer from pointer without a cast
[-Werror=int-conversion]
IXGBE_LE32_TO_CPUS(&buffer[bi]);
^
Fixes: aa4fc14d2c ("ixgbe: update base driver")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Repeated occurrences of 'the'.
The change was obtained using the following command:
sed -i "s;the the ;the ;" `git grep -l "the "`
Signed-off-by: Thierry Herbelot <thierry.herbelot@6wind.com>
Replace the BSD license header with the SPDX tag for files
with only an Intel copyright on them.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Fixes: 97cb466d65 ("mbuf: use 2 bytes for port and nb segments")
Cc: stable@dpdk.org
Signed-off-by: Ilya V. Matveychikov <matvejchikov@gmail.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The action for L2 tunnel should be VF or PF, not QUEUE.
Fixes: 99e7003831 ("net/ixgbe: parse L2 tunnel filter")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
And small performance improvement
Fixes: 9a0752f498 ("net/ixgbe: enable inline IPsec")
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
On SUSE11 with gcc 4.5.1 the following build error occurred,
most likely because of improper handling of annonymous unions:
drivers/net/ixgbe/ixgbe_ipsec.c:579:4: error:
unknown field ‘ipsec’ specified in initializer
Fixes: 9a0752f498 ("net/ixgbe: enable inline IPsec")
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
The following inline functions and macros have been renamed to be
consistent with the IOVA wording:
rte_mbuf_data_dma_addr -> rte_mbuf_data_iova
rte_mbuf_data_dma_addr_default -> rte_mbuf_data_iova_default
rte_pktmbuf_mtophys -> rte_pktmbuf_iova
rte_pktmbuf_mtophys_offset -> rte_pktmbuf_iova_offset
The deprecated functions and macros are kept to avoid breaking the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Rename buf_physaddr to buf_iova.
Keep the deprecated name in an anonymous union to avoid breaking
the API.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The struct rte_memzone field .phys_addr is renamed to .iova.
The deprecated name is kept in an anonymous union to avoid breaking
the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
The memzone header is often included without good reason.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The PCI lib defines the types and methods allowing to use PCI elements.
The PCI bus implements a bus driver for PCI devices by constructing
rte_bus elements using the PCI lib.
Move the relevant code out of the EAL to its expected place.
Libraries, drivers, unit tests and applications are updated to use the
new rte_bus_pci.h header when necessary.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Some devices may not support or fail setting VLAN offload
configuration based on dynamic circumstances so the
vlan_offload_set_t vector is modified to return an int so
the caller can determine success or not.
rte_eth_dev_set_vlan_offload is updated to return the
value provided by the vector when called along with restoring
the original offload configs on failure.
Existing vlan_offload_set_t vectors are modified to return
an int. Majority of cases return 0 but a few that actually
can fail now return their failure codes.
Finally, a vlan_offload_set_t vector is added to virtio
to facilitate dynamically turning VLAN strip on or off.
Signed-off-by: David Harton <dharton@cisco.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
PKT_RX_VLAN_PKT and PKT_RX_QINQ_PKT are deprecated for a while.
As explained in [1], these flags were kept to let the applications and
PMDs move to the new flag. There is also a need to support Rx vlan
offload without vlan strip (at least for the ixgbe driver).
This patch renames the old flags for this feature, knowing that some
PMDs were using PKT_RX_VLAN_PKT and PKT_RX_QINQ_PKT to indicate that
the vlan tci has been saved in the mbuf structure.
It is likely that some PMDs do not set the proper flags when doing vlan
offload, and it would be worth making a pass on all of them.
Link: [1] http://dpdk.org/ml/archives/dev/2017-June/067712.html
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This flag is not necessary at the ether layer anymore.
Buses are able to advertise their hotplug support. The ether layer can
rely upon this capability instead of a special flag.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
When SRIOV is active, the function ixgbe_dev_get_dcb_info( )
should return the DCB traffic class info of its own queues,
not including any DCB info of the queues of any its VF.
When VMDQ is active, all queues are belonged to the PF,
the function ixgbe_dev_get_dcb_info can return DCB info
of all queues.
Fixes: 89d6728c78 ("ethdev: get DCB information")
Cc: stable@dpdk.org
Signed-off-by: Wei Dai <wei.dai@intel.com>
Reviewed-by: Jingjing Wu <jingjing.wu@intel.com>
It's by design that APP can add a TM node without shaper
profile. But ixgbe doesn't support it currently.
Fixes: e0ff4d304c ("net/ixgbe: support adding TM node")
Fixes: 5713ade697 ("net/ixgbe: support committing TM hierarchy")
Cc: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Only queue nodes should be taken as leaf nodes, all
the other nodes are non-leaf nodes.
Correct it when getting the TM level capability.
Fixes: 596988e193 ("net/ixgbe: support getting TM level capability")
Cc: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Only queue nodes should be taken as leaf nodes, all
the other nodes are non-leaf nodes.
Correct it when checking the parameters of the TM nodes.
Fixes: e0ff4d304c ("net/ixgbe: support adding TM node")
Cc: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The list of libraries in LDLIBS was generated from the DEPDIRS-xyz
variable. This is valid when the subdirectory name match the library
name, but it's not always the case, especially for PMDs.
The patches removes this feature and explicitly adds the proper
libraries in LDLIBS.
Some DEPDIRS-xyz variables become useless, remove them.
Reported-by: Gage Eads <gage.eads@intel.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
In order to achieve reproducible builds, always use the same
order when listing files for compilation.
Signed-off-by: Luca Boccassi <luca.boccassi@gmail.com>
If we want to enable IOVA mode, introduced by
commit 93878cf025 ("eal: introduce helper API for IOVA mode"),
we need PMDs (for PCI devices) to expose this flag.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
In func ixgbe_dev_link_update(), "link.link_autoneg" is used in func
call rte_ixgbe_dev_atomic_write_link_status(), but is uninitialized.
Fixes: 82113036e4 ("ethdev: redesign link speed config")
Cc: stable@dpdk.org
Signed-off-by: Yong Wang <wang.yong19@zte.com.cn>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
When a VF port is bound to VFIO-PIC, only miscellaneous interrupt
is mapped to VFIO vector 0 in eth_ixgbevf_dev_init( ).
In ixgbevf_dev_start(), if previous VFIO interrupt mapping set in
eth_ixgbevf_dev_init( ) is not cleard, it will fail when calling
rte_intr_enable( ) tries to map Rx queue interrupt to other VFIO
vectors. This patch clears the VFIO interrupt mappings before
setting both miscellaneous and Rx queue interrupt mappings again
to avoid failure.
Fixes: 77234603fb ("net/ixgbe: support VF mailbox interrupt for link up/down")
Cc: stable@dpdk.org
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Tested-by: Jianwei Ma <jianwei.ma@intel.com>
When a VF port is bound to VFIO-PCI, miscellaneous interrupt is
mapped to MSI-X vector 0 and Rx queues interrupt are mapped to
other vectors in vfio_enable_msix( ). To simplify implementation,
all VFIO-PCI bound ixgbe VF Rx queue interrupts can be mapped in
vector 1. And as current igb_uio only support only one vector,
ixgbe VF PMD should use vector 0 for igb_uio and vector 1 for
VFIO-PCI. Without this patch, VF Rx queue interrupt is mapped
to vector 0 in register settings and mapped to VFIO vector 1
in vfio_enable_msix( ), and then all Rx queue interrupts will
be missed.
Fixes: b13bfab4cd ("eal: reserve VFIO vector zero for misc interrupt")
Cc: stable@dpdk.org
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Tested-by: Jianwei Ma <jianwei.ma@intel.com>
The stats_get dev op API doesn't include return value, so PMD cannot
return an error in case of failure at stats getting process time.
Since PCI devices can be removed and there is a time between the
physical removal to the RMV interrupt, the user may get invalid stats
without any indication.
This patch changes the stats_get API return value to be int instead of
void.
All the net PMDs stats_get dev ops are adjusted by this patch.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Previously, to get MFN address in dom0, this API is a wrapper to
obtain the "physical address".
As we will removed xen dom0 support, this API is not necessary.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Extend port_id definition from uint8_t to uint16_t in lib and drivers
data structures, specifically rte_eth_dev_data. Modify the APIs,
drivers and app using port_id at the same time.
Fix some checkpatch issues from the original code and remove some
unnecessary cast operations.
release_17_11 and deprecation docs have been updated in this patch.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Some compilers generate warnings for duplicate symbols for the
set of filter lists current defined in ixgbe_ethdev.h.
This commits moves the definition and declaration to the source
file that actually uses them and provides a function to
initialize the values akin to its flush function.
Signed-off-by: David Harton <dharton@cisco.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Radu Nicolau <radu.nicolau@intel.com>
mirror rule_type can be a bit OR result of multiple mirror type of
a rule.
Fixes: 7ba29a76b1 ("ethdev: rename and extend the mirror type")
Cc: stable@dpdk.org
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
In the function ixgbe_flow_create(), the value ntuple_filter_ptr,
ethertype_filter_ptr, syn_filter_ptr, fdir_rule_ptr and l2_tn_filter_ptr
use rte_zmalloc().
malloc may return NULL, so we should check if the return value is NULL
or success.
Signed-off-by: RongQiang Xie <xie.rongqiang@zte.com.cn>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch fixes the mapping of user priority to traffic class
in Rx/Tx path of DCB configuration. Each DCB traffic class
should include all user priorities mapping to it in both Rx and
Tx path.
Fixes: 0807f80d35 ("ixgbe: DCB / flow control")
Cc: stable@dpdk.org
Signed-off-by: Wei Dai <wei.dai@intel.com>
This patch is to align with PF kernel driver version 5.1.3 to add the
number of queues to transmit VLAN packets in msg of queue info to VF.
If DCB is enabled, it is the number of DCB traffic classes.
If DCB is not enabled and default VLAN is enabled, it is 1.
For other cases, it is 0.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Add a mode type check for MAC VLAN mode, if fdir is
in this mode, it do not need to do sanity check for x550.
Fixes: dc0c16105d ("ixgbe: fix X550 flow director check")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Reset a NIC by calling dev_uninit and then dev_init.
Go through same way in NIC PCI remove without release of
ethdev resource and then NIC PCI probe function without
ethdev resource allocation.
Signed-off-by: Wei Dai <wei.dai@intel.com>
After fail to create a flow and if this is the first flow, the
mask_added flag should be reset, or it will prevent a new flow
which require different mask be created, since the mask config
remains impact.
Fixes: 72c135a89f ("net/ixgbe: create consistent filter")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
This patch adds support of 2.5G and 5G ethernet interface on X550.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The pci_id_ixgbe_map table has only PCI_ANY_ID for
.subvend and .subdev in all entries. Using of IXGBE_SUBDEV_ID_82599_SFP
for 'dev' is not correct. It generates the wrong PMD_INFO_STRING.
The output of the program "dpdk-pmdinfo.py" is confusing.
Signed-off-by: Leonid Myravjev <myravjev@amicon.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Mirror rule id should not exceed the boundary defined by
IXGBE_MAX_MIRROR_RULES.
Fixes: fe3a45fd41 ("ixgbe: add VMDq support")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
This NIC type port check should use port index
not mask for 82599ES.
Fixes: d9347d2540 ("net/ixgbe: support 82599ES SCTP packet drop action")
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Only x550 family support SCTP port in FDIR filter, so
add this limitation when parse consistent API.
Fixes: 11777435c7 ("net/ixgbe: parse flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
If there's no Traffic Management node added,
not necessary to check if TM is committed.
Fixes: 5713ade697 ("net/ixgbe: support committing TM hierarchy")
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
x550 devices don't map interrupt vector before enabling Rx/Tx queue
interrupt.
Because of this interrupt mode is not working for x550 devices.
Fixes: d2e72774e5 ("ixgbe/base: support X550")
Cc: stable@dpdk.org
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
Add queue index check when create filter rule, or
filter with invalid queue id can be created successfully.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
The x550 family does not support ipv6-other flow as well as
ipv4-other flow, so add this limitation.
Fixes: 7d629caced ("net/ixgbe: enable IPv6 for consistent API")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
82599ES can support SCTP packet drop action, but the
configuration is different from TCP or UDP packet, so
it need to rework some FDIR related code to adapt
drop action rule of SCTP packet.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Drop action is not supported by signature match, should return
error when try to create a signature match flow with drop action.
Fixes: a948d33bc0 ("net/ixgbe: enable signature match for consistent API")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
If LSC flag is changed to off at last device start, the
enable flag is not cleared in HW.
This patch fixes it.
Fixes: 0eb609239e ("ixgbe: enable Rx queue interrupts for PF and VF")
Cc: stable@dpdk.org
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add the support of the Traffic Management API,
rte_tm_hierarchy_commit.
When calling this API, the driver tries to enable
the TM configuration on HW.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
To support QoS scheduler APIs, create a new C file for
the TM (Traffic Management) ops but without any function
implemented.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Currently, if requested MTU is bigger than mbuf size and scattered
receive is not enabled, setting MTU to that value fails.
This patch allows setting this special MTU when device is stopped,
because scattered_rx will be re-configured during next port start
and driver may enable scattered receive according new MTU value.
After this patch, driver may select different receive function
automatically after MTU set, according MTU values selected.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Enable IPv6 support with rte_flow API.
Only supports signature Match.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Enable signature match for rte_flow API.
RTE_FLOW_ITEM_TYPE_FUZZY specify a signature match.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Code cleanup done for 2 purposes.
1. "index" variable is no more needed.
2. inline function makes it easier and safer to nest into a loop.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
In current implementation, when checking VF link state, PF state
is checked too, although the function has a parameter to tell
if PF state checking is needed.
But in some scenario, user may not care about the PF state.
This patch enables the unused parameter to only check the VF
link state.
Signed-off-by: Liang-Min Larry Wang <liang-min.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Hardware PTYPE in Rx desc will be parsed to fill mbuf's packet_type.
Signed-off-by: Ray Kinsella <ray.kinsella@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Device name resides in two different locations, in rte_device->name and
in ethernet device private data.
For now, the copy in the ethernet device private data is required for
multi process support, the name is the how secondary process finds about
primary process device.
But for drivers there is no reason to use the copy in the ethernet
device private data.
This patch updates PMDs to use only rte_device->name.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Since SSE4 is now part of minimum requirements for DPDK on x86, we no
longer need this fallback code.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Change the rte_eth_dev_callback_process function to return int,
and add a void *ret_param parameter.
The new parameter is used by ixgbe and i40e instead of abusing
the user data of the callback.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Fixing typos across dpdk source code using codespell utility.
Skipped the ethdev driver's base code fixes to keep the base
code intact.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Isolated mode can be requested by applications on individual ports to avoid
ingress traffic outside of the flow rules they define.
Besides making ingress more deterministic, it allows PMDs to safely reuse
resources otherwise assigned to handle the remaining traffic, such as
global RSS configuration settings, VLAN filters, MAC address entries,
legacy filter API rules and so on in order to expand the set of possible
flow rule types.
To minimize code complexity, PMDs implementing this mode may provide
partial (or even no) support for flow rules when not enabled (e.g. no
priorities, no RSS action). Applications written to use the flow API are
therefore encouraged to enable it.
Once effective, leaving isolated mode may not be possible depending on PMD
implementation.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
rte_driver->name has the driver name and all physical and virtual
devices has access to it.
Previously it was not possible for virtual ethernet devices to access
rte_driver->name field (because eth_dev used to keep only pci_dev),
and it was required to save driver name in the device private struct.
After re-works on bus and vdev, it is possible for all bus types to
access rte_driver.
It is able to remove the driver name from ethdev device private data and
use eth_dev->device->driver->name.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Jan Blunck <jblunck@infradead.org>
When the last fdir flow be destroyed, the flag "mask_added"
should be reset, so the remain mask info will not take effect
when a new flow be added.
Fixes: a14de8b498 ("net/ixgbe: destroy consistent filter")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Move all bypass functions to ixgbe pmd and remove function
pointers from the eth_dev_ops struct.
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch disables X550EM_X 1Gbase-t led_[on|off] support since
the LEDs are wired to the PHY and the driver can not access the
PHY. led_[on|off]
Support is disabled by setting the function pointer to NULL.
init_led_link_act is also set to NULL.
Signed-off-by: Wei Dai <wei.dai@intel.com>
This patch removes some some 1GBASE-T PHY access since the FW
configures the PHY. SW shall not configure or initialize link.
Accessing the PHY would require the use of MDI clause 22 which
should be avoided in high layer driver code.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Instead of many PMD define their own macro, define a generic one in
ethdev and use that in PMDs.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
remove __rte_unused instances that are not required.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
See: 8f094a9ac5 ("mbuf: set mbuf fields while in pool")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The vector PMD is very sensitive to the layout of the mbuf, especially on
the RX path. Add in some compile-time checks to make sure the mbuf layout
assumptions are valid, and to provide hints to anyone changing the mbuf
where things may need to be updated.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Different drivers use internal macros like force_inline for compiler
always inline feature.
Standardizing it through __rte_always_inline macro.
Verified the change by comparing the output binary file.
No difference found in the output binary file with this change.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
vfio is the kernel framework used by the vfio-pci kernel driver.
DPDK drivers do not rely solely on vfio, but rather on vfio-pci to gain
access to pci resources.
Fixes: 0880c40113 ("drivers: advertise kmod dependencies in pmdinfo")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
There is a bug in previous fix for lsc interrupt.
lsc interrupt is not disabled before delayed handler,
that cause the delayed handler be re-entered.
Fixes: 9b66721070 ("net/ixgbe: fix blocked interrupts")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
hw->mac.ops.get_media-type() of ixgbe VF is NULL and should not
be called directly. It had better be replaced by calling
ixgbe_get_media_type( ) to avoid crash.
Fixes: c12d22f65b ("net/ixgbe: ensure link status is updated")
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Laurent Hardy <laurent.hardy@6wind.com>
Add a comment documenting explicitly that we are falling through the case
statements to the next one.
Fixes: f9072f8b90 ("ixgbe: migrate flow director filtering to new API")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
For base code in drivers shared with other projects, disable the new
warnings from gcc 7 about unlabelled fall-through in switch statements.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Return mbuf points of _recv_raw_pkts_vec are modified out of bound.
Fixes: c95584dc2b ("ixgbe: new vectorized functions for Rx/Tx")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
There exists case that software sets mtu (i.e jumbo frame) of
ixgbe device when it's stopped. Before the fix, scattered_rx
is cleared during device stop, and setting jumbo frame mtu
after device stop will always fail as scattered_rx is 0.
Signed-off-by: Jia Yu <jyu@vmware.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Some customers find that 82599 NIC DPDK VF PMD can't receive any
broadcast packets when it is bound to igb_uio in the first time
to run a DPDK application like testpmd. But when the application
is quited and run again, the DPDK VF PMD can receive broadcast
packets again. The associated PF is run by kernel driver when
the VF is driven by DPDK PMD.
Fixes: 260e2e22e2 ("net/ixgbe/base: move multicast mode update")
Fixes: 72dec9e37a ("ixgbe: support multicast promiscuous mode on VF")
Cc: stable@dpdk.org
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Pool 0 is not PF, it's VF 0. So the MAC is set for VF 0
but not PF.
The code introduced a weird issue. In the scenario PF + VF,
when only starting PF, the default PF MAC address is working.
But after starting a VF, the default PF MAC address becomes
the VF's address.
Use the pool which is not occupied by VFs for PF to fix it.
Fixes: 8164fe8284 ("ixgbe: add default mac address modifier")
Cc: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Some customers find adding MAC addr to VF sometimes can fail,
but it is still stored in dev->data->mac_addrs[ ]. So this
can lead to some errors that assumes the non-zero entry in
dev->data->mac_addrs[ ] is valid.
Following acknowledgements are from specific NIC PMD
maintainer for their managing part.
This patch changes the ethdev internal API, it should not be
backported to a stable/LTS release so far.
Fixes: af75078fec ("first public release")
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
To achieve functionality of retrieving only specific statistics
given by application there are two new functions added:
ixgbe_dev_xstats_get_by_ids() which retrieve
values of statistics specified by ids array
and ixgbe_dev_xstats_get_names_by_ids() which retrieve
names of statistics specified by ids array.
Signed-off-by: Kuba Kozak <kubax.kozak@intel.com>
Revert patches to provide clear view for
upcoming changes. Reverted patches are listed below:
commit ea85e7d711 ("ethdev: retrieve xstats by ID")
commit a954495245 ("ethdev: get xstats ID by name")
commit 1223608adb ("app/proc-info: support xstats by ID")
commit 25e38f09af ("net/e1000: support xstats by ID")
commit 923419333f ("net/ixgbe: support xstats by ID")
Signed-off-by: Kuba Kozak <kubax.kozak@intel.com>
Add the support of RTE_FLOW_ITEM_TYPE_SCTP type packet for
ixgbe ntuple filter.
Fixes: 672be56d76 ("net/ixgbe: parse n-tuple filter")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
In case of fiber and link speed set to 1Gb at peer side (with autoneg
or with defined speed), link status could be not properly updated at
time cable is plugged-in.
Indeed if cable was not plugged when device has been configured and
started then link status will not be updated properly with new speed
as no link setup will be triggered.
To avoid this issue, IXGBE_FLAG_NEED_LINK_CONFIG is set to try a link
setup each time link_update() is triggered and current link status is
down. When cable is plugged-in, link setup will be performed via
ixgbe_setup_link().
Signed-off-by: Laurent Hardy <laurent.hardy@6wind.com>
Acked-by: Wei Dai <wei.dai@intel.com>
The type check for flow_type should be IXGBE_ATR_FLOW_TYPE_IPV4
in special card not RTE_ETH_FLOW_NONFRAG_IPV4_OTHER.
Fixes: dc0c16105d ("ixgbe: fix X550 flow director check")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
When Receive Side Coalescing (RSC) is not used, the RSC Disable
(RSC_DIS) filed of register Receive Filter Control Register (RFCTL)
should be set according to ixgbe datasheet.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
* Acquire PHY semaphore before device reset
* Add support for 2.5G KX physical layer
* Add MAC X550em/X557 LED on|off support
Signed-off-by: Wei Dai <wei.dai@intel.com>
This patch updates ixgbe_led_[on|off]_t_X550em for MAC or PHY connected
LEDs. To support both MAC or PHY connected LEDs, both MAC and PHY led
control registers are configured.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Add another define for the 2.5G KX physical layer. This requires all
variables and support functions that deal with "physical_layer" to be
bumped to u64 as this is the 33rd define.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
A recent firmware change fixed an issue to acquire the PHY semaphore
before accessing PHY registers. This led to a case where SW can issue
a device reset clearing the MDIO registers. This patch makes SW acquire
the PHY semaphore before issuing a device reset.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
To achieve functionality of retrieving only specific statistics
given by application there are two new functions added:
ixgbe_dev_xstats_get_by_ids() which retrieve
values of statistics specified by ids array
and ixgbe_dev_xstats_get_names_by_ids() which retrieve
names of statistics specified by ids array.
Signed-off-by: Jacek Piasecki <jacekx.piasecki@intel.com>
Signed-off-by: Kuba Kozak <kubax.kozak@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
DPDK community has several emails discussion on this topic,
these mails link is bellow:
http://dpdk.org/ml/archives/dev/2017-March/060379.html,
http://dpdk.org/ml/archives/dev/2017-March/060295.html,
items like VLAN can already have several valid "types"
(0x88a8, 0x8100, 0x9100), and who knows what will come up
in the future.
And ixgbe_flow just ignores the types when do filter configuration.
So it may be reasonable to delete the related tpid check process.
Also add some more comment log on stack explanation.
Fixes: 11777435c7 ("net/ixgbe: parse flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Fix generic filter return info is not readable
when repeat to create a rule.
Fixes: 72c135a89f ("net/ixgbe: create consistent filter")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Create a new file rte_pmd_ixgbe.c for all the private
APIs. Move all the related code to the new file.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Having packets received without any offload flags given in the mbuf is not
very useful, and performance tests with testpmd indicates little
benefit is got with the current code by turning off the flags. This makes
the build-time option pointless, so we can remove it.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
With the mbuf rework, we now have 8 contiguous bytes to be rearmed in the
mbuf just before the 8-bytes of olflags. If we don't do the rearm write
inside the descriptor ring replenishment function, and delay it to
receiving the packet, we can do a single 16B write inside the RX function
to set both the rearm data, and the flags together.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The patch change the prototype of callback function
(rte_intr_callback_fn) by removing the unnecessary parameter.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
To avoid multiple stores on fast path, Ethernet drivers
aggregate the writes to data_off, refcnt, nb_segs and port
to an uint64_t data and write the data in one shot
with uint64_t* at &mbuf->rearm_data address.
Some of the non-IA platforms have store operation overhead
if the store address is not naturally aligned.This patch
fixes the performance issue on those targets.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Now that the m->next pointer and m->nb_segs is expected to be set (to
NULL and 1 respectively) after a mempool_get(), we can avoid to write them
in the Rx functions of drivers.
Only some drivers are patched, it's not an exhaustive patch. It gives
the idea to do the same in other drivers.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Document the function and make it public, since it is used at several
places in the drivers. The old one is marked as deprecated.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Ixgbe supports to set the relative bandwidth for the TCs.
It's a global setting for the PF and all the VFs of a
physical port.
This feature provide the API to set the bandwidth.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
To add a wrapper function to remove the limit of tx burst size and
implement the "make an best effort to transmit the pkts" policy.
The patch makes ixgbe vec function work in a consistent behavior
like ixgbe_xmit_pkts_simple and ixgbe_xmit_pkts do that.
Cc: Helin Zhang <helin.zhang@intel.com>
Cc: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
4 and 8 TCs are supported on ixgbe. By default there're
8 TCs. So when initializing the device, the bandwidth for
8 TCs is set.
When changing the TC number, it's only considered setting
the bandwidth for 4 TCs. If the user change the number
from 4 to 8, the TCs' bandwidth is not right.
Fixes: 0807f80d35 ("ixgbe: DCB / flow control")
Cc: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Without setting the id, calling xstats_get twice with same array causes
memory corruption.
Also, if IXGBEVF_NB_XSTATS will be different than 1 in the future,
this will cause issues.
Fixes: 156712ba40 ("ixgbevf: add extending stats")
Signed-off-by: Ido Barnea <ibarnea@cisco.com>
All kinds of filter need to hardware mac type check
to make sure the hardware support that type of filter.
If not, it may cause serious issue.
Fixes: 11777435c7 ("net/ixgbe: parse flow director filter")
Fixes: 672be56d76 ("net/ixgbe: parse n-tuple filter")
Fixes: eb3539fc85 ("net/ixgbe: parse ethertype filter")
Fixes: 429f6ebb42 ("net/ixgbe: parse TCP SYN filter")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Move ixgbe 2 mac type check macros to ixgbe_ethdev.h in
order to be used by filter parser functions in file
ixgbe_flow.c.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Delete useless function declarations in file ixgbe_flow.c and
adjust function definition position to avoid compile error.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
In SRIOV case, ETH_MQ_RX_VMDQ_DCB and ETH_MQ_RX_DCB should be considered as
the same meaning, due to the multi-queue mapping is the same SRIOV and VMDq
in ixgbe.
Fixes: 27b609cbd1 ("ethdev: move the multi-queue mode check to specific drivers")
Cc: stable@dpdk.org
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
DCB is split to RX and TX mode. All-queues-drop is set for TX mode.
It's not appropriate because all-queue-drop is a RX feature.
Move this setting from TX to RX.
Fixes: f3f9b17bb8 ("net/ixgbe: support multiqueue mode VMDq DCB with SRIOV")
Cc: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The function is not defined anywhere, remove it.
Fixes: 0eb609239e ("ixgbe: enable Rx queue interrupts for PF and VF")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
In the IOV scenario, multi Rx queues can be assigned to one VF.
If the dropping is not enabled, when no descriptors are available
for one queue, this queue can block others.
Fixes: 00e30184da ("ixgbe: add PF support")
Cc: stable@dpdk.org
Suggested-by: Liang-Min Larry Wang <liang-min.wang@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
* Add link block check for KR.
* Complete HW initialization even if SFP is not present.
* Add VF xcast promiscuous mode.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Fix ICC build error by removing the EWARN third parameter.
Build error:
.../drivers/net/ixgbe/base/ixgbe_phy.c(1543):
error #268: the format string ends before this argument
EWARN(hw, "WARNING: Intel (R) Network "
^
.../drivers/net/ixgbe/base/ixgbe_phy.c(1805):
error #268: the format string ends before this argument
EWARN(hw, "WARNING: Intel (R) Network "
^
Fixes: aa4fc14d2c ("ixgbe: update base driver")
Fixes: b94a06c1b4 ("ixgbe/base: support qsfp and lco")
Cc: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add the support of xcast promiscuous mode. It's
added in mailbox v1.3.
Move the definition of xcast mode to base code.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Disable Ethernet Flow Control (FC) for device 15B0.
Make sure that ixgbe_device_supports_autoneg_fc()
returns false and hw->fc.disable_fc_autoneg is set
to true to avoid running the fc_autoneg function
for the device 15B0, as this device doesn't support
this function.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
If SFP module is not present, reset_hw doesn't return success.
SW should complete the initialization, or with specific module
it resulted in no link when the module was later inserted.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add a L3/L4 filtering definition of Multiple Receive Queues Command
(MRQC) register for the future use.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
When setting up link on x550 KR devices, should check
if there are constraints on link from manageability, which
may result in link loss.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Before this patch, the management of dependencies between directories
had several issues:
- the generation of .depdirs, done at configuration is slow: it can take
more than one minute on some slow targets (usually ~10s on a standard
PC without -j).
- for instance, it is possible to express a dependency like:
- app/foo depends on lib/librte_foo
- and lib/librte_foo depends on app/bar
But this won't work because the directories are traversed with a
depth-first algorithm, so we have to choose between doing 'app' before
or after 'lib'.
- the script depdirs-rule.sh is too complex.
- we cannot use "make -d" for debug, because the output of make is used for
the generation of .depdirs.
This patch moves the DEPDIRS-* variables in the upper Makefile, making
the dependencies much easier to calculate. A DEPDIRS variable is still
used to process library dependencies in LDLIBS.
After this commit, "make config" is almost immediate.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Tested-by: Robin Jarry <robin.jarry@6wind.com>
Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The check of queue_id is done in all drivers implementing
rte_eth_rx_queue_count(). Factorize this check in the generic function.
Note that the nfp driver was doing the check differently, which could
induce crashes if the queue index was too big.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Use vlan_mask->tci as big endian since this is how rte flow defines it.
Fixes: 11777435c7 ("net/ixgbe: parse flow director filter")
Fixes: 37ed39b4e6 ("net/ixgbe: add TCI mask check for flow director")
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Vector PMD will check 4 descs in one time, but the statuses are not
consistent because the memory allocated for RX descriptors is cacheable
huagepage.
This patch is to calculate the number of received packets by scann DD bit
sequentially, and stops when meeting the first packet with DD bit unset.
Fixes: b20971b6cc ("net/ixgbe: implement vector driver for ARM")
Cc: stable@dpdk.org
Signed-off-by: Jianbo Liu <jianbo.liu@linaro.org>
To get better performance, Rx bulk alloc recv function will scan 8 descs
in one time, but the statuses are not consistent on ARM platform because
the memory allocated for Rx descriptors is cacheable hugepages.
This patch is to calculate the number of received packets by scan DD bit
sequentially, and stops when meeting the first packet with DD bit unset.
Fixes: 7431041062 ("ixgbe: allow rx bulk alloc")
Cc: stable@dpdk.org
Signed-off-by: Jianbo Liu <jianbo.liu@linaro.org>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
dev_flags is wrongly overwritten with RTE_ETH_DEV_DETACHABLE value
in drivers after rte_eth_copy_pci_info().
Previous values of the dev_flags set in rte_eth_copy_pci_info(),
like RTE_ETH_DEV_INTR_LSC, are get lost. That will fail the device
configuration.
Fix by preventing dev_flags overwritten.
Fixes: 22dda618c0 ("pci: separate detaching ethernet ports from PCI devices")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Jeff Guo <jia.guo@intel.com>
For PMD specific API it is required to check if provided port id is for
a supported device.
It's not appropriate to call rte_eth_dev_info_get in PMD, as
rte_eth_dev_info_get need to get info from PMD.
Remove rte_eth_dev_info_get from PMD code and get the info directly.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
VNI of VXLAN is parsed wrongly. The root cause is that
VNI array in VXLAN item also uses network byte ordering.
Fixes: 11777435c7 ("net/ixgbe: parse flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Add more check on the tci mask of VLAN and VXLAN parser
in fdir filter rule pattern parser. If such check not added,
it maybe cause error in fdir configuration set check.
Fixes: 11777435c7 ("net/ixgbe: parse flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Current ixgbevf driver get max_rx_pktlen = 15872, but in fact PF
supports 15872-byte jumbo frame and VF only supports 9728-byte jumbo
frame. If VF is running DPDK driver and set frame_size > 9728 ,PF
running kernel ixgbe driver will report an error and set VF failed.
This patch fixs DPDK ixgbevf driver to get correct jumbo frame size
of VF.
More datasheet references from Wei Dai:
In 82599 datasheet, there is an annotation in the chapter 1.3 Features
Summary (page 29)
The 82599 supports full-size 15.5 KB (15872-byte) jumbo packets while
in a basic mode of operation. When DCB mode is enabled,
or security engines enabled or virtualization is enabled, the 82599
supports 9.5 KB (9728-byte) jumbo packets.
In x540 datasheet, there is also an annotation in the chapter 1.3
Features Summary (page 13)
The X540 and 82599 support full-size 15.5 KB jumbo packets while in a
basic mode of operation. When DCB mode is enabled,
or security engines enabled, or virtualization is enabled, or OS2BMC is
enabled, then the X540 supports 9.5 KB jumbo packets.
Packets to/from MC longer than 2KB are filtered out.
In x550 datasheet, there is still also an annotation in the chapter 1.4
Feature Summary (page 23)
All the products support full-size 15.5 KB jumbo packets while in a
basic mode of operation. When DCB mode is enabled, or security
engines enabled, or virtualization is enabled, or OS2BMC is enabled,
then only 9.5 KB jumbo packets are supported. Packets to/
from the MC longer than 2 KB are filtered out.
Fixes: 2144f6630f ("ixgbe: add redirection table size in device info")
Cc: stable@dpdk.org
Signed-off-by: Yi Zhang <zhang.yi75@zte.com.cn>
Acked-by: Wei Dai <wei.dai@intel.com>
Add checks to rte_pmd_ixgbe_macsec_* APIs to ensure that the
port is an ixgbe port.
Fixes: b35d309710 ("net/ixgbe: add MACsec offload")
Cc: stable@dpdk.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Ignore the error=IXGBE_ERR_SFP_NOT_PRESENT when SFP is not present.
If it is not ignored, testpmd will fail during the NIC initialization
process.
Ixgbe kernel driver ignores this error and works well. So DPDK
does same thing.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
While handling link status change (LSC) interrupt, all interrupts are
blocked until delayed interrupt handler finishes.
The wait duration is at least one second and this may cause timeouts in
VF to PF mailbox.
Make sure only LSC interrupt is blocked while waiting for delayed
interrupt handler to finish.
Fixes: 0a45657a67 ("pci: rework interrupt handling")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Replace the raw I/O device memory read/write access with eal
abstraction for I/O device memory read/write access to fix
portability issues across different architectures.
CC: Helin Zhang <helin.zhang@intel.com>
CC: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This patch adds a function to flush all the filter list
filter on a port.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
This patch adds a function to destroy the flow filter.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
This patch adds a function to create the flow directory filter.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
check if the rule is a flow director rule, and get the flow director info.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
check if the rule is a L2 tunnel rule, and get the L2 tunnel info.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
check if the rule is a TCP SYN rule, and get the SYN info.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
check if the rule is a ethertype rule, and get the ethertype info.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
Add rule validate function and check if the rule is a n-tuple rule,
and get the n-tuple info.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
Add support for flush all the filters in SW.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
Add support for store and restore L2 tunnel filter in SW.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
Add support for restoring L2 tunnel filter in SW.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
Add support for storing flow director filter in SW.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
Add support for restoring TCP SYN filter in SW.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
Add support for restoring ether type filter in SW.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
Add support for restoring n-tuple filter in SW.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
Add support for storing L2 tunnel filter in SW.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
Add support for storing flow director filter in SW.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
Add support for storing TCP SYN filter in SW.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
Set the MDIO (Management Data Input/Output Interface) read/write
function pointers for Marvell PHYs on some X550 platforms to use
the clause 22 functions. Marvell PHYs do not support clause 45.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Add initial support for Marvell 1000BASE-T PHYs on some X550 platforms.
Firmware owns the link config for Marvell PHYs on these platforms,
software should not touch it.
Also these platforms are not capable of speeds lower than 1Gb.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Ensure that the advertised link speeds are configured for KR/KX
backplane on some new platform.
Without this patch the link remains at 1G when resuming from low power
after being downshifted by LPLU (Low Power Link Up).
This patch ensures that the advertised speeds are not changed for
2.5G configurations.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Add initial support for a XFI backplane interface on some new platforms.
The XFI backplane requires a custom tuned link. Hardware/Firmware owns
the link config for XF backplane and software must not interfere.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Add checks to rte_pmd_ixgbe_* API's to ensure that the port
is an ixgbe port.
Fixes: 49e248223e ("net/ixgbe: add API for VF management")
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The function name ixgbe_vmdq_mode_check is not right.
This function checks if Virtualization Technology is
enabled. It's for both VMDq and IOV.
Others may be misled by the current name.
Fixes: fe3a45fd41 ("ixgbe: add VMDq support")
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
The only reason why bulk alloc disabled for the rings with
more than (IXGBE_MAX_RING_DESC - RTE_PMD_IXGBE_RX_MAX_BURST)
descriptors is the possible out-of-bound access to the dma
memory. But it's the artificial limit and can be easily
avoided by allocating of RTE_PMD_IXGBE_RX_MAX_BURST more
descriptors in memory. This will not interfere the HW and,
as soon as all rings' memory zeroized, Rx functions will
work correctly.
This change allows to use vectorized Rx functions with
4096 descriptors in Rx ring which is important to achieve
zero packet drop rate in high-load installations.
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Removed unused "reg_info" global variable from ixgbe driver.
cat build/app/testpmd.map | grep "Allocating common symbols" -A 15
Allocating common symbols
Common symbol size file
reg_info 0x18 build/lib/librte_pmd_ixgbe.a(ixgbe_ethdev.o)
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Update the version of shared codes to cid-ixgbe.2016.11.21.tar.gz,
All files in net/ixgbe/base are developed by another team and
DPDK PMD uses them accordingly.
Signed-off-by: Wei Dai <wei.dai@intel.com>
This patch updates the configuration of PHY from Inphi (www.inphi.com)
to flush the register write with a reg read.
The Inphi PHY is configured in ixgbe_setup_mac_link_sfp_x550a.
The Inphi PHY setup flow has been updated to read configuration reg,
write only linear/non-linear, and then read (write flush).
Signed-off-by: Wei Dai <wei.dai@intel.com>
This register was incorrect when compared to the data sheet.
Even though the driver doesn't currently use this register,
it is better to fix it upstream.
Fixes: af75078fec ("first public release")
Signed-off-by: Wei Dai <wei.dai@intel.com>
This patch adds Energy Efficient Ethernet (EEE) support for
some Marvell PHYs on some future platforms.
Because EEE capability or status was not indicated previously,
this patch simply assumes that it is supported.
As soon as there is a PHY that does not support EEE, there will
be defects in this area because the driver will not report the
EEE status correctly.
This also deletes some now-unused definitions from an earlier
Marvell PHY implementation and combines a device ID check into a
switch statement.
Signed-off-by: Wei Dai <wei.dai@intel.com>
This patch removes the flow control conversion from Rx and Tx to pause
and asymmetric pause, as that is handled by the ixgbe_negotiate_fc().
Performing the conversion prior to ixgbe_negotiate_fc() results in
an incorrect fc mode if Rx only pause is selected when the link partner
is advertising Tx.
Signed-off-by: Wei Dai <wei.dai@intel.com>
